Database Info

[MOD][BETA] Advanced Reboot Menu for Tab 3 10.1

Hey folks,
I tried to modify Tab 3 10.1 Wifi Frameworks to natively enable Advanced Reboot Menu
WARNING:
- This hasn't been tested => I don't own a Tab 3 10.1
- This is a very earlier build => It may simply break your tablet or may not work
- This is a ported feature from an ARM CPU to ax86 CPU => It may just freeze your tablet every reboot :silly:
Do you accept all these conditions ?
If yes
Download the file from Mega.co.nz (290Kb)
Reboot to Recovery
Flash It
Reboot,
Long press power button and see if it works.
else,
Do nothing

Tested in my tab, but when I tried to flash the zip with TWRP an error flashing occurred! So for now it's a fail. Sorry.
Sent from my GT-P5210 using XDA Free mobile app

jdeocares said:
Tested in my tab, but when I tried to flash the zip with TWRP an error flashing occurred! So for now it's a fail. Sorry.
Sent from my GT-P5210 using XDA Free mobile app
Click to expand...
Click to collapse
Which kind of error ?

undetermined flashing error on TWRP md5 checsum its ok

@ Nonta72
I know I may sound s7up1d but what is "modify Tab 3 10.1 Wifi Frameworks" to natively enable "Advanced Reboot Menu"
What is the relation of "Wifi Frameworks" with "Advanced Reboot Menu"?
I bet you that is why you do not get reply. Another approach is like a Video or Picture of what you are trying to achieve. I have the same situation on my thread. But In my case I do not have anything to show yet. I am just testing various methods and had no real results. Good luck.

Carefully read OP before asking -_-
r2d23cpo said:
@ Nonta72
I know I may sound s7up1d but what is "modify Tab 3 10.1 Wifi Frameworks" to natively enable "Advanced Reboot Menu"
What is the relation of "Wifi Frameworks" with "Advanced Reboot Menu"?
Click to expand...
Click to collapse
I didn't say Wifi frameworks, I said Tab 3 10.1 Wifi (aka P5210) frameworks
I bet you that is why you do not get reply. Another approach is like a Video or Picture of what you are trying to achieve. I have the same situation on my thread. But In my case I do not have anything to show yet. I am just testing various methods and had no real results. Good luck.
Click to expand...
Click to collapse
Please OP again, I don't have screenshots cause I don't have the Tab.
I'm leaving this forum forever, No Developper, No Tester, No one who care, at all.

Nonta72 said:
I didn't say Wifi frameworks, I said Tab 3 10.1 Wifi (aka P5210) frameworks .
Click to expand...
Click to collapse
Upss, I ask for forgiveness.
Nonta72 said:
Please OP again, I don't have screenshots cause I don't have the Tab.
I'm leaving this forum forever, No Developper, No Tester, No one who care, at all.
Click to expand...
Click to collapse
I am sorry you feel that way. And yes I TOTALY understand, "No one who care". Just because they all are selling this TAB3 10.1 x86. No it is Not because of it. It is a nice and acceptable device. It is just because everyone sooner or latter got tire of not able to do Mods. Source is incomplete and to many proprietary drivers. SAMSUNG, INTEL & GOOGLE please read this fact and learn for the future.
I hope to see you around.

r2d23cpo said:
Upss, I ask for forgiveness.
I am sorry you feel that way. And yes I TOTALY understand, "No one who care". Just because they all are selling this TAB3 10.1 x86. No it is Not because of it. It is a nice and acceptable device. It is just because everyone sooner or latter got tire of not able to do Mods. Source is incomplete and to many proprietary drivers. SAMSUNG, INTEL & GOOGLE please read this fact and learn for the future.
I hope to see you around.
Click to expand...
Click to collapse
I cooked AmatROM v2.0 3 months ago, but no one to test it and I don't have the device.
So I think we can leave this forum as it's now.

Come on guys be nice with the man!
Sent from my GT-P5210 using XDA Free mobile app
---------- Post added at 01:33 PM ---------- Previous post was at 01:07 PM ----------
Here a picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

jdeocares said:
Come on guys be nice with the man!
Sent from my GT-P5210 using XDA Free mobile app
---------- Post added at 01:33 PM ---------- Previous post was at 01:07 PM ----------
Here a picture
Click to expand...
Click to collapse
Did you tried flashing it using CWM instead of TWRP ?

