Development TWRP for m12 U3 and U2

Development TWRP for m12 U3 and U2 - Samsung Galaxy M12

TWRP for m12 u3
(See post#2 for u2 version)
Built by Afaneh mod physwizz
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
Reboot, setup phone
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz

Afaneh TWRP modified by physwizz
For m12 u2
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
https://t.me/a127f_res/4)
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz

Installing a GSI
for a12s(a127f) and m12(m127f)
1. Unzip img file
2.Wipe data from twrp
3. Install IMG into system
4. Install my kernel
5. Reboot
If you need to install GApps
1. Wipe, advanced wipe
2. Select system, repair or change
3. Resize file system
4. Install GApps
GSI list
Exynos 850 Resources
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list
t.me
@physwizz

physwizz said:
You may need to swipe 6times to unlock
Click to expand...
Click to collapse
With this recovery, it's hard to call it a bug, since I stupidly disabled the screen timeout in the settings and everything is ok

physwizz said:
Installing a GSI
for a12s(a127f) and m12(m127f)
1. Unzip img file
2.Wipe data from twrp
3. Install IMG into system
4. Install my kernel
5. Reboot
GSI list
Exynos 850 Resources
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list
t.me
@physwizz
Click to expand...
Click to collapse
Thank you, as soon as you made the recovery, so now you can fully modify it, add hidden functions, so now also gsi, I'm just high, thank you very much, now there will be something else to occupy myself with

physwizz said:
Installing a GSI
for a12s(a127f) and m12(m127f)
1. Unzip img file
2.Wipe data from twrp
3. Install IMG into system
4. Install my kernel
5. Reboot
GSI list
Exynos 850 Resources
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list
t.me
@physwizz
Click to expand...
Click to collapse
It's a pity that there is no miui gsi firmware, well, okay, I will use what they give, thank you very much

physwizz said:
Installing a GSI
for a12s(a127f) and m12(m127f)
1. Unzip img file
2.Wipe data from twrp
3. Install IMG into system
4. Install my kernel
5. Reboot
GSI list
Exynos 850 Resources
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list
t.me
@physwizz
Click to expand...
Click to collapse
Hi, there's such a problem here, the touchscreen does not work on gsi firmware after the screen is locked, if the phone locks, or the screen just goes out, then the touchscreen stupidly no longer responds to clicks, and you have to restart, just like in twrp

KEMLEP said:
Hi, there's such a problem here, the touchscreen does not work on gsi firmware after the screen is locked, if the phone locks, or the screen just goes out, then the touchscreen stupidly no longer responds to clicks, and you have to restart, just like in twrp
Click to expand...
Click to collapse
I don't use GSIs

physwizz said:
I don't use GSIs
Click to expand...
Click to collapse
Are there any similar cores with a12 for m12 that can run gsi firmware?

KEMLEP said:
Are there any similar cores with a12 for m12 that can run gsi firmware?
Click to expand...
Click to collapse
I installed pixel experience and lineages ok

physwizz said:
I installed pixel experience and lineages ok
Click to expand...
Click to collapse
and there was no such thing that when unlocking the screen, the touchscreen does not work

Hi, I have such a question, I want to completely cut out all the system garbage from the firmware so that it can be installed via odin and there was no junk, since I just couldn't remove them from the off firmware, I think to do so, cut out all the garbage through the phone, delete all the extra folders, make a backup system and convert to img, and then flash through odin, will such an idea work?

