Database Info

[GUIDE][REBRAND] Honor 9 [ANY REGION]

Disclaimer:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TOOL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Credits:
All the credits go to user gaguga and the people from the 4PDA. The contents of this guide are not my work - I merely translated it.
Requirements:
1. For this method to work you first need to unlock the bootloader or at least obtain the unlock code. That is explained in threads Unlock bootloader HONOR 9 and [Guide] How to get Bootloader unlock Code easily through Chinese site.
2. Owners of non-Chinese models have to disable FRP. Read about what that is and how to disable it here.
3. Enable the USB debugging mode in the Developer options.
MOD EDIT: Updated HWOTA found here thanks to @gaguga
Steps:
1. Download the file HWOTA.zip and unpack it to the root of your system. For instructions in English instead of Russian replace the hwota.sh file with this one.
2. Make a backup of all the important files since all the data will be erased during the process (consider this as a warning!).
3. Check if the USB debugging is enabled and the FRP disabled.
4. Download the three zip-archives from here if you wish to flash the EU version of ROM. Otherwise download the files of the desired region using Firmware Finder.
5. Move the downloaded files to folder "HWOTA\Update" and rename them in this way:
- update_data_full_public .zip to update_data_public .zip
- update_full _... .zip to update_all_hw .zip
- update.zip remains as is
6. Launch the file named update.bat which is located in the folder HWOTA and follow the instructions.
7. As a mode of update first choose the Rebrand option, then go to the Recovery and wipe all the data (including internal storage). If you only want to update the firmware to the newest version you can skip this step and go directly to the next one.
8. Run the batch file again and select Change the firmware option this time.
9. If you experience bootloops after flashing go to the Recovery and perform a factory reset (including wiping internal storage) then flash the firmware again.

Reserved.

lsvet1 said:
Disclaimer:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TOOL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Credits:
All the credits go to user gaguga and the people from the 4PDA. The contents of this guide are not my work - I merely translated it.
Requirements:
1. For this method to work you first need to unlock the bootloader or at least obtain the unlock code. That is explained in threads Unlock bootloader HONOR 9 and [Guide] How to get Bootloader unlock Code easily through Chinese site.
2. Owners of non-Chinese models have to disable FRP. Read about what that is and how to disable it here.
3. Enable the USB debugging mode in the Developer options.
Steps:
Download the file HWOTA.zip and unpack it to the root of your system.
1. Make a backup of all the important files since all the data will be erased during the process (consider this as a warning!).
2. Check if the USB debugging is enabled and the FRP disabled.
3. Download the three zip-archives from here if you wish to flash the EU version of ROM. Otherwise download the files of the desired region using Firmware Finder.
4. Move the downloaded files to folder "HWOTA\Update" and rename them in this way:
- update_data_full_public .zip to update_data_public .zip
- update_full _... .zip to update_all_hw .zip
- update.zip remains as is
5. Launch the file named update.bat which is located in the folder HWOTA and follow the instructions. Some instructions are in Russian since I haven’t yet had the time to translate them. Use Google Translate for the moment.
6. As a mode of update first choose the Rebrand option, then go to the Recovery and wipe all the data (including internal storage).
7. Run the batch file again and select Change the firmware option this time.
8. If you experience bootloops after flashing go to the Recovery and perform a factory reset (including wiping internal storage) then flash the firmware again.
Click to expand...
Click to collapse
Any idea why this keeps happening?

@RobertHarkness It seems to be an encoding problem. Check out this thread.

lsvet1 said:
@RobertHarkness It seems to be an encoding problem. Check out this thread.
Click to expand...
Click to collapse
I'm still running into trouble

RobertHarkness said:
I'm still running into trouble
Click to expand...
Click to collapse
Did you run it as admin?

lsvet1 said:
Did you run it as admin?
Click to expand...
Click to collapse
Yeah, No luck.

This looks promising... but we have to conqur language barrier first... Hope Honor 9 owner best of luck!

I got this to work, but back button no longer works :S

RobertHarkness said:
I got this to work, but back button no longer works :S
Click to expand...
Click to collapse
At 130 firmware does not work
For 120 works

gaguga said:
At 130 firmware does not work
For 120 works
Click to expand...
Click to collapse
Yeah I worked it out, All is working now and my phone is running perfectly

RobertHarkness said:
Yeah I worked it out, All is working now and my phone is running perfectly
Click to expand...
Click to collapse
it's good
Here in English
https://yadi.sk/d/-EIIGunq3LqChX

gaguga said:
it's good
Here in English
https://yadi.sk/d/-EIIGunq3LqChX
Click to expand...
Click to collapse
Thank you, I updated the guide.

lsvet1 said:
Thank you, I updated the guide.
Click to expand...
Click to collapse
7 point is only needed if you change China to eu
This is a file change oeminfo

gaguga said:
7 point is only needed if you change China to eu
This is a file change oeminfo
Click to expand...
Click to collapse
Okay, added the explanation.

it works! thx a lot!

