Database Info

Looking for emmc firehose mbn file (violet)

Hello everyone, currently after my bad decision to flash keymaster file form Note 7, my Note 7 Pro is dead and don't have heart beat.
After a while I see only EDL working via testpoint on back cover. Now am stuck between two option to pay 30$ for auth. account or find emmc file.
I know nothing is free but i will try to find emmc firehose mbn file. If anyone have idea where can find be kind to share with me. Thanks in advance!
I think the name of the file will be prog_emmc_firehose_Sdm675_ddr.mbn or prog_emmc_firehose_Sdm6150_ddr.mbn

b0nb0n3v said:
Hello everyone, currently after my bad desiciot to flash keymaster file form Note 7, my Note 7 Pro is dead and don't have heart beat.
After a while I see only EDL woriking via testping on backcover. Now am stuck between two option to pay 30$ for auth. account or find emmc file.
I know nothing is free but i will try to find emmc firehose mbn file. If anyone have idea where can find be kind to share with me. Thanks in advance!
I think the name of the file will be prog_emmc_firehose_Sdm675_ddr.mbn or prog_emmc_firehose_Sdm6150_ddr.mbn
Click to expand...
Click to collapse
It will available in fastboot rom right ? ?

urstrulynaveen said:
It will available in fastboot rom right ? ?
Click to expand...
Click to collapse
No, no light, no vibration - nothing. Only EDL via testpins work, but need auth. account for flash. I think have another way to revive. I will wait some guru to see this thread.
I don't know did available to switch from EDL to fastboot?

b0nb0n3v said:
No, no light, no vibration - nothing. Only EDL via testpins work, but need auth. account for flash. I think have another way to revive. I will wait some guru to see this thread.
I don't know did available to switch from EDL to fastboot?
Click to expand...
Click to collapse
This happend to me also i searched whole internet but sadly their is no firehose file for our violet available to bypass edl auth. I suggest the best way to reach nearest service center they flash it with mi flash via testpoints and its cheap not so coastly. Dont try to flash by your side alone u may trash ur partition tables situations may get worse.

Same here I don’t have any hope for this trash. Never gonna by a Xiaomi again. I remember in old redmi phones you didn’t need auth to flash edl
---------- Post added at 09:20 AM ---------- Previous post was at 09:19 AM ----------
There was a Russian selling me auth account for 10$ but I bet he’s gonna scam so I didn’t try.
Anyway. Let me know if you find the firehose file or anything.

DeveloperOne said:
Same here I don’t have any hope for this trash. Never gonna by a Xiaomi again. I remember in old redmi phones you didn’t need auth to flash edl
---------- Post added at 09:20 AM ---------- Previous post was at 09:19 AM ----------
There was a Russian selling me auth account for 10$ but I bet he’s gonna scam so I didn’t try.
Anyway. Let me know if you find the firehose file or anything.
Click to expand...
Click to collapse
Yes they are scamers and they use TeamViewer which may lead to hack your computer. So better is to rush on service center. Those good old days of redmi phones will never come back they are imposing more and more restrictions to devices.

my violet is dead !
my phones is also dead ....was trying to get back to miui 11 (android 9)from covrvus 6.5(android 10) because no sensors were working in corvus !
i got miui 11 but wifi was not working and sensors too ! tried flaashing many fastboot roms from offical miui sites but non of them fixed senors and wifi ! ...then tried flashing with old miflashtool probably 2014 version ... then flash system error came while flashing fastboot rom violet ....
then phone got switched off automaticaly ! and never started since then !
i looked up everything flashing with edl mode !
in miflashtool
earlier when bootloader it was showing "ceeee0ccc0" device name
now in miflashtool it is showing "COM20" or"COM10"
when i am flashing fastboot rom latest one with latest flashtool
it is showing "packet receive something something..." call paket ...etc
some time it shows "edl auth " then it ask to sign in my account after login ..
"Your Acount is bined to this system " but later ""Your account is not authorised for this operation !"
and hence the flashing stops with error !
if someone is seriously readying this you can reply and ask for screenshots
please ! i have lost all hopes ! i need some guidence and lil help !
I looked a way to bypass edl auth ...
but the video was of Redmi note 7 ! not pro
in there he used
some file "prog_emmc_firehose_Sdm610_ddr.mbn" somehing like that ...
he placed this file in images folder !
it skipped the edl auth ...and flashing continued !
maybe if i can get file
prog_emmc_firehose_Sdm675_ddr.mbn something like that of my phone
violet version for my chipset
maybe i can skip too auth edl ....
dont know ! just help please !

