Database Info

[KERNEL][6.0.1] Judo Chop! Kernel for Galaxy Tab E 9.6 SM-T560NU running TouchWiz MM

Judo Chop! Kernel for Galaxy Tab E 9.6 SM-T560NU (Snapdragon 410)
** BY FLASHING THIS KERNEL YOU ASSUME ALL RISKS TO YOUR DEVICE!!!
** BOOTING WITH THIS KERNEL INSTALLED WILL TRIP YOUR KNOX COUNTER AND MAY VOID YOUR WARRANTY
** PRACTICE SAFE FLASHING AND BACKUP YOUR DEVICE WHILE YOU CAN
** HAI KARATE SEZ: BE CAREFUL HOW YOU USE IT!
This kernel is for the Samsung Galaxy Tab E 9.6 SM-T560NU (Qualcomm Snapdragon 410) running TouchWiz Marshmallow 6.0.1. It is based on the T560NUUES1BPL1 source code, and most of the features were ported from corsicanu's hadesKernel 2.5 source code. The vast amount of the credit for this should go to him and, by extension, to those who contributed to his kernel.
After comparing my Tab E 9.6 with my wife's Tab A 8.0 and seeing the Tab E's woefully inferior colour fidelity, I set out to compile a permissive kernel with KCAL support (I bump the saturation up to 40, by the way) but when I found corsicanu's source code I incorporated as many of his features as I could.
Some supported features:
KCAL colour calibration
Adreno Idler 1.1
USB fast charge
intelli_thermal 3.0
Powersuspend
Prima WLAN driver
SELinux permissive
init.d support
Frandom
ZEN/SIO/FIOPS IO schedulers
ADB insecure
DM-Verity disabled
Various optimizations
Compiled with Uber Toolchain 4.9
Sorry, this kernel DOES NOT and CAN NOT support the Spreadtrum-based SM-T560. The architecture is completely different.
Kernel Adiutor is the only app I have tested for adjusting the various settings of this kernel.
To install, download the .zip file and flash it in your custom recovery of choice. I have only tested this with the TWRP 3.0.2-0 version created by ashyx.
May 9, 2017: Initial public release 1.1
Source code:
https://github.com/Hai-Karate/Judo-Chop-Kernel-for-T560NU

[KERNEL][I9305][TW4.4.4][2017-06-16] ** TGPKERNEL **[v1.00][XXSFQD1-3.0.101]

TGPKERNEL​​
You can use Kernel Adiutor to change your settings.
TGPKernel Lite
This is a minial version of this kernel, with no extra governors, IO Schedulers, no F2FS, and SE Linux set to enforcing.
VARIANTS SUPPORTED
I9305
I9305N
I9305T
KERNEL INFORMATION
Built with: Linaro 4.9 Toolchain, optimized for cortexa9_neon (My custom build v1.01.20170615) - LINK
Kernel Base: I9305XXSFQD1
Ramdisk Base: I9305XXSFQD1
Linux Version: 3.0.101
FEATURES
Enabled hidden Governors and Schedulers
Added Insecure ADB
Disabled Secure Storage
Triangle Away Fix
Fixed charge off battery for old bootloaders
Updated LZO Compression
DOWNLOADS
DOWNLOAD VIA ANDROIDFILEHOST
CREDITS + THANKS
Samsung Open Source Release Center for the Source code
@Tkkg1994 for all his help and numerous code samples from his source
@morogoku for his help and advice
@osm0sis for Android Image Kitchen
Other devs that I have taken commits from which are credited in Github
XDA:DevDB Information
TGPKernel, Kernel for the Samsung Galaxy S III I9300
Contributors
djb77
Source Code: https://github.com/TheGalaxyProject/tgpkernel-s3.git
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.00
Stable Release Date: 2017-06-16
Created 2017-06-16
Last Updated 2019-05-22

Reserved

Reserved

I've noticed that LinageOS is out for this device now too, so I'll make a version for that too. Stay tuned...

