This is the Froyo FRG22 image for our Milestone. but as this is not using the kernel, there are some limit to functions based on kernel requirement. But its close, and works great and is alot faster.
You can also follow updates on Twitter now: Dexter Picard (DexterPicard) on Twitter or
me a Red bull, and you're sure i stay up working on this mod´or you can visit my new homepage at Dexter's mods
Primary Image download - MotoFrenzy v0.52 FULL image
OLDER FULL RELEASES -
MotoFrenzy v0.51 FULL image
MotoFrenzy v0.5a FULL image
MotoFrenzy v0.4 FULL image
MotoFrenzy folder goes into /nandroid/adbrecovery on your SDCARD
ALWAYS WIPE YOUR PHONE BEFORE INSTALLING A FULL IMAGEPatches
none
download the latest attached zip , and inside you find a MotoFrenzy-vx.xx-update-nosign zip , which you copy to your sdcard into the folder /OpenRecovery/updates and recover from OpenRecovery menu.
Patches only match the release which it is made for. so 0.1 release has patches 0.1(a-z) and so on. you cannot use 0.1a on a 0.2 release.
THEMES (works on 0.5 but FRG22 features are lost)
Themes applied with OpenRecovery, will automatically format(factory reset) your phone, as these has different signatures and cannot be used on top of this releas without factory reset.
Download http://dext3r.komodin.org/MotoFrenzy/MotoFrenzy-v05-FRF91-stock-theme-nosign.zipTheme - Nexus1 theme for froyo.
This theme is based on Modaco R21 release with chinese included too.
it has multilanguage support and france,germany,italian,portugese and some chinese(i cannot pronounce) as examples
hw keyboard light only works when "auto" light is disabled. (use power panel, so you can manage light if needed)Download http://rapidshare.com/files/410811694/MotoFrenzy-v04-theme-UDexteme5.0.1--nosign.zip.htmlTheme - UD Extreme 5.0.1 for froyo.
This theme is primarily "dark grey".
All credits goes to Ultimate Droid for the making of this mod, i just ported their Droid release to run on our milestone.
You should note, this uses an alternate launcher(PRO) and added functions(UDParts menu) into menus for configuation and as example DISABLE/CHANGE PREFERRED STORAGE for Market downloads, which we, with a 2.1 kernel can utilize. Please visit their site to see the pictures of this mod.
I have not have the chance to test all options of their menu functions but it looks promissing.Download http://rapidshare.com/files/410815633/MotoFrenzy-v04-theme-stock-theme--nosign.zip.htmlTheme - Droid FRG01 stock theme for froyo.
Original theme coming with 0.4 image. this is primarily just for easy restore.STATUS
WORKINGCamera
Bluetooth
GPS
Radio (GSM,GPRS,HSPA)
Wifi
SDCard detection
USB / ABD
AC Charging (milestone specific option)
3D games / full display support
Video playback (Youtube etc..)
Wipe
G-sensorNOT WORKINGVideo Recorder + camera focus/audio
INSTALLATION
FULL Images are copied to the SDCARD into /nandroid/adbrecovery folder, and installed from your OpenRecovery menu.
Patches are copied into the /OpenRecovery/updates folder, and installed from openrecovery menu.
Radio Band Requirements for different countries
Some countries require the original 3G files of your current ROM to work ie. Canada, Brazil, Venezuela, Germany and some others countries uses a different band for 3G. If u dont backup the 4 original 3G Files and restore it over this nandroid once installed u gonna have poor signal, sms problems and HSDPA loss (even if u set apn and get conection its gonna be crappy one).
Files should be in the /system/etc/motorola/bp_nvm_default/ of your phone.
Files can only be copied from OpenRecovery , using adb shell.
Latest v0.5 has builtin install option using GScript , so you can get the radio replaced/installed. without update zip files.
You might check this thread , if a update-nosign.zip file exists for your model. which makes it easier for you to install.
Filenames are:
File_Audio
File_Audio2
File_GSM
File_Seem_Flex_Tables
generic_pds_init
Changelog history
v0.52: 13-09-2010- native froyo apps2sd now working, thanks to Nadlabak on his work on this. you can call it a preview of his cm6 release looking forward to it.
- location fix, mistakenly updated complete gapps update, but not compatible with our milestone.
- vpn correction.. (thanks to Pooyan for supplying the account to verify it with)
- adobe flash removed (download and add externally, the enabler i made is not working)
- youtube,twitter,maps,voice updates possible in this version (problem related to gapps update)v0.51: 11-09-2010
- updated google apps so updates are possible.
- added missing flash apk. (use gscript to activate)v0.5d: 10-09-2010
- Deodex'd framework.. added custom circle battery stats + E/3G baseband icon.
- DLNA + Files apps (original from MotoBlur) included.
- "Files" it makes it possible to copy from/to/between windows fileshare.
- DLNA service is for now still testing- replaced battery stats lib..
- corrected /etc/gps.conf , added google info + Europe NTP services.
- fixed libril driver (earlier version had problems)
- added notification information onscreen, when shortcuts are used.
- re-enabled panic daemon reboot, if/when a process fails (such as radio process)
v0.5c: 28-08-2010- Added Ext2 filesystem check before mounting.
- init.rc changes
- New Keyboard shortcut functions (hold all 3 keys to activate)
- Spotlight switch (LEFT SHIFT + A + DPAD CENTER)
- hw keyboard light switch (LEFT SHIFT + A + L)
- Disable apps2sd (LEFT SHIFT + A + U)
- Enable apps2sd (LEFT SHIFT + A + T)
- start adb (LEFT SHIFT + A + X)
- restart RIL(phone driver) *TEST* (LEFT SHIFT + A + SPACE)
- copy all downloaded apps to sdcard (LEFT SHIFT + A + P)- Latest Overclock module + app (v1.4) and is now activated (550Mhz) even if no "overclock" file is found on /sdcard
v0.5b: 23-08-2010"Call waiting" has been fixed.v0.5a(a): 22-08-2010blue led startup fix + usb fix + GScript app + apps2sd ownership mount fix.v0.5: 21-08-2010Release updated to FRG22 (official Droid OTA release)
Apps2SD ext2 partition supported (no more need for use_apps2sd trigger)
Fixed data signal icon to show E/G/H types
Added GScript script options for ease of use.
- Included overclock file creation (Default 550Mhz)
- Baseband installation option (several countries included)
- Switch GoogleEmail app (Exchange policy on/off)
- See space free on EXT2 sdcard partition (partition2 only supported)
- switch build.prop (Nexus1 and Droid)
Corrected hw keyboard link, so G.O.T hw keyboard recovery should work now.
Dalvik cache now moved to /cache folder
Adobe flash 10.1.72 included seperately
v0.4: 03-08-2010Camera starting to work a little, but has FOCUS problemCompletely new rebuild with Droid stock FRG01BFlash 10.1 included as apk (push it to the phone with "adb"
its no longer possible to download with this release.
build.prop does not match.see bottom of this post for AudioEffect application, and download zip here.
Removed old changelog below v0.4, seems useless now...
the greetings
Nadlabak - compiling and testing native froyo apps2sd functionality.
Pooyan - getting vpn working
Fightspit - circle battery icon stats.
Anonymous - betas of images.
Thyrus - early versions testing with alternate framework
Luis - themes
OMG
this is for real !???
wooooww coool, now we dont have to wait the slowpoke motorola to release the froyo
keep working man
thank Dexter_nlb.
Nice!
Could someone host the file somewhere else, please?
