Database Info

[ROM][UNOFFICIAL] LineageOS 14.1 for Galaxy S4(GT-I9515)

// Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
// Info
It's unnoficial LineageOS14.1 for Galaxy S4 Value Edition (GT-I9515).
I strongly recommend to perform a backup of your current rom before installation.
// Install
Recommend: Rooted device with custom recovery like (TWRP 3.X.X)
Installation process from stock rom
Build from xx.xx. and Gapps from xx.xx. to the external SD
Installation Procedure :
coming from stock ....
TWRP - Odin flashable (I use Odin 3.12)
01. I take the battery out now, then battery in again and off into the download mode.
02. flash TWRP with Odin (comes in AP). The hooks at Auto Reboot and F. Reset Time out.
03. disconnect USB cable after flash, battery out and in again.
04. boot into recovery -> Allow Modifications
05 Advanced Wipe: Dalvik/ART Cache, System, Data, Internal Storage, Cache (lasts a while)
06. install -> select lineage image, then add more zips and gapps, then flash
07. patching system image unconditionally runs through with progress bar
08 Open Gapps are flashed, progress bar runs through
09. when done, tap reboot system, Swipe to install TWRP app (or not, if you don't need it)
10th reboot
11. Lot 14.1 boots. (quite a while ^^)
12. type through the facility
13. ready
- make a full Backup from your device
- Full wipe device (system, data, cache, dalvik)
- Install your Build
- Install Gapps (ARM Pico or Nano)
- Wipe Cache and Art/Dalvik
- Reboot
- Wait for 1st boot
- Enjoy
install magisk from here
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
LineageOS Extras
- addonsu-14.1-arm-signed.zip
- addonsu-remove-14.1-arm-signed.zip
*for those who have problems with the automatic update
*automatic update for Galaxy S4 Jfvelte (GT-I9515)
// Partners & Friends for German
https://android-freaks.de/forum/thread/47-rom-unofficial-samsung-galaxy-s4-gt-i9515-lineageos-14-1/
// OTA
https://www.los-legacy.de/14.1/jfvelte
update: monthly
// TWRP 3.1.1.0/Baseband-Bootloader
https://www.androidfilehost.com/?w=files&flid=143398
// TWRP 3.2.3.0/Baseband-Bootloader
[RECOVERY][OFFICIAL] TWRP 3.2.3-0 [jfvelte]
// Thanks / Credits
Code:
* CM team, Omni team
* XDA developers
* Everyone who has contributed to CM on S4
* syphyr and NucWin for their previous work
* Many thanks to invisiblek
//Info Exodusnick is currently taking over Benlue work
Code:
[B][U]!!!since some users have already asked me about new features!!![/U][/B]
Since it is a pure Lineageos version.
and not as optimized as e.g. side build.
All I do is keep your phone up to date.
and if errors occur, they are fixed after each update
[B][U]I hope you understand that I don't make any changes to the version
[/U][/B]
// Donate Us
PayPal.Me
// Source Code
Framework: LineageOS
Kernel: jfvelte-dev
XDA:DevDB Information
[ROM][UNOFFICIAL] LineageOS 14.1 for Galaxy S4 (GT-I9515), ROM for the Samsung Galaxy S4
Contributors
BenLue, Exodusnick
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-09-19
Created 2017-01-08
Last Updated 2020-07-25

Reserved

Reserved

thanks <3

Great work, but no sim detected..

Thank you :good:
Thank you @BenLue for keeping device updated (alive).
God bless you.

is possible Dirty Unicorns 11? is the best rom

gasc said:
is possible Dirty Unicorns 11? is the best rom
Click to expand...
Click to collapse
Please contact Dirty Unicorns 11 Dev´s
Greetings
Ben

All works or there are some bugs?
Thanks!!!

mickdroid94 said:
All works or there are some bugs?
Thanks!!!
Click to expand...
Click to collapse
Yes, it have not sim detected error.

hknsvm said:
Great work, but no sim detected..
Click to expand...
Click to collapse
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben

BenLue said:
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben
Click to expand...
Click to collapse
Thank you
I tried but it have same problem.
No problem when installing another rom

