Today I was carrying out the process of unlocking the bootloader of my tablet, when I removed the back cover I realized that in the sd tray the SIM card area has the pins that read the SIM card, my question is, is there any way to activate the SIM card? I have lineage and a custom recovery
Alexcvrn said:
Today I was carrying out the process of unlocking the bootloader of my tablet, when I removed the back cover I realized that in the sd tray the SIM card area has the pins that read the SIM card, my question is, is there any way to activate the SIM card? I have lineage and a custom recovery
Click to expand...
Click to collapse
If you bought WiFi only version, it's basically impossible. Maybe that pins are for the SD. If that was possible, people wouldn't pay 100€ more for LTE version.
But if you have LTE version, be careful of what ROM you're using. I mean it won't break your tab, but in some ROMs LTE goes brrrr and doesn't works.
AGS2-W09 are versions with WIFI ONLY
AGS2-L09 are versions with LTE
I have the only wifi version, but those pins are lower than the SD card, I already installed a tray with sim and SD, the pins are just below the card without, however the tablet does not read it, However the tablet software has certain phone services
Alexcvrn said:
I have the only wifi version, but those pins are lower than the SD card, I already installed a tray with sim and SD, the pins are just below the card without, however the tablet does not read it, However the tablet software has certain phone services
Click to expand...
Click to collapse
WOW UMM. No idea bro. Try with another sim or ask huawei team. if that tab has the pins, idk why it doesn't works.
Related
I have a verizon xv6700 and I noticed that it has a compartment to add a sim card but is covered in plastic....Is this permanent or can I brake it to have access to it?
http://forum.xda-developers.com/forumdisplay.php?f=300
this is the forum for that phone
i suspect if you break it you break it
but think you can remove the sim if thats what you want i'm sure
they are wizer in the forum for the device
It's a CDMA device and thus does not have a SIM card in it.
Hi,
My Samsung Galaxy S I9000M (Canadian version, but pretty much same as I9000) all of a certain won't recognize the SIM card.
I've read pretty much every post here and on google wrt SIM card not being recognized, tried factory reset, flashed many different ROMs/modems and no luck.
I'm suspicious that the SIM card slot is damaged, as other SIM cards were also not recognized by the phone. Its possible, since I use a micro SIM card adaptor to fit in a micro SIM card into the regular sized slot.
Before I take it to a store, I'd like to ask one of you kind souls to compare the pic of my SIM card slot to your phone and see if there is a gold pin in the middle thats missing on my phone. I see 5 gold pins with no gold pin in the middle at the top of the slot -- should there be one there? (i.e. should there be six pins?)
Thank you so much in advance. I've spend over a week on this so far.
Just to update in case anyone else had the same question:
Yes, there was a pin missing, and the whole SIM card tray had to be replaced.
I just got this phone today unlocked from tmobile and inserted my custom-cut nano sim into the nano to micro adapter and inserted it into the phone. Everything was fine for a while but i started noticing my data and signal was cutting in and out by itself when the screen was off maybe for 3 minutes or longer. This is a significant problem as you can imagine. I checked every single setting i could and nothing would make it do so. Any advice or suggestions? Im using a straight talk att micro sim card that i had cut down to fit my i5S but came back to android and used a noosy sim adapter. Maybe its the fact that the card is custom cut (so it already doesnt fit the adapter like its supposed to)? I really need help here. Yes i have the proper apn settings and im fully stock.
Bump
So, I have a OnePlus 6 and when I got it first, I use my Meteor card so I had to cut it to make it smaller and now I bought a micro SIM card from Meteor 'Eir' but my phone can't read it or something since I can't call people and it says I can only make emergency calls.
Please help.
May be silly question but do you need to activate the sim first, have you tried it in another slot?
You need a nano SIM for the OP6. If you got a micro SIM and cut it down but it won't read it, you probably cut it incorrectly.
Does the phone detect the SIM at all?
But yes, as Geoff pointed out, if you did cut the SIM chances are you damaged it. Better get a nano card instead.
Have a note 20 ultra 5g that keeps telling me no sim card, no cellular network available. Have replaced sim card readers 2x in both motherboards, still the same. Have also tried another motherboard known good and get the same thing. But whats weird is on the motherboard that was Verizon unlocked it will tell me the phone number on the sim card. The known good motherboard that is unlocked factory. It will say the same thing. The verizon one will say sim card provider changed restart to new carrier and will reboot to T-mobile. I have replaced almost everything on the middle case as in connectors and such. Both motherboards will tell me phone number on sim card and have also tried a few different sim cards. All the same problem. Someone told me that the middle frame is the problem, but I don't believe that. Have also the verizon motherboard installed and sent this phone to Samsung and all they said was new motherboard needed, At a cost of almost $700.00. Still sim card problem and I have run out of ideas.