Related
HI I have recently Hardbricked my Moto G3 Osprey XT1541 I tried to resize the parditions I have read that there are no blankflashes for this device and tried various methods to unbrick Qualcom image loader Moto G4 play blankflash files etc. Would anyone with a working device be able to provide an image of the partitions or blankflash files to fix my phone.
Have you tried reflashing gpt.bin from EDL?
nicolasmart said:
Have you tried reflashing gpt.bin from EDL?
Click to expand...
Click to collapse
I have tried using a hacked version of fastboot https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292 which has the command reboot edl built in. This dosen't work as fastboot dosent work when i run fastboot devices my device isn't detected and when I run the bat script it says waiting for device and dosent work again because of fastboot. Is there another way to get into edl or fastboot or a test point method I can use
minilandl said:
I have tried using a hacked version of fastboot https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292 which has the command reboot edl built in. This dosen't work as fastboot dosent work when i run fastboot devices my device isn't detected and when I run the bat script it says waiting for device and dosent work again because of fastboot. Is there another way to get into edl or fastboot or a test point method I can use
Click to expand...
Click to collapse
Unfortunately, you must go with the test point one. It's not really difficult, plus, your device's warranty must already be over anyway.
nicolasmart said:
Unfortunately, you must go with the test point one. It's not really difficult, plus, your device's warranty must already be over anyway.
Click to expand...
Click to collapse
Is there a guide on how to do this is this i can't seem to find much all I could find was this http://forum.gsmhosting.com/vbb/f863/how-put-edl-mode-moto-devices-xt1643-2259230/ and this https://forum.xda-developers.com/moto-g-lte/general/test-moto-g-hints-t3386114.
minilandl said:
Is there a guide on how to do this is this i can't seem to find much all I could find was this http://forum.gsmhosting.com/vbb/f863/how-put-edl-mode-moto-devices-xt1643-2259230/ and this https://forum.xda-developers.com/moto-g-lte/general/test-moto-g-hints-t3386114.
Click to expand...
Click to collapse
IDK, can't help you with that. I don't own the device anymore.
Hello,
There is any way for unlocking bootloader and rooting the device Motorola Moto E6s XT2053-2 (Fiji) ?
I can allow oem unlock on develop settings. But fastboot says oem unlock doesn't exist and I can't flash anything.
:-(
Thank you very much
try to downgrade for the fist version of fiji firmware and put this command via fastboot
fastboot flashing unlock_critical
it worked with E6+
raphable said:
try to downgrade for the fist version of fiji firmware and put this command via fastboot
fastboot flashing unlock_critical
it worked with E6+
Click to expand...
Click to collapse
how did you downgrade with unlocked bootloader?
VD171 said:
how did you downgrade with unlocked bootloader?
Click to expand...
Click to collapse
install flash tool, and download the oldest rom for fiji from lolinet mirrors, then, extract the rom and power off your device, open flash tool and select the scatter file from the stock, press the download button. In the device, press volume down and connect to the computer, then, if flashed successfully, go to fastboot and run the command
raphable said:
install flash tool, and download the oldest rom for fiji from lolinet mirrors, then, extract the rom and power off your device, open flash tool and select the scatter file from the stock, press the download button. In the device, press volume down and connect to the computer, then, if flashed successfully, go to fastboot and run the command
Click to expand...
Click to collapse
which DA file did you use? also my oldest rom is 288.13, pretty much factory stock for my phone region but fastboot commands are still disabled
VD171 said:
Hello,
There is any way for unlocking bootloader and rooting the device Motorola Moto E6s XT2053-2 (Fiji) ?
I can allow oem unlock on develop settings. But fastboot says oem unlock doesn't exist and I can't flash anything.
:-(
Thank you very much
Click to expand...
Click to collapse
Here is instruction for e6 plus, i think for e6s it might work. I want try this later.
Stock firmwares can take here
Mortyk said:
Here is instruction for e6 plus, i think for e6s it might work. I want try this later.
Stock firmwares can take here
Click to expand...
Click to collapse
Thanks, I will try this !
VD171 said:
Thanks, I will try this !
Click to expand...
Click to collapse
Link to fitmware little incorrect.
I pasted link for 2053-2, but in my phone show 2053-1.
Here is for 2053-1.
