Related
Google Nexus S i9023
Country: India
Carrier: Vodafone
Android version: 4.1.1 (Stock OTA from Google)
Build number: JRO03E
I've been on Jelly Bean for 5 hours. Apart from discovering that the CRT lock screen animation works only very sporadically (another thread here talks about it), 3 times the following has happened:
The phone was on idle, screen turned off. I woke my phone by pressing power button and nothing happened. I waited for almost 10 seconds, and the phone woke up. It took 10 SECONDS TO WAKE UP.
This has happened very sporadically too. I dont know if there's a pattern when it happens and when it does not. Anybody else here experience this problem?
First time it happened, I had Developer Options turned on. I turned it off.
After the second and third time, I restarted my phone.
That was an hour ago. It has not yet happened again, and I am watchful as ever. If someone else has faced a similar problem or knows whats causing it, please do reply!
I cant imagine what I'll do if this happens when I need the phone for an emergency.
sometimes when i press the power button nothing happen !! and i must press it again !
milindvk said:
Google Nexus S i9023
The phone was on idle, screen turned off. I woke my phone by pressing power button and nothing happened. I waited for almost 10 seconds, and the phone woke up. It took 10 SECONDS TO WAKE UP..
Click to expand...
Click to collapse
soft reboot? Happened to me before because I was using LBE app which is not compatible with JB, no more soft reboot after uninstalling the app.
gleenfield97 said:
soft reboot? Happened to me before because I was using LBE app which is not compatible with JB, no more soft reboot after uninstalling the app.
Click to expand...
Click to collapse
Umm.. even with soft reboot, I would see some activity on the screen right? Like the booting animation or something..?
When I tried waking up the phone, it did not give any feedback whatsoever. It just sat there like a piece of dumb plastic for 10 seconds. And then, it nonchalantly showed me the lock screen as if nothing had gone wrong and I had only just pressed the power button.
BTW, it has been almost 6 hours since I restarted my phone and this incident has not repeated itself.
Don't try to remove the battery and insert again
Same problem was caused by my nexus S I9023 after the OTA update from google for jelly bean.I removed the battery then the system starts booting up without pressing the power button.Then i removed the battery again and suddenly phone stopped booting up.(No display,No usb connection,No power button ,No button combination work to enter into recovery mode)Phone became completely dead It is now hardbricked and became a paperweight....
Now im looking for the repair ..Can anyone suggest what can be done now ???
gagan330 said:
Same problem was caused by my nexus S I9023 after the OTA update from google for jelly bean.I removed the battery then the system starts booting up without pressing the power button.Then i removed the battery again and suddenly phone stopped booting up.(No display,No usb connection,No power button ,No button combination work to enter into recovery mode)Phone became completely dead It is now hardbricked and became a paperweight....
Now im looking for the repair ..Can anyone suggest what can be done now ???
Click to expand...
Click to collapse
Have you tried an usb-jig?
mobile is not working
shivasrage said:
Have you tried an usb-jig?
Click to expand...
Click to collapse
hi, this is bhaskar i got same problem with mobile what u have with u r mobile if u got any solution pls reply me
bhaskar91 said:
hi, this is bhaskar i got same problem with mobile what u have with u r mobile if u got any solution pls reply me
Click to expand...
Click to collapse
There is not much you can do...if you can´t start phone
even with a jig it´s bricked...it happens to me 2 times last year
without any flashing something wrong or so.
I turned phone off next morning it never wake up again.
I have raed that the reason is maybe the JB bootloader so
After repair I flashed ICS bootloader....we will see if it happens again.
good luck :good:
Hi All,
I am in desperate need of your guidance.
I purchased a Mate9 about 6 months ago in Dubai and loved it ever since. I recently traveled back to the middle east and I received a notification that a software update has become available. I then downloaded the update and installed it normally. Once the phone restarted, a white screen appeared for about 10 mins. Due to the fact that it was not booting up, I decided to put the phone off with the power button and the phone has since refused to restart. :crying: :crying: :crying:
The phone now seems to be completely dead, even when the charger is plugged in, no indication of it charging. When I connect the phone to the pc nothing happens, it is as if nothing is connected.
Can anyone guide me as to what route to follow?
What can I do to get my dearest mate 9 alive again?
Your feedback would be highly appreciated.
Regards,
CapeTownGuy
Do you have Middle East (Dubai) stock ROM in it and updated it with European update ?
