Database Info

[ROM][UNOFFICIAL][4.4.4][GT-I9105/P][M12] Cyanogenmod 11.0 [2016/06/15]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo.
Device-specific source code for the Samsung Galaxy S II Plus:
https://github.com/ghsr/android_device_samsung_galaxys2plus-common
https://github.com/ghsr/android_device_samsung_i9105p
https://github.com/ghsr/proprietary_vendor_samsung_galaxys2plus-common
https://github.com/ghsr/android_kernel_samsung_galaxys2plus-common
Compatibilitiy patches:
https://github.com/doriandiaconu/android_build-tools_galaxys2plus-common
Do not submit bugs on CyanogenMod issue tracker
Downloads
ROM: https://basketbuild.com/devs/DorianDiaconu/CM11
GApps: http://wiki.cyanogenmod.org/w/Gapps
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera (photo & video)
Video playback
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Issues
Known device specific Issues
screenrecord does not work
Stock browser does not use hardware acceleration (Please use Firefox, Google Chrome, Dolphin, etc)
Known Sources Issues
Bluetooth Headset not working
FM Radio does not work (you can use SpiritFM, but I'm not providing support for any problem)
Does not work on 4.1 stock ROM's bootloader, please upgrade to 4.2 before flashing
Installation
Make a backup!
Make sure you are rooted
Be sure that you have the 4.2.2 bootloader
Install a custom recovery
Install the ROM using your custom recovery
Optionally install the Google Apps Addon
Wipe data if coming from stock
Don't submit bugs to me, if you didn't do a full wipe and you are coming from another ROM
For GT-I9105 flash NFC destroyer by @GHsR
FAQ
Can you include Feature X into your ROM?
No. This ROM will have CyanogenMod's feature set.
Can you include S-Note/S-Planner/MultiWindow/Insert Samsung App Here?
No. This is an AOSP ROM and cannot have TouchWiz applications.
Can you include call recording?
No. CyanogenMod does not include call recording to avoid potential legal issues.
Can you add Feature X to the stock ROM?
No. I don't work on stock ROMs.
What kernel does this ROM use?
A slightly modified version of the stock kernel, the source code is linked above.
I've heard that Broadcom doesn't release source, how can you make this ROM?
Contrary to the popular belief, userspace driver source code is not always required to make an AOSP-based ROM as long as the proprietary binaries shipped with the device does not modify the API too heavily (or is from a very different version of Android). Instead of modifying the source code of the drivers, the Android source code was adapted to be able to use the proprietary binaries.
Can I use your ROM as a base?
http://source.android.com/source/licenses.html
Most of Android/CyanogenMod is licensed under the Apache License with other small parts licensed under other open-source licenses. Which means that you may modify and redistribute without asking for permission as long as the proper credits is given and it is not misappropriated as being the official CyanogenMod. (In other words, you must say that it is based on pawitp's unofficial CyanogenMod, but is not related to CyanogenMod in any other way.)
Reporting bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. The following is a useful format to follow.
Code:
What is your:
- Phone model (I9105 or I9105P):
- Radio (baseband):
- CM version:
- CM Download URL:
- GApps version:
Did you:
- Wipe:
- Restore with titanium backup:
- Reboot after having the issue:
Are you using:
- A task killer:
- A non-stock kernel:
- CMSettings/Performance settings (other than stock):
- Other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Screenshots
F2FS
From CM 11.0 M10, it is supposed to be compatible with LuK1337 's EXT to F2FS ROM converter:
http://forum.xda-developers.com/galaxy-s2-plus/development/linux-ext-to-f2fs-rom-converter-t2840303
Thanks
- The CyanogenMod team for providing a great ROM. Without all the compatibility work which went into it, this ROM would've been much harder to make
- @pawitp - for patches
- @CoolDevelopment, @LuK1337, @GHsR, @andixlm, @beastaki23 and other I9105/P and I9082 devs
If you like it, use it and don't forget to press the "Thanks" button or send me a beer via PayPal.
XDA:DevDB Information
[M12] Cyanogenmod 11.0, ROM for the Samsung Galaxy S II Plus
Contributors
doriandiaconu
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.2.2
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-03-26
Created 2015-05-20
Last Updated 2016-07-16

New version online. Which would probably be the last version of CM11. It isn't really getting many updates.
Changelog:
- New device tree (with CM12 changes).
- Nebula kernel
- Optimized with ArchiDroid (Thanks to @JustArchi)
- ROM and kernel optimized with Linaro.
Thanks @GHsR for the help and @haky 86 for help in some technical problems.
This ROM is now as speedy as it could be. Both i9105/p are uploaded.
Gonna resurrect PAC/AOSPA KK now.

is the stock browser hardware accelerated ? or it remains an issue even after changing the tree ?

doriandiaconu said:
New version online. Which would probably be the last version of CM11. It isn't really getting many updates.
Changelog:
- New device tree (with CM12 changes).
- Nebula kernel
- Optimized with ArchiDroid (Thanks to @JustArchi)
- ROM and kernel optimized with Linaro.
Thanks @GHsR for the help and @haky 86 for help in some technical problems.
This ROM is now as speedy as it could be. Both i9105/p are uploaded.
Gonna resurrect PAC/AOSPA KK now.
Click to expand...
Click to collapse
Vibration is not working..atleast for me..great rom tho

