Related
STOCK ROMS
ZUI 11.1.053
Target version: L78011_CN_OPEN_USER_Q00026.0_P_ZUI_11.1.053_ST_190731_qpst
basic version: ZUI_11.1.053
Size: 3.42gb
Link: https://mega.nz/file/YzwUTCwJ#j1v7lTO7Ivokgr2fkSnny5wB01nqCWm4TZu2hUK5xxE
ZUI 4.0.474
Target version: Lenovo_Z5_L78011_CN_OPEN_USER_Q00016.0_O_ZUI_4.0.474_ST_190118_QPST
basic version: ZUI_4.0.474
Size: 3.00gb
Link: https://drive.google.com/file/d/1F0VtbBfxoLdukGMytq8SslcWjqcsLABQ/view?usp=sharing
OFFICIAL ROMS & UPDATES
Target version: 10.5.306
basic version: 10.5.254
upgrade package size: 127.04 Mb & 3.36gb
View attachment 4773407
Applicable models: Lenovo Z5 (L78011)
Upgrade point of view
Support Unicom VoLTE;
Update Lenovo mobile phone customer service hotline number: 400-990-8888;
System Optimization
Fix the problem that the probability of the compass cannot be calibrated;
Fixed WeChat 7.0 avatar and received a message without a prompt tone;
Fix the problem that the HDR icon is also displayed under the HDR close finder frame;
Fix the problem of finding the mobile phone emergency contact does not support segment 166;
Fix the problem of flashback after clicking the QQ flashback after the end of the nighttime extreme power saving;
After the OTA upgrade is fixed, the default theme preview interface is different from other preview interfaces.
Fix the problem that the game volume function cannot be called up when the game voice function is enabled in the game interface;
Fix the problem that the three-letter X-Y-Z on the right side of the address book is manually clicked;
After repairing and unplugging the SD card formatted as internal storage, the "missing SD card device" notification cannot be clicked, causing the internal storage of the mobile phone to be unmounted;
Fix the different carrier card settings. After calling the main card, enter the contact - click any contact - long press the contact number to display the problem that the card 1 or card 2 operator call does not match the actual card location.
Precautions
Please make sure that the phone have a lot of power, power and storage space;
If you have problems with the upgrade, please go to the official Lenovo community for help.
The upgrade process may cause the phone to heat up or consume power for a short period of time. It is recommended that you restart the system again after the upgrade to obtain a stable experience.
DOWNLOAD LINK AFH Link : Chinese Web Link
Full ROM link (3.36GB):- Mega Drive
RETURN FROM CUSTOM to OFFICIAL ROM
Now returning to STOCK is possible
METHOD 1 (RESTORE TWRP BACKUP)
1. Download the TWRP back up of ZUI 4.0.474 from AFH & the Official ZUI 4.0.474
2. Unzip it (Its actually a 2.5 GB compressed file).
3. Now Boot into TWRP.
4. Now connect the mobile from PC and check the Root directory for TWRP>>BACKUPS
5. Make a new folder by name "cd6d6a03 ( change it with the name of your devices, can easily be checked via fastboot devices command) "
6. Put the extracted backup into that folder.
7. Wipe Dalvik,Cache and System.
8. Restore the backup. (Dont worry it will not BOOT your Z5)
9. Now POWER off the mobile.
10. Move to Qfill Mode (Press both VOLUME up+ Down and POwer button).
11. Connect to PC and Restore the Official Rom through QPST.
No more Sahara or Out of Memory error,........................ENJOY
METHOD 2 (TWRP FLASHABLE ROOTED ROM)
Download link: Mega Drive
Method to Flash this rom
Method 1:
1. Download the Zip package
2. Put it into SD Card
3. Boot into TWRP
4. Clear the Cache,Dalvik,Data & System.
5. Flash the package Normally
6. enjoy the Rooted Official PIE.
Method 2:
1. Download the package
2. Unzip it
3. Run the Flash.exe in given archive
4. Check the attachment to learn the Chinese exe meaning
5. enjoy the Rooted Official PIE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
METHOD 3 (FOR those who were on ZUI-10 & for going Back to ZUI 10)
Method back to Stock ZUI 10:
1: Flash Stock ZUI 10.5.254 via Qfil
2: Flash TWRP 10.5.254 via Fastboot
3: Flash this rom via Fastboot
Link: https://mirrors.lolinet.com/firmware/gsi/ZUI-AB-9-20190616-ErfanGSI.img.7z
4: Go to Twrp then wipe data. After wipe data choose Reboot System and wait 1 or 2 minutes.
(Your phone will stuck in Lenovo red logo).
5: Flash Stock ZUI 10.5.254 again via Qfil.