BenLue said:
Uhm sorry for this Issue, i cant reproduced the No Sim Detected Error!
Please make sure:
Rom Clean install
your Sim Card Slot is clean
Greetings
Ben
Click to expand...
Click to collapse
:crying: BUG >
No Sim Detected > baseband unknown

I will give it a try and report if there's a SIM bug or not.
E: Didn't work, now I'm going to try the ROM by sombree

droidfuture said:
:crying: BUG >
No Sim Detected > baseband unknown
Click to expand...
Click to collapse
Its possible to test an different Baseband?
Greetings

unimetal said:
I will give it a try and report if there's a SIM bug or not.
E: Didn't work, now I'm going to try the ROM by sombree
Click to expand...
Click to collapse
I use sombree rom, The rom good work but have some bugs. Sometimes doesn't work camera..

BenLue said:
Its possible to test an different Baseband?
Greetings
Click to expand...
Click to collapse
yes, tested >
ANJ1 4.4.2
BOJ1 5.0.1
BPI1 5.0.1
ANC1 4.4.2
All Wipes.
My model has L without end
GT-i9515L Is that it?

droidfuture said:
yes, tested >
ANJ1 4.4.2
BOJ1 5.0.1
BPI1 5.0.1
ANC1 4.4.2
All Wipes.
My model has L without end
GT-i9515L Is that it?
Click to expand...
Click to collapse
droidfuture, -> GT-I9515L <- is not GT-I9515 (Jfvelte) Value Edition

This thread is in the wrong xda section. It should be in i9515 instead of i9505.

lineage-14.1-20170109-UNOFFICIAL-jfvelte.zip

[Rom] Official Lineage OS 14.1 for Falcon

Lin·e·age
/ˈlinēij/
noun
1.lineal descent from an ancestor; ancestry or pedigree.
2.a sequence of species each of which is considered to have evolved from its predecessor.​
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Download & Install
LINKs:
Rom
Changelog
OpenGapps choose ARM>7.1>micro/nano/pico (micro might still be too big... unless you use the custom install options that allows you not to install everything from the package)
REMEMBER:
ONLY use TWRP 3.0.2-1 or up​HOW TO INSTALL
Requirements: Unlocked Bootloader, a Nougat compatible Custom Recovery and the Downloaded Zips.
1.Place the rom and other like Gapps on the internal Storage or on a USB OTG
2.Reboot to recovery using the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
3.Do Wipes (Data, Cache, Dalvik and System partitions) if you are in a different ROM.
4.Select the Zips
5.Swipe to install (if using TWRP)
6.Reboot and wait 2-3 min​
Flash This to have system root access
READ POST 2 BEFORE FLASHING
XDA:DevDB Information
[Rom] Lineage OS 14.1 for Falcon, ROM for the Moto G
Contributors
Allstargaurav
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
ROM Firmware Required: CyanogenMod13
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2017-01-21
Last Updated 2017-01-26

HOW TO DIRTY UPDATE
1.Download the rom zip
2.Reboot to recovery using the power menu or the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
3.Do Wipes (Cache, Dalvik)
4.Flash the Zip(No Need To flash Gapps)
5.Reboot and wait 2-3 min
HOW TO CLEAN UPDATE :
1.Download the rom zip and make sure you have gapps zip on your device
3.Reboot to recovery using the power menu or the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
5.Format /system, /cache and /dalvik-cache (advance format in wipe menu of TWRP); do NOT Wipe DATA
6.Install zip
7.Reboot and wait 2-3 min
EXPERIMENTAL:-This build will allow you to ‘upgrade’ from CM to the signed LineageOS weekly
How To install EXPERIMENTAL
1.Download experimental and nightly zip
2.Boot into Recovery
3..Install experimental migration build on top of cm-14.1 build
4.Reboot
5.Install LineageOS weekly build
6.Reboot
7.Re-setup your application permissions

You might want to state that this is not the official version. There might be a bit of confusion otherwise because official builds will be available this weekend.

ahmad.o said:
You might want to state that this is not the official version. There might be a bit of confusion otherwise because official builds will be available this weekend.
Click to expand...
Click to collapse
Is it Better Now

It's better to put unofficial tag in title too. Not just as announcement. People might not notice it.
Edit: Just saw your edit.

Please ask a moderator to post it on the android development, doesn't belong here.

