Related
Hi Guys,
Just want to post a review regarding a Full Protective Casing for our beloved Note 4. I got this casing through some seller. Not phone shops. Since I'm from Singapore, these kind of rugged and full protective cases are not available unless by ordering them through official website or Amazon.
Was surprised that there was a seller who's selling this here. Since it's a case that I've been aiming for, I decided to grab it rightaway.
The case itself is divided into 2 parts. The rubber and the hard plastic holding the screen protector. Putting it all together was quite snappy. I can say it's not too bulky or too small. Just nice.
Opening it up, it's nicely pack into a compact box. Also there'a a plastic covering the front and inside of the screen protector. No defects. I don't use the holster since it will be troublesome for me. Moving on.
Here is the link to the official site:
http://www.supcase.com/samsung-galaxy-note-4-unicorn-beetle-pro-protective-case.html
Here comes the review!!
The Pro's:
All ports covered. Including the S-Pen.
Only protector for screen. None on LED, Sensor, Front Speaker, Front Camera and Back Camera.
It's quite light if without holster.
Smooth and easy if kept in pocket. Not gonna be stuck like some cases if u try to keep and remove in n out from your pocket.
Volume, Power Button casing design is align well.
The Con's:
Fingerprint Scanning will be abit difficult as the case actually interfere with the button.
The port covers will be out of shape if continuously opened up.
Due to the smoothness of the case, it might just slip from your hands.
That are the ones that I noticed for now.
I attached 2 pics, front and back. Sorry for the lack of details and pics as I'm currently at work. LOL! Hope my review help for those who are looking to buy this case.
Here it is
Does this case scratch the metal chrome chamfered edges of the Note 4?
Does this Case work with the Samsung Wireless Charging Back Cover for the Note 4?
arjun90 said:
Does this case scratch the metal chrome chamfered edges of the Note 4?
Does this Case work with the Samsung Wireless Charging Back Cover for the Note 4?
Click to expand...
Click to collapse
I have a skinomi carbon fiber skin along the sides of my N4 and this case tore apart the skin on the side that I used to snap into the top piece of this case; as such, I believe it would be safe to assume that this case could scratch your phones metal edges. This case (for myself at least) was an extremely tight fit. As I have said in my supcase thread, this case is a really tight fit - if not too small.
I cannot say if the case will work with wireless charging, but I can assure you that your otterbox is much, much better than this supcase.
Super-thanks @JippleStar
I had installed Skinomi's Techskin last night on my Note 4 and the Otterbox Defender Series case did not accept my phone; was too resistant, and so I thought that I should stick with the Commuter for now without the Wireless Back Cover. I'll keep the Defender for back up and / or when I'm outdoors.
JippleStar said:
I have a skinomi carbon fiber skin along the sides of my N4 and this case tore apart the skin on the side that I used to snap into the top piece of this case; as such, I believe it would be safe to assume that this case could scratch your phones metal edges. This case (for myself at least) was an extremely tight fit. As I have said in my supcase thread, this case is a really tight fit - if not too small.
I cannot say if the case will work with wireless charging, but I can assure you that your otterbox is much, much better than this supcase.
Click to expand...
Click to collapse
---------- Post added at 08:27 PM ---------- Previous post was at 08:25 PM ----------
Its too bad the Skinomi Techskin does not include protection to the Chamfered edges. Neither do the other skins on the market. Bummer.
arjun90 said:
Super-thanks @JippleStar
I had installed Skinomi's Techskin last night on my Note 4 and the Otterbox Defender Series case did not accept my phone; was too resistant, and so I thought that I should stick with the Commuter for now without the Wireless Back Cover. I'll keep the Defender for back up and / or when I'm outdoors.
Click to expand...
Click to collapse
NP :good: I was very disappointed with this case and would never want anyone to go through that whole buy and return process, ya know? :silly:
I've never had so much trouble finding a case - or any other accessory though. I guess that's one of the downsides of having an extra large phone :laugh: & yeah, I would definitely keep the defender for days when you need that water-proof protection :good:
Microscratches on the Note 4's metal chamfered edges are unavoidable, even when applying the Otterbox cases, sad, but true. However, the way these phones were packaged, every Note 4 sold as new in its sealed box, has one or two scratches somewhere; I know this especially after unboxing close to a dozen Note 4's. First gapgate, then this. Lol.
Have to find a case once and for all, other-wise, we are only making our devices more susceptible.
Any solution for metal chamfered edges? I e-mailed Skinomi regarding this, and this was their response
"Hello,
Thank you for your email, and for your feedback. Unfortunately the item has been designed off the actual device here at the facility for the best results. However I will be more than glad to send your feedback to our design team.