Try to reset / reboot it, first without factory reset and if that really does not work, with Factory reset (i.e. all your data will be wiped).
http://www.hardreset.info/devices/huawei/huawei-mate-9/
So I was able to get my hands on a new 8gb/512gb matte black version of this. Was setting up the phone, updated to Android 10 first before transfering sms, call logs and updating apps. Went to turn off the phone to insert my SIM card and now the phone won't turn on. It vibrates every time I press the power button but then nothing. Currently it's connected to the supplied charger with the LED light lit red. It was already charging while I was using it, had about 70% battery before I switched it off. I've tried volume down + power button for 10 seconds, LED light turns off and it vibrates, and it keeps vibrating every 10 seconds when it's connected to the charger (doesn't keep vibrating when it's not connected). Can feel the area between the fingerprint reader and camera pretty hot during this. Volume up + power doesn't work either. Any ideas?
Try pressing and holding all three.
Power + vol up + vol down. Should force a reboot.
isthisadagger said:
Try pressing and holding all three.
Power + vol up + vol down. Should force a reboot.
Click to expand...
Click to collapse
No response. Not even a vibrate.
That is unfortunate. I had this multiple times. Black screen but phone was on. Just did not react to power button or screen did not turn on. The button combo helped.
Only other idea I have is to let the battery run out. If the phone is even on in your case.
How could you tell if the phone was actually on? Could you receive calls or something?
And this was on your Zenfone 6 too?
I've left it off charge for the last 5 days now. I don't think it's gonna run flat soon, considering that it's not even on.
I think I will send it back to the seller (Taiwan!) tomorrow
The notification led was blinking. Yeah on zf6. It stopped happening a few month ago. Probably fixed in a few update. But yours seems to be a different problem.
CVonV said:
So I was able to get my hands on a new 8gb/512gb matte black version of this. Was setting up the phone, updated to Android 10 first before transfering sms, call logs and updating apps. Went to turn off the phone to insert my SIM card and now the phone won't turn on. It vibrates every time I press the power button but then nothing. Currently it's connected to the supplied charger with the LED light lit red. It was already charging while I was using it, had about 70% battery before I switched it off. I've tried volume down + power button for 10 seconds, LED light turns off and it vibrates, and it keeps vibrating every 10 seconds when it's connected to the charger (doesn't keep vibrating when it's not connected). Can feel the area between the fingerprint reader and camera pretty hot during this. Volume up + power doesn't work either. Any ideas?
Click to expand...
Click to collapse
I am not sure where, but I think when I was trying to fix my hard bricked Z6, some post said that a red LED without any other notion from the phone means that you may be able to get this running in QD-Loader mode - check this: https://forum.xda-developers.com/zenfone-6-2019/how-to/qdloader-brick-t3980165
Can you get the phone to register as a COM-device?
abprie said:
Can you get the phone to register as a COM-device?
Click to expand...
Click to collapse
My post on here: recognised as an Android ADB Interface but I can't do an adb reboot as "device not found"
I am not sure where, but I think when I was trying to fix my hard bricked Z6, some post said that a red LED without any other notion from the phone means that you may be able to get this running in QD-Loader mode - check this: https://forum.xda-developers.com/zenfone-6-2019/how-to/qdloader-brick-t3980165
Click to expand...
Click to collapse
Thanks for this. I actually saw this a few days ago but was reluctant to try as I'm worried it might void the warranty.
CVonV said:
No response. Not even a vibrate.
Click to expand...
Click to collapse
Try again the Power + vol up + vol down combo, but hold it 30 secs. If still does not reboot, get worried...
papete said:
Try again the Power + vol up + vol down combo, but hold it 30 secs. If still does not reboot, get worried...
Click to expand...
Click to collapse
I did hold them for 1 minute and no response before. Is there a specific order which they should be pressed and held?
No, no order. Just all pressed together at once. I think you should return the phone. Last year there was a similar issue with an update and many phones had to be returned, but it was solved.
If the combo don't reboot the phone I would return it. I don't want to give them excuses not to honor the guarantee.
papete said:
No, no order. Just all pressed together at once. I think you should return the phone. Last year there was a similar issue with an update and many phones had to be returned, but it was solved.
If the combo don't reboot the phone I would return it. I don't want to give them excuses not to honor the guarantee.
Click to expand...
Click to collapse
It was never solved. It's still happening even to new ASUS phones.
To OP: Return the phone immediately. Your mobo is 95% dead. It's a hardware issue so trying to fix that is not worth losing the warranty.
aleksander002 said:
It was never solved. It's still happening even to new ASUS phones.
Click to expand...
Click to collapse
Yeah so weird as I only did an OTA firmware update from the shipped Android 9 to Android 10. It installed successfully and rebooted once. But only died once I shut it down. Was there a thread about it?
