Database Info

[Tool][Unbrick][Reset][Fix for bad Signal] Stock Firmware

Unbrick tool by One-Team - EypCnn
First: This tool seems to be from EypCnn, One-Team. All credits to them!
EDIT2: I no longer own this device, so i will leave this thread here for people to use. But don't expect any direct support from me .
What can this tool do?:
Restore phone to Stock(International) Firmware (S048) Marshmallow (Locked & Unlocked bootloader)
Fix Lost or bad Signal / IMEI any software Problem
For who does this work?
Pretty much any Lenovo P2 Variant (Chinese and International)
Phones which can access bootloader(you have to boot into it)
Works on Locked & Unlocked Bootloader
Installation aka. Flashing-Steps
Put your phone into bootloader (which is also fastboot) mode.
Download the folder and unzip it.
Connect your phone to your pc.
Go into the unzipped folder and open "flashall - stock reco.bat"
Wait, for the process to end, your phone will reboot on its own.! A stock lenovo bootlogo will show up !
You can disconnect your phone cable from pc and plug into a wall charger, just to be safe. Once the lockscreen is showing up, you're done.
If you want to flash Custom Roms:
look below:
WHEN MOVING TO CUSTOM ROMS NOW:
1. Boot to twrp. (Make sure it is pietwrp from telegram or the official 3.2.3 or later version)
2. Select WIPE menu option
3. Select data partition
4. Change file format to f2fs or anyother.
5. Go back to Start Menu of TWRP, choose Reboot Menu Option
6.Reboot to Recovery
7. Repeat Steps 2 and 3
8. This time select EXT4 when changing file format
9. Do Step 5 and 6
10. Wipe System,Cache and Dalvik-Cache partitions
( for older twrp versions: 10.1 If you're on official twrp 3.2.3 or lower, you have to flash pietwrp or latest twrp now !)
11. Flash your Custom Rom, Gapps (optional) and latest Magisk(optional)
12. Wipe Cache and Dalvik-Cache
13. Reboot. First Boot might take a few minutes but never longer than 7minutes.
If it takes longer, you're encounter a so called bootloop.
Comment hear if that happens, containing information on your twrp-version, rom, gapps, magisk and mods(if present) you're using.
When you corrupt your internal Storage or geht TWRP Error 1001, Error 7:
1. Repeat steps 2-6
2. Repeat steps 7-8
Download(Official Link)
2nd Link(reuploaded because some couldn't download it from androidfilehost): https://drive.google.com/open?id=1wUOZiTwW8mo0IheAGONyj9-QnjimnY2M
I will help if questions arise.
Credits to One-Team & EypCnn.

Thanks a lot. You literally saved my life!

Works like Magic
Thanks a lot for saving my ass . simplest way to downgrade to mm too. Thanks again

Wait.... downgrade to MM? Does this mean you can regain your signal or did @krishnakoonala get it wrong?
I have a spare P2 lying around that I never used because the IMEI got corrupted and I couldn't flash the bootloader files since I was unlocked.
I assume this wouldn't solve my issue?

eried1 said:
Wait.... downgrade to MM? Does this mean you can regain your signal or did @krishnakoonala get it wrong?
I have a spare P2 lying around that I never used because the IMEI got corrupted and I couldn't flash the bootloader files since I was unlocked.
I assume this wouldn't solve my issue?
Click to expand...
Click to collapse
My p2 was bricked and , stuck in boot loop. I followed the above instructions, 10 mins into it , it booted with mm version, the same version when i bought and booted for 1st time. It was like a new phone to me.
So i assume if one has upgraded to noughat and want to downgrade but is worried he might brick his device, one can take a back up and try this tool. It works flawless.
No harm in trying this one if ur p2 can boot up mate. Give it a shot. Good luck
Cheers

This tool has saved my device from multiple over a span of two years soft bricks. Can confirm it to do wonders.

eried1 said:
Wait.... downgrade to MM? Does this mean you can regain your signal or did @krishnakoonala get it wrong?
I have a spare P2 lying around that I never used because the IMEI got corrupted and I couldn't flash the bootloader files since I was unlocked.
I assume this wouldn't solve my issue?
Click to expand...
Click to collapse
THis will solve your problem , Cheers.

