Database Info

Micromax Unite 2 - Read Back Guide[Easy way]

Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.

Sudeep Duhoon said:
Procedure:
1. Download and install MTK VCOM drivers.
Problem in installation?? Go here
2. Open SP flash tools and go to read back tab. (alternative download link of sp flash tools)
3. Click 'Add' and tap on added read back entry.
4. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
5. Click on read back and connect phone without battery. Wait till it completes.
6. Once you see a green circle, close sp flash tools and switch on the phone.
7. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
8. Go back and enter developers options(in settings), and check usb debugging on.
9. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
10. In mtk droid tools, click 'root, backup and recovery' tab.
11. Click 'To process file ROM_ from Flash Tool.
12. Locate the file you got from read back.
13. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
14. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Click to expand...
Click to collapse
1) we have to load scatter file first right?
2) how huch time it takes to readback?

codergenius said:
1) we have to load scatter file first right?
2) how huch time it takes to readback?
Click to expand...
Click to collapse
Oops, sry. That was added from day one in my pc so forgot.
Added scatter now.
About 5 mins.

anyone using win 7 pro 64 bit : able to install vcom drivers & successfully rooted unite 2 (i am unable to readback using sp flash tools...getting error as "USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.cpp,195)" in QT_FLASH_TOOL.log and error "IsValidCOMPort(): Instance ID(USB\VID_8086&PID_0189\6&1279F1F3&0&5) (FlashToolLib/host/windows/com_enum.cpp:942)" in BROM_DLL_V5.log while read back, i am not sure if it is driver issue as preloader driver gets successfully installed

green circle
Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.[/
What do you mean by green circle? I can't see except that stop button, which is already green.
Click to expand...
Click to collapse

Green circle
Zao, it worked for me after putting in the battery. The flash_tools hanged for a minute then automatically started backing up.
Regards,
Abhishek

MTK specific apps
Hi,
Can you confirm if the rom is 4.4.2.
If it is 4.4.2 ROM, then can you please extract and provide the mtk specific apks from /system/app,
ie;
EngineerMode,
EngineerCode
EngineerModeSIM
Mkt_boot
MTKAndroidSuiteDeamon
MTkBT
MTKLogger
MTKThermalManager
YGPS
Thanks in advance.
Or can you provide me the link to download KitKat rom

Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Click to expand...
Click to collapse
i am facing some problem with preloader.....please guide me through.........

kanishka singh said:
i am facing some problem with preloader.....please guide me through.........
Click to expand...
Click to collapse
What problem? Explain a bit.
eagledipesh said:
Hi,
Can you confirm if the rom is 4.4.2.
If it is 4.4.2 ROM, then can you please extract and provide the mtk specific apks from /system/app,
ie;
EngineerMode,
EngineerCode
EngineerModeSIM
Mkt_boot
MTKAndroidSuiteDeamon
MTkBT
MTKLogger
MTKThermalManager
YGPS
Thanks in advance.
Or can you provide me the link to download KitKat rom
Click to expand...
Click to collapse
Here is the stock rom. Yes it is kitkat.
http://support.moulnisky.com/index.php?dir=Micromax/
zao.remy said:
Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.........................Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.[/
What do you mean by green circle? I can't see except that stop button, which is already green.
Click to expand...
Click to collapse
A pop up will come when it will finish. On center of the sp flash tools.
codergenius said:
anyone using win 7 pro 64 bit : able to install vcom drivers & successfully rooted unite 2 (i am unable to readback using sp flash tools...getting error as "USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.cpp,195)" in QT_FLASH_TOOL.log and error "IsValidCOMPort(): Instance ID(USB\VID_8086&PID_0189\6&1279F1F3&0&5) (FlashToolLib/host/windows/com_enum.cpp:942)" in BROM_DLL_V5.log while read back, i am not sure if it is driver issue as preloader driver gets successfully installed
Click to expand...
Click to collapse
Try using usb deview to uninstall and reinstall the drivers or try changing the com port from sp flash tools itself or try any other pc.
Click to expand...
Click to collapse

i did it before rooting my phone...the process still remains the same...????

bladehunter said:
i did it before rooting my phone...the process still remains the same...????
Click to expand...
Click to collapse
Yes

Sudeep Duhoon said:
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download scatter from here .
3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)
4. Click 'Add' and tap on added read back entry.
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
6. Click on read back and connect phone without battery. Wait till it completes.
7. Once you see a green circle, close sp flash tools and switch on the phone.
8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.
9. Go back and enter developers options(in settings), and check usb debugging on.
10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)
11. In mtk droid tools, click 'root, backup and recovery' tab.
12. Click 'To process file ROM_ from Flash Tool.
13. Locate the file you got from read back.
14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.
15. Now wait again.
Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Click to expand...
Click to collapse
I cannot do this.. there is an error after 13% of the process completion.. Asking me to Press CTRL+ALT+T, What should i do.. is this step necessary to do if i only want to Root this phone and Perform Data REpartition.. Please Help me iam new to this Process

saikiransama said:
I cannot do this.. there is an error after 13% of the process completion.. Asking me to Press CTRL+ALT+T, What should i do.. is this step necessary to do if i only want to Root this phone and Perform Data REpartition.. Please Help me iam new to this Process
Click to expand...
Click to collapse
Not necessary, but highly recommend.

wat will be the approx size of the read back file ?