Nop, give me a few days please, I have the night shift at work, Saturday I think is the day! I will be flashing CWM recovery & your mode! Sorry.

jdeocares said:
Nop, give me a few days please, I have the night shift at work, Saturday I think is the day! I will be flashing CWM recovery & your mode! Sorry.
Click to expand...
Click to collapse
No problem dude...Take your time

jdeocares said:
Come on guys be nice with the man!...
Click to expand...
Click to collapse
jdeocares hi I guess it is first time we chat. I do not think I was rude with him. First my English as a second language made me read wrong message. I ask my apologies to him. Then he express there is nobody left to test. I totally agree with him.
Regards this project, I do not see what he is trying to accomplish, What is this "Advanced Reboot Menu for Tab 3 10.1". I ask him for and explanation and suggested he post a more graphic method of what he is trying to accomplish.
So the only I could do was to opened the package to get a glips of his work. And found all is store in a "android.policy.jar" that I can not look at. I see his work is base in 4.4.2 KK and I have 4.2.2. So without more explanation or a reason as why I want to pass all the work to backup and install KK, I left.
Nonta72
Like I said I do not see a gain for me. Now without installing I look again inside your zip file. I can only imagine that you are using the wrong "update-binary", my best guess is that that one is for ARM!. Just a guest. I say this because it size is 168kb. The size of that binary usually is around 521kb!!
So try this one.
Here you have a friend. Keep the good work.
Note: Can I see the source of that "android.policy.jar".

r2d23cpo said:
jdeocares hi I guess it is first time we chat. I do not think I was rude with him. First my English as a second language made me read wrong message. I ask my apologies to him. Then he express there is nobody left to test. I totally agree with him.
Regards this project, I do not see what he is trying to accomplish, What is this "Advanced Reboot Menu for Tab 3 10.1". I ask him for and explanation and suggested he post a more graphic method of what he is trying to accomplish.
So the only I could do was to opened the package to get a glips of his work. And found all is store in a "android.policy.jar" that I can not look at. I see his work is base in 4.4.2 KK and I have 4.2.2. So without more explanation or a reason as why I want to pass all the work to backup and install KK, I left.
Nonta72
Like I said I do not see a gain for me. Now without installing I look again inside your zip file. I can only imagine that you are using the wrong "update-binary", my best guess is that that one is for ARM!. Just a guest. I say this because it size is 168kb. The size of that binary usually is around 521kb!!
So try this one.
Here you have a friend. Keep the good work.
Note: Can I see the source of that "android.policy.jar".
Click to expand...
Click to collapse
Thank you.
You're right, I used an ARM update-binary sorry
You're also right, It's for Android 4.4.2.
About the source of the .jar files; well, I downloaded Tab 3 10.1 KK Firmware from SamMobile.com then deodexed it. Now I'm trying to mod its frameworks without even having the tab on hand!
> Note: I can try to mod JB 4.2.2 frameworks if you're interested in testing.

No problem guys It was a misunderstood, all friends.

Dolby Atmos in Oreo & Beta easter egg

Hi,
As I noticed right after installing Oreo, there is no Dolby settings. I assume that this is a matter of license and certification Dolby for Oreo.
But I checked the system and this is what I found:
- /dsp partition is present:
Code:
ls /dsp
AlacDecoderModule.so.1 EtsiAmrWbPlusDecModule.so.1 VorbisDecoderModule.so.1 libsysmon_skel.so
ApeDecoderModule.so.1 EtsiEaacPlusEncAndCmnModule.so.1 WmaProDecoderModule.so.1 lost+found
AudioSphereModule.so.1 FlacDecoderModule.so.1 WmaStdDecoderModule.so.1 map_SHARED_LIBS_AAAAAAAAQ.txt
DTS_HPX_MODULE.so.1 HeaacDecoderModule.so.1 fastrpc_shell_0 map_avs_shared_libs.txt
DolbyMobileModule.so.1 SAPlusCmnModule.so.1 fluence_voiceplus_module.so.1 mmecns_module.so.1
DolbySurroundModule.so.1 SrsTruMediaModule.so.1 libFastRPC_UTF_Forward_skel.so
- getprop reports
Code:
[vendor.audio.dolby.ds2.enabled]: [false]
[vendor.audio.dolby.ds2.hardbypass]: [false]
Can someone with Nougat check the value? adb shell getprop vendor.audio.dolby.ds2.enabled in adb on pc or getprop vendor.audio.dolby.ds2.enabled in Terminal Emulator.
I'm just wondering if I solve this well.

