Root is required for this application. Thanks to DesignGears & Chainfire for putting in the work for root to be on our phones.
Please try method 1 and 2 before posting that it doesn't work. Let me know which one worked for you in the comments.
_________________________________
Method 1 :
Download FDroid from this link - https://f-droid.org/FDroid.apk
Open FDroid and download AdAway.
Some have reported that this AdAway will install the host file without any issues.
_________________________________
Method 2 :
Download AdAway here - http://www.androidfilehost.com/?fid=23060877490004670
(All credit for the link goes to mrRobinson)
After you have installed and opened the app -
Click "Download files and apply ad blocking"
The app is going to crash, don't worry!
Re-open the application and click "Download files and apply ad blocking" again
This time it will give you a pop up saying "Copying of host file failed", once again don't worry!
Now click the refresh button in the top right, and now for the last time click "Download files and apply ad blocking"
You will now be told that it was successful and to restart.
This is how I got it to work, I apologize if it does not work on your device.
Please click the thanks button if this worked for you.
Screenshots
Don't you need root for this?
slidesear said:
Don't you need root for this?
Click to expand...
Click to collapse
Yes
147aaron said:
Yes
Click to expand...
Click to collapse
why wouldnt the official app work without crashing if you have root?
try the official one:
http://sufficientlysecure.org/index.php/adaway/
Guitarboarder28 said:
why wouldnt the official app work without crashing if you have root?
try the official one:
http://sufficientlysecure.org/index.php/adaway/
Click to expand...
Click to collapse
I tried to get the the app from that website but they want you to download it through a store. And I don't know about others but it hangs on downloading icons or something. So the only way I got the app was from mrRobinson post. According to him its the same app, but he just compiled it from the source from the Devs website.
does this nix the youtube apps? (pre-rolls)
wdkingery said:
does this nix the youtube apps? (pre-rolls)
Click to expand...
Click to collapse
I just tested it for you and no. I don't know of a way to that ether. I tried the youtube app and the mobile, they both had a ad on the same video that I tested.
Well yea but the stores legit no worries there
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I just installed it normally with no problems. Never even had a crash the first time.
I'm not rooted (yet), but all of my rooted device AdAway just works. So I really don't see any reason for the AdAway NOT to work if your phone is rooted. Unless I'm missing something here...
Pikezer1337 said:
I just installed it normally with no problems. Never even had a crash the first time.
Click to expand...
Click to collapse
Visual360 said:
I'm not rooted (yet), but all of my rooted device AdAway just works. So I really don't see any reason for the AdAway NOT to work if your phone is rooted. Unless I'm missing something here...
Click to expand...
Click to collapse
This was just my experience with it. I have used adaway on other devices and it just installed with no problem. I posted this because I had seen some other people were having issues with it, so I was just letting people know how I got it to work.
147aaron said:
Please follow tutorial before posting that it doesn't work.
Root is required for this application. Thanks to DesignGears & Chainfire for putting in the work for root to be on our phones.
Download AdAway here - http://www.androidfilehost.com/?fid=23060877490004670
(All credit for the link goes to mrRobinson)
After you have installed and opened the app -
Click "Download files and apply ad blocking"
The app is going to crash, don't worry!
Re-open the application and click "Download files and apply ad blocking" again
This time it will give you a pop up saying "Copying of host file failed", once again don't worry!
Now click the refresh button in the top right, and now for the last time click "Download files and apply ad blocking"
You will now be told that it was successful and to restart.
This is how I got it to work, I apologize if it does not work on your device.
Please click the thanks button if this worked for you.
Screenshots
Click to expand...
Click to collapse
I downloaded my AdAway from f-Droid, but I've seen the same crash behavior.
After the crash, the download and apply worked on the first try.
(The first time, I had to flash back to stock and re-root. The second time applying AdAway blocking took a couple of tries before it went through (6 more specifically))
you can try adaway 2.3 official
or
AdAway-release_Build-10.09.13
the new release is working like a charm
147aaron said:
I tried to get the the app from that website but they want you to download it through a store. And I don't know about others but it hangs on downloading icons or something. So the only way I got the app was from mrRobinson post. According to him its the same app, but he just compiled it from the source from the Devs website.
Click to expand...