I tried but cannot download it - do you where to find it?

can i flash this without pc?? if yes please tell how

@sm00th4f3 bro, i wanna know, does this tool flashes full ROM including modem files etc, even on unlocked bootloader?
What is the state of bootloader after using this tool?

amansehdav said:
@sm00th4f3 bro, i wanna know, does this tool flashes full ROM including modem files etc, even on unlocked bootloader?
What is the state of bootloader after using this tool?
Click to expand...
Click to collapse
It flashed everything you have when you buy a new phone. And no, it doesn't lock your bootloader.
So you can either :
- keep using MM Stock Rom S048
- Update via ota in System like you normally would do.
- Update till latest Firmware, then flash twrp- and then Custom Rom of your Choice.
Bootloader is in the same state it was before you used this tool.

sm00th4f3 said:
It flashed everything you have when you buy a new phone. And no, it doesn't lock your bootloader.
So you can either :
- keep using MM Stock Rom S048
- Update via ota in System like you normally would do.
- Update till latest Firmware, then flash twrp- and then Custom Rom of your Choice.
Bootloader is in the same state it was before you used this tool.
Click to expand...
Click to collapse
So how does it fixes corrupted modems? it cannot be flashed on unlocked P2 right?

amansehdav said:
So how does it fixes corrupted modems? it cannot be flashed on unlocked P2 right?
Click to expand...
Click to collapse
I literally just answered it above somewhere.
(Literally in thread description)
You can flash it on unlocked bootloader or locked as well.

So many thanks for bringing up tis tool for us!
This thread should be stick as the "New user" thread is, they definitely belong together.

Download source
Thanks guys, if this works I can now revive my phone. But can someone please upload the tool to another place like google drive. From android filehost it will take an eternity to download!

HkQc said:
So many thanks for bringing up tis tool for us!
This thread should be stick as the "New user" thread is, they definitely belong together.
Click to expand...
Click to collapse
I didn't bring it up, i just linked it . All Credits belong to ONE TEAM and EypCnn.
ryd3r89 said:
Thanks guys, if this works I can now revive my phone. But can someone please upload the tool to another place like google drive. From android filehost it will take an eternity to download!
Click to expand...
Click to collapse
Link updated, Cheers

Lavesh05 said:
can i flash this without pc?? if yes please tell how
Click to expand...
Click to collapse
Nah you need a Computer for this.

no signal after using "flashall - stock reco.bat", it finished successfully, but after rom setup still no signal

GPSSlovakia said:
no signal after using "flashall - stock reco.bat", it finished successfully, but after rom setup still no signal
Click to expand...
Click to collapse
If you used some other tool for imei. You are pretty much done for.

Using this tool i can go to MM version and can upgrade to S251. However after installing twrp and flashing custom rom, it goes to bootloader

[Guide] TWRP with Magisk on 10.0.4.0 Stock ROM

GSI IS DONE CHECK THE LINK BELOW, IT'S CURRENTLY IN PROGRESS BELOW IS THE STATUS ME WORKING ON IT
THE GSI PIE TUTORIAL
Grab these two files (Big Thanks to @Zerovoid from 4PDA, @Seryioo, and @mac12m99)
Fixed SDCard Support TWRP Image File (Download this and put this on your SDCard and Computer)-
Original Fixed TWRP XDA Post
Fixed SDCard Support TWRP Installer Zip (Download and put this on your SDCard)-
Fixed TWRP .zip Installer
But I got TWRP on 10.0.4.0 with magisk, and Justice Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA, SD CARDS, ETC
Start with the phone being on with USB Debugging enabled correctly and bootloader unlocked
Type: adb reboot bootloader
So flash the 10.0.4.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer -
aboot.img
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.

Reserved

Looks like I'll be updating and trying when I get home wish me luck..

rob420p said:
Looks like I'll be updating and trying when I get home wish me luck..
Click to expand...
Click to collapse
I'll have the GSI Tutorial up as soon as possible. Let me know if you run into any problems!