kankurcool said:
my phones is also dead ....was trying to get back to miui 11 (android 9)from covrvus 6.5(android 10) because no sensors were working in corvus !
i got miui 11 but wifi was not working and sensors too ! tried flaashing many fastboot roms from offical miui sites but non of them fixed senors and wifi ! ...then tried flashing with old miflashtool probably 2014 version ... then flash system error came while flashing fastboot rom violet ....
then phone got switched off automaticaly ! and never started since then !
i looked up everything flashing with edl mode !
in miflashtool
earlier when bootloader it was showing "ceeee0ccc0" device name
now in miflashtool it is showing "COM20" or"COM10"
when i am flashing fastboot rom latest one with latest flashtool
it is showing "packet receive something something..." call paket ...etc
some time it shows "edl auth " then it ask to sign in my account after login ..
"Your Acount is bined to this system " but later ""Your account is not authorised for this operation !"
and hence the flashing stops with error !
if someone is seriously readying this you can reply and ask for screenshots
please ! i have lost all hopes ! i need some guidence and lil help !
I looked a way to bypass edl auth ...
but the video was of Redmi note 7 ! not pro
in there he used
some file "prog_emmc_firehose_Sdm610_ddr.mbn" somehing like that ...
he placed this file in images folder !
it skipped the edl auth ...and flashing continued !
maybe if i can get file
prog_emmc_firehose_Sdm675_ddr.mbn something like that of my phone
violet version for my chipset
maybe i can skip too auth edl ....
dont know ! just help please !
Click to expand...
Click to collapse
Bro sadly there is no firehose file for violet. I had same issue earlier only solution is to go service center. They flash in edl takes just 10 mins charge around 180 rupees. U may try flashing via umt dongle or miracle thunder but i never recommendes that.

My RN7pro got also dead, I had to pay 1200rs to revive this phone by local mobile repairer. They flash it with UFI box. I made mistake no to go authorised service center. That technician looted me.

b0nb0n3v said:
No, no light, no vibration - nothing. Only EDL via testpins work, but need auth. account for flash. I think have another way to revive. I will wait some guru to see this thread.
I don't know did available to switch from EDL to fastboot?
Click to expand...
Click to collapse
hey dude can u pls help me? im on the same boat which u were on. i dont find that patched up emmc file of note 7 pro. flashing with the stock rom showing error in quolcomn softwares as well in mi flasher tool. pls help what to do now

Development [ROM] [OFFICIAL] [ TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst]

This ROM is for TB-716F, the Chinese version (not Global).
for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.
Since lolinet uploaded the same package, mine from onedrive is deleted (to save some storage).
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.
Other roms, I mean the Global ones, you can get them from lolinet.

asukav said:
This ROM is for TB-716F, the Chinese version (not Global).
for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip
Compressed (zipped) Folder
1drv.ms
Pls get me noticed if the link is invalid.
BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.
Click to expand...
Click to collapse
You are amazing! This rom is flasheable with qualcomm program right?

sakun-ice said:
You are amazing! This rom is flasheable with qualcomm program right?
Click to expand...
Click to collapse
If you are talking about QFIL, then yes. Just pay attention to the steps (copied from another post) :
turn tablet off, disconnect to PC, open Qfil, press down the "volume +" buttom (do not release) and connect to pc (release till Qfil shows "Qualcomm HS-USB QDLoader 9008(comx)").
A. Qfil-Configuration-FireHoseConfiguration:
1. device type: ufs
2. Reset After Download: check
B. the main window:
load content: the contents.xml file
then press download content and wait till it boots.

I tried to flash this rom step by step according to your instructions. Unfortunately I get the following error message: Sahara protocol failed

rgeon said:
I tried to flash this rom step by step according to your instructions. Unfortunately I get the following error message: Sahara protocol failed
Click to expand...
Click to collapse
I'm sorry for this but I checked through Google, it's said some reasons could cause this error.
I think the ones below should be one of the causes:
1. QFIL version is old. I'm using 2.0.2.3, but there's newer versions.
2. USB cable should be the original one from the box not a random one.
3. when QFIL settings are all ready, press vol+ then connect to PC (do not connect to pc too early), then confirm QFIL shows "Qualcomm HS-USB QDLoader 9008(comx)". And please keep USB connecting to PC till your pad boot to normal.
4. before flashing, pls make sure the qualcomm driver is correctly installed (in case of the windows driver signature check restriction).
Hope everything be fine. Good luck!