Have a great day!
Best regards,
Skinomi Support"
JippleStar said:
NP :good: I was very disappointed with this case and would never want anyone to go through that whole buy and return process, ya know? :silly:
I've never had so much trouble finding a case - or any other accessory though. I guess that's one of the downsides of having an extra large phone :laugh: & yeah, I would definitely keep the defender for days when you need that water-proof protection :good:
Click to expand...
Click to collapse
arjun90 said:
Microscratches on the Note 4's metal chamfered edges are unavoidable, even when applying the Otterbox cases, sad, but true. However, the way these phones were packaged, every Note 4 sold as new in its sealed box, has one or two scratches somewhere; I know this especially after unboxing close to a dozen Note 4's. First gapgate, then this. Lol.
Have to find a case once and for all, other-wise, we are only making our devices more susceptible.
Any solution for metal chamfered edges? I e-mailed Skinomi regarding this, and this was their response
"Hello,
Thank you for your email, and for your feedback. Unfortunately the item has been designed off the actual device here at the facility for the best results. However I will be more than glad to send your feedback to our design team.
Have a great day!
Best regards,
Skinomi Support"
Click to expand...
Click to collapse
I second that. Lol! I'm just too tired to think about the metal edges of this beast. It's bound to be scratch sooner or later. Do not care about it that much. Care about the other surroundings instead.
I'm already thinking about the Note 5. Will be the first in line when that comes out.
slackerz_86 said:
I second that. Lol! I'm just too tired to think about the metal edges of this beast. It's bound to be scratch sooner or later. Do not care about it that much. Care about the other surroundings instead.
Click to expand...
Click to collapse
Just 2 days and i have one scratch over my case screen protector. Lol!!
slackerz_86 said:
Just 2 days and i have one scratch over my case screen protector. Lol!!
Click to expand...
Click to collapse
Unreal. I'm glad I didn't buy this one.
shawnpuerto said:
Unreal. I'm glad I didn't buy this one.
Click to expand...
Click to collapse
Well it happens to every rugged case. Especially if u have keys or coins in ur bag or pocket that u put your phone with. Same goes if u do not have a casing or cover for your phone. There will be scratches too.
slackerz_86 said:
Hi Guys,
Just want to post a review regarding a Full Protective Casing for our beloved Note 4. I got this casing through some seller. Not phone shops. Since I'm from Singapore, these kind of rugged and full protective cases are not available unless by ordering them through official website or Amazon.
Was surprised that there was a seller who's selling this here. Since it's a case that I've been aiming for, I decided to grab it rightaway.
The case itself is divided into 2 parts. The rubber and the hard plastic holding the screen protector. Putting it all together was quite snappy. I can say it's not too bulky or too small. Just nice.
Opening it up, it's nicely pack into a compact box. Also there'a a plastic covering the front and inside of the screen protector. No defects. I don't use the holster since it will be troublesome for me. Moving on.
Here is the link to the official site:
http://www.supcase.com/samsung-galaxy-note-4-unicorn-beetle-pro-protective-case.html
Here comes the review!!
The Pro's:
All ports covered. Including the S-Pen.
Only protector for screen. None on LED, Sensor, Front Speaker, Front Camera and Back Camera.
It's quite light if without holster.
Smooth and easy if kept in pocket. Not gonna be stuck like some cases if u try to keep and remove in n out from your pocket.
Volume, Power Button casing design is align well.
The Con's:
Fingerprint Scanning will be abit difficult as the case actually interfere with the button.
The port covers will be out of shape if continuously opened up.
Due to the smoothness of the case, it might just slip from your hands.
That are the ones that I noticed for now.
I attached 2 pics, front and back. Sorry for the lack of details and pics as I'm currently at work. LOL! Hope my review help for those who are looking to buy this case.
Click to expand...
Click to collapse
I too have the same Unicorn Beetle case- cheap alternative for Overpriced Defender ( otterbox )..but fingerprint scanning is difficult due to front of case jutting out, so your finger doesnt get a flat
area to run across. Holster is decent- but somewhat stiff. but for 20.00... 1/3 the price, I'm happy. Phone is protected.. until a better option comes around...with a holster.
E4gt007 said:
I too have the same Unicorn Beetle case- cheap alternative for Overpriced Defender ( otterbox )..but fingerprint scanning is difficult due to front of case jutting out, so your finger doesnt get a flat
area to run across. Holster is decent- but somewhat stiff. but for 20.00... 1/3 the price, I'm happy. Phone is protected.. until a better option comes around...with a holster.
Click to expand...
