Database Info

battery isn't charging, USB doesn't work

hello guys,
i have 2 Problems with my galaxy R.
My mobilephone doesn't load the battery when i plug in the charger. If i shut down the phone and connect the charger, the phone goes on and the empty battery symbol is drawn an the screen and the refresh logo of the battery is shown. But after 1-2 second's the screen is black and the phone turn off, this repeats the whole time.
When i turn on the phone, it starts without problems, when i plug in the charger it does nothing. I tryed to plug in the charger during the night, and the pho73ne loadet from 59% to 73%.
I have the Galaxy R with 3 Branding (Firmware, which was installed, when i get my galaxy R), but i have rooted the phone and have clockworkMod 4.xxx.
Now, i wanted to flash the firmware again (for warranty, to delete root and clockworkmod), but i cannot connect my phone to the pc. When i plug in the usc cable, my notebook don't recognize my phone and the phone does nothing.
My question now is, how can i remove root and clockworkmod, so that i can give the phone to the shop for warranty?
I hope you have ideas for me, and sorry for my bad english, i'm from Austria

now i made a video...
see here:
http://www.youtube.com/watch?v=PaOwBfx-J_g

try connecting ur phone in apx mode and check that is it a hardware issur or software, to connect in apx mode reinstall ur battery and press VOL DOWN + HOME + POWER keys and plug in usb cable while these keys are pressed, ur pc should detect a hardware named APX

rostiges_Handy said:
My question now is, how can i remove root and clockworkmod, so that i can give the phone to the shop for warranty?
Click to expand...
Click to collapse
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM

xlm13x said:
try connecting ur phone in apx mode and check that is it a hardware issur or software, to connect in apx mode reinstall ur battery and press VOL DOWN + HOME + POWER keys and plug in usb cable while these keys are pressed, ur pc should detect a hardware named APX
Click to expand...
Click to collapse
Hey, thank you for your help.
I tried this, but the phone only shows "Warning. A Custom OS can cause critical problems in phone and installed applications. If you want............. Volume up: Continue, Volume down: Cancel (restart phone)
The PC's doesn't do anything while connected via usb cable with the phone
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM
Click to expand...
Click to collapse
Thank you too :good: your are a great help for me , but are this files the right ones for the XWLA4 Firmware (2.3.6, 3 Austria) ?

these files will work with all the ROMs
Sent from my GT-I9103 using XDA

Hey buddy! This is what exactly happened with me! This is a physical damage. So there's nothing you can do by flashing other ROMs or stock ROMs or so....
Check out my thread here:-
http://forum.xda-developers.com/showthread.php?t=1663812
I've explained everything about my case and how I was able to revert back to my country's stock ROM, unroot the phone and revert back to stock recovery.
Then I gave my phone for repair to SSC and they told me that it's a physical damage. They changed the whole charging port of my phone. Took 3-4 days though. Depends on availability of that part.
And since my phone was in warranty and SSC guys are dumb, I got it done for FREE!!
---------- Post added at 09:46 AM ---------- Previous post was at 09:37 AM ----------
And please make the video "private" or "unlisted" on YouTube.
We seriously don't want to give any bad impressions to those who are thinking of buying SGR.

pankaj88 said:
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM
Click to expand...
Click to collapse
Hey bro, shall we add these files to a stickied thread so that all those in trouble can easily access it? I'm sure it'll be really helpful for many ppl.. Great work!
Proud to own a Galaxy R

vbz89 said:
Hey bro, shall we add these files to a stickied thread so that all those in trouble can easily access it? I'm sure it'll be really helpful for many ppl.. Great work!
Proud to own a Galaxy R
Click to expand...
Click to collapse
ASK the Moderator

we will tell cooleagle to add these two file to put it in Guide, so that every one can access this when ever required ...

