hello guys i have a problem when i root the device
i unlock bootloader then reboot after that the device is looping cant start up
any fix or wipe option
tried vol up + power i got
<!>
i think its Brick so any unbrick tool
Related
I went through the process of rooting and then unlocking the bootloader based on this thread:
http://forum.xda-developers.com/showthread.php?t=1709424
And everything seems to be fine, I even installed CWM Recovery, but I can't load the bootloader to recovery mode or anything. I've turned off fast boot and am applying the power button + volume down key for at least a minute. Any ideas? Thanks for your help!
Try plugging your phone into your computer and adb into the bootloader using the command adb reboot bootloader. I have a hard time with the buttons but this always gets me into it.
Ive been asked by a friend of mine to fix his nexus 5 that is stuck on a Bootloop, I've opened it up to have a look at the power button and that wasn't the problem, the device has not been rooted, the Bootloader is locked, there is no emergency mode and there is no recovery. I am however able to access fastboot and when I try unlocking via fast boot it does unlock but then requires a full reboot and as I've said before this cannot happen because of the Bootloop.
Any suggestions!?!?!?!
After unlocking the bootloader, does the bootloader relock itself? If it does, the memory chip is damaged and requires a replacement motherboard.
I've had this problem when I corrupted my recovery by using FlashFire and my bootloader was locked. Though I was able to restore my device using Fastboot. I had unlocked my device and instead of flashing the stock recovery when unlocking the bootloader I had flashed the Team Win Recovery Project recovery and when I tried to boot up to TWRP recovery it would stay for a couple of second displaying that it couldn't wipe the data partition and then reboot me back into bootloader mode. I fixed that when trying out the following steps:
1= Download the latest firmware of the device found Here .
2= Boot the device to Fastboot mode (aka Bootloader mode) plug the device in and unlock the bootloader (of coarse confirm when asked by the device).
3= After seeing that the device has stopped wiping data indicated the text "wiping..." in the very bottom of the specifications in the Fastboot Bootloader REBOOT THE DEVICE IN FASTBOOT BOOTLOADER MODE by navigating using Volume buttons to scroll down and highlight the option "Reboot Bootloader" and then pressing the Power button.
4= Using the provided scripts for Windows , Mac and Linux flash the device with the firmware.
VERY IMPORTANT: WHEN YOU SEE THAT IT IS FLASHING "userdata" and after that "cache" HOLD DOWN THE VOLUME DOWN BUTTON THIS WILL FORCE THE DEVICE INTO FASTBOOT BOOTLOADER MODE.
5= When you see that the device is in the Fastboot Bootloader mode scroll down (again using volume buttons) and highlight "Recovery Mode" then boot into Recovery and it should automatically start wiping the ("userdata" partition) Data once more that the bootloader said when it displayed the "wiping..." message after being unlocked.
If not wipe data factory reset the device manually by using the recovery and reboot to the system.
Optional: 6= IF the device has successfully booted up power it back down and lock the bootloader again using the fastboot tool additionally before locking the bootloader you can reset the warranty tamper flags.
This tutorial explains in detail how to flash a firmware to the Nexus 5 and shows how to restore the tamper flags.
I hope that I helped in some way.
audit13 said:
After unlocking the bootloader, does the bootloader relock itself? If it does, the memory chip is damaged and requires a replacement motherboard.
Click to expand...
Click to collapse
Yes after unlocking Bootloader and restarting the device into the Bootloader it relocks and I'm back at square one
The motherboard needs to be changed. I recommend looking for a used Nexus 5 with a smashed screen and a working motherboard as this may easier than trying to find a new motherboard.
jivvak said:
I've had this problem when I corrupted my recovery by using FlashFire and my bootloader was locked. Though I was able to restore my device using Fastboot. I had unlocked my device and instead of flashing the stock recovery when unlocking the bootloader I had flashed the Team Win Recovery Project recovery and when I tried to boot up to TWRP recovery it would stay for a couple of second displaying that it couldn't wipe the data partition and then reboot me back into bootloader mode. I fixed that when trying out the following steps:
1= Download the latest firmware of the device found Here .