I have updated my L09 phone through DNS from FF
So far everything is working fine
I've seen that my battery is much improved

Nice guide. I'm just wondering, if I have the STF-AL10 model (6gb ram/64GB), could I flash to the STF-L09 firmware? From what I've seen, the European firmware is 4gb ram, so the hardware is slightly different to my Chinese 6gb variant.

Ring0h said:
Nice guide. I'm just wondering, if I have the STF-AL10 model (6gb ram/64GB), could I flash to the STF-L09 firmware? From what I've seen, the European firmware is 4gb ram, so the hardware is slightly different to my Chinese 6gb variant.
Click to expand...
Click to collapse
You can, that's the whole point of rebranding.

One more question, does it cover every variant of honor 9?! Or there's a variant which can't be rebranded

[Tutorial][9.0][GSI][OOS] Flashing Oneplus Oxygen OS on Nokia 7 plus (B2N)

Hi guys, I started to be bored of AOSP roms, so I started taking a look if I can get OOS from OnePlus working. Thanks to the amazing work on Erfan (please consider donating a beer to this guy here https://www.paypal.me/erfanoabdi ), without him we wouldn't be possible to get ROMS such as MIUI on Nokia Devices and Others. Allright, let's get it started.
First, You should download The AOSP-based OOS made by Erfan from here https://mirrors.lolinet.com/firmware/gsi/OxygenOS-AB-9-20190630-ErfanGSI.img.7z (if there is an update i'll update the link) and the "other files" from my Drive repo: https://drive.google.com/open?id=1mdW6RBeLXVWnI7vpzbwIVHYG5onUXY9W
Before getting started, I have to tell you this:
HTML:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Allright, let's get started:
Since Oneplus decided to use F2FS instead of classical EXT4, you can't flash the GSI with TWRP or fastboot from Nokia/Fih. Instead, you have to flash it with AOSP (Google) platform-tools
To get the latest platform-tools, including the adb and fastboot command, download from this link:
For Linux
For Windows
Also, for Windows, you need USB drivers here, after you downloaded it, install it, following the on screen instructions.
Now, after you got platform-tools zip and the Archive containing OxygenOS-AB-9-20190630-ErfanGSI.img and the Drive files , extract it somewhere in the same folder on your PC
Now, go into that folder (cd) from your terminal of choice till you get into the folder containing fastboot and adb executables.
1.Reboot your phone into download mode, either by while plugging it on USB pressing volume - and power button, or by ADB, according you have (USB Debugging) enabled in Developer Option
HTML:
adb reboot bootloader
2.Flash the April boot.img with this command
HTML:
fastboot flash boot April-stock-boot.img
3. Reboot your phone in Download Mode
4. Flash the GSI on the system partition
HTML:
fastboot flash system OxygenOS-AB-9-20190630-ErfanGSI.img
5. Wipe data
HTML:
fastboot -w
6. Boot Temporary TWRP
HTML:
fastboot boot Nokia7plusv3.2.1.0-noflash.img
7. Now go enable MTP so we can get the Permissiver_v4.zip transfered to the internal storage. After that, go to Install and select Permissiver_v4.zip
8. Boot phone, first boot should take 5 mins or more.
9. Transfer gms.apk on storage and install the app.
10. Reboot in download mode, boot temporary TWRP
11. Mount system partiton, go on TWRP File Manager, then remove the following apps:
For sim to work: remove com.quicinc.cne.CNEService.CNEServicApp
And com.qti.dpmserviceapp
By removing this, you remove the voLTE functionability. But that's the only way to get it working.
on /system/system/app and /system/system/priv-app
Everything should be good to go
Tested on TA-1046 dual sim
WARNING: THIS IS GOING TO DELETE EVERYTHING THAT YOU HAVE ON YOUR PHONE, AND YOU SHOULD HAVE UNLOCKED BOOTLOADER.