Not working here, a warning appears and screen turns black.
Same here... warning screen flashed then nothing.
what a great job ! thanks
good news! thanks.
Flashplayer works?
Sent from my Milestone using Tapatalk
Wow that is great news, thank you very much.
Just one - F**k yeah, damm Motorola no need to release Froyo, we have Dexter_nlb
waiting for new release
Thanks!
so it worked?? I have ever opened a thread about not touching the kernel, but only upgrade the OS
amazed this is possible, i will try this
Amazing Work!
Hopefully we can build on this ;-)
wow!
how did you manage it with the bootloader?
you are my hero!!!!!!
barach said:
Flashplayer works?
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
Yes, Adobe Flash 10.1 Beta 3 works fine
FIXFILES for offline image - MotoFrenzy v0.1 missing dump files (5MB)
Sorry, but i was hoping that i could do without, but you prove me wrong here...
These fixfiles are for those that get the first image..the other image will be uploaded again with a all files included.
rapidshare is driving me nuts!! perhaps you could upload it somewhere else? thx!
yantz
yantz said:
rapidshare is driving me nuts!! perhaps you could upload it somewhere else? thx!
yantz
Click to expand...
Click to collapse
Mirror 2 - MotoFrenzy v0.1 missing dump files (5MB)
megavolt007 said:
Same here... warning screen flashed then nothing.
Click to expand...
Click to collapse
I come to think that you used WIPE after installing image?
There is a check builtin which checks if app files are missing,
was that the "warning" you saw?
thx a lot dexter! actually i was referring to the new image you were abt to upload thx once again
yantz
Related
READ FIRST - I am no longer updating my ROMs - details.
If you're following the Hero scene, you'll know that I have published a custom ROM based on the 1.73.405.5 shipping ROM. I have a Vodafone Magic (32B) and a T-Mobile G1 kicking around (and HTC want my PR review unit Hero back!), so figured it would be cool to firstly build a really simple way for me to package my ROMs for all 3 devices, and secondly try and produce an update.zip that runs on all 3!
Well, the first step is here, I have the MoDaCo Custom ROM ready to install on your Sapphire 32B device (and a 32A version is available to test).
Things you should know...
- Contents are IDENTICAL to the MoDaCo Custom ROM versions detailed here.
- I have used cyanogen's kernel from 4.0.4 (big respect to cyanogen, he's doing awesome work!)
- Now compcache ready - use this script for a big performance boost!
It has room for improvement, but it runs really sweet already IMHO!
The download link (in update.zip format for flashing in the usual way via recovery image) is at: http://android.modaco.com/content/h...-modaco-custom-rom-hero-to-sapphire-32b-port/
I've packaged Cyanogen's 4.1.11.1 BFS enabled Kernel and wlan.ko as an update.zip too (see above thread) - nandroid backup before applying!
I've quoted some of my original Hero post here, so you know what you're getting. Enjoy!
P
Changelog
2.2.1 [32A only]
32A - fixed boot.img
2.2
Fixed SU and SD card bugs.
2.1.2
Updated busybox
Now compcache ready - use this script for a big performance boost!
2.1.1
Switch to Cyanogen's kernel
Fixed G-Sensor / Compass
Fixed sound
Unified Dream / Sapphire 32B download
2.1
Initial Release
me said:
This ROM is based on the Generic 2.73.405.5 release version of the 'new update' (together with my own optimisations) for the best possible performance! The ROM is now available in 2 versions - 'core' and 'enhanced' by popular request.
Included in both 'core' and 'enhanced' versions
- Rooted with 'adb remount' permission and superuser APK
- A2SD included (fully automatic - thanks cyanogen!) - create a EXT3 partition as your second partition to use. dalvik-cache remains on device. EXT4 is NOT supported.
- Added Jbed Java
- Added Spare Parts (run it and switch the 2 animation types to 'fast' for an even better experience!)
- Added Custom Locale for setting non english Locales
- Added android-wifi-tether 1.52 (props to the developer, this is a great app!)
- Added WMSM
- Added busybox 1.15 - tweaked such that 'get information' in Swapper now works as desired
- Added nano 2.09 - text editor for use in shell mode
- Added terminfo and settings to boot.img to allow nano etc. use
- Added tun.ko file (untested, please report on whether this is useful)
- Added files required for Debian linux
- Moved Quickoffice to data partition to allow easy uninstall
- Deleted 'Learn More' application
- Deleted Maps application - install from the Android Market to always stay up to date
- ROM now includes touch focus in Camera app
- ROM now supports shortcuts using BetterCut (and therefore I assume anycut!) in Rosie
- Silenced boot sound (it's still there and can be reactivated with a file edit)
- You can now check your MoDaCo Custom ROM (MCR) version from the about menu. It will display MCR2.0 (core) or MCR2.0e (enhanced).
- Fix for HTC Peep on Vodafone now available here!
Included in 'enhanced' version only
- Added Business Card Scanner
- Added 'Plurk' client
- Added WAP browser
- Added Chinese IME
- Restored Maps app (for users who cannot install it from the Market)
Click to expand...
Click to collapse
Is this ready to go as far as elimintating the blurry screen AND wifi ??
Just asking as the 1.5 and 1.51 both gave me fuzzys, and applying the update eliminated the fuzzys but took away wifi !
Either way. Thank You SOOO much I knew if I waited you'd give us something nice for the holiday !
You think a wipe would be needed going from 1.51 to 2.1?
Gimpeh said:
You think a wipe would be needed going from 1.51 to 2.1?
Click to expand...
Click to collapse
to avoid any possible issues, I'd suggest a fresh wipe. I didnt add to much after the last rom I flashed so im gonna start over with my sdcard as well
A wipe is always wise, but SHOULDN'T be necessary...
P
Going to try this one now. How is the bluetooth support? Can paired headsets now actually work when calling?
re: support for ANYTHING other than WiFi and Camera (which both work), I don't know!
Let me know stuff that doesn't work, and i'll try to fix it in the next version.
Consider this a starting point...
P
For 32A I recommend the 2.6.29 kernel that redglasses uses on his Hero ROM:
http://www.2shared.com/file/7555649/5881ee4a/myhero-110.html
Might be stuck, d'oh!
So far, did a nandroid, wiped, etc. Updated, rebooted, and after asking for the language and network settings it's sat at a blank screen for some time. Status bar at the top, if left alone and hit the call button the dialer will appear and afterwards you'll see the unlock screen. But it just unlocks back to a blank screen. :/
So far this is the first ROM I've run into that's done this interesting bit. Will maybe reformat SD Card and rewipe, or something.
Nevermind. Rebooted, and it somehow proceeded this time around. Strange, though :/
dont really care for blutooth sound, but will it work for wireless tether ?? thats what I miss from using non hero roms.. having wifi back is also nice !!
Success!
Only noticeable thing is that when you go to far away from the home screen (going into settings, the dialer, etc), and return, it has to reload again for about 10 seconds. But once it's there it's fairly snappy.
Bluetooth pairs and works like it should! I might just hold onto this version of the ROM and tinker with it for a while.
ZiBop said:
Success!
Only noticeable thing is that when you go to far away from the home screen (going into settings, the dialer, etc), and return, it has to reload again for about 10 seconds. But once it's there it's fairly snappy.
Bluetooth pairs and works like it should! I might just hold onto this version of the ROM and tinker with it for a while.
Click to expand...
Click to collapse
have u messed with the swap yet ? 64/60 should help with that or 96/60 perhaps
i just flashed this and still am getting the fuzzys !! grr,, guess i have to flash the update over the rom and loose wifi ??