Scaning USB port failed!
Hi OP, plz help me out
M not able to readback following only this guide, getting the below error in logs:
"07/12/2014 19:40:39.305 FlashTool[8032][5132][D]: APCore::ConnMediaUSB:reConnect(): Scanning USB port...(..\QT_FlashTool_Refactor\Conn\ConnMedia.cpp,53)
07/12/2014 19:40:59.801 FlashTool[8032][8372][D]: FileUtils::CheckDirectory(): FileUtils::CheckDirectory(): the dir(C:\ProgramData\SP_FT_Logs) already exists.(..\QT_FlashTool_Refactor\Utility\FileUtils.cpp,44)
07/12/2014 19:41:09.407 FlashTool[8032][5132][D]: USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.cpp,195)"
can U plz let me know what possibly can be the reason for this error?

MTK droid tools 253 is not identifying the UNite 2 8GB model. What went wrong?
SOLVED - HAD TO WAIT FOR AROUND A MINUTE FOR THE FIRST TIME.

Problem with 8GB version
When I connect my phone to the computer, the preloader driver is installed and there's the typical connection sound in windows. But just after that it gets disconnected in like 1-2 secs. I am unable to use MTK Flash Tool because of it.
I have a 8GB rom version of unite 2. Anybody else having the same problem?? Any solutions???
PS: My phone is perfectly getting detected by adb in developer mode.

Rooted succesfully with u r method
Followed u r all step for Readback and Rooting Got success thanks for u r hard work
I have 4 Gb Version :good:

Sakthihari said:
wat will be the approx size of the read back file ?
Click to expand...
Click to collapse
512kb or 512b, i don't remember if that was in kb or b.
akash.gpta said:
When I connect my phone to the computer, the preloader driver is installed and there's the typical connection sound in windows. But just after that it gets disconnected in like 1-2 secs. I am unable to use MTK Flash Tool because of it.
I have a 8GB rom version of unite 2. Anybody else having the same problem?? Any solutions???
PS: My phone is perfectly getting detected by adb in developer mode.
Click to expand...
Click to collapse
Click download and then connect the phone, it will not get removed.
Niraj251 said:
Followed u r all step for Readback and Rooting Got success thanks for u r hard work
I have 4 Gb Version :good:
Click to expand...
Click to collapse
Press thanx, don't say it.

bootloop after flashing A rom

How to create NVRAM backup?

You must create a NVRAM backup before flashing custom ROMs. Flashing a wrong recovery can also give invalid IMEI error. If your phone doesn't connect to network or wifi then you have to restore the NVRAM backup.
You need:
1. MTKDroidTools
2. Rooted Android Phone
To create NVRAM backup follow these steps:
Step 1:
In your phone go to Settings -> Developer Options and select USB debugging. If there is no Developer Options in Settings then go to About phone and tap Build number 7 times to enable Developer Options.
Step 2:
Open MTKdroidTools and connect your phone via USB cable.
Step 3:
In MTKdroidTools click ROOT and grant root permission in phone.
Step 4:
Click IMEI/NVRAM.
Step 5:
Click Backup.
You can find your backup files in the MtkDroidTools\BackupNVRAM folder.
Done.
My work:
[Repartition][Without pc] Increase apps storage in Micromax A106 Unite 2
CWM recovery for Micromax Unite 2 / Myphone Rio Lite
Recovery Flashable Stock ROM for Micromax A106 Unite 2
Hit Thanks :good: if i helped you..

How to root Micromax Unite 2 (A106)?