Waiting for your report on the successful operation.
VD171 said:
Thanks, I will try this !
Click to expand...
Click to collapse
So you try unlock the phone or no?
well i tried rooting it by flashing an empty vbmeta and a patched boot.img and soft bricked my device because there's no way to unlock the bootloader with the current fw
gonna need to reflash my preloader but the DA isn't letting me flash anything to that partition
luridphantom said:
well i tried rooting it by flashing an empty vbmeta and a patched boot.img and soft bricked my device because there's no way to unlock the bootloader with the current fw
gonna need to reflash my preloader but the DA isn't letting me flash anything to that partition
Click to expand...
Click to collapse
If you try to flash any modified/patched partition to an unlocked device, certainly you will brick it.
VD171 said:
If you try to flash any modified/patched partition to an unlocked device, certainly you will brick it.
Click to expand...
Click to collapse
it's been a while and i've unbricked my device and now am trying to unlock the bootloader
anybody know how to enter brom mode on these fijis? if thats possible, this tool can unlock bootloaders by patching the seccfg partition: https://github.com/bkerler/mtkclient
luridphantom said:
it's been a while and i've unbricked my device and now am trying to unlock the bootloader
anybody know how to enter brom mode on these fijis? if thats possible, this tool can unlock bootloaders by patching the seccfg partition: https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
You can't.
I tested it, but it gave an error: Preloader - [LIB]: Status: Handshake failed, retrying...
br.rafael.venancio said:
I tested it, but it gave an error: Preloader - [LIB]: Status: Handshake failed, retrying...
Click to expand...
Click to collapse
yea i can enter meta mode so far but nothing else. even the usual volume down and usb plug in that works in spft doesn't work for mtkclient. must be some authentication required to enter brom for flashing
luridphantom said:
yea i can enter meta mode so far but nothing else. even the usual volume down and usb plug in that works in spft doesn't work for mtkclient. must be some authentication required to enter brom for flashing
Click to expand...
Click to collapse
You can't.
Hi! I am Ukraine bad english. I am unlock (not pay dongle, just pc) this smart moto e6s 4/64 (and this very simple for 2/32) Now, i am try in hex edit lk for remove 5 sec and message, flash lk from e6plus no try. info for edit lk for remove 5 sec and message? help. and help how root. (also i am unlock meizu m3 max, not pay dongle, just pc, flash preloader, reset pin frp work)
severagent007 said:
Hi! I am Ukraine bad english. I am unlock (not pay dongle, just pc) this smart moto e6s 4/64 (and this very simple for 2/32) Now, i am try in hex edit lk for remove 5 sec and message, flash lk from e6plus no try. info for edit lk for remove 5 sec and message? help. and help how root. (also i am unlock meizu m3 max, not pay dongle, just pc, flash preloader, reset pin frp work)
Click to expand...
Click to collapse
you used a pay dongle or what free tool to unlock? mtkclient doesnt work for me but i know the dongles can unlock the e6s
to root, go to lolinet and find your firmware version there, unzip and extract boot.img and patch with magisk. flash with fastboot
luridphantom said:
you used a pay dongle or what free tool to unlock? mtkclient doesnt work for me but i know the dongles can unlock the e6s
to root, go to lolinet and find your firmware version there, unzip and extract boot.img and patch with magisk. flash with fastboot
Click to expand...
Click to collapse
its very simple) from fastboot anl 29.137 firmware. Thanks i am try patch boot. fastboot still not flash any part but spft now flash editing lk vbmeta/ vbmeta i flash empty and lk with remove mess orange state. But i am dont flash twrp - i am dont know adress partition - in scatter not find him. Now i am search why its did
severagent007 said:
its very simple) from fastboot anl 29.137 firmware. Thanks i am try patch boot. fastboot still not flash any part but spft now flash editing lk vbmeta/ vbmeta i flash empty and lk with remove mess orange state. But i am dont flash twrp - i am dont know adress partition - in scatter not find him. Now i am search why its did
Click to expand...
Click to collapse
ok i will try when i get home. maybe i cant downgrade to that version and they removed it like with the e6
posted the lolinet link in the other thread. the scatter file is in there
Greetings All,
I recently purchased a Motorola E6 (Model XT2005-5).
