Please check -> Proper Root Unite 2 without PC
You need:
1. Drivers
2. SP Flash Tool
3. SuperSU.zip
3. Scatter file
4. Recovery
5. Micromax Unite 2
Make Backups before flashing:
1. Readback backup
2. NVRAM backup
To root your phone follow these steps:
Step 1:
Copy downloaded SuperSU.zip to External SD card.
Step 2:
Open SP Flash Tool and load the scatter file.
Step 3:
Click in the location column of RECOVERY and select the downloaded recovery file.
Step 4:
Switch off your phone and remove the battery.
Step 5:
Click Download in SP Flash Tool.
Step 6:
Insert battery and connect your phone via USB cable (Don't switch on).
Step 7:
After successful flashing of recovery press vol+, vol- and power on buttons to reboot to recovery.
NOTE:
In CTR recovery:
Swipe left to go backward
Swipe right to go forward
Step 8:
To Install SuperSU:
Tap Install zip
Tap Choose zip Sd card
Swipe right and select SuperSU file
Step 9:
Swipe left to go backward and select Reboot the Phone.
Tap Reboot the Phone
Done.
My work:
[Repartition][Without pc] Increase apps storage in Micromax A106 Unite 2
CWM recovery for Micromax Unite 2 / Myphone Rio Lite
Recovery Flashable Stock ROM for Micromax A106 Unite 2
Hit Thanks :good: if i helped you..
Related
You must create a Readback backup of stock ROM before flashing any custom ROM or Recovery. If anything goes wrong and your phone doesn't boot then you can flash the stock ROM through the Readback backup.
You need:
1. Drivers
2. SP Flash Tool
3. Scatter file
4. MTKDroidTools
5. Micromax Unite 2
To create Readback backup follow these steps:
Step 1:
Open SP Flash Tool, load the scatter file and click the Readback tab.
Step 2:
Click "Add" then double click in the File column of the added entry.
Step 3:
Select save location and click "Save".
Step 4:
Write 0x3E180000 in "Length" and click "OK".
Step 5:
Turn off your phone, remove battery for few seconds then insert battery (don't switch on).
Step 6:
Click "Read Back" and connect your phone via USB cable.
Step 7:
After successful Read Back remove USB cable and switch on your phone.
Step 8:
Open MTKdroidTools and connect your phone via USB cable. If MTKdroidTools doesn't detect your phone then in your phone go to "Settings -> Developer Options" and select "USB debugging". If there is no Developer Options in Settings then go to "About phone" and tap "Build number" 7 times to enable Developer Options.
Step 9:
In MTKdroidTools click "root, backup, recovery" tab.
Step 10:
Click "To process file ROM_from Flash Tool".
Step 11:
Select the Readback file.
Step 12:
Click "No"
Step 13:
Click "Cancel"
Step 14:
Wait for the task to complete.
You can find your backup files in the "MtkDroidTools/backups" folder
Done.
My work:
[Repartition][Without pc] Increase apps storage in Micromax A106 Unite 2
CWM recovery for Micromax Unite 2 / Myphone Rio Lite
Recovery Flashable Stock ROM for Micromax A106 Unite 2
Hit Thanks :good: if i helped you..
Recovery backup is needed to restore your entire phone (system, apps and data).
You need:
1. Phone.
2. Recovery.
To create recovery backup follow these steps:
Step 1:
Power off your phone.
Step 2:
Press vol+, vol- and power on buttons to reboot to recovery.
NOTE:
In CTR recovery:
Swipe left to go backward
Swipe right to go forward
Step 3:
Tap Backup and Restore.
Step 4:
Tap Backup.
Step 5:
Wait for Backup to complete.
Step 6:
Swipe left to go backward and select Power off.
Done.
My work:
[Repartition][Without pc] Increase apps storage in Micromax A106 Unite 2
CWM recovery for Micromax Unite 2 / Myphone Rio Lite
Recovery Flashable Stock ROM for Micromax A106 Unite 2
Hit Thanks :good: if i helped you..
You need:
1. Drivers
2. SP Flash Tool
3. Readback backup
4. Micromax Unite 2
To flash Stock ROM follow these steps:
Step 1:
Open SP flash tool and load the Scatter file of Stock ROM (which you got from readback backup).