Hi Guys, this video fixed my problem:
Now i have flashed stock rom

asukav said:
This ROM is for TB-716F, the Chinese version (not Global).
for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip
Compressed (zipped) Folder
1drv.ms
Pls get me noticed if the link is invalid.
BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.
Other roms, I mean the Global ones, you can get them from lolinet.
Click to expand...
Click to collapse
@asuka: 1000 Thanks to you! You are the best!!
I will try to flash the stock ROM tomorrow.

rgeon said:
Hi Guys, this video fixed my problem:
Now i have flashed stock rom
Click to expand...
Click to collapse
I received the same error message: Download Fail:Sahara Fail:QSaharaServer Failrocess fail
My Qfil-Configuration-FireHoseConfiguration:
device type: ufs
Reset After Download: check
Which elf-file have you selected in field programmer? prog_firehose_ddr.elf or prog_firehose_lite.elf
Have you selected the contents.xml file in the field flash build?

I think I destroyed my Tablet today . I selcted the file rawprogram_unsparse0.xml. the Download Succeed and afterwards the Tablet shows the Lenovo Logo after start for mor than 10 minutes. It seems the chineses ROM has not been installed and the previous ROM has been deleted. Now I can access only bootload and adb shows
my Tablet in List of devices as unauthorized. Also a boot in EDL mode by pressing Volume + and Power is not possible anymore. I would be really thankful, if anybody has an advice for me, what I can do now.

Hello. Now I was able to flash the chinese Rom on my Tablet, but WLAN does not work. I´m not able to activate WLAN. Does anybody else has the same problem?

trojaner_80 said:
Hello. Now I was able to flash the chinese Rom on my Tablet, but WLAN does not work. I´m not able to activate WLAN. Does anybody else has the same problem?
Click to expand...
Click to collapse
I read something about that. They have to change the region of the tablet to Hong Kong.
How have you recovered the rom?

trojaner_80 said:
Hello. Now I was able to flash the chinese Rom on my Tablet, but WLAN does not work. I´m not able to activate WLAN. Does anybody else has the same problem?
Click to expand...
Click to collapse
I had this issue its the wireless band of your router. I had to set my router to Hong Kong band to get on the 5ghz band.

I was able to install this rom, but now I have an issue with the OTA. Was anyone able to apply the update 12.6.238 ST 8.27MB? Mine keeps me prompting to re-install the same version after reboot. I've tried many times.
By the way, I had hope I would get widevine L1 after installing the rom 210730, but that didn't happen .

Was anyone able to get widevine L1 after flashing this ROM?

Great work sir,
Does it have any other language or just only English and China?

fabricioss1980 said:
Was anyone able to get widevine L1 after flashing this ROM?
Click to expand...
Click to collapse
Firstly, you have to factory reset the CN rom you just installed, otherwise your device will get bricked. Then you relock the bootloader with fastboot command "fastboot flashing lock". You will get widevine L1 back.

Is there an opportunity to unbrick the Tablet?

@asukav
hello sir.
Do you have cn 12.6.084 rom? Or zui12.5 or higher (android 11) the most recent cn rom..
i need lastest cn rom..
Is it possible to get the rom?

asukav said:
This ROM is for TB-716F, the Chinese version (not Global).
for @mardon85 @trojaner_80 @sakun-ice and all friends in this section.
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip
Compressed (zipped) Folder
1drv.ms
Pls get me noticed if the link is invalid.
BTW, I'm using TB-606F, and I'm living in China. So if you want any Chinese version ROM, pls let me know.
Other roms, I mean the Global ones, you can get them from lolinet.
Click to expand...
Click to collapse
can i get the latest version of chinese rom of Tb-606f?

Sorry guys. Thiese roms are what I can find in chinese forums.
Since they can be upgraded (Mine is 606, and OTAs are all right, so I guess other models can be) through OTA, it seems no need to get the latest.
But if there appears any, I'll upload them.
It's National Day Holiday, 7 days starting from Oct. 1. I won't be online for long.
And I'm still trying to figure out how to flash the latest Global on 606 CN Ver.
The hardware incompatible error sucks. F you, Lenovo.

Unbrick lg velvet edl 9008

any one help to unbrick lg velvet edl 9008 ?

Bahmale said:
any one help to find lg velvet firehose ?
Click to expand...
Click to collapse
Greetings. Please cease with your posts.
I have requested a Moderator to assist you to understand why you are violating XDA rules.
Post no more before they communicate with you, please.
Additionally, I will call upon one of the most knowledgeable Members here that I know.
Perhaps @SubwayChamp can assist you.