Aayushya said:
Please ask a moderator to post it on the android development, doesn't belong here.
Click to expand...
Click to collapse
I will make this Offical Lineage thread as soon as weekly starts rolling

Lineage based on aosp?

Any screenshoots?

Pierre2324 said:
Lineage based on aosp?
Click to expand...
Click to collapse
its more cm based

Great?

Testing. So far so good.

Just installed on xt1032 and looks amazing! Does this get OTA? Or do I have to flash new roms?

What about ram usage Nougat seems bad always low ram on every rom

Pierre2324 said:
What about ram usage Nougat seems bad always low ram on every rom
Click to expand...
Click to collapse
to me is about 240 mb free, anyway nougat runs very well

Wifi sometimes turn down. This is unique bug I found

Working without issues here. :good::good::good:

fix for bluetooth pairing?

Reserved...

Is the op actually a contributor or just putting the thread up?

[ROM][6.0_r79][UNOFFICIAL] LineageOS 13 for Vernee Mars

This is LineageOS 13 for Vernee Mars.
You need to be on the stock MM firmware with TWRP in order to flash this rom!
I am not to be held responsible for bricked devices,you are flashing this on your own accord. BE WARNED!
Installaion:
1. Downlaod the rom and gapps
2. Flash the MM TWRP
3. Wipe the System, Data, Cache and Dalvik
4. Flash the rom and gapps
Not working:
-HDR
Working:
-everything else?
Download
Device tree: HERE
Kernel source: HERE
Vendor tree: HERE
XDA:DevDB Information
LineageOS for Vernee Mars, ROM for all devices (see above for details)
Contributors
The Marionette, Alberto96
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2017-05-12
Last Updated 2017-05-12

Changelog:
-12.5.2017.
-initial release
-13.5.2017.
- include Snap Camera(does the work much better)
- make sure the boot animation is smoother(TIP you can simply download the LineageOS boot animation from another source,only the one in the build lags for some reason)

please post the flash procedure

bluetooh not work properly, i cant connect to my parrot

vaorr said:
bluetooh not work properly, i cant connect to my parrot
Click to expand...
Click to collapse
Hmm,that's odd. Bluetooth works fine for me,I successfully connected to another phone and sent files without a single error.

Thanks. This rom is great

[DEV] [GUIDE] LineageOS for Oppo F1 (f1f)

