Related
Here is Unofficial ArrowOS 9.x:good:
Download ROM
Changelog is too big for xda, so it's included in download folder.
If you are using Global /China Stable or third party rom (Xiaomi.eu), please download China Developer from here (search for "小米MIX3最新 开发版 线刷Fastboot完整包点击下载") and flash it, then flash PE system.img.
It seems current stable rom has some bugs in vendor or firmware (e.g. Google Camera is laggy).
Working:
Camera (including 4K video)
Wi-Fi
Bluetooth (audio, in-call audio)
GPS
NFC
Dual SIM, Dual 4G standby
VoLTE
Fingerprint
USB PD
Wireless Charge
Sensors including proximity
AOD
Not working:
Slider (actually it's working, but no app to handle)
OK Google detection in any screen
Bluetooth call for some users/devices
Android Auto (display flickering)
Mobile data on some carrier
Google Pay should work if you use MagiskHide, but I can't test since my country (Japan) uses hardware level security (exclusive for Japanese models) for payment via Google Pay.
Installation:
1. Flash the latest *Official* China Developer ROM (xiaomi.eu rom is not supported)
(If you are using other roms before, please wipe data)
2. Download and flash ZIP in TWRP
3. Flash Magisk v17.3
4. Reboot and profit!
FAQ:
Q. Google Assistant doesn't open when I push AI key
A. Please set Google Assistant as assistant app in settings -> Apps & Notifications
Q. Phone app is not working
A. Please set Phone as phone app in settings -> Apps & Notifications
Credit:
ArrowOS team and other developers
Source:
https://github.com/arrowos
https://github.com/AndroPlus-org/device_xiaomi_sdm845-common
https://github.com/AndroPlus-org/device_xiaomi_perseus
https://github.com/AndroPlus-org/vendor_xiaomi
https://github.com/AndroPlus-org/android_kernel_xiaomi_sdm845
Wow thank you for another custom rom sir. I am still happy with the pixel experience but will try this after.
AndroPlus said:
Here is Unofficial ArrowOS 9.x:good:
Download ROM
Download Kernel
Changelog is too big for xda, so it's included in download folder.
If you are using Global /China Stable or third party rom (Xiaomi.eu), please download China Developer from here (search for "小米MIX3最新 开发版 线刷Fastboot完整包点击下载") and flash it, then flash PE system.img.
It seems current stable rom has some bugs in vendor or firmware (e.g. Google Camera is laggy).
Working:
Camera (including 4K video)
Wi-Fi
Bluetooth (audio, in-call audio)
GPS
NFC
Dual SIM, Dual 4G standby
VoLTE
Fingerprint
USB PD
Wireless Charge
Sensors including proximity
AOD
Not working:
Slider (actually it's working, but no app to handle)
OK Google detection in any screen
Bluetooth call for some users/devices
Android Auto (display flickering)
Google Pay should work if you use MagiskHide, but I can't test since my country (Japan) uses hardware level security (exclusive for Japanese models) for payment via Google Pay.
Installation:
Currently generating ZIP is broken, so you have to install images one by one.
1. Flash the latest *Official* China Developer ROM (xiaomi.eu rom is not supported)
(If you are using other roms before, please wipe data)
2. Download and flash system.img
3. Flash my AndroPlus Kernel in TWRP
4. Flash Magisk
FAQ:
Q. Google Assistant doesn't open when I push AI key
A. Please set Google Assistant as assistant app in settings -> Apps & Notifications
Q. Phone app is not working
A. Please set Phone as phone app in settings -> Apps & Notifications
Credit:
ArrowOS team and other developers
Source:
https://github.com/arrowos
https://github.com/AndroPlus-org/device_xiaomi_sdm845-common
https://github.com/AndroPlus-org/device_xiaomi_perseus
https://github.com/AndroPlus-org/vendor_xiaomi
https://github.com/AndroPlus-org/android_kernel_xiaomi_sdm845
Click to expand...
Click to collapse
I'm using the build from yesterday, scared to flash new build as it's working great. Will New build be just as good?
james1089 said:
I'm using the build from yesterday, scared to flash new build as it's working great. Will New build be just as good?
Click to expand...
Click to collapse
It's just as good if not better no problems
I like the quickstep launcher more because of the swipe down for the notifications gesture etc. Pixel launcher doesn't provide that right?
Arrow ROM is really great and smooth!
If i came from pixel experience i just factory reset it then flash or need to flash again the chinese developer rom for a stable gcam?
Anubis111 said:
If i came from pixel experience i just factory reset it then flash or need to flash again the chinese developer rom for a stable gcam?
Click to expand...
Click to collapse
Just wipe system and flash, then kernel and magisk
Thank you so much for this rom. All your work is top notch!
Do I flash the china dev rom and system.img in TWRP?
Donation sent! Let's support this amazing Dev!
Aleksanderbjorn said:
Do I flash the china dev rom and system.img in TWRP?
Click to expand...
Click to collapse
Where you coming from (ROM)
Donated thanks
I fixed ZIP installation and added 190113_04 build.
Now you don't need to download separate zip for kernel, but you have to flash Magisk v17.3 zip after rom zip.
james1089 said:
Where you coming from (ROM)
Donated thanks
Click to expand...
Click to collapse
China stable 10.2.1.0
Won't flashing china Dev ROM through MIflash relock bootloader, or am I completely wrong?
I flashed 1113(04)zip over 1112, then bootloop to rec, did I do something wrong?
mansonstein said:
I flashed 1113(04)zip over 1112, then bootloop to rec, did I do something wrong?
Click to expand...
Click to collapse
Did you flash magisk 17.3 after rom zip
apokit said:
Did you flash magisk 17.3 after rom zip
Click to expand...
Click to collapse
Oh, didn't think it won't boot without flashing it, now it booted, thx!