Modaco if you could shed some light it'd be much appreciated !
WiFi, etc works. Other problem : G Sensors aren't working D'oh
BRAND1SH said:
have u messed with the swap yet ? 64/60 should help with that or 96/60 perhaps
Click to expand...
Click to collapse
My swap's a bit rediculously larger. It's not that bad a lag, but only really noticeable when going back "home" from an application.
No swap or compcache etc. out of the box yet, let's fathom out the best settings together!
P
I'll upload a 32A version for someone to test...
P
modaco said:
No swap or compcache etc. out of the box yet, let's fathom out the best settings together!
P
Click to expand...
Click to collapse
modaco,
I am having all kinds of problems with this rom im still getting a blurry screen, it froze on me 3 times, im stuck in portrait and i keep getting the htc loading screen. I downloaded the file twice to eliminate possiblity of a faulty download as well.
mytouch...amonra 1.2.1, ext3. might have to go back to 1.51 that one worked great
I can confirm that this is running beautifully on my 32A device using redglasses/myhero boot.img and wlan.ko.
Seems to be significantly faster than the 1.73 builds, thank you modaco! Now you just need the 2.84+ build as well
I'm pleased to present my MoDaCo Custom Hero ROM for the CDMA Hero! No wipe is required for this ROM.
You can now create a customised ROM containing only the parts you required - click here to read more about the MoDaCo Custom Custom ROM online kitchen!
MCR now optionally includes Wavesecure in ROM, allowing you to lock / locate / wipe your device remotely in the event of loss and be notified if the SIM is changed. The application cannot be uninstalled by a thief and we are actively working with Wavesecure to ensure that in a forthcoming release, your settings will survive a hard reset!
This ROM is based on the updated 'MR' ROM release series (together with my own optimisations) for the best possible performance! The ROM is packaged as a core version with optional add on packs.
Included in the 'core'
- Now includes a MoDaCo Custom Kernel 1.2 with EXT3/4, Compcache support, extended iptables support, NFS/CIFS, tun module and much more! To enable compcache, use the kitchen or edit /system/init.d/compcache.sh- Built with my new MCR build process which reduces size and boost speed of the ROM
- Rooted with 'adb remount' permission and superuser APK
- A2SD included (fully automatic - thanks cyanogen!) - create a EXT2 partition as your second partition to use. dalvik-cache remains on device.
- Added Jbed Java
- Added Dropbear SSH running by default, check 'About' screen for password (port 2222). You can now remove this by running /system/bin/removedropbear.sh
- Added Notes app from Dragon
- Added Spare Parts (run it and switch the 2 animation types to 'fast' for an even better experience!)
- Added WiFi Status indicator, with kind permission of Andrew Schwimmer
- Added busybox 1.15.3 with Droid Explorer support
- Added nano 2.09 - text editor for use in shell mode
- Added parted and sqlite tools
- Added terminfo and settings to boot.img to allow nano etc. use
- Added files required for Debian linux including loxley's updated bootdeb script
- Added all 4 available HTC widgets
- Moved Quickoffice to data partition to allow easy uninstall
- Moved Google Maps and Google Voice Search to data partition to allow easy update
- Deleted 'Learn More' application
- Silenced boot sound (it's still there and can be reactivated with a file edit)
- You can now check your MoDaCo Custom ROM (MCR) version from the about menu
Included in main 'enhanced' add on pack
- Added Business Card Scanner
- Added WAP browser
Other optional add on packs (apply as normal update zips)
- 'WaveSecure' add on pack (puts Wavesecure in ROM - it is no longer in core)
- 'Boot Sounds' add on pack (restores boot sounds)
- 'Hebrew Fonts' add on pack (installs hebrew fonts)
Recommended applications (available from the market)
- More Locale for setting non english Locales
Downloads
http://android.modaco.com/content/h...n-2-0-modaco-custom-rom-for-sprint-cdma-hero/
ENSURE YOU DO A NANDROID BACKUP SO YOU CAN 'ROLL BACK' IF REQUIRED!
Please note that first boot may take a little while, especially if you have a lot of apps on your A2SD partition. Be patient! If you want a real clean start or you have issues with your existing A2SD installed apps when you boot, you need to wipe your EXT2 partition on SD too by executing 'adb shell rm -r /system/sd/app', 'adb shell rm -r /system/sd/app-private' and 'adb shell reboot'
The ROM is in an update.zip format for installation via the custom recovery image.
For the complete newbies, these are the steps you need to take with a 'virgin' Hero:
- Download and install (via rooting) the patched recovery image (step by step guide to follow)
- Download this custom ROM, and copy it to your SD card
- Enter the recovery image (if you're not in it already) by powering on while pressing 'home'
- Select 'nandroid backup' from the menu to do a backup
- If you copied the custom rom as update.zip, select 'apply sdcard:update.zip', else select the option below.
- all done
Feedback / feature requests welcome! This ROM is posted in multiple places - although I try to provide support everywhere the ROM is posted, of course you will receive the quickest response at MoDaCo.
Finally, if you like the MoDaCo Custom ROMs, consider supporting MoDaCo by visiting the subscriptions page and upgrading your account.
P
Changelog
2.2
Now includes a MoDaCo Custom Kernel 1.2 with EXT3/4, Compcache support, extended iptables support, NFS/CIFS, tun module and much more
2.0.1
Updated Wireless Tether application
Updated Wavesecure application
Fixed boot sound timing in boot sounds restore option
2.0
Based on shipping MR update
Updated Busybox 1.15.3 adds support for Droid Explorer
All 4 available HTC widgets are now included in ROM
Built using the new MCR build process for improved performance
1.1
A2SD mounting bugfix
1.0
Initial Release
I wanna install but http://content.modaco.net/hero/1.0-update-heroc-modacocustomrom-core-signed.zip gives 404.
they should make a video to root and install this custom rom am clueless.... not even reading
CDMA
Congrats on releasing the first ROM for the Sprint Hero! Will try it out tonight.
I am soo scared to try. I have it rooted with a recovery image and flashing is no problems for me but this being the first. YIKES!!! Your one of the best in the game, but like my dad would tell me ARE YOU CRAZY!!! If i hear good news i am on board.
willing to take the plunge, but core link is broken.
*edit* Link is working! Here goes nothing!
downloading now!! I will give it a try.. Oh and the link works now
~Fearless~
Link fixed.
OBVIOUSLY, Nandroid backup first.
P
Thank you Modaco! Thank you! I can't develop roms! lol. Not good at it apparently. Are you still uploading it though? Getting a 404. Soon as I download it I will be proud and happy to be a guinea pig.
Ignore my last post. Downloading now. Will let you all know how it works.
As I said in the first post, I have no CDMA Hero to test on, so we might need a few builds before we get any issues ironed out... we'll see!
P
modaco said:
Link fixed.
OBVIOUSLY, Nandroid backup first.
P
Click to expand...
Click to collapse
Is it you or am I an idiot? Still gives file not found...
Installing now... you said don't do a Nandroid Backup if you're brave right
ok!!!!!!!!!!! balls to wall!!!! downloading now. wish me luck
Haha, no, everyone should ALWAYS have a backup plan...
P
Darth Pooh said:
Installing now... you said don't do a Nandroid Backup if you're brave right
Click to expand...
Click to collapse
Nandroid backups are for sissies! Well... Sissies who have working phones at least. Proud to be one Flashing now baby!