my sims were working on first setup no needed of removing apps you mentioned,
however here are somethings to know
it doesn't show build number, Model Number & OOS version
doesn't show charging(weather rapid or DASH)
unable to ad face unlock
finger print isn't by default always active,
no camera app on startup (i manually installed GCam for Nokia7+, may because of , on previous rom i had disabled default camera app so.)
face unlock is must have feature.
---------- Post added at 11:45 AM ---------- Previous post was at 11:40 AM ----------
AlahmadPR said:
my sims were working on first setup no needed of removing apps you mentioned,
however here are somethings to know
it doesn't show build number, Model Number & OOS version
doesn't show charging(weather rapid or DASH)
unable to ad face unlock
finger print isn't by default always active,
no camera app on startup (i manually installed GCam for Nokia7+, may because of , on previous rom i had disabled default camera app so.)
face unlock is must have feature.
Click to expand...
Click to collapse
because on restart or on "adb restart bootloader "
its misbehaving,
and bugs mentioned above.

AlahmadPR said:
my sims were working on first setup no needed of removing apps you mentioned,
however here are somethings to know
it doesn't show build number, Model Number & OOS version
doesn't show charging(weather rapid or DASH)
unable to ad face unlock
finger print isn't by default always active,
no camera app on startup (i manually installed GCam for Nokia7+, may because of , on previous rom i had disabled default camera app so.)
face unlock is must have feature.
---------- Post added at 11:45 AM ---------- Previous post was at 11:40 AM ----------
because on restart or on "adb restart bootloader "
its misbehaving,
and bugs mentioned above.
Click to expand...
Click to collapse
These bugs are caused by the actual GSI, because it is running ob different hardware compared to OnePlus. By fixing them, this will result in a buggy experience. You can talk to Erfan to give him an overall idea.

his user id
ThDor45 said:
These bugs are caused by the actual GSI, because it is running ob different hardware compared to OnePlus. By fixing them, this will result in a buggy experience. You can talk to Erfan to give him an overall idea.
Click to expand...
Click to collapse
his address or link please

Development [ROM][OFFICIAL] Lineage Modded 18.1 [DISCONTINUED]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS Modded is a free, community built, aftermarket firmware distribution of Android 11 (R), which is designed to increase performance and reliability over stock Android for your device.
LineageOS Modded is based on the Android Open Source Project and LineageOS with extra contributions from many people within the Android community.
All the source code for LineageOS Modded is available in the LineageOS Modded Github repo.
Flashing Instructions:-
TinyFastbootScript:-
Make sure to wipe userdata
1. Download TinyFastbootScript
2. Download the ROM named *Images*
3. Unpack TinyFastbootScript and the ROM into the same directory
4. Run the bat file for TinyFastbootScript
5. Choose latest fastboot version
6. Place device in bootloader mode
7. Run the command for flashing custom firmware
8. Done!
Lineage Recovery:-
Make sure to wipe userdata, ensure you have at least taken one stock OTA!
1. Download LOS Recovery image
2.
Code:
fastboot flash boot LOSrecovery.img
3.
Code:
fastboot reboot recovery
4. Touch Apply Update -> Apply from ADB
5.
Code:
adb sideload lineage-18.1-20210712-HOMEMADE-nio.zip
6. Reboot and Done!
Bugs :
YOU TELL ME
* Drop a comment down below if you need any help, you can also Join https://t.me/electimonrel on telegram if you need any help.
Downloads:
Lineage-Modded:
https://build.lolinet.com/file/lineage/nio/
Lineage-Modded Recovery:
https://build.lolinet.com/file/lineage/nio/LOSrecovery.img
Contributors
@Electimon, @erfanoabdi
Source Code: moto-sm8250
Version Information
Status: Stable
Updated: June 21 2021: Fixed safetynet, and June Patch
June 25: Fix some audio issues and readd pixel live walls
July 7: ↓ Build: 131
Updated Vendor Blobs to May Security Patch
Updated GPS/Location to LA.UM.9.12.r1-11500-SMxx50.0
Enabled Touch in LineageOS Recovery
Allow for unsigned packages to be flashed in LineageOS Recovery (e.g. Magisk)
Updated GPS Configuration files
Merged Latest CAF Tag to kernel
Upstream Sched / Improved Performance
Add SIM Switch Tile
Enabled Notification and Battery LED
July 12: ↓ Build: 138
Improved Memory Management
Misc Kernel Improvements
July Security Update
October -2: ↓ Build: 156
• Hopefully fixed Android Auto
• Updated blobs to pstar
• Added Assistant key remapping and double tap fingerprint gestures
• Added my new VoidKramel Venus kernel built with clang 12 and fully upstreamed
• Switched to source built DTB/DTBO
• Improved refresh rate timers
• ModSettings has a brand new adaptive icon
• Switched ZRAM sizes per ram variant
• Lastly, updated security patches

Excited to hear this~ have been using Lineage in my old OP X & OP 3T

Amazing news, the first ROM for our G100/EdgeS arrived, I will test 4 sure , thanks dev !