Click to collapse
I learnt a trick. U redo ur fingerprint scanning with the case on. U can do in any position and ways as long u do slow and steady. U'll find that it works better with the casing on rather than naked. For my N4, i just have to scan the top of my thumb and otz unlocked. Give a try. Just scan follow the flow of the casing design. From top till the casing.
Hi guys,
I finally got around to doing a review on the Moko Heavy Duty Case for my 6P. I ordered this on amazon.ca. I've rocked this case for about a week now since I did that video, and I am pleasantly surprised.
The cutouts are precise, and the case does not look or feel cheap. The fingerprint scanner is easy to use still as well. The plastic is pretty soft, and I don't think it would stay on on its own without the black shell, but it does fit perfectly. Also, didn't notice much pocket lint or anything else sticking to it like some have reported. Overall it's a great option for a more rugged case for the Nexus 6P, especially here in Canada, where the options can be sparse. Here's the link from amazon.
Nexus 6P Case - MoKo [Heavy Duty] Full Body Rugged Holster Cover with Swivel Belt Clip - Dual Layer Shock Resistant for Huawei Google Nexus 6P 5.7 Inch Smartphone 2015, PURPLE https://www.amazon.ca/dp/B00JP6J1A0/ref=cm_sw_r_other_awd_HnYMwbXKYG11S
11 bucks plus tax, and since I have PRIME, also got free 2 day shipping. Yes, I have a compulsive online shopping problem...
I will also post reviews for my Spigen Rugged Armour and a Poetic Revolution cases shortly.
https://youtu.be/k2k6gPdRPUY
Sent from my Nexus 6P using Tapatalk
I've got one in blue but I don't use it anymore. It's a pretty nice case and the quality is fantastic I just wish they would stop putting those huge bumps on the back for no reason. They serve absolutely no purpose and double the thickness of the phone. They do this on these cases for all phones and just still makes no sense.
RED ZMAN said:
[...] I just wish they would stop putting those huge bumps on the back for no reason. [...]
Click to expand...
Click to collapse
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
daniels220 said:
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
Click to expand...
Click to collapse
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
RED ZMAN said:
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
Click to expand...
Click to collapse
I have the black version. Based on the pictures on Amazon the colors looked like they'd be pretty in-your-face, especially since the highlight color is visible directly around the edges of the screen. I'm afraid I don't have any holsters—I've never used one.
I realize, I forgot to mention the most important thing! The headphone and USB-C cutouts on this case, as shipped, are not large enough for most cables. The stock USB-C cable fits but scuffs the sides, many high-quality third-party cables won't, and the only headphone plugs that will fit are the super-tiny ones that some headphones have for exactly this reason. But! If you have a decent utility knife, some courage, and a steady hand, it's possible to enlarge the cutouts without messing up the case. (I cut away a tiny bit of the TPU near the jacks as well, since it was being deformed when plugging in a cable.) With this done it works beautifully—the case is even thin enough to use a Square credit-card reader in the headphone jack.
I bought the clear case. TMobile sells them. Compared to other minimal cases i have had in the past (and one other Amazon case for the note7) it seems better. It hugs the curves ans shape of the device perfectly, and the holes line up EXACTLY which often isn't the 'case' for 3rd party cases. It's also very thin and light and on my silver note7 it's hardly noticeable.
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
ekerbuddyeker said:
I bought the clear case. TMobile sells them. Compared to other minimal cases i have had in the past (and one other Amazon case for the note7) it seems better. It hugs the curves ans shape of the device perfectly, and the holes line up EXACTLY which often isn't the 'case' for 3rd party cases. It's also very thin and light and on my silver note7 it's hardly noticeable.
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
Click to expand...
Click to collapse
Any pics?
Any chance for photos?
I'm interested in that case but there seems to be no real photos of it. It's the same cg ones you find on all sites.
It's a hard case isn't it, do you have pictures? How much did you pay
Femmetechstic said:
It's a hard case isn't it, do you have pictures? How much did you pay
Click to expand...
Click to collapse
its $20ish. Will post pictures when I can figure out how to do so as I sold my Note5 already!!. Its a very soft TPU case.
I have been looking for photos, videos and reviews of this case too but they seem non existent so far. Whatever info you can post would be great.
I've been into slim clear cases for a long time. I'd like to appreciate the body down to its finest lines and curves, caressing its smooth texture, feeling the little tips and points where they sprout along the edges, admiring the beauty that is gleaming in front of me, wanting to grab........ok well you get the point. I risked my phones going naked for these reasons for a long time, but alas, the Note 7 might require a case from me.
Anyways, I would search high and low for thin slim clear cases that would
1) wont produce so much fingerprint smear
2) smooth as buttah
3) wont stick to the glass backing and create a rainbow effect
4) doesnt have sharp lips
5) its flush against the edges.