Hey guys, can you post a vid or pictures of it working? If we need more testers I will hop on bored. I know a few of us have heros that have diferrent build dates.. may or may not affect it
i know this is kind of a noob question. but here it goes. are my contacts and such gonna be errased?
goku14238 said:
Hey guys, can you post a vid or pictures of it working? If we need more testers I will hop on bored. I know a few of us have heros that have diferrent build dates.. may or may not affect it
Click to expand...
Click to collapse
I'll have to leave soon to see family but if I get a chance I will take screenshots.
OpenEclair is a community ROM based on the AOSP 2.1 source code (with lots of Cyanogen mixed in).
The goal of OpenEclair is to bring to the community a fast and stable Eclair 2.1 ROM, with contributions from numerous ROM developers.
Contributors
Developer - Wes Garner - Twitter
Developer - ctso - Twitter
Porters - Brian Cook, Piotr Maksymiuk (Movi)
Complete OpenEclair Credits List
http://short.to/18h0a
Bandwidth - A HUGE thanks to Simon, Allen, and everyone from AndroidSPIN for hosting the ROMs!
Click to expand...
Click to collapse
Features
- AOSP 2.1r2 Eclair
- Multiple Kernels
- Live Wallpapers
- CompCache/Swap via SpareParts (including size!)
- Swap via SpareParts
- Supports G1/MT3G
- Automatic Apps2SD on G1
- 5 Screen Launcher and Launcher2 from NexusOne
- New Customizable MMS
- WG-Kernel 5 v0.8
Click to expand...
Click to collapse
There has been more and more work done on OpenEclair even though this release is small, there is much more to come. If you want to donate, please do - that really does give us encouragement to spend so much time on this
Donate to Wes Garner
Donate to Chris Soyars
Downloads
OpenEclair v1.3.0.1
Download:http://androidspin.com/forum/showthread.php?t=2296
Note: Before posting an issue in the thread, please check the issue tracker, as we probably already know about it!
Click to expand...
Click to collapse
Issue Tracker
Before posting an issue please do your best to make sure it has not already been reported. A good idea is to check the "Known Issues" section below.
Issue Tracker on Google Code
Please post all issues in the Google Code Issue Tracker. This thread can be a great area for support, but any bugs should be reported at Google Code so they do not get lost.
Thanks!
Click to expand...
Click to collapse
Disclaimer
We are not responsible for bricking your phone! Also, this is an open source project, but please give credit where it`s due and please do not post our full builds without asking. We would also love to know if anyone is using our ROM on other devices!
Click to expand...
Click to collapse
Known Issues:
- LWPs break when using 3D Kernel
- Userinit is still being overridden by SpareParts
- CompCache changes in SpareParts require reboot
- Video still not working
- Menu to unlock is not enabled
- Phone app's on-screen touch buttons may cause problems
Click to expand...
Click to collapse
Change Log
OpenEclair - v1.3.0.1 - 04/02/2010
- Fixed Framework bug
OpenEclair - v1.3.0 - 04/02/2010
- WG-Kernel 5 v0.8:
* Completely fresh and clean
* Fixed Bluetooth
* Has option to use 3D or RAMHack
* Updated WiFi Drivers to help battery life
- Does NOT require DangerSPL (also fixes install errors)
- Fixed CompCache problems where would not load or would require reboot
- Fixed issues with Su
- Removed all the duplicate ringtones (may have to reset your notification and ringtone sounds)
- Fixed GenieWidget
- Fixed Market troubles
OpenEclair - v1.2.2 - 02/25/2010
- New version of kernel with serious SPEED INCREASES
- DangerSPL not required
- Fixed CompCache/MemCtl (keep in mind, userinit is still being overridden and changes require restart)
- Amazing BootAnimation by MINUS_Stl
- ALL LWPs should be working now (including Smoke)
- Facebook Sync is fixed
- Added latest Google Maps 4.0
- YouTube app is there, but there is no video support yet
- Random Apps disappearing should be fixed http://short.to/18we3
- Bouncy Menus and other visual fixes
- Fixed all APN bugs causing no data
- Added WiFi Tether
- Latest Phone.apk by Cytown / Contacts.apk by Wysie
- Added all EXTfs binaries
- Many bug fixes fixed from Google Code
- Latest AOSP Merges
- Other changes that can't be remembered
OpenEclair - v1.2.1 - 02/13/2010
- Please wipe. (though may not be required)
- Multiple kernels to select from -- BFS/CFS, 10mb RAM Hack or not
- Nexus One OTA Update (Android 2.1_r2)
- MT in Browser
- Fixed disappearing icon issues.
- Fixed LWPs (Except for Smoke LWP)
- Includes Launcher2, to use select "Launcher" instead of "Home" when prompted.
- LWPs are interactive while using Launcher2, though slightly buggy.
- New MMS Settings: 600kb MMS Size Limit, Max Resolution is 2048x1536, Text will not convert to MMS until 10pgs has been reached (versus 4)
- Includes HTC_IME
- Fixed Camera from the Beta`s
- Includes latest WG-Kernel v3-beta
- Include Meltus`s AudioMod v2r2
- Removed: Eugene`s Overclocking
- More that neither of us remember
OpenEclair - v1.1.5 BETA - 02/08/2010
- No Wipe
- No you did not miss 1.1.2, 1.1.3, and 1.1.4. They were test builds.
- Kernel: CPU Frequency modifications by Eugene
- Kernel: Overclocked to 580MHz by default.
- Kernel: Bug fixes from Nexus One MSM Kernel
- Compcache: Upgraded to v0.6.2
- Added MT Maps from Nexus One update
- Dalvik Changes (JIT is extremely unstable, switched to donut dalvik for now)
- Firstboot script changes
OpenEclair - v1.1.1 BETA - 02/02/2010
- Reverted JIT (No longer using JIT - causes too much instability)
- Added EXT tools.
- Readded DangerSPL Requirement
OpenEclair - v1.1 BETA - 02/01/2010
- New Apps2SD (disables Apps2SD on MT3G)
- Added Passion Google Apps
- Fixed "insufficient storage" issue.
- Switched to WG-Kernel
- Optimized Launcher (thanks dumbbestcrayon)
- Fixed Music button on Desk Clock
- Removed DangerSPL requirement
- Added Swap settings to SpareParts
- Default compcache size set to 32MB
- Fixed keystore errors.
- Added rwsystem/rosystem
- Fixed "pm: not found" errors.
- Complete recompile from AOSP/Cyanogen
- Removed CM Updater (will be added again in a future release)
OpenEclair - v1.0.1 - 02/02/2010
- Fixed "insufficient storage" problem when installing apps.
OpenEclair - v1.0 - 01/28/2010
- Initial release based on Intension v1.4.0.
Click to expand...
Click to collapse
[reserved for space]
- Video/3D still not working - expect Video in 1.3
How so?
sounds good, after so much flash withdral, now all these roms
this, superd, and hero eclair!!!!!!!!! in two days
EDIT, wow I never noticed that I have the second post in this amazing topic
Damn it man... I was watching the Cleveland/Boston game and thought "I wonder if anyone released any updates?" I didn't exactly expect to see much, but now i'm going to miss a chunk of the game because I want to flash this and play with it.
Damn you guys and your badass ROM releases. Damn you! LOL
(thanks for this though, been waiting to see what you guys were putting together for the update)
Is it possible to have the Menu key to unlock changeable via Sapre Parts?
I really like the option where i have to swipe.
