Database Info

Bootloop, only fastboot and EDL mode no system boot please help Axon 10 Pro

hi Guys
I'm in the forum for a very long time as an assistant helper now it has got me hard I have an Axon 10 Pro with curly boot loader and trying to flash a TWRP I have somehow the device or SotA and SlotB have shrunk. The Axon Bootet permanently in 0.5 second cycle and also a FULL Restot or FULL Flash with EDL Tool has not changed anything. Likewise, a new flash about fastboot with the command (fastboot flash boot_a boot.img) the same for boot_b then try with fastboot command (fastboot boot twrp.img) Recovery to start without success fastboot erase boot_a and boot_b has also flashing new but it does not start. Always bootloop:crying::crying::crying::crying:

the Axon 10 pro is back because he had no backup of all we had from my Axon 10 pro made a backup with the edl tool (Backup all) and have then copied his efs backup purely and then this with then on the Axon 10 flashed the Axon 10 pro is now back

Where did you get the twrp from?

From udev
On his donload page
https://forum.xda-developers.com/showpost.php?p=80156866&postcount=3

I had a bootloop issue as well and even though I reflashed using the EDL tool, it doesn't erase and the errors remained, but when I entered EDL mode and reflashed using the Xiaomi Flash Tool, storage was completely erased and the device was flashed cleanly and booted correctly.

I've encountered a similar issue with my Axon (2020U version). I can boot into EDL but nothing else (no fastboot, recovery, etc.). I previously had TWRP up and running successfully, not sure what happened.
Is there a full EDL zip or similar that I can flash to return everything to stock? I tried restoring with the EDL tool but with no success

jbeaulieu said:
I've encountered a similar issue with my Axon (2020U version). I can boot into EDL but nothing else (no fastboot, recovery, etc.). I previously had TWRP up and running successfully, not sure what happened.
Is there a full EDL zip or similar that I can flash to return everything to stock? I tried restoring with the EDL tool but with no success
Click to expand...
Click to collapse
The reason the EDL tool may not work is that is doesn't have the capability to erase. The boot loop that occurs is usually due a corrupt bootfile. Use the MiFlash fastboot recovery tool. Make sure to select the clean all button at the bottom. Place your phone in EDL mode. Hit refresh to make sure your phone is detected. Select the EDL file and then hit flash.

jim262 said:
The reason the EDL tool may not work is that is doesn't have the capability to erase. The boot loop that occurs is usually due a corrupt bootfile. Use the MiFlash fastboot recovery tool. Make sure to select the clean all button at the bottom. Place your phone in EDL mode. Hit refresh to make sure your phone is detected. Select the EDL file and then hit flash.
Click to expand...
Click to collapse
Apologies for my ignorance - what exactly am I flashing? I see the "clean all" radio button, but I'm not sure what EDL package to flash after selecting that option - is there a 2020U package floating around that I'm not seeing?

jbeaulieu said:
Apologies for my ignorance - what exactly am I flashing? I see the "clean all" radio button, but I'm not sure what EDL package to flash after selecting that option - is there a 2020U package floating around that I'm not seeing?
Click to expand...
Click to collapse
The EDL package, use the same EDL package that you used with the EDL tool. Just select the "clean all" radio button. Select the path to the EDL , hit refresh once phone, in EDL mode, is detected, hit flash.

jim262 said:
The EDL package, use the same EDL package that you used with the EDL tool. Just select the "clean all" radio button. Select the path to the EDL , hit refresh once phone, in EDL mode, is detected, hit flash.
Click to expand...
Click to collapse
Okay, I'm trying to use MiFlash to restore the backup I took through the original EDL tool. The MiFLash tool is only timing out with a "cannot receive hello packet" - was this something you encountered as well?

jbeaulieu said:
Okay, I'm trying to use MiFlash to restore the backup I took through the original EDL tool. The MiFLash tool is only timing out with a "cannot receive hello packet" - was this something you encountered as well?
Click to expand...
Click to collapse
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.

jim262 said:
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.
Click to expand...
Click to collapse
Ah, okay. I have the US version - A2020U. Unless I'm mistaken, it looks like there isn't a full EDL zip file available for my version yet, so I might be stuck

There were EDL files up, but apparently they were taken down for some reason.

in the russians there are the 1.6 of the g model as edl (which one can use in a brick) but I do not know if this is synonymous with the u model as you would have to ask @Unjustified Dev or something
@MOD
I hope that the links are allowed here else delete please
1.6 g model edl
http://4pda.ru/forum/index.php?showtopic=965431&st=0#entry88768840
And the lonk too the forum
http://4pda.ru/forum/index.php?showtopic=965431