DenisRonaldo798 said:
Vibration is not working..atleast for me..great rom tho
Click to expand...
Click to collapse
It's really because of the device tree. It isn't compatible with nebula kernel.

bloodofJesus said:
I saw a patch for vibration fix for nebula on github, does that not work ?
Click to expand...
Click to collapse
The device tree itself doesn't include the VibrationHW.java and I forgot to add it.

bloodofJesus said:
Wow, I'm utterly impressed, the speed is impressive, too bad archidroids optimizations don't work on lollipop , is it just me or lollipop is too heavy for the s2 plus ?
Click to expand...
Click to collapse
They should be working on LP. I'm getting some assembler errors at the moment. Hope to sort them out fast.

good job
doriandiaconu said:
The device tree itself doesn't include the VibrationHW.java and I forgot to add it.
Click to expand...
Click to collapse
hello @doriandiaconu,
you think that you can rewrite the ROM with support for vibration? because I think that this ROM is the best for our samsung s2 plus.
I believe that the best ROM in performance for this phone is the Cyanogenmod based on kitkat that is faster and more stable for constant use over time
I have tried both the ROM [5.1.1] Resurrection Remix® Lollipop v5.4.5 and the ROM [5.1.1] CandyRoms Candy5 Lollipop for GT-i9105 / P V2.5.1
It' true that these ROMs (lollipop) are nice with lots of features, but after a while of using, the phone is slow especially the dialer and often become almost unusable until the next reboot
---------- Post added at 05:01 PM ---------- Previous post was at 04:30 PM ----------
bloodofJesus said:
Wow, I'm utterly impressed, the speed is impressive, too bad archidroids optimizations don't work on lollipop , is it just me or lollipop is too heavy for the s2 plus ?
Click to expand...
Click to collapse
yes, I think like you that lollipop is too heavy for our phone...

problem with images
hello, after I have installed this version of ROM with the pico Gapps in the links below [new edit], many icons and images in google playstore are corrupted? any of you have this problem?
thanks
[edit]
I understood the problem: is't the new version of google playstore
In fact, taking a file with an older version of gapps the problem does not occur
[new edit]
sorry, but I committed an error when writing above. the gapps that I used the first time are the 5.1.x on the link http://forum.xda-developers.com/paranoid-android/general/5-1-x-5-0-x-4-4-x-pa-gapps-mirror-t3069879
I used the PICO version with an updated version of play store & play services
while those of the first page of this treat work great (but there are not the PICO version)

cappoccia said:
hello @doriandiaconu,
you think that you can rewrite the ROM with support for vibration? because I think that this ROM is the best for our samsung s2 plus.
I believe that the best ROM in performance for this phone is the Cyanogenmod based on kitkat that is faster and more stable for constant use over time
I have tried both the ROM [5.1.1] Resurrection Remix® Lollipop v5.4.5 and the ROM [5.1.1] CandyRoms Candy5 Lollipop for GT-i9105 / P V2.5.1
It' true that these ROMs (lollipop) are nice with lots of features, but after a while of using, the phone is slow especially the dialer and often become almost unusable until the next reboot
---------- Post added at 05:01 PM ---------- Previous post was at 04:30 PM ----------
yes, I think like you that lollipop is too heavy for our phone...
Click to expand...
Click to collapse
I will try to do it.

If I am not wrong vibration is work on this tree
https://github.com/hak86/android_device_samsung_s2vep/blob/cm-11.0/
at last IF i have port the new kernel successfully I will try to update kitkat version too xD

haky 86 said:
If I am not wrong vibration is work on this tree
https://github.com/hak86/android_device_samsung_s2vep/blob/cm-11.0/
at last IF i have port the new kernel successfully I will try to update kitkat version too xD
Click to expand...
Click to collapse
But it wasn't on the one ghsr did. I'm not using vibration so I didn't really intend to keep it XD

file gapps
bloodofJesus said:
I have this problem as well, which gapps did you use to fix this problem ? could you link it please ? thanks. @bloodofJesus
hello, these are oK: https://www.androidfilehost.com/?fid=23311191640114013
note that you need to re-flash the rom with the new gapps file
Click to expand...
Click to collapse

Cyanogenmod 11 CM12 - BEST SCORE for s2 plus
This ROM gives the best ANTUTU BENCHMARK score for this device: 14150
with lollipop 5.1.1 the score was from 12800 to 13100
This rom is confirmed as the fastest for this phone! if there was the vibration and adaptive brightness would be the best!

cappoccia said:
This ROM gives the best ANTUTU BENCHMARK score for this device: 14150
with lollipop 5.1.1 the score was from 12800 to 13100
This rom is confirmed as the fastest for this phone! if there was the vibration and adaptive brightness would be the best!
Click to expand...
Click to collapse
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please

TyMoOteUuSz said:
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please
Click to expand...
Click to collapse
True, I want to install this rom, but without vibration I can't do anything

help for Adaptive brightness
TyMoOteUuSz said:
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please
Click to expand...
Click to collapse
the problem is that when I check it, it simply doesn't work....do you have an idea? you think it could be the language settings of the device?
I will try to change to a different language...
[edit]
with english language, same result: doesn't work.
how did you se it's working? have you tried to set the backlight to low level and then see how it's light automatically?