Now yes, it does attract fingerprints but less so since its soft TPU and I've come to accept the annoyance that comes with using clear cases that its inevitable. Aside from that it meets the rest of my requirements. Not all soft TPU cases are alike. This particular O.E.M clear case feels good in the hands. Soft, smooth (almost like hard plastic), and at times grippy. I unfortunately do not have pictures to show but may post them later. If you are highly interested, I suggest stopping by your local t-mobile store to try it on first. If you like it buy it, if not keep searching. Good luck! :good:
I ordered this case and and I really like it but I'm a fan of slim/minimalistic cases that showcase the design of phones. The material is a soft rubber(?) not a hard shell. It's clear so it does show a lot of fingerprints but it fits the phone perfectly. The case feels tacky/grippy so the phone feels extra secure when you're holding it.
Imgur Album:
http://imgur.com/a/hEIGe
A similarly thin spigen is only $10 bucks.
chunology said:
I ordered this case and and I really like it but I'm a fan of slim/minimalistic cases that showcase the design of phones. The material is a soft rubber(?) not a hard shell. It's clear so it does show a lot of fingerprints but it fits the phone perfectly. The case feels tacky/grippy so the phone feels extra secure when you're holding it.
Imgur Album:
http://imgur.com/a/hEIGe
Click to expand...
Click to collapse
Thanks for the pictures. I like it.
Got this one as well. Got the Note 7 starter pack from Samsung which contained
TPU case clear
2 pcs screen protector
1 pc tilted wireless charger
Pros: tpu case is very minimal in when it comes to thickness so thats a plus.
Con: it doesnt have raised edges. So if you placed your phone upside down, the screen itself would be touching the table. And worse, if you drop it face down, the screen would take much of the impact
Screen protector:
Pro: its a curved platic screen protector so it wraps on the edges
Con: its thicker than your usual screen protector. Almost as thick as those invisashield ones. The more important negative on this, since it wraps around the whole screen even the edges. When i bought a Spigen Liquid Crystal case (for raised edges). When i slipped it on, it peels the side of the screen protector.
Tilted wireless charger is a tilted wireless charger. Nothing to comment except that it takes getting used to. Its just easier to charge with the flat version when it comes to just dropping your phone. Tilted one requires a little more alignment
mtsingson said:
Got this one as well. Got the Note 7 starter pack from Samsung which contained
TPU case clear
2 pcs screen protector
1 pc tilted wireless charger
Pros: tpu case is very minimal in when it comes to thickness so thats a plus.
Con: it doesnt have raised edges. So if you placed your phone upside down, the screen itself would be touching the table. And worse, if you drop it face down, the screen would take much of the impact
Screen protector:
Pro: its a curved platic screen protector so it wraps on the edges
Con: its thicker than your usual screen protector. Almost as thick as those invisashield ones. The more important negative on this, since it wraps around the whole screen even the edges. When i bought a Spigen Liquid Crystal case (for raised edges). When i slipped it on, it peels the side of the screen protector.
Tilted wireless charger is a tilted wireless charger. Nothing to comment except that it takes getting used to. Its just easier to charge with the flat version when it comes to just dropping your phone. Tilted one requires a little more alignment
Click to expand...
Click to collapse
Is this a package you can buy or did you get this package included when you purchased your phone?
soulofdeath0 said:
Is this a package you can buy or did you get this package included when you purchased your phone?
Click to expand...
Click to collapse
its a package I could buy. the Samsung stores here in the Philippines have them. Not sure if they were released in all countries
my phone came with a free VR
heres an image of the Starter Kit. sorry isnt the best photo, just took a quick photo to show my friends to get one
Does the case have dotted imprint on the back to prevent it from sticking to the back of the phone?
Sent from my SM-N930T using Tapatalk
aznmode said:
Does the case have dotted imprint on the back to prevent it from sticking to the back of the phone?
Sent from my SM-N930T using Tapatalk
Click to expand...
Click to collapse
Yes.
Sent from my SM-N930T using Tapatalk
RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.
I've got one and I agree that the volume buttons are too stiff. I had to play / force them in and out with my plastic card holder edge to soften them a bit.
The lateral part are not that "firm" around the phone so unfortunately it feels a bit flabby.
It still makes the phone bulky, but according to one YouTube video where the guy toss the phone very high a few times without the phone being damaged at all, the protection is REALLY good.
roaduardo said:
RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.
Click to expand...
