Database Info

[ROM][PIE][9.0][J701X][v4]PRISH_OS.zip

TEAM PRISH WELCOMES YOU
PRISH OS Rom For Galaxy J701X
ONLY FOR NXT/NEO/CORE
SOME THINGS YOU SHOULD KNOW BEFORE GO FURTHER
[*]This is a full ONEUI port with android version PIE
[*]If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
[*]Read the instructions and the F.A.Q Before installing the rom or posting a reply.
[*][FOR DEVS] If you want to use this as a base for other exynos7870 Phones. Please ask first, and provide proper credits and links to the original thread.
[*]Any sort of File Kanging will be reported without hesitation.
there might be some bugs that me and testers could not have found yet. so please report them.
I have also included pretty much Tweaks for better performance ;P
As the nature of these ports go, it was a non stop battle for almost 1 weeks straight to get it to this point where all features are working as expected. if you appreacite this work Hit the Thanks button, and consider a donation
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
FEATURES
[*]Fully based on latest stable J701 PIE BASE
[*]JETBLACK APPS
[*]SYSTEM TWEAKED
[*]NOTE 10 WALLPAPERS
[*]HEAVY DEBLOATED
[*]ONEUI 1.5
[*]MODED MIXERS
[*]SEMI DEODEXED
[*]TWEAKED FOR PERFORMANCE
[*]HELIOS INSIDE
[*]ROOTABLE WITH MAGISK
[*]NEW SPLASH ADDED
[*]CUSTOM FONTS ADDED
[*]SUPPORTS GOOGELS FACE UNLOCK
[*]RMM/KnoxGuard/Defex Free
[*]AND MUCH MORE I DONT REMEMBER xD
KERNEL
[*]Helios Kernel
[*]- Fully featured Kernel
[*]- Overclocking and custom governors
[*]- Latest Drivers and R28 GPU Driver
[*]- Samsung Security Disabled
[*]- Disabled more knox and useless logging
[*]- FakeKnox
[*]- Bootstate Green for safteynet
[*]- Patched some props for safteynet
[*]- Reduced GMS Wakelocks
[*]- Init.D Support
[*]- And many more improvments
[*]and many more goodies
STEPS TO INSTALL
[*]ensure you have LATEST TWRP
[*]Download and copy the ROM to your device external SDcard (preferred)
[*]Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
[*]Flash the ROM.ZIP
[*]After the boot animation is on for 15~20 Seconds. Hold VolumeDown+power until the device reboots
[*]Setup your rom and READ the F.A.Q for more information.
[*]To Root, Flash the latest Magisk Canary Build after a successful Boot
BUGS
NONE YOU TELL ME ;P
SOME GLIPMSES
Imgur Album with ALL photos : IMGUR Album
CREDITS
ananjaser1211-- FOR THE POWERFUL HELIOS KERNEL, WITHOUT KERNEL THIS ROM IS NOTHING, PLUS ALLOWING ME TO USE SOME LINES FROM HIS POST ( SO I SAVED MY LOTS OF TIME BCZ OF U BRO THNX)
DAvinash97-
FOR KEEPING ME IN THE SENSE TO COMPLETE MY WORK AND HELPING ME WITH SOME FILES
jbsjoshua007-- FOR ALWAYS HELPING ME IN MY ALL PROJECTS AND WITH KERNELS AND FEATURES
AND REST TEAM PRISH
AND SOME WHO ARENT ON XDA THOUGH THEY HELPED ME WITH FILES AND TESTING
TESTERS
--DAVINASH97
--JBSJOSHUA007
--MANOJ
CHANGELOG
V4
-Based on LATEST NXT BASE
-REBASED FROM Scratch
-ADDED JETBLACK APPS (LATEST ONE)
-ADDED GAMETOOLS
-BLUE LIGHT FILTER
-NEW AND IMPROVED CAMERA MODS
-buildprop tweaks for performance
JOIN HERE AND SPAM WITH US : Telegram
AND IF ONLY WANNA SPAM ME : @neel0210
________________________________
PRISH_OS_V4
AFH : DOWNLAOD
SIZE : 1.3 GB
MD5 : 831a45647ba0eee2c10363b3f53fdf28
SUPPORT
Though TEAM PRISH never demands for donations but if you really like my work, you can do below mentioned things
SPAM WITH US IN TELEGRAM GROUP BECAUSE WE ALL ARE FONF OF SPAMMING xD : SPAM
APPRICIATE ME BY SENDING PMs ABOUT MY WORK ON TELEGRAM
LET US KNOW ABOUT OUR WORK OR ANY IMPROVEMENT OR FEATURE OR ANYTHING JUST TELL US AND FEEL FREE TO DISTURB
EVEN YOU CAN FORCE ME TO HAVE SOME FRAPPE VIA CLICKING ON THE --> STARBUCKS
SOMETHING TO KNOW​
THE IDEA BEHIND PRISH OS WAS BORN IN 2017 BUT THAT WOULD TAKE MY 2 YEARS TO EXECUTE, I ABANDONED THIS PROJECT, BUT MY TEAM SUPPORTED ME TO KEEP IT ALIVE,
THOUGH THROUGH THIS PLATFORM I MET MANY AWESOME PEOPLES AND MY TEAM IS ONE OF THEM.
IMPORTANT ANNOUNCEMENT
THE OWNER OR REASON behind Prish OS was born today some years ago, so first warm vibes to her, as i told you, you have your own OS though you dont have supported device xD. there are lots of things to tell live everytime like i am used to but nahh this time i am ok with whatever i got:good:
though i heartedly happy today not bcz its your day but bcz i find time and complete my dream which i had 2 years back in 2017 to upload your names OS on your birthday so here is the clip : VIDEO (click here to get redirect to the video) i did it as decided though doing this in this year is just as bull**** as you.
anyway I am glad that, I squeezed some time from my eccentric schedule to make and upload this Unfortunate OS which devastated me throughoutly anyway sometimes its better to be broken to be unbreakable. at least cz this trauma i got so much precious persons with who i can spam .
ANYWAY NOW GTFO.
"PRISH OS v5" would be EOL for PRISH OS, there are countless reasons for me to stop This project but, I would come back for sure with NEW PROJECT but its not going to be anytime soon, I need some time to cure my self and want to live my own life where i am stucked as hell so no developing for next few months. i wish i could make my mind up to develop again.anyway enjoy this rom
#stay_prishy
#she30
#****offnow
#kthnxbye!;
XDA:DevDB Information
PRISH OS , ROM for the Samsung Galaxy J7
Contributors
neel0210, ananjaser1211, DAVINASH97, jbsjoshua007
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: LATEST PIE BOOTLOADER
Version Information
Status: Stable
Current Stable Version: V4
Stable Release Date: 2019-11-30
Created 2019-11-29
Last Updated 2019-11-29

