Related
Hi I am currently awaiting delivery for my DHD (and it could be a week or two).
I am wondering if anyone who owns a Silicone case - or something similar, and has found a case that allows for the phone to sit flat on a table surface to allow for one handed use. With the camera design set out from the main body I am hoping the case would come up to this level preventing rocking action.
Does the phone rock around on a table when used without a case or is it bearable?
I will then add a screen protector perhaps a Zagg product or similar.
Any ideas?
Cheers
Si
mine is currently cases-less, and does rock around when it on the table. however, placing a little phone sock under the phone is good at reducing the rocking, but i cant find one big enough to fit the phone in yet.
still looking for a good case, but it seems 3rd parties are being slow with this phone.
I'm needing a case or something like a bumper for my DHD.
I've had it 3 weeks and dropped it twice on to hard surfaces, got 2 small scratches and a small dent at the power button (since the button was flush with the case to start with, its actually made it a bit better!! LOL)
but my luck won't last too much longer so I need to protect it...
any ideas??
Sent from my Desire HD using XDA App
I was thinking of using a phone sock to help keep it protected, the problem is having to slide the phone out every time i want to use it, id end up just leaving it somewhere. But keeping it steady with one is a good idea - but overall I'm looking for something more protective, good looking and will prevent the rocking.
I'm normally quite good with not dropping my phones, but a bumper or silicone case would be a must with a screen this size...don't really want to scratch or dent it (even if it has its upsides ;D ).
I'll keep looking, the annoying thing is that all the silicone ones I have found only have front or back on photos, not from the side...which is obviously important to check the level in relation to the camera area.
Cheers
Si
Was browsing through Google products and found this new one on Play, looks really cool not as dull and uninspired as the average silicone protector. I don't know again if it will help the issue with the raised camera, but I am still really interested.
play.com/Mobiles/Mobile/4-/17123125/Exspect-HTC-Desire-HD-Tough-Silicone-Case-Black/Product.html?_$ja=tsid:11518|cc:|prd:17123125|cat:Mobile+#
I bought one of these and it does what it says on the tim. Protects the back and sides while offering unfettered access to the screen. It helps with the grip too, so I'm less likely to drop it (eek!)
Just so you know, the following case does have a slight wobble to it left and right when typing whilst on a flat surface. Not loads, but a wobble is there!
BLACK GEL PROTECTION CASE COVER SKIN FOR HTC DESIRE HD
http://forum.xda-developers.com/showthread.php?t=824377
here what i found while looking for the case and ended up with a very good one
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
Yeah it looks good, nice to know its tougher than silicone, but unless it solves the rocking issue - I still prefer the one I found on Play...just because its cool looking.
but if you give it a go, let us know how well it performs and fits.
Well tbh I'm leaning toward the black one too but this TPU thing caught my attention and I was wondering if anyone has it
mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
notice they have a cut out for the power button which was a issue on my first gel case
mnd_bg said:
Has anyone tried this thing?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=203617
Click to expand...
Click to collapse
I don't think anyone should have it yet since HTC haven't released it.
I ordered it from handtec before but they say they will get it at the end of the month so I canceled mine.
combat goofwing said:
notice they have a cut out for the power button which was a issue on my first gel case
Click to expand...
Click to collapse
It's not a cutout for the powerbutton.
It's for the 3.5 headphonejack.
emwdava said:
It's not a cutout for the powerbutton.
It's for the 3.5 headphonejack.
Click to expand...
Click to collapse
think you will find it is for the power button the 3.5mm jack is on the bottom in the long oval cut out
combat goofwing said:
think you will find it is for the power button the 3.5mm jack is on the bottom in the long oval cut out
Click to expand...
Click to collapse
To be honest, I don't think the picture shown is even the actual product. There is no hole for the speaker and the whole is definitely for the 3.5mm jack. (you can see the power button raised on the upper right corner). Since the case is not released yet, this is quite possible.
I've got this one too...
As CD993 says it does wobble, but only marginally... this is a TOUCH screen after all, you don't need to press very hard for it to respond!
The fact it's nearly £10 cheaper than the official HTC one (and yes, the image is wrong or else it's not going to have enough cutouts on the back!) is good enough for me!
cd993 said:
Just so you know, the following case does have a slight wobble to it left and right when typing whilst on a flat surface. Not loads, but a wobble is there!
cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150506304658"]BLACK GEL PROTECTION CASE COVER SKIN FOR HTC DESIRE HD
Click to expand...