If anyone succeeds at rooting with this ROM can you provide instructions? TIA

Timmons said:
If anyone succeeds at rooting with this ROM can you provide instructions? TIA
Click to expand...
Click to collapse

Just to know, I guess this rom will remove support for the "Ready For" platform for games and app and also other moto specific modules?

draxema said:
Just to know, I guess this rom will remove support for the "Ready For" platform for games and app and also other moto specific modules?
Click to expand...
Click to collapse
It will retain gestures and moto camera

June patch read post

-130 build, read post

may I ask: Does the ROM come without Google dependencies / GApps?

Hiajen said:
may I ask: Does the ROM come without Google dependencies / GApps?
Click to expand...
Click to collapse
Comes with

Electimon said:
Comes with
Click to expand...
Click to collapse
Hello, keep the motorcycle camera? but I will lose some functions of series I have in moto edge s 5g chinese version but I like to fiddle I already have my motorcycle unlocked and I want to test the rom thank you very much for working but I have to do memory to reinstall the chinese rom that I have as standard I suppose I want the boot img there will be root in lineage thank you very much

• Improved Memory Management
• Misc Kernel Improvements
• July Security Update
Updated, please reread post

Hello
Please tell me what is the difference between
lineage-18.1-2021xxxx-HOMEMADE-nio.zip
and
Lineage-images-18-2021xxxx-xxxx-nio-1xx.zip?
There is a 300M difference in size.

dfert said:
Hello
Please tell me what is the difference between
lineage-18.1-2021xxxx-HOMEMADE-nio.zip
and
Lineage-images-18-2021xxxx-xxxx-nio-1xx.zip?
There is a 300M difference in size.
Click to expand...
Click to collapse
One is most obviously a set of images and the other a OTA package.

Hello, 2 more questions:
1, "July 7: ↓ Build: 131 Enabled Notification and Battery LED"
my Edge S do not have a LED, how it show after flash this ROM?
2, How large the GApps it has? Only google service and google play or have a lot of google apps like gmail/youtube/maps/driver/assistant etc?

dfert said:
Hello, 2 more questions:
1, "July 7: ↓ Build: 131 Enabled Notification and Battery LED"
my Edge S do not have a LED, how it show after flash this ROM?
2, How large the GApps it has? Only google service and google play or have a lot of google apps like gmail/youtube/maps/driver/assistant etc?
Click to expand...
Click to collapse
It does have a LED, it just isn't enabled by default.
The GApps is a standard package you will find on stock.

Electimon said:
It does have a LED, it just isn't enabled by default.
The GApps is a standard package you will find on stock.
Click to expand...
Click to collapse
Nice, LED is very useful!
But I hate youtube/assistant/one, etc, could you please only contain google service and google play in the new release ROM? Thanks!

dfert said:
Nice, LED is very useful!
But I hate youtube/assistant/one, etc, could you please only contain google service and google play in the new release ROM? Thanks!
Click to expand...
Click to collapse
Unfortunately not. You can uninstall the apps with magisk.

Touch screen fixed???

Development [ROM][OFFICIAL] LOS-Modded 19.0[DISCONTINUED]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS Modded is a free, community built, aftermarket firmware distribution of Android 12 (S), which is designed to increase performance and reliability over stock Android for your device.
LineageOS Modded is based on the Android Open Source Project and LineageOS with extra contributions from many people within the Android community.
All the source code for LineageOS Modded is available in the LineageOS Modded Github repo.
Make sure to wipe userdata, ensure you have at least taken one stock OTA!
Flashing Instructions:-
TinyFastbootScript:-
Make sure to wipe userdata
1. Download TinyFastbootScript
2. Download the ROM named *Images*
3. Unpack TinyFastbootScript and the ROM into the same directory
4. Run the bat file for TinyFastbootScript
5. Choose latest fastboot version
6. Place device in bootloader mode
7. Run the command for flashing custom firmware
8. Done!
Fastboot Method:-
1. Download the Images zip
2.
Code:
fastboot update *Images*.zip
3. Reboot and enjoy!
Bugs :
Permissive
Safetynet
DualSIM
Some Settings Functions
* Drop a comment down below if you need any help, you can also Join https://t.me/electimonrel on telegram if you need any help.
Downloads:
Lineage-Modded:
https://build.lolinet.com/file/lineage/nio/
Contributors
@Electimon, @erfanoabdi, @dianlujitao
Source Code: moto-sm8250
Version Information
Status: Beta
Jan 06: initial release

Amazing work

awesome

Great work on the ROM electimon, smoothest available, and the battery management is excellent.

