hi, I hope I'm in the right place to get help with my issue. my Ace is in a reboot loop that i can't seem to get it out of. i have tried force rebooting and lt will not enter into recovery mode so that each time i would hit recovery mode the screen goes blank for a few seconds then the moto logo (M powered by Android) screen comes on with vibration for six seconds then again to blank repeating this loop until i again hold power and volume down buttons. I do have a lot of apps installed but this phone has a whole lot of memory that came with it. I am hoping this forum may have some ideas to help me rectify this issue. thank you.
While connected to a pc, enter the fastboot - w command. This will erase the internal memory and your phone should be able to boot.
RETIEF said:
While connected to a pc, enter the fastboot - w command. This will erase the internal memory and your phone should be able to boot.
Click to expand...
Click to collapse
thank you for responding. I connected my phone to my laptop but it does not detect it. my phone has, highlighted in red, AP fastboot flash mode (secure). also, tools mode: Disabled, and OEM locked
If you can reboot to recovery, try a factory reset.
RETIEF said:
If you can reboot to recovery, try a factory reset.
Click to expand...
Click to collapse
thats the problem I"m having is getting into the recovery. I hold the volume down and the power buttons down till I can see the options recovery mode, but when I click on it by pushing on the power button, that's when it goes into the loop mode and never goes into recovery.
Use the Lenovo tool to download and flash the stock rom which includes a recovery.
RETIEF said:
RETIEF said:
56Use the Lenovo tool to download and flash the stock rom which includes a recovery.
Click to expand...
Click to collapse
Use the Lenovo tool to download and flash the stock rom which includes a recovery.
Click to expand...
Click to collapse
RETIEF said:
Use the Lenovo tool to download and flash the stock rom which includes a recovery.
Click to expand...
Click to collapse
I did what you adviced and I was instructed to enable debugging or fastboot mode in order to be able to rescue. But if I was able to do either one of those that means I wouldn't need help booting up. follow what I'm saying? because I would have to get into the settings to enable debugging or fastboot mode, somthing I can't do because my phone will not boot up.
To enable fastboot moode, hold the power button and the volume down button at the same time. This should put you in the right place. You should get red text that says you are in fastboot mode. If not, go to https://t.me/motoblankflash and ask for help.
RETIEF said:
To enable fastboot moode, hold the power button and the volume down button at the same time. This should put you in the right place. You should get red text that says you are in fastboot mode. If not, go to https://t.me/motoblankflash and ask for help.
Click to expand...
Click to collapse
listen, I want to thank you for your time and patience and quick responses. I will look into the link above. You've been very helpful and I appreciate you. God bless. Peace.
Related
Hi all,
Been given a Nexus S i9023 by my brother who has been "tampering" with it and now it seems a bit messed up.
When booting up - it gets stuck on the "Google" screen with a padlock on it... I can get into fastboot and I can flash recovery but when I attempt to load any recovery - I get that same Google screen with the padlock! I've downloaded a stock rom and even flashed system etc via fastboot but that still gets me nowhere past the damn padlock!!
I've tried to "fastboot boot recovery.img" and I still get the Google screen with the padlock but it says "Fastboot status - OK" on the bottom left.
I've searched and searched but everyone just seems to give tips on how to flash recovery. I know how to flash recovery; it just seem to be going into it though! Could the internal memory be screwed?
Thanks for any advice!
Sounds strange for sure. You try from within the OS? Enable USB debugging and adb reboot recovery.
Doubt it will work but its worth a shot
albundy2010 said:
Sounds strange for sure. You try from within the OS? Enable USB debugging and adb reboot recovery.
Doubt it will work but its worth a shot
Click to expand...
Click to collapse
The phone stops at Google with the padlock on boot! Can't even get into the OS. Going to try to unbrick it and Odin but left my ubuntu laptop at my parents and can't be bothered to go get it... couldn't get it to work booting off cd rom. Kept giving me the "SBL Injection Failure Failed to find device" error booting ubuntu on a CD!
You may have a storage issue.