Click to collapse
Mine also hung on downloading icons....so i went to playstore and seached for busybox...downloaded and installed newest version by jrummy....installed box and then tried the app again and install flawlessly....doesnt mean it will work for everyone but it worked for me...:good::laugh:
I just install it from fdroid. I don't really use a lot of stuff from there as it's mostly in the market, but I do for this one so I don't have to look for updates on a website etc.
i dled it from fdroid also, it didnt work at first, would just hang up on applying the files but i rebooted and it was successful the first try
rockinandroid said:
Mine also hung on downloading icons....so i went to playstore and seached for busybox...downloaded and installed newest version by jrummy....installed box and then tried the app again and install flawlessly....doesnt mean it will work for everyone but it worked for me...:good::laugh:
Click to expand...
Click to collapse
khaytsus said:
I just install it from fdroid. I don't really use a lot of stuff from there as it's mostly in the market, but I do for this one so I don't have to look for updates on a website etc.
Click to expand...
Click to collapse
xaniq said:
i dled it from fdroid also, it didnt work at first, would just hang up on applying the files but i rebooted and it was successful the first try
Click to expand...
Click to collapse
Thanks for the feedback. I will update the thread to have both methods shortly
I've found supersu leaving dozens of sudaemon's around which sometimes breaks root entirely (until you reboot) or sometimes you can manage to get su to work and then kill apps.
Adaway seems to potentially be a leading cause of this, or maybe it's just the obvious victim, I'm not sure. But I often find it's complaining it could not apply the hosts file, so I get into a shell, find a bunch of stray sudaemon's, kill them, then it's happy again.
I think there's still some tweaking that can be done for su on 4.3.
All I did was install Fdroid, then
Go into to terminal and type this
su
restorecon -R -v /data/data
Then install adaway and run as normal
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Use FDroid
Just a quick heads-up. I used FDroid to install AdAway yesterday...no problems, loaded first time and enabled without a hitch. A word to the less experienced Android (Note 3) flashers like myself.
OFF TOPIC Question: What's the best Terminal Emulator to use for someone like me, who wants to learn to use a TE?? Your assistance would be most appreciated.
Thanx...Chief
Related
Hi,
I'm looking for the following apps. Can someone please post or supply a link?
-Fox News
-ebay
-Yelp
-Walmart
Thanks greatly!
Darren
I found several fox news apps, the ebay app and others on the market. Do you have the market installed?
Sent Kindle via my drunk Fire.
Unfortunately I don't. I would prefer to sideload rather than rooting.
darrencp22 said:
Unfortunately I don't. I would prefer to sideload rather than rooting.
Click to expand...
Click to collapse
You don't need to (permanently) root to install marketplace. You can use BurritoRoot to temporary root (which works until you reboot) and install the framework and marketplace apks. Then you reboot unrooted and it all works perfectly.
After the last patch (6.2.2), BurritoRoot apk no longer works but you can use ADB to push BurritoRoot2.bin and run it from shell to get the same result.
As far as I am aware, you can't side load the google apps. But FYI after installing the google market and supporting apks, I have had zero issues with DRM or anything else.
I know it was removed from the market.. I have the latest adway from F-droid but it doesn't work.. And yes I am rooted.
Is there any Adblockers that are working? Or ways to fix Adaway?
Randomacts said:
I know it was removed from the market.. I have the latest adway from F-droid but it doesn't work.. And yes I am rooted.
Is there any Adblockers that are working? Or ways to fix Adaway?
Click to expand...
Click to collapse
I had this problem so I uninstalled it and reinstalled it and now its working great..
Sent from my Nexus 5 using XDA Premium 4 mobile app
AdAway works fine. You need to either reboot before installing the APK, or clear out all recent apps before hand.
Yup, works fine for me also
Check your Superuser/SuperSU app to make sure you gave it permission, or;
Uninstall the app, reboot and reinstall, or;
Run fix permissions in CWM/TWRP.
Just to chime in here:
I have noticed that Adaway does fail to apply updated Hosts files. If you just keep telling it to update, it will usually work the second or third time. But it does fail for me the first time almost every time. I'm not sure if it's a r/w issue with Kitkat or just some kind of general compatibility issue.
If by "not working" you mean it fails to apply the host file, just keep trying. It should work eventually.
Hi Vodafone users,
you have already noticed that the new payment app Vodafone Wallet do not work with rooted devices. It asks for su support and has a FC.
Here my easy instruction that let it work with root.
You only need to set in shell blocking su with the xposed module xprivacy (full version).
Kind regards
Peterle
The Peterle said:
Hi Vodafone users,
you have already noticed that the new payment app Vodafone Wallet do not work with rooted devices. It asks for su support and has a FC.