Click to collapse
WTF is the matter with posting links btw? At what point does this 'privilege' begin?
very competitive with otterbox, but with grat designing
https://www.case-mate.com/HTC-Desire-HD/Case-Mate-HTC-Desire-HD-Pop-Case.asp
Nice I need to order
Looks very nice indeed! Might have to get one too, to interchange with my Otterbox case.
Though ive got a slight worry that glossy black will scratch like a motherducker in no time.
If anyone gets one can you post some pictures and maybe a video too? Curious to see what that plastic is like. Cheers!
I was gonna go for a casemate tough, but I think I might wait for this, looks very nice.
Just pre-ordered one from here:
http://www.htcdirect.co.uk/index.php?main_page=product_info&cPath=2_12_80&products_id=978
Sent from my Desire HD using XDA App
the back looks great, but too chunky around the screen...
panyan said:
the back looks great, but too chunky around the screen...
Click to expand...
Click to collapse
agree but there is no alternative better
I ordered mine two days ago. It should be here tomorrow. I'll post a review then.
bobbyphoenix said:
I ordered mine two days ago. It should be here tomorrow. I'll post a review then.
Click to expand...
Click to collapse
Sounds great, be sure to take lots of pictures.
Results are in!
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.
bobbyphoenix said:
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.
Click to expand...
Click to collapse
Does the edge of the camera lens protude from the case? Can't tell from the pictures.
PeatCoal said:
Does the edge of the camera lens protude from the case? Can't tell from the pictures.
Click to expand...
Click to collapse
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).
bobbyphoenix said:
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).
Click to expand...
Click to collapse
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.
PeatCoal said:
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.
Click to expand...
Click to collapse
Well as luck would have it I have one of those on the way too. I'll do the same kind of review when that one comes in. Can you tell I love cases?
bobbyphoenix said:
Can you tell I love cases?
Click to expand...
Click to collapse
..nope
I look forward to it
Nice review ordered mine too just now.
Sent from my Desire HD using XDA App
So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....
psych0t1c said:
So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....
Click to expand...
Click to collapse
The shinny black part is very hard plastic, and since the very soft gray part is fused to it, it is really really hard to get in and out. I almost feel like if I push any harder I'm going to break one or the other, but the soft part is just soft enough to get it in there. I don't see how it could get easier over time. It's one of those cases that once it's on, it's on for a long long time. Compared to the OtterBox Commuter case that one seems like it can fall off, and the Pop case seems like it was actually made into the phone, and not to come off without a struggle, but if I had to make a choice I would pick the Pop case 100% of the time. Again if you compare them side by side the OtterBox looks like it was made for a kid to play with, and the Case-Mate one that you buy tickets to see it in a museum. It is that good!
Thanks a lot for the quick reply mate. I was thinking that maybe one could cut or file down one of the plastic ridges that snap into place around the screen to hold the device.
I done that ages ago on a case for a XDA mini, and it worked quite nicely but obviously there is a thin line between making the in and out easier and making the case unusable by cutting in too far...
Again thanks for your input...
...this chunk of zeroes and ones has been generated by flashing a 400 Watt halogen bulb into the open fibres of a transcontinental communications cable...
Thank you for good products to introduce.
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
Samsung Galaxy Note 8.0 Case
Where did you buy yours?
Sent from my HTC One using Tapatalk 2
little rant...
What really annoys me about this and many cases is the lack of thought around the camera on the back. They leave a slot for it on the back peice of the case which is great, but when you open it up to actually take a photo, you need to hold the case like an open book as there isnt a slot on the front peice. I dont intend on using the camera much but having to hold the front flap out of the way of the lens while trying to get composition, focus and release the shutter is a pain in the bum! If I could flip the front all the way round to the back and hold it flush with the back, that would be far more convenient.
hertsjoatmon said:
little rant...
What really annoys me about this and many cases is the lack of thought around the camera on the back. They leave a slot for it on the back peice of the case which is great, but when you open it up to actually take a photo, you need to hold the case like an open book as there isnt a slot on the front peice. I dont intend on using the camera much but having to hold the front flap out of the way of the lens while trying to get composition, focus and release the shutter is a pain in the bum! If I could flip the front all the way round to the back and hold it flush with the back, that would be far more convenient.
Click to expand...
Click to collapse
+1!