TyMoOteUuSz said:
Adaptive brightness works nice for me, so what's the problem?
But I miss vibrations so much, how could such a perfect ROM have no vibrations? We need it, guy, do sth with it, please
Click to expand...
Click to collapse
I will fix vibration and adaptive brightness. Just give me some time. I got a few exams in this period. I'm also trying to fix the LP builds.

cappoccia said:
the problem is that when I check it, it simply doesn't work....do you have an idea? you think it could be the language settings of the device?
I will try to change to a different language...
[edit]
with english language, same result: doesn't work.
how did you se it's working? have you tried to set the backlight to low level and then see how it's light automatically?
Click to expand...
Click to collapse
Ye, I've set brightness to the lowest possible, and was slowly making it brighter and brighter, and - as my settings app is white with dark-green header - the header turned completely black, and it simply worked XD or maybe it's just me understanding the ,,adaptive brightness'' wrong, sorry if so.

TyMoOteUuSz said:
Ye, I've set brightness to the lowest possible, and was slowly making it brighter and brighter, and - as my settings app is white with dark-green header - the header turned completely black, and it simply worked XD or maybe it's just me understanding the ,,adaptive brightness'' wrong, sorry if so.
Click to expand...
Click to collapse
unfortunately when I enable the adaptive backlight the screen remains dark and does not light as in other ROM I tried....
---------- Post added at 03:04 PM ---------- Previous post was at 03:02 PM ----------
doriandiaconu said:
I will fix vibration and adaptive brightness. Just give me some time. I got a few exams in this period. I'm also trying to fix the LP builds.
Click to expand...
Click to collapse
Many Thanks! I will wait for your new versione. good luck for your exams

[CM11]Best CM 11 ROM for K30-T or A6000

CyanogenMod™ is a free, community built, after-market firmware distribution of Android™ 4.4.4 (KitKat™), which is designed to increase Performance, Stability, and reliability over stock Android for your device.
CyanogenMod™ is based on the Android™ Open Source Project with extra contributions from many people within the Android™ community. It can be used without any need to have any Google™ application installed. Linked below is a package that has come from another Android™ project that restore the Google™ parts. CyanogenMod™ does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This version of CyanogenMod also came with Lollipop ™ Thame, it looks like well. It's fast!
Support Phones
------------------------------
Lenovo™ A6000 [I have Not Tested] [Tested by xda_borj]
Lenovo™ K30-T [Tested]
Download
------------------------------
ROM :
http://d.7to.cn/download.aspx?actio...C3jC932bOB15crvHCglWDcXO3gwoiphK8NAp0sS2MJA==
GApps:
http://opengapps.org
Select:
-arm/arm64
-4.4
-Pico
Bugs
------------------------------
- Can't get Internet [Thanks for xda_borj]
About the ROM
People Created: X神之怒
People ‘Last’ Created: Ricky844
First Release Date: 2015-06-11
Support Phones: Lenovo K30-T, A6000
Found the ROM on: 奇兔ROM市

Frequently asked questions
Q : I get error 255 while flashing from recovery
A : Flash using correct TWRP Download it Here!
(Only for K30-T)
Q : Is it support Xposed?
A:Installed.
Q : Can I install SuperSU or Magisk?
A:Installed too. (SuperSU Installed.)
Q : Who made this ROM?
A : Someone in China, I am going to make new version for this ROM.
Q : Why I can't get signal when I using this ROM?
A: If you are using China Internet, it will have signal.

KoChangelog:
-Update 1 2015-06-11 :
Got ROOT super license
New Xposed framework, more powerful
Add Xblast tools, a number of advanced settings
Add gravity toolbox, hundreds of custom functions
Add green guardian, guard your program, perfect power control
Support lock screen shortcuts custom widget changes
Support to modify the theme style, fonts, sound effects package
Support the status bar to modify the clock style, battery style
Support drop-down notification bar Custom modify quick settings, floating notification
Support DSP music effects
Support font size and interactive screen warranty changes
Support stand-alone double-click long HOME key and menu key custom changes
Support processor, IO scheduling modification
Support memory management, adjust the background occupied
Needless to say the overall fluid, suitable for smooth use of oil
-Update 1.1 2017-01-21 :
Get latest version of Xposed and SuperSU
Add 1 Ringtone
Download : File missing

Holo CM 11 download:
http://d.7to.cn/download.aspx?actio...7mHa7UtzA89edqoV+IeSS7khJUUTnxbkaNySCG6S6Yg==

You need to post screenshots. Also, may I ask who made this ROM?

xda_borj said:
You need to post screenshots. Also, may I ask who made this ROM?
Click to expand...
Click to collapse
Oh!Yeah, I forgot to said it's someone made.Soneone in China.