To OP: Return the phone immediately. Your mobo is 95% dead. It's a hardware issue so trying to fix that is not worth losing the warranty.
Click to expand...
Click to collapse
Yeah it actually just got back to Taiwan yesterday. Seller is being annoying though and not wanting to send me a replacement. But instead wanting to refund me and then asking me to repurchase (at a potentially higher price like seriously -_-).
Such a hassle.
CVonV said:
Yeah so weird as I only did an OTA firmware update from the shipped Android 9 to Android 10. It installed successfully and rebooted once. But only died once I shut it down. Was there a thread about it?
Yeah it actually just got back to Taiwan yesterday. Seller is being annoying though and not wanting to send me a replacement. But instead wanting to refund me and then asking me to repurchase (at a potentially higher price like seriously -_-).
Such a hassle.
Click to expand...
Click to collapse
might be you received damaged Cell because I faced the same issue when I bought LG G4 Cell, Seller told it was new but after I sent to Service Center they told its repaired cell and not new, it was motherboard issue, so might be you also picked up cell like that, other I never faced any problem in Asus 6z since I bought last year
sunnymodh said:
might be you received damaged Cell because I faced the same issue when I bought LG G4 Cell, Seller told it was new but after I sent to Service Center they told its repaired cell and not new, it was motherboard issue, so might be you also picked up cell like that, other I never faced any problem in Asus 6z since I bought last year
Click to expand...
Click to collapse
They refunded me and couldn't get stock of a new one. The repair centre apparently can't fix it either lol.
Anyway it's a blessing in disguise as I'm gonna buy the Zenfone 7 or 7 Pro now.
CVonV said:
They refunded me and couldn't get stock of a new one. The repair centre apparently can't fix it either lol.
Anyway it's a blessing in disguise as I'm gonna buy the Zenfone 7 or 7 Pro now.
Click to expand...
Click to collapse
Yes..Nice Choice, Hope Asus 7 Series Price not like onePlus & others
Same thing just happened to my wife's phone. She received an OTA update from ASUS which resulted in her phone rebooting itself during the night and getting stuck at the ASUS splash screen totally unresponsive.
I waited for the battery to die and after charging the phone powered up. It lasted 12 hours before suddenly shutting itself down when the wife was changing settings to pull the time from the network.
Now dead as a brick. Charge light no longer lights. Totally unresponsive. No amount of power button/volume button combination or time will do anything to make it work again.
Pretty pissed off as it was purchased early Sep last year and has already been sent back to ASUS in Taiwan for the USB charge port board replacement. Now 1 yr and 17 days old.
I do not know what to do now except push for a repair under warranty.
Nearly on the day when my warranty went out the ZenFone did it to.Used Bluetooth to my headphones and suddenly it went dead for good.Was reading that others on the net had the same problem and guess its a major built in fault on a rather expensive phone when i bought it. Got a new phone of a different brand and will for sure never return to any Asus phones when quality aint a strong word for that brand. Over and out.
Wow. I was looking at these phones but there are issues it seems.
Rule #1 if your OS is fast, stable and fulfilling its mission...
Do Not Update!
This goes double for carrier phones. AT&T for example can wreck your user experience with their later updates.
With Pie and above security isn't an issue unless you do something stupid.
Don't get sucker in by scare hype.
Always redundantly backup critical data to at least 2 hdds and always be ready to reload. Reload if you can't resolve a malware issue asap. Cover your ass...ets
My Xiomi Poco X3 Pro Suddenly stopped working, I was like 2 minutes away from my phone when I came back it didnt turn on. I tried to charge it but not charging. I tried holding power button for 10 seconds no response, I tried holding power button with volumn button but nothing happend. It is completely un responsive suddenly dead. What is the problem Please help me. Ps ,I saw many other poco x3 pro user also having the same problem.
My Xiomi Poco X3 Pro Suddenly stopped working, I was like 2 minutes away from my phone when I came back it didnt turn on. I tried to charge it but not charging. I tried holding power button for 10 seconds no response, I tried holding power button with volumn button but nothing happend. It is completely un responsive suddenly dead. What is the problem Please help me. Ps ,I saw many other poco x3 pro user also having the same problem.
Your phone just bricked. Which rom were you in? Which firmware?
Duplicate threads merged
sudiptoc29 said:
Your phone just bricked. Which rom were you in? Which firmware?
Click to expand...
Click to collapse
miui 12.5.4
Can you remember your battery percentage when you left? It could be the buggy PMIC of Poco X3 Pro which has bricked some devices.