I am curious does the backup n restore work with this?

rob420p said:
I am curious does the backup n restore work with this?
Click to expand...
Click to collapse
Everything in TWRP works sir, it was already functional the only component missing in the original is the SD Card Support which is fixed in the TWRP above!

But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Sent from my Phh-Treble vanilla using Tapatalk

cd492 said:
But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Click to expand...
Click to collapse
From what I have read this is happening to allot of devices running pie not just our device

cd492 said:
But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Sent from my Phh-Treble vanilla using Tapatalk
Click to expand...
Click to collapse
That's weird, I'm running Android Pie on A2L and Wi-Fi looks great.
Have you tried performing a full wipe and flashing the stock ROM?
I had other issues which were fixed by flashing the stock ROM with a full wipe.
Tbh I don't think the patch updates are 100% trustworthy, so I simply update it manually.

cd492 said:
But why this tutorial when wifi isn't working than. I think everyone needs wifi.
Sent from my Phh-Treble vanilla using Tapatalk
Click to expand...
Click to collapse
lbsilva said:
That's weird, I'm running Android Pie on A2L and Wi-Fi looks great.
Have you tried performing a full wipe and flashing the stock ROM?
I had other issues which were fixed by flashing the stock ROM with a full wipe.
Tbh I don't think the patch updates are 100% trustworthy, so I simply update it manually.
Click to expand...
Click to collapse
This does not relate to this tutorial, there is nothing wrong with WiFi from this tutorial
I was talking about the GSI Tutorial I am making in the cyan text above nothing it wrong with this tutorial, if there was why would I post it

rob420p said:
Looks like I'll be updating and trying when I get home wish me luck..
Click to expand...
Click to collapse
Have you tested it?

InfinityXDA said:
Have you tested it?
Click to expand...
Click to collapse
Not yet I'm useing a new laptop and had trouble sitting up my cdrive I'll try again tonight

rob420p said:
Not yet I'm useing a new laptop and had trouble sitting up my cdrive I'll try again tonight
Click to expand...
Click to collapse
If you need assistance just let me know!

InfinityXDA said:
If you need assistance just let me know!
Click to expand...
Click to collapse
I main issue I was having was with mi flash for some reason when I check the Oreo Ron I can't find it in the files downloaded 5 times

rob420p said:
I main issue I was having was with mi flash for some reason when I check the Oreo Ron I can't find it in the files downloaded 5 times
Click to expand...
Click to collapse
You have to extract the file using WinZip, it's just like a .zip file. But after you extract the stock rom there should be another file in that extract that too and select the folder extracted folder with all of the .img in it in MiFlash.
You must have the Pie ROM to do this
Please make sure you have the latest ROM or latest patch from this link https://en.miui.com/getrom-354.html?

InfinityXDA said:
You have to extract the file using WinZip, it's just like a .zip file. But after you extract the stock rom there should be another file in that extract that too and select the folder extracted folder with all of the .img in it in MiFlash.
You must have the Pie ROM to do this
Please make sure you have the latest ROM or latest patch from this link https://en.miui.com/getrom-354.html?
Click to expand...
Click to collapse
Thanks this is a little different I'm used to Nexus or motorola devuces

rob420p said:
Thanks this is a little different I'm used to Nexus or motorola devuces
Click to expand...
Click to collapse
No problem I'm here to help!

Thanks for the nice Tutorial, the installation works fine.
Backup to the sd-card is now possible, but the restore doesn' work. It stops with this message:
Cannot restore System -- mounted read only

Linhx said:
Thanks for the nice Tutorial, the installation works fine.
Backup to the sd-card is now possible, but the restore doesn' work. It stops with this message:
Cannot restore System -- mounted read only
Click to expand...
Click to collapse
So it's not mounting right sounds like it can right but can't read

I found the solution here:
https://forum.hovatek.com/thread-15952.html
- Go to the TWRP Home Screen and select Mount
- Untick "Mount system partition read-only"
Restore was starting then, but after 99% this error appeared:
The extractTarFork() process ended with ERROR: 255
The device didn't start anymore and I had to set it up again.