2= Boot the device to Fastboot mode (aka Bootloader mode) plug the device in and unlock the bootloader (of coarse confirm when asked by the device).
3= After seeing that the device has stopped wiping data indicated the text "wiping..." in the very bottom of the specifications in the Fastboot Bootloader REBOOT THE DEVICE IN FASTBOOT BOOTLOADER MODE by navigating using Volume buttons to scroll down and highlight the option "Reboot Bootloader" and then pressing the Power button.
4= Using the provided scripts for Windows , Mac and Linux flash the device with the firmware.
VERY IMPORTANT: WHEN YOU SEE THAT IT IS FLASHING "userdata" and after that "cache" HOLD DOWN THE VOLUME DOWN BUTTON THIS WILL FORCE THE DEVICE INTO FASTBOOT BOOTLOADER MODE.
5= When you see that the device is in the Fastboot Bootloader mode scroll down (again using volume buttons) and highlight "Recovery Mode" then boot into Recovery and it should automatically start wiping the ("userdata" partition) Data once more that the bootloader said when it displayed the "wiping..." message after being unlocked.
If not wipe data factory reset the device manually by using the recovery and reboot to the system.
Optional: 6= IF the device has successfully booted up power it back down and lock the bootloader again using the fastboot tool additionally before locking the bootloader you can reset the warranty tamper flags.
This tutorial explains in detail how to flash a firmware to the Nexus 5 and shows how to restore the tamper flags.
I hope that I helped in some way.
Click to expand...
Click to collapse
Thanks for the suggestion but I've tried this already and it doesn't work because when I unlock the bootloader and reboot into the Bootloader it locks itself again making impossible to flash the system image
Got this phone today, can't get it to boot into fastboot or recovery - volup+power, volup+home+power, volup+voldown+power nothing seems to work and the phone just boots normally.
Also can't find which android drivers to use, or a reliable source of the apk to flash it.
Any suggestions?
Can get into fastboot via the command line, I guess I had the right drivers already. But can't unlock the bootloader because the volume up to unlock doesn't work, it doesn't recognise the button press.
Kingoroot won't work, likely because the bootloader is locked but not certain on that.
Try it maby
Try to enable the hidden developer setting and enabling ome unlock And then flash a recovery or a rotting file via Odin 3 sorry for bad spelling im 12 + I think that will unlock the bootloader and you can try kingroot , kingoroot and super one click
I have the version with 6.0 firmware, which doesnt unlock bootloader since the vol up does nothing on fastboot. Any solutions were found? Gratitude
I just rooted the oneplus nord with magisk and then locked the bootloder and im stuck with the prompt that my device is corrupted please help me.
also i wiped internal storage and tried to unlock bootloder but it didnt worked
someone please help
Try to access the recovery by pressing volume up and power button when starting! Then choose english and choose to wipe everything! This could work if you did not flash twrp
If you have locked bootloader and unlocking from fastboot doesn't work there is no way to recover your device without and EDL flash. Please contact OnePlus Support for further information
You can find the EDL tool here https://forum.xda-developers.com/oneplus-nord/how-to/opnord-unbrick-tool-to-restore-device-t4148415. Use it to unbrick your device
Hi there,
I'm facing a huge problem and I can not find the solution Googling and reading in randon forums.
Basically after unlocking the bootloader I wanted to relocked it again to avoid fingerprints issues, so that's the problem. I did something wrong and everytime I press Power button it appears a message saying
"The current image(boot/recovery) have been destroyed and cannot boot..."
The thing is that I can not even access to fastboot pressing Power button + Vol-, just pressing Power button + Vol+ and it access to EDL, but my question is related to EDL thing.
System destroyed message is because bootloader is locked and some partition was changed.
Just flash the stock rom again.
VD171 said:
System destroyed message is because bootloader is locked and some partition was changed.
Just flash the stock rom aga
Click to expand...
Click to collapse
Basically after unlocking the bootloader I wanted to relocked it now is brickrd
how can i get cridit msm tool to flashing ?
Just flash the stock rom again using the recovery or fastboot.