Click to collapse
I meant to do a review of the rhinoshield to warn everyone how awful they are. I had the exact same esperience as you and to add insult to injury, when I contacted the company to voice my concern they wanted me to ship it back with me paying for the shipping and would only accept it if it was BRAND NEW WITH NO SIGN OF WEAR. Really? Very bad customer service and crappy product..
Sent from my SM-N960U1 using Tapatalk
eurominican said:
I meant to do a review of the rhinoshield to warn everyone how awful they are. I had the exact same esperience as you and to add insult to injury, when I contacted the company to voice my concern they wanted me to ship it back with me paying for the shipping and would only accept it if it was BRAND NEW WITH NO SIGN OF WEAR. Really? Very bad customer service and crappy product..
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
That why I bought that case from Amazon. Can't beat Prime.
I had Rhino bumper on SGS7, totally agree with you. Hard buttons and slipery material. My buttons chopped off after almost a year of wear and tear.
My gf is using Ringke Fusion (clear back case) + dbrand skin. It looks beautiful so I ordered same case for Note9 + dbrand skin. It looks much better with lighter skins. Darker skins looks great when there is enough light around you. In low light it acts almost like a mirror.
https://imgur.com/QTYcakg
No way I go back to Rhyno again. It's not bumper case but I don't mind to flip it over and show camo skin
roaduardo said:
RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.
Click to expand...
Click to collapse
The only way you can fix the button issue, is get an Stanley blade and cut the sides of the button.. So the top and the bottom of the button is the only place where the plastic is connected.. Then they will be so easy to press!
I did that on my case on day 2, it helps but I wouldn't say it is enough. At the end, when my Rhyno bumper buttons wear I even tried to cut them out and flatten the area around button. I've got choped case with holes where buttons are placed and it was bad experience. Hard plastic, rough edges, not easy to dig and not pleasant to fingers. Too bad, unfortunately, I've used cases on same phone (sgs7 like I said) with much more tactile buttons so I gave up on Rhyno.
N1NJATH3ORY said:
The only way you can fix the button issue, is get an Stanley blade and cut the sides of the button.. So the top and the bottom of the button is the only place where the plastic is connected.. Then they will be so easy to press!
Click to expand...
Click to collapse
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?
roaduardo said:
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?
Click to expand...
Click to collapse
I think what’s happened as Rhinoshield get there case made in China, plus they purchase in bulk, there has been a manufacturing defect...
So at the moment Rhinoshield are stuck with the defect stock, I asked the exact same thing they would not answer me.. LOL
Razor blade is your only option! Some user say it works fine others say it dont so it's your call!
Or you can wait until they get rid of this stock and order more stock without defect! But that could be in the note 10 days!
Plus they aren’t telling me when they will get new stock, so I am guessing!
roaduardo said:
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?
Click to expand...
Click to collapse
I honestly don't think I've ever been pleased w/Rhinoshield's bumpers.
I gave 'em a shot only after this design/model from Nillkin disappeared,in the Note 3/4/5 days (guessing you had one) :
Supcase had something similar,but,it's nowhere to be found on devices from the past 2-3 yrs as well.
Anyhoo,I think the problem w/Rhinoshield is their marketing pitch is strength/brute protection & if they pared down the overall width/thickness & eased-up on the button stiffness,they'd fail on that account.
IIRC,I 1st gave Rhinoshield a shot w/the S8+ & found the fit to be way too loose. IDK how the button situation was,as I returned it as soon as I got an RMA.
The exact opposite w/the S9+,a very snug fit,but,the construction lended itself to adding too much width to the grip & the buttons were stiff.
It got little use & I tossed it in the garbage soon after taking delivery.
IDK why no one steps up to the plate & makes a backless bumper that has a decent fit/low profile & usable buttons,or,for that matter,just have cutouts for the buttons.
I get it on the less popular phones,but,I'd think it'd be profitable for at least one mfg (if not Samsung themselves) to make such a bumper for the Galaxy S & Note lineup.
I suppose we shouldn't be surprised,as we've seen feature loss since the good 'ol Note 4 days,the same applies to case variety....................................
KOLIOSIS said:
I honestly don't think I've ever been pleased w/Rhinoshield's bumpers.
I gave 'em a shot only after this design/model from Nillkin disappeared,in the Note 3/4/5 days (guessing you had one) :
Supcase had something similar,but,it's nowhere to be found on devices from the past 2-3 yrs as well.
Anyhoo,I think the problem w/Rhinoshield is their marketing pitch is strength/brute protection & if they pared down the overall width/thickness & eased-up on the button stiffness,they'd fail on that account.
IIRC,I 1st gave Rhinoshield a shot w/the S8+ & found the fit to be way too loose. IDK how the button situation was,as I returned it as soon as I got an RMA.