neel0210 said:
TEAM PRISH WELCOMES YOU
PRISH OS Rom For Galaxy J701X
ONLY FOR NXT/NEO/CORE
SOME THINGS YOU SHOULD KNOW BEFORE GO FURTHER
[*]This is a full ONEUI port with android version PIE
[*]If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
[*]Read the instructions and the F.A.Q Before installing the rom or posting a reply.
[*][FOR DEVS] If you want to use this as a base for other exynos7870 Phones. Please ask first, and provide proper credits and links to the original thread.
[*]Any sort of File Kanging will be reported without hesitation.
there might be some bugs that me and testers could not have found yet. so please report them.
I have also included pretty much Tweaks for better performance ;P
As the nature of these ports go, it was a non stop battle for almost 1 weeks straight to get it to this point where all features are working as expected. if you appreacite this work Hit the Thanks button, and consider a donation
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
FEATURES
[*]Fully based on latest stable J701 PIE BASE
[*]JETBLACK APPS
[*]SYSTEM TWEAKED
[*]NOTE 10 WALLPAPERS
[*]HEAVY DEBLOATED
[*]ONEUI 1.5
[*]MODED MIXERS
[*]SEMI DEODEXED
[*]TWEAKED FOR PERFORMANCE
[*]HELIOS INSIDE
[*]ROOTABLE WITH MAGISK
[*]NEW SPLASH ADDED
[*]CUSTOM FONTS ADDED
[*]SUPPORTS GOOGELS FACE UNLOCK
[*]RMM/KnoxGuard/Defex Free
[*]AND MUCH MORE I DONT REMEMBER xD
KERNEL
[*]Helios Kernel
[*]- Fully featured Kernel
[*]- Overclocking and custom governors
[*]- Latest Drivers and R28 GPU Driver
[*]- Samsung Security Disabled
[*]- Disabled more knox and useless logging
[*]- FakeKnox
[*]- Bootstate Green for safteynet
[*]- Patched some props for safteynet
[*]- Reduced GMS Wakelocks
[*]- Init.D Support
[*]- And many more improvments
[*]and many more goodies
STEPS TO INSTALL
[*]ensure you have LATEST TWRP
[*]Download and copy the ROM to your device external SDcard (preferred)
[*]Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
[*]Flash the ROM.ZIP
[*]After the boot animation is on for 15~20 Seconds. Hold VolumeDown+power until the device reboots
[*]Setup your rom and READ the F.A.Q for more information.
[*]To Root, Flash the latest Magisk Canary Build after a successful Boot
BUGS
NONE YOU TELL ME ;P
SOME GLIPMSES
Imgur Album with ALL photos : IMGUR Album
CREDITS
ananjaser1211-- FOR THE POWERFUL HELIOS KERNEL, WITHOUT KERNEL THIS ROM IS NOTHING, PLUS ALLOWING ME TO USE SOME LINES FROM HIS POST ( SO I SAVED MY LOTS OF TIME BCZ OF U BRO THNX)
DAvinash97-
FOR KEEPING ME IN THE SENSE TO COMPLETE MY WORK AND HELPING ME WITH SOME FILES
jbsjoshua007-- FOR ALWAYS HELPING ME IN MY ALL PROJECTS AND WITH KERNELS AND FEATURES
AND REST TEAM PRISH
AND SOME WHO ARENT ON XDA THOUGH THEY HELPED ME WITH FILES AND TESTING
TESTERS
--DAVINASH97
--JBSJOSHUA007
--MANOJ
CHANGELOG
V4
-Based on LATEST NXT BASE
-REBASED FROM Scratch
-ADDED JETBLACK APPS (LATEST ONE)
-ADDED GAMETOOLS
-BLUE LIGHT FILTER
-NEW AND IMPROVED CAMERA MODS
-buildprop tweaks for performance
JOIN HERE AND SPAM WITH US : Telegram
AND IF ONLY WANNA SPAM ME : @neel0210
________________________________
PRISH_OS_V4
AFH : DOWNLAOD
SIZE : 1.3 GB
MD5 : 831a45647ba0eee2c10363b3f53fdf28
SUPPORT
Though TEAM PRISH never demands for donations but if you really like my work, you can do below mentioned things
SPAM WITH US IN TELEGRAM GROUP BECAUSE WE ALL ARE FONF OF SPAMMING xD : SPAM
APPRICIATE ME BY SENDING PMs ABOUT MY WORK ON TELEGRAM
LET US KNOW ABOUT OUR WORK OR ANY IMPROVEMENT OR FEATURE OR ANYTHING JUST TELL US AND FEEL FREE TO DISTURB
EVEN YOU CAN FORCE ME TO HAVE SOME FRAPPE VIA CLICKING ON THE --> STARBUCKS
SOMETHING TO KNOW​
THE IDEA BEHIND PRISH OS WAS BORN IN 2017 BUT THAT WOULD TAKE MY 2 YEARS TO EXECUTE, I ABANDONED THIS PROJECT, BUT MY TEAM SUPPORTED ME TO KEEP IT ALIVE,
THOUGH THROUGH THIS PLATFORM I MET MANY AWESOME PEOPLES AND MY TEAM IS ONE OF THEM.
IMPORTANT ANNOUNCEMENT
THE OWNER OR REASON behind Prish OS was born today some years ago, so first warm vibes to her, as i told you, you have your own OS though you dont have supported device xD. there are lots of things to tell live everytime like i am used to but nahh this time i am ok with whatever i got:good:
though i heartedly happy today not bcz its your day but bcz i find time and complete my dream which i had 2 years back in 2017 to upload your names OS on your birthday so here is the clip : VIDEO (click here to get redirect to the video) i did it as decided though doing this in this year is just as bull**** as you.
anyway I am glad that, I squeezed some time from my eccentric schedule to make and upload this Unfortunate OS which devastated me throughoutly anyway sometimes its better to be broken to be unbreakable. at least cz this trauma i got so much precious persons with who i can spam .
ANYWAY NOW GTFO.
"PRISH OS v5" would be EOL for PRISH OS, there are countless reasons for me to stop This project but, I would come back for sure with NEW PROJECT but its not going to be anytime soon, I need some time to cure my self and want to live my own life where i am stucked as hell so no developing for next few months. i wish i could make my mind up to develop again.anyway enjoy this rom
#stay_prishy
#she30
#****offnow
#kthnxbye!;
XDA:DevDB Information
PRISH OS , ROM for the Samsung Galaxy J7
Contributors
neel0210, ananjaser1211, DAVINASH97, jbsjoshua007
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: LATEST PIE BOOTLOADER
Version Information
Status: Stable
Current Stable Version: V4
Stable Release Date: 2019-11-30
Created 2019-11-29
Last Updated 2019-11-29
Click to expand...
Click to collapse
VOLTE supported????