Chris axon 7 said:
in the russians there are the 1.6 of the g model as edl (which one can use in a brick) but I do not know if this is synonymous with the u model as you would have to ask @Unjustified Dev or something
@MOD
I hope that the links are allowed here else delete please
1.6 g model edl
http://4pda.ru/forum/index.php?showtopic=965431&st=0#entry88768840
And the lonk too the forum
http://4pda.ru/forum/index.php?showtopic=965431
Click to expand...
Click to collapse
Thanks for sharing these. @Unjustified Dev do you happen to know if the 1.6 2020G EDL would be able to be flashed to a 2020U model to recover from a brick? Or if not, is there a place to obtain the proper files, either here on the forums or via PM?

jim262 said:
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.
Click to expand...
Click to collapse
Please share us the EDL file for the Chinese version.

has anyone found the US EDL file yet?

Futility's Forgotten Soldier said:
has anyone found the US EDL file yet?
Click to expand...
Click to collapse
Still waiting. I'm stuck on the EU version.

Unbrick your Realme C12

What is a brick?​If there is no usual way to recover your mobile, then it is called brick in my opinion. That means if you can't able to go to recovery and fastboot mode or the device is just blank with no sign of life.
When brick happens?​It will happen because of locking bootloader with custom images or just because of Mediatek/Realme strange behaviour.
What we have to do if brick happens?​Simply we have to flash stock firmware with Smart Phone Flash Tool(aka SPFlash Tool). With only SPFlash Tool we can't do anything, since we don't have permission for it. But with the advent of MTK-bypass, we can have full control over our device. If we don't have this MTK-bypass, then we have search for costly alternative's.
You can't flash only if your eMMC is damaged, which is the worst case because oppo phones are prone to eMMC failure.
Click to expand...
Click to collapse
Where to get firmware to flash?​Download decrypted .ofp firmware from https://drive.google.com/file/d/1SOmRxix9_UtjOLLanXPYxf4YK1NrA_RW/view
Thanks to @bx2_nero for it.
What is the procedure for using MTK-bypass and SPFlashTool?​MTK-bypass is a Python script and it needs different USB ways for working. So with these two in place, we can get our work done.
Linux Users​For Linux we have to use FireISO or patched kernels for working of MTK-bypass.
Use the Linux guide by @bx2_nero at https://forum.xda-developers.com/t/...our-realme-6-6i-india-6s-linux-method.4251077
Windows Users​For Windows we have to use libusb32 filter for MTK-bypass working.
Use the guide by @daeSundae at https://forum.xda-developers.com/t/...india-6s-using-spflash-tool-for-free.4222027/
MTK-bypass Official instructions​See Github ReadMe at https://github.com/MTK-bypass/bypass_utility and XDA support thread at https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/
Credits​xyzz / xyz`: GitHub | XDA
chaosmaster / k4y0z: GitHub | XDA
Dinolek: GitHub | XDA
References​- https://forum.hovatek.com/thread-37957.html
- https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/
- https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
- https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/
- https://forum.xda-developers.com/t/...ash-tool-authentication.4236881/post-84627359

MTKClient
After MTK-bypass got success, @viperbjk who is a reverse engineer came up with a FOSS replacement of SP Flash Tool.
MTKClient combines MTK-bypass and SP Flash Tool together and with many improvements and new features.
Ability to flash partitions without Scatter file
Ability to Readback partitions without specifying address and length
Ability to Format partitions without specifying address and length
Run multiple commands without reconnecting the device
Flash protected partitions(opporeserve2, special_preload, my_custom and cdt_engineering) with locked bootloader
Unlock bootloader without need of in-depth test/Deep testing app from Realme
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
www.github.com

Reserved

I need help, my C12 is stuck on fastboot mode. This happened after flashing a GSI using TWRP and flashing the image in the Super (System and Vendor) partition.
I tried rebooting to recovery mode by executing fastboot reboot recovery but it says that bootloader is not known.
I also tried to flash a GSI (taught it might fix the problem) using fastboot flash system system.img but it says that no partition named system exists.
Please suggest what I should do.

Bro, can you make a video about this? my realme c12 got hardbricked after I flashed ozip file from stock recovery while bootloader is unlocked. it got hardbricked when I reboot it after flashing ozip

DFM23 said:
Bro, can you make a video about this? my realme c12 got hardbricked after I flashed ozip file from stock recovery while bootloader is unlocked. it got hardbricked when I reboot it after flashing ozip
Click to expand...
Click to collapse
What is the present state of the device? Can you able to boot to fastboot mode?