Here my easy instruction that let it work with root.
You only need to set in shell to blocking su with the xposed module xprivacy (full version).
Kind regards
Peterle
Click to expand...
Click to collapse
Thank you!
It works!
I rejoiced prematurely.
Now I get the message:
Wallet can't be set up.
Sorry, something went wrong and Wallet can't be setup. Please try again later.
Call Customer care or close Wallet.
Click to expand...
Click to collapse
massaquah said:
I rejoiced prematurely.
Now I get the message:
Click to expand...
Click to collapse
Try rootcloak?
usvimal said:
Try rootcloak?
Click to expand...
Click to collapse
Yes, didn't work.
Try to reinstall it. I had the same issue yesterday.
Edit:
I turned xprivacy for Vodafone Wallet off. Let it show me the root warning. Then block su via xprivacy and it starts normally. [emoji39]
Please i need help with xprivacy antes Vodafone wallet
The Peterle said:
Try to reinstall it. I had the same issue yesterday.
Edit:
I turned xprivacy for Vodafone Wallet off. Let it show me the root warning. Then block su via xprivacy and it starts normally. [emoji39]
Click to expand...
Click to collapse
Hello, please i need some help with this.
Yesterday i buy the license pro for the xprivacy, and ok, now i have xprivacy pro.
The problem, is dont Work the Vodafone wallet, i test a couple of times and i test all the opcions and nothing...
Please help me, i try your instruccions and always Fc, clase force., if you up a images of proccesing i Will very happy with you.
A lot of thanks for your time
The thing is that it work only for a few minutes. U only need to set blocking su in shell.
When it FC you must give the app all rights and open it with the root warning then block su and open it again.
It is not a stable solution but it works.
Regards Peterle
There's a Cydia variant, too.. Instead of the Xposed Variant you could try this. Heard it works better for a lot of apps.
The Peterle said:
The thing is that it work only for a few minutes. U only need to set blocking su in shell.
When it FC you must give the app all rights and open it with the root warning then block su and open it again.
It is not a stable solution but it works.
Regards Peterle
Click to expand...
Click to collapse
Thanks, but with your instructions,always have a Fc, When charguing Vodafone wallet, I dont know why,
Its imposible for me, thanks allright
The Peterle said:
Try to reinstall it. I had the same issue yesterday.
Edit:
I turned xprivacy for Vodafone Wallet off. Let it show me the root warning. Then block su via xprivacy and it starts normally. [emoji39]
Click to expand...
Click to collapse
When you write you got the same issue, do you mean you got exactly this error message?
Wallet can't be set up.
Sorry, something went wrong and Wallet can't be setup. Please try again later.
Call Customer care or close Wallet.
Yep. But try to open one time without blocking su and after that with blocking su. It's still working then for a few minutes.
Edit. And u have to close it via task manager each time.
Regards Peterle
The Peterle said:
Yep. But try to open one time without blocking su and after that with blocking su. It's still working then for a few minutes.
Edit. And u have to close it via task manager each time.
Regards Peterle
Click to expand...
Click to collapse
1. Unblocked Wallet in XPrivacy
2. Started Wallet. No tour, Error message at once: Wallet can not be setup on a rooted phone. FC
3. Closed via task manager
4. blocked su in XPrivacy
5. started Wallet, tour started, press "Skip Tour", error message "Wallet can't setup......"
(
Stange.
Please give a try to reinstall Wallet again.
Regards
The Peterle said:
Stange.
Please give a try to reinstall Wallet again.
Regards
Click to expand...
Click to collapse
Thank you for trying to help!
But reinstalling the app doesn't change anything.
I'm using an LG G3 rooted, I used rootCloak, added vodafone wallet to the list of apps, and after force stopping the wallet and starting it again it worked flawlessly.
evilgt500 said:
I'm using an LG G3 rooted, I used rootCloak, added vodafone wallet to the list of apps, and after force stopping the wallet and starting it again it worked flawlessly.
Click to expand...
Click to collapse
Did you alo install SElinux Mode Changer and Cydia Substrate as described in the rootcloak instructions?
I want to give it a try and I am not sure if I really have to install all three packages.
massaquah said:
Did you alo install SElinux Mode Changer and Cydia Substrate as described in the rootcloak instructions?
I want to give it a try and I am not sure if I really have to install all three packages.
Click to expand...