Step 2:
Select all files by clicking the Location column of each row. Select secro.img for CACHE AND USRDATA.
Step 3:
Select Firmware Upgrade in drop-down menu.
Step 4:
Switch off phone and remove the battery.
Step 5:
Click Download in SP Flash Tool.
Step 6:
Insert battery and connect your phone via USB cable (Don't switch on). Wait for approx 3 min 33 sec to complete flashing.
Step 7:
Remove USB cable and press vol+, vol- and power on buttons to reboot to recovery.
Step 8:
Press power button to see recovery options.
Step 9:
Press vol- (down) button and select wipe data/factory reset.
Step 10:
Press menu key (left most).
Step 11:
Press vol- (down) button and select Yes -- delete all user data.
Step 12:
Press menu key (left most).
Step 13:
Select reboot system now and press menu key.
DONE.
IF THIS DOESN'T WORK THEN FLASH JELLYBEAN ROM AND AGAIN FLASH STOCK ROM.
My work:
[Repartition][Without pc] Increase apps storage in Micromax A106 Unite 2
CWM recovery for Micromax Unite 2 / Myphone Rio Lite
Recovery Flashable Stock ROM for Micromax A106 Unite 2
Hit Thanks :good: if i helped you..
Bricked Your Unite 2??
Try Unbricking it in a DIFFERENT WaY.
So, Let's Start
You need these:
Bricked MMX UNITE 2(duh!)
USB Cable
PC(Windows 7)
Memory Card(size Doesn't Matter)
MTK USB Drivers(Attached)
ZIP flashable STOCK ROM(Go to needroms.com){you need to register to download ROMS}
SP flash Tool(Attached)
SuperSu(In case you Want to Root your Phone again)(Attached)
STEP 1.
Copy the STOCK ROM to the Memory Card.
STEP 2.
Extract all Files downloaded on the desktop.Open up SPflash tools and load the scatter file by clicking 'Scatterloading'.
select Recovery.img and boot.img .
STEP 3.
Click Download. Remove the battery of your device and connect it to your PC.
STEP 4.
The Progress Bar will Turn Red then to Purple and Finally Yellow.
You Will get a small window with a Green circle telling Download OK.
You Have successfully installed CWM Recovery.
STEP 5.
Disconnect the Phone,insert the memory card and Battery. Power ON the phone by pressing VOLUME UP+DOWN+POWER keys. It will Boot into CWM recovery.
STEP 6.
Select Install zip from SD card (Use volume and power keys For Browsing).Select the zip file and select YES.
Select Go back and Reboot system NOW.
You're Done!
HOPE THIS HELPS
:good: Don't Forget to Hit ThankZ If IT Did Help you :good:
progress bar stuck when it is red
wt can i do?
plz hlp!
thanks in advance.
Please help me ASAP.
I am trying to do as u said but it only goes on ok till step 4. After that it doesnt respond at all when i put the battery and memory card with only the zip stock rom file in it. please reply ASAP.
Requirements For Root Symphony i50:
1. Windows PC
2. Mobile
3. installment of usb/vcom drivers
4. SuperSU
Disclaimer:
I am not responsible for bricked devices.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Download Require Files - Here>>
And Extract
Step 1 : First install the vcom & usb drivers
Step 2: Copy "SuperSU.zip" in your phone memory.
Step 2 : Now open sp flash tools & select scatter file "MT6580_Android_scatter.txt" with recovery.img.
Step 3 : Remove battery From Phone, Click "Download" on sp flash tool & Connect USB With Cable with PC,
Wait till Successfull.
Step 4 : Now connect battery & press on Vollum Up key and power key at same time.
Step 5 : Press on install button and Select "SuperSU.zip"
Step 6: Now Swipe on install Button.
Step 7 : After successfully instaling supersu, reboot the system.
A Video example (its for i10) - https://www.youtube.com/watch?v=A-hbCWRHaYw&feature=youtu.be
Hit Thanks if you success.
It worked now my i50 is rooted now but i need a cm14 custom rom for it can you help? Please
I need a Symphony i18 twrp or root
Place help us
Need CWM recovery zip file for Symphony Z15
My device name is Symphony Z15 I need CWM recovery zip file,plz help.