Also im also very curious on how 3D/Video is being accomplished
root explorer and sufbs force close in openeclair. any solution?
sagementor said:
root explorer and sufbs force close in openeclair. any solution?
Click to expand...
Click to collapse
Root explorer not working is a known issue, however SUFBS seems to work fine on my end. Also worked on all of the betas for me.
staticshadow said:
- Video/3D still not working - expect Video in 1.3
How so?
Click to expand...
Click to collapse
Wait and see Wes will work his magic, when he has a chance. Just give him some time. We also gotta work out BT in this build as well, so there are a few kinks to iron out still. Wicked fast though
The boot screen made me "lol"
I wasnt expecting that. Looks neat though
the background of the boot screen is scaled up from a low-res image, does not look as good. it repeats too much and a bit annoying to keep a big bright screen for so long.
So what happened between 1.2.1 and 1.2.2 to break bluetooth?
Hey guys, first time OpenEclair user, long time Cyanogen user.
So I'm trying to flash this ROM, but I'm getting this error
Code:
copying files...
E:Can't symlink /system/xbin/bb/dirname
E:Failure at line 73:
/system/xbin/busybox SYSTEM:xbin/bb/dirname
I googled for it, and found some folks talking about symlink issues, and people said it had to do with formatting the SDcard. So I repaired mine using Amon_Ra's recovery image, and tried again, but no dice.
Help?
toekneebullard said:
Hey guys, first time OpenEclair user, long time Cyanogen user.
So I'm trying to flash this ROM, but I'm getting this error
Code:
copying files...
E:Can't symlink /system/xbin/bb/dirname
E:Failure at line 73:
/system/xbin/busybox SYSTEM:xbin/bb/dirname
I googled for it, and found some folks talking about symlink issues, and people said it had to do with formatting the SDcard. So I repaired mine using Amon_Ra's recovery image, and tried again, but no dice.
Help?
Click to expand...
Click to collapse
I haven't had this issue and I am a long time Cyanogen User also. I always wipe everything... factory reset, dalvik, and ext using Amon_Ra's recovery image. I have been jumping back and forth flashing different roms and I have yet to have an issue.
OK, here's what I did, step by step:
-Extracted the OpenEclair 1.2.2 zip onto my SD card (I realize this was wrong)
-Wiped data and Dalvik via Amon_Ra's recovery image
-booted into cyanogen and opened terminal emulator
-flash_image boot /sdcard/boot.img
-reboot
My phone restarts, and hangs on the TMobile G1 Screen
-I reboot into recovery, and realize that you can install from zip files. I realize my first mistake of unzipping the file.
-I pull my sdcard and download the openeclair file again, and place the zip file on my sdcard. I carefully remove only the files I unzipped from the OE zip file, knowing that the "apps" folder had some files in there already, so I left those.
-reboot, recovery, install zip from recovery
That's when this error shows up. So I back up, pull the SDCard again, download the latest Cyanogen and try the flash it. It installs fine, but now when I reboot my phone hangs on the TMobile G1 screen.
****.
So I do a Nand restore, and the phone boots into really old android that came on the G1. yikes, but ok. So I try and install OpenEclair now, via recovery image, same error. I install cyanogen, and my phone again hangs at TMobile screen.
Help?
toekneebullard said:
Help?
Click to expand...
Click to collapse
All I can think of is that you may not have waited long enough when on the G1 screen. It can take a really long time to get to the splash screen.
The real reason I'm posting now is to say congrats to the devs. This ROM is a winner. I only ran it for a few hours because I rely heavily on bluetooth, but I still enjoyed it enough to recover my TI backups, rearrange my home screen shortcuts and even make a nandroid backup. I'm recovering my OE 1.0.1 nandroid backup as I type, but I cannot wait to see 1.2.next with working BT. So Chris and Wes an anyone else working behind the scenes: get enough sleep, take your time, I'll keep watching you on twitter to see when the BT fix is ready. I'll see if I can pull together a little beer money while I wait.
revwillie said:
All I can think of is that you may not have waited long enough when on the G1 screen. It can take a really long time to get to the splash screen.
Click to expand...
Click to collapse
Yeah, but 30 minutes?
toekneebullard said:
Yeah, but 30 minutes?
Click to expand...
Click to collapse
that's probably long enough. I guess you should just start fresh with full wipes and reflash. I used to hate it when people told me to do that, but I'm a Titanium Backup user now.
No boot problems
Hello toekneebullard. If you sdcard isn't properly formatted with linux-ext-swap, it can cause a no boot situation. It should go like this: Fat32 / Ext3 - 500mb/ Linux-Swap 128mb. This setup will work for most ROMs with or without swap. Regards
It is built from cyanogen port from kabaldan. Synced on 21/3/11
This is the pre-final build with lots of changes and tweaks.
Here it is now for all CM6 lovers.
Donate if you like my work.
Change log (21-3-11)
Updated sources
New kernel (rare DSI errors)
Updated memory tweak.
Nexus S LW's are back.
MiUi camera added.
Moto Blur animations added.
Motorola Atrix sounds and notifications added.
Under clocked to 700 MHz.
DalvikVM changed to 42m.
WiFi scan to 160
Genie Widgets added back.
Many apk's updated.
Framework-res optimized..
Launcher pro added.
Honeycomb walls added.
Proprietary files update
Various wlan connectivity issues fixed (some N routers, wpa2, 801.x enterprise etc.), as in current CM7
Mods and tweaks-
AOSP Music/MusicMod 1.75.2 Built from Eliot Stocker source
ADBD-on boot
Reboot Menu in PowerMENU (with reboot to recovery, normal or bootloader)
Dalvik heapsize: 42m--dramatically improves performance!
windowsmgr.max_events_per_sec=60-> scrolling is smoother!
Hacks in media_profiles.xml:
Hack recorder at 30fps
hack bitrate audio / video
Camera Hack ---> Compression set to 100 (no compression) and increased memory footprint, the picture gains! (And thanks to the new gallery seems a different story!)
4 POINT MULTITOUCH SUPPORT FOR MILESTONE- abilited by a little hack in build.prop
media_profiles.xml adjustments (safer high camcorder profile h264 bitrate) + small camera fixes (sounds etc.) (thanks to kabladan)
- small agps fix (issue 295) "
- multitouch.distinct defined (fix Google Maps 5.0 rotation gesture etc.) "
- bluetooth discoverabilty timeout configurable (thanks H.Czedik) "
- modversion change to easily distinguish current build "
- etc.
- AAC and AMR Wideband audio encoders are finally working! "
- additional video quality camcorder profile added - "middle" (customize it in /etc/media_profiles.xml) "
- Camera app - fixed encoder change from UI not being used until camera reinitialization, camcorder shortcut added "
- adjusted smartass governor defaults "
BOOT SCRIPTS-
The script that will start to boot, are located in the /system/etc/init.d, and are simple script with no extension (info for whoever want to add / edit the script)
1-Sysctl-support tweaking the kernel! instead of creating a script where you write tweak using "sysctl-w" now using "sysctl-p" reads the sysctl.conf file in /system/etc
Zip align script.
Auto boot recovery.
4-Overclock-overclock the cpu+ memory tweak
5-adbd_during_boot-adbd to boot the adb shell directly as root! (updated)
Removed lots of bloat-ware to make it fast and smooth!!
Lots of other tweaks under the hood!!
Important:
Please, use the new OpenRecovery 1.46 for installation.
The Androidiani OR has been updated to be based on 1.46 (in version 3.3), so it's recommended too.