Great! Thanks!! Zip flash is easy for the people who don't can't get to run GSI.
Now downloading and will report back
Edit:
Works great!!
Aleksanderbjorn said:
China stable 10.2.1.0
Won't flashing china Dev ROM through MIflash relock bootloader, or am I completely wrong?
Click to expand...
Click to collapse
Flash just the vendor IMG, to vendor from twrp, but no it won't as long as you uncheck relock bootloader
The zip rom file works great!
Congrats for your efforts dev!
Now if we have an app for the slider to work(like open camera) it would be great
The rom seems very good.....and fluid
Also there is a poco miui cam port for aosp based roms.Already there is mi8 magisk zip.....I dont know if it is easy to work on mi mix 3
Are there any changes from the most recent system image vs. this new Zip?
VENDOR FOR GSI (Generic System Image)
I'm not responsible for whatever damage this could possibly cause to your device.
Before Starting Make Sure You Treble Your Bevice By This Guide here If you appreciate the work i have done, Feel free to buy me a cup of coffee @paypal
Just to Make it clear, Treble Vendor for A8/A8+ is been ported from A7 2018 Oreo. We have tested many Oreo GSI from phhuson generic list and they are booted with this vendor. We have also tested Pie GSI, most of them didn't booted but few did(Phh-AOSP-9.0).
What is GSI?
A Generic System Image (GSI) is a system image. It is considered a "pure Android" implementation with Android Open Source Project (AOSP) code that any Treble device can run successfully. For more info visit here : https://source.android.com/setup/build/gsi
What is working?
Wi-Fi & Hotspot
Telephony & Ril (Mobile Data, Calls, SMS, MMS)
NFC
Camera
Bluetooth
GPS
Fingerprint
All Sensors
2D/3D Graphics + Vulkan
What is not working?
VoLTE
**Important: Vendor attached to this thread is stable, If you find any bugs on GSI, report it to their respective maintainer's with logs.
Instructions
1- Make Sure u Treble your device
2- Wipe System, Vendor, Data, Cache
3- Flash Vendor-Installer.zip (includes Kernel)
4- Flash GSI as system_image on TWRP
5- Reboot and start using your device
Downloads. Changelogs below
Credits
IF you helped in this project and i forgot you, tell me in a PM or in a reply
@corsicanu for repartition help
@lzzy12 , @TaifAljaloo , @Griffin98 , @somadsul , @ananjaser1211 for lot of contributions and helping to fix bugs
@enesuzun2002 , @neondragon1909 for helping to fix FP and NFC
@587.saboor for testing
XDA:DevDB Information
Project Treble, Vendor for Samsung Galaxy A8 / A8+ 2018
Kernel Source
Contributors
prashantp01
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2019-02-12
Last Updated 2019-02-12
Download
Vendor-Installer For Android 8.1 / 9.0 GSIs (includes Kernel)
You can download an A only ARM64 GSI from here
OpenGapps
Fix for bugs
Camera Fix
Fingerprint Fix
Changelog
V1.0
-initial release
reserved 2
Massive thanks to you guys !
Instructions
1- Make Sure u Treble your device
2- Flash Vendor-Installer.zip (includes Kernel)
3- Flash GSI as system_image on TWRP
4- Reboot and start using your device
bro after no. 1 am i wipe chache dalvik system and vendor and go to no. 2?
freemod said:
Instructions
1- Make Sure u Treble your device
2- Flash Vendor-Installer.zip (includes Kernel)
3- Flash GSI as system_image on TWRP
4- Reboot and start using your device
bro after no. 1 am i wipe chache dalvik system and vendor and go to no. 2?
Click to expand...
Click to collapse
Yes, u should wipe first
any screenshots?
Is this the same vendor as in this thread (but it's only the vendor here), or are there any differences? (if this is any better/different, can I "upgrade" to it without wiping my existing phh-treble install?)
Gabriel529 said:
any screenshots?
Click to expand...
Click to collapse
This is not a ROM, just a Vendor which lets you flash GSI ROMS. Therefore, no screenshots could be given.
VDavid003 said:
Is this the same vendor as in this thread (but it's only the vendor here), or are there any differences? (if this is any better/different, can I "upgrade" to it without wiping my existing phh-treble install?)
Click to expand...
Click to collapse
It's not the same, he fixes a lot of things to make it stable now (as NFC or Camera). About your installation question, I don't know.
ROM
Good night my friend. I wonder if using this increases the possibility of being compatible with other Roms, or does it basically equal to TWRP treble and creator treble equal to what you have here on another topic? If the answer is that it increases the possibility of roms compatible, can I do the installation over the other version creator and twrp treble? Sorry the English.
To anyone wondering: I've managed to replace my existing vendor+kernel by flashing the zip and suprisingly I had to remove the pattern lock from my phone and re-add it because system ui just chrashed every time I entered my pattern. Note: I'm on AOSP Phh-treble 9.0 V109 (I know V110 is already out but I'm lazy..)
Also I had to reflash magisk but that's expected after a new boot img.
Hi,
thank you so much for that vendor base. Everything seems to be ok, except one thing though : MTP does not work if i activate usb debugging. Is this vendor or gsi related ? btw i tried the four gsi you recommend in your original post, same behaviour. I'm on sm-a530f
Nice week end to all.
VDavid003 said:
To anyone wondering: I've managed to replace my existing vendor+kernel by flashing the zip and suprisingly I had to remove the pattern lock from my phone and re-add it because system ui just chrashed every time I entered my pattern. Note: I'm on AOSP Phh-treble 9.0 V109 (I know V110 is already out) but I'm lazy..
Also I had to reflash magisk but that's expected after a new boot img.
Click to expand...
Click to collapse
I didn't get u , also why r u using old builds, always go with the latest which includes fixes
cedlefou said:
Hi,
thank you so much for that vendor base. Everything seems to be ok, except one thing though : MTP does not work if i activate usb debugging. Is this vendor or gsi related ? btw i tried the four gsi you recommend in your original post, same behaviour. I'm on sm-a530f
Nice week end to all.