HemanthJabalpuri said:
What is the present state of the device? Can you able to boot to fastboot mode?
Click to expand...
Click to collapse
it has no sign of life, cant go to recovery or fastboot. when I connect it to pc it goes connect and disconnected.

How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.

youcancallmekhen said:
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
Click to expand...
Click to collapse
Use latest platform tools

youcancallmekhen said:
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
Click to expand...
Click to collapse
HemanthJabalpuri said:
Use latest platform tools
Click to expand...
Click to collapse
Sir I've finally able to reboot to recovery. I've tried flashing the OZIP file for my model but after some time it says Installation failed. When I was still using custom recovery, I wasn't able to mount System and Vendor. My bootloader is also unlocked sir.
Should I lock my bootloader sir?

youcancallmekhen said:
Should I lock my bootloader sir?
Click to expand...
Click to collapse
Don't lock bootloader.
Download this https://drive.google.com/file/d/1jLdDz7M0G_KPDn4jXjTeuFnO1C-MFaBs/view (It is from A.87 UI 1.0 Stock ROM)
Extract above 7z file and flash ONLY super partition from it and TWRP from https://androidfilehost.com/?fid=7161016148664807816 with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery TWRP.img
fastboot reboot recovery
Now enable 'Skip Treble Compatibility error' in TWRP settings and flash stock ROM .ozip in TWRP.
Thanks

HemanthJabalpuri said:
Don't lock bootloader.
Download this https://sourceforge.net/projects/realmec11/files/Fastboot-ROM/[email protected]/download
Extract above 7z file and flash ONLY super partition from it with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery stock-recovery.img
fastboot reboot recovery
Now flash stock ROM .ozip in stock recovery.
Thanks
Click to expand...
Click to collapse
Oh my, thank you so much sir. You have no idea how much you are helping me sir! My parents will be so happy, and we won't waste money… Thank you so much sir…
I'll update you sir after doing these, thank you sir! ♥

HemanthJabalpuri said:
Don't lock bootloader.
Download this https://sourceforge.net/projects/realmec11/files/Fastboot-ROM/[email protected]/download
Extract above 7z file and flash ONLY super partition from it with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery stock-recovery.img
fastboot reboot recovery
Now flash stock ROM .ozip in stock recovery.
Thanks
Click to expand...
Click to collapse
I don't have much data left today sir, so I will download this later. Thank you very much again sir, you're my hero!

DFM23 said:
it has no sign of life, cant go to recovery or fastboot. when I connect it to pc it goes connect and disconnected.
Click to expand...
Click to collapse
Follow the guide and you can get your mobile back to life.
Thanks

HemanthJabalpuri said:
Follow the guide and you can get your mobile back to life.
Thanks
Click to expand...
Click to collapse
thank you bro, Ill follow your guide then. btw does the RMX2185 firmware you provided works with realme c12? I look it up and saw that it was for realme c11

DFM23 said:
thank you bro, Ill follow your guide then. btw does the RMX2185 firmware you provided works with realme c12? I look it up and saw that it was for realme c11
Click to expand...
Click to collapse
Yes, both use same firmware.

I tried the guide but when I click download on sp flash tool it would stay in red bar for 1 min or more then message will appear saying STATUS_EXT_RAM_EXCEPTION. I have read a same comment here in xda about realme c12 I dont know if its only on realme c12.

Thanks for your works sir, you are super awesome!

I rooted My Device (Realme X2 Pro) by Magisk. And Since My Device Bootloader was unlocked I Unrooted/Uninstalled MAgisk.
While Locking Bootloader My Device is Stuck where It displays { The Current Image (boot/recovery) have been destroyed dand cannot boot. Please flash the correct Image or Contact Customer Service to fix it }
While Trying to ENter the Fast Boot Mode {By pressing Volume + - and Power Button} Its Unresponsive
It shows Realme Logo And chrging Display for a Instant
Do you Know any way around to fix my Problem?