minik971 said:
Hi,
As I noticed right after installing Oreo, there is no Dolby settings. I assume that this is a matter of license and certification Dolby for Oreo.
But I checked the system and this is what I found:
- /dsp partition is present:
Code:
ls /dsp
AlacDecoderModule.so.1 EtsiAmrWbPlusDecModule.so.1 VorbisDecoderModule.so.1 libsysmon_skel.so
ApeDecoderModule.so.1 EtsiEaacPlusEncAndCmnModule.so.1 WmaProDecoderModule.so.1 lost+found
AudioSphereModule.so.1 FlacDecoderModule.so.1 WmaStdDecoderModule.so.1 map_SHARED_LIBS_AAAAAAAAQ.txt
DTS_HPX_MODULE.so.1 HeaacDecoderModule.so.1 fastrpc_shell_0 map_avs_shared_libs.txt
DolbyMobileModule.so.1 SAPlusCmnModule.so.1 fluence_voiceplus_module.so.1 mmecns_module.so.1
DolbySurroundModule.so.1 SrsTruMediaModule.so.1 libFastRPC_UTF_Forward_skel.so
- getprop reports
Code:
[vendor.audio.dolby.ds2.enabled]: [false]
[vendor.audio.dolby.ds2.hardbypass]: [false]
Can someone with Nougat check the value? adb shell getprop vendor.audio.dolby.ds2.enabled in adb on pc or getprop vendor.audio.dolby.ds2.enabled in Terminal Emulator.
I'm just wondering if I solve this well.
And a weird easter egg I found in /system/etc
https://www.youtube.com/watch?v=AMVBv1zW6vE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Here you go :
TA-1021 with December security patch running Android 7.1.2
[audio.dolby.ds2.enabled]: [true]
[audio.dolby.ds2.hardbypass]: [true]
---------- Post added at 07:04 AM ---------- Previous post was at 06:51 AM ----------
Even many Oreo custom ROMs don't support Dolby Atmos yet.
update :
https://mobile.twitter.com/sarvikas/status/946210494901301248

Thanks for your reply.
So as I thought it's about Dolby certification.

minik971 said:
Hi,
As I noticed right after installing Oreo, there is no Dolby settings. I assume that this is a matter of license and certification Dolby for Oreo.
But I checked the system and this is what I found:
- /dsp partition is present:
- getprop reports
Can someone with Nougat check the value? adb shell getprop vendor.audio.dolby.ds2.enabled in adb on pc or getprop vendor.audio.dolby.ds2.enabled in Terminal Emulator.
I'm just wondering if I solve this well.
And a weird easter egg I found in /system/etc
Click to expand...
Click to collapse
How did u get the LTE in ur internet data, as we get 4g u can see in my picture

Akilesh T said:
Here you go :
TA-1021 with December security patch running Android 7.1.2
[audio.dolby.ds2.enabled]: [true]
[audio.dolby.ds2.hardbypass]: [true]
---------- Post added at 07:04 AM ---------- Previous post was at 06:51 AM ----------
Even many Oreo custom ROMs don't support Dolby Atmos yet.
Click to expand...
Click to collapse
sltushar said:
How did u get the LTE in ur internet data, as we get 4g u can see in my picture
Click to expand...
Click to collapse
Do you use Oreo? I don't pay attention to that tbh
It was like that for me also on Nougat - checked some screenshoot. Now I'm using Substratum and you can change it, but for me it's by default.

I didn't rooted my phone yet cause m using it fine in my way, and yes i m using oreo, but still everyone's has 4g and your is LTE...
Its so hurting :crying:

sltushar said:
I didn't rooted my phone yet cause m using it fine in my way, and yes i m using oreo, but still everyone's has 4g and your is LTE...
Its so hurting :crying:
Click to expand...
Click to collapse
How do you know everyone? I see you have Dual SIM - try it with single card, I don't know, maybe it changes something. Second thing may be network carrier, for me it's T-Mobile. Look this thread.
BTW, I don't have root. Substratum with Andromeda works rootless.
↓ PM

Can u share the link i also want to use it

sltushar said:
I didn't rooted my phone yet cause m using it fine in my way, and yes i m using oreo, but still everyone's has 4g and your is LTE...
Its so hurting :crying:
Click to expand...
Click to collapse
the 4G/LTE this is probably because the phones that were purchased in USA (like mine, TA-1025) will get LTE because in the US they usually brand their networks as LTE and 4G is not really a commonly used term.
but anyway, when I was on nougat I used to get mostly 4G (lte only sometimes, but rarely) now I only get LTE.

emijomo89 said:
the 4G/LTE this is probably because the phones that were purchased in USA (like mine, TA-1025) will get LTE because in the US they usually brand their networks as LTE and 4G is not really a commonly used term.
but anyway, when I was on nougat I used to get mostly 4G (lte only sometimes, but rarely) now I only get LTE.
Click to expand...
Click to collapse
I got it, this depends on the carrier we use in our region so its fine, lator when some custom rom will be available then i iwll manage that via root..

Maybe they'll add this at release of Oreo?

ZeroPointMax said:
Maybe they'll add this at release of Oreo?
Click to expand...
Click to collapse
Yup, it's actually confirmed right now

minik971 said:
Yup, it's actually confirmed right now
Click to expand...
Click to collapse
nice :good:
Now we only have to see if A.R.I.S.E. works

sltushar said:
I got it, this depends on the carrier we use in our region so its fine, lator when some custom rom will be available then i iwll manage that via root..
Click to expand...
Click to collapse
TA-1025 will not get ROMs. Locked bootloader.