[ROM] [10] [Official] Android Open Source Mutation - hotdogb

Welcome to Android Open Source Mutation for the OnePlus 7T
(previously Xtended-Mutate)
Code:
**DISCLAIMER**
We bear absolutely no responsibility for any damages to your device,
from following any instructions or flashing anything we provide.
All software is 'as-is' and no warranty is implied or stated and will not be honored.
As always flash at your own risk.
Everything you could want in a ROM.... and more
ROM originally derived from MSM-Xtended
Features list:
- Android R notification headers
- Substratum support
- Theming (accents, gradients, dark mode)
- FOD icon customizer
- Fully customizable animations
- Different fonts included
- Full sounds customization
- Power menu customization
- Full MD2 support
- Signature spoofing
- Remove ADB notification
- Aggressive battery
- Sensor block per package
- OmniStyle and OmniJaws for headers and weather
- Ambient display and Always-On Display
And even more!
TODO:
- Rebase on Lineage sources
- Finish rebranding
- Add all the features, ALL OF THEM.
- Ok maybe not all.
What works:
- FOD works
- Alert slider works
- DC dimming works
- 60/90/Auto refresh rate
Bugs:
- Auto brightness may have issues
- The carrier Visible is known not working on latest builds.
- ??? This is where you tell us
Install instructions
* Always make sure to flash latest OxygenOS to each slot before installing this ROM!
* Flashing via fastbootd is recommended for now. Although a TWRP is available, it is closed source and therefore in violation of the TWRP GPLv3 license and we therefore cannot link to it here. OTA zips and fastbootd zips will be provided.
1. Set up adb and fastboot on your computer with the latest zip from google. Get them here
2. Ensure your device is upgraded to the latest OxygenOS. We recommend flashing latest to both slots before proceeding.
3. Reboot to bootloader
Code:
adb reboot bootloader
4. Ensure your bootloader is unlocked. This can be done with
Code:
fastboot oem unlock
You'll need to confirm on device. T-Mobile users have to obtain the unlock from T-Mobile first.
5. Now this is the different part with Android 10. If you choose to use the non-official TWRP, you may flash the OTA zip as usual. Otherwise assuming the ROM fastbootd zip is in the same location as your prompt:
Code:
fastboot update -w <file>.zip
6. Reboot and enjoy! Never flash magisk on first reboot as this can cause issues. Always boot at least once.
Updates
* Recommended method is via fastbootd
1. With adb set up and enabled:
Code:
adb reboot bootloader
2. In bootloader mode:
Code:
fastboot update <name>.zip
Reporting bugs:
- To report a bug, clean flash is MANDATORY.
- We provide no support to (Ed)Xposed users, or custom kernels (some custom kernels are known to break FOD, DC dimming, etc). Bugs should be reported with magisk in safe mode or with no modules enabled. We also provide no support for any users of AIO "tweakers" (eg, FDE.AI, LSpeed, NFS, etc), the reason being those are well known to cause instability.
- A good bug report should contain:
Code:
- Device:
- ROM version (eg date ROM was built):
- Magisk used?:
- Tried a clean flash?:
- Concise description (eg, no "fingerprint not working plzzz help"):
- Logcat or dmesg (for boot issues, try the Magisk Module LogCatcher, logcat's I recommend Logcat Reader. Reports without logs WILL BE IGNORED):
Support:
-Telegram: https://t.me/joinchat/KNY93ke5jYFhTFYpwyR3Lw
-XDA: this thread (duh)
Downloads:
{Mod edit}
Device sources:
Kernel: https://github.com/Xtended-Mutate/kernel_oneplus_sm8150
Device: https://github.com/Xtended-Mutate/device_oneplus_hotdogb
Many thanks to:
@linuxandria
jacks84
@Abalam
Creators of MSM-Xtended
AOSiP for some device related things
BlissROMs for a handful of features
Everyone else we probably forgot to mention
We request all discussion to be courteous, on topic, and adding to the discussion. Any hateful or off-topic will be promptly be delt with. Moderators, do what you have to. Thank you.
XDA:DevDB Information
[ROM] [10] [Official] Android Open Source Mutation - hotdogb, ROM for the OnePlus 7T
Contributors
linuxandria, Abalam, jacks84
Source Code: https://github.com/Xtended-Mutate
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS 10.0.9 or newer
Based On: MSM-Xtended
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2020-05-12
Created 2020-05-14
Last Updated 2020-05-17

Thanks for release !
Looks like a cool rom.
So,
fastboot update -w <file>.zip
Click to expand...
Click to collapse
Will be all thats needed to flash?
No need to unzip and flash each file manually , as we do with other ROMs for our OnePlus 7t?

hightech316 said:
Thanks for release !
Looks like a cool rom.
So,
Will be all thats needed to flash?
No need to unzip and flash each file manually , as we do with other ROMs for our OnePlus 7t?
Click to expand...
Click to collapse
No need to unzip no

linuxandria said:
No need to unzip no
Click to expand...
Click to collapse
Awesome.
Is it Ok coming from MSM-Xtended ,or should we flash back to lastest OxygenOS first, then flash your rom?

