Related
I try to flash V28 prerooted with LG Flashtool first i flash the fls, then i flash the bin.
Later i restart the phone and still with logo all time. Then i try to come back to Ginger: i flash v21e first i flash the fls, then flash the bin, but in the middle somebody call me at door, and when come back LG Flashtool said error. Since then i can't run the phone. No download mode (pressing vol+ and power with usb cable connected), no recovery (pressing 3d, vol- and power) no normal run (power) the only thing i found is when connect the phone with usb and pressing vol + (no power button) in my netbook with XP the device administrator do something extrange, dissapear everything and apperar everything in a few seconds, but nothing new) Omap44xx is installed but don't recognize the phone. Then i don't know if phone still function or not.
Can anyone help me?
http://forum.xda-developers.com/showthread.php?t=1942836
Sent from my LG-P920 using xda premium
krija said:
http://forum.xda-developers.com/showthread.php?t=1942836
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
I really had the same problem and this method is not working.any hElp please
hey hey
you have to go into the fastbootmode. Load Oampboot(the newest version)
plug your battery out of your phone. Connect it via USB install oampdriver.
so now choose your Phone, if the tool starts write any data to your phone, do nothing. Your phone will be run into the S/W Mode. So you can insert your battery and run your Flashtool to flash your KDZ Bin FLS or anything else
good luck
karimkahale said:
I really had the same problem and this method is not working.any hElp please
Click to expand...
Click to collapse
no way out. only with that method or (un)authorized service.
Follow the ressurection guide. Master the fastboot mode your phone is unbrickable
@bart
i know ? have i said its brickable ?
Just use the resurrection guide ..
It will work because ur pc is detecting omap
sent from my lg-p920 powered with xbsall's finest work
Well I finally managed to Hard Brick my A110 a few days back. I was thinking that everything was lost and my A110 was as good as a brick! But I struggled with it for two days and finally managed to bring it back to life! This is how I hard bricked it, but resurrected it too....
Hard brick:
The hard brick happens when you flash a non A110 stock ROM through SP flash. This happens when you get overconfident during ROM development experiments and forget the basic fact that flashing the "pre-loader" accidentally of any other ROM( (even if it is of MT6577) that is different from A110 leads to the phone going dead. The charge LED dies, and the phone is totally in alien land when the PC sees it through the USB cable You cannot flash anything through the SP flash any more. The phone will not power on or boot. Welcome to the land of bricked phones!
Resurrection:
1) First perform an uninstall of the MMX/Mobistel drivers you already have on
your P.C. Install the drivers again.
2) Take a piece of insulated wire (Around 3 cms long) and solder a 10K resistor
to one end. To the other end solder a pin to the pin head so that the tip is
free.
3) Remove your phone battery and keep the phone ready.
4) On the PC/Laptop, start SP flash tool and select the right scatter from the factory stock A110 ROM. un-tick all except the first five (Preloader, DSP_BL, MBR, EBR1, UBOOT) + CWM recovery (You should have replaced default recovery with CWM recovery in the ROM folder). Click "Firmware-upgrade, Download.
5) With battery taken off from your phone connect it to the PC/Lap using the USB cable.
6) Now touch the resistor end to the USB Cable outer part (GND) visible at the point of USB connector connected to the phone.
7) Touch the other part (pin end) to all visible copper terminals one by one.
8) Now without removing the cable, place the battery back.
9) Now keep your fingers crossed. If you have luck, you will see the red, blue, green and finally yellow lines on the SP tool window. You are done!!!
10) If your battery was having good charge when you were bricked, you can now power on to recovery mode and flash your CWM saved ROM or any other ROM.
11) If your battery was low, when you were bricked, leave it to charge for an hour before attempting to flash the entire stock ROM through SP flash or CWM.
Cheers!!!:victory:
Its better u make a video and attached it below. its really helpful. thanxx a lot mate for creating this solution :thumbsup:
i second that suggestion! a video or an orderly series of pics........
skdmech94 said:
Its better u make a video and attach.........
Click to expand...
Click to collapse
wow maan u really are awesome i never had myself in d scenario but now i know that theres always a way thanks to you hats off to u pal
Yap bro u r right....u have to post a video guide......
colors can.....canvas 2
At least a series of pictures are most for such guide.
Great tutorial (please make video or screens)
Will help so many a110 users
Whose devices are in verge of death
From horrible MMX service center guys
Sent from my Micromax A110 using xda premium
Great article!! Video would be extremely helpful!