Moody66 said:
TA-1025 will not get ROMs. Locked bootloader.
Click to expand...
Click to collapse
Right now every varient of Nokia's phone are locked, we need to keep calm and wait for someone get the official or unofficial tool to unlock bootloader..

sltushar said:
Right now every varient of Nokia's phone are locked, we need to keep calm and wait for someone get the official or unofficial tool to unlock bootloader..
Click to expand...
Click to collapse
The Amazon version will NEVER be unlocked. Same as every Amazon device. No way around it. Some are not going t be allowed regardless of make of the device. ATT Note 4 for instance. Or amazon Fire HD10 etc

Moody66 said:
The Amazon version will NEVER be unlocked. Same as every Amazon device. No way around it. Some are not going t be allowed regardless of make of the device. ATT Note 4 for instance. Or amazon Fire HD10 etc
Click to expand...
Click to collapse
Man, we live in a world of technology, before making any security, people make a unlocking way to get rid during any problem with security
If TA-1000 and TA-1003 can be flashed with mena firmware then there is still hope available to get our phone unlocked
Dont worry just be calm and relax...you, me or someone will surely make a way to get our device unlocked...
Till stay happy and enjoy what you have
Hit thanks button if you find this helpful
Happy flashing

sltushar said:
Man, we live in a world of technology, before making any security, people make a unlocking way to get rid during any problem with security
If TA-1000 and TA-1003 can be flashed with mena firmware then there is still hope available to get our phone unlocked
Dont worry just be calm and relax...you, me or someone will surely make a way to get our device unlocked...
Till stay happy and enjoy what you have
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
You obviously didnt bother reading up. Some devices are locked and have never been unlocked. Not everything is possible. Having compiled roms myself i am more than aware of security flaws. SOME however have never been exploited. Google has some of the best Devs in the wold. As well as the help of the Android community aiding in making secure device. I suggest you read up on bootloaders. As well as the new security added under Nougat and Oreo. It may help you understand.

Moody66 said:
You obviously didnt bother reading up. Some devices are locked and have never been unlocked. Not everything is possible. Having compiled roms myself i am more than aware of security flaws. SOME however have never been exploited. Google has some of the best Devs in the wold. As well as the help of the Android community aiding in making secure device. I suggest you read up on bootloaders. As well as the new security added under Nougat and Oreo. It may help you understand.
Click to expand...
Click to collapse
Sure, i will read them
Thank you for your advice
I really appreciate it

Please can someone, upload all system/etc/mixer_paths.xml files from stock nougat rom, thanks in advance.

closed

closed​

abun880007 said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supported Devices
Samsung Galaxy Tab S6 WiFi - T860 (gts6lwifi)
Samsung Galaxy Tab S6 4G - T860 (gts6l)​
Click to expand...
Click to collapse
Are you sure with
Samsung Galaxy Tab S6 4G - T860 (gts6l)?
mine (4G) ist SM-T865​

Tronje said:
Are you sure with
Samsung Galaxy Tab S6 4G - T860 (gts6l)?
mine (4G) ist SM-T865
Click to expand...
Click to collapse
sorry you are right was a typo

I don't understand why you would need to be on android 10 for a recovery when the recovery is based off TWRP that works on android 9 and 10? I don't get it.

Techguy777 said:
I don't understand why you would need to be on android 10 for a recovery when the recovery is based off TWRP that works on android 9 and 10? I don't get it.
Click to expand...
Click to collapse
It is built with and Android 10 Kernel base so you might get issues with Android 9

Updated to work with BTF2 Tab base

abun880007 said:
It is built with and Android 10 Kernel base so you might get issues with Android 9
Click to expand...
Click to collapse
I'm not going to lie SHRP 2.3 is awesome on my S7. You have magisk manager options inside recovery, themes look nice and new, you have the camera api 2, fingerprint clear options, it really has just about everything. I still think it would be great to allow internet and a web browser I dont know how that would be possible but I could see it. I hope there is a working permissive kernel for android 10 soon.

The best recovery I have ever seen so far !!!
EDIT
Just one request if possible...in file manager there is no function to select multiple files, so if it is possible to add check boxes for multiple selection.

Anyone else unable to mount system with the YouTube vanced installer? I get an error 1.
I have tried turning off the unmount system in the settings.