What also bothers me a little is the slit in the front flap of the case... for US owners, it looks like a mistake since we don't have that speaker there. Other than that, very happy with the quality, low profile and details - rubber footings for landscape upright position, magnet to hold front flap as prop in "keyboard" mode. A little expensive but I did the round about with case buying with the tab 10.1 and ultimately liked the official book case most.
Cases are available at BestBuy and B&H.
Picked one up at Best Buy last night. Absolutely prefer this over the Moko i just got. Only thing missing compared to other cases is a loop for a larger stylus and it's not heavy enough where it needs a handstrap.
I don't care about a camera hole on the front flap (to take pictures when the flap is folded over) as rear camera on this is more vestigial to my tablet use.
I do have issues with trying to stand it up the tall way with the cover - it sometimes wont hold the stand form and flips the tablet down.
This may get easier as it breaks in. There is no clasp magnetic or otherwise that holds the screen cover closed so it will fly open at times.
The tablet is protected on 3 corners (except the one that holds the stylus, obviously), completely covers the plastic back except for camera hole and front flap is thin but should protect the screen well enough in a bag. I like the clean design and it does raise the "premium" feel of the tablet in hand by covering up all the plastic.
I think if you care about adding the least bulk to the unit while still having a means of protecting it a bit, I think it does well.
BTW, if you had the 7.7 and the OEM cover for that, this cover is almost exactly like it - except this front flap is even thinner than the one on that one and can fold to help it stand. The 7.7 form fitting case that Samsung made could only stand by reversing the case flap and it would always fall over.
I bought it from Best Buy as well, it's not my first choice of cases, but it's probably the best out there now. Just too expensive, but I need protection for this unit. I'm hoping Seidio makes a case but I don't think this tablet will sell that well. I hope I'm wrong but it's fairly expensive. I think it is worth it but I have terrible judgment and love electronics.
Sent from my SGH-T889 using Xparent Skyblue Tapatalk 2
Just curious, what colors are people getting? I picked up a white one at BB, but thinking about exchanging it for the black...
Every portable device I've owned since my first Walkman, with the exception of my 3rd gen iPod in 2004, has been black, so the white device and matching white case is a welcome change for me.
Sent from my GT-N5110 using xda premium
I couldn't take it anymore and exchanged for the black, lol. The all-white look was burning my eyes.
Picked this up today and it's going back. I do like how thin it is, but I notice the cover has a habit of bowing just enough to wake up the tablet and it's just close enough that it keeps waking it up. Case would be fine without the sleep/wake feature. Anyone know of a good knockoff without the magnet?
Sent from my GT-N5110 using Tapatalk 2
ExploreMN said:
Case would be fine without the sleep/wake feature. Anyone know of a good knockoff without the magnet?
Click to expand...
Click to collapse
You might like the STM Cape. It is a bit different, but appears to be very good quality, and it is less expensive and fairly light weight (judging by specs as I don't have one yet):
http://forum.xda-developers.com/showthread.php?t=2251888
I asked them and they confirmed it does not come with a magnet for wake/sleep. Personally that has disappointed me, but you provide a good example of where it can be a good thing to not have wake/sleep.
I've asked STM a few more questions that I'm waiting to hear back on, including what kind of padding is embedded in the front cover. Something that has concerned me about the official Samsung Book Cover is that the front cover seems so thin that I wonder how much protection it would really provide (particularly from any impact). The STM Cape appears to have some kind of stiff material (padding?) in between the outer layer and the soft inner lining. I'll post in the Cape thread whenever I hear back about that.
pluginalong said:
You might like the STM Cape. It is a bit different, but appears to be very good quality, and it is less expensive and fairly light weight (judging by specs as I don't have one yet):
http://forum.xda-developers.com/showthread.php?t=2251888
I asked them and they confirmed it does not come with a magnet for wake/sleep. Personally that has disappointed me, but you provide a good example of where it can be a good thing to not have wake/sleep.
I've asked STM a few more questions that I'm waiting to hear back on, including what kind of padding is embedded in the front cover. Something that has concerned me about the official Samsung Book Cover is that the front cover seems so thin that I wonder how much protection it would really provide (particularly from any impact). The STM Cape appears to have some kind of stiff material (padding?) in between the outer layer and the soft inner lining. I'll post in the Cape thread whenever I hear back about that.
Click to expand...