Android 8.0 Oreo - Now in Development
Lineage for Oppo F1 (f1f)
LineageOS is a free and open-source operating system for smartphones and tablet computers, based on the Android mobile platform. It is the successor to the highly popular custom ROM CyanogenMod, from which it was forked in December 2016 when Cyanogen Inc. announced it was discontinuing development and shut down the infrastructure behind the project. Since Cyanogen Inc. retained the rights to the Cyanogen name, the project rebranded its fork as LineageOS.
Instructions
For Installing
1. Unlock root.
2. Download the latest TWRP, build, and GApps.
3. Install/unlock TWRP.
4. Reboot to TWRP recovery.
5. Wipe System, Data, Cache, and Dalvik.
6. Flash the build, and GApps respectively.
7. Flash patches if available.
8. Wipe cache and dalvik.
9. Reboot to system, and enjoy.
Note: If you have 'already installed' Lineage, and want to update your build, use the instructions below.
For Updating Build (Clean Flash)
1. Download the latest build and GApps.
2. Reboot to TWRP recovery.
3. Wipe System, Data, Cache, and Dalvik.
4. Flash the build, and GApps respectively.
5. Flash patches if available.
6. Wipe cache and dalvik.
7. Reboot to system, and enjoy.
For Updating Build (Dirty Flash)
1. Download the latest build.
2. Reboot to TWRP recovery.
3. Flash the build.
4. Flash patches if available.
5. Wipe cache and dalvik.
6. Reboot to system, and enjoy.
For Updating TWRP
1. Download the latest TWRP.
2. Reboot to TWRP recovery.
3. Flash the TWRP update.
4. Wipe cache and dalvik.
5. Reboot to system, and enjoy.
For Unlocking
1. Download magictricks.zip.
2. Go to stock recovery, then install/flash magictricks.zip
3. Reboot to fastboot, then connect phone to pc.
4. Setup adb shell in Windows.
5. Lunch CMD.
6. Install adb drivers for oppo f1f.
7. Type "cd c:\adb" then enter.
8. Type "adb devices" then enter.
9. You should see your device in the list, if not, go back to step six.
10. Put TWRP flashable zip to c:\adb (rename as twrp.img).
11. Type "fastboot oem unlock" then enter.
12. Type "fastboot flash recovery twrp.img" then press enter.
13. After, disconnect phone then reboot to TWRP.
14. Flash img/zips what you want.
Downloads
TWRP: download link
OpenGApps: download link
Unlocker: download link
ADB Installer: download link
ADB Extract: download link
For the builds, see below.
Version Information
Latest Stable Version
Build: 14.1-2017XXXX-UNOFFICIAL-f1f
Android Version: 7.1.1 Nougat
Latest Beta Version
Build: 15.0-2017XXXX-UNOFFICIAL-f1f
Android Version: Android 8.0 Oreo
OpenGApps Version
Platform: ARM64
Android: 7.1 (stable) or 8.0 (beta)
Variant: Stock (recommended)
Android 8.0 Oreo (In Development)
Downloads
Lineage 15 based on Android Oreo Source Code: Link
Notes for Android Oreo Development
Lineage 15 based on Android Oreo Source Code is the one we will need to port.
Android 7.1 Nougat (Old)
Downloads
Build: download link
Patch (Auto Rotation and Navigation Bar): download link
Patch (Kernel): download link
Add-ons
Temporary Camera: download link
Temporary Torch: download link
Known Bugs
The bugs listed here are bugs from the latest nougat build.
1. Camera crashes.
2. Torch toggle don't work.
3. Battery non-accuracy.
4. Hotspot Issue.
FAQ
Q1: What's the difference between updating build "Cleaand "Dirty Flash"?
Clean flash - removes all your files then install the update. Dirty flash - updates your build without removing your files.
Q2: When will you release​ the next stable build?
See "Version Information" in this thread.
Q3: Can I try the latest beta version?
Yes, if granted by developers of this thread. No, if not.
Q4: Did you already fix the bugs present in the latest stable build?
See "Known Bugs" in this thread.
Q5: What's better for updating build? Clean flash or Dirty flash?
I recommend dirty flash. Only use clean flash when you can't update build properly.
Q6: What's the difference between this thread and other threads.
This thread is for "DEVELOPMENT and FULL GUIDE for 'UNLOCKING, RECOVERIES, KERNELS, ROMS, and OPENGAPPS' for Oppo F1 (f1f)".
Credits, Sources
Developers and contributors:
@kdd998
Android 7.1 Build
@MiniBlu
Android 7.1 Kernel Patch
@khannz7
Android 7.1 Auto Rotation and Navigation Bar Patch
@Earthy
Instructions/Guides
Android 7.1 Add-ons
@ TWRP
TWRP
@ OpenGApps
OpenGApps
@ Lineage Github Repo
LineageOS 14.1
LineageOS 15.0
@ AOSP
Android Nougat Source Code
Android Oreo Source Code
and the community.
For those who want to help building builds for this rom, and for those have knowledge about building builds, just reply to this thread. We will cooperate and share knowledge with each other, so we can build a build faster, better, and more stable. Just teamwork.
Notes
Bug report:
For bug report, just reply to this thread.
Keep up-to-date here, this first thread post change info over from time to time. This thread is last updated: 00:00 PM, Mon-Sun, Jan-Dec 00 2017 (GMT+8).

Reserved 1 out of 9.

Reserved 2 out of 9.

Reserved 3 out of 9.

Reserved 4 out of 9.

Reserved 5 out of 9.

Reserved 6 out of 9.

Reserved 7 out of 9.

Reserved 8 out of 9.

Reserved 9 out of 9.

https://github.com/LineageOS/android_device_oppo_f1f
You can't do anything until there's a cm15 branch anyway.
You can try and port to our device from another device if you want.
There's still actually no new links in this thread. Its all other peoples work. U say u have a beta but havent posted anything. Try and help the other dev fix the sound in the nougat kernel. Instead of just posting other peoples work here.