Non European radio files can be installed from menu in Androidiani OR.
Download-
Code:
http://www.androidnerds.net/forum/viewtopic.php?f=502&t=102
Google Apps should be download from here-
Code:
android.d3xt3r01.tk/cyanogen/gapps/gapps-hdpi-20101114-signed.zip
New market (2.2.11) for iceandfire rom (Thanks to HO!NO!)(I did a little modifications to his market update)
Download this update file new_market.zip and traditional_market.zip
copy them in openrecovery update folder
Go Settings > Applications > Manage applications and click on the Running tab.
click on Google service framework, Force stop it and clear data and cache
go back in all tab and click on market, do the same (Force stop clear data and cache.
reboot in recovery
install traditional_market update
wipe dalvik cache and cache
reboot
open market (accept User Agreement) close program (do not wait for program to open)
reboot in recovery
install the new market update
reboot
and now you should have the working new market 2.2.11!
Code:
http://www.multiupload.com/2XOMDYB5AV
http://www.multiupload.com/B8AE2AKTKQ
Theme pack-
Note- Install ADW launcher to use these.
Package includes-
1. tron
2. gingerbread
3. gingerbread blue
4. MIUI
5. Symbian
Ill Update more when i get'em!!
http://www.multiupload.com/YVQF4UQRCI
Gingerbread theme(thanks to sileshn)-
Code:
http://forum.xda-developers.com/showthread.php?t=928678
Gingerbread theme from iceandfire v1.0.1-
Code:
http://www.multiupload.com/9XM0MXQNTK
MiUi music for iaf roms-
Code:
http://www.multiupload.com/LR4YAKL8NL
iceandfire rom v1.0.2 theme- (thanks to loveboatcaptain)
http://www.multiupload.com/BCHGJLL62N
Downloading and will report back in a few hours.
Great! Its looks fantastic! A mix of CM and FryoMod!
Thank you! Just a little request: Could you set your rom up to be SBF-less? As any other 2.2 roms out there is since 1 month ago... Thanks in advance
marcelus said:
Great! Its looks fantastic! A mix of CM and FryoMod!
Click to expand...
Click to collapse
anyway,seems very complicated.
thank you.
what's the diff in this rom and cyano/froyomod rom?
Removed many bloat ware.. Some under the hood customizations.. gingerbread theme pre-installed!! some tweaks from both CM/froyomod and some other nexus one and htc roms!!
Can anyone tell about battery backup...... coz there is not much battery backup in modified roms as process keeps on active even phone is locked and consumes more battery....... is there any method to stop them plz tell....
Check it again it is there how to fix that...
Sent from my Milestone using Tapatalk
Is the launcher2.apk.1 a leftover? Same for the Music.apk.1
because it is easily taking up around 4 megs of space.
looks good
Ill test this rom and report back tomorrow bro
In other words you have choose the best of both rom.
Ifiuse said:
In other words you have choose the best of both rom.
Click to expand...
Click to collapse
Yes but added and removed some stuff too..
Sent from my Milestone using Tapatalk
Ummm...did you read my post?
Great rom but the batterylife sucks. I know the reboot trick but its still bad. I'm going back to Telus mod.
bloodhawk said:
Ummm...did you read my post?
Click to expand...
Click to collapse
actually that came with sync.. so i cant really say anything about it!
DrZippit said:
Great rom but the batterylife sucks. I know the reboot trick but its still bad. I'm going back to Telus mod.
Click to expand...
Click to collapse
Thats the problem with LEAKED kernal so i cant really help about it and ya even CM is a batttery hogger!!
iceandfire said:
actually that came with sync.. so i cant really say anything about it!
Click to expand...
Click to collapse
As in?
because both these apps are taking around 8MB of internal memory...
I did delete them.. without any issues. So it would be better if you delete them from the next release. To add some more space
bloodhawk said:
As in?
because both these apps are taking around 8MB of internal memory...
I did delete them.. without any issues. So it would be better if you delete them from the next release. To add some more space
Click to expand...
Click to collapse
The next release is AOSP based and already in works, ill take care of these two files and others!!
kallt_kaffe said:
About RELEASE
This is a custom ROM based on the Japanese Softbank 003Z ROM.
IMPORTANT! Everyone must wipe data/cache when updating to RLS8. Even if you tried RLS7.5 (sorry but I signed some more stuff after RLS7.5 so a wipe is needed)
Downloads
Japanese_Jellyfish_RLS8.zip (for normal Clockwork install) (119.2Mb system) MD5: 3C36CD940E7EBF5DC756C565D7633929
Japanese_Jellyfish_RLS8_image.zip (for repartitioning and install) MD5: B6F214EA40EA7E5D3B02F3D4FDC681F7
Japanese_Jellyfish_RLS8_ahb_overclocked.zip (50% AHB bus overclocking at speeds above 600MHz addon) MD5: DACD6FA2181566372DF9746EF0A7BE52
Japanese_Jellyfish_RLS8_hw_ui.zip (Addon to enable hardware accellerated UI) MD5: 2152941B56D4D8869B75BEDD92924022
Japanese_Jellyfish_RLS8_circle_battery.zip (Addon to enable circle battery indicator) MD5: B543098663F78584D301E9D7FC9321DB
Japanese_Jellyfish_RLS8_deskclock.zip (Addon to replace Alarm Clock with Desk Clock) MD5: FBBEB626B5E06D7EEF2097844C6525FB
Japanese_Jellyfish_RLS8_blueish_kbd.zip (Addon to change orange to blue on G-bread kbd) MD5:27B4C271657B42C0A52B10FDF4611979
Japanese_Jellyfish_RLS8_smartdialer_addon.zip (Restore Smart Dialer and RLS7 version of Contacts) MD5: 6C3EA10C177ADFC8A60926084D2D3C67
Installation
Use Clockwork Recovery 2.5.0.9 or 2.5.1.3 or 2.5.1.8 to install the ROM and addons. Remember to Wipe data/cache when installing the ROM. No wipe, no whine...
It also works to use the RA_Recovery as an alternative to Clockwork.
LCD and/or Apps2SD user may want to try this Clockwork version where I replaced the kernel with my custom kernel so it supports EXT3 and the new displays: http://android.modaco.com/index.php?s=&...t&p=1501261
Changing system partition size to 128Mb and data to 286Mb(FOR ADVANCED USERS ONLY ON THEIR OWN RISK!)
Download the image version of the ROM and extract the "image" folder to the the SD-card.
Power off the phone and when powering on hold Menu and Volume-up
When some green text shows up saying it's installing a bunch of .mbn and .img files you may release the buttons and wait for it to reboot. (NOTE: I tried this on a TFT Blade and no green text was shown, just a black screen but after a while it rebooted and everything had worked like it was supposed to. Not sure if it was a coincidence or if TFT Blades doesn't show the green text)
NOTE! This also installs a bunch of firmware files from the Hungarian 256->512Mb update. It works fine on my OSF but do NOT blame me if it bricks your phone. You do not NEED to change partition sizes to use the "lite" version. It's just for advanced users who want to get more space for apps in /data. If this sounds confusing, then it's not for you.
Don't forget to rename or remove the "image" folder on the SD-card when you are done so that you do not reinstall your phone by mistake later on. Sometimes it enters the "image" install when you try to boot into bootloader mode if the image folder still exists on the card.
Go back to standard partition sizes
Repeat the above but with this "image" folder: http://www.mediafire.com/?xtckadj09b7sxt2 MD5: C8010D841AF463F3CB1FDEDFFAFA3B1E. After this you will have Clockwork Recovery as both boot and recovery image so you'll need to put a ROM on your SD-card and install.