I too am on 12.5.4 firmware and will soon downgrade to 12.0.4
Be prepared to go to the service centre will the invoice, hopefully they will repair or replace it for free...
arifularash said:
My Xiomi Poco X3 Pro Suddenly stopped working, I was like 2 minutes away from my phone when I came back it didnt turn on. I tried to charge it but not charging. I tried holding power button for 10 seconds no response, I tried holding power button with volumn button but nothing happend. It is completely un responsive suddenly dead. What is the problem Please help me. Ps ,I saw many other poco x3 pro user also having the same problem.
Click to expand...
Click to collapse
Very strange same thing happen to me ..
sudiptoc29 said:
Your phone just bricked. Which rom were you in? Which firmware?
Click to expand...
Click to collapse
Elite rom with licence key. It should not brick
i_sagnik said:
Can you remember your battery percentage when you left? It could be the buggy PMIC of Poco X3 Pro which has bricked some devices.
I too am on 12.5.4 firmware and will soon downgrade to 12.0.4
Click to expand...
Click to collapse
Please note Elite Premium Rom + MIUI have some error my last battery % 35 even then my phone bricked but I was at battery saving mode to.
May be I am wrong but what I think battery saver mode is malfunctioned. Please use wisely.
arifularash said:
My Xiomi Poco X3 Pro Suddenly stopped working, I was like 2 minutes away from my phone when I came back it didnt turn on. I tried to charge it but not charging. I tried holding power button for 10 seconds no response, I tried holding power button with volumn button but nothing happend. It is completely un responsive suddenly dead. What is the problem Please help me. Ps ,I saw many other poco x3 pro user also having the same problem.
Click to expand...
Click to collapse
The Same thing happened to me in Stock MIUI . It is the latest version . It died even though the battery was around 45 percent . All i did was turn off airplane mode after waking up in the morning and the phone died .
This is happened to me week ago, i went all forums the root cause seems MIUI latest updates (say in my case MIUI 12.5.5), thing is we have no fastboot mode access (simply black screen). However i could see that my pc detects phone in "hs-usb qdloader 9008" still not able to flash the firmware. Many folks shouting this that motherboard faults(happens in custom rom)
Now i have given it to MI service center, they clearly stated many devices coming with similar issue and all are motherboard faults. Waiting for the Motherboard replacement(no stock available as of now center mentioned)/ Device replacement. Daily driver gone
Guys check this thread out
Calibration of the PMIC (Vayu/Bhima/Surya) via fastboot.
⚠️HONESTLY READ THIS WARNING ONCE! - CALIBRATION OF THE IC, WOULD NEITHER RESULT IN A HARD BRICK/PREVENT BRICK. AS TO BE CLEAR WITH THIS *HOW TO THREAD*, IS ONLY MENT FOR PEOPLE HAVING PARTIALLY BUGGY PMIC, FACING AFOREMENTIONED ISSUES, HAVING...
forum.xda-developers.com
Is this purely isolated to the Indian variant? I bought my father a global variant and now I am worried his phone will brick out of nowhere.
demil7 said:
Is this purely isolated to the Indian variant? I bought my father a global variant and now I am worried his phone will brick out of nowhere.
Click to expand...
Click to collapse
Same has happened to me in UK, dead and unresponsive after 6 weeks little use. Stock MIUI recently updated, suspect phone wakes from power off (alarms?) and battery controller allows battery to die, trying to get RMA.
Same thing happened to me. It has ~60% charge. I laid it on the table after checking the time. When I picked it up again it is off. It won't turn on, won't respond to Power button and Power + Volume Down. My warranty expired but my issue is not with warranty, but my data.
roke2 said:
Same thing happened to me. It has ~60% charge. I laid it on the table after checking the time. When I picked it up again it is off. It won't turn on, won't respond to Power button and Power + Volume Down. My warranty expired but my issue is not with warranty, but my data.
Click to expand...
Click to collapse
Try to "restart" it with the volume keys up and power on connected to the PC, if you see that the computer recognizes it as QH load 8009 or similar, it is a hardware failure, these X3s have come out with a SoC solder failure
I lost mine today. After two hangs and reboots, I took a picture and it died. It had more than 90% of battery
Is there a way to know if it I had the indian or any other variant?
Is there a way to fix it?
Funk Wizard said:
تم دمج المواضيع المكررة
Click to expand...
Click to collapse
I have a phone poco x3 pro that stopped working after I left it for 5 minutes and came back and it didn t work with me and I tried to press the power button and the volume down button and it didn t work and my air phone is on MIUI 13.0.4 update
Plese help me?