Expecting to be able to install the TWRP recovery, I unlocked the bootloader.
Based on the TWRP site, there appears to be a recovery image for just about every phone on the planet, EXCEPT the E6 :-(
After scouring the net, I found about 4 or 5 possible recovery images, as well as a LOT of dead links.
None of these images appear to work.
They either just boot the phone to the existing system, or bring up a message about 'corrupt data'.
As per recommendations ,these images were booted using the Linux command:
'fastboot boot '
rather than flashed.
I HAVE managed to flash a stock ROM image. Although it boots OK, I get a 'bad key' message when it starts.
Donno if this is significant or not.
There also seems to be some data that was NOT cleared by the stock rom installation commands.
The phone was packaged for US Cellular, and I still get the US Cellular splash screen when the phone starts.
The source for updates also seems to be from US Cellular...
There is no problem using the SIM from my phone provider.
Does anyone have a valid link to a functional TWRP for this phone?
Are there additional commands needed (other than 'boot') to possibly get the images that I have found to work?
Is there some additional ROM that needs to be erased to clear out the US Cellular data/logo?
Any other advice or suggestions are GREATLY appreciated.
Thanx.
Richard Rosa
richardrosa said:
Greetings All,
I recently purchased a Motorola E6 (Model XT2005-5).
Expecting to be able to install the TWRP recovery, I unlocked the bootloader.
Based on the TWRP site, there appears to be a recovery image for just about every phone on the planet, EXCEPT the E6 :-(
After scouring the net, I found about 4 or 5 possible recovery images, as well as a LOT of dead links.
None of these images appear to work.
They either just boot the phone to the existing system, or bring up a message about 'corrupt data'.
As per recommendations ,these images were booted using the Linux command:
'fastboot boot '
rather than flashed.
I HAVE managed to flash a stock ROM image. Although it boots OK, I get a 'bad key' message when it starts.
Donno if this is significant or not.
There also seems to be some data that was NOT cleared by the stock rom installation commands.
The phone was packaged for US Cellular, and I still get the US Cellular splash screen when the phone starts.
The source for updates also seems to be from US Cellular...
There is no problem using the SIM from my phone provider.
Does anyone have a valid link to a functional TWRP for this phone?
Are there additional commands needed (other than 'boot') to possibly get the images that I have found to work?
Is there some additional ROM that needs to be erased to clear out the US Cellular data/logo?
Any other advice or suggestions are GREATLY appreciated.
Thanx.
Richard Rosa
Click to expand...
Click to collapse
There doesn't seem to be a working custom recovery for this device.
Moto devices are often referred to by development name or codename.
Your device should be SURFNA, look for that name on the bootloader screen
or
Code:
fastboot getvar product
I suggest following this thread for twrp
[ABANDONED] TWRP Dirty Port for Moto E6
https://www.getdroidtips.com/twrp-recovery-motorola-moto-e6/ None of my recoveries have worked for the E6, but I'm being linked as a developer for a working TWRP recovery. if you came from this link, DO NOT use my builds. I've deleted the...
forum.xda-developers.com
The bad key warning is pretty common with Moto devices after the bootloader is unlocked.
I have a general moto stock firmware thread here
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
There doesn't seem to be a working custom recovery for this device.
Moto devices are often referred to by development name or codename.
Your device should be SURFNA, look for that name on the bootloader screen
or
Code:
fastboot getvar product
I suggest following this thread for twrp
[ABANDONED] TWRP Dirty Port for Moto E6
https://www.getdroidtips.com/twrp-recovery-motorola-moto-e6/ None of my recoveries have worked for the E6, but I'm being linked as a developer for a working TWRP recovery. if you came from this link, DO NOT use my builds. I've deleted the...
forum.xda-developers.com
The bad key warning is pretty common with Moto devices after the bootloader is unlocked.
I have a general moto stock firmware thread here
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
I was afraid that was the answer.
Of all the cellphones in all the world, I had to buy this one :-(
I HAVE managed to get root access by flashing a Magisk modified recovery. However, this method is good for one boot per flash. It appears that once the boot completes, the modified recovery is gone from memory.
I DO get an error on flash about the image not signed or corrupt, and a similar message on the phone when booting, but once powered this way, I can 'su' in a shell.