Flashing from CN version to Global questions

Hey guys,
Im quite new to android and all that comes with it regarding flashing roms. Now i've had the mi mix 3 cn version since october and been wanting to flash to the global rom ever since. So far i have unlocked the bootloader only on my Mix 3. Now Ive started doing some experimenting with an old one plus 1 device of mine before i fully try it on my mix 3 (and **** it up) and so far been able to unlock bootloader and install twrp. But it seems i cant get through the rooting part because every time i download supersu.zip (on my mac) it doesnt actually show as a zip file. So when i copy/paste it into the oneplus directory and try to install through twrp, basically nothing happens because its not a zip file. Is the solution as simple as: " i should just download the same file using Windows??"
Magisk:
in order to root my my Mix 3 and Oneplus 1 i need to install and run Magisk. But after installing it and opening it, it always says 'Magisk is not installed" and under that "Magisk Manager installed".
Question 1: How to fix this.....
Question 2: Do i need to root my Mix 3 in order to flash the global rom?
Currently running MIUI 10.2 Stable 10.2.2.0(PEECNXM)
Many thanks!

Safari unzips after downloading. You can disable it in the settings I think.

TheArchangel123 said:
Hey guys,
Im quite new to android and all that comes with it regarding flashing roms. Now i've had the mi mix 3 cn version since october and been wanting to flash to the global rom ever since. So far i have unlocked the bootloader only on my Mix 3. Now Ive started doing some experimenting with an old one plus 1 device of mine before i fully try it on my mix 3 (and **** it up) and so far been able to unlock bootloader and install twrp. But it seems i cant get through the rooting part because every time i download supersu.zip (on my mac) it doesnt actually show as a zip file. So when i copy/paste it into the oneplus directory and try to install through twrp, basically nothing happens because its not a zip file. Is the solution as simple as: " i should just download the same file using Windows??"
Magisk:
in order to root my my Mix 3 and Oneplus 1 i need to install and run Magisk. But after installing it and opening it, it always says 'Magisk is not installed" and under that "Magisk Manager installed".
Question 1: How to fix this.....
Question 2: Do i need to root my Mix 3 in order to flash the global rom?
Currently running MIUI 10.2 Stable 10.2.2.0(PEECNXM)
Many thanks!
Click to expand...
Click to collapse
Flash magisk 19 then install the magisk app

TheArchangel123 said:
Hey guys,
Im quite new to android and all that comes with it regarding flashing roms. Now i've had the mi mix 3 cn version since october and been wanting to flash to the global rom ever since. So far i have unlocked the bootloader only on my Mix 3. Now Ive started doing some experimenting with an old one plus 1 device of mine before i fully try it on my mix 3 (and **** it up) and so far been able to unlock bootloader and install twrp. But it seems i cant get through the rooting part because every time i download supersu.zip (on my mac) it doesnt actually show as a zip file. So when i copy/paste it into the oneplus directory and try to install through twrp, basically nothing happens because its not a zip file. Is the solution as simple as: " i should just download the same file using Windows??"
Magisk:
in order to root my my Mix 3 and Oneplus 1 i need to install and run Magisk. But after installing it and opening it, it always says 'Magisk is not installed" and under that "Magisk Manager installed".
Question 1: How to fix this.....
Question 2: Do i need to root my Mix 3 in order to flash the global rom?
Currently running MIUI 10.2 Stable 10.2.2.0(PEECNXM)
Many thanks!
Click to expand...
Click to collapse
You do not need to root your device to flash it to the Global ROM. Unless you need root for something specific, I would suggest forgetting about TWRP and root and using fastboot to flash to the Global ROM. You can find the fastboot flashing guide, here. Click on fastboot, read the instructions, download the correct fastboot image for the Mi Mix 3, unzip it, boot your device into fastboot, connect it via USB to a Windows based machine, and run the flash_all.bat. The device will reboot when finished.