Hi,
I tried the recovery in my m127g (u2). Though the recovery is actually for u3. As I haven’t yet found any working version for mine.
After I wipe, format data, it says, "Failed to mount '/data'." (attached photo 1)
After typing multidisabler in terminal, it says successful. (attached photo 2)
Any advice will be appreciated.

mdbshuvo said:
Hi,
I tried the recovery in my m127g (u2). Though the recovery is actually for u3. As I haven’t yet found any working version for mine.
After I wipe, format data, it says, "Failed to mount '/data'." (attached photo 1)
After typing multidisabler in terminal, it says successful. (attached photo 2)
Any advice will be appreciated.
Click to expand...
Click to collapse
No it won't work for u2.
If you send me your stock recovery.img I'll make one for u2

U3 version now in post #2

physwizz said:
U3 version now in post #2
Click to expand...
Click to collapse
Just installed this TWRP in my m127g (u2), worked just great. Thanks.

mdbshuvo said:
Just installed this TWRP in my m127g (u2), worked just great. Thanks.
Click to expand...
Click to collapse
Np

physwizz said:
Np
Click to expand...
Click to collapse
Just installed this TWRP in my m127g (u2), worked just great.
Click to expand...
Click to collapse
There was a problem I faced lately.
I had to flash my phone yesterday, tried to install the TWRP. The problem was internal storage not showing. Formatting and multidisabler doesn't help. Results in bootloop.
What works for me is installing OrangeFox (provided by you), formatting and typing multidisabler. Then use the method 1 here. Just for your information.
After installation it works fine.

mdbshuvo said:
There was a problem I faced lately.
I had to flash my phone yesterday, tried to install the TWRP. The problem was internal storage not showing. Formatting and multidisabler doesn't help. Results in bootloop.
What works for me is installing OrangeFox (provided by you), formatting and typing multidisabler. Then use the method 1 here. Just for your information.
After installation it works fine.
Click to expand...
Click to collapse
thanks for the feedback

Does this recovery work on sm-m127g/ds
Binary: u3
If yes what are the bugs for this model.
If no which one will work ?

Related

A12s Exynos 850 Development Orange Fox recovery for a12s (Exynos 850)

Orange Fox recovery
MTP working
Built by Roger F
Modified for u2 by @physwizz
U3/U4 in post #2
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Flash multidisabler
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
For rw go to terminal
mount -o rw,remount/system_root
@physwizz

Orange Fox recovery a127f
and a127f DS/N
Built by Roger
mod physwizz
For baseband u3 & u4
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz

Thanks.

TheWorldYT said:
Thanks.
Click to expand...
Click to collapse
I've just had confirmation that the u3/u4 one boots

physwizz said:
I've just had confirmation that the u3/u4 one boots
Click to expand...
Click to collapse
gsi's dont work, even though i did multidisabler it pops up with:
flash to;
boot
super
recovery
(my device a127f)

TheWorldYT said:
gsi's dont work, even though i did multidisabler it pops up with:
flash to;
boot
super
recovery
(my device a127f)
Click to expand...
Click to collapse
and i formatted my data in orange fox too, i don't know why it can't?
but i just reflashed rooted ap and reverted recovery so i don't brick my device

TheWorldYT said:
gsi's dont work, even though i did multidisabler it pops up with:
flash to;
boot
super
recovery
(my device a127f)
Click to expand...
Click to collapse
choose super

physwizz said:
choose super
Click to expand...
Click to collapse
I did that, it doesn't work, after installing it goes into a reboot loop.

I am going to stick to rooted stock for now

TheWorldYT said:
I am going to stick to rooted stock for now
Click to expand...
Click to collapse
Use my wizzROM-creator

physwizz said:
Use my wizzROM-creator
Click to expand...
Click to collapse
OK, will try later

TheWorldYT said:
OK, will try later
Click to expand...
Click to collapse
And my kernel

I confirm that ofox-rog-phy-u4-a12s works on my SM-127F/DSN with the U3 baseband with no issues whatsoever. Mounting, wiping, formatting, backups: everything works. Moreover, the internal multidisabler (called from the terminal) works! Moreover: for the first time I finally could install the phyzwizz kernels from this M12 thread and those work just fine for me, both v3 and v6. Therefore I conclude that SM-127F/DSN is actually internally M12, not A12. I don't know why Samsung chosen to name it A12.