RLS8 - 2011-01-18
Added VoiceSearch as it is not available in Market for some.
Added CIFS support to kernel.
Added a non-renamed Gingerbread keyboard (stolen from a Nexus AOSP build) so it's now called "AndroidKeyboard".
Signed everthing connected to framework-res.apk, Contacts.apk and Mms.apk with AOSP platform certs. This makes life eaiser for themers.
Enabled standard Dialer in Contacts.
Removed SmartDialer.apk.
Updated Mms.apk with the version from the now released Chinese V880 ROM (previously used Mms.apk from leaked V880 ROM).
Disabled AGPS by default. Not sure it makes a difference to turn it on and it seems to provoke some "Connection cannot be made" if enabled.
SmartDialer and RLS7 version of Contacts.apk (without dialer) as an addon.
Blue-ish Gingerbread keyboard as addon (using a selected part of modifications found here.
Updated RA recovery.img in "image" install (TPT) to Sebastian404s latest version.
Post RLS7 fixes (attached)
Facebook sync fixed
RLS7 - 2011-01-13
gps.conf back to pre-RLS6 version
resolv.conf removed (don't think it was used anyway and have only seen it in CM releases)
VPN menus enabled in Settings.
Automatic time setting enabled in Settings.
Signal indicators fixed (using same levels as in ZTE 2.1 ROMs)
Original Alarm clock back (has more options) but can be replaced with Desk Clock through addon if DeskClock is preferred.
Stock Filer app back as it can be good to have a simple file manager in place.
Removed lots of lib connected to the iwnnime (japanese IME) that was removed erlier. (Size of system is now below 120Mb)
Changed HH.MM time display to HH:MM in Danish, Norwegian and Finnish language files.
Added more PPP options in kernel (for VPN).
Circle battery indicator is no longer the default but can be added as an addon.
Added Sebastians RA recovery (with CM colors) to the "image" install as it supports EXT4 and also the addons needs a recovery image.
I'm sorry but it is NOT resigned with test keys as I promised it would be. I'm afraid resigning everything with testkeys can lead to problems when updates to "stock" apps like Gmail and Market arrives. This needs to be investigated further before testsigning the release.
Post RLS6 fixes (attached)
Fixed gps.conf
RIL libs for Saunalahti users to stop it from appearing to be roaming when it's not.
RLS6
Added Gmail back as it seems to missing in Market for some people.
Replaced AlarmClock.apk with DeskClock.apk.
Added resolv.conf with Googles public DNS-servers.
Added Googles SUPL host in gps.conf.
Disabled hardware GUI as eat seems to eat battery (enable with addon if you want it)
Changed wifi scan interval from 15 to 180 seconds (saves battery).
Updated apns-conf.xml with some changes found in CM 6.1.
Enabled EXT4 and PPP in kernel and changed kernel to use LZMA compressed initrd.
Removed the built in Japanese voicemail numbers.
Removed recovery.img from "image" install so that it doesn't overwrite any previously installed recovery images.
Removed the hacked "stock" FM Radio and updated Andorko's version to 0.5.
RLS5
No more bloating, only one super-slimmed version that fits on 128Mb system partition (more info and instructions will come later)
New kernel with overclocking support (Use SetCPU)
Added swap and compcache support.
Compiled and added tun.ko for the new kernel.
Re-added Google Search box.
Replaced MMS app with version from the chinese leaked ROM which supports adding multiple recipients.
Replaced libril-qc-1.so and libcm.so with versions from the Swedish Comviq ROM (previously used versions from the Finnish Saunlahti ROM).
(Saunalahti users should use the attached update so that it doens't look like it's roaming)[/url]
RLS4
Now also works without SIM cards (thanks to MDCFan)
No bootlogo, keeps Splash screen until bootanimation starts. Saves space in ramdisk and splash is rather easy to replace yourself compared to replacing the bootlogo.
Removed Nexus bootanimation and uses the default Android flashing logo.
Added ADW Launcher
Added Emulator ROMs
Added VM Heap tool (and changed VM Heap size back to the default 24Mb as you can now easily change it yourselves)
Turned off Stagefright. Stagefright are a new set of media decoders in 2.2 but they are broken in our release which is why it doubles the Quadrant Scores. It doesn't make the phone faster, just the benchmarks and it's just a illusion.
Changed default wallpaper.
Made a super-slim lite version that fits well within a 128Mb system partition (see "Partition layout change" thread and this post for more info.)
RLS3b
Removed libOmxAacDec.so and libOmxMp3Dec.so as suggested by Flibb to get rid of the random mp3 playing issues.
Put the new Settings.apk and SettingsProvider.apk into the right place so this time Tethering and Assisted GPS controls should be there.
RLS3
(native)Wifi Hotspot
USB tethering (mobile data or Wifi)
Enabled AGPS and the checkbox to control it.
Replaced Home Switcher with Froyo version
Included both working Radio apps (thanks to MDCFan and Andorko
Jellyfish got missing after a tragic misunderstanding at a sushi bar and have been replaced with green android and nexus bootanimation.
Updated Linpack to latest version.
IMPORTANT! The themes likely needs to be updated to support RLS3 or they will disable Wifi hotspot and usb tethering through wifi. Usb tethering over through mobile data should still work though.Frankish! The file that is chaned in framework-res.apk is res/values/arrays.xml. You can propably just get the whole resources.rsc from my framework-res.apk and put it into your framework-res.apk files. Just remeber to NOT use compression on the resources.rsc. Use WinRAR and choose "Store" when you add it.
RLS2
The USIM error on unlocked phones is now gone (thansk to MDCFan)
The Japanese extra call dialogue that some people experienced is gone.
Circle battery indicator
Removed APNDroid as it is obsolete with the new Power control widget.
Updated Titanium Backup
Removed the CKPD-daemon
Added Spare Parts
RLS1
Cleaned ROM from branding, custom contacts, bookmarks etc...
Added most of the extra stuff from Finnish Fillyjonk (Launcher Pro etc...)
Upgraded several Google apps and Market.
Unlocked all languages
Added Gingerbread Keyboard and made it the default IME.
Added Wifi tethering app as this kernel, as opposed to the 2.1 kernel, seems to have the needed netfilter stuff enabled.
Enabled hardware GUI accelleration, stagefright etc...
Known issues
Sometimes when an app request root permissions it just "hangs". Resolved by restarting phone or just kill all tasks with a Task killer.
Some phone companies "borrows" other companies networks and will show as roaming when it didn't with the stock ROM. In this case you need to replace libcm.so and libril-qc-1.so with the versions from your stock 2.1 ROM. Updates attached for Saunalahti and Yesss.
Click to expand...
Click to collapse
from blade.modaco.com
tested on optimus san francisco [TFT]
d/l link?
please add it
Have a look here
Already release 2:
Download
Get it here: Japanese_Jellyfish_RLS2.zip
Lite version: Japanese_Jellyfish_RLS2_lite.zip
50% AHB bus overclocking at 480 & 600MHz addon: Japanese_Jellyfish_RLS2_ahb_overclocked.zip
Click to expand...
Click to collapse
Loc-Deu said:
d/l link?
please add it
Click to expand...