I seen you tried to flash system and boot recovery with fastboot ( which should have booted) but did you try to flash them all and wipe. The command is fastboot -w update file name.
I think Odin is a windows only tool anyways by the way.
albundy2010 said:
You may have a storage issue.
I seen you tried to flash system and boot recovery with fastboot ( which should have booted) but did you try to flash them all and wipe. The command is fastboot -w update file name.
I think Odin is a windows only tool anyways by the way.
Click to expand...
Click to collapse
No idea why I said Odin - I meant the unbrickable recovery thing.
I tried Odin with a Jig last night; got it into download mode and flashed with odin. Got the same result.
fastboot -w also gives the same issue...
If I have a storage issue - is there any way I can tell?
Basically you can tell by the issues you're having. Doing all the proper stuff to flash images etc and still having a booting/working device.
As far as a actual diagnostic tool I don't know of one. But it sure sounds like a hw issue to me.
I have the following problem: since a few weeks I'm unable to enter recovery.
This is what I do:
- shut down my phone
- press the power button while holding the volume up
- than I get a screen where I can choose from 4 options using the volume controls and selecting an option with the power button
- I select 'Recovery' and press the power button
- I get the usual black screen with Google logo and padlock
- but instead of getting into my recovery, I get a black screen with a Droid lying down, the 'chest' opened and some kind of small warning triangle above it..somebody who knows what I have to do??
Thanks in advance
Pironi90 said:
I have the following problem: since a few weeks I'm unable to enter recovery.
This is what I do:
- shut down my phone
- press the power button while holding the volume up
- than I get a screen where I can choose from 4 options using the volume controls and selecting an option with the power button
- I select 'Recovery' and press the power button
- I get the usual black screen with Google logo and padlock
- but instead of getting into my recovery, I get a black screen with a Droid lying down, the 'chest' opened and some kind of small warning triangle above it..somebody who knows what I have to do??
Thanks in advance
Click to expand...
Click to collapse
Reflash your recovery using fastboot.
polobunny said:
Reflash your recovery using fastboot.
Click to expand...
Click to collapse
And where can I find how to do this? I'm a total newbie for this kind of stuff and I found some hits on google (e.g. http://forum.xda-developers.com/showthread.php?t=1757146) but I'm actually a bit scared to damage my phone or something by doind something wrong or applying some method that's actually made for another device or so.. :s
Pironi90 said:
And where can I find how to do this? I'm a total newbie for this kind of stuff and I found some hits on google (e.g. http://forum.xda-developers.com/showthread.php?t=1757146) but I'm actually a bit scared to damage my phone or something by doind something wrong or applying some method that's actually made for another device or so.. :s
Click to expand...
Click to collapse
Flash custom recovery.img part
http://wiki.cyanogenmod.org/wiki/fastboot#Flash_Custom_Recovery.img
You need ADB (and ADB drivers installed, strongly recommend PDANet Android Drivers) and fastboot executable.
Custom recovery I suggest you use Clockworkmod Recovery.
I imagine your phone is already unlocked?
polobunny said:
I imagine your phone is already unlocked?
Click to expand...
Click to collapse
I think so yes, I could access recovery before if that's what you mean by unlocked
Pironi90 said:
I think so yes, I could access recovery before if that's what you mean by unlocked
Click to expand...
Click to collapse
When u boot on the Google screen on the bottom centre does it have a padlock? If so then it is unlocked.
You are entering recovery. Stock recovery
If you want a custom one either flash with fastboot or if you're rooted with a app. Goo manager. Rom manager etc.
Keep it mind that if you're on a stock ROM the custom recovery gets overwritten back to stock when the phone boots up the os
Q
UselessSniper001 said:
When u boot on the Google screen on the bottom centre does it have a padlock? If so then it is unlocked.
Click to expand...
Click to collapse
Then my phone is unlocked yes
polobunny said:
You need ADB (and ADB drivers installed, strongly recommend PDANet Android Drivers) and fastboot executable.
Custom recovery I suggest you use Clockworkmod Recovery.
I imagine your phone is already unlocked?
Click to expand...