Click to expand...
Click to collapse
Thanks for the complement, issues related to mtp and usb debugging is because of magisk..... just report it to magisk developer with proper logs
prashantp01 said:
I didn't get u , also why r u using old builds, always go with the latest which includes fixes
Click to expand...
Click to collapse
It's just that I only checked the xda thread for phh treble and that still has v109 as the newest. (On github there is a v110 build) and I'm just lazy to upgrade, since this version is good for me.
About the thing, idk what you didn't get.
Anyways, great work!
Someone can post any screenshot?
Asop extended
mchlbenner said:
Asop extended
Click to expand...
Click to collapse
Here in my those rom based on Android 9, the video call of whatsapp hangs. Does this bug also occur?
VDavid003 said:
To anyone wondering: I've managed to replace my existing vendor+kernel by flashing the zip and suprisingly I had to remove the pattern lock from my phone and re-add it because system ui just chrashed every time I entered my pattern. Note: I'm on AOSP Phh-treble 9.0 V109 (I know V110 is already out but I'm lazy..)
Click to expand...
Click to collapse
How reliable is it? Is there any major bugs? How is battery life compared to OEM firmware?
How can I flash a .img.xz file?
edit: its an archive lol
mchlbenner said:
Asop extended
Click to expand...
Click to collapse
hello . are u can use fingerprint in aosp extended?
Introduction
This is my personal build of LineageOS 18.1 for Pixel 4a with the microG patches applied. If you do not want / need to use microG, it may be a better idea to use the official build available here: https://download.lineageos.org/sunfish. This build is exactly the same as the official build except for the microG patch.
For discussion about the official build, please use the other thread instead: https://forum.xda-developers.com/t/rom-official-sunfish-lineageos-18-1.4255751/
Installation
Before installation, make sure your phone is updated to Android 11 firmware on both of the slots.
Whether you are installing the ROM for the first time or updating the ROM, please make sure you reboot to recovery again after `adb sideload`-ing the ROM before installing add-ons such as Magisk and GAPPS.
1. Download `boot-XXXX.img` (this contains the recovery needed for initial flashing)
2. Download `lineage-18.1-XXXX-UNOFFICIAL-petercxy-sunfish.zip`
3. Reboot your phone to fastboot mode
4. Run `fastboot flash boot boot-XXXX.img` from your PC
5. Reboot your phone into recovery mode (`fastboot reboot`, then press volume up immediately)
6. Erase data
7. Select Apply Update -> Apply Update from ADB
8. Run `adb sideload lineage-18.1-XXXX-UNOFFICIAL-petercxy-sunfish.zip` and wait for installation to finish
9. If you do not need to install any add-ons (e.g. Magisk or GAPPS), then just reboot into system
10. Otherwise, if you do need to install add-ons, reboot into recovery again (this puts your phone into the recovery of the newly-installed system), then install the add-ons using sideload. If you want to use GAPPS, they must be installed here before you boot into system for the first time (this doesn't apply to microG).
11. Enjoy
Updating
1. Download the newly released zip and reboot your phone into recovery
2. Select Apply Update -> Apply Update from ADB
3. Run `adb sideload lineage-18.1-XXXX-UNOFFICIAL-petercxy-sunfish.zip` and wait for installation to finish
4. If you did not have any add-ons installed before update (e.g. Magisk or GAPPS), then just reboot into system
5. Otherwise, if you did, you need to reboot into recovery again at this point before rebooting to system and re-flash every single one of the add-ons you had before. If you do not re-flash them before rebooting to the new system, the boot will fail and your phone will switch back to the old system automatically.
6. Reboot and enjoy.
Note: You don't need to update official firmware manually while LineageOS is installed by flashing latest official factory images. This LineageOS build now ships with latest official firmware updates which are tested to work with the ROM. Please avoid flashing the firmware manually while LineageOS is installed to avoid unnecessary issues.
Known Issues
- Use Magisk v21.4 or later if you want Magisk
- Some applications require microG to be installed in system partition to function, in which case you can consider using the Magisk microG module
- The eSIM manager only works with either GAPPS or microG installed. Without them, you can use eSIM, but you will not be able to add / remove / rename / disable your eSIM. The eSIM manager will also crash once or twice on first boot without GAPPS or microG, but after that it won't crash anymore (the system automatically disables it until you install microG or GMS)
- Disabling / Enabling eSIM may hang even with GAPPS or microG. However, rebooting normally fixes the issue and makes your action effective.
- I provide no guarantee for SafetyNet status or compatibility with any app that requires SafetyNet. Google has been tightening its SafetyNet verification and there is really not much we can do about it, and frankly most apps that require SafetyNet should not have done so in the first place. If you need SafetyNet, you are on your own.
Downloads
Note: This build has compatibility issues with MindTheGapps (just like the recent LineageOS weekly builds). It will be fixed in newer official weekly builds, but since this build is for microG users, I am not going to upload a new microG-patched build just to work around a GAPPS compatibility issue.
20210610: June 05 security update; sorry for the delay, LineageOS had some issues while merging this month's ASB.
This update also fixed some long-standing bugs, such as the initial crash dialog of the eSIM manager (when GAPPS or microG is not installed), and the extraneous battery percentage option in settings -> battery. Read the LineageOS changelog for the full update.