Click to collapse
Thanks, I'll check it out. I don't mind thin. I never do anything that would damage a device like a phone or tablet anyway. Mostly I just want it for scratch protection since it could slide around in my briefcase and what-not.
I'm ordering this case from ebay. Looks more stable then samsung case.
KLD-Smart-Wake-UP-Flip-PU-Leather-Case-Cover-Samsung-Galaxy-Note-8-0-N5100-N5110
Sent from my GT-N5100 using Tapatalk 2
scopidoo said:
I'm ordering this case from ebay. Looks more stable then samsung case. KLD-Smart-Wake-UP-Flip-PU-Leather-Case-Cover-Samsung-Galaxy-Note-8-0-N5100-N5110
Click to expand...
Click to collapse
If you haven't already ordered I'd recommend having a look at the following thread that was a bit negative about the KLD:
http://forum.xda-developers.com/showthread.php?t=2251300
The MoKo Ultra Slim Lightweight Smart-shell Stand Case mentioned in that same thread sounds more promising (in my opinion).
I have just ordered this one from ebay:
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=121107475861
(I cannot post links yet, you'll need to copy and paste in your web browser)
It is cheap and looks slim and similar to the KLD one and it has a magnetic tab to keep it securely closed.
According to the description it supports "auto sleep and wake up when close and open" but I am not sure if I believe it. I can always open a dispute if it is not true
pluginalong said:
If you haven't already ordered I'd recommend having a look at the following thread that was a bit negative about the KLD:
http://forum.xda-developers.com/showthread.php?t=2251300
The MoKo Ultra Slim Lightweight Smart-shell Stand Case mentioned in that same thread sounds more promising (in my opinion).
Click to expand...
Click to collapse
This does look like a winner. Not extremely please about the Samsung case, regarding the inability to stand it up or keep the flap closed.
If you ordered this let us know how it goes.
OneMoreBrick said:
This does look like a winner. Not extremely please about the Samsung case, regarding the inability to stand it up or keep the flap closed.
If you ordered this let us know how it goes.
Click to expand...
Click to collapse
Here's a helpful review:
http://forum.xda-developers.com/showthread.php?t=2270264
Anybody try the IVSO bluetooth keyboard cover?
http://www.amazon.com/Bluetooth-Key...&keywords=galaxy+note+8.0+keyboard+case+cover
drexappeal said:
Anybody try the IVSO bluetooth keyboard cover?
http://www.amazon.com/Bluetooth-Key...&keywords=galaxy+note+8.0+keyboard+case+cover
Click to expand...
Click to collapse
I have not, but that is an intriguing product. I wonder if you might get a sense of the quality by looking at the reviews for the below version which I would guess uses the same keyboard (but with a different enclosure)?
http://www.amazon.com/Samsung-Galaxy-Bluetooth-Keyboard-Portfolio/dp/B00BH1HI4M/ref=pd_sim_sbs_e_1
pluginalong said:
I have not, but that is an intriguing product. I wonder if you might get a sense of the quality by looking at the reviews for the below version which I would guess uses the same keyboard (but with a different enclosure)?
http://www.amazon.com/Samsung-Galaxy-Bluetooth-Keyboard-Portfolio/dp/B00BH1HI4M/ref=pd_sim_sbs_e_1
Click to expand...
Click to collapse
I read some reviews on the Note 10.1 version and they are mixed:
http://www.amazon.com/Wireless-Blue...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
I'll just keep it in consideration, unless someone on the forums actually purchases and tries it out.
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
I ordered one and hopefully get it by Friday/Saturday. No prime shipping with this purchase unfort.
Would be interested to know if the case blocks the speaker on the phone or it routes the sound toward you. It looks like it could be routing the sound from the speak to the 2 holes at the bottom.
Bigdny said:
I ordered one and hopefully get it by Friday/Saturday. No prime shipping with this purchase unfort.
Click to expand...
Click to collapse
Please let us know how it is. It looks pretty decent, hope it's not that bulky. Thanks
Sent from my PH-1 using Tapatalk
It seem that parts of the case are metal(aluminum?) and I hope this case won't make cell reception even weaker than it already is.
dandan2980 said:
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Xela19115 also mentioned the case here a few days ago. Looks like a tank itself.
dandan2980 said:
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
I may order when someone else serves as the test subject.
I'll stay tuned to see how other folks like it.