Thanks for a new room! This looks pretty dope

hightech316 said:
Awesome.
Is it Ok coming from MSM-Xtended ,or should we flash back to lastest OxygenOS first, then flash your rom?
Click to expand...
Click to collapse
I always recommend clean flashing, as we have some serious changes

Can some one upload some screenshot of this ROM, please?

First, THANK YOU VERY MUCH!!!
Next:
Does it have face unlock? I work at the post office and have to use gloves. Face unlock is a must have for me.
Also, does Google pay work?

Congratulations you guys for getting all together now on XDA. Jack: Lets get you back on XDA so you can get some XDA points

Been using this for a day now and just wanted to say this rom is amazing! The customization and the performance is perfect. Thanks again!

Kanging entire project without permission, isn't what we promote on xda
aer0zer0 said:
Congratulations you guys for getting all together now on XDA. Jack: Lets get you back on XDA so you can get some XDA points
Click to expand...
Click to collapse
And luckily, for doing that he decided to use MSM-Xtended with just logo changes and nothing further, no addition, no fixes, just nothing.
Going through the commit history was showing further more. I mean, I have heard many devs saying cherry-picking is the easiest, still people don't want to ?
Moderators, the entire of our work has been used without any notice or permission or anything. Here I mean entire of the work of Team Xtended and we object to it.
Kindly let us know the process to take down this thread.
Regards
BOND

SuperDroidBond said:
And luckily, for doing that he decided to use MSM-Xtended with just logo changes and nothing further, no addition, no fixes, just nothing.
Going through the commit history was showing further more. I mean, I have heard many devs saying cherry-picking is the easiest, still people don't want to ?
Moderators, the entire of our work has been used without any notice or permission or anything. Here I mean entire of the work of Team Xtended and we object to it.
Kindly let us know the process to take down this thread.
Regards
BOND
Click to expand...
Click to collapse
I sort of knew this was going to happen when I saw this thread but yea he basically just cloned y'all entire work without any changes hell I'm surprised it took this long tho for anyone to notice lol.

Unfortunately due to recent feedback and discussions, this thread will be locked until further notice! The project will be undergoing some serious reworking and reevaluation!
@MikeChannon if you could lock this thread we'd be grateful

SuperDroidBond said:
And luckily, for doing that he decided to use MSM-Xtended with just logo changes and nothing further, no addition, no fixes, just nothing.
Going through the commit history was showing further more. I mean, I have heard many devs saying cherry-picking is the easiest, still people don't want to ?
Moderators, the entire of our work has been used without any notice or permission or anything. Here I mean entire of the work of Team Xtended and we object to it.
Kindly let us know the process to take down this thread.
Regards
BOND
Click to expand...
Click to collapse
You have absolutely no right to say this. We have violated no license, and have given all proper authorship and credits. In addition, while it is most certainly true we have based our rom on MSM-Xtended (and have never once denied it!), we have added a smattering of new features and unbroken things they have broken on our supported devices.
Kindly do not make exaggerated accusations, and if you have something to say, let's discuss it in private, not taking to public forums to complain about someone using your work. Personally if someone based off my work, I'd be complimented
If you want to discuss anything in a constructive manner, my telegram username is linuxandria, otherwise do not further pollute our chatrooms and threads with any more of this nonsense, thanks.

And I'll kindly remind everyone that you have kanged the entire work of either AOSP or LOS and you don't see them coming into your xda threads complaining about using their works without violating any licenses and maintaining proper authorship.
Regards

In before the lock! Lol

linuxandria said:
And I'll kindly remind everyone that you have kanged the entire work of either AOSP or LOS and you don't see them coming into your xda threads complaining about using their works without violating any licenses and maintaining proper authorship.
Regards
Click to expand...
Click to collapse
And let's not forget gzosp, either. There was no MSM without GZOSP.

linuxandria said:
Unfortunately due to recent feedback and discussions, this thread will be locked until further notice! The project will be undergoing some serious reworking and reevaluation!
@MikeChannon if you could lock this thread we'd be grateful
Click to expand...
Click to collapse
THREAD CLOSED!
Please advise the moderators' team to re-open the thread when re-working and re-evaluation has been finished but especially when ready to provide a workable link to kernel source.
Request to everybody: If moderator's assistance is required, please do not simply state this in a post! XDA currently has more than 35.5M threads and we cannot and do not scan every single thread and post. For timely actions please use the report function!

[ROM][OneUI][J4 Core] LiteE J4+ PORT 1.0

Guess what, some noob dev ported OneUI 1.0 to J4 Core without even owning it.
LiteE J4+ PORT 1.0!​
Hello everyone, here's your goddamn OneUI 1.0 port on a device with 1GB of RAM.
Features:
OneUI 1.0
Heavily Debloated (a lot)
Deknoxed
And more...
Bugs:
Back Camera does not work (front works fine)
You tell me.
Download link: https://drive.google.com/file/d/1UUbOvE2YI2-e_bDsfQTcjrLZlVontiOd/view?usp=sharing
All necessary files:
Leo Kernel (by Leonel): http://drive.google.com/file/d/1Dki7FqTsJQU3nbq0613Hb8tP3Fgpn-hd/view?usp=sharing
ZRAM (by korom42): https://drive.google.com/file/d/1y53bPLIjEcG2yXqkEIVYdw9Xt8XGHM8p/view?usp=sharing
Disable Pie Security: https://androidfilehost.com/?fid=1395089523397964680
Magisk 20.4: https://github.com/topjohnwu/Magisk/releases
INSTRUCTIONS:
1. Make a backup just in case something goes wrong.
2. Wipe system, data, cache, dalvik, vendor.
3. Flash the ROM.
4. Flash the Kernel.
5. Reboot to recovery.
6. Flash Disable Pie Security.
7. Flash ZRAM Addon. (You can configure it using Kernel Adiutor)
8. Flash Magisk 20.4 then reboot and enjoy!
WHEN YOU ARE IN SETUP WIZARD, DO NOT PUT IN YOUR GOOGLE ACCOUNT, ONLY DO IT WHEN YOU FINISH THE SETUP.
If you really like this ROM, consider pushing thanks.
Credits:
Me, for almost doing everything, booting, adding optimizazions.
@pablobotty, for fixing almost all the bugs and adding a few other things.
@leohiper10, for his kernel.
@topjohnwu, for Magisk.
XDA:DevDB Information
LiteE J4+ PORT 1.0, ROM for the Samsung Galaxy J4+
Contributors
J6idot, pablobotty, leohiper10
Source Code: https://github.com/LeonelArtuzi/android_kernel_j4core
ROM OS Version: 9.x Pie
ROM Firmware Required: Latest Oreo FW
Version Information
Status: Testing
Created 2020-06-16
Last Updated 2020-06-16