Timoxa said:
Anyone else unable to mount system with the YouTube vanced installer? I get an error 1.
I have tried turning off the unmount system in the settings.
Click to expand...
Click to collapse
Well I hate to do this to someone but maybe try TWRP 3.4 that the other developer just made. It's only because the system problems with TWRP 3.3.1 based and Android 10 I'm telling you to try 3.4. So sorry devs know it's kinda crappy to say something in your thread but I believe it's only fair because android 10 doesn't play well with TWRP at the moment. Hopefully the next update by Dee's Troy will be the finally fix to the super partition or dynamic partition as they call it.
---------- Post added at 10:08 PM ---------- Previous post was at 10:01 PM ----------
In all honesty I would bet the devs of this recovery are actually using 3.4 if they already knew about it or if they just found out from me they will switch for now. The nasty part of development is a lot of developers don't use their own updates so that's how you have someone put out a new kernel or ROM thinking it works and everyone says no it's a bootloop. Because they are using some other devs kernel or something that works better and they didn't feel like switching because the ROM, kernel, and TWRP that work the best will be the most popular threads basically.

Techguy777 said:
Well I hate to do this to someone but maybe try TWRP 3.4 that the other developer just made. It's only because the system problems with TWRP 3.3.1 based and Android 10 I'm telling you to try 3.4. So sorry devs know it's kinda crappy to say something in your thread but I believe it's only fair because android 10 doesn't play well with TWRP at the moment. Hopefully the next update by Dee's Troy will be the finally fix to the super partition or dynamic partition as they call it.
---------- Post added at 10:08 PM ---------- Previous post was at 10:01 PM ----------
In all honesty I would bet the devs of this recovery are actually using 3.4 if they already knew about it or if they just found out from me they will switch for now. The nasty part of development is a lot of developers don't use their own updates so that's how you have someone put out a new kernel or ROM thinking it works and everyone says no it's a bootloop. Because they are using some other devs kernel or something that works better and they didn't feel like switching because the ROM, kernel, and TWRP that work the best will be the most popular threads basically.
Click to expand...
Click to collapse
This looks to be a YT Vanced issue, I suspect the Magisk module has not been updated.
For anyone hitting this error, just install Vanced youtube with SAI, easy as pie!

Timoxa said:
This looks to be a YT Vanced issue, I suspect the Magisk module has not been updated.
For anyone hitting this error, just install Vanced youtube with SAI, easy as pie!
Click to expand...
Click to collapse
Yeah that's fine that's how I do it. However it doesn't change the fact that right now on Android 10 you should be on TWRP 3.4 as it correct some of the errors in android 10. Hopefully in a week or 2 they will finish TWRP to work 100 percent with the new super partition and a/b setup. I actually looked up super partitions and actually it make sense because it would allow you to make use of all the space on internal because things can take up what they need to and not extra. Don't get me wrong this recovery updated to TWRP 3.4 source would be better yet but still.

Hello~
I couldn't find anything in the BUA1 folder. (GDrive)
Is there anything wrong?
Also, BTK2 folder has data. It's the old version, but...
there is no T860 folder in SForge.

coey0814 said:
Hello~
I couldn't find anything in the BUA1 folder. (GDrive)
Is there anything wrong?
Also, BTK2 folder has data. It's the old version, but...
there is no T860 folder in SForge.
Click to expand...
Click to collapse
Sorry my fault the files are now in the release folder

abun880007 said:
Sorry my fault the files are now in the release folder
Click to expand...
Click to collapse
Thank you very much for responding quickly!
Always thank you for your hard work.
But,,, sorry to bother you,
It looks like the same file has been uploaded to BTK2 folder & BUA1 folder, is this normal?
The hash values are the same,
Please check once.

coey0814 said:
Thank you very much for responding quickly!
Always thank you for your hard work.
But,,, sorry to bother you,
It looks like the same file has been uploaded to BTK2 folder & BUA1 folder, is this normal?
The hash values are the same,
Please check once.
Click to expand...
Click to collapse
Thats not normal, might be GDrive mucking up I will remove and reupload

please close this thread

abun880007 said:
please close this thread
Click to expand...
Click to collapse
Thread closed per OP request.

!DISCONTINUED! TeamWin Recovery Project [EMUI 8/9]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
------------------------------------------------------------------------------------------------------------------------------------------
Working:
* Touchscreen
* Adb
* Backup
* Wipe
* File manager
-------------------------------------------------------------
Not working:
You have to tell me, I'm busy for now. Thanks.
Download here: https://drive.google.com/file/d/1pMiIeKGAgyBd73iLDf_qRv0He8c8PFiq/view?usp=sharing
Note that this is my first project, so any tip or bug report will be appreciated! ​
XDAevDB Information
TWRP 3.4.0-0 [UNOFFICIAL], Tool/Utility for the Huawei P20 Lite
READ THIS SHORT NOTE!
======================
This TWRP is DISCONTINUED, but you can use it anyway, if you need to
Contributors
Tails, A2L5E0X1
-----------------------------
Version Information
Status: Testing
Created 2020-11-20
Last Updated 2020-11-22