- boot-20210610.img: https://mega.nz/file/TVolEYKL#MrJH-AVk37JDc_iKCVJ2lFGgFLG9czrE4FnJokbjnqI
- lineage-18.1-20210610-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/uYw30SxT#CwWc0GwqMYoAT54TJqPK2U7M8Y3OzhbpPuvejkOB65o
20210507: May 05 security patches
- boot-20210507.img: https://mega.nz/file/rcJVHQYZ#KjFu84Wnqdx4Rq0fd6TZUlJuaD-RXFXmMCJM4V4z0Tc
- lineage-18.1-20210507-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/jYBTESqZ#ZRc7CkUt8aUYgZRLpF6S1_LHdUXwcUOKPsCBorcYZ1w
20210410: April 05 security patches
- boot-20210410.img: https://mega.nz/file/eYggCKba#l7QJUMkvyEBtyptVMmWVbXochJKmY__X4VIwTla1KqE
- lineage-18.1-20210410-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/bUpQhAQJ#uTe-2nHLKYsfFBKuJg0VAYISUCGMTbIpaC9qjEHFZ1c
20210308: March 05 security patches and official firmware / binary updates.
- boot-20210308.img: https://mega.nz/file/WIZxjAwA#P77ZdJ2YEed5WWmlijKcyRMLJ30KG36eL0mhQGjZWjI
- lineage-18.1-20210308-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/eRBTkYzC#iNZUA84XR80V1so7YvjQ7TyJuZKGY9BZf-MGRtgQOH8
20210222: Updated sources; Removed some non-functional LiveDisplay features; Switched to using Google's wifi_ext HAL; Reserved more space in system partitions for potentially larger GAPPS packages
- boot-20210222.img: https://mega.nz/file/KVxRDY6L#7l7oejw-XEd_m1BUdp0_Z2TyHVLE2KkaGQ6g7Op7dpk
- lineage-18.1-20210222-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/mUgzGSbC#88q95qVsI-7RJsecM8L2MHZ6EwNXrs54Xk6yi428rjU
20210207: Updated LineageOS source; Applied 2021-02-05 security patches; Added support for glove mode; Enabled support property for Google Assistant; Optimized vibration
- boot-20210207.img: https://mega.nz/file/aZxlDKgC#_9VR2ruCYUqmX8gLCBKX1KSMAsBYFDsLA6utk5EjB-g
- lineage-18.1-20210207-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/yZpFQQRJ#PZlNYzI2t2fZdf1T3v6pMRi1zJe7J26f-Eu_Pohm7p4
20200118: Updated LineageOS source; Attempted to fix GAPPS bootlooping issue
- boot-20210118.img: https://mega.nz/file/ONYSRLKC#FhRYEhfsBndqcrJrhd1F4Tv3uu3UZNDYnQe3EcrMyC0
- lineage-18.1-20210118-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/3VRgwZQQ#ynCPIDbW42hXvBWp8MoG-R9eEEzvnaQ649ULZM8lrAc
20210109: Updated LineageOS sources and updated build fingerprint to January.
- boot-20210109.img: https://mega.nz/file/qU5T2CLY#A7dkDfRS0gUaKzphT2_mm0IHW9_-3cIR76yvNV1Cs4A
- lineage-18.1-20210109-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/GNwyxb4S#UGHclk8p60QuRWrGl3LI-Hur9X_VKF46tBNfuD0Z9-o
20210107:
1) Synchronized LineageOS updates and AOSP Jan 5 security patch
2) The ROM now ships with latest official firmware, so you won't need to worry about updating firmware separately (you still need latest official firmware when installing the ROM for the first time though)
- boot-20210107.img: https://mega.nz/file/OYRnwaII#3Ipj99mG5tpXouRRKMqWDJmimH8U2q5mZ5LKj8ZEmdo
- lineage-18.1-20210107-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/aEBTFAwK#EM3fKYQG4Y2najLhRkZlPqDwPSwkV-yfsSlH7Za7UYM
20201229: Synchronized LineageOS updates and fixed biometric authentication (fingerprint) in third-party applications.
- boot-20201229.img: https://mega.nz/file/yMow3aDb#ByY4yG6LeAquqBd2vu2UnZUz2xukHYjWbIfXnlkT_XM
- lineage-18.1-20201229-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/SA5WDAZQ#fMRB9w4LLSxSAGxHOtEmN9gRBTmrnF8ozKawM34cIxU
20201227:
- boot-20201227.img: https://mega.nz/file/6cI3lKKK#p8Nq3jUOsOoPDeV6yPj4hQtXGIHu8-D54_g3gkzdi0w
- lineage-18.1-20201227-UNOFFICIAL-petercxy-sunfish.zip: https://mega.nz/file/SdQnTaBa#83JjZojOS9JCRdYOng6Y0LLoUl8StAdrwsTbCSqAMhs
Sources
Device Tree: https://github.com/PeterCxy/android_device_google_sunfish
Kernel: https://github.com/PeterCxy/android_kernel_google_sunfish
Thanks: DirtyUnicorn sunfish contributors, SuperiorOS sunfish contributors, LineageOS coral contributors and the LineagOS community.
After some trial and error I got it up and running. After booting the ROM I returned to recovery, factory reset then side loaded Razorloves micro gapps.
Thanks for the build
Nice! Appreciate the work you've done on the trees!
@PeterCxy what vendor do you use? Can I clone it? Or should I extract myself?
Gave this a shot, everything seemed to loadup fine. Wasn't able to get call screen to show up tho, I flashed razorloves gapps, anything to do to get that to work?
ny-hardcore said:
Nice! Appreciate the work you've done on the trees!
@PeterCxy what vendor do you use? Can I clone it? Or should I extract myself?
Click to expand...
Click to collapse
I pushed the vendor blobs I extracted on my GitHub at https://github.com/PeterCxy/android_vendor_google_sunfish, but you can also extract it yourself as I have also pushed my full sunfish-proprietary-files{,-vendor}.txt
This is amazing, thanks @PeterCxy
Where the instructions state to be on A11 on both slots does that mean I can do a flash-all with the latest A11 factory image? Currently on LOS 17
xeropressence said:
Gave this a shot, everything seemed to loadup fine. Wasn't able to get call screen to show up tho, I flashed razorloves gapps, anything to do to get that to work?