Hi,
I think scoped storage doesn't work properly on my Moto Edge S with Lineage 19. I'm trying to use some apps that require it, but they crash every time I try to add a directory, like aethersx2 for example.

Hi all
I successfully installed the Rom but only sim 1 work
How to activate two sims please .
Thanks all

Makhreta said:
Hi all
I successfully installed the Rom but only sim 1 work
How to activate two sims please .
Thanks all
Click to expand...
Click to collapse
check again the above bug list

bawitdol said:
check again the above bug list
Click to expand...
Click to collapse
Yes i know ,
so this mean no solution for this problem ?

Makhreta said:
Yes i know ,
so this mean no solution for this problem ?
Click to expand...
Click to collapse
Some people on Telegram have reported both sims working by flashing Evolution X, then flashing to los-modded 19 without wiping. Your results may vary though

Beetle84 said:
Some people on Telegram have reported both sims working by flashing Evolution X, then flashing to los-modded 19 without wiping. Your results may vary though
Click to expand...
Click to collapse
but i cannot find evolution x rom for this device ???!!!

Makhreta said:
but i cannot find evolution x rom for this device ???!!!
Click to expand...
Click to collapse
Motorola Moto G100 / Edge S
The Motorola Moto G100 / Edge S is a 6.7" phone with a 1080x2520p resolution display. The Qualcomm SM8250-AC Snapdragon 870 5G chipset is paired with 6/8GB of RAM. The main camera is 64+16+2MP and the selfie camera is 16+8MP. The battery has a 5000mAh capacity.
forum.xda-developers.com

is it android 12?

i tried version 18 and the two sims is o.k

HOW TO INSTAL MAGISK in this rom
1. download TWRP 3.5.2 and magisk 23.0
2. command <fastboot boot twrp.img> in bootloader mode
3. command <adb push magisk.zip /sdcard> in twrp
4. flash magisk.zip file
5. reboot to system
^^

Works great thanks!
having some issues with Android Auto showing black display since switching to this tho?
anyone know how to fix?

Is there a newer build?

xisa11 said:
Is there a newer build?
Click to expand...
Click to collapse
Under development

Just wondering what the differences would be between thins and the non-modded Lineage? I'm assuming more features, add-ons, but what are they?

Hello and thanks to everyone who is working on these different Roms for the g100!
One question, which is the most stable Rom for the g100 (without Google) to use as an daily driver?
Is this Rom 19.0 capable as an daily driver?
Thank you

How do I flash this on Linux ?. I suppose it is a bunch of fastboot commands but I am not sure.