The exact opposite w/the S9+,a very snug fit,but,the construction lended itself to adding too much width to the grip & the buttons were stiff.
It got little use & I tossed it in the garbage soon after taking delivery.
IDK why no one steps up to the plate & makes a backless bumper that has a decent fit/low profile & usable buttons,or,for that matter,just have cutouts for the buttons.
I get it on the less popular phones,but,I'd think it'd be profitable for at least one mfg (if not Samsung themselves) to make such a bumper for the Galaxy S & Note lineup.
I suppose we shouldn't be surprised,as we've seen feature loss since the good 'ol Note 4 days,the same applies to case variety....................................
Click to expand...
Click to collapse
I'm tempted to try and modify one of Supcase's clear backs but the razor knife that I have doesn't seem strong enough to slice through that kind of plastic because I've tried to modify some other cases I have to create a backless case. It's so, so, so stupid that case makers don't see the benefits of a bumper-only design. It's frustrating for users like me who don't drop their damn phones all the time. I haven't used a screen protector since my iPhone days and my displays have always been great during the time I've had them until I sold/donated them off to another user.
If only I could find some kind of rubber band material that I can wrap the edges of my phone. That's something that these case makers could do. Make rigid edges (with soft, clicky buttons) but top and bottom elastic material so there's a tight fit. Does that make sense? Because getting the phone in and out of a RhinoShield bumper case is difficult. Yet another design issue with their cases.
roaduardo said:
I'm tempted to try and modify one of Supcase's clear backs but the razor knife that I have doesn't seem strong enough to slice through that kind of plastic because I've tried to modify some other cases I have to create a backless case. It's so, so, so stupid that case makers don't see the benefits of a bumper-only design.
Click to expand...
Click to collapse
I've tried modding a few cases where it had a clear distinction from the bumper part of the case & the back cover portion.
Same here,no success,as the remaining bumper didn't have enough rigidity to hold shape.
roaduardo said:
If only I could find some kind of rubber band material that I can wrap the edges of my phone. That's something that these case makers could do. Make rigid edges (with soft, clicky buttons) but top and bottom elastic material so there's a tight fit. Does that make sense? Because getting the phone in and out of a RhinoShield bumper case is difficult. Yet another design issue with their cases.
Click to expand...
Click to collapse
I totally get your design idea.
It's a different take on the 2pc metal bumper design,but,w/o the necessary assembly (screws). Remove the screws from the design,build-in some elasticity on two of the sides for easy removal-installation,yet,still holding shape & retaining edge protection.
That's actually a very nice idea,perhaps you have a friend or two who have some experience w/CAD software & sell the idea/patent/etc.... to one of the case mfgs...................
KOLIOSIS said:
That's actually a very nice idea,perhaps you have a friend or two who have some experience w/CAD software & sell the idea/patent/etc.... to one of the case mfgs...................
Click to expand...
Click to collapse
If only I had the time and resources. I'm happy to see someone else take this kind of thing and run with it so I can just get myself one case. I just need one for my 6T and one for my Note 9. lol
I got the rhino shield bumper, no trouble with the buttons, just not as clicky as I would like. It is also quite slippery and doesn't stay put on the vehicle dash.
With that said, my dbrand grip should be here in a week or so, it is the best case I have had, and loved it on my note 8. They are taking preorders still for shipment in Feburary, so check them out for a bumper style case.
Sent from my Samsung SM-N960U1 using XDA Labs
nuclearrage said:
I got the rhino shield bumper, no trouble with the buttons, just not as clicky as I would like. It is also quite slippery and doesn't stay put on the vehicle dash.
With that said, my dbrand grip should be here in a week or so, it is the best case I have had, and loved it on my note 8. They are taking preorders still for shipment in Feburary, so check them out for a bumper style case.
Click to expand...
Click to collapse
Is it wrong to assume the dbrand grip would be almost impossible to pocket?
I was just about to order the Rhino Shield.
Dbrand is slightly bigger, but very VERY grippy. I wear Duluth Trading Co. Cargo pants and always have 2 phones in the front left cargo pocket.. also fits in my work shirt front pocket. Not sure about jeans or skinny fitting clothes.
Sent from my Samsung SM-N960U1 using XDA Labs
One thing that I really do not like the look of with this case is that there are no raised buttons. The sides of the case appear to be flat, which would make it hard to find the right buttons you're looking for in a pinch or when the phone is inside your pocket or bag.
It's the one thing that's holding me from ordering this case. It looks pretty thick. That's fine but in my opinion if the case is going to be a bit thick you may as well have easily accessible raised buttons on the sides.