Click to collapse
sorry
added
I found this thread in modaco with themes for this rom if someone like to use
http://android.modaco.com/content/zte-blade-blade-modaco-com/327826/themes-for-japjelly-and-sebs-froyos-new-revo-theme/
i flashed the RLS2... works fine for me
I've installed "Extended Controls" and if you install a USB Tether "switch" on one of your homescreens and connect your Blade to your windows pc with a USB cable and press the switch, USB tethering DOES work with this ROM. (make sure data = ON)
joooker16 said:
I've installed "Extended Controls" and if you install a USB Tether "switch" on one of your homescreens and connect your Blade to your windows pc with a USB cable and press the switch, USB tethering DOES work with this ROM. (make sure data = ON)
Click to expand...
Click to collapse
I can confirm this. Works a charm with linux (Wifi Tether just throws an unspecific error tho)
joooker16 said:
I've installed "Extended Controls" and if you install a USB Tether "switch" on one of your homescreens and connect your Blade to your windows pc with a USB cable and press the switch, USB tethering DOES work with this ROM. (make sure data = ON)
Click to expand...
Click to collapse
What is "Extended Controls"? I'm now trying to setup native USB tethering on Modaco Paul's last 2.2 ROM and have no succes.
With this new ROM on what system your USB tethering works? I have Windows XP only at this moment, could it work on it?
TwistBomber said:
What is "Extended Controls"? I'm now trying to setup native USB tethering on Modaco Paul's last 2.2 ROM and have no succes.
With this new ROM on what system your USB tethering works? I have Windows XP only at this moment, could it work on it?
Click to expand...
Click to collapse
extended controls is a extended power control widgets
see herehttp://www.appbrain.com/app/extended-controls/com.extendedcontrols
Blade with 5MPx
Will there be support for the Blade with 5MPs camera? (aka Sapo A5)
eucurto said:
Will there be support for the Blade with 5MPs camera? (aka Sapo A5)
Click to expand...
Click to collapse
only if zte release the kernel for that device
until now we only have the kernel for the 3.2mp's camera
Confirmed 3G - USB tethering
3G tethering works in 3b release. Also standard "Modem" menu returned on its place in Settings. And great newest app for Radio already included in 3beta firmware. I think it's the best firmware now for Blade.
Occasional screen freeze
Hi there Mannas,
I got a ZTE blade for christmas and I put this rom on it and it is very good. I however am seeing the occasional screen freeze where, when I wake the phone up cannot use the screen. Now the buttons still work and I can press the power button and it responds giving the options but I cannot press any of them.
I am running this rom with SetCPU and Advanced Task Manager which I shall switch off to see if it makes a difference.
Any thoughts on how to capture this issue would be appreciated as its a good phone.. just a little frustrated why the screen input disapears occasionally forcing a reset with the battery.
adelamare said:
Hi there Mannas,
I got a ZTE blade for christmas and I put this rom on it and it is very good. I however am seeing the occasional screen freeze where, when I wake the phone up cannot use the screen. Now the buttons still work and I can press the power button and it responds giving the options but I cannot press any of them.
I am running this rom with SetCPU and Advanced Task Manager which I shall switch off to see if it makes a difference.
Any thoughts on how to capture this issue would be appreciated as its a good phone.. just a little frustrated why the screen input disapears occasionally forcing a reset with the battery.
Click to expand...
Click to collapse
I don't know what is happening with your phone. you should ask that question the original thread on modaco here is the link http://android.modaco.com/content/zte-blade-blade-modaco-com/327579/rom-froyo-japanese-jellyfish-rls3b-2011-01-01-oled-tft/
R4 is live
http://android.modaco.com/content/z...-japanese-jellyfish-rls4-2011-01-03-oled-tft/
tested on sapo a5 (portuguese provider)
only camera don´t work.
increase battery, and more fast than stock rom.
João
Update the main-post dude, Japanese Jellyfish is now version 6..
Japanese Jellyfish RLS7 [2011-01-13] [OLED+TFT], Facebook sync fix attached!
Downloads
* Japanese_Jellyfish_RLS7.zip (for normal Clockwork install) (115.7Mb system) MD5: 933CC50FF749D0CA2A5BBF611AB57B19
* Japanese_Jellyfish_RLS7_image.zip (for repartitioning and install) MD5: AD7423E804A16EA35394A4B912A6509B
* Japanese_Jellyfish_RLS7_ahb_overclocked.zip (50% AHB bus overclocking at speeds above 600MHz addon) MD5: 13229B3AC34C1917F1A0ECC4B82B4723
* Japanese_Jellyfish_RLS7_hw_ui.zip (Addon to enable hardware accellerated UI) MD5: F422A55C0322B02F1D6F106A31094A66
* Japanese_Jellyfish_RLS7_circle_battery.zip (Addon to enable circle battery indicator) MD5: A6D60415CE99757C61E8C02C4FA8AF7F
* Japanese_Jellyfish_RLS7_deskclock.zip (Addon to replace Alarm Clock with Desk Clock) MD5: FBBEB626B5E06D7EEF2097844C6525FB
Changing system partition size to 128Mb and data to 286Mb(FOR ADVANCED USERS ONLY ON THEIR OWN RISK!)
* Download the image version of the ROM and extract the "image" folder to the the SD-card.
* Power off the phone and when powering on hold Menu and Volume-up
* When some green text shows up saying it's installing a bunch of .mbn and .img files you may release the buttons and wait for it to reboot. (NOTE: I tried this on a TFT Blade and no green text was shown, just a black screen but after a while it rebooted and everything had worked like it was supposed to. Not sure if it was a coincidence or if TFT Blades doesn't show the green text)
NOTE! This also installs a bunch of firmware files from the Hungarian 256->512Mb update. It works fine on my OSF but do NOT blame me if it bricks your phone. You do not NEED to change partition sizes to use the "lite" version. It's just for advanced users who want to get more space for apps in /data. If this sounds confusing, then it's not for you.
Don't forget to rename or remove the "image" folder on the SD-card when you are done so that you do not reinstall your phone by mistake later on. Sometimes it enters the "image" install when you try to boot into bootloader mode if the image folder still exists on the card.
Go back to standard partition sizes
Repeat the above but with this "image" folder: http://www.mediafire.com/?xtckadj09b7sxt2 MD5: C8010D841AF463F3CB1FDEDFFAFA3B1E. After this you will have Clockwork Recovery as both boot and recovery image so you'll need to put a ROM on your SD-card and install.
Post RLS7 fixes (attached)
* Facebook sync fixed
RLS7 - 2011-01-13
* gps.conf back to pre-RLS6 version
* resolv.conf removed (don't think it was used anyway and have only seen it in CM releases)
* VPN menus enabled in Settings.
* Automatic time setting enabled in Settings.
* Signal indicators fixed (using same levels as in ZTE 2.1 ROMs)
* Original Alarm clock back (has more options) but can be replaced with Desk Clock through addon if DeskClock is preferred.
* Stock Filer app back as it can be good to have a simple file manager in place.
* Removed lots of lib connected to the iwnnime (japanese IME) that was removed erlier. (Size of system is now below 120Mb)
* Changed HH.MM time display to HH:MM in Danish, Norwegian and Finnish language files.
* Added more PPP options in kernel (for VPN).
* Circle battery indicator is no longer the default but can be added as an addon.
* Added Sebastians RA recovery (with CM colors) to the "image" install as it supports EXT4 and also the addons needs a recovery image.
* I'm sorry but it is NOT resigned with test keys as I promised it would be. I'm afraid resigning everything with testkeys can lead to problems when updates to "stock" apps like Gmail and Market arrives. This needs to be investigated further before testsigning the release.
Which kernel version is in RLS7?