Jamie_oppo said:
https://github.com/LineageOS/android_device_oppo_f1f
You can't do anything until there's a cm15 branch anyway.
You can try and port to our device from another device if you want.
There's still actually no new links in this thread. Its all other peoples work. U say u have a beta but havent posted anything. Try and help the other dev fix the sound in the nougat kernel. Instead of just posting other peoples work here.
Click to expand...
Click to collapse
Here's the Lineage 15 Source Code.
https://github.com/LineageOS/android_vendor_lineage

Earthy said:
Here's the Lineage 15 Source Code.
https://github.com/LineageOS/android_vendor_lineage
Click to expand...
Click to collapse
Yeah but you still need a los15.0 branch for the f1f device tree. Which isn't available and won't be for a long time

Jamie_oppo said:
https://github.com/LineageOS/android_device_oppo_f1f
You can't do anything until there's a cm15 branch anyway.
You can try and port to our device from another device if you want.
There's still actually no new links in this thread. Its all other peoples work. U say u have a beta but havent posted anything. Try and help the other dev fix the sound in the nougat kernel. Instead of just posting other peoples work here.
Click to expand...
Click to collapse
Jamie_oppo said:
Yeah but you still need a los15.0 branch for the f1f device tree. Which isn't available and won't be for a long time
Click to expand...
Click to collapse
We don't need to wait if we will build our own branch for the f1f device tree. And actually, we are the one should make it because we are the only who develops ROM for this. And also common sense to know that "the one who develop the ROMs should make everything needed here like kernel, branch that you're saying, etc.".

?
Earthy said:
We don't need to wait if we will build our own branch for the f1f device tree. And actually, we are the one should make it because we are the only who develops ROM for this. And also common sense to know that "the one who develop the ROMs should make everything needed here like kernel, branch that you're saying, etc.".
Click to expand...
Click to collapse
Well I have my doubt's. Prove me wrong. I would have no idea how to do this.
Also I think a group collaboration would be better. One person would just be too much work.
Good luck anyway

@MiniBlu, there's your credit. :angel:

@Earthy it is obvious none of this is your work. I personally don't see a camera fix as reason enough for you to repackage someone else's work and release it yourself. Under XDA rule:
12-3. Re-releasing other's works as your own is forbidden. The code that you release into the wild must have something beyond minor aesthetic changes that makes it better than the last. As this can be subjective, kang reports will be reviewed on a case by case basis. If you feel that your code has been kanged, please contact the Dev Relations team (listed below) if you cannot solve the issue amicably via PM. Please understand that you will be asked to provide evidence to substantiate your claim;
Click to expand...
Click to collapse
Thread closed

[07/19/2020][9.X] Android Open Source Project Pie Huawei P8 Lite 2017

About the Android Open Source Project
Android is an open source software stack for mobile devices and a corresponding open source project led by Google. This site and the Android Open Source Project (AOSP) repository offer the information and source code needed to create custom variants of the Android stack, port devices and accessories to the Android platform, and ensure devices meet the compatibility requirements that keep the Android ecosystem a healthy and stable environment for millions of users.
BUGS:
TELL ME.
sdcard that I will fix in next build.
GAPPS:
Click here to download this gapps.
Downloads:
09/05/2020
aosp-9-20200508-prague-haky86.zip
Fix gapps issue.
Fix hwc thanks to Flex1911.
I forget to include NFC fix, just flash Treble's module.
19/19/2020
aosp-9-20200716-hi6250-haky86.zip
Restart works.
Fix Google Play errors:
Go to Settings.
Open Apps.
Search for Google Play Store and Google Play Services.
Give the permissions especially to storages to get Play Store worked correctley.
XDA:DevDB Information
Android Open Source Project Pie for HI6250 Emui 8.x based, ROM for the Honor 8 Lite
Contributors
haky 86, flex1911
Source Code: http://github.com/hak86
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-11-18
Beta Release Date: 2018-11-18
Created 2018-11-18
Last Updated 2019-11-14

** Note **
reserved:
topic will be reopened once download is uploaded
Edit: rom uploaded

Any experience with this?

dtrail1 said:
Any experience with this?
Click to expand...
Click to collapse
same as other roms, I simply remove kirin970 stuff.