Ricky Chrung said:
Oh!Yeah, I forgot to said it's someone made.Soneone in China.
Click to expand...
Click to collapse
I am going to make new version to this rom, ask me if anything

Ricky Chrung said:
Oh!Yeah, I forgot to said it's someone made.Soneone in China.
Click to expand...
Click to collapse
Ricky Chrung said:
I am going to make new version to this rom, ask me if anything
Click to expand...
Click to collapse
It would be great if you put the version of Android this ROM was based and the date it was created or updated. Anyway, how about screenshots? Thank you in advance.

xda_borj said:
It would be great if you put the version of Android this ROM was based and the date it was created or updated. Anyway, how about screenshots? Thank you in advance.
Click to expand...
Click to collapse
OK! Thanks for asking about Screenshots,I will upload that when I open my computer.

Ricky Chrung said:
OK! Thanks for asking about Screenshots,I will upload that when I open my computer.
Click to expand...
Click to collapse
Great! How about editig your post and put Android version and the date the ROM created?

xda_borj said:
Great! How about editig your post and put Android version and the date the ROM created?
Click to expand...
Click to collapse
Thanks for asking, I will do that later

Ricky Chrung said:
CyanogenMod is a free, community built, after-market firmware distribution of Android 4.4.4 (KitKat), which is designed to increase Performance, Stability, and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Support Phones
------------------------------
Lenovo A6000 [Not Tested]
Lenovo K30-T [Tested]
Download
------------------------------
ROM :
http://d.7to.cn/download.aspx?actio...C3jC932bOB15crvHCglWDcXO3gwoiphK8NAp0sS2MJA==
GApps:
http://opengapps.org
Select:
-arm/arm64
-4.4
-Pico
Click to expand...
Click to collapse
People Created: X神之怒
First Release Date: 2015-06-11
Support Phones: Lenovo K30-T, A6000

Ricky Chrung said:
Thanks for asking, I will do that later
Click to expand...
Click to collapse
Thanks! By the way, I tested your ROM on my Lenovo A6000. All I can say that the ROM is good. However, there's no signal. There's a problem with SIM network. I can't get any signal. I hope this helps.

xda_borj said:
Thanks! By the way, I tested your ROM on my Lenovo A6000. All I can say that the ROM is good. However, there's no signal. There's a problem with SIM network. I can't get any signal. I hope this helps.
Click to expand...
Click to collapse
Q : Why I can't get signal when I using this ROM?
A: If you are using China Internet, it will have signal.

Ricky Chrung said:
Q : Why I can't get signal when I using this ROM?
A: If you are using China Internet, it will have signal.
Click to expand...
Click to collapse
Or maybe I try to fix it.

Ricky Chrung said:
Or maybe I try to fix it.
Click to expand...
Click to collapse
Not only internet. What I meant to say is it has no network coverage. No signal at all. Can't do SMS and calls. Anyway, if that's what you meant to say on your QA, I apologize for not getting it.

xda_borj said:
Not only internet. What I meant to say is it has no network coverage. No signal at all. Can't do SMS and calls. Anyway, if that's what you meant to say on your QA, I apologize for not getting it.
Click to expand...
Click to collapse
Ok

[ROM][SE][8.0][TREBLE][SM-A530F/A730W/A730F]A7 2018 Port Rom V1.0

A7 2018 PORT ROM​
You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!​First you have to treble your device from here
If you appreciate the work i have done, Feel free to buy me a cup of coffee @Paypal ​
Some information you should know..
This is a full A7 2018 port with Treble android version 8.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
You are not allowed to use this base, if you want to make rom, "DIY"
Any sort of File Kanging will be reported without hesitation.
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested thoroughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
FEATURES
- Android 8.0
- Odex System
- Slightly debloated
- Zipaligned
- Optimized for battery and performance
- Full Samsung experience 9.0 without missing vital apps
- And all the goodies Oreo brings
- Based on A750FNPUU1ARK4
- Contains all features from A7 2018 minus hardware specific ones
- All the original features are present (Wifi,Bluetooth, basic camera etc)
Project Treble Rom Features :-
- Full Treble support
- Navigation bar gestures
- AR stickers
- AlwaysOn Display(Aod Touch, Variable brightness)
- BluelightFilter
- BixbyVision
- Samsung DolbyAtmos
- Optimised for A8/A8+
- Many prop and feature tweaks
- DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
- ODM Supported for middleEast , Europe And asian countries
- VoLTE Supported
- Uptodate APN Configration
- Exclusive samsung apps
- And many more additions
Quantum Custom Kernel v1 :-
- Basic Kernel to boot any Rom
- based on A750FNPUU1ARK4 ramdisk
- Full treble ramdisk
- Supports 8.0 and 8.1
- Samsung Security Disabled
- Disabled more knox and logging
- Init.D Support
- Other minor improvments
INSTALL STEPS
ensure you have LATEST TREBLE TWRP
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
VERY IMPORTANT
DONT FLASH MAGISK BEFORE FIRST BOOT !
Setup your rom and READ the F.A.Q for more information.
BUGS
Samsung camera video recorder (third party recorder apps work)
CREDITS
- @Griffin98 , @lzzy12 , @somadsul , @TaifAljaloo , @ananjaser1211 for all their support and contribution
Downloads. Changelogs , F.A.Qs below​
XDA:DevDB Information
A7 2018 Treble, ROM for the Samsung Galaxy A8 (2018)
Kernel Source Code: https://github.com/prashantpaddune/universal7885
Contributors
prashantp01
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2019-01-30
Created 2019-01-30
Last Updated 2019-01-30