Click to collapse
In installed the drivers and I installed the fastboot executable, but what do I have to do next? If I run the fastboot.exe, it just quickly shows a CMD-window and then disappears.
Edit:
I just discovered that, when I'm at the bootloader (I think it's called that way, the screen where you can select recovery), and I choose to reboot, I get the same 'error' as when I try to enter recovery.
Edit:
Alright, I was able to flash a new recovery, using cmd, but now when I try to enter my recovery, the phone gets stuck at a black screen with Google logo and padlock...
I have same problem as wolverine_2k who made the post. My nexus, can't start, I tried reboot and recovery but didn't work. After reboot or recovery I see Google logo, than Nexus screen and that is it. It didn't move to home screen and it stay with lighting screen all the time till I remove the battery. I can't power off it and don't know what to do. I can't transfer data with my PC (it don't recognize the device - only notice that "unknown device" is connected). Please any ideas?
P.S.: My English is not good, if someone answer do it simple please
Thanks!
i had a bad kernal flash and need to get into recovery..but my power button is broken
neo_x22000 said:
i had a bad kernal flash and need to get into recovery..but my power button is broken
Click to expand...
Click to collapse
adb reboot-bootloader
i can get into the bootloader screen but i cant select anything..if that helps
Cascabreu said:
adb reboot-bootloader
Click to expand...
Click to collapse
how do i do that..i never did it before
You can't. Either your power button needs to be working or you phone needs to actually boot up to send it into recovery
i can get the phone to boot...i just cant get into recovery
i can get to the bootloader screen i just cant select..recovery
What I meant by boot was to actually boot up the os. Not just make it to the bootloader.
so basically im ****ed??
Unless you get the power button to work you are stuck.
bump bump...anyone got any ideas!?!?!
adb reboot recovery ? Won't that work ?
Once you get into recovery you can use the bottom four buttons to navigate through recovery. If I am not mistaken Menu to scroll up, Home button to scroll down, Search to select and Back to go to the previous menu.
Anyways you can always flash from command line using fastboot.
When your power button is broke you can't scroll and select anything in fastboot. It freezes.
You can't adb reboot recovery if the phone doesn't boot up the os. Can't use any fastboot commands either cause its stuck.
He is screwed. Getting power button to work/unstick whatever you want to call it is only way.
http://forum.xda-developers.com/showthread.php?p=31360698
The guy named "shadowx360" suggests a couple of things in this thread.
Good luck
Vs Nexus S4G using tapatalk2
albundy2010 said:
When your power button is broke you can't scroll and select anything in fastboot. It freezes.
You can't adb reboot recovery if the phone doesn't boot up the os. Can't use any fastboot commands either cause its stuck.
He is screwed. Getting power button to work/unstick whatever you want to call it is only way.
Click to expand...
Click to collapse
If I am not mistaken he can boot into OS, He can go to bootloader but he just can't select Recovery because of the broken power button.
So using adb and fastboot shouldn't be a problem at all. As far CW recovery is concerned you can navigate without using power button as well
suhas_sm said:
If I am not mistaken he can boot into OS, He can go to bootloader but he just can't select Recovery because of the broken power button.
So using adb and fastboot shouldn't be a problem at all. As far CW recovery is concerned you can navigate without using power button as well
Click to expand...
Click to collapse
problem solved...i took the phone apart and cleaned the power button with alcohol..and it worked!!
For possible future use, you can install an app called Rebooter, which can boot your phone right into recovery.
fieldside99 said:
For possible future use, you can install an app called Rebooter, which can boot your phone right into recovery.
Click to expand...
Click to collapse
i have that APP...the problem was that my phone wouldnt even boot at all...it went to the google screen then to a black screen
delete
Hello guys. I just got my N5 and ofc rooted it , unlocked bootloader. Then when I booted it into recovery mode ( CWM recovery) I did factory reset as ussually. Then I realised that all my files on card were deleted os I couldnt even flash CM. I tried to pull off the battery. Right now phone does not want to boot into fasboot mode or normal boot. But it can be seen via pc. Is there any way to fix it? I am sure in 99% that this is a problem of deleted software not hardware. Right now its coneted to pc and the screen is on ( but it does not show anything. just pure black).
wojwem19 said:
Hello guys. I just got my N5 and ofc rooted it , unlocked bootloader. Then when I booted it into recovery mode ( CWM recovery) I did factory reset as ussually. Then I realised that all my files on card were deleted os I couldnt even flash CM. I tried to pull off the battery. Right now phone does not want to boot into fasboot mode or normal boot. But it can be seen via pc. Is there any way to fix it?