How To Guide [GUIDE] Install LineageOS 19.1 with gapps

Notes:​* I am not a developer.
* I did all of this on Arch Linux, you shouldn't have trouble doing this on either Linux or Windows.
* See the Telegram group if you have issues - search for "Xiaomi 12 OFFICIAL" on TG, unfortunately cannot link directly to it on XDA.
* This is an unofficial version of LineageOS
* Thanks to @gr0ndpa whose writeup I based this guide on.
* Massive thanks to @ArianK16a who actually made LOS work on Xiaomi 12, despite Xiaomi breaking GPL licensing and not providing full kernel sources for Android 12
Prerequisites:​* Your bootloader must be unlocked. This thread does not cover this.
* You should use latest platform tools on Windows.
* Your device should be charged above 50%. Well, it doesn't have to be, but this is just for your phone's safety.
* Download 4 required .img files - boot, vendor_boot, dtbo and recovery from the latest build that has them all - rest miss recovery/vendor_boot, linking latest one at the time of writing for convenience
* Download latest ROM of your choosing (GMS=with gapps, VANILLA=no gapps) from arian-ota/ota
* If you intend to root the device with Magisk, also download latest boot.img
* Make a proper backup if needed and push it to another storage.
First steps:​* After you have unlocked the bootloader, device will reboot automatically. Finish the setup, enable developer settings and finally enable USB-Debugging in developer settings.
* In Windows open the folder in which you have unzipped the platform tools.
* Hold left shift and press right click, click "open powershell window here"
* Connect the phone via USB
* Execute the following in Windows Terminal and grant the permissions for this PC on your device:
Code:
adb devices
* Execute the following to either reboot to fastboot or fastbootd. Flashing works from either, I used fastbootd:
Code:
adb reboot fastboot # fastbootd
adb reboot bootloader # fastboot
The flashing procedure:​* Flash boot, vendor_boot, dtbo and recovery by executing the following in Windows Terminal:
Code:
fastboot flash boot lineage-19.1-20220618-UNOFFICIAL-cupid-boot.img
fastboot flash vendor_boot lineage-19.1-20220618-UNOFFICIAL-cupid-vendor_boot.img
fastboot flash dtbo lineage-19.1-20220618-UNOFFICIAL-cupid-dtbo.img
fastboot flash recovery lineage-19.1-20220618-UNOFFICIAL-cupid-recovery.img
* Finally execute the following, or reboot to recovery by holding VOLUME UP and POWER buttons until you see Mi logo on your device's screen:
Code:
fastboot reboot recovery # or bootloader
* If you get MIUI recovery, reboot back to fastboot, you should hopefully get LOS fastbootd now and be able to redo the steps and get LOS recovery next
Sideload the ROM from LOS recovery:​* ALL DATA WILL BE ERASED WITH THE NEXT STEP
* Go to Factory reset and perform Format data / Factory reset
* Go to Apply update, followed by Apply from ADB
* Execute the following Windows Terminal:
Code:
adb sideload lineage-19.1-20220810-UNOFFICIAL-GMS-cupid.zip
* Reboot your device
Rooting:​* Follow this thread but use the latest boot.img you downloaded earlier instead of the one from stock ROM.
Certification:​* If you won't fake the build prop to get certified status, you should at least follow Alphabet's instructions to make sure your device does not potentially get blacklisted from Play services
* Certification is required to run some apps - i.e. Netflix, Revolut, ...
* You can view certification state in Play store -> Profile -> Settings -> About -> Play Protect certification. This will cache the status. For a while, how to force the check again is shown down below
* Your device will not be certified on this ROM because it does not attempt to fake build props
* To get known good props for security update date and device fingerprint, you need either a rooted device with MIUI you want to extract the values from by executing the following in root adb shell:
Code:
grep -e fingerprint -e security_patch /system/build.prop
Or you can download latest recovery .zip from the download thread and open the file located in it from /META-INF/com/android/metadata in the archive
* Here's an example of the two values needed for my EEA device I got from the recovery zip:
Code:
2022-07-01
Xiaomi/cupid_eea/cupid:12/SKQ1.211006.001/V13.0.19.0.SLCEUXM:user/release-keys
* Install the following module through Magisk https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf
* Run the following:
Code:
adb shell
su
props
1 # Set the fingerprint to the one you obtained
5 # Add a custom prop with the name ro.build.version.security_patch, it should already exist, but it is most likely wrong
* Install the following module through Magisk
Releases · kdrag0n/safetynet-fix
Google SafetyNet attestation workarounds for Magisk - kdrag0n/safetynet-fix
github.com
* After the final reboot, remove storage of "Google Play Store" app to refresh the cache manually, open Play store and check the status, you should be in the green now
Known issues:​* Face recognition libraries are not included due to legal reasons, if one is interested in adding them, see the discussion starting here
* Minimum brightness is too bright. This can be mitigated by adding the "Extra Dim" card in the notification menu and long-pressing it to configure your desired intensity.
* When Smooth Display (120Hz) is enabled, screen flashes/redraws when it changes to and from 90Hz. This is more noticeable with lower brightness and no light in the room, and not really noticeable in daylight. Can be triggered by opening settings and typing a word and waiting half a second.
* Netflix(and only Netflix) is not available from the Play store on GSM ROM even with certification. Netflix provides an APK on their website, but that still gives me an unsupported device message. https://help.netflix.com/en/node/57688

Thanks for the great guide. I was able to install it without any issues whatsoever.

So is everything (including Fingerprint, all cameras, stereo speakers, BT, WiFi, Dual-SIM, VoLTE, VoWiFi, Fast charging) working?