DOWNLOAD
Come hang with us on our chat : Telegram
----------------------------------------------------------------
Treble Rom V1 based on A7 2018 port[LATEST]
Initial Release
Google Drive : Download
----------------------------------------------------------------
CHANGELOG
V1.0
-initial release

FAQ
Good idea to read this F.A.Q While the rom is installing
Q : This rom supports full treble?
A : Yes, this rom support full treble from A7 2018
Q : If I want to flash GSI, what i have to do?
A : If u planned to flash GSI, just flash this base, and then flash your GSI image from twrp
Q : Phone took alot of time to boot, and is very laggy
A : pay attention to install steps and Don't flash Magisk before first boot
Q : I dont see any EDGE panels after installing
A : Simple, I didn't added
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations
Q : What to do after the rom is setup ?
A : Go to samsung apps, let the phone update everthing

Good job sir

Just got it set up and... i am treble ready? No way!
There is definitely a positive change in response times and obviously much better use of hardware. Rooted no prob after a long first run and installed after 3 boots. Nice!

mindlery said:
Just got it set up and... i am treble ready? No way!
There is definitely a positive change in response times and obviously much better use of hardware. Rooted no prob after a long first run and installed after 3 boots. Nice!
Click to expand...
Click to collapse
now that you installed treble fully, you can install GSIs from the treble forums but there is one problem with pie GSIs, some GSIs dont work because of some kind of overlays.. here's a list of GSIs that work and dont work
Avoid these GSIs:
ViperOS (Pie)
Pixel Dust (Pie)
PixelExperience (Pie)
Resurrection Remix (Pie)
HavocOS (Pie)
Liquid Remix (Pie)
MIUI (Oreo)
Oxygen OS (Oreo)
XenonHD (Oreo)
GSIs that work:
Phh-Treble (Pie/Oreo)
AOSP Extended (Pie (6.0)/Oreo)
AOSiP (Pie)
Descendant (Pie)
Bootleggers (Oreo)
Resurrection Remix (Oreo)
Lineage OS (Pie)

Ok nice. Kinda all over the place here. This is crazy. Only because i'm going to try all the ones suggested

Oh. My. God. This is AMAZING! My A8 is gone!

mindlery said:
Oh. My. God. This is AMAZING! My A8 is gone!
Click to expand...
Click to collapse
what do you mean by "gone" ?

587.saboor said:
what do you mean by "gone"
Click to expand...
Click to collapse
Ha. So I've probably tried close to 10 gsi's now and while some were decent, there so far has always been something that makes it unreasonable to stick with.
There's a lot more choices, that's for sure. I was really hoping to nail the rr 9.0 but don't have the patience to fix the partition issue.... so now I am looking at a cool glowing arrow with hopes of no vendor error message at the welcome screen. The install was easy. No idea if this glowing arrow is going to get tired and let me have a spin at it....

Can I use it without root? I mean i don't want to have the phoe rooted for some apps. Thank You.

is it normal that my Device now shown as A730F ?
also i noticed a performance decrease

You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!
Click to expand...
Click to collapse
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.

Someone_Somewhere said:
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.
Click to expand...
Click to collapse
well kernel is OSS, they have rights to do whatever they want to do with sources, as sources are also linked in the thread. TW isn't OSS, if u Think samsung TW is open sources provide me sources links and i make my rom oss

Someone_Somewhere said:
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.
Click to expand...
Click to collapse
prashantp01 said:
well kernel is OSS, they have rights to do whatever they want to do with sources, as sources are also linked in the thread. TW isn't OSS, if u Think samsung TW is open sources provide me sources links and i make my rom oss
Click to expand...
Click to collapse
So if TW is closed sources i have rights to protect my works from kanging, and quote clearly says `You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!` which means u can use but first you have to take my permissions as it's not OSS. Hope you understand and do more research regarding this `

Joseluize said:
Can I use it without root? I mean i don't want to have the phoe rooted for some apps. Thank You.
Click to expand...
Click to collapse
yes, u can root/unroot rom it's upto users
Ztiffn said:
is it normal that my Device now shown as A730F ?
also i noticed a performance decrease
Click to expand...
Click to collapse
Device shown A730F is normal if u want u can change your model name u can change it from device info
also issues regarding performance , there is no such issues. Performance and battery is way better from our stock

prashantp01 said:
yes, u can root/unroot rom it's upto users
Device shown A730F is normal if u want u can change your model name u can change it from device info
also issues regarding performance , there is no such issues. Performance and battery is way better from our stock
Click to expand...
Click to collapse
thank you for the reply
i tried AOSP Phh-Treble today and got again the same feeling compared to this rom, this rom feels a bit "laggy". Don't get me wrong, it's not perma, it happens when i scroll realy quick...maybe it seems to me subjectively like that :cyclops:
atm i got two other issues:
the device didnt't get recognized if i connect it with usb to pc. only in recovery mode.
the developer options crash everytime if i try to open