Please check -> Proper Root Unite 2 without PC
You need:
1. Drivers
2. SP Flash Tool
3. SuperSU.zip
3. Scatter file
4. Recovery
5. Micromax Unite 2
Make Backups before flashing:
1. Readback backup
2. NVRAM backup
To root your phone follow these steps:
Step 1:
Copy downloaded SuperSU.zip to External SD card.
Step 2:
Open SP Flash Tool and load the scatter file.
Step 3:
Click in the location column of RECOVERY and select the downloaded recovery file.
Step 4:
Switch off your phone and remove the battery.
Step 5:
Click Download in SP Flash Tool.
Step 6:
Insert battery and connect your phone via USB cable (Don't switch on).
Step 7:
After successful flashing of recovery press vol+, vol- and power on buttons to reboot to recovery.
NOTE:
In CTR recovery:
Swipe left to go backward
Swipe right to go forward
Step 8:
To Install SuperSU:
Tap Install zip
Tap Choose zip Sd card
Swipe right and select SuperSU file
Step 9:
Swipe left to go backward and select Reboot the Phone.
Tap Reboot the Phone
Done.
My work:
[Repartition][Without pc] Increase apps storage in Micromax A106 Unite 2
CWM recovery for Micromax Unite 2 / Myphone Rio Lite
Recovery Flashable Stock ROM for Micromax A106 Unite 2
Hit Thanks :good: if i helped you..

How to flash/restore stock ROM of Micromax Unite 2?

You need:
1. Drivers
2. SP Flash Tool
3. Readback backup
4. Micromax Unite 2
To flash Stock ROM follow these steps:
Step 1:
Open SP flash tool and load the Scatter file of Stock ROM (which you got from readback backup).
Step 2:
Select all files by clicking the Location column of each row. Select secro.img for CACHE AND USRDATA.
Step 3:
Select Firmware Upgrade in drop-down menu.
Step 4:
Switch off phone and remove the battery.
Step 5:
Click Download in SP Flash Tool.
Step 6:
Insert battery and connect your phone via USB cable (Don't switch on). Wait for approx 3 min 33 sec to complete flashing.
Step 7:
Remove USB cable and press vol+, vol- and power on buttons to reboot to recovery.
Step 8:
Press power button to see recovery options.
Step 9:
Press vol- (down) button and select wipe data/factory reset.
Step 10:
Press menu key (left most).
Step 11:
Press vol- (down) button and select Yes -- delete all user data.
Step 12:
Press menu key (left most).
Step 13:
Select reboot system now and press menu key.
DONE.
IF THIS DOESN'T WORK THEN FLASH JELLYBEAN ROM AND AGAIN FLASH STOCK ROM.
My work:
[Repartition][Without pc] Increase apps storage in Micromax A106 Unite 2
CWM recovery for Micromax Unite 2 / Myphone Rio Lite
Recovery Flashable Stock ROM for Micromax A106 Unite 2
Hit Thanks :good: if i helped you..

Not working on Karbonn Titanium S20

Pls Help Me to Root My Device
Sent from my Karbonn TITANIUM S20 using XDA Free mobile app

Alas!
alKavinraj said:
Pls Help Me to Root My Device
Sent from my Karbonn TITANIUM S20 using XDA Free mobile app
Click to expand...
Click to collapse
I see no one cared to answer the question so here I am with a full solution. This method below is there on other blogs and is the one i used.
Note: I take no responsibility if you brick your phone or something even though its an extremely simple procedure. Excluding the download time and the other stuff this process will take less than 2 minutes. Also, since you are not replacing you rom or something, all your data should remain intact, still please make a backup of all your important stuff. Lets get on with it.
Step 1: First of all download the drivers from the following link, install them on your PC and restart it.
http://www.mobistel.com/wordpress/wp-content/download/Driver.zip
Step 2: Download and extract the Karbonn titanium Rooting Kit.
http://www.4shared.com/zip/nfiO8VUWce/Titanium_S20_Rooting_kit.html
Step 3: Extract the Karbonn T S20 CWM Recovery.zip and the Sp-flashtools.zip.
Step 4: Go to the spflash tools extracted folder and open the "Flashtool.exe" as administrator.
Step 5: After it opens click on the "Load Scatter" option and select the "MTK6582_Android_scatter_emmc.txt".
Step 6: Check the box next to Recovery option among the options that comes after selecting scatter file. Click on the locations tab in the row of "recovery option" which you just selected.
Step 7: After doing the above, click on download.
Step 8: Now switch off your Karbonn Titanium S20 and connect the phone to PC via Data cable with the battery inside
Step 9: Wait till the process is finished and a green color Tick mark appears on the screen of the Sptools.
Step 10: After this remove the data cable, and press (Vol up + Power) Button simultaneously to go into the CWM recovery mode.
Step 11: In CWM recovery mode, select Mount and Storage -> Mount USB storage -> now connect the phone via data cable.
Step 12: Put the "Update-SuperSu.zip" in the Sd card (Do not extract it). Now Disconnect the phone and reboot it in CWM (recovery mode) again.
Step 13: Select the "Install Zip from sd card" -> "Choose Zip from Sd card" -> "Update-binary.zip" on the Sd card and flash it.
Step 14: Reboot. Now you have rooted your karbonn titanium s20 and also installed the CWM on your phone.
Step 15: Profit!
Do hit the thanks button if this helps ya!