Tails said:
Working:
* Touchscreen
* Adb
* Backup
* Wipe
* File manager
Not working:
You tell me​Note that this is my first project, so any tip or bug report will be appreciated!:good:
Huge thanks go to A2L5E0X1, who helped me building this TWRP!
Download link: https://drive.google.com/file/d/1pMiIeKGAgyBd73iLDf_qRv0He8c8PFiq/view?usp=sharing
XDA:DevDB Information
TWRP 3.4.0-0 [UNOFFICIAL], Tool/Utility for the Huawei P20 Lite
Contributors
A2L5E0X1
Tails
Version Information
Status: Testing
Created 2020-11-20
Last Updated 2020-11-20
Click to expand...
Click to collapse
The "install image" button doesn't allow you to flash TWRP over eRecovery_ramdisk, which is quite important if you want to root device on EMUI 9.1 .
What is the difference between the official 3.4.0.0 TWRP version and yours, if I may ask?

-Alf- said:
The "install image" button doesn't allow you to flash TWRP over eRecovery_ramdisk, which is quite important if you want to root device on EMUI 9.1 .
What is the difference between the official 3.4.0.0 TWRP version and yours, if I may ask?
Click to expand...
Click to collapse
Hi,
Many custom recoveries doesn't let you do it, but i remember you that i could add this option in the future, to make the recovery better.
I've decided to share this TWRP, because i want to start development on Anne. This was my first project, and I want to continue, so I'd want to share with the community all my projects, starting from now.:highfive:

Tails said:
i want to start development on Anne
Click to expand...
Click to collapse
using method copy-paste?
https://forum.xda-developers.com/huawei-p20-lite/development/recovery-twrp-huawei-p20-lite-t4150389

-Alf- said:
using method copy-paste?
https://forum.xda-developers.com/huawei-p20-lite/development/recovery-twrp-huawei-p20-lite-t4150389
Click to expand...
Click to collapse
Hi,
I want to say that i cloned that TWRP' sources, cause there aren't alternatives. And, this is my first work, so....
The first times you build, it's normal to do something wrong, or to make something based on another work. And after all, i know the developer who built Official TWRP and i can message with him, so you can understand that if he wants to talk with me about this, he can do it

Tails said:
Hi,
I want to say that i cloned that TWRP' sources, cause there aren't alternatives. And, this is my first work, so....
The first times you build, it's normal to do something wrong, or to make something based on another work. And after all, i know the developer who built Official TWRP and i can talk with him, so you can understand that if he has to talk with me, he will do it
Click to expand...
Click to collapse
Nice job
You could ask DarkJoker for suggestions since it stopped the development you could continue it with your effort

Dego02 said:
Nice job
You could ask DarkJoker for suggestions since it stopped the development you could continue it with your effort
Click to expand...
Click to collapse
Hi,
Thanks for the support,
I will ask to him that: I'd want to become a developer like him.
Yeah, the road to the success will be long, but I can't wait to start a new development!
This is one my favourites hobbies, so, I hope to start developing a new project soon!:fingers-crossed:

Dego02 said:
Nice job
You could ask DarkJoker for suggestions since it stopped the development you could continue it with your effort
Click to expand...
Click to collapse
Another thing before i forget:
tomorrow, or at least this week, i will release a custom kernel for EMUI 9/9.1
Cheers!

My p 20 lite is sd card is broken. in one says lineage os 17.1 unsupported sd card. I can't format at all, the computer gives an error.

Tails said:
Hi,
Thanks for the support,
I will ask to him that: I'd want to become a developer like him.
Yeah, the road to the success will be long, but I can't wait to start a new development!
This is one my favourites hobbies, so, I hope to start developing a new project soon!:fingers-crossed:
Click to expand...
Click to collapse
First of all let me say that it is nice to see developers trying their best to bring support for our devices...Kudos to you.
If you want to continue development in a custom rom for P20 Lite I have an: ANE-LX1 9.1.0.200(C432E6R1P7), bootloader unlocked and TWRP installed. If you want to develop Android 11 for this device I can help you test it. Thanks.

technodeha said:
My p 20 lite is sd card is broken. in one says lineage os 17.1 unsupported sd card. I can't format at all, the computer gives an error.
Click to expand...
Click to collapse
Try switching ROM.

FL0R1AN said:
First of all let me say that it is nice to see developers trying their best to bring support for our devices...Kudos to you.
If you want to continue development in a custom rom for P20 Lite I have an: ANE-LX1 9.1.0.200(C432E6R1P7), bootloader unlocked and TWRP installed. If you want to develop Android 11 for this device I can help you test it. Thanks.
Click to expand...
Click to collapse
Well,
I'd want one day to make a custom ROM, but i have to say that i don't know if my PC can handle a ROM building.
For now, let's try to make this TWRP better, adding for example more options to choose when flashing an IMG file, or more partitions to choose between, when doing a backup.
And, as I said before, i'm not a developer yet, for now, the things I do and publish, are only for testing.
But i want to become a developer.
Let's see what future deserves for me.
And one last thing: developing for hi6250 isn't too bad, for a start. What do you think about this?
Cheers

technodeha said:
My p 20 lite is sd card is broken. in one says lineage os 17.1 unsupported sd card. I can't format at all, the computer gives an error.
Click to expand...
Click to collapse
Maybe im wrong but it looks like your card is configured as adoptable storage ( in LOS settings). Have you tried format it in your phone? Running LOS?