hi guys,
since yesterday I get my phone back. It was repaired within the warranty.
Thank you again ankaj88 you helped me a lot
Now my phone works as it should

my galaxy r problem
now I wear neo3.0 firmware. so i want to flash rom to gb 2.3.6 update ics reason want but can not. usb not detect directly. ing any charge. want to follow the phone flash wear CWE install aborde

aliutak said:
now I wear neo3.0 firmware. so i want to flash rom to gb 2.3.6 update ics reason want but can not. usb not detect directly. ing any charge. want to follow the phone flash wear CWE install aborde
Click to expand...
Click to collapse
Hi buddy, I appreciate that you haven't started a new thread. Could you tell me which language you know ? I am asking because then I could understand your issue clearly.
If you would have searched a bit you would have surely got the answer in the FAQ's post (in the newbie guide thread), check this out:
Q. My device is not being detected on being connected to my PC but I can charge it via the wall / normal charger ! What to do?
First of all check if you have the latest Samsung Kies software installed as it also installs the latest Samsung USB drivers along with it which are required to connect your device to the PC. If they are installed & still your PC doesn't detect the device then you probably have corrupted drivers. To resolve this follow these steps: Uninstall Samsung Kies / Samsung USB drivers currently installed => Restart your PC => Reinstall Samsung Kies / Samsung USB drivers.
Q. I can't charge my device & my device is not being detected after connecting to my PC & Odin is not detecting my device ! What to do?
(The solution is valid only if you are experiencing all of the above conditions simultaneously)
Checkout this thread which could help you: => [Partial Fix] Galaxy R not getting detected on PC nor charging via a charger. ​
Hope this helps.

Problem with Panasonic Eluga Switch software and Download Mode

Hello, i have an Alcatel Idol 3 5,5 (6045) and i decided to root it, so installed all that i needed (drivers, adb ..). But the problem is that i need to unlock the OEM thing, so i need to flash my smartphone to its original stock ROM, so i downloaded the Panasonic Eluga Switch one (which is a rebranded idol 3) and launched it, but the problem it seem that my device CAN'T load in download mode, i tried anything :
Uninstalling/Reinstalling all drivers
Executing the software as administrator
Executing the software with Windows XP compatibility mode
The volume + and - and USB method
The ADB method, it worked for anything else (rebooting in fastboot and recovery mode) but it won't work for the download one, it just reboot normally, i don't know why all is exactly correct, i tested with MTP and PTP usb modes, and in two differents windows, and nothing worked at all.
Please, is someone have the solution to boot my stupid idol 3 on download mode i would be grateful to him. Cordially.

Issou said:
Hello, i have an Alcatel Idol 3 5,5 (6045) and i decided to root it, so installed all that i needed (drivers, adb ..). But the problem is that i need to unlock the OEM thing, so i need to flash my smartphone to its original stock ROM, so i downloaded the Panasonic Eluga Switch one (which is a rebranded idol 3) and launched it, but the problem it seem that my device CAN'T load in download mode, i tried anything :
Uninstalling/Reinstalling all drivers
Executing the software as administrator
Executing the software with Windows XP compatibility mode
The volume + and - and USB method
The ADB method, it worked for anything else (rebooting in fastboot and recovery mode) but it won't work for the download one, it just reboot normally, i don't know why all is exactly correct, i tested with MTP and PTP usb modes, and in two differents windows, and nothing worked at all.
Please, is someone have the solution to boot my stupid idol 3 on download mode i would be grateful to him. Cordially.
Click to expand...
Click to collapse
You don't Know how to go to Download Mode...
Just Turn off the device ..Press Volume UP AND DOWN AND POWER BUTTON AND THEN JUST CONNECT with usb and you will get RED SCREEN just press VOLUME UP until You will get Black Screen

Alek Dev said:
You don't Know how to go to Download Mode...
Just Turn off the device ..Press Volume UP AND DOWN AND POWER BUTTON AND THEN JUST CONNECT with usb and you will get RED SCREEN just press VOLUME UP until You will get Black Screen
Click to expand...
Click to collapse
Hi, i forgot it but its not actually my smartphone, but my friend one. And i use teamviewer to help with stuff, we did the USB method many time and he told me that it didn't work, no matter what he does

Issou said:
Hi, i forgot it but its not actually my smartphone, but my friend one. And i use teamviewer to help with stuff, we did the USB method many time and he told me that it didn't work, no matter what he does
Click to expand...
Click to collapse
First he need to go to download mode to work Panasonic Firmware...
Sent from my Idol 3 using Tapatalk

Alek Dev said:
First he need to go to download mode to work Panasonic Firmware...
Sent from my Idol 3 using Tapatalk
Click to expand...
Click to collapse
Yes i know, but we need first to get in the download mode, ur indications helping us but the problem is that i'm not sure about one step :
Does he need to maintain VOLUME UP, DOWN and POWER at the same time while plugging the USB cable ? Or just maintain them, wait for the idol 3 to start and after plugging the USB cable before it load the system ? Thanks in advance. (excuse me for my poor english)