Bahmale said:
any one help to unbrick lg velvet edl 9008 ?
Click to expand...
Click to collapse
If you made all the previous steps properly I mean, you successfully installed the Qualcomm 9008 USB drivers, you could put your device in download (9008) mode, got your device detected by PC and you are needing a Firehose file then the most you can do as of now is searching for "Firehose for LG Velvet" and see if there’s one available or some member can provide it if they have it, alternatively you can search for one from a similar device, with same processor, it could work too.
Anyway waiting for some help the better you can do is describing properly your issue instead of open more, do not make others have to ask you a lot of things that your request for help lacks, this simply will result in no-help at all. We live in times of haste and anguish.

SubwayChamp said:
If you made all the previous steps properly I mean, you successfully installed the Qualcomm 9008 USB drivers, you could put your device in download (9008) mode, got your device detected by PC and you are needing a Firehose file then the most you can do as of now is searching for "Firehose for LG Velvet" and see if there’s one available or some member can provide it if they have it, alternatively you can search for one from a similar device, with same processor, it could work too.
Anyway waiting for some help the better you can do is describing properly your issue instead of open more, do not make others have to ask you a lot of things that your request for help lacks, this simply will result in no-help at all. We live in times of haste and anguish.
Click to expand...
Click to collapse
I need firehose can u help

Bahmale said:
I need firehose can u help
Click to expand...
Click to collapse
No, I don't have a firehose. I think you didn't read my post, probably you won't find a specific/unique firehose for your device instead you need to find a patched firehose for a similar device that could work for you too, check which processor/SoC/motherboard has your device and then search for it, something like this https://www.droidwin.com/patched-firehose-file/

SubwayChamp said:
No, I don't have a firehose. I think you didn't read my post, probably you won't find a specific/unique firehose for your device instead you need to find a patched firehose for a similar device that could work for you too, check which processor/SoC/motherboard has your device and then search for it, something like this https://www.droidwin.com/patched-firehose-file/
Click to expand...
Click to collapse
Lg velvet Qualcomm SM7250 , can send me patched firehose for a similar device , I will try if work or not in my device ?

Bahmale said:
Lg velvet Qualcomm SM7250 , can send me patched firehose for a similar device , I will try if work or not in my device ?
Click to expand...
Click to collapse
@SubwayChamp has provided you direction, along with informing you that he/she does not possess what you seek. If you are not willing, or able, to follow the direction provided then you must accept that what you seek will remain forever elusive.
Results now rely upon you and reality.
Best wishes.

Bahmale said:
any one help to unbrick lg velvet edl 9008 ?
Click to expand...
Click to collapse
HELLO, do u unbrick your g900um Done ? i hvae one pcs. on opid mismatched error, mayba can u shared the firehorse. SM7250. ? tks

KTIENDA said:
HELLO, do u unbrick your g900um Done ? i hvae one pcs. on opid mismatched error, mayba can u shared the firehorse. SM7250. ? tks
Click to expand...
Click to collapse
No firehose for the Velvet 5g as of yet.

How To Guide 100% successfully unlock the Bootloader of your ROG Phone5/5s

Success is disgusted by some people, and will not share any files for free in the future.

Once again you proved it bro. Amazing job will test now and confirm.

Working perfectly tested and rooted. Steps are easy to follow.
1) Download the ENG firmware and flash it following the steps.
2) Then follow this post and the commands to extract asuskey4 and add ISN to the asuskey4.
3) Flash WW ROM back to the phone.
4) Use Unlock tool and then done.

by far one of the best contributions of the forum, I don't usually comment, but I had to thank you

This is huge! The answer everyone with Tencent WW phones were looking for! Thank you

Could anyone please elaborate step 1 (flashing the ENG firmware provided)?
My phone enters edl mode and I see port 9008 in the device manager.
What should I do next?

arjun_m4 said:
Working perfectly tested and rooted. Steps are easy to follow.
1) Download the ENG firmware and flash it following the steps.
2) Then follow this post and the commands to extract asuskey4 and add ISN to the asuskey4.
3) Flash WW ROM back to the phone.
4) Use Unlock tool and then done.
Click to expand...
Click to collapse
yes,very easy

Can NOT flash ENG firmware..
Method # 1 : "0-update_image_EDL.bat" does not even start
Method # 2 : ERROR_UNSUPPORTED_TYPE
Method # 3 : Download Fail:FireHose Fail: FHLoader Fail: process fail
SOS guys! I am in deep sh*t!!

I cant find the SSN in the device.txt ... Only ISN is available .. ?