Tails said:
Another thing before i forget:
tomorrow, or at least this week, i will release a custom kernel for EMUI 9/9.1
Cheers!
Click to expand...
Click to collapse
Great, I'm already writing to you on Telegram

-Alf- said:
Maybe im wrong but it looks like your card is configured as adoptable storage ( in LOS settings). Have you tried format it in your phone? Running LOS?
Click to expand...
Click to collapse
Working lineage os 17.1 where is lineage os los settings.
---------- Post added at 09:45 AM ---------- Previous post was at 09:42 AM ----------
Tails said:
Try switching ROM.
Click to expand...
Click to collapse
which ROM is better suggest which one

technodeha said:
Working lineage os 17.1 where is lineage os los settings.
---------- Post added at 09:45 AM ---------- Previous post was at 09:42 AM ----------
which ROM is better suggest which one
Click to expand...
Click to collapse
Hi
I suggest you to install CrDroid ROM, based on Android Pie, you will get a lag-free experience, and an interface like LineageOS one, but with nice custom settings to customize your phone how do you want and you like.
Bye!

Dego02 said:
Great, I'm already writing to you on Telegram
Click to expand...
Click to collapse
Hi, I will reply to you as soon as possible!

Tails said:
Hi
I suggest you to install CrDroid ROM, based on Android Pie, you will get a lag-free experience, and an interface like LineageOS one, but with nice custom settings to customize your phone how do you want and you like.
Bye!
Click to expand...
Click to collapse
Can we install colt os or openkirin as android 10 P20 lite well

technodeha said:
Can we install colt os or openkirin as android 10 P20 lite well
Click to expand...
Click to collapse
Yes, you can, if you want.
Good luck

Tails said:
Yes, you can, if you want.
Good luck
Click to expand...
Click to collapse
Thanks

SM-T867U ROM

Disclaimer:
Your warranty is now void.
I am not responsible if you use this and brick your device or if your device blows up, implodes. Follow the instructions and you should be good.
This is stock ROM with modifications.
You must have an Unlocked Boot loader.
ALWAYS BACKUP YOU’RE DATA BEFORE FLASHING.
Instructions:
• Download the zip file.
• Put the ROM.tar in AP slot with Odin.
• Reboot
• Wipe data
• Enjoy!
• Any Issues let me know!
ROM FEATURES:
- Force Encryption Off
- 90 plus fonts
- 3 Minit Battery and Clock Added
- Circle Battery
- Network Speed Options
- Few others
- Heavily Debloated
- Bluetooth, Screenshare and Shealth working.
- Disable shutter sound menu
- AppLock Protection menu
- Support RealTime Network Speed
- Enable Camera during call
- Voicecall recording
- Data usage view on quick panel
- Block call number menu
Telegram BKLYNROM
BKLYN Kernel source >> Link
To get your phone unlocked see this thread or @afaneh92 Unlock
TWRP included in the zip file Thanks to @afaneh92
Donations are not required but are encouraging, If want to support my work just click Here

Changelog
06/26/2022 BKLYN_TABS6_ROM_A12_V_1.0.0
Download Link >> BKLYN_TABS6_ROM_A12_V_1.0.0
Based on T867USQU7DVE2
No Custom Kernel yet waiting for source code.
Factory Reset will be needed so backup data.
10/04/2021 BKLYN_TABS6_ROM_V_2.0.4
Download Link >> BKLYN_TABS6_ROM_V_2.0.4
Based on T867USQS5CUG1

Reserved

Thanks

chochoking said:
Thanks
Click to expand...
Click to collapse
Anytime

timono said:
""This is stock ROM with modifications"
Just to be sure is not base on lineage OS right?
Click to expand...
Click to collapse
timono said:
""This is stock ROM with modifications"
Just to be sure is not base on lineage OS right?
Click to expand...
Click to collapse
No just stock

ROM 2.0 Uploaded let me know if any issues.