Hi there. I came here on last resort.. Yesterday after I did the last update of the security patch (december 2022 I believe), the phone rebooted just fine, and after about 5-10 minutes it froze. Screen on and simply froze. A bit after the screen went off. After 2 -3 minutes like this I tried to force restart it by holding the power button and It did vibrate altough the screen didn't turn on and it didn't reboot.
Today and even after having it charging for a while it's just dead.. Doesn't turn on, can't put in it recovery mode also, nothing.
I have no idea what happened but I can't do much.
Any advice guys?
Appreciate in advance.
The same here. I can't even boot into recovery mode. I have no idea how they're going to fix this problem. Figures - this is the first Android phone that I haven't mess with i.e. root, etc.
Well I cannot be without phone and even after being charging for more than 5 hours, there wasn't even a signal of life on it. Nothing. I also couldn't even do a backup or something. Frustrating.
Bought it on amazon last year. Spoke to them and they will refund the value. Will send it back and already bought another phone. (Redmi note 11 pro).
Regarding this is just very very bad. Stuff like this cannot happen after an oficial update.
Bye Gt2 :'c
Have no Idea of what they will do because the phone is dead pretty much.. Think this is only fixable by going to a store or something...
Unless the phone is working except the screen is off I can't see it being easily fixed. I bought my off Aliexpress so I might **** out of luck.
I tried to see if it would make some noise like if the phone was working and screen off but nothing.. IDK but this really sucks. Maybe trie to contact realme directly?
I tried plugging the phone into my computer to see if it was recognized by WIndows but nothing. I have contacted them via email and Aliexpress message board but these Chinese companies aren't known for having good customer service. It's a shame for I quite like the phone. May I ask what you bought as a replacement?
I also did that but nothing. Initially I tought it could be the battery. It was either that or the update but if you also had it then for sure it was the update and there's probably more with the same problem.. Can only wish you luck with the customer support..
I've bought the xiaomi redmi note 11 pro. I just searched similar priced phones compared to what I paid for the realme(320€) and that was the best option for the price. It costed 289€. The 6gb variant. It's not a direct competitor but it's more than enough for me and it offers a lot for the price. I also had a few xiaomis before and I don't have complaints. I checked the realme 9 pro but the xiaomi was cheaper and has better specs overall.
Thanks for the update - Good luck with the new phone.
hi to all, the device is in EDL mode?
So it means you cannot acces recovery, fastboot mode and also you cannot boot your phone!
Mr Dasher said:
I tried plugging the phone into my computer to see if it was recognized by WIndows but nothing. I have contacted them via email and Aliexpress message board but these Chinese companies aren't known for having good customer service. It's a shame for I quite like the phone. May I ask what you bought as a replacement?
Click to expand...
Click to collapse
install the qualcomm driver for the phone
Hi mate. I have no idea.. I couldn't do nothing.. Well in my case I already send it back so..
Topo's said:
hi to all, the device is in EDL mode?
So it means you cannot acces recovery, fastboot mode and also you cannot boot your phone!
Click to expand...
Click to collapse
Thanks for the response. After setting up a new Oneplus 9 Pro by changing the the firmware from T-Mobile to basic Global. I'm able to get into EDL mode . I also have the correct drivers installed in WIndows so it appears in the Device Manager when in EDL mode. I also have the current firm. I just need a working version of the MSM program.
VerVistas said:
Hi there. I came here on last resort.. Yesterday after I did the last update of the security patch (december 2022 I believe), the phone rebooted just fine, and after about 5-10 minutes it froze. Screen on and simply froze. A bit after the screen went off. After 2 -3 minutes like this I tried to force restart it by holding the power button and It did vibrate altough the screen didn't turn on and it didn't reboot.
Today and even after having it charging for a while it's just dead.. Doesn't turn on, can't put in it recovery mode also, nothing.
I have no idea what happened but I can't do much.
Any advice guys?
Appreciate in advance.
Click to expand...
Click to collapse
Message me on Instagram deepak._ydv
Something similar happened to me yesterday twice, device suddenly turned off while I wasn't even looking, and wouldn't turn on again no matter how much time I'd press the power button.
However; When I held Power Button + Volume UP for a few seconds, the device did turn ON back again.
rtkpX said:
Something similar happened to me yesterday twice, device suddenly turned off while I wasn't even looking, and wouldn't turn on again no matter how much time I'd press the power button.
However; When I held Power Button + Volume UP for a few seconds, the device did turn ON back again.
Click to expand...
Click to collapse
Geez this worked perfectly, you are a lifesaver!! After holding the Power Button + Volume Up my device did turn ON. I faced all similar issues mentioned in this thread related to booting after the screen went black while using it.