I ordered this case and immediately had horrible signal issues. I've e-mailed the seller asking if there's a solution. It's too bad to use as a phone, though wifi was not blocked at all. Normally I have strong LTE in my house but it's unusable with the case on.
Marvel should sue them for stealing Spiderman design (j/k). Only if this case had a belt clip, I'd bite. I want someone to make a case with a clip!
goldentequila said:
Marvel should sue them for stealing Spiderman design (j/k). Only if this case had a belt clip, I'd bite. I want someone to make a case with a clip!
Click to expand...
Click to collapse
They already have some cases with holster and belt clip on Amazon.
Sent from my ONEPLUS 3T using Tapatalk
to each their own... but gawd, that's ugly.
I bought it when it first went up, before their description made it clear it was steel, I was hoping for a thin metal slip. The case is heavy as hell, and the built in screen protector traps pocket lint between the screen protector and screen. The case is held on with 6 hex screws, which worked, but made it even heavier.
It did muffle sound a little, as to radio...I'm just switching to Ting with GSM from Sprint with my phone. I was worried for a bit that my phone was the issue, but a girl who has a galaxy phone has all the same signal issues I did on Sprint. I'll let you know of mine is better, and how GSM is impacted by the case later.
---------- Post added at 09:15 AM ---------- Previous post was at 09:10 AM ----------
I should also mention, like the Tudia, it made my side access worse. I use Lucid launcher specifically for the left side slide out favorite apps, these were really hard to activate on both this case, and the Tudia. I also use a pie fromthe right side, this was similarly hard to trigger, but at least I could customize the trigger width to accommodate the massive bearth.
Here is another new case on Amazon.
https://smile.amazon.com/gp/product/B07C4YVM6V/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Anyone seen it? Have it?
(Fixed the link)
tech_head said:
Here is another new case on Amazon.
https://smile.amazon.com/Essential-...696&sr=1-1-spons&keywords=essential+ph-1&th=1
Anyone seen it? Have it?
Click to expand...
Click to collapse
The shortcut leads to the phone rather than a case.
jhs39 said:
The shortcut leads to the phone rather than a case.
Click to expand...
Click to collapse
Fixed
https://smile.amazon.com/gp/product/B07C4YVM6V/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
That doesn't look like a quality case to me. The back looks like plastic. But there aren't a lot of cases compatible with the 360 Camera so if you want specifically to use that feature it's probably worth taking the chance since the case is so cheap. But if you don't care about the 360 Camera there are clearly way better choices.
jhs39 said:
That doesn't look like a quality case to me. The back looks like plastic. But there aren't a lot of cases compatible with the 360 Camera so if you want specifically to use that feature it's probably worth taking the chance since the case is so cheap. But if you don't care about the 360 Camera there are clearly way better choices.
Click to expand...
Click to collapse
I bought it.
It actually isn't cheap feeling.
Soft touch.
Pretty heavy.
Secures on the phone pretty well.
Looks like it will protect the phone in a drop.
It does add bulk.
The flip down for the camera is pretty cool.
The opening on the back for the camera is large since the case is so deep.
The fingerprint sensor hole is also large because they made it to clear the camera opening without leaving a small piece of TPU inside.
Overall I like it for the ~$10 I paid.
It is either this or naked.
I bought it as well.
Doesn't feel cheap to me.
Adds a decent amount of bulk to the phone but not too much.
The flip down feels pretty sturdy and hopefully it won't loosen over time.
It has a nice feel to it. Soft but not slick. Sort of rubberized.
I've been using the first Tudia case that came out for this phone for awhile now and it's fine most of the time. But when I do use the 360 lens it is a hassle. Having to peel the case off. Hopefully this fixes that problem.
ryaleon87 said:
I bought it as well.
Doesn't feel cheap to me.
Adds a decent amount of bulk to the phone but not too much.
The flip down feels pretty sturdy and hopefully it won't loosen over time.
It has a nice feel to it. Soft but not slick. Sort of rubberized.
I've been using the first Tudia case that came out for this phone for awhile now and it's fine most of the time. But when I do use the 360 lens it is a hassle. Having to peel the case off. Hopefully this fixes that problem.
Click to expand...
Click to collapse
I tried it yesterday and the flip down works fine.
It's a bit stiff to latch and unlatch, but it does solve the 360 camera issue.
No more case removal! It also means that those screen protectors that glue around the edges will bel see likely to lift.
I still haven't decided if I want to use LOCA to attach a screen protector to my phone.