I'll test the Vietnam-made version of SM-127F/DSN a bit later. My previous info is about the India-made version.

uluruman said:
I confirm that ofox-rog-phy-u4-a12s works on my SM-127F/DSN with the U3 baseband with no issues whatsoever. Mounting, wiping, formatting, backups: everything works. Moreover, the internal multidisabler (called from the terminal) works! Moreover: for the first time I finally could install the phyzwizz kernels from this M12 thread and those work just fine for me, both v3 and v6. Therefore I conclude that SM-127F/DSN is actually internally M12, not A12. I don't know why Samsung chosen to name it A12.
Click to expand...
Click to collapse
The build.prop shows that they were originally going to name it a12s
Also the m12 has 90Hz refresh rate
I think they change their collective minds since Oppo already had a12s registered.
I'll ask @Badger50 about having a group just for us

Orange Fox a127f DS/N u4
Built Roger F mod physwizz
Download tar file.
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
https://t.me/a127f_res/4)
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
Reboot, setup phone
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz

Development Orange Fox for M12 U2 & U3

Orange Fox for m12 u3 and u3
Built by Roger F
modified by physwizz
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
Reboot and setup phone completely
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz

In general, things are like this, I run Odin with administrator rights, I throw twrp and vbmeta, I run it, and at the vbmeta firmware stage, a failure occurs and an inscription in red in the loader, ( SW REV. CHECK FAIL(VBMETA) DEVICE: 0x3, BINARY: 0x0

physwizz said:
Afaneh TWRP modified by physwizz
For baseband u3
Download tar file.
Extract recovery.img from tar file
Method 1.
If you have already installed recovery and decrypted.
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to recovery
Method 2.
1. Download firmware
2. Extract ap file.
3. Patch with magisk
4. Flash with Odin
5. Download recovery.img
6. Install TWRP app
7. Install TWRP
8. Choose file to flash.(don't select device)
9. Select recovery.img.
10. Reboot to recovery.
Go to part B
Method 3.
1. Download recovery tar
2. Download vbmeta disabled tar
Exynos 850 Resources
t.me
3. Connect phone to PC
4. Go to Download mode
5. Flash recovery tar into ap with Odin
6. Flash vbmeta disabled tar into userdata with Odin
Part B
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
@physwizz
Click to expand...
Click to collapse
So, everything went, it worked, I found another vbmeta file from samsung sm-a217f and installed it, I'll attach a working file for m12 below

thank you so much for your work

KEMLEP said:
So, everything went, it worked, I found another vbmeta file from samsung sm-a217f and installed it, I'll attach a working file for m12 below
Click to expand...
Click to collapse
You don't need vbmeta.tar if you root using the patched ap file.

I can't believe only 1 person has installed it

I noticed an unpleasant bug in orange fox on m12, when it is blocked, the swipe does not work, I swipe with my finger, and it does not work, I have to restart

and another inscription pops up in the logo "E: A render request has failed"

KEMLEP said:
and another inscription pops up in the logo "E: A render request has failed"
Click to expand...
Click to collapse
I'll post a different one soon

physwizz said:
I'll post a different one soon
Click to expand...
Click to collapse
thank you very much, I'm waiting with impatience

So it's just the only one with the m12 model, the rest with the A12, although I saw a little man with the Indian version of the F12

KEMLEP said:
thank you very much, I'm waiting with impatience
Click to expand...
Click to collapse
Done
TWRP for m12 U3 and U2
TWRP for m12 u3 (See post#2 for u2 version) Built by Afaneh mod physwizz Download tar file. Extract recovery.img from tar file Method 1. If you have already installed recovery and decrypted. 1. Boot to recovery. 2. Install recovery.img 3...
forum.xda-developers.com

Thank you, everything works, but for some reason the swipe unlock does not work, I move my finger and it stands still and does not move, and so if you turn off the screen time, then everything works, thank you again, may God give you strength and reward you all the best for your labors

KEMLEP said:
Thank you, everything works, but for some reason the swipe unlock does not work, I move my finger and it stands still and does not move, and so if you turn off the screen time, then everything works, thank you again, may God give you strength and reward you all the best for your labors
Click to expand...
Click to collapse
Thanks.
Try swiping 6 times