Click to collapse
I only downloaded the xposed module from the xposed repo, activated it and rebooted the phone.
I didnt install anything besides that.
evilgt500 said:
I only downloaded the xposed module from the xposed repo, activated it and rebooted the phone.
I didnt install anything besides that.
Click to expand...
Click to collapse
Ok, I managed to successfully hide root from the app and I don't get the message about Wallet not running on rooted phones. (I achieved the same thing with XPrivacy mentioned by the op.)
But I still get the error message
Wallet can't be set up.
Sorry, something went wrong and Wallet can't be setup. Please try again later.
Call Customer care or close Wallet.
Click to expand...
Click to collapse
I am beginning to wonder if there's something wrong with my sim card.....
massaquah said:
Ok, I managed to successfully hide root from the app and I don't get the message about Wallet not running on rooted phones. (I achieved the same thing with XPrivacy mentioned by the op.)
But I still get the error message
I am beginning to wonder if there's something wrong with my sim card.....
Click to expand...
Click to collapse
Did you try calling costumer service? I got that message before using rootcloak, but after that it just worked. I would bet it's the sim that is not working properly.
Nope.
^Preemptively answering all PMs.
This sounds amazing, May i ask for a very wanted feature? Android 10(Q) battery! If you make this possible ill love you to the ends of the world and donate a bottle of something good lol ?
Thanks for this. Can you tell me if the transcripts for screened calls are available with this?
mikkis2k said:
This sounds amazing, May i ask for a very wanted feature? Android 10(Q) battery! If you make this possible ill love you to the ends of the world and donate a bottle of something good lol
Click to expand...
Click to collapse
What are you asking for?
lollyjay said:
Thanks for this. Can you tell me if the transcripts for screened calls are available with this?
Click to expand...
Click to collapse
I'm not sure if call screen saves the transcript, but I've interacted with live transcriptions with multiple responses. You can see my screenshots in the other call screen thread.
TotallyAnxious said:
What are you asking for?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/themes/magisk-aod-lockscreen-weather-mods-oos-t3847008
"v1.7 (23/04/2019)
- Add Android Q battery icon style"
This, if its possible tho, its weird that the oneplus 6 thats on pie can and we cant, you think its possible? ?
mikkis2k said:
https://forum.xda-developers.com/oneplus-6/themes/magisk-aod-lockscreen-weather-mods-oos-t3847008
"v1.7 (23/04/2019)
- Add Android Q battery icon style"
This, if its possible tho, its weird that the oneplus 6 thats on pie can and we cant, you think its possible? ?
Click to expand...
Click to collapse
No idea. I'll maybe look into it. But it's not something that immediately hits me as "hey I can do that". I'm incredibly lazy and stoned a lot (stage 3 colon cancer survivor). So keep that in mind lol
Well dang, I still can't get call screening even with this. That's the only feature I truly missed when I left pixel 2 xl for a op7pro. I just have the worst luck trying to get it back.
Also I had a super nice stable device on 9.5.13 with root and a lot of nice things and the only reason I even went to 10 was the other thread said it was working on 10 and xxx said it worked on 10 and now I've been on 10.0.1 for 3 days and it's the buggiest thing I've used ever
Sent from my OnePlus7Pro using XDA Labs
spart0n said:
Well dang, I still can't get call screening even with this. That's the only feature I truly missed when I left pixel 2 xl for a op7pro. I just have the worst luck trying to get it back.
Also I had a super nice stable device on 9.5.13 with root and a lot of nice things and the only reason I even went to 10 was the other thread said it was working on 10 and xxx said it worked on 10 and now I've been on 10.0.1 for 3 days and it's the buggiest thing I've used ever
Click to expand...
Click to collapse
It's incompatible with your set up or you didn't follow the directions. (I'm not angry). But I've posted screenshots proving it works
So try eliminating variables till it works.
https://forum.xda-developers.com/on...bling-google-pixel-call-t3946535/post80596215
TotallyAnxious said:
It's incompatible with your set up or you didn't follow the directions. (I'm not angry). But I've posted screenshots proving it works
So try eliminating variables till it works.
https://forum.xda-developers.com/on...bling-google-pixel-call-t3946535/post80596215
Click to expand...