How many times can the ROM be flashed before it starts to wear out?
And I STILL cannot find where USC hides it's bootanimation file. I removed the one in /system/media and a couple in /vendor, and that #$%^* 'Hello Moto' greeting and the USC logo screen still appear...
Thanx again for your help
Richard Rosa
richardrosa said:
I was afraid that was the answer.
Of all the cellphones in all the world, I had to buy this one :-(
I HAVE managed to get root access by flashing a Magisk modified recovery. However, this method is good for one boot per flash. It appears that once the boot completes, the modified recovery is gone from memory.
I DO get an error on flash about the image not signed or corrupt, and a similar message on the phone when booting, but once powered this way, I can 'su' in a shell.
How many times can the ROM be flashed before it starts to wear out?
And I STILL cannot find where USC hides it's bootanimation file. I removed the one in /system/media and a couple in /vendor, and that #$%^* 'Hello Moto' greeting and the USC logo screen still appear...
Thanx again for your help
Richard Rosa
Click to expand...
Click to collapse
Try patching both the recovery.img and the boot.img
[Guide] Root Motorola with Magisk (UnLocked Bootloader)(Non-TWRP method)
Root Motorola Devices with Magisk Note: This method has been working with most Moto Devices that the Bootloader can be UnLocked. If the Bootloader cannot be Unlocked this method will not work. Please only use this as a reference. If you require...
forum.xda-developers.com
sd_shadow said:
Try patching both the recovery.img and the boot.img
[Guide] Root Motorola with Magisk (UnLocked Bootloader)(Non-TWRP method)
Root Motorola Devices with Magisk Note: This method has been working with most Moto Devices that the Bootloader can be UnLocked. If the Bootloader cannot be Unlocked this method will not work. Please only use this as a reference. If you require...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you! That was the magic. It even got rid of the 'bad key' message on a normal boot!
Now if I can only find where that bootanimation file is hidden....
Thanx again.
Richard Rosa
What is a brick?If there is no usual way to recover your mobile, then it is called brick in my opinion. That means if you can't able to go to recovery and fastboot mode or the device is just blank with no sign of life.
When brick happens?It will happen because of locking bootloader with custom images or just because of Mediatek/Realme strange behaviour.
What we have to do if brick happens?Simply we have to flash stock firmware with Smart Phone Flash Tool(aka SPFlash Tool). With only SPFlash Tool we can't do anything, since we don't have permission for it. But with the advent of MTK-bypass, we can have full control over our device. If we don't have this MTK-bypass, then we have search for costly alternative's.
You can't flash only if your eMMC is damaged, which is the worst case because oppo phones are prone to eMMC failure.
Click to expand...
Click to collapse
Where to get firmware to flash?Download decrypted .ofp firmware from https://drive.google.com/file/d/1SOmRxix9_UtjOLLanXPYxf4YK1NrA_RW/view
Thanks to @bx2_nero for it.
What is the procedure for using MTK-bypass and SPFlashTool?MTK-bypass is a Python script and it needs different USB ways for working. So with these two in place, we can get our work done.
Linux UsersFor Linux we have to use FireISO or patched kernels for working of MTK-bypass.
Use the Linux guide by @bx2_nero at https://forum.xda-developers.com/t/...our-realme-6-6i-india-6s-linux-method.4251077
Windows UsersFor Windows we have to use libusb32 filter for MTK-bypass working.
Use the guide by @daeSundae at https://forum.xda-developers.com/t/...india-6s-using-spflash-tool-for-free.4222027/
MTK-bypass Official instructionsSee Github ReadMe at https://github.com/MTK-bypass/bypass_utility and XDA support thread at https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/
Creditsxyzz / xyz`: GitHub | XDA
chaosmaster / k4y0z: GitHub | XDA
Dinolek: GitHub | XDA
References- https://forum.hovatek.com/thread-37957.html
- https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/
- https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
- https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/
- https://forum.xda-developers.com/t/...ash-tool-authentication.4236881/post-84627359
MTKClient
After MTK-bypass got success, @viperbjk who is a reverse engineer came up with a FOSS replacement of SP Flash Tool.
MTKClient combines MTK-bypass and SP Flash Tool together and with many improvements and new features.
