Hi,
I set my router to use 40mhz of wlan channel width in the 2,4ghz band. (Fritzbox 7390)
After changing that setting from 20mhz to 40mhz in the router, the router shows, that the asus tablet uses 40mhz now.
But the router shows also, that the Oneplus One still uses only 20mhz channel width.
How can I force the Oneplus one to use 40Mhz?
*push*
Nobody knows how to enable 40mhz channel width on the 1+1?
It really bothers me that on 2,4Ghz I can only get 65Mbit/s Link speed, while on the 5Ghz band I get 150mBit/s link speed
Yep, bothers me too. Is there no fix???
I have the same issue. Looking forward to find a fix for that.
Maybe the phone doesn't support 40 MHz on 2.4 GHz networks. Have you tried 5 GHz? I'm getting over 400 Mbps link speed on my network
I would like to know is there any settings file for wifi module to set this option, too?
PS. For mediatek chip there is config file located at /system/etc/wifi/wpa_supplicant.conf
Does anybody know extra key which controls using of 40 MHz width?
For qualcomm chip there is valuable info here: https://forum.xda-developers.com/showpost.php?p=70388418&postcount=20
Polarfuchs said:
Hi,
I set my router to use 40mhz of wlan channel width in the 2,4ghz band. (Fritzbox 7390)
After changing that setting from 20mhz to 40mhz in the router, the router shows, that the asus tablet uses 40mhz now.
But the router shows also, that the Oneplus One still uses only 20mhz channel width.
How can I force the Oneplus one to use 40Mhz?
Click to expand...
Click to collapse
i have fritz os 6.52 and fritz 7490 BUT.... i can't find the option to set 40mhz width! can you please sent me a screenshot?
You have to disable WLan-Coexistance.
Info article: https://en.avm.de/service/fritzbox/...ality-increased-by-reduced-channel-bandwidth/
As far as I know, you should change the configuration of your router... I solved the same problem with the Moto G5+ (getting only 72mbps connection) by changing the router's configuration from "20/40 auto" to "only 40", so I have now 150mbps link speed in 2.4Ghz
Maybe it has already been mentioned, but only if not, here's a little observation that I did with my V10 today.
Provider with 200MBit in the downstream, WLAN with 5GHz at 390Mbit to the router.
I tested the throughput with Speedtest from Ookla.
Following observations:
- Wireless 5GHz, Bluetooth headset and Bluetooth fitness watch connected -> Throughput in the Wi-Fi almost zero
- WLAN 5GHz, only Bluetooth Fitness watch connected -> throughput in the WLAN about maximum of 50MBit and fluctuating
- WLAN 5GHz with switched off Bluetooth -> Throughput constant at 200Mbit / s (maximum of my Internet line).
Of course I have tried this several times. Sure, bluetooth runs somewhere on 2.4GHz, but I have never experienced it so extreme. And I didn't expect it on 5GHz.
At 2.4 GHz it looks the same.
Is that somehow already known or someone has found a workaround, if that would be the case in general. Or is the antenna design really that bad?
i am using a router which broadcast both 2.4ghz and 5ghz band using single SSID. how do i force my phone to only allow to connect to the 5Ghz wifi network. i cannot turn off the 2.4ghz band as there are other devices in my house that only support 2.4ghz or do i want to split the bands into 2 SSID.
Thank you.
i was able to split my router to 2 different SSID for both bands
In the past there used to be an option in advanced wifi settings that made the 5GHz "preferred" but Google took it out for some reason.
The disabling of the 2.4 GHz or having 2 separate SSIDs might be the only way right now (not sure for a rooted phone tho)
Sent from nowhere over the air...
Yes not sure why did Google remove that option. Any hidden secret code i.e. *#00*# etc that allowed us to make changes to network setting.
Some routers have band steering which will force devices to 5ghz if supported while keeping 2.4ghz for devices that can't.
Sent from my SM-N986U using Tapatalk
I turned off Auto Connect on my 2.4ghz, so it stays on 5ghz all the time.
Eagle 3 said:
I turned off Auto Connect on my 2.4ghz, so it stays on 5ghz all the time.
Click to expand...
Click to collapse
Mine only 1 ssid for both band. Seem like there is no solution and i had to split the bands into 2 ssid.
angka8 said:
Mine only 1 ssid for both band. Seem like there is no solution and i had to split the bands into 2 ssid.
Click to expand...
Click to collapse
I only have 1 ssid. Like I said, I turned off Auto Connect for 2.4ghz so it always stays on 5ghz.
Eagle 3 said:
I only have 1 ssid. Like I said, I turned off Auto Connect for 2.4ghz so it always stays on 5ghz.
Click to expand...
Click to collapse
thanks, but for me both the bands are broadcast into one SSID. which means i can only find one wifi connection and the wireless router will change the band connection based on the signal strength when i am moving around the house. it will change the connection to 2.4ghz when i am in some place where the 5ghz connection is weak. why i wanted to stay with 5ghz when the connection is weak because it give a much higher download/upload speed compare to the 2.4ghz connection which somehow got much weaker internet speed to the extent of unusable.
angka8 said:
thanks, but for me both the bands are broadcast into one SSID. which means i can only find one wifi connection and the wireless router will change the band connection based on the signal strength when i am moving around the house. it will change the connection to 2.4ghz when i am in some place where the 5ghz connection is weak. why i wanted to stay with 5ghz when the connection is weak because it give a much higher download/upload speed compare to the 2.4ghz connection which somehow got much weaker internet speed to the extent of unusable.