Thanks!
jcsww said:
You do not need to root your device to flash it to the Global ROM. Unless you need root for something specific, I would suggest forgetting about TWRP and root and using fastboot to flash to the Global ROM. You can find the fastboot flashing guide, "https://en.miui.com/a-232.html"]here. Click on fastboot, read the instructions, download the correct fastboot image for the Mi Mix 3, unzip it, boot your device into fastboot, connect it via USB to a Windows based machine, and run the flash_all.bat. The device will reboot when finished.
Click to expand...
Click to collapse
Ok thanks! Will definitly check it out. However i would like to get twrp working as well even just for the sake of it. But every time after i do the "reboot flash recovery rocovery.img" cmd it keeps booting into either the normal OS or into fastboot mode. Ive read about installing the force disable encryption zip file but how do i install that if i cant boot into twrp?

TheArchangel123 said:
Ok thanks! Will definitly check it out. However i would like to get twrp working as well even just for the sake of it. But every time after i do the "reboot flash recovery rocovery.img" cmd it keeps booting into either the normal OS or into fastboot mode. Ive read about installing the force disable encryption zip file but how do i install that if i cant boot into twrp?
Click to expand...
Click to collapse
Which TWRP are you flashing? When I was attempting to root my Chinese Mi Mix 3 running the GLobal Stable ROM, it was very hit and miss getting TWRP to stick. I couldn't get fastboot reboot-recovery to work for me so I had to power the device off after flashing TWRP and then hold Volume Up and Power until it vibrates again to get it into TWRP.
To root in that particular situation (Chinese device/Global ROM), you need to flash this region hiding thing right after you flash root. My device kept bootlooping so I gave up and used fastboot to debloat the ROM, which took a few minutes compared to the almost hour I spent on trying to get TWRP to stick and try to get the device rooted. This is one of my many gripes with Magisk root and how inferior it is to Chainfire's discontinued implementation.

Final stage!
Ok so my last post can be ignored as i was finally able to boot into twrp and also installed magisk so now my device is rooted.
I have now uploaded MIMIX3GLOBAL_V10.2.2.0 PEEMIXM into my phones directory.
Now before i install it thru twrp.... Do i need to wipe/erase/clean my phone first? Or can i just install it without doing so?
Many thanks in advance!

TheArchangel123 said:
Ok so my last post can be ignored as i was finally able to boot into twrp and also installed magisk so now my device is rooted.
I have now uploaded MIMIX3GLOBAL_V10.2.2.0 PEEMIXM into my phones directory.
Now before i install it thru twrp.... Do i need to wipe/erase/clean my phone first? Or can i just install it without doing so?
Many thanks in advance!
Click to expand...
Click to collapse
You can dirty flash it. It's just a minor update. The current beta will bring some new features though, once it is released in the next stable version.

jcsww said:
You can dirty flash it. It's just a minor update. The current beta will bring some new features though, once it is released in the next stable version.
Click to expand...
Click to collapse
Even though my current rom is the chinese version and i want to flash to a global version?
And how about if I flash to Mi Mix 3’s MIUI 10 Global Stable ROM based on Android 9 Pie (MIUI v10.0.11)??

TheArchangel123 said:
Even though my current rom is the chinese version and i want to flash to a global version?
And how about if I flash to Mi Mix 3’s MIUI 10 Global Stable ROM based on Android 9 Pie (MIUI v10.0.11)??
Click to expand...
Click to collapse
You can't dirty flash it...
Wipe in twrp
Install zip in twrp
format data in twrp
Reboot
If you want to root it you'll need the hardware origin magisk module that's somewhere in the mix 3 forums

Region, china?!
So i just clean flashed my phone and then formatted the data and rebooted. After i chose my language i have to choose my region, and the only option it gives me is China!????

TheArchangel123 said:
So i just clean flashed my phone and then formatted the data and rebooted. After i chose my language i have to choose my region, and the only option it gives me is China!????
Click to expand...
Click to collapse
China has the most content, it's not a bad thing. All themes become available etc

Mackay53 said:
China has the most content, it's not a bad thing. All themes become available etc
Click to expand...
Click to collapse
ok fair enough. However I have a situation now... after installing the process goes into a loop after selection china as region. The last small message it gives is "find device quit unexpectedly" and then it loops for 5 minutes untill it boots into recovery mode. Here i can only choose boot system (which will go into the same loop again), wipe data, or connect to MIUI assistent...
What did i do wrong?? Did i flash the wrong rom?