Ability to flash partitions without Scatter file
Ability to Readback partitions without specifying address and length
Ability to Format partitions without specifying address and length
Run multiple commands without reconnecting the device
Flash protected partitions(opporeserve2, special_preload, my_custom and cdt_engineering) with locked bootloader
Unlock bootloader without need of in-depth test/Deep testing app from Realme
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
www.github.com
Reserved
I need help, my C12 is stuck on fastboot mode. This happened after flashing a GSI using TWRP and flashing the image in the Super (System and Vendor) partition.
I tried rebooting to recovery mode by executing fastboot reboot recovery but it says that bootloader is not known.
I also tried to flash a GSI (taught it might fix the problem) using fastboot flash system system.img but it says that no partition named system exists.
Please suggest what I should do.
Bro, can you make a video about this? my realme c12 got hardbricked after I flashed ozip file from stock recovery while bootloader is unlocked. it got hardbricked when I reboot it after flashing ozip
DFM23 said:
Bro, can you make a video about this? my realme c12 got hardbricked after I flashed ozip file from stock recovery while bootloader is unlocked. it got hardbricked when I reboot it after flashing ozip
Click to expand...
Click to collapse
What is the present state of the device? Can you able to boot to fastboot mode?
HemanthJabalpuri said:
What is the present state of the device? Can you able to boot to fastboot mode?
Click to expand...
Click to collapse
it has no sign of life, cant go to recovery or fastboot. when I connect it to pc it goes connect and disconnected.
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
youcancallmekhen said:
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
Click to expand...
Click to collapse
Use latest platform tools
youcancallmekhen said:
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
Click to expand...
Click to collapse
HemanthJabalpuri said:
Use latest platform tools
Click to expand...
Click to collapse
Sir I've finally able to reboot to recovery. I've tried flashing the OZIP file for my model but after some time it says Installation failed. When I was still using custom recovery, I wasn't able to mount System and Vendor. My bootloader is also unlocked sir.
Should I lock my bootloader sir?
youcancallmekhen said:
Should I lock my bootloader sir?
Click to expand...
Click to collapse
Don't lock bootloader.
Download this https://drive.google.com/file/d/1jLdDz7M0G_KPDn4jXjTeuFnO1C-MFaBs/view (It is from A.87 UI 1.0 Stock ROM)
Extract above 7z file and flash ONLY super partition from it and TWRP from https://androidfilehost.com/?fid=7161016148664807816 with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery TWRP.img
fastboot reboot recovery
Now enable 'Skip Treble Compatibility error' in TWRP settings and flash stock ROM .ozip in TWRP.
Thanks
HemanthJabalpuri said:
Don't lock bootloader.
Download this https://sourceforge.net/projects/realmec11/files/Fastboot-ROM/[email protected]/download
Extract above 7z file and flash ONLY super partition from it with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery stock-recovery.img
fastboot reboot recovery
Now flash stock ROM .ozip in stock recovery.
Thanks
Click to expand...
Click to collapse
Oh my, thank you so much sir. You have no idea how much you are helping me sir! My parents will be so happy, and we won't waste money… Thank you so much sir…
I'll update you sir after doing these, thank you sir! ♥
HemanthJabalpuri said:
Don't lock bootloader.
Download this https://sourceforge.net/projects/realmec11/files/Fastboot-ROM/[email protected]/download
Extract above 7z file and flash ONLY super partition from it with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery stock-recovery.img
fastboot reboot recovery
Now flash stock ROM .ozip in stock recovery.
Thanks
Click to expand...
Click to collapse
I don't have much data left today sir, so I will download this later. Thank you very much again sir, you're my hero!
DFM23 said:
it has no sign of life, cant go to recovery or fastboot. when I connect it to pc it goes connect and disconnected.
Click to expand...
Click to collapse
Follow the guide and you can get your mobile back to life.
Thanks
HemanthJabalpuri said:
Follow the guide and you can get your mobile back to life.
Thanks
Click to expand...
Click to collapse
thank you bro, Ill follow your guide then. btw does the RMX2185 firmware you provided works with realme c12? I look it up and saw that it was for realme c11
DFM23 said:
thank you bro, Ill follow your guide then. btw does the RMX2185 firmware you provided works with realme c12? I look it up and saw that it was for realme c11
Click to expand...