Reserved

Reserved
Note:​Please do not come at me saying that you want some features added. I had to remove basically everything and no space is left (almost) in the system partition (due to that 1.4GB partition).

kapmino269 said:
Good Job bot .
Click to expand...
Click to collapse
yes

nice job ?
J6idot said:
Guess what, some noob dev ported OneUI 1.0 to J4 Core without even owning it.
LiteE J4+ PORT 1.0!​
Hello everyone, here's your goddamn OneUI 1.0 port on a device with 1GB of RAM.
Features:
OneUI 1.0
Heavily Debloated (a lot)
Deknoxed
And more...
Bugs:
Back Camera does not work (front works fine)
You tell me.
Download link: https://drive.google.com/file/d/1UUbOvE2YI2-e_bDsfQTcjrLZlVontiOd/view?usp=sharing
All necessary files:
Leo Kernel (by Leonel): http://drive.google.com/file/d/1Dki7FqTsJQU3nbq0613Hb8tP3Fgpn-hd/view?usp=sharing
ZRAM (by korom42): https://drive.google.com/file/d/1y53bPLIjEcG2yXqkEIVYdw9Xt8XGHM8p/view?usp=sharing
Disable Pie Security: https://androidfilehost.com/?fid=1395089523397964680
Magisk 20.4: https://github.com/topjohnwu/Magisk/releases
INSTRUCTIONS:
1. Make a backup just in case something goes wrong.
2. Wipe system, data, cache, dalvik, vendor.
3. Flash the ROM.
4. Flash the Kernel.
5. Reboot to recovery.
6. Flash Disable Pie Security.
7. Flash ZRAM Addon. (You can configure it using Kernel Adiutor)
8. Flash Magisk 20.4 then reboot and enjoy!
WHEN YOU ARE IN SETUP WIZARD, DO NOT PUT IN YOUR GOOGLE ACCOUNT, ONLY DO IT WHEN YOU FINISH THE SETUP.
If you really like this ROM, consider pushing thanks.
Credits:
Me, for almost doing everything, booting, adding optimizazions.
@pablobotty, for fixing almost all the bugs and adding a few other things.
@leohiper10, for his kernel.
@topjohnwu, for Magisk.
XDA:DevDB Information
LiteE J4+ PORT 1.0, ROM for the Samsung Galaxy J4+
Contributors
J6idot, pablobotty, leohiper10
Source Code: https://github.com/LeonelArtuzi/android_kernel_j4core
ROM OS Version: 9.x Pie
ROM Firmware Required: Latest Oreo FW
Version Information
Status: Testing
Created 2020-06-16
Last Updated 2020-06-16
Click to expand...
Click to collapse
I know it is in testing and some optimization details are missing to correct, but something essential would be the camera. But on the other hand, an excellent job.

soomin said:
I know it is in testing and some optimization details are missing to correct, but something essential would be the camera. But on the other hand, an excellent job.
Click to expand...
Click to collapse
Thanks for testing the ROM, but i have to say that back camera can actually work, it's just the camera app that closes. Could you download Footej and tell me if it works?

First, thank all the developers for the effort you make with these roms so that we can enjoy our j4 ... I wanted to know how I can solve the camera and flashlight failures or if you are going to get any update of this ROM with the corrected errors, thanks again for all. Also m gives error when installing kernel.

english mate

First, thank all the developers for the effort you make with these roms so that we can enjoy our j4 ... I wanted to know how I can solve the camera and flashlight failures or if you are going to get any update of this ROM with the corrected errors, thanks again for all. Also m gives error when installing kernel

Toni33 said:
First, thank all the developers for the effort you make with these roms so that we can enjoy our j4 ... I wanted to know how I can solve the camera and flashlight failures or if you are going to get any update of this ROM with the corrected errors, thanks again for all. Also m gives error when installing kernel
Click to expand...
Click to collapse
For camera, it might be an issue. Try with another camera app and tell me if it works.
The kernel issue, some people didn't get that. Did you follow the instructions?

I tried another camera application and it doesn't work .... on whether I followed the instructions well ... I did it as you describe and it keeps giving me an error ....

Really great job sir!!! Thank you very much for this!!

Tried it and it was laggy, frozes frequently even maxing out the online cores. Especially when unlocking it, it takes 3-5 sec before it responds. Can't be use as daily driver. I hope someone would port a custom rom like aex or lineage

Star Dust said:
Tried it and it was laggy, frozes frequently even maxing out the online cores. Especially when unlocking it, it takes 3-5 sec before it responds. Can't be use as daily driver. I hope someone would port a custom rom like aex or lineage
Click to expand...
Click to collapse
OneUI 1.0 on 1 GB of RAM dude :laugh:
Don't expect something crazy with performance.
Maybe 1.1 i can optimize it more.

Thanks man, it´s works.
Thanks man, it´s works.

J6idot said:
OneUI 1.0 on 1 GB of RAM dude :laugh:
Don't expect something crazy with performance.
Maybe 1.1 i can optimize it more.
Click to expand...
Click to collapse
I'm not expecting a great deal bout performance, I just thought it would be use as daily driver. Until maybe someone would develop a custom rom for j4core. Anyway I got the leokernel work with pie gsi, but can't be use as daily driver also because of bug of incall sound and mtp connection.