Ztiffn said:
thank you for the reply
i tried AOSP Phh-Treble today and got again the same feeling compared to this rom, this rom feels a bit "laggy". Don't get me wrong, it's not perma, it happens when i scroll realy quick...maybe it seems to me subjectively like that :cyclops:
atm i got two other issues:
the device didnt't get recognized if i connect it with usb to pc. only in recovery mode.
the developer options crash everytime if i try to open
Click to expand...
Click to collapse
Well if u said aosp phh.... Then its not my rom... Report to phh...what i have made is just vendor for this device

treble roms
i have tried multiple treble roms but this is the only one that doesnt have problems and actually has the samsung apps. i was about to untreble my device until i found this rom. anyways wanted to say thanks and good job. i hope soon there will be a samsung pie rom.

stringman666 said:
i have tried multiple treble roms but this is the only one that doesnt have problems and actually has the samsung apps. i was about to untreble my device until i found this rom. anyways wanted to say thanks and good job. i hope soon there will be a samsung pie rom.
Click to expand...
Click to collapse
These roms are laggy only at the start give it 10 hours they calm down.

[Stable] Exnos Rom [7.1.1] Samsung J1 4G {exnos 3475]

WELCOME
This is eXnos ROM
The improved and feature rich stockish Samsung ROM but with better performance.
Maintained by @[email protected] (Bhanu)
Kernal for Rom by @cıyanogen
Base by @comrade79
NEWS
We means I (Bhanu the maintainer of this ROM)
is working and improving the ROM day and night
Everyday i learn a new thing and try to improve this ROM
well, development is not continued, may get continued but will see as of now thank-you all.
So, lets begin the features
Better than stock
Android 7
Camera is broken so privacy protection
Full System wide Theming support
Animated lock screen
Charging Animation
Call Recording
Stock Samsung Apps
Fluid fell
Gaming mode with kernel level support
and much more.........
Features of latest version
20% faster than major v3.0
Auto-rotate fixed
Better scaling
New kernel (by ciyanogen)
Better battery life
Improved Gaming Driver
Improved security
and much more............
Upcoming Features {in dev}
Wifi sharing using Hotspot
Gallery private folder {to hide photos}
System wide optimisations
.
.
You suggest below
Screenshots
Below in Attachment
Bugs
Auto-rotate
adb
Camera
Installations {imp}
Just download the zip
then
Contribute using Thanks below
then
{Flash it like any other ROM}
{Use TWRP 3.3.1 }
Thanks (Contribute)
I don"t know you can contribute using
Google play gift card or amazon gift card
as a "good work bro" .
You can use that message icon above
to send me code.
Downloads
Update v3.2a {latest version}
Click here to Download
contribute for future updates.... (to help fund the project)
Updates​
v1.0-------> initial dev build {15/11/2019}
v1.1-------> initial public build {6/14/2021}
v1.2-------> fixed themes issue {6/16/2021}
** v 1.4 {dev}
** v 1.8 {dev}
** v 2.5 {dev}
v3.0 ------> Major Version {5 Dec 2021}
v3.1 ------> beta (auto-rotate fix testing) {dev} { 22 dec 2021}
v3.1.a -------> dev beta { camserver working} {dev} {4 Jan, 2022}
v3.2a -------> Update { auto rotate fixed} {public} {Jan 6, 2022)
v3.2.1.d ----> improved vision on features (internal) (Jan 29,2022)​
Contributors
@cıyanogen, @lzzy12, @TBM 13,@bengris32, @imranpopz @comrade79
Source Code: https://github.com/ciyanogen/android_kernel_samsung_j1xlte
Version Information​Status: Stable​Development: Active and with zero donation till now {wow}​ROM OS Version: 7.1.2 Nougat​ROM Kernel: Linux 3.10.9​Based On: Fluid UI 2.1 {touch wiz exp 8.3}​
Special Thanks to
kernal by @cıyanogen
ROM Base by @comrade79 ​
Created 15 Nov 2019
Last Updated 29 Jan 2022

First boot will take 30 minutes,
yes
30 minutes go watch some Pokemon or some thing​

If you are a developer then please help me to fix the camera and flash. it will help all of us J1 2016 users to have a fast, better and new life for our phones.

Thanks, this port is cool, but how to enable Themes there?

egor835 said:
Thanks, this port is cool, but how to enable Themes there? View attachment 5339091
Click to expand...
Click to collapse
Thanks for trying this rom. to use galaxy themes you would need to change build.prop inside /system. actually i forget to update build.prop.

egor835 said:
Thanks, this port is cool, but how to enable Themes there? View attachment 5339091
Click to expand...
Click to collapse
Download aroma file manager from here
go to twrp>mount>system
after it install aroma file manage as you install any zip
it will open a file manager go to sdcard and copy this build.prop
and paste it inside system folder. overwrite if it ask for.
and after reboot themes will start working. i will update rom so that themes is enabled by default. thanks for that.