Question are there any custom recovery that's compatible with a125m?

i've been looking for one everywhere but i cant really find one..
but if someone tells me how to like make a twrp for it (the latin variant), it'd be nice
thank you!

so, are there any news about this?

kalii_ said:
so, are there any news about this?
Click to expand...
Click to collapse
Nobody supports or develops for that variant of the A12. The only time was a custom recovery, that was abandoned and doesn't work anymore.

kalii_ said:
so, are there any news about this?
Click to expand...
Click to collapse
Nevermind... Ask @physwizz for your version.

TheWorldYT said:
Nevermind... Ask @physwizz for your version.
Click to expand...
Click to collapse
[AOSP-11] [OFFICIAL] Samsung SM-A125F TWRP
DISCLAIMER: I WAS NEVER, HAVE NEVER BEEN, AND WILL NEVER BE RESPONSIBLE OF ANY DAMAGES AGAINST YOUR DEVICES BY YOUR OWN MIS-OPERATIONS Install instructions: 1. Download an arbitrary SM-A125F firmware zip package on SamMobile.com, whose Android...
forum.xda-developers.com
If it doesn't work I can easily modify it

physwizz said:
[AOSP-11] [OFFICIAL] Samsung SM-A125F TWRP
DISCLAIMER: I WAS NEVER, HAVE NEVER BEEN, AND WILL NEVER BE RESPONSIBLE OF ANY DAMAGES AGAINST YOUR DEVICES BY YOUR OWN MIS-OPERATIONS Install instructions: 1. Download an arbitrary SM-A125F firmware zip package on SamMobile.com, whose Android...
forum.xda-developers.com
If it doesn't work I can easily modify it
Click to expand...
Click to collapse
well, it doesnt work for me sadly, since the A125F model is a little different from the 125m, itll just start rebooting. if you can make a modifed version for it, ill glady test it for you. the firmware that i got is the ZTO A125MUBU3BVG6
Thank you

kalii_ said:
well, it doesnt work for me sadly, since the A125F model is a little different from the 125m, itll just start rebooting. if you can make a modifed version for it, ill glady test it for you. the firmware that i got is the ZTO A125MUBU3BVG6
Thank you
Click to expand...
Click to collapse
Send me your stock recovery.img.lz4
And I'll see what I can do

physwizz said:
Send me your stock recovery.img.lz4
And I'll see what I can do
Click to expand...
Click to collapse
here it is:
recovery.img.lz4
Download recovery.img.lz4 for free from KrakenFiles.com
krakenfiles.com

kalii_ said:
here it is:
recovery.img.lz4
Download recovery.img.lz4 for free from KrakenFiles.com
krakenfiles.com
Click to expand...
Click to collapse
Ok

kalii_ said:
here it is:
recovery.img.lz4
Download recovery.img.lz4 for free from KrakenFiles.com
krakenfiles.com
Click to expand...
Click to collapse

thank you for the response, but unfortunally it soft bricks and won't boot past the boot screen. is there a way i can help to make it work?

hey, i've found the issue, i gave you the wrong file, sorry about that. if you got paypal maybe i can send you 5 dollars just to compensate you for my mistake...
thank you
@physwizz

kalii_ said:
hey, i've found the issue, i gave you the wrong file, sorry about that. if you got paypal maybe i can send you 5 dollars just to compensate you for my mistake...
thank you
@physwizz
Click to expand...
Click to collapse
Lol.
I don't take money

physwizz said:
Lol.
I don't take money
Click to expand...
Click to collapse
well, alright. just wanted to support you

kalii_ said:
well, alright. just wanted to support you
Click to expand...
Click to collapse
I do this for fun and to keep my old brain active
Unzip to get the tar file.
Installing instructions in next post

Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz

Question phone wont boot after installing twrp or gsi (a125w, originally an a125u)

i've unlocked the bootloader of my phone, and it boots fine with stock recovery & oneui core 3.1, but whenever i install twrp or a gsi, my phone ceases to boot. any ideas?

tekkitheidiot said:
i've unlocked the bootloader of my phone, and it boots fine with stock recovery & oneui core 3.1, but whenever i install twrp or a gsi, my phone ceases to boot. any ideas?
Click to expand...
Click to collapse
Do u install TWRP through Odin?