Sent from my GT-I9300 using xda app-developers app
Hard brick occurs when we flash preloader of different incompatible fone ryt...and hence fone wont detect on spflash tool..
What if we install the preloader drivers of that incompatible device; can we get the fone to detect in spflashtools ? If it wrks, then we can flash back the A110 preloader files ryt ?
Some one with a hardbricked device ,pls try it out if possible, before doing the hardware method suggested by OP
Sent from my Micromax A110
pcoruganti said:
Great article!! Video would be extremely helpful!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Will post some snaps
Hi,
Thanks for this wonderful tutorial, Now i am not worried about my phone being bricked when i try new things in my mobile. thanks buddy.
where i can get CWM recovery?
Where i can get that CWM recovery?
I followed all these steps i couldnt do anymore, what i should i do next? Plz help
I followed all these steps i couldnt do anymore, what i should i do next? Plz help
pradipsoman said:
Well I finally managed to Hard Brick my A110 a few days back. I was thinking that everything was lost and my A110 was as good as a brick! But I struggled with it for two days and finally managed to bring it back to life! This is how I hard bricked it, but resurrected it too....
Hard brick:
The hard brick happens when you flash a non A110 stock ROM through SP flash. This happens when you get overconfident during ROM development experiments and forget the basic fact that flashing the "pre-loader" accidentally of any other ROM( (even if it is of MT6577) that is different from A110 leads to the phone going dead. The charge LED dies, and the phone is totally in alien land when the PC sees it through the USB cable You cannot flash anything through the SP flash any more. The phone will not power on or boot. Welcome to the land of bricked phones!
Resurrection:
1) First perform an uninstall of the MMX/Mobistel drivers you already have on
your P.C. Install the drivers again.
2) Take a piece of insulated wire (Around 3 cms long) and solder a 10K resistor
to one end. To the other end solder a pin to the pin head so that the tip is
free.
3) Remove your phone battery and keep the phone ready.
4) On the PC/Laptop, start SP flash tool and select the right scatter from the factory stock A110 ROM. un-tick all except the first five (Preloader, DSP_BL, MBR, EBR1, UBOOT) + CWM recovery (You should have replaced default recovery with CWM recovery in the ROM folder). Click "Firmware-upgrade, Download.
5) With battery taken off from your phone connect it to the PC/Lap using the USB cable.
6) Now touch the resistor end to the USB Cable outer part (GND) visible at the point of USB connector connected to the phone.
7) Touch the other part (pin end) to all visible copper terminals one by one.
8) Now without removing the cable, place the battery back.
9) Now keep your fingers crossed. If you have luck, you will see the red, blue, green and finally yellow lines on the SP tool window. You are done!!!
10) If your battery was having good charge when you were bricked, you can now power on to recovery mode and flash your CWM saved ROM or any other ROM.
11) If your battery was low, when you were bricked, leave it to charge for an hour before attempting to flash the entire stock ROM through SP flash or CWM.
Cheers!!!:victory:
Click to expand...
Click to collapse
pradipsoman said:
Well I finally managed to Hard Brick my A110 a few days back. I was thinking that everything was lost and my A110 was as good as a brick! But I struggled with it for two days and finally managed to bring it back to life! This is how I hard bricked it, but resurrected it too....
Hard brick:
The hard brick happens when you flash a non A110 stock ROM through SP flash. This happens when you get overconfident during ROM development experiments and forget the basic fact that flashing the "pre-loader" accidentally of any other ROM( (even if it is of MT6577) that is different from A110 leads to the phone going dead. The charge LED dies, and the phone is totally in alien land when the PC sees it through the USB cable You cannot flash anything through the SP flash any more. The phone will not power on or boot. Welcome to the land of bricked phones!
Resurrection:
1) First perform an uninstall of the MMX/Mobistel drivers you already have on
your P.C. Install the drivers again.
2) Take a piece of insulated wire (Around 3 cms long) and solder a 10K resistor
to one end. To the other end solder a pin to the pin head so that the tip is
free.
3) Remove your phone battery and keep the phone ready.
4) On the PC/Laptop, start SP flash tool and select the right scatter from the factory stock A110 ROM. un-tick all except the first five (Preloader, DSP_BL, MBR, EBR1, UBOOT) + CWM recovery (You should have replaced default recovery with CWM recovery in the ROM folder). Click "Firmware-upgrade, Download.