Click to expand...
Click to collapse
Buy a new router where you can separate them and then disable or turn off the 5ghz connection
Looks like this is quite an issue for N2Us. I have a 4 year old iphone and it stays connected to 5GHz in the same place and N2U reverts to 2.4. I have band steering and have been really well on all other devices. Issue lies only with N2U.
Snowleopard1900 said:
Buy a new router where you can separate them and then disable or turn off the 5ghz connection
Click to expand...
Click to collapse
Mine can separate them but since it is only affecting my phone, I hope the change can be on the phone instead. By separating them, I will need to configure all those devices that can only connect to 2.4ghz. e.g. ring peephole
Did you solve issue? Same problem here :/
Eagle 3 said:
I only have 1 ssid. Like I said, I turned off Auto Connect for 2.4ghz so it always stays on 5ghz.
Click to expand...
Click to collapse
Errr...you actually DON'T have one SSID but 2. The band is appended on the name and they are actually 2 different WiFi networks with different names so you could turn off auto-connect on the 2.4GHz one
I use the Wireless Mac Filter on my router to block 2.4Ghz Band for my phone mac address, so the phone can only connect to 5Ghz
If you are using a Samsung phone in the advanced settings for wifi, turn off use randomised MAC address and use the phones actual MAC. This fix has been tested on Netgear routers and works, phone will join the faster 5ghz and still be able to switch to 2.4 if you are at a distance from the router
SenatorDC said:
If you are using a Samsung phone in the advanced settings for wifi, turn off use randomised MAC address and use the phones actual MAC. This fix has been tested on Netgear routers and works, phone will join the faster 5ghz and still be able to switch to 2.4 if you are at a distance from the router
Click to expand...
Click to collapse
Thanks, this worked with Pixel 4a on ruckus WiFi as well!
angka8 said:
i am using a router which broadcast both 2.4ghz and 5ghz band using single SSID. how do i force my phone to only allow to connect to the 5Ghz wifi network. i cannot turn off the 2.4ghz band as there are other devices in my house that only support 2.4ghz or do i want to split the bands into 2 SSID.
Thank you.
Click to expand...
Click to collapse
This is what i did .
(It might give you an very easy option /idea .)
My current setup is a Nokia fibre router that has 2.4 ghz and 5 ghz bands
I bought a reasonable priced wifi mesh 'TP DECO M4 "then
connected it to my fibre router ( ethernet cable )
The TP wifi mesh comes with an Android app fo configure it (settings )
All i did was swicth off the 2.4 ghz band in app, for my TP decom 4 model .
So if i wand to use only 5ghz i connect to my TP DecoM4 ( which is connected to my Nokia fibre router)
My othe devices( that only use 2.4 ghz bands ) i connect dirrectly to my Nokia fibre router, that has 2.4ghz band active ...and also the 5ghz ,
So fo me its a matter of to switch 2.4 ghz on and off in the Android TPlink app .
Hope this give you an very straightforward option ?
good luck
see screenshots below
Hi...
I don't if you already solved you problem but, probably, if you have router which broadcast both band with the same SSID you have option, in router settings, called SMART CONNECT set to the "ON"...
I found a solution that worked for me, i am using a xiaomi router and a s21
Samsung S21 Ultra 5G not connecting to 5Ghz wifi channel
Hi folks . I have a Samsung s21 ultra 5g. I can connect to the 2.4ghz WiFi but more than often I can't seem to connect to the 5ghz wifi channels .I'll have my laptop right infront of me onnected to the 5ghz wifi channel , yet my phone won't be able to the same. My router is netgear nighthawk...
eu.community.samsung.com
"in the settings of your phone / Connections / Wifi / settings of your network put:
IP-DHCP Settings
Phone MAC-MAC address type"
Hi everybody how can i fix cannot find 5ghz WiFi signal on my phone KB2000(CN unit) with O2OS(India firmware)?
change your 5ghz router channel, use higher one (153 or so)
Dear All
I own an android phone running Android 8.1. I looked at everything inside WiFi Setting but I can't find an option to selection only 2.4GHz or 5GHz frequency. Compare to my 10 years old phone runing android 4.4.2 which has an option for 2.4GHz or 5GHz. Is there any App that help to get this option enable or any workaround? My workplace use Band Steering which 2.4GHz and 5GHz use that same SSID and my phone always connect to 2.4GHz. I have to turn wifi on/off a few time to connect to 5GHz.
What radio bandwidth actually can get used depends on both the phone's hardware and the Wi--Fi network provider.
You can run this app to see what is possible:
https://apkpure.com/wifi-band/com.igorlazunna.android.wifiband
I'm no doubt Both of my phone and WiFi AP support 5GHz(Dual Band).
AFAIK Android OS has some algorithm for choosing the best Wi-Fi connection. I don't know what it is. But I think it tends to prioritize faster Wi-Fi networks over stronger ones.
5GHz is always faster than 2.4GHz regardless of signal strength for my experience so I just want my phone connect to 5GHz unconditionally. With my old phone, when I set to 5GHz only, it won't connect to any 2.4GHz event if 5GHz is not available. That's my goal.