TheArchangel123 said:
So i just clean flashed my phone and then formatted the data and rebooted. After i chose my language i have to choose my region, and the only option it gives me is China!????
Click to expand...
Click to collapse
When cross-flashing, clean/factory reset is always the way to go. With TWRP though, there seems to be some sort of region options not changing issue. There are a few ways to work around it I personally never bothered with, but I have flashed two Chinese devices via fastboot with the Global Stable ROM and haven't ran into the region issue at all.

TheArchangel123 said:
ok fair enough. However I have a situation now... after installing the process goes into a loop after selection china as region. The last small message it gives is "find device quit unexpectedly" and then it loops for 5 minutes untill it boots into recovery mode. Here i can only choose boot system (which will go into the same loop again), wipe data, or connect to MIUI assistent...
What did i do wrong?? Did i flash the wrong rom?
Click to expand...
Click to collapse
Google miui region fix, download and flash and it should sort it

Mackay53 said:
Google miui region fix, download and flash and it should sort it
Click to expand...
Click to collapse
ok got the miui region fix. But how do i flash it... my phone wont boot into twrp anymore. Im also not sure how to get into fastboot either because it doesnt seem to connect if i type in the commands in cmd

TheArchangel123 said:
ok got the miui region fix. But how do i flash it... my phone wont boot into twrp anymore. Im also not sure how to get into fastboot either because it doesnt seem to connect if i type in the commands in cmd
Click to expand...
Click to collapse
Fastboot is the bootloader. Once you boot your device into the bootloader (Volume Down + Power), you can use ADB through the command prompt to flash TWRP or just flash the Global ROM properly. This thread on it is still very relevant and useful.

Got it!
jcsww said:
Fastboot is the bootloader. Once you boot your device into the bootloader (Volume Down + Power), you can use ADB through the command prompt to flash TWRP or just flash the Global ROM properly. This thread on it is still very relevant and useful.
Click to expand...
Click to collapse
Thanks guys, after a few long days ive finally succeeded to flash a global rom for the first time. Nxt step, try to get all my apps/data etc back. Hopefully i made a correct back up...

[hisense a6] custom reupload - R 02 (HLTE700T-L1488.6.09.02.00)

I made hisense a6 custom rom with yklaxds 's qpst package.
I merge system.img and modified rawprogram
i install gapps manually.
set security label and permission.
most function work very well.
ota update impossible. because of hisense's update is bonding partition
qualcomm package open now.
R02 HLTE700T-L1488.6.09.02.00.joygram
https://drive.google.com/file/d/1mgpOIClF0fgIkPc5rMth6VtNa0mJKG9z/view?usp=drivesdk
link may be block because heavy traffic by onedrive.
backup and share please.
R01 HLTE700T_L1488.6.04.01.00.joygram
https://1drv.ms/u/s!As0qoPp2K9MuaQeKFk-6PrnqfZ4
(onedrive blocked because heavy traffic, backup and share, please)
flashing method
https://1drv.ms/b/s!As0qoPp2K9MuaHBVpNnNPGkKl2M
nitice:
please use
rawprogram_30060000_joygram.xml only.
notice:
if appear password screen after flashing.
enter recover mode and factory reset
recovery mode :
power off : power button about 20 seconds over
volume_down + power : about 5 seconds and remove your fingers^^
notice:
WIP custom with L1488.6.09.02.00
if you brick, use TF recovery ROM
Link: https://pan.baidu.com/s/1Mkjvb9q_0oGuXZ0KLprJog extraction
code: j8qi
you can recover.
this instruction from official hisense forumn
2) Preparation before the T card upgrade:
1. Prepare a TF card and format the TF card into FAT format first;
2. Decompress the downloaded product software version (generally a compressed package and divide it into multiple compressed sub-packets) and copy the obtained folder named "HLTE700T_TF" to the root directory of the TF card.
3. Insert the TF card into your phone and put the battery in your phone. Make sure the battery is more than 50% charged. If the battery is low, please charge it first.
(three) T card upgrade process
1. Press and hold the “Volume+” and “Volume-” side buttons at the same time, then press the power button, the phone will automatically enter the T card upgrade mode for upgrade. If the phone does not enter the T card upgrade mode, please shut down. Repeat this operation.
2. Wait for about 5 minutes to complete the upgrade and a prompt for the upgrade to be successful.
3. Restart according to the prompt after successful upgrade. If there is no such prompt, press and hold the power button for more than 20 seconds to restart. After the upgrade, the first boot time is longer, which is several times of the normal boot time. Please be patient.
**
I am not chinese but korean