5) With battery taken off from your phone connect it to the PC/Lap using the USB cable.
6) Now touch the resistor end to the USB Cable outer part (GND) visible at the point of USB connector connected to the phone.
7) Touch the other part (pin end) to all visible copper terminals one by one.
8) Now without removing the cable, place the battery back.
9) Now keep your fingers crossed. If you have luck, you will see the red, blue, green and finally yellow lines on the SP tool window. You are done!!!
10) If your battery was having good charge when you were bricked, you can now power on to recovery mode and flash your CWM saved ROM or any other ROM.
11) If your battery was low, when you were bricked, leave it to charge for an hour before attempting to flash the entire stock ROM through SP flash or CWM.
Cheers!!!:victory:
Click to expand...
Click to collapse
if you will make video...then u r awesome awesome awesome
Sent from my Demon A110 using xda app-developers app
drsooraj said:
Hard brick occurs when we flash preloader of different incompatible fone ryt...and hence fone wont detect on spflash tool..
What if we install the preloader drivers of that incompatible device; can we get the fone to detect in spflashtools ? If it wrks, then we can flash back the A110 preloader files ryt ?
Some one with a hardbricked device ,pls try it out if possible, before doing the hardware method suggested by OP
Sent from my Micromax A110
Click to expand...
Click to collapse
What an idea.
The only problem is who's gonna hard brick his phone for this experiment.
Matthew_Farrell said:
What an idea.
The only problem is who's gonna hard brick his phone for this experiment.
Click to expand...
Click to collapse
yea ...thats why i am asking it to the next guy who gets a hardbrick and is just about to follow pradip sir's steps following this thread, to just give a try , before doing it the hardwire method!
Resister method works for almost every phone
It will put the phone in download mode
Even it is not booting or charging
guide can be found on xda
Just search it
Jigs methods works as well
Sent from my Micromax A110 using xda premium
In Step 7 which "visible copper terminals" are meant?
The Phone is connected to PC and the other end of data cable is pluged into phone, so there are no copper pins to touch.
is it possible to do same on mmx a87... m8ne is also hard bricked....
Phoenix said:
Resister method works for almost every phone
It will put the phone in download mode
Even it is not booting or charging
guide can be found on xda
Just search it
Jigs methods works as well
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
after getting into the download mode how can I flash a rom in mmx a87.. plz help.. my fone hard bricked...
Hi all
I've managed to create a CWM recovery for the Zen Ultrafone 701HD..... Thought I'd share this too...
For my tutorial on Rooting the same phone see here :-
http://forum.xda-developers.com/showthread.php?t=2283125
See the above link to activate USB debugging and install ADB drivers.....
CREDITS:-
I've Tested the CWMr on my own Phone....It Works..
This was made through the resources already available on various threads in XDA..
All credits to the original developers...
Special thanks to Koush Dutta for his online CWM revovery builder.... works like a charm..
I take DO NOT responsibility for any damages - It worked on my phone, no reason it should
not work on the other 701HDs out there.... Take a backup of all important stuff... Better safe than sorry..
STEP 1 - INSTALL PHONE DRIVERS
Connect your phone to your computer via USB.
Go to control panel -> device manager after a few minutes
Right click on Zen Ultrafone and update drivers ... required drivers are attached in above link.
Your device manager should not normally have any unrecognized hardware after this step. ( see attached Image).
The"Android Composite ADB Interface" MUST be listed by now... if not recheck your steps again.
Disconnect and restart your phone and your computer and make sure it stays that way.
STEP 2 -INSTALL THE USB VCOM DRIVER
This driver helps the computer recognize the phone's flash memory when it is SWITCHED OFF.
Disconnect your phone and switch it off... remove battery and put it back in just to make sure.
Keep device manager in windows open.
Connect the phone now.
The computer should list the Preloader in device manager with a yellow triangle.
Right click and install the drivers... accept any prompts to install unsigned drivers as they appear.
Disconnect the phone..
STEP 3 - FLASH THE CWM RECOVERY
Download and extract SP Flash tools to a folder.
Place the scatter file and the recovery image in a separate folder
Open SP Flash tools select the scatter loading file given
CAREFULLY UNCHECK ALL BOXES EXCEPT RECOVERY!! - this is essential!!