Nice kernel!!!
<3

Any way to get the Wolfson DAC to sound like the i9300?? I Will donate if you can trick it!

it'sup said:
Any way to get the Wolfson DAC to sound like the i9300?? I Will donate if you can trick it!
Click to expand...
Click to collapse
I can look into it, I have the source code from the AGNI kernel here so hopefully it's just a matter of picking out the code and inserting it into my kernel.
Another thing I want to look into soon is LinageOS support, since I see it's available on this device.

it'sup said:
Any way to get the Wolfson DAC to sound like the i9300?? I Will donate if you can trick it!
Click to expand...
Click to collapse
See how this goes...
TGPKernel.I9305.v1.00.Wolfson.20170625

I'm getting a constant bootloop after flashing your kernel. Os: RR remix 7.1.2 Nougut -Twrp latest custom recovery -i9305T device. I've tried wiping dalvik and cache but all of does is return me back to Twrp!?

it'sup said:
I'm getting a constant bootloop after flashing your kernel. Os: RR remix 7.1.2 Nougut -Twrp latest custom recovery -i9305T device. I've tried wiping dalvik and cache but all of does is return me back to Twrp!?
Click to expand...
Click to collapse
It's only been worked on to boot for a stock 4.4.4 TW ROM so far, I'll work on some variants soon

hello. could you build a 4.4.4 kernel for my sc03e to run i9305 TW rom?

[Kernel][8.0/8.1][J701X]HeliosPro Kernel V2.6

Welcome to The HeliosPro Kernel Thread for Galaxy J7 Nxt/Core/Neo​
Built with Various Oreo 7870 Source.
Linaro GCC 7.3.1​
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Various Compiler Optimisations
[x]Compiled with Linaro7.3.1
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 8.0/8.1
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
The kernel comes included with EliteTuner to control various kernel parts.
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J710 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source
-- Credits --
@ananjaser1211 for this golden kernel and adding support for our device.
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general help
@JaskaranSM for Building it For J7velte
@mohitmallick17 for his zip template
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post
Github Source :http://github.com/jaskaranSM/Helios_7870
XDA:DevDB Information
HeliosPro Kernel V2.6-J7velte, Kernel for the Samsung Galaxy J7
Contributors
JaskaranSM
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.6
Stable Release Date: 2019-02-28
Created 2019-02-28
Last Updated 2019-02-28

[Kernel][8.0/8.1][J701X]HeliosPro Kernel V2.6

Welcome to The HeliosPro Kernel Thread for Galaxy J7 Nxt/Core/Neo​
Built with Various Oreo 7870 Source.
Linaro GCC 7.3.1​
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Various Compiler Optimisations
[x]Compiled with Linaro7.3.1
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 8.0/8.1
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
The kernel comes included with EliteTuner to control various kernel parts.
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J710 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source
-- Credits --
@ananjaser1211 for this golden kernel and adding support for our device.
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general help
@JaskaranSM for Building it For J7velte
@mohitmallick17 for his zip template
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post
Github Source :http://github.com/jaskaranSM/Helios_7870
XDA:DevDB Information
HeliosPro Kernel V2.6-J7velte, Kernel for the Samsung Galaxy J7
Contributors
JaskaranSM
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.6
Stable Release Date: 2019-02-28
Created 2019-02-28
Last Updated 2019-02-28

[KERNEL] [BETA] [P/Q] Pendulum Kernel for Note 7 Pro [2020-02-26]