Click to collapse
Well I am on the T-Mobile version converted to international so mine is the gm1915 which you already said might not work. I completely clearer out every magisk module I had, rebooted to a stock rooted phone and things were fine, installed your first module, rebooted things were fine, installed the companion module and get a bootloop. Thankfully I have twrp and uninstalled the companion module and now it boots. I just have a gut feeling it's not going to work on here and I REALLY hate wiping my data so I'm just going to wait and see if someone else makes a breakthrough on the gm1915 model
Sent from my OnePlus7Pro using XDA Labs
spart0n said:
Well I am on the T-Mobile version converted to international so mine is the gm1915 which you already said might not work. I completely clearer out every magisk module I had, rebooted to a stock rooted phone and things were fine, installed your first module, rebooted things were fine, installed the companion module and get a bootloop. Thankfully I have twrp and uninstalled the companion module and now it boots. I just have a gut feeling it's not going to work on here and I REALLY hate wiping my data so I'm just going to wait and see if someone else makes a breakthrough on the gm1915 model
Click to expand...
Click to collapse
Well you didn't follow the instructions. You didn't install Google phone. Please reread.
If you don't install Google phone before flashing the companion. It won't boot.
I provided clear instructions. Follow them and you'll get call screen.
How to install (Magisk Manager or TWRP):
0. Uninstall kirisakura kernel companion, it's included.
1. Install "Anxious7Pro_v*.zip".
2. Reboot.
3. Install google phone apk from apkmirror or just use the apk in the companion module.
4. Set up google phone, i.e. grant all permissions (including "Draw over other apps" and "Modify system settings"), set as default phone app, open app and set up available features.
5. Install "Anxious7ProCompanion_v*.zip".
6. Reboot.
7. Profit.
Also you should pretty much always have BusyBox installed if you're rooted.
TotallyAnxious said:
Well you didn't follow the instructions. You didn't install Google phone. Please reread.
If you don't install Google phone before flashing the companion. It won't boot.
I provided clear instructions. Follow them and you'll get call screen.
How to install (Magisk Manager or TWRP):
0. Uninstall kirisakura kernel companion, it's included.
1. Install "Anxious7Pro_v*.zip".
2. Reboot.
3. Install google phone apk from apkmirror or just use the apk in the companion module.
4. Set up google phone, i.e. grant all permissions (including "Draw over other apps" and "Modify system settings"), set as default phone app, open app and set up available features.
5. Install "Anxious7ProCompanion_v*.zip".
6. Reboot.
7. Profit.
Also you should pretty much always have BusyBox installed if you're rooted.
Click to expand...
Click to collapse
I have no idea what kirisakura kernel companion is, but is compatible with Smurf kernel? Could that be my problem?
I also had Google phone installed before I did this, I preferred it over oos dialer from the start
Sent from my OnePlus7Pro using XDA Labs
spart0n said:
I have no idea what kirisakura kernel companion is, but is compatible with Smurf kernel? Could that be my problem?
I also had Google phone installed before I did this, I preferred it over oos dialer from the start
Click to expand...
Click to collapse
You should follow the instructions. If it says install Google phone, you should do that. If it's already installed that means you should uninstall to install. And it's just a handful of shell script commands. It is NOT the issue.
I'm not trying to be difficult. But you've twice not followed the instructions. If you don't follow them. It won't work.
The instructions were set up specifically for this. The non-boot that is caused by Google phone being installed as a system app prior to being a user app. I have no idea why in hell that would cause a non-boot. But it does. As I said I am very lazy. I did everything I could to make this a one and done module. So I wouldn't have to provide much support.
Kirisakira companion is listed as feature but I actually rewrote it and that will probably be put into the original mod from freak07. It's just to emphasize not needing to install both.
I think it's ridiculous it requires instructions but it's the only consistent way I've found to get all the listed features working. Please please please ? ?? read them carefully and follow them. Meaning the below paragraph is the ridiculous part btw.
It makes no sense Google phone causes a non-boot when installed as system app first. Even in a module by itself. It causes that.
I spent a week figuring out the easiest way to do this. And I got it down to under 10 steps. Please follow them.
I even spent time leanring how the unity module template works ecause the companion module is unity. And I'm really lazy.
Simplified instructions
How to install (Magisk Manager or TWRP):
0. Uninstall Kirisakura kernel companion and Google Phone, if both/either are installed. Reboot if you uninstalled.
1. Install "Anxious7Pro_v*.zip".
2. Reboot.
3. Install google phone apk from apkmirror or just use the apk inside the companion module.
4. Set up google phone, i.e. grant all permissions (including "Draw over other apps" and "Modify system settings"), set as default phone app, open app and set up available features.