Bhuprab said:
I rooted My Device (Realme X2 Pro) by Magisk. And Since My Device Bootloader was unlocked I Unrooted/Uninstalled MAgisk.
While Locking Bootloader My Device is Stuck where It displays { The Current Image (boot/recovery) have been destroyed dand cannot boot. Please flash the correct Image or Contact Customer Service to fix it }
While Trying to ENter the Fast Boot Mode {By pressing Volume + - and Power Button} Its Unresponsive
It shows Realme Logo And chrging Display for a Instant
Do you Know any way around to fix my Problem?
Click to expand...
Click to collapse
Since your device is Qualcomm, I don't know. In any device, we have to flash stock rom (or atleast the partitions that are modified) to get device in working state.
You may get better help at https://forum.xda-developers.com/f/realme-x2-pro-questions-answers.9439/
Thanks

Redmi Note 7 Pro Bricked and bootloader is locked

Hi
My Redmi note 7 pro is bricked and it is in locked state .
I tried flashing fastboot rom from edl mode
But it gaves errors like
1) cannot receive hello packet
2)Only nop and sig tag can be recevied before authentication.
Please help me guys regarding this its been a while without my phone

AwesomeAman said:
Hi
My Redmi note 7 pro is bricked and it is in locked state .
I tried flashing fastboot rom from edl mode
But it gaves errors like
1) cannot receive hello packet
2)Only nop and sig tag can be recevied before authentication.
Please help me guys regarding this its been a while without my phone
Click to expand...
Click to collapse
Firstly, can you still boot into Fastboot mode? Secondly, you said you flash fastboot ROM from EDL, how you get into that EDL mode, and you're flashing by MiFlash right?
Clear the information, I might help you!

LinhBT said:
Firstly, can you still boot into Fastboot mode? Secondly, you said you flash fastboot ROM from EDL, how you get into that EDL mode, and you're flashing by MiFlash right?
Clear the information, I might help you!
Click to expand...
Click to collapse
Answers:
Yes it is going on fastboot mode
I got into edl mode by opening back Pannell of my device and i connected edl points
I am flashing via mi flash.
Actually in mi flash tool by mistake i flashed fastboot rom by selecting flash and lock.
Now when i flash the same by selecting clean all option by putting my device on edl mode
It show cannot receive hello packet.
This put me in this trouble

AwesomeAman said:
Answers:
Yes it is going on fastboot mode
I got into edl mode by opening back Pannell of my device and i connected edl points
I am flashing via mi flash.
Actually in mi flash tool by mistake i flashed fastboot rom by selecting flash and lock.
Now when i flash the same by selecting clean all option by putting my device on edl mode
It show cannot receive hello packet.
This put me in this trouble
Click to expand...
Click to collapse
Right, then you did the testpoint trick to get in EDL mode! Ofcourse now you can't use MiFlash with clean all to flash your device since your device is now in brick state. Only solution now is to find the factory images of your device, along with an authenticated prog file then use QFIL to force flash into device. You may inbox me if need further instructions!

i have the same issue pls help

LinhBT said:
Right, then you did the testpoint trick to get in EDL mode! Ofcourse now you can't use MiFlash with clean all to flash your device since your device is now in brick state. Only solution now is to find the factory images of your device, along with an authenticated prog file then use QFIL to force flash into device. You may inbox me if need further instructions!
Click to expand...
Click to collapse
Sir, I have exact same device and I am also stuck in edl mode. It looks there are no patched firehose files for violet. Is there any possible way you can help??

Redmi 9 hard brick, bootloop and CAN'T ACCESS FASTBOOT

I was trying to install TWRP using fast boot. At first I was using the usual commands,
fastboot flash recovery twrp.img
fastboot flash (some command) vbmeta vbmeta.img
and it would just boot directly into the system (twrp wouldn't work)
then I did it again but I added
fastboot flash misc misc.bin
And now my phone is stuck in a bootloop. Whatever I do it just goes to the Redmi logo screen, then turns off, and turns on again by itself. (I can't even turn it off)
I say this again: I cannot access fastboot. Is there a possible solution to this or is the phone gone for good? (OEM unlocking was unlocked, I'm sure of it)

Try to re-flash phone's Stock ROM.

xXx yYy said:
Try to re-flash phone's Stock ROM.
Click to expand...
Click to collapse
I can't access neither fastboot nor recovery, how do i do that?

Xiaomi MI Flash Tool can flash in fastboot mode or EDL mode. consider deep flash cable.
edit: misc partition is mediatek. erase misc partition from mtkclient

there is a (paid) Xiaomi Pro Tool v3.8 for mediatek on post #28

cross posted here (1)

aIecxs said:
Xiaomi MI Flash Tool can flash in fastboot mode or EDL mode. consider deep flash cable.
edit: misc partition is mediatek. erase misc partition from mtkclient
Click to expand...
Click to collapse
Thank you. I fixed it and flashed it with SP Flash Tool and a python script to bypass Xiaomi protection

Nuythe said:
Thank you. I fixed it and flashed it with SP Flash Tool and a python script to bypass Xiaomi protection
Click to expand...
Click to collapse
bro please provide steps plox