Click to expand...
Click to collapse
Connect the phone to the pc and type in cmd: adb devices (should see a serial number), if so type: adb reboot bootloader. Do you get into bootloader mode then? BTW did you format data or data factory reset?
wojwem19 said:
Hello guys. I just got my N5 and ofc rooted it , unlocked bootloader. Then when I booted it into recovery mode ( CWM recovery) I did factory reset as ussually. Then I realised that all my files on card were deleted os I couldnt even flash CM. I tried to pull off the battery. Right now phone does not want to boot into fasboot mode or normal boot. But it can be seen via pc. Is there any way to fix it? I am sure in 99% that this is a problem of deleted software not hardware. Right now its coneted to pc and the screen is on.
Click to expand...
Click to collapse
if it doesn't boot on fastboot or recovery and you said that your phone's display is on.. in what mode is it?? well if you can go into fastboot simply download the original system and flash it.. After you will boot your phone and connect it to the pc and flash recovery etc etc :good:
gee2012 said:
Connect the phone to the pc and type in cmd: adb devices (should see a serial number), if so type: adb reboot bootloader. Do you get into bootloader mode then? BTW did you format data or data factory reset?
Click to expand...
Click to collapse
I did factory reset. Tried to write in cmd adb devicies but it says that it doesnt know what it means. Maybe i need to download some kind of software to use adb?
N3xusS said:
if it doesn't boot on fastboot or recovery and you said that your phone's display is on.. in what mode is it?? well if you can go into fastboot simply download the original system and flash it.. After you will boot your phone and connect it to the pc and flash recovery etc etc :good:
Click to expand...
Click to collapse
It isnt any mode known for me. The screen is on but it doesnt show anything it is just pure black. The problem is that i can't get to fastboot mode ( volume down + power button).
wojwem19 said:
It isnt any mode known for me. The screen is on but it doesnt show anything it is just pure black. The problem is that i can't get to fastboot mode ( volume down + power button).
Click to expand...
Click to collapse
hold power for 10 seconds. then hold volume up + down + power
samersh72 said:
hold power for 10 seconds. then hold volume up + down + power
Click to expand...
Click to collapse
Okay did it. after those 10 secs the google screen showed up. Then i presed vol up+ down+ power and right now I am on this google screen. What should I do now? Right now I think it got some kind of bootloop.
Okay just updated my drives via windows and right now in Devicies menager it show up as a " Google nexus ADB Interface".
wojwem19 said:
Okay did it. after those 10 secs the google screen showed up. Then i presed vol up+ down+ power and right now I am on this google screen. What should I do now?
Click to expand...
Click to collapse
sir, hold the power button until it turned off then directly hold the volume up + down followed by power
samersh72 said:
sir, hold the power button until it turned off then directly hold the volume up + down followed by power
Click to expand...
Click to collapse
Okay did it and right now it shows in device menager as "QHSUSB_BULK" and windows can not find software for it. The google logo disappered and screen is off right now.
Okay i managed to turn it into fastboot mode. What should I do right now? and in devices menager it shows up as " Google nexus bootloader interface" Can anyone answer to me? it's really important for me.
wojwem19 said:
Okay did it and right now it shows in device menager as "QHSUSB_BULK" and windows can not find software for it. The google logo disappered and screen is off right now.
Click to expand...
Click to collapse
now try to boot into fastboot mode, volume down + power or both volume + power
wojwem19 said:
Okay did it and right now it shows in device menager as "QHSUSB_BULK" and windows can not find software for it. The google logo disappered and screen is off right now.
Click to expand...