DISCLAIMER
Code:
[B][SIZE="3"]Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Please read completely this thread before using for minimize FAQ.
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
[/SIZE][/B]
This is my personal kernel, based LA.UM.8.9.r1-07700-SM6xx CAF tags with android-linux-stable merged in (currently on v4.14.170).
Feels free to use, testing and bugs report to me (Telegram group exist for bugs report).
Requirements:
BACKUP your Boot.img and ROM Before flash this Kernel.
Unlock Bootloader as well.
Latest TWRP (recommend OrangeFox).
No need Wipe dalvik/art cache.
Main Features:
Kernel based on LA.UM.8.9.r1-08100-SM6xx CAF tags.
Linux v4.14.171.
Kernel compiled with Clang 11.0.0.
Compiled with Link Time Optimization (LTO) enabled.
Compiled with Control Flow Integrity (CFI) enabled.
Compiled with Shadow Call Stack (SCS) enabled.
F2FS supported.
Kernel scheduler is based on PELT implementation by Google on their Pixel 4's series kernels.
Security SElinux performance improvements.
Backported vmalloc performance improvement from mainline.
Android Low Memory Killer TNG from Sony Open Devices Kernel (test).
Network Signal Guru app compatible (maybe?).
Compiled with -O3 optimizations.
And many more, you can check at my Git.
Many thanks to:
Nathan Chancellor for maintaining android-linux-stable.
Park Ju Hyung
Francisco Franco
Sultan Alsawaf
Danny Lin
All of developers contributions which i picked from.
Downloads
Google Drive (2020-02-26)
XDA:DevDB Information
Pendulum Kernel, Kernel for the Xiaomi Redmi Note 7 Pro
Contributors
Yousef Algadri
Source Code: https://github.com/Haseo97/msm-4.14
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 666
Beta Release Date: 2020-02-26
Created 2020-02-12
Last Updated 2020-02-26

Reserved

Reserved

Kernel testing and bugs report group: https://t.me/joinchat/JKuKP0W5A__lg2rVeQxNfw

MIUI not tested.

NOTE: You don't need to reflash Magisk right after flashing kernel, AnyKernel3 has preserved it on their latest AK3.

Yousef Algadri said:
NOTE: You don't need to reflash Magisk right after flashing kernel, AnyKernel3 has preserved it on their latest AK3.
Click to expand...
Click to collapse
does safety net pass with this kernel pro

just internal error after boot on crdroid 6.2

plesit said:
just internal error after boot on crdroid 6.2
Click to expand...
Click to collapse
Yeah my bad, it'll be fixed soon

New update is out.
Changes:
Merged linux v4.14.171.
Merged CAF 'LA.UM.8.9.r1-08100-SM6xx.0' tags.
Kernel now compiled with LTO and LLD as an linker.
Enabled RELR relocation (LLD support it).
Enable Shadow Call Stack (SCS).
Enable BPF Jit.
Improved PELT performances.
Added slab sanitization kernel hardening and enabled it.
Inline with aosp-common android-4.14.
Fixed internal error message every boot.
Fixed sensor issues.

miui.eu 11 (beta rom) supported or not??

rkm8955389 said:
miui.eu 11 (beta rom) supported or not??
Click to expand...
Click to collapse
Read 5th post

Well me jabra fan sir ??

Here are the test results:
Kernel tested: Pendulum-BETA-violet-20200215-#610
ROM: Custom AOSP based on PE
Android version: Q/10
Magisk present, Root access present
Recovery: Peter's TWRP
Post flashing: No issues/errors seen, all working fine thus far.

Its time for big updates!
Changes for #666 build:
- Kernel is LTO, CFI and SCS enabled.
- RCU's update from msm-4.19.
- Compiled only Adreno 6xx driver.
- VLA avoidance.
- Disabled audit.
- Disabled unused erratums debugging.
- Use virtually mapped shadow call stacks.
- A few memory leaks fixes.
- Patch SafetyNet flags.
- Cleaned up FTS and NVT and disable ESD for NVT panel.
- Experimental New Pass Manager on LLD.
- Enabled RCU boost.
- Fixed wcd937x dmesg warnings.
- Force rcu_normal rather than rcu_expedited (ignored dts setting).
- Imported exFAT from k5.4 and enable it.
- Convert few drivers to new i_version API.
- F2fs upstream from f2fs-stable.
NOTE: Encrypted F2FS don't flash this, having a issues.
* FKM flasher integration now supported, get Franco Kernel Manager on Play Store any get Pendulum updates automatically! Paste this LINK! to import kernel configuration.

FKM screenshots.

How's the battery charging on this one? Qc 3.0-4?

Confirmed not working in miui 10

Confirm not working on havoc os 9