Star Dust said:
I'm not expecting a great deal bout performance, I just thought it would be use as daily driver. Until maybe someone would develop a custom rom for j4core. Anyway I got the leokernel work with pie gsi, but can't be use as daily driver also because of bug of incall sound and mtp connection.
Click to expand...
Click to collapse
i mean, why don't you try to port something from J4+?
Something like lineage, havoc.

could help me with the installation, I don't know how to do it?

yes

hello. please i installed the one ui port but my device lags. please qny solution

[ROM][ONEUI 2.5][10.0][A530F/A530W/A730F]FusionX V1.0

I'm not responsible for whatever damage this could possibly cause to your device.
If you appreciate the work i have done, and want me to continue working on this projet, Feel free to buy me a cup of coffee @paypal
Introducing FusionX - S9 Port For Galaxy A8/A8+ 2018 ONLY FOR A530F/A530W/A730F​
Some information you should know..
This is a full Samsung Galaxy S9 port with Android Version 10 | OneUI 2.5
This ROM is made with heavy collaboration from @corsicanu and @ananjaser1211 make sure to give them coffee.
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
Any sort of File Kanging will be reported without hesitation.
Release Note :-
As the nature of "Initial releases" tend to be, expect Bugs, i wrote down the ones i can see and that are actual issues that can affect people. so make sure to read them.
The F.A.Q and Notes page is more important than this entire post. it details stuff that you might need to do in order to avoid issues and not to look stupid reporting issues that otherwise wont happen.
Finally, This rom is only possible due to a TON of contributions from my friends @corsicanu and @ananjaser1211 without them you probably wouldn't have seen this ROM.
I have also included the majority of improvements , Aroma and edits from @corsicanu which im sure you guys are familiar with already.
HWC fix on this device was only possible by @ananjaser1211, without him I couldn't have been proceed with the camera fix.
Alright enough chit-chat. Enjoy the ROM. and do let me know in the thread how it is going on your end.
FEATURES
- Android 10.0
- G960FXXUCFTJ2 October release
- Odex System
- Zipaligned
- Full Samsung OneUI 2.5 Experience
- And all the goodies Android Q / Oneui 2.5 Brings
- Slightly debloated
- Magisk Supported
- RMM PrePatched
- Optimized for battery and performance
- Quantum Quack Kernel v1.0
- Contains all features from Galaxy S9 minus hardware specific ones (facelock/iris)
- All the original features are present (Wifi,Bluetooth, basic camera etc)
FusionX Port Features :-
- Always On Display(Aod Touch, Variable brightness)
- Samsung S9 DolbyAtmos
- Goodlock Support
- Bluelight Filter
- Many prop and feature tweaks and exclusive apps
- S9 Infinity Wallpapers
- Selectable Edge Panels and edgelighting+
- DE-Knoxed and disabled Additional samsung root prevention and security spams
- Full OMC setup with Many samsung supported countries
- Heavly optimised for A8/A8+
- Debloated via Aroma (Email, Calculator, Recorder, etc)
- Samsung NFC
- Samsung Avatar
- Bixby Vision + Home
- Samsung Screen Video recorder
- Samsung Smart View
- Digital Wellbeing
- Native AppLock
- Enabled some csc features (call record, status bar network speed etc.)
- Dual Messenger
- Patched for Single/Dual SIM + SDCard
- Google LiveCaptions
- And many more additions
Quantum Quack Kernel :-
- Full Android Q Support
- Compiled with GCC 4.9 toolchain
- Optimized for battery and performance
- Tons of under the hood improvements
- Upstreamed Linux 4.4.177
- WireGuard Support
- OC Little to 1.7Ghz
- UC big/Little to 200/500MHz
- DriveDriod Support
- Multi CPU Governors
- Multi I/O Schedulers
- Multi TCP Algorithms
- Wakelock Blocker v1.1
- Fsync Toggle on/off
- CRC Check Toggle on/off
- Disabled samsung security functions
- SeLinux Permissive
- State Notifier
- And many more additions
INSTALL STEPS
Note: Treble implementation is not required for this project
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK,VENDOR)
Flash the ROM.ZIP
Setup your rom and READ the F.A.Q for more information.
BUGS
- Bluetooth calls
- Torchlight Intensity Control
CREDITS
- @corsicanu and @ananjaser1211 For a ton of support with this Project.
- @TaifAljaloo and @somadsul for always supporting and being nice.
- @Astrako for Auto rotate and Hotspot Fix.
- @soulr344 for Brightness fix and all support.
- @Voytec83 and @yash92duster for all support with improvements on this project.
- @HovoAv and @arminhere for testing and being Awesome.
- Special thanks to my EliteTeam and TeamExyKings for always being supporting .
- If you helped in this rom and i forgot you, Send a PM or contact on Telegram.
Downloads. Changelogs , F.A.Qs below​
XDA:DevDB Information
FusionX V1.0, ROM for the Samsung Galaxy A8+ (2018)
Contributors
prashantp01, ananjaser1211, corsicanu
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Pie
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2020-11-20
Last Updated 2020-11-20

DOWNLOAD
Come hang with us on our chat : Telegram
----------------------------------------------------------------
FusionX V1.0 based on Galaxy S9 port
Google Drive : Download
----------------------------------------------------------------
CHANGELOG
V1.0
-initial release

FAQ
Good idea to read this F.A.Q While the rom is installing
Q : Do I need to Treble my Device before installing this rom ?
A : No need to Treble your Device, if you already have the treble implementation, make sure you wipe the Vendor partiton.
Q : I have Symlinks error / Rom wont go past splash
A : As the AROMA Told you, don't pick all the bloat. and use default settings if you don't know otherwise
Q : My phone does NOT boot help pls
A : Ensure you have LATEST bootloader and modem installed, did all the wipes, and did your house chores. Make sure your device is supported from the given thread. If you had Treble, Wipe your Vendor partition.
Q : Device is running too hot
A : If it was just set-up, Give it time and make sure everything is up-to-date.
Q : My device is having Resolution issues/gliches
A : Go to Settings > Display > Screen resolution, and switch between them to get correct FHD+ resolution.
Q : Does NFC got fixed ?
A : Yes, NFC works !
Q : How to pass Magisk Safety Net ?
A : Enabled Magisk Hide from Magisk setting and it should PASS SafetyNet

Note: Do not report any bugs or issues without any detailed explaination and ADB logs. Make Sure you also read F.A.Q before asking anything. There are tons of videos or threads on xda regarding how to take logs. If you still want to act nerd than don't expect me to help you with the issues

reserved

Noice!