Click on recovery and choose the recovery image provided
Press 'Download' button on SP Flash tools.... DO NOT hit the firmware update button...
Now reconnect your phone.... accept any prompts...
When the Green ring appears, you are done...
Please hit thanks..... and please JOIN the forum and leave some feedback...
Edit: - I am somehow unable to uplaod the CWM recovery to xda.... meanwhile i've uploaded it here..
https://docs.google.com/file/d/0B9ZlmxCxbtQ8UjhfX3ZYRFZmS3c/edit?usp=sharing
Alternate (easier) method
This method needs a rooted phone-
Install mobile uncle tools from Play Store.
Place the recovery.img provided in root of SD card.
open mobile uncle tools and flash the recovery.
Thats It!!
completely lost faith in zen uf 701 hd..
got a product which has few blue lines on the screen and camera not working.
made a refund and looking to buy any other quadcore.
canvas hd, canvas 2 plus, umi x2
which is better?
Sorry to hear that man. I dont believe the canvas is any better in terms of quality control. Where did you buy the ultrafone from? Mine came in pretty good packing.
Looks like I've lost a valuable developer resource
Sent from my ultrafone 701HD using xda app-developers app
I'd suggest you go for the Panasonic p51. Just wait a few more months - its price is falling by the day
Sent from my ultrafone 701HD using xda app-developers app
Hello all. Received my 701 HD a couple of days back . thankfully no defects in my piece. And phone Is awesome !
And I was really surprised you guys have already rooted And Made CWM ready ! My salutes bro....
Looking forward to root and try better ROms when this new mobile vanity wears off soon
BTW Is there an unrooting method present ? Maybe it will be if help looking at many complaints this phone has
Sent from my ultrafone 701HD using xda app-developers app
Haven't tried to in root it yet. Guess flashing the stock ROM will do.
Sent from my ultrafone 701HD
Oh yes... I Forgot that flashing stock ROM does the trick
But then I guess we will also have to remove the custom recovery to avail warranty . just in case ??
Sent from my ultrafone 701HD using xda app-developers app
Yes. For warranty, you'll have to restore everything to stock state. The stock recovery can be flashed via stools too. Just replace the cmw with the stock recovery in my tutorial.
Sent from my ultrafone 701HD
BTW. I am sure we can find a lot of clone phones of our zen 701. Notably canvas HD, xolo Q1000. Celkon signature HD
Maybe in near future we could port the best roms from them. What say ?
Sent from my ultrafone 701HD using xda app-developers app
That is the plan for now
Sent from my ultrafone 701HD
vishwasnp said:
BTW. I am sure we can find a lot of clone phones of our zen 701. Notably canvas HD, xolo Q1000. Celkon signature HD
Maybe in near future we could port the best roms from them. What say ?
Sent from my ultrafone 701HD using xda app-developers app
Click to expand...
Click to collapse
uploading fazhdv3 rom for zen 701 hd 74%
a copy of sam hd v3 of a116
http://forum.xda-developers.com/showthread.php?t=2201122
Guys. Is it only me or are you also noticing that Wi fi reception is very weak in this cell ? :banghead:
Sent from my ultrafone 701HD using xda app-developers app
No issues with WiFi here. Tried connecting through public hotspots , mobile thetering, used this phone as hotspot, used WiFi direct with super beam - all work like a charm.
Looks like my WiFi router has gone numb due to cold these days
Any suggestions to improve signal strength of router ? The weak signal is really testing my patience :banghead:
Sent from my ultrafone 701HD using xda app-developers app
Could be due to interference. Try a selecting manual frequency in router
Dudes. Have any of you guys installed custom Roms yet ? The pathetic streaming of YouTube from WiFi in this phone is testing my patience
Sent from my ultrafone 701HD using xda app-developers app
Is your WiFi issue resolved? I be never tried YouTube so far..... Will try and then update
I moved my router to a closer position now. It is better. Will observe for a few more days see how it performs
Sent from my ultrafone 701HD using xda app-developers app
dextrorotatrix said:
Hi all
I've managed to create a CWM recovery for the Zen Ultrafone 701HD..... Thought I'd share this too...
For my tutorial on Rooting the same phone see here :-
http://forum.xda-developers.com/showthread.php?t=2283125
See the above link to activate USB debugging and install ADB drivers.....
CREDITS:-
I've Tested the CWMr on my own Phone....It Works..
This was made through the resources already available on various threads in XDA..