==you are completed back to ZUI 10.5.254==
OFFICIAL ROMS
10.5.254 [FINAL] for LENOVO Z5 Android P
ZUI version: 10.5.254
adapter model: L78011
Android version: 9.0
Brush type: QPST/DIRECT over 4.0.474
Compression package size: 3.36G
Package name: L78011_CN_OPEN_USER_Q00025.0_P_ZUI_10.5.254_ST_190404_qpst.zip
WHATS NEW
(fixed or changed issue with the previous one has been released Software comparison):
1. Add new application lock to support face unlocking mode;
2. Add U health camera to recognize calorie function;
3. New negative one-screen card display, support step counter / commute recommendation / fast payment, etc.;
4 New desktop editing mode, support more desktop layout, please press and hold on the desktop to enter the view;
5, the new control center and the notification bar are integrated, and support the desktop to slide out the global search;
6, the new U-touch gesture, Cut everything to turn on the flashlight and turn it around to turn on the camera, please check it in Settings->4D U-touch;
7. Fix the problem of background sound break of the game;
8. Fix the problem that the shutdown charge cannot be extinguished;
9. Repair the upgrade process phone stopped running problem of sporadic;
10, automatic optimization of backlight brightness curve, the backlight is too bright indoor solve the problem;
11, repair slip cut back on the desktop screen shot Small window interface stuck, unable to withdraw from the problem;
12, repair ultra-definition mode watching videos / landscape orientation games, even now question the status bar displays black bars;
13, is in the pocket repair mode, frequently light off screen calls Face Detecting problems that cause the phone to heat up;
14, repair power-saving mode / night power-saving open, even after a long standby, the APP can not access the Internet;
15, repair the call screen in the state of the call, press the power button to press the screen repeatedly, the caller animation does not display The problem;
16, repair even now through the fire line / gun warrior / stimulating the battlefield game interface screen brightness suddenly dimmed, the notification bar brightness adjustment is invalid.
Links credits to @ gfofanov
https://mega.nz/#!vuoA0SbJ!6HuGdtaNDV4XzNZbOeWB9fDiiP64kbcbo36_4j-8k-4
https://drive.google.com/file/d/10vJrO1-_-VdIV5rfhbYDuc6dUgxkoyjF/edit
New URLs:
https://mirrors.lolinet.com/firmware/lenovo/l78011/L78011_CN_OPEN_USER_Q00025.0_P_ZUI_10.5.254_ST_190404_qpst.zip
AND
https://office300-my.sharepoint.com/:u:/g/personal/fofanov_office300_onmicrosoft_com/EWzxvMBijR5Dk__iWz8RYuoB6rJ8jvNQjcdXts7J1UCQcg?e=pckW58
CUSTOM ROMS
MIUI
MIUI 10 [9.5.9] for LENOVO Z5 Android P Credits to Art Chen
Everything is working except Face Unlock
…….Images in attachment
https://mega.nz/#!YiB0XIJC!aykBuDqWxQWsbWc0kcNnBhtHy_5eqDO1Giw_avvj2WQ
MIUI 10 [9.3.14]17th March 2019 Update for LENOVO Z5 Android P Credits to Art Chen
his is already the third edition. @Art_Chen The author is still very diligent. Now I
have fixed the following problems:
Optimize the fluency of the system (the overall use is smoother, the gesture operation does not drop frames) to
improve the stability of the system (from Android 8.1 Upgraded to Android 9)
Fixed several bugs (fixed volte not available, aptX audio no sound, etc.)
https://drive.google.com/drive/folders/1NdveI-miKPs6RDf9yH9HIwDgJrkkWi5F
GDrive Link
MIUI 10 [9.2.21] for LENOVO Z5 Android P Credits to Art Chen
his is already the third edition. @Art_Chen The author is still very diligent. Now I
have fixed the following problems:
Optimize the fluency of the system (the overall use is smoother, the gesture operation does not drop frames) to
improve the stability of the system (from Android 8.1 Upgraded to Android 9)
Fixed several bugs (fixed volte not available, aptX audio no sound, etc.)
A small number of known bugs: fingerprint payment is not available (can be used with Tai Chi or Ed Xposed), there may be some bugs but I am temporarily
Didn't find Batterey Drain
Fix gps , theme , lockscreen wallpaper
If you are using miui, Update don't need to clear the data
DOWNLOAD:-
https://mega.nz/#!6rwQjA6B!z2xdnixiyCt5us6Cjeh9mIkgnqR4jnRLoiyZwt2Mink
BlueTooth Patch (Only if not working)
GDrive Link
MIUI 9.1.31 for LENOVO Z5 Android OREO Credits to Art Chen
Whats in this ZIP?