Issou said:
Yes i know, but we need first to get in the download mode, ur indications helping us but the problem is that i'm not sure about one step :
Does he need to maintain VOLUME UP, DOWN and POWER at the same time while plugging the USB cable ? Or just maintain them, wait for the idol 3 to start and after plugging the USB cable before it load the system ? Thanks in advance. (excuse me for my poor english)
Click to expand...
Click to collapse
He need to maintain VOLUME UP, DOWN and POWER at the same time then plug USB cable
Sent from my Idol 3 using Tapatalk

Alek Dev said:
He need to maintain VOLUME UP, DOWN and POWER at the same time then plug USB cable
Sent from my Idol 3 using Tapatalk
Click to expand...
Click to collapse
He told me that it was toooooooooooooooooo hard for him, don't you have any tips ? (he is some kind of a weak guy)

Issou said:
He told me that it was toooooooooooooooooo hard for him, don't you have any tips ? (he is some kind of a weak guy)
Click to expand...
Click to collapse
It's Very Easy

Oh, it worked. Thanks.

my eluga switch show black screen after pressing power+vol up+vol down keys then pressing vol up but do,nt show download mode or not download firmware

N malik said:
my eluga switch show black screen after pressing power+vol up+vol down keys then pressing vol up but do,nt show download mode or not download firmware
Click to expand...
Click to collapse
The screen remains black in download mode, aftsr you get the red screen(volume up/down and power) then volume up screen will go black and remain black, that is normal behavior...

fix this issue by me thank you
---------- Post added at 03:37 PM ---------- Previous post was at 03:30 PM ----------
or thanks kal 250. thanks to reply

I switched boot slots using fastboot and now I can't access my phone via adb or fastboot

I was having some issues with installing a factory update on my Pixel 2, and tried using fastboot to switch the boot slot to slot B. Now I'm unable to access the phone via USB cable because adb does not see my device. The phone isn't even recognised in Device Manager anymore and nothing I do seems to fix that, including different cables and different PCs.
In bootloader mode, I can see:
Boot-slot: b
Console: DISABLED
Secure Boot: yes (PRODUCTION)
Device State: unlocked
ERROR: Slot Unbootable: Load Error
Any help would be appreciated. If I could just get Device Manager or adb to see my phone again, that would be a fix.

Tersnaus said:
I was having some issues with installing a factory update on my Pixel 2, and tried using fastboot to switch the boot slot to slot B. Now I'm unable to access the phone via USB cable because adb does not see my device. The phone isn't even recognised in Device Manager anymore and nothing I do seems to fix that, including different cables and different PCs.
In bootloader mode, I can see:
Boot-slot: b
Console: DISABLED
Secure Boot: yes (PRODUCTION)
Device State: unlocked
ERROR: Slot Unbootable: Load Error
Any help would be appreciated. If I could just get Device Manager or adb to see my phone again, that would be a fix.
Click to expand...
Click to collapse
Hook your device up to your PC and open adb/fastboot whilst in bootloader screen and then hold down the power button until the phone vibrates and check if your pc has recognised it. It may well take many attempts but I revived mine from a similar scenario doing the above. If you search the forum for slot unbootable you will find a thread for exactly this issue also.
Good luck

Junglism93 said:
Hook your device up to your PC and open adb/fastboot whilst in bootloader screen and then hold down the power button until the phone vibrates and check if your pc has recognised it. It may well take many attempts but I revived mine from a similar scenario doing the above. If you search the forum for slot unbootable you will find a thread for exactly this issue also.
Click to expand...
Click to collapse
Thanks for the advice - I managed to fix the problem in just this way, although I needed to do it on a friend's machine that was running Linux. Windows was hopeless. I was quite sure at that moment that I was going to need a new phone.

Tersnaus said:
Thanks for the advice - I managed to fix the problem in just this way, although I needed to do it on a friend's machine that was running Linux. Windows was hopeless. I was quite sure at that moment that I was going to need a new phone.
Click to expand...
Click to collapse
At least your back up and running mate, that's the main thing. Yeah, I know what you mean, i thought mine was a paperweight the first time I ran into this problem!

LEO-BX9 No USB Debug option ... Help?