C-Andy said:
Do u install TWRP through Odin?
Click to expand...
Click to collapse
The twrp must be built for a125w.
If you want I can modify the one you're trying but you need to send me your a125w stock recovery.img.lz4

physwizz said:
The twrp must be built for a125w.
If you want I can modify the one you're trying but you need to send me your a125w stock recovery.img.lz4
Click to expand...
Click to collapse
hello, ive been looking for a twrp that is compatible with sm-a125w because that is my model. how would i send you the stock recovery for this?

imdrew1234 said:
hello, ive been looking for a twrp that is compatible with sm-a125w because that is my model. how would i send you the stock recovery for this?
Click to expand...
Click to collapse
Just post it.
Attach files

physwizz said:
Just post it.
Attach files
Click to expand...
Click to collapse
here is the file. i included boot and vbmeta as well.
the link: https://drive.google.com/drive/folders/1L5491qUjTXUHKxXdLLlSOLBmwFY1rou-?usp=sharing

imdrew1234 said:
here is the file. i included boot and vbmeta as well.
the link: https://drive.google.com/drive/folders/1L5491qUjTXUHKxXdLLlSOLBmwFY1rou-?usp=sharing
Click to expand...
Click to collapse
Unzip to find the tar file.
Installing instructions in next post

thank you so much ive been looking for this forever!

physwizz said:
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
Click to expand...
Click to collapse
i was also wondering if you knew why i cant make modifications to /system partition. whenever i check it in mount on the main screen of twrp /system still doesn't show. I wanted to get the pixel experience rom but i cannot due to this issue im facing since the system partition does not show as a partition i can flash the custom rom to as a gsi.

imdrew1234 said:
i was also wondering if you knew why i cant make modifications to /system partition. whenever i check it in mount on the main screen of twrp /system still doesn't show. I wanted to get the pixel experience rom but i cannot due to this issue im facing since the system partition does not show as a partition i can flash the custom rom to as a gsi.
Click to expand...
Click to collapse
Do you see system.img as a partition?

physwizz said:
Do you see system.img as a partition?
Click to expand...
Click to collapse
i do. only data and system image. data doesn’t show as flashable and system image is already full plus not enough storage for the custom rom. i think that there is supposed to be a prompt from twrp when you load into it to allow modifications to the system partition but this prompt does not show on this twrp which is weird. i cannot find a solution to this issue.

imdrew1234 said:
i do. only data and system image. data doesn’t show as flashable and system image is already full plus not enough storage for the custom rom. i think that there is supposed to be a prompt from twrp when you load into it to allow modifications to the system partition but this prompt does not show on this twrp which is weird. i cannot find a solution to this issue.
Click to expand...
Click to collapse
If you want to install a gsi to system.img you can.
You may need to go to advanced terminal and type wipe system Or wipe SYSTEM_ROOT

physwizz said:
If you want to install a gsi to system.img you can.
You may need to go to advanced terminal and type wipe system Or wipe SYSTEM_ROOT
Click to expand...
Click to collapse
but what do i do if the system image is only 3.1gb and the rom is 3.48 gb? is there any way i can repartition it or something?

imdrew1234 said:
but what do i do if the system image is only 3.1gb and the rom is 3.48 gb? is there any way i can repartition it or something?
Click to expand...
Click to collapse
Choose a smaller gsi

physwizz said:
Choose a smaller gsi
Click to expand...
Click to collapse
i can’t seem to find any other custom roms for my model sm-a125w they are all for the sm-a125f model and i don’t want to brick my phone. do you think the f model roms would work on my model or have any rom suggestions?

physwizz said:
Choose a smaller gsi
Click to expand...
Click to collapse
whenever i try to wipe system_root it says inaccessible or not found in twrp terminal. i dont know whats going wrong here.

imdrew1234 said:
whenever i try to wipe system_root it says inaccessible or not found in twrp terminal. i dont know whats going wrong here.
Click to expand...
Click to collapse
Wipe system

tr
physwizz said:
Wipe system
Click to expand...
Click to collapse
tried that as well and same error occurs.