It's been a while folks.
But is this for and can i root my T-mobile T867u Tab S6?

dovedescent7 said:
It's been a while folks.
But is this for and can i root my T-mobile T867u Tab S6?
Click to expand...
Click to collapse
Yes. You have to unlock your bootloader first prior to rooting but you'll have to pay to have your bootloader unlocked since it's T-mo branded. Here's a link to the forum explaining it:
https://forum.xda-developers.com/t/...unlock-for-samsung-us-canada-devices.4215101/
Edit: link was broken. Fixed

07/05/21 BKLYN_TABS6_ROM_V_2.0.3 enjoy

Zyker019 said:
Yes. You have to unlock your bootloader first prior to rooting but you'll have to pay to have your bootloader unlocked since it's T-mo branded. Here's a link to the forum explaining it:
https://forum.xda-developers.com/t/...unlock-for-samsung-us-canada-devices.4215101/
Edit: link was broken. Fixed
Click to expand...
Click to collapse
Let me preface my response with: This is JUST MY OPINION: Just my thoughts/feelings on this
But I wish the Title of this thread stated all the "fyi" stuff. Like if the thread were labeled:
"ROM for T867U when you pay 100-200 for some random dude to "root" your tab, then you can install this Stock Rom with some mods"

dovedescent7 said:
Let me preface my response with: This is JUST MY OPINION: Just my thoughts/feelings on this
But I wish the Title of this thread stated all the "fyi" stuff. Like if the thread were labeled:
"ROM for T867U when you pay 100-200 for some random dude to "root" your tab, then you can install this Stock Rom with some mods"
Click to expand...
Click to collapse
A title isn't supposed to be a detailed description. This thread was created off the assumption/pre requisite that you already have an unlocked bootloader, hence the OP. You asked a question, so I provided an option to your dilemma. I did say in my previous post that you have to pay. If you are skeptical on paying for an unlock token, he is a reputable dev. XDA wouldn't just allow some random person to offer a service like this. And if this was false advertisement, the thread would have ceased to exist. And yes, it's quite unfortunate that we have to pay for our Snapdragon devices to be unlocked after all these years of relying on the hard work of devs to exploit, but it's better than being completely locked down. But you yourself can become the change you want to see and find an exploit if this irks you that much. If not, at least be grateful you have a possibility. But enough of this. I don't wish to hijack the thread

10/04/2021 BKLYN_TABS6_ROM_V_2.0.4
Download Link >> BKLYN_TABS6_ROM_V_2.0.4
Based on T867USQS5CUG1

Hello. I would like to try this stock ROM Based on T867USQS5CUG1
I have already swapped my firmware from T867V to T867U on boot loader version 5. I did not unlock the bootloader yet.
Seeing as this custom stock ROM is on the same boot loader version 5 would I be able to Flash it via Odin without unlocking the bootloader?
All the best.

Zyker019 said:
A title isn't supposed to be a detailed description. This thread was created off the assumption/pre requisite that you already have an unlocked bootloader, hence the OP. You asked a question, so I provided an option to your dilemma. I did say in my previous post that you have to pay. If you are skeptical on paying for an unlock token, he is a reputable dev. XDA wouldn't just allow some random person to offer a service like this. And if this was false advertisement, the thread would have ceased to exist. And yes, it's quite unfortunate that we have to pay for our Snapdragon devices to be unlocked after all these years of relying on the hard work of devs to exploit, but it's better than being completely locked down. But you yourself can become the change you want to see and find an exploit if this irks you that much. If not, at least be grateful you have a possibility. But enough of this. I don't wish to hijack the thread
Click to expand...
Click to collapse
Amen brother! Preach it!

Note to the OP...
I see that there may be in incorrect reference to the fact that SAMPWND may NOT be offering the unlocked BL on their site for the T867U... at least none that I can see. I have put out a question to the dev on this.

megamb11 said:
Amen brother! Preach it!
Click to expand...
Click to collapse
Yeah this is bait n switch. NOT cool OP. Need to ask mods to rename title of thread stating only can root for $$$.

06/26/2022 BKLYN_TABS6_ROM_A12_V_1.0.0
Download Link >> BKLYN_TABS6_ROM_A12_V_1.0.0
Based on T867USQU7DVE2
No Custom Kernel yet waiting for source code.
Factory Reset will be needed so backup data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Any idea if this works on the regular 860 model?

Zyker019 said:
Yes. You have to unlock your bootloader first prior to rooting but you'll have to pay to have your bootloader unlocked since it's T-mo branded. Here's a link to the forum explaining it:
https://forum.xda-developers.com/t/...unlock-for-samsung-us-canada-devices.4215101/
Edit: link was broken. Fixed
Click to expand...
Click to collapse
Thanks for all your work on this. It's funny because there doesn't seem to be much work in this device and most searches bring up Tab S6 Lite.
I've flashed way back but since being on Pixels I hadn't seen any reason to.
T-Mobile locks suck but you suggested they're possible after unlocked BL, are you able to point me in the right direction for Sim unlock? The hardware is nice it's just a shame it's locked and has so much bloat.
Thanks again.