Click to expand...
Click to collapse
Unfortunately I have zero clue about this, and I don't live somewhere Call Screening is supported in the first place. This would probably need to be figured out by someone other than me :/
EggZenBeanz said:
This is amazing, thanks @PeterCxy
Where the instructions state to be on A11 on both slots does that mean I can do a flash-all with the latest A11 factory image? Currently on LOS 17
Click to expand...
Click to collapse
Yes you can, but that flash-all script only flashes it on one slot, so to guarantee you have A11 on both slots you'd still need to manually switch the slot and execute that script a second time. The reason why you need A11 on both slots is that the recovery installs the new ROM to the inactive slot, so if the inactive slot is not also on A11, the ROM will probably not boot properly.
PeterCxy said:
Yes you can, but that flash-all script only flashes it on one slot, so to guarantee you have A11 on both slots you'd still need to manually switch the slot and execute that script a second time. The reason why you need A11 on both slots is that the recovery installs the new ROM to the inactive slot, so if the inactive slot is not also on A11, the ROM will probably not boot properly.
Click to expand...
Click to collapse
Thank you
EggZenBeanz said:
This is amazing, thanks @PeterCxy
Where the instructions state to be on A11 on both slots does that mean I can do a flash-all with the latest A11 factory image? Currently on LOS 17
Click to expand...
Click to collapse
You could just sideload the ota after booting the factory image as well.[/QUOTE]
10 hours so far and everything is smooth, great ROM, but I've noticed the battery consumption is less on SuperiorOS, need couple of days to confirm.
xeropressence said:
Gave this a shot, everything seemed to loadup fine. Wasn't able to get call screen to show up tho, I flashed razorloves gapps, anything to do to get that to work?
Click to expand...
Click to collapse
Considering call screen doesn't work on other Lineage pixel ROMs, this wouldn"t be any different.
Thank you very much @PeterCxy
I flash-all latest december 11 images and --set-active= slot to other partition and re flashed again. Following the instructions I now have LOS18 with micro-g running. Awesome! I would be interested in any builds with micro-g patches even when/if sunfish goes official LOS
Biometric/fingerprint unlock is not available in any apps like Bitwarden, wirex etc. Has this feature been removed in A11?
I have a working fingerprint and pattern unlock working on the phone, just no options in any usual apps
EggZenBeanz said:
Biometric/fingerprint unlock is not available in any apps like Bitwarden, wirex etc. Has this feature been removed in A11?
I have a working fingerprint and pattern unlock working on the phone, just no options in any usual apps
Click to expand...
Click to collapse
Do you have Play Services on it? I assume they use the Biometric API for that feature. And I assume that requires Play Services. Or a locked bootloader, some Trust Zone thing... basically it probably isn't designed to work on a ROM that doesn't have some integrity check or secure thingy access.
info:
Login with Biometrics on Android | Android Developers
In this codelab you will add biometric authentication to your app as part of your login process. You will not replace your current login process – users can still log in with their account password. Instead, you will augment your login process, giving users the convenience to not have to...
developer.android.com
jawz101 said:
Do you have Play Services on it? I assume they use the Biometric API for that feature. And I assume that requires Play Services. Or a locked bootloader, some Trust Zone thing... basically it probably isn't designed to work on a ROM that doesn't have some integrity check or secure thingy access.
info:
Login with Biometrics on Android | Android Developers
In this codelab you will add biometric authentication to your app as part of your login process. You will not replace your current login process – users can still log in with their account password. Instead, you will augment your login process, giving users the convenience to not have to...
developer.android.com
Click to expand...
Click to collapse
I don't use play services, but biometric unlock like autofill I think doesn't rely on play services, its part of AOSP? Both my Tab S5e and previous pixel 4a builds were LOS17 with no google services or microg installed and I have Biometric support in all usual apps
jawz101 said:
Do you have Play Services on it? I assume they use the Biometric API for that feature. And I assume that requires Play Services. Or a locked bootloader, some Trust Zone thing... basically it probably isn't designed to work on a ROM that doesn't have some integrity check or secure thingy access.
info:
Login with Biometrics on Android | Android Developers
In this codelab you will add biometric authentication to your app as part of your login process. You will not replace your current login process – users can still log in with their account password. Instead, you will augment your login process, giving users the convenience to not have to...
developer.android.com
Click to expand...
Click to collapse
I noticed the same issue with bitwarden, never had this issue before
EggZenBeanz said:
Biometric/fingerprint unlock is not available in any apps like Bitwarden, wirex etc. Has this feature been removed in A11?
I have a working fingerprint and pattern unlock working on the phone, just no options in any usual apps
Click to expand...
Click to collapse
hmmm it's also not available in my Keepass2Android. I'll look into this later -- I don't think fingerprint support is part of Play Services.
EggZenBeanz said:
Biometric/fingerprint unlock is not available in any apps like Bitwarden, wirex etc. Has this feature been removed in A11?
I have a working fingerprint and pattern unlock working on the phone, just no options in any usual apps
Click to expand...
Click to collapse
It might be an issue with the LineageOS source tree when I last synchronized. I checked some of my other devices with LOS built on the same date and they all don't have the fingerprint option available in apps.
PeterCxy said:
It might be an issue with the LineageOS source tree when I last synchronized. I checked some of my other devices with LOS built on the same date and they all don't have the fingerprint option available in apps.
Click to expand...