I just wish, considering the advancement with 3D print tech, that we could just design our own unique case for our phones. A case the way we want/need it. Like, if I could just have one of Spigen's cases but just the bumper, just the edges and no backing.
roaduardo said:
One thing that I really do not like the look of with this case is that there are no raised buttons. The sides of the case appear to be flat, which would make it hard to find the right buttons you're looking for in a pinch or when the phone is inside your pocket or bag.
It's the one thing that's holding me from ordering this case. It looks pretty thick. That's fine but in my opinion if the case is going to be a bit thick you may as well have easily accessible raised buttons on the sides.
I just wish, considering the advancement with 3D print tech, that we could just design our own unique case for our phones. A case the way we want/need it. Like, if I could just have one of Spigen's cases but just the bumper, just the edges and no backing.
Click to expand...
Click to collapse
It may have different texture for the buttons for us to feel them.
If you scroll a bit the page, you may see it.
dfwfreaks said:
Never like rhinoshield case.
They don't know how to make cases
Click to expand...
Click to collapse
It's CrashGuard #3 for me today. Trying this case out for third time since it's the only viable option today for a bumper-only case.
I followed the advice of some users who suggested using a razor to slice into parts of the volume button grooves in order to make them more tactile. I'm happy to report that it worked pretty well. The buttons are actually registering clicks much easier than out of the box. Just to make it easier, I did the same thing for the power and Bixby button.
The other problem I had with this case is the area around the S-Pen makes it very difficult to remove the S-Pen. It's too small. I have average-sized hands and I have to use my pinky in order to get the S-Pen to eject. So I also modified that area and make some incisions with my razor. Then there's how tight the case can be as you try to put it on so skins can be pushed from the edges as you can see from the photos.
I just can't stand RhinoShield's tone-def response to criticisms to their CrashGuard cases. You have users reporting defective design features and they do nothing but push back with their half-baked suggestions to make their product work instead of correcting their design flaws.
They need to listen and stop deflecting. Spigen needs to also listen to us and give us a bumper-only solution.
dfwfreaks said:
Just get a tempered glass screen protector and D brand skin, bruh.
Click to expand...
Click to collapse
Already had the Dbrand on for weeks and I've never used a screen protector on any Android phone. Last time I used a screen protector was on my iPhone 4s.
I see a lot of the cases don't actually offer any hinge protection and if you drop the phone right on the edge with the hinge, something might break.
I am looking to see what cases with hinge protection are available. So far I have only found 1 : Spiegen Tough, but it is bulky, personally I am looking for something more minimalistic.
Are there any other options?
I have preordered the UAG Civilian Series Case. But I guess it’s also pretty bulky
I've found this one. Will be giving it a go when I get mine in a couple of weeks - https://www.mobilefun.co.uk/araree-nukin-360-samsung-galaxy-z-flip-3-case-crystal-clear-85997
What i found so far:
Spigen Tough Armor
UAG Civilian
VRS Active
Araree Aero Flex
Araree Nukin 360
Goospery ZFLP3
Mercury Fard (same as Goospery)
I returned Tough Armor as i find it's too bulky for me... will give Araree and Goospery a try
I want something like the araree aeroflex but clear!
D4rk4 said:
I want something like the araree aeroflex but clear!
Click to expand...
Click to collapse
Samsung make clear case with ring. I’ll be getting for free with my preordered Zflip 3, but I opted for VRS case.
Spec-V said:
Samsung make clear case with ring. I’ll be getting for free with my preordered Zflip 3, but I opted for VRS case.
Click to expand...
Click to collapse
I ordered one in the first place, too. But its a pain to plug the loose parts and phone together and it gives minor hinge protection as the strip is way too narrow and the ring can touch or scratch the hinge in your pocket as well in some angles...
btw. meanwhile i got the Goospery/Mercury Case here, it's nice looking and feeling but sits very loose (i don't use the adhesive tape at first) so that the top part of the case detaches from the phone when flipping open, very annoying :/ my hopes are for the araree aero flex now, should get it delivered these days...
I've ordered the araree aeroflex. Will report back when it arrives in a week or two.
I got my Araree aero flex today and i'm in love... perfect fit, perfect feeling BUT there is one big problem: when the phone is fully closed and i open it the hinge protection doesnt slide properly inside the lower case. It needs a little push with the finger. I improved it by putting a little Tesa on the inside of the lower case (above the factory sticker which should NOT be removed) and now it slides better but not everytime...
Whatever you do, stay away from that Samsung clear case with the ring. First case in my life that I had to read the user guide and search YouTube on how to install on phone.
Two pieces of plastic, that hold the ring, has to fit perfectly between the case and the phone. If they are not align properly, the case will not fit the phone. And it's almost impossible to align that s**t. It has no adhesive to keep it in place.