5. Install "Anxious7ProCompanion_v*.zip".
6. Reboot.
7. Profit.
If you don't follow the instructions, you'll probably end up in a non-boot/bootloop.
@TotallyAnxious I will post here. I will be doing clean install of Beta 4 in a couple of hours, and post feedback here. One question though... I am a beta tester for Google Phone. Should I not use it, and instead install the nodpi version of latest .APK that you linked?
Sent from my JiaYu S3 using XDA Labs
lollyjay said:
@TotallyAnxious I will post here. I will be doing clean install of Beta 4 in a couple of hours, and post feedback here. One question though... I am a beta tester for Google Phone. Should I not use it, and instead install the nodpi version of latest .APK that you linked?
Click to expand...
Click to collapse
Didn't you just confirm it works with that screenshot? And I use beta too. But I have stable in the companion module and you can use any verison. I just don't want to provide a non stable starting point. I get less issues reported that way haha you'll learn overtime I consider how to minimize the effort I need to put into support beyond the OP. I'm incredibly lazy.
TotallyAnxious said:
Didn't you just confirm it works with that screenshot? And I use beta too. But I have stable in the companion module and you can use any verison. I just don't want to provide a non stable starting point. I get less issues reported that way haha you'll learn overtime I consider how to minimize the effort I need to put into support beyond the OP. I'm incredibly lazy.
Click to expand...
Click to collapse
lol same here (lazy). But I think that testing your modules with clean beta 4 install is worth the time and effort.
Sent from my JiaYu S3 using XDA Labs
lollyjay said:
lol same here (lazy). But I think that testing your modules with clean beta 4 install is worth the time and effort.
Click to expand...
Click to collapse
I don't think it is but I haven't tried beta OnePlus software yet. But I doubt it's gonna be that different with a clean install. Can you post the screenshot here so people see it works? Until it's posted here, people can click the link to see it.
https://forum.xda-developers.com/on...-nolimits-7-0-speed-ram-t3933927/post80645203
TotallyAnxious said:
I don't think it is but I haven't tried beta OnePlus software yet. But I doubt it's gonna be that different with a clean install. Can you post the screenshot here so people see it works?
Click to expand...
Click to collapse
Sure, np
Sent from my JiaYu S3 using XDA Labs
Hi, Ive just followed the instructions and got this working.. but i previously had the google phone installed as system app so went to my uninstaller and uninstalled 3 things, phone, phone .com and android.phone i think it was and now i have no mobile data.
Any idea what i install again to get this back? Thanks!
So, I tried literally every single trick to make this app called "Paytm First Games" think that I am on a official rom and I am non rooted. But whatever I did it failed me no matter what. It kicks me out of the app anyways.
The god app's link: https://play.google.com/store/apps/details?id=com.paytm.paytmplay
Applications I used:
Magisk with cts & integrity true, the Prop editor module that comes in magisk, Used official fingerprint, tried other roms, without rooting only with a custom rom but with safety net pass, Renaming Magisk, Island.
if there is anything that I may have missed suggest.
any dev reading this please help. I need this app work on my phone.
sakubhaia089 said:
So, I tried literally every single trick to make this app called "Paytm First Games" think that I am on a official rom and I am non rooted. But whatever I did it failed me no matter what. It kicks me out of the app anyways.
The god app's link: https://play.google.com/store/apps/details?id=com.paytm.paytmplay
Applications I used:
Magisk with cts & integrity true, the Prop editor module that comes in magisk, Used official fingerprint, tried other roms, without rooting only with a custom rom but with safety net pass, Renaming Magisk, Island.
if there is anything that I may have missed suggest.
any dev reading this please help. I need this app work on my phone.
Click to expand...
Click to collapse
I read that google has introduced a new API in the last couple months, that detects rooting. I noticed an app I had before that worked under Magisk, will not run now. It is disappointing, because it was just a PDF reader...
There is a XDA thread for installing just SU that does not change the directory structure or patches the bootloader...I dont know if this would work, but you may try it and see.
can you gimme the link of the thread? thanks in adv!
sakubhaia089 said:
can you gimme the link of the thread? thanks in adv!
Click to expand...
Click to collapse
https://www.xda-developers.com/safetynet-hardware-attestation-hide-root-magisk/
https://forum.xda-developers.com/android/general/su-t4143987
Facing the same issue. Do you have any solution on how to make the paytmfirstgames app work on rooted device?