Click to collapse
I came from this build, https://forum.xda-developers.com/t/lineage-18-android-11-for-pixel-4a-sunfish.4199889/
And there it worked fine
I first installed with MicroG, then went with Gapps, and neither work
Official AOSP for Huawei (prague, mediapad, warsaw, rhone) - LeaOS-PHH
LeaOS is a project which based on AOSP with phhusson's Treble GSI patches. I have added my personnals patches for Huawei devices : Encryption, Signal Strengh, Speed Boot, Assisted GPS, NFC, Media App, Default Sound, MediaScanner fixes etc..) and some eremitein patch
Changelog :
LeaOS-PHH Jun 2022 version
Fix MiraCast / Wifi-Display crash
Pass SafetyNet (Basic + CTS) without Pixel 5 Spoof
Add dynamic root
Add option in TrebleApp to collect adb log and create txt file in sdcard
Add support of 8.0.0.416 with this patch (8-Huawei-PRA-FixPreav-A-v1.0-signed.zip)
LeaOS-PHH May 2022 version
Initial build from PHH AOSP A11-r48 (October)
Add support of data encryption
Add NFC Quick Setting (NFC by default are disabled)
Add Android SPL (Nov, Dec 2021, Jan, Feb, March 2022)
Add Default sound (ringtones, alarm and notification)
Add Huawei bootanimation (no sound)
Add support of multi-user
Pass SafetyNet (enable in TrebleApps setting)
Add several new functions in TrebleApps (dumlog, restartui, run on boot) by eremitein
Fix Signal strenght indicator (and icon)
Fix Media App permission
Fix MediaScanner crash
Fix Slow-Boot
Pre-requisite :
You must have TWRP installed, use this one (make sure to have the unofficial Android 11 one ! ). To install follow this guide "How to unlock Huawei P8 ligt 2017 (en).pdf" or french version "How to unlock Huawei P8 ligt 2017 (fr).pdf"
Installation (crypt or uncrypt)
Download file : "LeaOS-PHH-20220616-iceows-pra.7z" and extract img file
boot to TWRP
Wipe internal storage, format data
flash this file 1-Huawei-DataPrep-DeCrypt-A-v1.0-signed.zip to disable storage encryption or this file 1-Huawei-DataPrep-Crypt-A-v1.0-signed.zip to enable it. This zip change fstab file, wipe data partition and recreate subfolder /data/user*, /data/system* and /data/vendor*)
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional only PRA) flash AGPS patch : 7-AGPS-FIX-AltairVendor-v3.6-signed.zip
reboot to System and set up the phone with aosp first start assistant. You can also add most user
(optional) reboot to TWRP to install now Google Apps : Google Apps Lite ([RECOVERY]LiteGapps_arm64_11.0_v2.6_official.zip)
Enjoy !!!
Update (crypt or uncrypt)
Download file : "LeaOS-PHH-20220616-iceows-pra.7z" and extract img file
boot to TWRP
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional) flash AGPS patch, Google Apps :
1 - Google Apps lite (LiteGapps_Core_arm64_11.0_v2.5_official.zip)
2 - Enable AGPS (2 - AGPS-FIX-AltairVendor-v3.3-signed.zip)
reboot to System
Enjoy !!!
Source Code:
https://github.com/Iceows
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.x : stock 4.4.26 or Siberia_4.4.302-1.1.zip (this kernel not pass safetynet)
ROM Firmware Required: EMUI 8
Based On: PHH AOSP
Credits:
PHH
eremitein
rakinthegreat
And all the others who tested my patches and helped me improve this ROM
Support Group
reserved
Does syberia kernel work on any hi6250 device? Or it is only for pra?
Btw thanks for the rom...hope volte will work on this
I tried on my p10 lite using the uncrypt and it booted fine but I couldn't install or update apps. I tried to clear storage on play store and download manager it didn't work. When I went back to leaOS I tried this 1.3 version of the uncrypt and the same thing happened so it might be from that.
I tried both LiteGapps and OpenGapps.
Thank you for your dedication! Can this ROM use magisk24? If not, is there any Android 10 or higher ROM that can use magisk24 for hi6250?
Can I make calls normally after flashing the Siberia kernel? I want to use magisk24 on this ROM, how can I do it?
UselessShane said:
Does syberia kernel work on any hi6250 device? Or it is only for pra?
Btw thanks for the rom...hope volte will work on this
Click to expand...
Click to collapse
Siberia work on :
PRA-LX1/PRA-L31
RNE-L03
BLN-LX1
AGS-L03
[KERNEL][EMUI 8][P8 lite 2017] Siberia kernel
SIBERIA KERNEL Disclaimer: Use this kernel at your own risk. Flashing it may brick your device. I'm not responsible for any software/hardware and any kind of damages/losses. NOTE : Use only on EMUI8 base(stock or custom) kernel works on all...
forum.xda-developers.com
zuldorak said:
I tried on my p10 lite using the uncrypt and it booted fine but I couldn't install or update apps. I tried to clear storage on play store and download manager it didn't work. When I went back to leaOS I tried this 1.3 version of the uncrypt and the same thing happened so it might be from that.
I tried both LiteGapps and OpenGapps.
Click to expand...
Click to collapse
Use Only LiteGapps.
To install : GO to TWRP, flash 1.3 version of disk-uncrypt and after flash LiteGApps recovery version. Reboot
ZXGUi said:
Thank you for your dedication! Can this ROM use magisk24? If not, is there any Android 10 or higher ROM that can use magisk24 for hi6250?
Click to expand...
Click to collapse
I haven't tested on my AOSP ROM. Magisk 24 runs on the Lineage version of LeaOS. Use the canary version
ZXGUi said:
Can I make calls normally after flashing the Siberia kernel? I want to use magisk24 on this ROM, how can I do it?
Click to expand...
Click to collapse
Yes on version support by Siberia
If you have dual-sim phone, flash correct EMUI update for dual-sim
AltairFR said:
Siberia work on :
PRA-LX1/PRA-L31
RNE-L03
BLN-LX1
AGS-L03
Click to expand...
Click to collapse
also was-lx1a (my p10 lite 4gb ram)
AltairFR said:
Use Only LiteGapps.