Gg nub

does this rom performance is similar to Qdroid's performance?

good night!
I can't download ...
I logged in to the ggogle drive account and I'm downloading ... thanks

I have been using FusionX for a while now.
No new bugs apart from what OP stated. I caught one Random Reboot but other than that it's working pretty good. SafetyNet works after using Magisk Hide Props Config. Thanks for your hardwork!

Hello from Russia! I want to say a big thank you for the ROM, I really like it. Tell me, is the Samsung DEX feature implemented in this firmware? Or at least projecting a screen to a monitor using a usb-c to HDMI cable?

DonBaton said:
Hello from Russia! I want to say a big thank you for the ROM, I really like it. Tell me, is the Samsung DEX feature implemented in this firmware? Or at least projecting a screen to a monitor using a usb-c to HDMI cable?
Click to expand...
Click to collapse
Not yet...

kindly fix bluetoth calls.

Hello guys, a little question, first of all a thousand apologies for any inconvenience it may cause and for my terrible English, I am Hispanic.
Well, given the warmths, I would like to ask the developer how I could get the Samsung voice assistant, (the screen reader), since, I am a blind user (My girlfriend, who sees correctly, will help me by reading the TWRP and the I will control it like a Robot haha, telling it click here, click here, slide that and so on, since, I know how to do things when installing a ROM), although I haven't done it for years, since my old S7 EDGE 3 years ago years. Well, that, checking the ROM, I see that it was removed, or so I think, if not, it would be good for the developer to correct me. That, I want to get the Voice Assistant that comes by default in the Samsung Firmware to use it from the beginning and not be asking my girlfriend to do something that I can do myself, also I want to put my accounts from the beginning, if it would not be a lot ask, please. Also, if there was any way I could download the Samsung TTS voice files for myself to include in the ROM, I saw the one for Spanish Spain, but it's really horrible. And if it is not too much to ask or if it is a lot of annoyance, where could I get the S20 "Media" folder for this S9 port. One last thing. I want to change the model number in the ROM, from my device "jackpot2lte" SM-A730F to SM-G960F, which is the Firmware Port of the ROM from the Build.prop line, in "ro.product.system.model = SM-A730F "My question is, can I do it, or if this has been tested before or will it cause any issues. I ask it because I used to do that a long time ago when I flashed, but since now many things have changed, before I do something stupid, I better ask it, although I do not think something happens, but still, I do not lose anything. Thank you very much to whoever responds to me, and again, my apologies for the case.

hello sir i have installed this rom but unfortunately when i restart the phone after installing the package it opens twrp .everytime i dont know what to do now pls help

Hi, I love the work that you did, but there's a lot of issues.
One of them, is when I install the ROM, appear two messages, one of them says that there's an issue with something with XML (I don't know what is) and the other problem appears when I install Magisk 20.1, It says that there's a issue with internal android system.
Finally, inside in Magisk, the SafetyNet doesn't work for me, all have this: ✖
Sorry for my English, I don't speak well, I hope you can undertand which were my issues.
Pd: If anyone know how can I solve this, please reply me. Thx.

Hello! I have a problem with calls. First call after phone restart goes good, but the second and all others are problematic. I can not hear anything, that others are saying. Someone have this problem and know how to fix it?

everything is great except bluetooth. i have a gear s3 and i can't connect it to my phone .......
is this going to be repair???

Добрый день. можно поподробнее про инсталлятор "АРОМА"? Хотелось бы узнать, что может быть вызвано неправильной установкой системы при ее включении. Благодарю.
Translation: Good day. Can you tell us more about the AROMA installer? I would like to know what can be caused by an incorrect installation of the system when it is turned on. Thank you.

Hello, I have been testing since yesterday I like this rom very much, I was pleasantly surprised when WiFi calling in my country started working .I have encountered a problem with recording calls. Recorded conversations before doing the update. I tried the system settings of the phone application but the folders "call" empty. The external call recorder application by skvalex does not record now , the application detected the phone as s9, I tried on them and on the exynos 7880.
sorry for my english translator.

Do i need to install G-apps?

[ROM][11] JAGUAR R FOR ONEPLUS 3

This is the official build of Jaguar Rom. I have been building Android roms since 2012 for various devices including multiple Sonys, Lenovo Zuk and Oneplus 5 (my current device). You can check the Oneplus 5 development thread here: Oneplus 5 thread
Jaguar rom is focused on hardening of Android and kernel. As such, the rom has hardened bionic and tightened security. Kernel has security features ported from linux kernel 4.14.
Otherwise, the rom has all standard+ features that come with custom roms:
1 Rom control with custom Power menu, Statusbar, Buttons, Navbar, Quicksettings, Lockscreen, Notifications, Gestures, Themes etc.
2. Working FDE encryption, which is not forced, but could be enabled within Settings
3. Heavily modified Art, Bionic System/Vold and System/Security
4. Telephony response ('silently acknowledged') to Type Zero sms disabled
5. Toggle to disable Captive Portal logging
6. Rom could be booted on locked bootloader out of the box
7. All customizations as listed in '1'
8. MicroG ready
Instructions:
1. If you are encrypted on any other rom, you need to do a factory reset in TWRP, the option, where you enter 'Yes' to confirm.
2. Reboot into TWRP (after factory reset), transfer Jaguar to internal SD, wipe system/cache/data and /vendor, if you have it;
3. Flash the rom and reboot.
You will be unencrypted. If you want encryption (FDE, not ICE), encrypt withing Settings.
Rom V1 is in the attachment. All subsequent release will be posted in #3.
XDAevDB Information
JAGUAR R, ROM for the OnePlus 3
Contributors
optimumpro
Kernel Source Code: Kernel
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked Bootloader, if Magisk is Required
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2021-01-04
Created 2021-01-04
Credit: AOSP, Lineage, DU, MSM-Xtended, Crdroid