Thanks very much,
root the phone did you have method?

Maybe you can share your ways that how do you make it to let more people to discuss it. Thanks.
I will upload latest version QPST ROM, also from taobao.com. Please wait for me.
------------------------------------------------------------------------------------------------------------------
2019 5.16 version L1488.6.09.02.00 official ROM QPST:
https://drive.google.com/file/d/1IOxo79igLjPoldLmbP7eEM0W7UQpS3P-/view?usp=sharing

sdwshlsdx said:
Thanks very much,
root the phone did you have method?
Click to expand...
Click to collapse
Just add su file or root app like SuperSU? I dont know. Maybe have a try. You can just extract my ROM file(system.img files).

yklaxds said:
Maybe you can share your ways that how do you make it to let more people to discuss it. Thanks.
I will upload latest version QPST ROM, also from taobao.com. Please wait for me.
------------------------------------------------------------------------------------------------------------------
2019 5.16 version L1488.6.09.02.00 official ROM QPST:
https://drive.google.com/file/d/1IOxo79igLjPoldLmbP7eEM0W7UQpS3P-/view?usp=sharing
Click to expand...
Click to collapse
I will research more.
Thank you.

I flashed it according to your method. But now it's asking for password. How to proceed?

danjl said:
I flashed it according to your method. But now it's asking for password. How to proceed?
Click to expand...
Click to collapse
may be all partition not flashed.
check rawprogramming _joygeam.xml
if comment any partition with <!-- -->
remove this
i will check firmware and release soon
i am sorry for inconvenience

pengboby126 said:
Thanks a lot for this rom?
Is it possible to enable camera 2 api by modifying build.prop, which functions Gcam Port?
Click to expand...
Click to collapse
i tried but no gapps cam working.
if you know gcam for hisense a6
let me know.

joygram said:
may be all partition not flashed.
check rawprogramming _joygeam.xml
if comment any partition with <!-- -->
remove this
i will check firmware and release soon
i am sorry for inconvenience
Click to expand...
Click to collapse
How can I reset phone? It's not detected through usb anymore

danjl said:
How can I reset phone? It's not detected through usb anymore
Click to expand...
Click to collapse
dont worry.
you can recover with hisense TF Rom from fans.hisense.com ( hisense forum)
download tf rom and flashing.
I have files but can release next weekend.

sdwshlsdx said:
Thanks very much,
root the phone did you have method?
Click to expand...
Click to collapse
i am researching method with recovery.

joygram said:
may be all partition not flashed.
check rawprogramming _joygeam.xml
if comment any partition with <!-- -->
remove this
i will check firmware and release soon
i am sorry for inconvenience
Click to expand...
Click to collapse
joygram said:
dont worry.
you can recover with hisense TF Rom from fans.hisense.com ( hisense forum)
download tf rom and flashing.
I have files but can release next weekend.
Click to expand...
Click to collapse
EDIT: Yipee! It was asking for password. I booted to recovery by Hodling volume down+power. Then select an option to erase data, confirm by pressing volume up. It took a few minutes.
Then it booted with the custom rom!
So, anyone who comes across password can just erase their phone by booting into recovery.
Thanks to joygram! This works, so looking forward to having gapps on my phone now! Good luck to everybody.