[email protected] said:
Download aroma file manager from here
go to twrp>mount>system
after it install aroma file manage as you install any zip
it will open a file manager go to sdcard and copy this build.prop
and paste it inside system folder. overwrite if it ask for.
and after reboot themes will start working. i will update rom so that themes is enabled by default. thanks for that.
Click to expand...
Click to collapse
Thanks so much!

egor835 said:
Thanks so much!
Click to expand...
Click to collapse
will it worked ? can you send some screenshot of home screen, statusbar, settings and app drawer. i am actually working on another project for a while. so i need some screenshots for the post. thanks.

can I use this custom rom on SM-J105B?

Nullumx said:
can I use this custom rom on SM-J105B?
Click to expand...
Click to collapse
thanks for your interest in the rom, but your device SM-J105B aka samsung galaxy J1 mini is a spectrum8830 based. but this rom is for exynos3475 samsung galaxy J1 4G.

Nice rom.
Fast, stayable, plz fix the camara. Other things seems ok. Sry for my bad English.

Sabbbir said:
Nice rom.
Fast, stayable, plz fix the camara. Other things seems ok. Sry for my bad English.
Click to expand...
Click to collapse
thanks for such motivational words, camera fix is in progress but i don't have enough support and donations to continue this project. we will see if this post get 100 likes then we will continue camera development.

Our device is almost dead. There is no stayable rom for this device. This rom is good. Hpe you will got 100 like. And continue the project. Thanks for your work mate.
edit: mtp is not working. while cannected to pc only charging. can't show intarnal or extarnal storage.

other than broken sensors and camera, this rom runs much smoother and better than stock rom haha, currently daily driving this rom on my J120G, i wish i can donate but sadly i can't hopefully someday we're able to get camera fixed keep it up !

Thank you very much for doing this.i think this phone has dead since no one want make custom rom for this phone.i can't fix the camera but someday i hope there is a modders can fix this bug. Sorry my english is bad

starponsel said:
Thank you very much for doing this.i think this phone has dead since no one want make custom rom for this phone.i can't fix the camera but someday i hope there is a modders can fix this bug. Sorry my english is bad
Click to expand...
Click to collapse
thanks for checking out this rom. i am intrested and will try to make more roms after all i love my galaxy j1 and there are many out there who also love j1 4g.

CM users said:
other than broken sensors and camera, this rom runs much smoother and better than stock rom haha, currently daily driving this rom on my J120G, i wish i can donate but sadly i can't hopefully someday we're able to get camera fixed keep it up !
Click to expand...
Click to collapse
sensors are fix for j120g model and about camera i tried a lot but there seems to be no way to fix it.
actually, there is a way and many developers have even fixed it but they are not telling me how to fix it.
I do all my work for your guys and donation helps me to improve my hardware and motivation.
thanks for all those likes and support. i really appreciate that.

use this for daily driver,and i can say this rom is very awesome and stable(battery life is good,and smooth),but my sensor is not working (my device is j120g).and do you have telegram group or something?
[email protected] said:
thanks for checking out this rom. i am intrested and will try to make more roms after all i love my galaxy j1 and there are many out there who also love j1 4g.
Click to expand...
Click to collapse

starponsel said:
use this for daily driver,and i can say this rom is very awesome and stable(battery life is good,and smooth),but my sensor is not working (my device is j120g).and do you have telegram group or something?
Click to expand...
Click to collapse
AWWWWWWWSOME.......... thanks for trying out the eXynos ROM.
sensors are working it is just bug in auto-rotate because of port issue i will fix it in latest build.
i don't have telegram group but you can pm me on xda.
i was thinking to make camera work but it require resources.
so, i was in the process of making android Oreo(8.1) for this phone.
if you like i have also ported dot OS 7.1.1 to this phone which is super smooth and light like this rom and is aosp. but i was waiting to get response in this build before releasing more.

[email protected] said:
AWWWWWWWSOME.......... thanks for trying out the eXynos ROM.
sensors are working it is just bug in auto-rotate because of port issue i will fix it in latest build.
i don't have telegram group but you can pm me on xda.
i was thinking to make camera work but it require resources.
so, i was in the process of making android Oreo(8.1) for this phone.
if you like i have also ported dot OS 7.1.1 to this phone which is super smooth and light like this rom and is aosp. but i was waiting to get response in this build before releasing more.
Click to expand...
Click to collapse
Wow,thank you,but for now i want to stay in exnos rom because i like the samsung experience ui ,when you release the new build i will try it,so keep it up !, i support you
Edit: i change my mind,can i try that dot os ?