Went with the Spigen Tough Armor case myself and yeah like someone else said, it's definitely bulky (thick as a pack of cigarettes when closed) but it looks like it will offer very good protection, and I work in the construction industry so I'll take all the protection I can get.
Just noticed another Flip 3 case with hinge protection on Etsy, I dont know nothing about the seller (always bought the wallet cases from the seller "Hand & Hide" from USA on there for my slab phones) but these from the seller "Andantannerie" (from South Korea) look interesting, although $115 is a bit expensive, if they're actually full grain leather they just might possibly be worth it (but upon closer inspection of the pics they look like they might be made from a very thin layer of leather over a plastic shell though)......... https://www.etsy.com/listing/1060335374/premium-leather-galaxy-z-flip-3-case-3?ref=shop_home_recs_1&crt=1&variation0=2201540456
UPDATE: No doubt about it the leather is paper thin, sent the seller an email asking about it and he replied it was 2.5 to 3.5mm thick (about a tenth of an inch) and I replied as to whether that was the thickness of the entire case itself or the leather covering on it, in turn he sent me a photo of him measuring it and he was measuring the thickness of the entire case. Got to give him credit the cases do look nice on his product pics though, but not no where near a $115 nice.......
HDCowboy said:
Went with the Spigen Tough Armor case myself and yeah like someone else said, it's definitely bulky (thick as a pack of cigarettes when closed) but it looks like it will offer very good protection, and I work in the construction industry so I'll take all the protection I can get.
Click to expand...
Click to collapse
Ordered the same one. Wasn't sure about the adhesive, but after 5 different installations (trying various cover screen protectors), it still holds without any of the wiggle or creaking you get on an Otterbox that clips together. It isn't the most amazing hinge protection, but its enough. The case feels less bulky the more I use it and definitely makes the phone feel more sturdy.
I bought an Araree AERO Flex for my Flip 3 and it works fine. It was available on Amazon but became unavailable shortly after I got mine. It is not bulky and has hinge protection. Feels good in hand too. This case does not require any adhesive tape or pad. It just snaps onto the phone securely.
Just check Amazon from time to time and it could be available again. Maybe it is out of stock due to popularity.
I have the same araree case. Great case, no bulk, feels nice in the hand, smudge free. Definitely recommend it.
chompx2 said:
I bought an Araree AERO Flex for my Flip 3 and it works fine. It was available on Amazon but became unavailable shortly after I got mine. It is not bulky and has hinge protection. Feels good in hand too. This case does not require any adhesive tape or pad. It just snaps onto the phone securely.
Just check Amazon from time to time and it could be available again. Maybe it is out of stock due to popularity.View attachment 5407609View attachment 5407611View attachment 5407613View attachment 5407615
Click to expand...
Click to collapse
D4rk4 said:
I have the same araree case. Great case, no bulk, feels nice in the hand, smudge free. Definitely recommend it.
Click to expand...
Click to collapse
does your aeroflex cases flip open smoothly when fully closed or do you have to give the hinge protection a little push?
It does now. On the first night I got it, I did have to place my finger over the hinge protection a couple of times to help push it down. But it seems to have sorted itself out now.
I did take it off and put it back on on the 2nd day, so maybe it wasn't sat properly the first time I put it on?
When it was new, the hinge cover did not slide into the slot smoothly. It even pushed the bottom case down when I opened the phone from the closed position. It was not a big deal as I could easily push up the bottom half of the case back up. I took the case off the phone and examined it but found nothing out of the ordinary. After I reinstalled the case, it never happen again. After some use, the hinge cover is sliding back into the case fine. However, if I open the phone rapidly, the hinge cover would bulge out and then snap back into the case. Never, did require me to push on it to help it to slide back. A new car would require some run-in period for its engine. I expect this hinge cover should soften up and loosen up after some more use.
chompx2 said:
When it was new, the hinge cover did not slide into the slot smoothly. It even pushed the bottom case down when I opened the phone from the closed position. It was not a big deal as I could easily push up the bottom half of the case back up. I took the case off the phone and examined it but found nothing out of the ordinary. After I reinstalled the case, it never happen again. After some use, the hinge cover is sliding back into the case fine. However, if I open the phone rapidly, the hinge cover would bulge out and then snap back into the case. Never, did require me to push on it to help it to slide back. A new car would require some run-in period for its engine. I expect this hinge cover should soften up and loosen up after some more use.
Click to expand...
Click to collapse
Which case?
twistedumbrella said:
Which case?
Click to expand...
Click to collapse
Araree AERO Flex.