除了人脸识别之外，一切都很好。
Translation: Everything is fine except for the face recognition.
Click to expand...
Click to collapse
Hi,
As a "one time" courtesy, I have translated your post to this thread and because it was not a spam
Please be respectful and observant of XDA Rule #4
for all of your future posts.
Spoiler: Forum Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and enjoy your stay on XDA.
Regards
Sib64 - Moderator

Does the camera work with the original functions?
How long will this lineageOS be supported for the xiaomi12?
"Download 4 required .img files - boot, vendor_boot, dtbo and recovery from the latest build"
What does that mean, "4"? I see on the website ( https://github.com/arian-ota/ota/releases/tag/19.1-cupid_gms-2fd712b6 ) only 3 files to download?

xiaomi cam is not working on LOS ... you have to use gcam etc ...
read carefully ... you have to use these 4 files from 20220618 release and only the gms rom image from 20220810 ...

Installed last night. Cant use Wallet, Google Play Store is not certified, SMS receiving problems sometimes. Google Assistant says it isn't available for this language, but it is set to english.
Can i somehow get google play certified and wallet working? Tried to register play sotre id on google site but that didnt help.

schmidt93 said:
Installed last night. Cant use Wallet, Google Play Store is not certified, SMS receiving problems sometimes. Google Assistant says it isn't available for this language, but it is set to english.
Can i somehow get google play certified and wallet working? Tried to register play sotre id on google site but that didnt help.
Click to expand...
Click to collapse
i'm waiting to... if wallet dosent work, i stay on .eu

schmidt93 said:
Installed last night. Cant use Wallet, Google Play Store is not certified, SMS receiving problems sometimes. Google Assistant says it isn't available for this language, but it is set to english.
Can i somehow get google play certified and wallet working? Tried to register play sotre id on google site but that didnt help.
Click to expand...
Click to collapse
You can try to root the phone with Magisk and use Magisk hide.

C0rn3j said:
Notes:​* I am not a developer.
* I did all of this on Arch Linux, you shouldn't have trouble doing this on either Linux or Windows.
* See the Telegram group if you have issues. - Edit Moderation -
* This is an unofficial version of LineageOS
* Thanks to @gr0ndpa whose writeup I based this guide on.
* Massive thanks to @ArianK16a who actually made LOS work on Xiaomi 12, despite Xiaomi breaking GPL licensing and not providing full kernel sources for Android 12
Prerequisites:​* Your bootloader must be unlocked. This thread does not cover this.
* You should use latest platform tools on Windows.
* Your device should be charged above 50%. Well, it doesn't have to be, but this is just for your phone's safety.
* Download 4 required .img files - boot, vendor_boot, dtbo and recovery from the latest build that has them all - rest miss recovery/vendor_boot, linking latest one at the time of writing for convenience
* Download latest ROM of your choosing (GMS=with gapps, VANILLA=no gapps) from arian-ota/ota
* If you intend to root the device with Magisk, also download latest boot.img
* Make a proper backup if needed and push it to another storage.
First steps:​* After you have unlocked the bootloader, device will reboot automatically. Finish the setup, enable developer settings and finally enable USB-Debugging in developer settings.
* In Windows open the folder in which you have unzipped the platform tools.
* Hold left shift and press right click, click "open powershell window here"
* Connect the phone via USB
* Execute the following in Windows Terminal and grant the permissions for this PC on your device:
Code:
adb devices
* Execute the following to either reboot to fastboot or fastbootd. Flashing works from either, I used fastbootd:
Code:
adb reboot fastboot # fastbootd
adb reboot bootloader # fastboot
The flashing procedure:​* Flash boot, vendor_boot, dtbo and recovery by executing the following in Windows Terminal:
Code:
fastboot flash boot lineage-19.1-20220618-UNOFFICIAL-cupid-boot.img
fastboot flash vendor_boot lineage-19.1-20220618-UNOFFICIAL-cupid-vendor_boot.img
fastboot flash dtbo lineage-19.1-20220618-UNOFFICIAL-cupid-dtbo.img
fastboot flash recovery lineage-19.1-20220618-UNOFFICIAL-cupid-recovery.img
* Finally execute the following, or reboot to recovery by holding VOLUME UP and POWER buttons until you see Mi logo on your device's screen:
Code:
fastboot reboot recovery # or bootloader
* If you get MIUI recovery, reboot back to fastboot, you should hopefully get LOS fastbootd now and be able to redo the steps and get LOS recovery next
Sideload the ROM from LOS recovery:​* ALL DATA WILL BE ERASED WITH THE NEXT STEP
* Go to Factory reset and perform Format data / Factory reset
* Go to Apply update, followed by Apply from ADB
* Execute the following Windows Terminal:
Code:
adb sideload lineage-19.1-20220810-UNOFFICIAL-GMS-cupid.zip
* Reboot your device
Rooting:​* Follow this thread but use the latest boot.img you downloaded earlier instead of the one from stock ROM.
Certification:​* If you won't fake the build prop to get certified status, you should at least follow Alphabet's instructions to make sure your device does not potentially get blacklisted from Play services
* Certification is required to run some apps - i.e. Netflix, Revolut, ...
* You can view certification state in Play store -> Profile -> Settings -> About -> Play Protect certification. This will cache the status. For a while, how to force the check again is shown down below
* Your device will not be certified on this ROM because it does not attempt to fake build props
* To get known good props for security update date and device fingerprint, you need either a rooted device with MIUI you want to extract the values from by executing the following in root adb shell:
Code:
grep -e fingerprint -e security_patch /system/build.prop
Or you can download latest recovery .zip from the download thread and open the file located in it from /META-INF/com/android/metadata in the archive
* Here's an example of the two values needed for my EEA device I got from the recovery zip:
Code:
2022-07-01
Xiaomi/cupid_eea/cupid:12/SKQ1.211006.001/V13.0.19.0.SLCEUXM:user/release-keys
* Install the following module through Magisk https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf
* Run the following:
Code:
adb shell
su
props
1 # Set the fingerprint to the one you obtained
5 # Add a custom prop with the name ro.build.version.security_patch, it should already exist, but it is most likely wrong
* Install the following module through Magisk
Releases · kdrag0n/safetynet-fix
Google SafetyNet attestation workarounds for Magisk - kdrag0n/safetynet-fix
github.com
* After the final reboot, remove storage of "Google Play Store" app to refresh the cache manually, open Play store and check the status, you should be in the green now
Known issues:​* Face recognition libraries are not included due to legal reasons, if one is interested in adding them, see the discussion starting here
* Minimum brightness is too bright. This can be mitigated by adding the "Extra Dim" card in the notification menu and long-pressing it to configure your desired intensity.
* When Smooth Display (120Hz) is enabled, screen flashes/redraws when it changes to and from 90Hz. This is more noticeable with lower brightness and no light in the room, and not really noticeable in daylight. Can be triggered by opening settings and typing a word and waiting half a second.
* Netflix(and only Netflix) is not available from the Play store on GSM ROM even with certification. Netflix provides an APK on their website, but that still gives me an unsupported device message. https://help.netflix.com/en/node/57688
Click to expand...
Click to collapse
Thanks @C0rn3j for the banger guide , and thanks @ArianK16a for the ROM, feels awesome to ditch this absolute cancer that is MIUI !
Performance and battery life is much better on LOS, a few features are missing but I guess we'll get them in a few weeks/months.
Much love ❣