To install : GO to TWRP, flash 1.3 version of disk-uncrypt and after flash LiteGApps recovery version. Reboot
Click to expand...
Click to collapse
I followed every step in the guide and it didn't work but I got it working by installing your leaOS and then this rom again.
Steps:
Stock Rom -> LeaOS-PHH (AOSP) - It didn't work can't install or update apps from store
Stock Rom -> LeaOS-PHH (AOSP) -> LeaOS -> LeaOS-PHH (AOSP) - Everything works
I installed magisk and securize phh to pass safetynet.
Everything is working now, great work!
zuldorak said:
I followed every step in the guide and it didn't work but I got it working by installing your leaOS and then this rom again.
Steps:
Stock Rom -> LeaOS-PHH (AOSP) - It didn't work can't install or update apps from store
Stock Rom -> LeaOS-PHH (AOSP) -> LeaOS -> LeaOS-PHH (AOSP) - Everything works
I installed magisk and securize phh to pass safetynet.
Everything is working now, great work!
Click to expand...
Click to collapse
OK.. Thanks...I will do a test. I just updated my pr to version 8.0.0.416
amonpaike said:
also was-lx1a (my p10 lite 4gb ram)
Click to expand...
Click to collapse
zuldorak said:
I followed every step in the guide and it didn't work but I got it working by installing your leaOS and then this rom again.
Steps:
Stock Rom -> LeaOS-PHH (AOSP) - It didn't work can't install or update apps from store
Stock Rom -> LeaOS-PHH (AOSP) -> LeaOS -> LeaOS-PHH (AOSP) - Everything works
I installed magisk and securize phh to pass safetynet.
Everything is working now, great work!
Click to expand...
Click to collapse
Hi
I have correct the problem, for the moment just format data before flash img
Thanks! Having an alternate OS to choose from is just what I was hoping for! Appreciate all the work you put in Can't wait to test this
AltairFR said:
Non-Official AOSP for Huawei (prague, mediapad, warsaw, rhone) - LeaOS-PHH
LeaOS is a project which based on AOSP with phhusson's Treble GSI patches. I have added my personnals patches for Huawei devices : Encryption, Signal Strengh, Speed Boot, Assisted GPS, NFC, Media App, Default Sound, MediaScanner fixes etc..) and some eremitein patch
Changelog :
LeaOS-PHH May 2022 version
Initial build from PHH AOSP A11-r48 (October)
Add support of data encryption
Add NFC Quick Setting (NFC by default are disabled)
Add Android SPL (Nov, Dec 2021, Jan, Feb, March 2022)
Add Default sound (ringtones, alarm and notification)
Add Huawei bootanimation (no sound)
Add support of multi-user
Pass SafetyNet
Fix Signal strenght indicator (and icon)
Fix Media App permission
Fix MediaScanner crash
Fix Slow-Boot
Pre-requisite :
You must have TWRP installed, use this one (make sure to have the unofficial Android 11 one ! ). To install follow this guide "How to unlock Huawei P8 ligt 2017 (en).pdf" or french version "How to unlock Huawei P8 ligt 2017 (fr).pdf"
Installation (crypt or uncrypt)
Download file : "LeaOS-PHH-20220610-iceows-pra.7z" and extract img file
boot to TWRP
Wipe internal storage, format data
flash this file 1-Huawei-DataPrep-UnCrypt-A-v1.0-signed.zip to disable storage encryption or this file 1-Huawei-DataPrep-Crypt-A-v1.0-signed.zip to enable it. This zip change fstab file, wipe data partition and recreate subfolder /data/user*, /data/system* and /data/vendor*)
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional) flash AGPS patch : 2 - AGPS-FIX-AltairVendor-v3.3-signed.zip
reboot to System and set up the phone with Lineage first start assistant. You can also add most user
(optional) reboot to TWRP to install now Google Apps : Google Apps Lite (LiteGapps_Core_arm64_11.0_v2.5_official.zip)
Enjoy !!!
Update (crypt or uncrypt)
Download file : "LeaOS-PHH-20220610-iceows-pra.7z" and extract img file
boot to TWRP
Wipe system, cache, dalvik/art cache
reboot to bootloader
run: fastboot flash system <drag system.img here>
(optional) flash Siberia kernel : fastboot flash kernel <drag Siberia.img here>
reboot to TWRP
resize system
flash this file 2-Huawei-system-UnCrypt-v1.3-signed.zip to not-allow data encryption or this file 2-Huawei-system-Crypt-v1.3-signed.zip to allow it
(optional) flash AGPS patch, Google Apps :
1 - Google Apps lite (LiteGapps_Core_arm64_11.0_v2.5_official.zip)
2 - Enable AGPS (2 - AGPS-FIX-AltairVendor-v3.3-signed.zip)
reboot to System
Enjoy !!!
Source Code:
https://github.com/Iceows
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.x (stock 4.4.26 or Siberia_4.4.302-1.1.zip)
ROM Firmware Required: EMUI 8
Based On: PHH AOSP
Credits:
DarkJoker360
PHH
Andy Yan
Hamido
eremitein
And all the others who tested my patches and helped me improve this ROM
Support Group
Click to expand...
Click to collapse
Hey, can you fix wireless screen cast because if want to enable screen mirriroring on any tvs etc. , my huawei pra lx 1 do a soft reboot. Then it didn't connect :-(
MinhniNG said:
Hey, can you fix wireless screen cast because if want to enable screen mirriroring on any tvs etc. , my huawei pra lx 1 do a soft reboot. Then it didn't connect :-(
Click to expand...
Click to collapse
Hard job, I will try to backport from LeaOS Lineage Version
Hi, I've been using this rom for some days and everything's working fine no reboots or anything I also find it faster than your other LeaOS.
This is just minor stuff but is it possible to add the styles option on the Display settings? I find the style option on phh customization a bit lacking and it doesn't work well. also the huawei animation on boot is faster than usual.