[ROM][UNOFFICIAL][13][ I9305 ][ LineageOS 20.0 ][ALPHA]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version of LineageOS 20 for our Samsung Galaxy S3 (I9305).
This is a alpha build, also from the LineageOS side, there are typical functions still missing, so don't install it if you want a completely stable and completed ROM and don't report my already listet bugs!
Attention:
Sometimes it needs another reboot to find the sim card.
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB
RIL
OTA-Updates
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
Random reboots
NFC
SD-Card can't be formatted as internal storage, this will cause a bootloop
Spoiler: Links
TWRP
ROM direct link
I9305 ROM
ROM Mega
Spoiler: Changelog
26.01.2023
13.03.2023
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /vendor/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
I would recommend to use microG instead of BitGapps,
here you can find the installation instructions:
Spoiler: microG instructions
Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
Open Magisk and update the App (and do a reboot if it's asking)
Enable Zygisk in Magisk
Download and install microG installer in the Magisk manager, reboot
Download and install safetynet-fix in the Magisk manager, reboot
Check with a safetynet checker app and you should pass
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access all boeffla configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][13.x][I9305][ALPHA] LineageOS 20.0, ROM for the Samsung Galaxy S3 LTE
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 13.x T
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Version Information
Status: Alpha
Created 2022-11-08
Last Updated 2023-03-13

Does the tmobile s3 need a different rom? I'm upgrading all my old phones I just found. You happen to be working on all the phones I have.

kerryking1 said:
Does the tmobile s3 need a different rom? I'm upgrading all my old phones I just found. You happen to be working on all the phones I have.
Click to expand...
Click to collapse
I'm sorry to tell you that the T-Mobile S3 has a different chipset (Qualcomm Snapdragon S4 Plus MSM8960) so this is not compatible.
This device never reached a higher android version than 7, I would love to bring Android 13 to this device, but I don't own this model.

html6405 said:
I'm sorry to tell you that the T-Mobile S3 has a different chipset (Qualcomm Snapdragon S4 Plus MSM8960) so this is not compatible.
This device never reached a higher android version than 7, I would love to bring Android 13 to this device, but I don't own this model.
Click to expand...
Click to collapse
Are you in the US?

kerryking1 said:
Are you in the US?
Click to expand...
Click to collapse
No, I'm in Europe...

Would it be possible to port if I tested it?

kerryking1 said:
Would it be possible to port if I tested it?
Click to expand...
Click to collapse
Not really, this would slow down the process too much.

Hi there. I stumbled over this thread? Are compiled versions of the Rom available? Just for testing a nonrooted device? Cheers

rattesack3 said:
Hi there. I stumbled over this thread? Are compiled versions of the Rom available? Just for testing a nonrooted device? Cheers
Click to expand...
Click to collapse
1.03 GB folder on MEGA
2 files
mega.nz

Thanks will give it a try soon! Everytime i thought there were device at eol, they last longer. Hopefully this isn' t true for the gt-i9305.

Can you give some instructions to build the Rom on my own?

Do you think I could just swap boards? The boards look the same.

rattesack3 said:
Can you give some instructions to build the Rom on my own?
Click to expand...
Click to collapse
Write me a PN and I will help you.
kerryking1 said:
Do you think I could just swap boards? The boards look the same.
Click to expand...
Click to collapse
I fear that the mainboard could not fit into the case, but idk, you could give it a try.

I asked a seller on ebay and they said it doesn't work.

Is porting to a different chipset like starting over on port?

kerryking1 said:
Is porting to a different chipset like starting over on port?
Click to expand...
Click to collapse
I would have to start from the last developement state.
But at first I would make the device tree's for A13 ready, fix the build (there could be many problems), make the kernel ready and so on...
There would be a lot of work todo.

Hello,
the volume of voice recordings (e.g. whatsapp or signal) has always been too low for me in Lineage OS. In order for my interlocutors to understand me properly, I always had to increase the volume by changing the mixer_paths.xml in /root/vendor/etc/. Here is the video:
Unfortunately this file does not exist in Lineage OS 20. Does anyone know how to increase the volume of voice recordings here?

I'm so grateful you have brought my N8000 and i9305 back to life!
My children are learning and playing on my N8000 tablet. I have donated for N8000.
I re-wiped and installed your latest on i9305
20.0-20221108-HTML6405-i9305.zip
MicroG
Disabled animations
Android UI is running fast!
I tested YouTube app. It works but drops some frames on 360p, and any higher quality levels it drops a lot of frames.
scrcpy working nicely (not used with YouTube of course)
I'm still testing etc. It looks like i9305 will be useful with your ROM
-------------
Regarding your 3.4 kernel for "S3" (probably i9300?)
@html6405
Downloads for : Samsung Galaxy S3 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Please excuse my ignorance about kernels on Samsung Android.
Kernel Q1. Can your 3.4 "S3" Kernel work on S3 LTE i9305?
No Q2: Would you be able to compile 3.4 kernel for i9305?
Yes Q2. If I install html6405_kernel_-e48ea6b54b22-m0-3.4.zip Must I also install boot_img_3.4.img
Yes Q3. In what order do I install the kernel zip and boot_img zip?

Update 26.01.2023:
Synced with latest LineageOS sources
Set swappiness back to 100
Fixed SamsungDoze

Update 13.03.2023:
Synced with LineageOS sources from February
Moved to faster ota server
Possible fix for gralloc crash