Click to collapse
Yes, both use same firmware.
I tried the guide but when I click download on sp flash tool it would stay in red bar for 1 min or more then message will appear saying STATUS_EXT_RAM_EXCEPTION. I have read a same comment here in xda about realme c12 I dont know if its only on realme c12.
Thanks for your works sir, you are super awesome!
I rooted My Device (Realme X2 Pro) by Magisk. And Since My Device Bootloader was unlocked I Unrooted/Uninstalled MAgisk.
While Locking Bootloader My Device is Stuck where It displays { The Current Image (boot/recovery) have been destroyed dand cannot boot. Please flash the correct Image or Contact Customer Service to fix it }
While Trying to ENter the Fast Boot Mode {By pressing Volume + - and Power Button} Its Unresponsive
It shows Realme Logo And chrging Display for a Instant
Do you Know any way around to fix my Problem?
Bhuprab said:
I rooted My Device (Realme X2 Pro) by Magisk. And Since My Device Bootloader was unlocked I Unrooted/Uninstalled MAgisk.
While Locking Bootloader My Device is Stuck where It displays { The Current Image (boot/recovery) have been destroyed dand cannot boot. Please flash the correct Image or Contact Customer Service to fix it }
While Trying to ENter the Fast Boot Mode {By pressing Volume + - and Power Button} Its Unresponsive
It shows Realme Logo And chrging Display for a Instant
Do you Know any way around to fix my Problem?
Click to expand...
Click to collapse
Since your device is Qualcomm, I don't know. In any device, we have to flash stock rom (or atleast the partitions that are modified) to get device in working state.
You may get better help at https://forum.xda-developers.com/f/realme-x2-pro-questions-answers.9439/
Thanks
Hi guys,
so after I got my xiaomi with a global ROM and wanted to update and that is when I accidentally relocked the bootloader. The version of ROM was invalid apparently and wouldn't let me boot and now I'm stuck in fastboot mode.
My problem is as follows:
-can't enter recovery, stuck at fastboot no matter how many times I try and reboot
-adb not working since I didn't enable it
-bootloader locked (miflash says so and it can't unlock it since I didn't check 'oem unlock enable' and I cannot boot ROM so I can't enable it)
-fastboot flashing says 'not allowed in lock state'
-edl mode not available
I've seen tutorials where people opened their phones to force the phone into edl mode via the testing points but is that the only way`?
Any suggestions on how I could unbrick it?
Much appreciated
yes, it is the only way.
koniv90 said:
Hi guys,
Any suggestions on how I could unbrick it?
Much appreciated
Click to expand...
Click to collapse
you can use this tool to flash the phone on fastboot mode
Xiaomi King Tool - Home.
xiaomikingtool.com
its cost you only 5 credit
Can you flash files by fastboot? if so, flash the global rom images one by one, then reboot
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
I need help please my phone redmi k50 gaming is no recovery and . bootloader is locked
eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
This what I'm facing
Dims_Camper said:
yes, it is the only way.
Click to expand...
Click to collapse
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
kskksks said:
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
Click to expand...
Click to collapse
Nope, only very old devices.
NOSS8 said:
Nope, only very old devices.
Click to expand...
Click to collapse
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
kskksks said:
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
Click to expand...
Click to collapse
Have you tried to flash stock rom?
I mean, if you have Chinese rom before, just flash with latest Chinese rom.
Ghanaba said:
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
Click to expand...
Click to collapse
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
jholfran3 said:
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
Click to expand...
Click to collapse
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
flashing is possible with modified firehose programmer (no auth factory loader) or with authorized xiaomi account. both solutions are paid service and cannot advertised here.
please -as always- read the thread you posted in. I can see useful information shared already. wait for other replies.
letsgofly said:
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
Click to expand...
Click to collapse
Hi, try to flash the .img files from the fastboot stock rom whit cdm in fastboot, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
example:
fastboot flash boot boot.img
fastboot flash cust cust.img
etc.
jholfran3 said:
Hi, try to flash the .img files from the fastboot stock rom, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
Click to expand...
Click to collapse
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
NOSS8 said:
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
Click to expand...
Click to collapse
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
jholfran3 said:
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
Click to expand...
Click to collapse
To install a recovery, the bootloader must be unlocked.