I'm assuming Gapps are not included?

verntechguy said:
I'm assuming Gapps are not included?
Click to expand...
Click to collapse
Nope isn't included. I will use this thread as unique place for all my Pie ROMs.

haky 86 said:
Nope isn't included. I will use this thread as unique place for all my Pie ROMs.
Click to expand...
Click to collapse
Thanks for the info. So opengapps should work right? How about Magisk? Standard version should work?

verntechguy said:
Thanks for the info. So opengapps should work right? How about Magisk? Standard version should work?
Click to expand...
Click to collapse
for gapps I recommend pico, since it is "demo" build for nfc you have to flash magisk module, for magisk use 17.1 and up also don't forget to install the manager application.

haky 86 said:
for gapps I recommend pico, since it is "demo" build for nfc you have to flash magisk module, for magisk use 17.1 and up also don't forget to install the manager application.
Click to expand...
Click to collapse
My variant doesn't have nfc so I don't have to worry about that. Will try this out once I'm free. Thanks for your work!

** Breaking News **
AOSP Extended is HERE
08/11/2018:
AospExtended-v6.0-hi6250-20181108-1232-UNOFFICIAL.zip
Bugs: media works just via VLC application or similar, I will fix in next build.
Don't forget to do the following things:
1-)Reboot in TWRP and mount system, vendor and splash2 partitions.
2-)Run the following command from terminal: /sbin/sh /system/bin/releasetools.kirin970.sh
3-)Flash eRecovery and do factory reset to boot the rom properly. P.S: if boot with a fully worked twrp you don't need to flash stock eRecovery.
No screenshots? I forget to save them but see the one in the attached files
Telegram: https://t.me/HakyGSI

** Note **
AOSP has been updated
aosp-pie-9.0.0_r16-hi6250-090112018.tar.gz
Android 9.0.0 R16.
Hotspot fixed.
NFC fixed properly.
Don't forget run releasetools.kirin970.sh script via twrp to boot the whole rom.

cookremier said:
Dates doesn´t match to the files in the main post.
Look at this:
AOSP Extended:
18/11/2018:
AospExtended-v6.0-hi6250-20181108-1232-UNOFFICIAL.zip
Do you live in the future with a Flux Compensator ???
Click to expand...
Click to collapse
yes, I'm coming from the future .
it just a typo's error

Any other recommendation before flashing your Image? Tried it by coming from EMUI 8 but got sparse error after flashing system.img in fastboot.

pete80pro said:
By following your Tutorial I'm gettin error message on flashing System.img with fastboot.
I have to be on EMUI 8 before, any other needed things?
Click to expand...
Click to collapse
Flash phh's aosp 9 without wiping emui 8 system partition then try mine. in case not working wait next build then
I manage to boot LineageOS 16.0, I will fix error 7 here too and upload first beta in separate topic.

Good for daily use ? P10 Lite

cxyqqz said:
Good for daily use ? P10 Lite
Click to expand...
Click to collapse
Yes but I have to fix fastboot error first.
Anyways LineageOS 16.0 cancelled, sometime boot and some time doesn't boot. I'm start getting bored of from Emui 8.x and back to emui 5.x developments that are better in certain sense.

P20 Lite ane-lx support?

A_S_A113 said:
P20 Lite ane-lx support?
Click to expand...
Click to collapse
yes it is, the next image of AOSP 9 with fastboot fix will come out in next hours.

haky 86 said:
AOSP Extended is HERE
08/11/2018:
AospExtended-v6.0-hi6250-20181108-1232-UNOFFICIAL.zip
Bugs: media works just via VLC application or similar, I will fix in next build.
Don't forget to do the following things:
1-)Reboot in TWRP and mount system, vendor and splash2 partitions.
2-)Run the following command from terminal: /sbin/sh /system/bin/releasetools.kirin970.sh
3-)Flash eRecovery and do factory reset to boot the rom properly. P.S: if boot with a fully worked twrp you don't need to flash stock eRecovery.
No screenshots? I forget to save them but see the one in the attached files
Telegram: https://t.me/HakyGSI
Click to expand...
Click to collapse
What do you mean by flashing erecovery, you mean stock recovery right? (recovery ramdisk)

steven360 said:
What do you mean by flashing erecovery, you mean stock recovery right? (recovery ramdisk)
Click to expand...
Click to collapse
yes stock recovery, it is needed just to wipe data & cache. the releasetools.kirin970.sh can be flashed by twrp post rom installation by /sbin/sh in shell.