Nuythe said:
Thank you. I fixed it and flashed it with SP Flash Tool and a python script to bypass Xiaomi protection
Click to expand...
Click to collapse
I think I have the same problem after downgrading from 13.0.5 Miui 13 CN rom to 11.0.4 Miui 11 Global rom. Lolz
I'm already on the part where I can bypass but I can't proceed to downloading the firmware to my phone w/ SP flashtool because my Redmi 9 keeps on bootlooping everytime it connects
In your case, were you in point where you need to open the backcase of the phone so that you can manually remove the battery so that it doesn't keep on reconnecting during flashing?

sturzerblitz said:
I think I have the same problem after downgrading from 13.0.5 Miui 13 CN rom to 11.0.4 Miui 11 Global rom. Lolz
I'm already on the part where I can bypass but I can't proceed to downloading the firmware to my phone w/ SP flashtool because my Redmi 9 keeps on bootlooping everytime it connects
In your case, were you in point where you need to open the backcase of the phone so that you can manually remove the battery so that it doesn't keep on reconnecting during flashing?
Click to expand...
Click to collapse
The timing is a bit tricky. Just keep doing it, it'll eventually connect in the right time and stop bootlooping.

Nuythe said:
The timing is a bit tricky. Just keep doing it, it'll eventually connect in the right time and stop bootlooping.
Click to expand...
Click to collapse
Yep you're right! timing is essential, I actually have fixed it and not needed to open the back case to manually remove the battery. I just tried another port, waited until it stops bootlooping after the bypass and followed those succeeding steps again.
But...
After successfully flashing with my stock firmware and updating it to MIUI 12.5.6 Global. It seems the bootlooping wrecked the hell out of my battery and I'm always suffering with occasional reboots everytime I maxxed out the volume and whenever I tried to call. Seems my phone is getting weak current or battery supply, sucks.

Question How do I flash stock ROM with locked bootloader?

Hi guys,
so after I got my xiaomi with a global ROM and wanted to update and that is when I accidentally relocked the bootloader. The version of ROM was invalid apparently and wouldn't let me boot and now I'm stuck in fastboot mode.
My problem is as follows:
-can't enter recovery, stuck at fastboot no matter how many times I try and reboot
-adb not working since I didn't enable it
-bootloader locked (miflash says so and it can't unlock it since I didn't check 'oem unlock enable' and I cannot boot ROM so I can't enable it)
-fastboot flashing says 'not allowed in lock state'
-edl mode not available
I've seen tutorials where people opened their phones to force the phone into edl mode via the testing points but is that the only way`?
Any suggestions on how I could unbrick it?
Much appreciated

yes, it is the only way.

koniv90 said:
Hi guys,
Any suggestions on how I could unbrick it?
Much appreciated
Click to expand...
Click to collapse
you can use this tool to flash the phone on fastboot mode
Xiaomi King Tool - Home.
xiaomikingtool.com
its cost you only 5 credit

Can you flash files by fastboot? if so, flash the global rom images one by one, then reboot

I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.

eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
I need help please my phone redmi k50 gaming is no recovery and . bootloader is locked

eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me

This what I'm facing

Dims_Camper said:
yes, it is the only way.
Click to expand...
Click to collapse
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?

kskksks said:
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
Click to expand...
Click to collapse
Nope, only very old devices.

NOSS8 said:
Nope, only very old devices.
Click to expand...
Click to collapse
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode

kskksks said:
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
Click to expand...
Click to collapse
Have you tried to flash stock rom?
I mean, if you have Chinese rom before, just flash with latest Chinese rom.

Ghanaba said:
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
Click to expand...
Click to collapse
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one

jholfran3 said:
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
Click to expand...
Click to collapse
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro

flashing is possible with modified firehose programmer (no auth factory loader) or with authorized xiaomi account. both solutions are paid service and cannot advertised here.
please -as always- read the thread you posted in. I can see useful information shared already. wait for other replies.

letsgofly said:
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
Click to expand...
Click to collapse
Hi, try to flash the .img files from the fastboot stock rom whit cdm in fastboot, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
example:
fastboot flash boot boot.img
fastboot flash cust cust.img
etc.

jholfran3 said:
Hi, try to flash the .img files from the fastboot stock rom, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
Click to expand...
Click to collapse
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).

NOSS8 said:
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
Click to expand...
Click to collapse
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V

jholfran3 said:
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
Click to expand...
Click to collapse
To install a recovery, the bootloader must be unlocked.