JazonX said:
I cant find the SSN in the device.txt ... Only ISN is available .. ?
Click to expand...
Click to collapse
You can see SSN on our phone when you boot up ENG firmware just type urself to the editor.
Find the address mentioned and start typing from first 0 u will see the HEX changing and then verify it's correct and save

aimsjahan said:
Can NOT flash ENG firmware..
Method # 1 : "0-update_image_EDL.bat" does not even start
Method # 2 : ERROR_UNSUPPORTED_TYPE
Method # 3 : Download Fail:FireHose Fail: FHLoader Fail: process fail
SOS guys! I am in deep sh*t!!
Click to expand...
Click to collapse
Can you check if your phone is being recognized as EDL maybe the drivers are installed wrong. I can verify that the files provided works 100% and you have to use left side type c of the Asus not the bottom.

JazonX said:
I cant find the SSN in the device.txt ... Only ISN is available .. ?
Click to expand...
Click to collapse
SSN can be seen on the homepage of the mobile phone after flashing the ENG firmware, or on the packaging box of your mobile phone.

Asuskey4 software download link please

Thanks, @johnny886! Btw, can you change your post to "General" instead of "Question", and pin it to this forum so people would use it as a reference in the future?

arjun_m4 said:
Can you check if your phone is being recognized as EDL maybe the drivers are installed wrong. I can verify that the files provided works 100% and you have to use left side type c of the Asus not the bottom.
Click to expand...
Click to collapse
My ROG5 is being shown in Device Manager as Qualcomm 9008. So I guess it has entered in EDL mode.

aimsjahan said:
My ROG5 is being shown in Device Manager as Qualcomm 9008. So I guess it has entered in EDL mode.
Click to expand...
Click to collapse
Could you reinstall the drivers I have faced issues like this before with other Qualcomm devices. Reinstall Qualcomm drivers it should work. And remember to install with disable signature enforcement.

Akkaya34 said:
Asuskey4 software download link please
Click to expand...
Click to collapse
I think you haven't figured out how to do it. Please read the steps carefully before proceeding. . .

arjun_m4 said:
Could you reinstall the drivers I have faced issues like this before with other Qualcomm devices. Reinstall Qualcomm drivers it should work. And remember to install with disable signature enforcement.
Click to expand...
Click to collapse
Appreciate your response mate! I will try again after reinstalling QCOM drivers. Could you please share that driver you are using?
Also, my PC does NOT detect ROG5 when using the official USB-C on both end cable. I have to use another cable with USB in one end and USB-C in the other end. Do you think that might be an issue?

With lost imei , imei=0 , I correct imei , SN in asuskey4 but it not unlock

nguyenhung9x2018 said:
With lost imei , imei=0 , I correct imei , SN in asuskey4 but it not unlock
Click to expand...
Click to collapse
The asuskey4 should contain SSN and ISN then only it will unlock. Make sure it's there and how come you lost your IMEI I tried this for 2 separate devices and I didn't face any issue.

How to unbrick LG K51

Hello friends, new user and noob here.
I came to this forum thanks to a thread of user @Warlockguitarman who explains how to root/unlock LG phones in general.
My problem is that I tried to downgrade this phone to unlock the GSM carrier (original MetroPCS) using LGUP and an old firmware of the carrier, and the downgrade worked, but the unlocker tool didn't work with that firmware, so I tried again with the oldest firmware I could find (10F) and well, the phone became a nice little brick since then.
Working with different solutions, and thanks to the tutorial by @Warlockguitarman I somewhat make some progress, and now the device is recognized as Mediatek without the connect/disconnect status and I can use SP Flash Tool.
The thing is I don't have anything to work with. I found a scatter file alledgly for K51, but it didn't work.
Maybe some user here have scatter from a backup to try to revive this thing?
Thanks all for your time and responses! I appreciate any help I could get.

alvayag said:
Hello friends, new user and noob here.
.....
Click to expand...
Click to collapse
Unbricking isn't so difficult.
Since the device now gets detected in BROM Mode (Mediatek USB Port), the next thing is to build a scatter file from your extracted kdz then go the SP flash tool + MTK Bypass route or just use MTK Client

Building a scatter is a little beyond my experience.
Is there any guide or tutorial to learn how to do it?
Many thanks for your answer!

alvayag said:
Building a scatter is a little beyond my experience.
Is there any guide or tutorial to learn how to do it?
Many thanks for your answer!
Click to expand...
Click to collapse
Check on youtube how to convert lg kdz to scatter file

Hi, I've made a thread on this forum because I have the same issue with a K52, I have a scatter file and partitions, I tried to flash them with SP Flash Tool, but the phone still doesn't start, can anyone help me please ?
Here is what I tried :
Please help !! I bricked my LG K52
Hi everybody, I may need the help of someone very experimented in flashing smartphones with Mediatek chipsets, I wanted to unlock the bootloader of my K52, so I downgraded it to Android 10, then I unlocked it with MTKClient, but it got stuck in a...
forum.xda-developers.com