Click to collapse
Can you get into bootloader mode? Hold power button for 10 seconds until it shuts off. Then press and hold vol + and- and then power
Sent from my Nexus 5
wojwem19 said:
Okay i managed to turn it into fastboot mode. What should I do right now?
Click to expand...
Click to collapse
good. flash stock images or boot into custom recovery (you can flash it) and sideload a rom or push a rom (see sticky threads in general section)
gee2012 said:
Connect the phone to the pc and type in cmd: adb devices (should see a serial number), if so type: adb reboot bootloader. Do you get into bootloader mode then? BTW did you format data or data factory reset?
Click to expand...
Click to collapse
Okay right now I am in fastboot mode and installed sdk manager. In folder sdk/platform-tools I enabled cmd with shift + right click. Run adb devicies and it said "daemon not running. starting it now on port 5037
daemon started successfully
list of devices attached".
And when i run it once again it says only "List of devicies attached".
wojwem19 said:
Okay right now I am in fastboot mode and installed sdk manager. In folder sdk/platform-tools I enabled cmd with shift + right click. Run adb devicies and it said "daemon not running. starting it now on port 5037
daemon started successfully
list of devices attached".
And when i run it once again it says only "List of devicies attached".
Click to expand...
Click to collapse
run this command when you are in fastboot mode
Code:
fastboot devices
and not adb
samersh72 said:
run this command when you are in fastboot mode
Code:
fastboot devices
and not adb
Click to expand...
Click to collapse
okay did it and now it showed a key. What should i do now ( i am really newbie in this things conected with flashing via adb. I always flash via recovery.) I already did fastboot flash recovery recovery.img and flashed the cwm 6.0.4.5
wojwem19 said:
okay did it and now it showed a key. What should i do now ( i am really newbie in this things conected with flashing via adb. I always flash via recovery.) I already did fastboot flash recovery recovery.img and flashed the cwm 6.0.4.5
Click to expand...
Click to collapse
now follow this guide to flash stock http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
samersh72 said:
now follow this guide to flash stock http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Click to expand...
Click to collapse
i love you man <3
I was trying to get the latest twrp '2.8.7.2'. I downloaded it and flashed the img to recovery and nothing seemed to happen so I tried flashing it to boot then I tried to reboot the system. Now when I try to turn it on I get stuck on the Google like it is turning but it just gets stuck. I tried Charging it now when I charge it I get stuck on the battery logo. When I try booting it Booting it into recovery(twrp) I get a black screen. I can tell the Screen is on because of the dim glow it gives off but it is not doing anything. Note: I am some what of a noob when it comes to this stuff, My nexus 5 was running Marshmallow, and I was running the Xtra smooth rom (it is very close to stock). Plz help. I have also just found out that the reason im getting the bootloop is I flashed the wrong version of TWRP need a fix PLZ HELP.
Did you try flashing stock recovery or twrp 2.8.7.1?
audit13 said:
Did you try flashing stock recovery or twrp 2.8.7.1?
Click to expand...
Click to collapse
I cant flash anything because it is stuck. If you can tell me how to do that it would be great. also I gave you the thanks thing.
Judah04 said:
I cant flash anything because it is stuck. If you can tell me how to do that it would be great. also I gave you the thanks thing.
Click to expand...
Click to collapse
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
asawoszc said:
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
Click to expand...
Click to collapse
When i boot into recovery mode the screen is on but it is black.
asawoszc said:
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
Click to expand...
Click to collapse
Also yes i do think I flashed the wrong TWRP. how do I flash the correct TWRP when I can't even get back into a tool to flash it?
Judah04 said:
When i boot into recovery mode the screen is on but it is black.
Click to expand...
Click to collapse
You dont need recovery, you need bootloader.
telep said:
You dont need recovery, you need bootloader.
Click to expand...
Click to collapse
Can you please explain to me exactly what to do. thank you. also my bootloader is unlocked. I also can get to fastboot so what is the diffrence between bootloader and fastboot.