Question Is there TWRP for SM-A127M U7?

Hello guys, I already have the bootloader unlocked and also root, I need TWRP to download some rom, as you know the phone is not so good for games, also I have One UI Core 5.0, so it is slower.
Any solution?
I also overclocked using Hktweaks, which improved but not that much.

Hello, how did you root? I have been waiting for a stable form for a long time, and I am also waiting for TWRP for Android 12 on the A127M (There are only 11)

Jeison Dg said:
Hello guys, I already have the bootloader unlocked and also root, I need TWRP to download some rom, as you know the phone is not so good for games, also I have One UI Core 5.0, so it is slower.
Any solution?
I also overclocked using Hktweaks, which improved but not that much.
Click to expand...
Click to collapse
I have one

Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (not just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz

physwizz said:
Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery from main menu (not just reboot)
be patient- It may take a while
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file.
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz
Click to expand...
Click to collapse
SM-A127M
Hi thanks...
I'm new to this, I stayed in this step, could you help me?
I already have an unlocked bootloader, and also root patched with normal magisk (patched with AP, does that mean that I already have boot.img and vbmeta.img patched?, and they are no longer needed?) Is some kind of magisk needed for my device?

I don't understand the methods well, I'm new.
So I would just have to put the twrp file that you left me and flash it by AP with Odin? and that's all? I already have a custom recovery? I don't understand well, sorry.

Jeison Dg said:
SM-A127M
Hi thanks...
I'm new to this, I stayed in this step, could you help me?
I already have an unlocked bootloader, and also root patched with normal magisk (patched with AP, does that mean that I already have boot.img and vbmeta.img patched?, and they are no longer needed?) Is some kind of magisk needed for my device?
Click to expand...
Click to collapse
You must use delta magisk because normal magisk won't patch vbmeta
Root for all Exynos 850 devices.
Root for all Exynos 850 devices. A. Root part 1 - Preparing the file I accept no responsibility for bricked phones but I will help you to recover. 1. Download the exact firmware (including upgrade date) for your device from https://samfrew.com...
forum.xda-developers.com

physwizz said:
Debes usar delta magisk porque magisk normal no parcheará vbmeta
XDA Forums
Android Forum for Mobile Phones, Tablets, Hardware & App Development
forum.xda-developers.com
Click to expand...
Click to collapse
http://

I understand, now how do I get magisk delta?

Jeison Dg said:
I understand, now how do I get magisk delta?
Click to expand...
Click to collapse
Tap on the link in post 7

OK thanks.
so now i type multidisabler twice in advanced, terminal. I reboot the twrp and make a backup and already reboot the device?

broo, I already have twrp but the internal storage does not appear, I already wrote multidisable twice and restarted the twrp

Jeison Dg said:
broo, I already have twrp but the internal storage does not appear, I already wrote multidisable twice and restarted the twrp
Click to expand...
Click to collapse
Did you do factory reset from stock recovery?
Go here
Exynos 850 Resources ]TWRPs] [Kernels]
Devices post#1 Root method post#2 TWRP post#3 Kernels post#4 Debloaters post #5 wizzROM creators post #6 Exynos 850 Devices 1. A12s A127f & A127m 2. M12 M127f & M127g 3. A21s A217f & A217m 4. F12s F127g 5. A13 A135f & A135m 6. M13...
forum.xda-developers.com

Thank you very much, I already have twrp, now I need a custom rom or a gsi and how to install it, any tutorial?

Database Info

welcome