Installed it two weeks ago, no root
- Camera not working but fixed after OTA update
- SMS issue (can send but cannot receive), fixed with firmware update
- missing calls (phone never rings...) applied firmware update, still testing
- Battery drain very high - fixed with disabling AOD (or at a glance...)
- Tethering (wifi and USB) not working, phone UI freezes
- Still having issues with Auto-brightness

Marmalux said:
Installed it two weeks ago, no root
- Camera not working but fixed after OTA update
- SMS issue (can send but cannot receive), fixed with firmware update
- missing calls (phone never rings...) applied firmware update, still testing
- Battery drain very high - fixed with disabling AOD (or at a glance...)
- Tethering (wifi and USB) not working, phone UI freezes
- Still having issues with Auto-brightness
Click to expand...
Click to collapse
Hotspot Is not working and the dev Is not working on It for now. It Is a big issue in my opinion. Have you try to get gpay working?

Hi
Since i have done the OTA i`m very cautious on what kernel to patch, i did not had time to check and double check.
But once i will root i will install the Magisk props and emulate a proper fingerprint, that should do the trick (it worked on my Xperia 5)

probably a stupid question but:
is faking a fingerprint possible without magisk, for example by editing a with adb pulled build.prop?

So wallet not working and hotspot not working?

Are things like fingerprint working with this? Pretty sad how small the custom rom community for this device is. Great phone but really sucks with MIUI. Hoping to flash this when i have time.

fingerprint works like a charm

Shane Gooseman said:
fingerprint works like a charm
Click to expand...
Click to collapse
Nice to know! are there any special features that wont work with this rom? like wireless charging, or reverse charging etc?

Gpay works, hotspot works, for me it Is ok!

hey is it good for a daily driver? any issues? I'm talking about the LOS 20 I see in the github