Hold down the volume +, volume -, and power button. You'll be taken to a screen with the word START at the top. Now, connect the phone to your Windows computer using the USB cable, open a command prompt and type "fastboot flash recovery nameof twrpfile.img", press the enter key, use the volume button to select recovery, use the power button to enter recovery, press the power button, press volume + button, and you should enter TWRP.
Thank you but I do not own a windows computer
Then look up the respective commands. You flashed twrp over your kernel, you need to flash a proper boot.img (kernel) if you want the phone to boot. Fastboot is ran through bootloader. Flash the proper kernel in bootloader using fastboot.
wangdaning said:
Then look up the respective commands. You flashed twrp over your kernel, you need to flash a proper boot.img (kernel) if you want the phone to boot. Fastboot is ran through bootloader. Flash the proper kernel in bootloader using fastboot.
Click to expand...
Click to collapse
Thank you this sounds like it will work. But can you put it in more simple terms and give me links? plz. thx in advance.
Do you have access to a Windows computer to flash the commands? How did you flash TWRP?
audit13 said:
Do you have a computer?
Click to expand...
Click to collapse
I have a macbok air running mac os x 10.5.8.
audit13 said:
Do you have access to a Windows computer to flash the commands? How did you flash TWRP?
Click to expand...
Click to collapse
I flashed TWRP using the TWRP app it installed TWRP 2.8.7.1 I also unlocked the bootloader with a similar app.
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
audit13 said:
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
Click to expand...
Click to collapse
Just cheked it out I tried it and it didn't work but thx anyway. btw I am running android 6.0.
audit13 said:
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
Click to expand...
Click to collapse
It might not have been working because I did not enable USB Debuging. :crying:
USB debugging is required for adb commands. With fastboot mode, debugging isn't necessary.
audit13 said:
USB debugging is required for adb commands. With fastboot mode, debugging isn't necessary.
Click to expand...
Click to collapse
Can you please walk me through this i am some what of a beginner when it comes to some of these things. I can try the tool kits agin but need help.
I flashed TWRP to the device successfully, and proceeded to try to install Magisk 19.3 zip. It would begin to do a recovery bootloop. I fixed it using TWRP, and tried using the patched boot img from magisk manager instead. This is where things go wrong. After flashing boot.img, the phone refuses to boot, and asks me to do a factory reset. I did this twice, and the phone continued not to boot. I then tried installing the latest android Q factory image. The flash failed, and the phone stopped showing up when I do fastboot devices or adb devices. It is stuck in the bootloader telling me slot b is not bootable. I have tried different ports, but adb and fastboot are no longer responding.
Can't promise anything, but this might be a good spot to start
D3RP_ said:
Can't promise anything, but this might be a good spot to start
Click to expand...
Click to collapse
Unfortunately, this just tells me that it can't detect my device, even though it is plugged in. Its so weird that it makes it to the bootloader screen, but fastboot doesn't work.
skyward176 said:
Unfortunately, this just tells me that it can't detect my device, even though it is plugged in. Its so weird that it makes it to the bootloader screen, but fastboot doesn't work.
Click to expand...
Click to collapse
Have you tried just holding the volume up and power button for a good 30 seconds?
D3RP_ said:
Have you tried just holding the volume up and power button for a good 30 seconds?
Click to expand...
Click to collapse
Holding down the volume up and power buttons just restarts it repeatedly, and each time it restarts it tells me "ERROR: Operation Denied"
EDIT: OMG fastboot works! Let's see how this goes from here. TYSM!
ITS FIXED!! Thanks so much
skyward176 said:
ITS FIXED!! Thanks so much
Click to expand...
Click to collapse
Hello! I have exactly the same problem.
Can you explain step by step what you did after fastboot began to see your phone?
I held the vol up and power buttons. This allowed fastboot to see it, and let the flash all script from the stock boot image run. This gave an error, but after holding the vol. Up and power buttons again, the phone started right up.
skyward176 said:
I held the vol up and power buttons. This allowed fastboot to see it, and let the flash all script from the stock boot image run. This gave an error, but after holding the vol. Up and power buttons again, the phone started right up.
Click to expand...
Click to collapse
Ayyy! Good job!