Reserved

January 8: New release, V2.0
1. January security patches
2. Rom rebuilt with speed flag. As a result, it is larger in size, but should be speedier, because there is less runtime compiling involved

Will try it out & report. Many Thanks for keeping our OP3/3T alive. Appreciate all the great developers work on XDA.
Update - Added a few screenshots. Everything is working so far. Snappy & Tons of Customization options. Rooted(Magisk Canary).
Update - Hotspot is not working for me. Typically I do not use this feature so I don't test this function.

kash_si said:
Will try it out & report. Many Thanks for keeping our OP3/3T alive. Appreciate all the great developers work on XDA.
Update - Added a few screenshots. Everything is working so far. Snappy & Tons of Customization options. Rooted(Magisk Canary).
Click to expand...
Click to collapse
How about hotspot? work on both 2.4ghz & 5ghz?

does it work for oneplus 3t too or only oneplus 3.thanks

agustinustjahyo79 said:
does it work for oneplus 3t too or only oneplus 3.thanks
Click to expand...
Click to collapse
Every roms on this sub forum works on both.

I'll give this one a try, see how it is. Will report back later, thanks for the rom

faiz5200 said:
How about hotspot? work on both 2.4ghz & 5ghz?
Click to expand...
Click to collapse
Hotspot is not working for me. Typically I do not use this feature so I don't test this function.
Updated my initial response.

kash_si said:
Will try it out & report. Many Thanks for keeping our OP3/3T alive. Appreciate all the great developers work on XDA.
Update - Added a few screenshots. Everything is working so far. Snappy & Tons of Customization options. Rooted(Magisk Canary).
Update - Hotspot is not working for me. Typically I do not use this feature so I don't test this function.
Click to expand...
Click to collapse
How's the battery life so far? Problems with wakelock?

lapirado said:
How's the battery life so far? Problems with wakelock?
Click to expand...
Click to collapse
I am waiting for @optimumpro to release update with Jan-2021 ASP's. Then I plan to use it as my daily driver.
Currently I have it on my OP3 as a testbed, so can't really provide feedback on battery life. For my OP3/3T over the years average daily SOT has been around 2:30 to 3:30 hours upto & including Android 11.

kash_si said:
I am waiting for @optimumpro to release update with Jan-2021 ASP's. Then I plan to use it as my daily driver.
Currently I have it on my OP3 as a testbed, so can't really provide feedback on battery life. For my OP3/3T over the years average daily SOT has been around 2:30 to 3:30 hours upto & including Android 11.
Click to expand...
Click to collapse
Thanks for the reply.
But that sot seems quite short. Depending on the use you gave, ofc.
But with moderate use, I usually get around 4h.

@optimumpro
So your ROM seems to be build from MSM Xtended sources. There are improvements or advantages in your ROM over the original Xtended ROM?

jaydee 77 said:
@optimumpro
So your ROM seems to be build from MSM Xtended sources. There are improvements or advantages in your ROM over the original Xtended ROM?
Click to expand...
Click to collapse
I used AOSP sources, as well as Msm-Xtended, as well as DU, as well as Crdroid, but:
1. Art, Bionic, System/Vold, System/Security and most of /frameworks/base sources are different
2. Interface is different
3. Some blot removed
4. Several different apps
5. Kernel is different: I squashed about 20 commits (hardening) in one
6. Blobs are different
7. My rom can disable (with a toggle) Captive portal apk, which is spyware. Otherwise, if you uninstall it, you'll have a nasty 'X' in wifi and some sites may not work
8. Acknowledgement of receipt of type zero SMS is disabled. This is is the first thing hackers do - ping your phone with an sms that doesn't appear on screen... .
But ultimately, only you can decide which rom to use.

@optimumpro
My post was not to offend you. Thanks for the explanation and clarification. Your points make sense and they are great and important plus over the other ROMs. This should me mentioned in the OP.
I know that asking for ETA is not welcome on XDA. But one more question concerning updates. What are your plans for that. Your ROM has security in focus. Do you think building monthly updates for Android Security Bulletin?
I don't switch ROMs very often, cos I'm to lazy for this. So when switching to a new ROM I'll like to stick on it for a long time.

jaydee 77 said:
@optimumpro
My post was not to offend you. Thanks for the explanation and clarification. Your points make sense and they are a plus over the other ROMs. This should me mentioned in the OP.
I know that asking for ETA is not welcome on XDA. But one more question concerning updates. What are your plans for that. Your ROM has security in focus. Do you think building monthly updates for Android Security Bulletin?
I don't switch ROMs very often, cos I'm to lazy for this. So when switching to a new ROM I'll like to stick on it for a long time.
Click to expand...
Click to collapse
Usually, once a month. However, this rom is version 1, so, there might be more updates. Definitely, one with January security patches in a few days.

January 8: New release, V2.0
1. January security patches
2. Rom rebuilt with speed flag. As a result, it is larger in size, but should be speedier, because there is less runtime compiling involved
Dirty flash is fine on top of V-1. Download in post #3.

optimumpro said:
January 8: New release, V2.0
1. January security patches
2. Rom rebuilt with speed flag. As a result, it is larger in size, but should be speedier, because there is less runtime compiling involved
Dirty flash is fine on top of V-1. Download in post #3.
Click to expand...
Click to collapse
hotspot fixed in this build?

BrahmaGandhi said:
hotspot fixed in this build?
Click to expand...
Click to collapse
No. - I am using the latest version of TWRP - twrp-3.5.0_9-0-oneplus3

Great to see this hardened flavour of 11 which can even be used with locked bootloader @optimumpro !
As I understand you will have monthly updates also which is great to keep our phone up to date.
One question though; is it possible to use /data/local/userinit.sh scripts with this rom?
Would be a great option to do some system settings without the need of Magisk or other stuff.