#1- I have the LEO-BX9 and can not get it to connect to a computer via USB regardless what I try. The computer does not even acknowledge anything is connected when I plug in the charger with the watch. I have tested the charging cable and every connection is working fine (no broken wire or issues detected). I've tried on multiple computers with multiple OS and nothing.
#2- There is no option in Developer Options for "Debug by usb" it only has Debug by wifi or bluetooth.
I have been able to connect adb via wifi, and can send commands, but when i reboot into bootloader, it obviously loses wifi connectivity and I cant send any fastboot commands, and can not communicate at all with the watch. As such, I can not unlock or do anything.
I appreciate any help you can offer and thank you in advance for your awesomenes!

I guess my ultimate question is, How do I get a custom ROM on this watch without being able to connect while in stock bootload? Can I push a file over with ADB and use it somehow to install the custom ROM as a fake update or recovery. Can i unlock somehow. Anything? I beg help from you oh wise and kind xda'ers

extremegraphic said:
I guess my ultimate question is, How do I get a custom ROM on this watch without being able to connect while in stock bootload? Can I push a file over with ADB and use it somehow to install the custom ROM as a fake update or recovery. Can i unlock somehow. Anything? I beg help from you oh wise and kind xda'ers
Click to expand...
Click to collapse
change charger to a different one

Mira444 said:
change charger to a different one
Click to expand...
Click to collapse
Did that also... Still no option for USB debug and watch is not recognized by any device connected by usb.
Just looking for some way to load any custom ROM without usb. Anyone?

Very hard brick OnePlus 8t

I unbricked my OP8t following this guide and decided that just a working phone is not enough for me (yes i so... stubborn)
I flash rom via twrp and got errors: "can't find system_root partition" and "can't find vendor partition".
i flash new twrp via sideload and reboot phone(DON'T DO IT!)
Now my pc can't see phone, but phone can charging.
I don't think anyone can help me... but it's worth a try

Hi, follow this giude: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4180837/

gcsuri said:
Hi, follow this giude: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4180837/
Click to expand...
Click to collapse
Hi, i can't start Qualcomm EDL mode, device does not connect to pc
so it doesn't work for me

Hi,
disconnect and turn off the phone. Start the msm tool and begin the process. Then Push VOL+and VOL- while you connect the phone to the PC. The upload process must be started. (I needed to use USB2 interface to work)
best regards,

gcsuri said:
Hi,
disconnect and turn off the phone. Start the msm tool and begin the process. Then Push VOL+and VOL- while you connect the phone to the PC. The upload process must be started. (I needed to use USB2 interface to work)
best regards,
Click to expand...
Click to collapse
computer still does not see the phone, i tried usb 2.0 and 3.0

qwerty960 said:
computer still does not see the phone, i tried usb 2.0 and 3.0
Click to expand...
Click to collapse
can you boot linux and use edl package? It works for me. Be very carefull, do not touch the persist and persist_bkp partition. It breaks your mobile forever.

i

gcsuri said:
can you boot linux and use edl package? It works for me. Be very carefull, do not touch the persist and persist_bkp partition. It breaks your mobile forever.
Click to expand...
Click to collapse
Hi, ubuntu can't see my device too
i think it's die

When your is not recognize in edl mode maybe you don't have installed the Qualcomm driver

qwerty960 said:
Hi, ubuntu can't see my device too
i think it's die
Click to expand...
Click to collapse
try the following: turn off the phone. Type a command to a shell in linux: journalctl -f
Then connect to phone to the PC while you press vol+andvol- .
What's happening?

gcsuri said:
What's happening?
Click to expand...
Click to collapse
absolutely nothing

qwerty960 said:
absolutely nothing
Click to expand...
Click to collapse
Are you using the 1+ cable?
Have your mobile charged a bit?

gcsuri said:
Are you using the 1+ cable?
Have your mobile charged a bit?
Click to expand...
Click to collapse
I use cable from OP nord 2, usb 2.0 port
I dont know, but it was charging for about ten hours on original 65wt charge

I've found that at times getting MSM to work can be difficult. But I've always been able to, somehow, get it working.
There have also been occasions when I've had to reinstall the Qualcomm driver.
I don't have any specific suggestions for your, but I just wanted to share the notes I've made/collected regarding the tool (attached). They might give you some ideas of things to try.
Note: my PC is running Windows 11 and I'm using the original OP cable.