danjl said:
How can I reset phone? It's not detected through usb anymore
Click to expand...
Click to collapse
Please try my hisense official flashing ROM.
https://drive.google.com/file/d/1IOxo79igLjPoldLmbP7eEM0W7UQpS3P-/view
---------- Post added at 05:06 PM ---------- Previous post was at 05:03 PM ----------
joygram said:
i am researching method with recovery.
Click to expand...
Click to collapse
Yep, we need twrp so that we can root or flasing GAPPS.

danjl said:
EDIT: Yipee! It was asking for password. I booted to recovery by Hodling volume down+power. Then select an option to erase data, confirm by pressing volume up. It took a few minutes.
Then it booted with the custom rom!
So, anyone who comes across password can just erase their phone by booting into recovery.
Thanks to joygram! This works, so looking forward to having gapps on my phone now! Good luck to everybody.
Click to expand...
Click to collapse
enjoy !!

So to summarize... If we get chinese version of A6 we can now flash this custom rom to have both :
- gapp (not available on chinese version)
- Widgets and full eink function (not available on russian version)
?

Yep, we need twrp so that we can root or flasing GAPPS.[/QUOTE]
->
I can not make twrp
I just merge system.img and install gapps manually.
so I can not root
but I will try

I used Magisk and patched boot.img in joygram's ROM. Then I replaced the original boot.img with partched one, and then used the same method with QFIL. It works!
But when you boot it reminds you device state is locked. However, Magisk is fully operational and I have used many modules already.

danjl said:
I used Magisk and patched boot.img in joygram's ROM. Then I replaced the original boot.img with partched one, and then used the same method with QFIL. It works!
But when you boot it reminds you device state is locked. However, Magisk is fully operational and I have used many modules already.
Click to expand...
Click to collapse
How do you change it? I also want root. Just like this way?
https://juejin.im/post/5b1bb43b5188257d5903045b
I want to make twrp but I don't know how to do it. Here no ways to teache me.
And can we unlock bootloader by ROM?

danjl said:
I used Magisk and patched boot.img in joygram's ROM. Then I replaced the original boot.img with partched one, and then used the same method with QFIL. It works!
But when you boot it reminds you device state is locked. However, Magisk is fully operational and I have used many modules already.
Click to expand...
Click to collapse
could you please boot.img release?

joygram said:
could you please boot.img release?
Click to expand...
Click to collapse
I'll upload it soon. Having some troubles with internet connection.
Thanks for the roms you uploaded.

How to install latest Arrow June update

Dear community
Hope all is doing fine, I am seeking assistance to know how to install this last update. because Everytime I end with soft bricking and had to revert back to an April version (currently installed) to have this working.
Any ideas how to install the last update smoothly without soft brick or wifi not working, etc?
Thank you!

SebixWolf said:
Dear community
Hope all is doing fine, I am seeking assistance to know how to install this last update. because Everytime I end with soft bricking and had to revert back to an April version (currently installed) to have this working.
Any ideas how to install the last update smoothly without soft brick or wifi not working, etc?
Thank you!
Click to expand...
Click to collapse
You need to go do a clean flash because ArrowOS moved to OSS vendor.
Install the fastboot ROM from here:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Unlock bootloader, install TWRP, flash ArrowOS, format "Data" and enjoy

So I need to download the 5gbs fastboot ROM in the link install it clean on my device with miflash and then do all the installing with TWRP as always?

SebixWolf said:
So I need to download the 5gbs fastboot ROM in the link install it clean on my device with miflash and then do all the installing with TWRP as always?
Click to expand...
Click to collapse
Yes. Use this TWRP:
myromupdates - Browse /surya/TWRP_brigudav at SourceForge.net
sourceforge.net
After installing ArrowOS, only format "Data" (format, not wipe). Don't do any other wipes before or after flashing ArrowOS

You are the man! @Noter2017 I follow your steps and sorry for the delay (too much work on my end) and now everything boot up and is working great so far.
Thank you!

SebixWolf said:
You are the man! @Noter2017 I follow your steps and sorry for the delay (too much work on my end) and now everything boot up and is working great so far.
Thank you!
Click to expand...
Click to collapse
I'm glad it worked. Enjoy your phone