Like I said its minor visual stuff, everything working so far I love how fast this rom is, amazing job!
MinhniNG said:
Hey, can you fix wireless screen cast because if want to enable screen mirriroring on any tvs etc. , my huawei pra lx 1 do a soft reboot. Then it didn't connect :-(
Click to expand...
Click to collapse
Fix, please download Jun version
Why am I getting this error??....
I appricciate your work on the phone oficcialy dead from some time but I'd like to point you on sometihing:
I'm normal guy and I'm not flashing phone on regular basis every day. I do it when I need this, every few monts or years and I've done it few times. What really annoyes me is the fact that your guide for installation is unclear because I'm always following steps VERY CAREFULLY and if installation is unsucessfull after few tries, it's of course because I'm missing something here... Sorry but I already wasted 6 hours of my day off trying to install your rom using your guide so I really appriciate answer for my question: why am I getting this error ???
So, I was testing various and came across the guide for installing LineageOS17 GSI in the guides section. The way mentioned seems to be working
Procedure-
Install TWRP with latest security patches according to this guide https://forum.xda-developers.com/t/updated-september-2022-how-to-root-a7-2018.4488289/
Now, download Latest LineageOS19.1 vndklite-secure GSI.
Make sure to have backup of your internal storage, it might need to be wiped.
Install this GSI and right after that install Quantum Kernel 2.5 GSI version(for mtp) (check in attachments, it has Magisk 25.2 instead of 20.4 as mentioned in verbose) and then Magisk. After boot, check if MTP works in system, if it reboots, force reboot to TWRP and format Data and then reboot. That should fix it.
Without the kernel, seems to be stuck at logo.
No critcial bugs I have seen till now.
PS: always maintain a backup, I am not responsble if something goes wrong, like data loss.
Now, haven't tested it, but seems to me that any version other than vndklite-secure will have the 'camera in use' problem. So, try and let me know if that's the case.
Note - TWRP used is from a telegram group, which I couldn't share without the permission of owner. Search for it and you'll find it in A7 2018 telegram support group. TWRP version is 3.6.2.
Dmverity-disabler is to be flashed according to how to root guide only.
Tested on SM-A750F/DS (INS).
The reason why GSIs later than android 11 have a lockscreen bug is due to a vendor issue, in which Android 10
vendor of A7 2018 is not compatible with these GSI's. Apart from some Android 10 GSIs (like Havoc), lockscreen and everything works on these.
Abridged from https://forum.xda-developers.com/t/sm-a750fn-ds-unofficial-lineageos-17-1-gsi.4195065/
The img file for TWRP 3.6.2 is https://sourceforge.net/projects/batuhan-s-builds/files/TWRP/a7y18lte/recovery.img/download
To flash it as tar, use 7zip or any alternative to arcive as tar with default options, just make sure the image file remains as recovery.img, because it is present in this form on the phone partition. Tar can have any file name.
Source Telegram group for TWRP img file is @Exynos7885Updates
No sources have been specified by the developer.
For Indian SM-A750F, BL FILE IS INCLUDED
Note: For Camera in use error, always try to use vndklite versions of GSI, they have specific patch to work with some specific types of vendors. Currently looking for lockscreen fix, most probably, it is also a vendor related problem.
All of these are android 12 or 13 ones.
Possibility of usage:
Works Complete with magisk (including working Lockscreen): FLOS19.1(https://github.com/ChonDoit/treble_flos_patches/releases) [use (VNDK)lite secure ones, stability check needed]
no lockscreen : AncientOS S,ProtonAOSP 12.4.1, ProjectBlaze12.1, LineageOS19.1, LineageOS 20.0 TD-based VNDKLite(no bluetooth), pHH A12.1 GSI (secure), OctaviOS(vndklite), Evolution X 13 vndklite (no bluetooth), Miku UI 13 (no bluetooth), Pixel Experience Plus 13 (VNDK)lite, (no bluetooth),
with 'camera in use': ArrowOS 12.1, CherishOS, DotOS, Pixel Extended 13, Pixel OS 13
Don't boot at all: CorvusOS, BlissOS, Crdroid, ProjectAwaken 415, DerpFest A13
Android 13 GSI's have a problem with bluetooth that allow connection but no audio to go to headset.
Downloads links: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-List
where can you get twrp 3.6.2 for a750?
I have the latest stock firmware. Do I have to downgrade?
Did your phone has the latest firmware when you installed GSI ROM? Did you downgrade the firmware?
Also are banking apps like GPay work on GSI ROMS?
blazzer12 said:
I have the latest stock firmware. Do I have to downgrade?
Did your phone has the latest firmware when you installed GSI ROM? Did you downgrade the firmware?
Also are banking apps like GPay work on GSI ROMS?
Click to expand...
Click to collapse
No you don’t have to downgrade, just use the older 2020 Update BL file.
You can use UPI if you can securize the gsi and follow the steps of fixing safetynet. Search them
Thank you for the response.
Can you update the BL file file from 2020?
blazzer12 said:
Thank you for the response.
Can you update the BL file file from 2020?
Click to expand...
Click to collapse
No, updating with later BL's can cause issue with custom recoveries.
Does anyone have issues with mobile hotspot in GSIs. In OneUI roms, mobile hotspot works normally, but on GSIs, it does turn on and discoverable, but without internet access. USB tethering works fine on all roms though.
My phone is SM-A750GN
VorzaCu said:
Does anyone have issues with mobile hotspot in GSIs. In OneUI roms, mobile hotspot works normally, but on GSIs, it does turn on and discoverable, but without internet access. USB tethering works fine on all roms though.
My phone is SM-A750GN
Click to expand...
Click to collapse
My 2.4Ghz hotspot work fine. SM-A750F/DS INS
Do sms and calls work properly in FLOS 19.1?