All credits to the original developers...
Special thanks to Koush Dutta for his online CWM revovery builder.... works like a charm..
I take DO NOT responsibility for any damages - It worked on my phone, no reason it should
not work on the other 701HDs out there.... Take a backup of all important stuff... Better safe than sorry..
STEP 1 - INSTALL PHONE DRIVERS
Connect your phone to your computer via USB.
Go to control panel -> device manager after a few minutes
Right click on Zen Ultrafone and update drivers ... required drivers are attached in above link.
Your device manager should not normally have any unrecognized hardware after this step. ( see attached Image).
The"Android Composite ADB Interface" MUST be listed by now... if not recheck your steps again.
Disconnect and restart your phone and your computer and make sure it stays that way.
STEP 2 -INSTALL THE USB VCOM DRIVER
This driver helps the computer recognize the phone's flash memory when it is SWITCHED OFF.
Disconnect your phone and switch it off... remove battery and put it back in just to make sure.
Keep device manager in windows open.
Connect the phone now.
The computer should list the Preloader in device manager with a yellow triangle.
Right click and install the drivers... accept any prompts to install unsigned drivers as they appear.
Disconnect the phone..
STEP 3 - FLASH THE CWM RECOVERY
Download and extract SP Flash tools to a folder.
Place the scatter file and the recovery image in a separate folder
Open SP Flash tools select the scatter loading file given
CAREFULLY UNCHECK ALL BOXES EXCEPT RECOVERY!! - this is essential!!
Click on recovery and choose the recovery image provided
Press 'Download' button on SP Flash tools.... DO NOT hit the firmware update button...
Now reconnect your phone.... accept any prompts...
When the Green ring appears, you are done...
Please hit thanks..... and please JOIN the forum and leave some feedback...
Click to expand...
Click to collapse
My phone is not loading the image also unable to load the recovery file too. Can you please help me out where can i download the recovery.img file as the link you have provided does not have the same.
Hi Devs,
My micromax canvas 2 just came form the service station and it's not getting switched on. I tried rooting with the SP tools but since the USB debugging wasn't enabled, the didn't root. Is there a way to deal with this?
Thanks in Advance,
Apurv
@c.apurv
Disconnect your phone.
Remove battery from phone.
Start sp flash tools.
Load scatter file.
Click upgrade firmware.
Connect your phone with battery removed.
Wait for green ring.
Disconnect.
Power on phone.
Done.
Sent from my A110 using xda app-developers app
hulgo said:
@c.apurv
Disconnect your phone.
Remove battery from phone.
Start sp flash tools.
Load scatter file.
Click upgrade firmware.
Connect your phone with battery removed.
Wait for green ring.
Disconnect.
Power on phone.
Done.
Sent from my A110 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the information Huglo :good:
hi all,
In most of Q/A thread of tipo/miro , i have seen that people are facing trouble after unlocking bootloader and get therir device bricked. so here, after some research ,i have mentioned notes that they should have try to get their tipo if possible.may be it will help
-Notes
-Change USB Port & USB Cable and Make Sure driver is installed Correctly
-Sometimes it looks like hardbrciked but it is not,so check that is there any vibration/LED sign while trying to turn on device
-Remove sd-card and SIM ,put your device in charging for 24 hours ,there is a little hope to get RED LED after
-Try External Charger and Charge your battery for long time & Connect your device without battery by holding volume down button and insert battery. It may detect your device on flashtool
-If you get LED Then try to connect with flash/fastboot mode and flash stock rom or use PC companian/SUS after Relocking Bootloader.
IF ANYONE WATCHING THIS THREAD HAVING SOLVED THAT KIND OF ISSUE THEN PLZ SHARE YOUR EXPERIANCE TO HELP OTHERS.
that's when people get software problem. but with drivers or devices problem like dead boot, we need Sony
Sent from my ST23i using XDA Premium 4 mobile app
tit_xperiamiro said:
that's when people get software problem. but with drivers or devices problem like dead boot, we need Sony
Sent from my ST23i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
softbrick can easily get recover by flashtool
In Most Case of hardbrick Sony will charge for Motherboard
Sent from my ST21i using xda app-developers app
Problem-Xperia E Green LED & Vibration while turning On But not turning On
->For Solution Check Post By UltraGamerHD in this Thread http://forum.xda-developers.com/showthread.php?t=2577490
Sent from my ST21i using Tapatalk