[attachment="15308074:miui.jpg"]
Download Link
Google Drive Link
BlueTooth Patch (Only if not working)
GDrive Link
BUGS:- No (If found Bluetooth issue use above given patch)
METHOD for FLASHING
1. Tools inside use them
2. OR use TWRP.
use at your own risk
Click to expand...
Click to collapse
PIXEL EXPERIENCE
* PE (10-05-2019): https://mega.nz/#!M65R0Qwa!OhxqBiOuU...cTXiQTTSIoGQdE
Bugs: Just Charging light else is clear
* PE (22-05-2019): https://mega.nz/#!9hxzBCjZ!QgoiTDZXOoAhHXDFWZ3GkBPrFPN2V7qlzLQt855ZLIw
Bugs: Just Charging light else is clear
* PE (06-06-2019): https://mega.nz/#!m3oVRaBY!KfFAG6mHiVsQCz2N1SixAHjg5GFaZbaRe-JO3Bz0CEg
Bugs: Just Charging light else is clear
* PE (18-06-2019): https://mega.nz/#!9xBD1AJB!atWWvl_0nXFXQxYT1gHjg9rzX6Kpqivtd7lawX_sEuw
Bugs: Just Charging light else is clear
************************************************************************
RESCRUSSION REMIX
* RR (16-04-2019): https://mega.nz/#!43hRxYJR!hwKWkOt3S...auq-EXSu7IrN8s
Bugs: Just Charging light else is clear
* RR (24-05-2019): https://www.androidfilehost.com/?fid=6006931924117883160
Bugs: Just Charging light else is clear
* RR (15-06-2019): https://drive.google.com/open?id=1p3d-itVhjkI4TdDZLzQSewHPAin6Y3R_
Bugs: Just Charging light else is clear
************************************************************************
HAVOC-OFFICIAL (No GApps)
Havoc-OS v2.6 Official Build (Credits to developer)
What's New (google translator):
* Added double tap for wake-up (must be supported by device / kernel)
* Added call recording to Dialer
* Added toggle switch for A -GPS
* Reduced minimum brightness
* Mi9 / Mi9SE fingerprints re-added to display (FOD)
* Added overlay (see OP) to enable cutout controller (hide label, ...)
* HAVOC (12-06-2019): Download Link
USEFUL BEFORE INSTLLATION
1. use 3.2.3 TWRP recovery for 4.0.474 (Link Here)
2. Flashed the same Boot Image on Partition A & B. (Boot + Vendor Image)
3. Than the Same Vendor Image.
FLASHING PROCEDURE
1 . Download TWR.img ( only single file now dont worry ) copy in one folder
2. connect phone to pc boot your phone to download mode
3. open cmd in that folder
4. type adb devices
5. type fastboot boot twrp.img for temporary if you want permenant fastboot flash boot twrp.img
6. fastboot reboot
7. now wipe everything
8. now flash the rom
9. remeber if you are on slot a rom will install on slot b and press reboot to recovery again after installing rom and now switch to slot b and select reboot system now your phone boots to slot b
10. if you are on slot b rom will install on slot a and press reboot to recovery again after installing rom and now switch to slot a and select reboot system now your phone boots to slot a
11. congratulations .
OTHERS/BETAs
10.5.254 [BETA 5] for LENOVO Z5 still BETA Android P
Applicable models: Lenovo Z5 (L78011)
Target version: 10.5.254 or higher
Basic version: 4.0.474/10.5.223
Upgrade package size: 90 Mb almost
push status: Public
following is the update content of 253 version.
will share Later
Download Links:- G-Drive credits to @M.Z.F
10.5.248 [BETA 4] for LENOVO Z5 still BETA Android P
Applicable models: Lenovo Z5 (L78011)
Target version: 10.5.248 or higher
Basic version: 4.0.474/10.5.223
Upgrade package size: 140 Mb
push status: Grayscale push
following is the update content of 248 version.
Fix the problem of background sound break of the game;
fix the problem that the shutdown charge cannot be extinguished;
fix the problem that the occasional phone stops running during the upgrade process;
fix the post-upgrade settings -> display And the problem of no brightness mode;
fix the problem that the camera menu is hidden after the top of the screen is displayed;
optimize the automatic brightness backlight curve to solve the problem of over-brightness in the room;
repair the activation of the overseas Internet, prompt to select the data master Card problem;
fix super clear mode to watch video, horizontal screen game, occasional status bar shows black bar problem;
repair connection Bluetooth After the headset dials the WeChat voice/video call, both sides have silent problems;
fix the called call in the lock screen state, press the power button multiple times to turn off the screen, the caller animation does not display the problem.
Download Links:- CloudMail credits to @gfofanov
ZUI 10.5.23 [BETA 3] for LENOVO Z5 still BETA Android P
Applicable models: Lenovo Z5 (L78011)
Target version: 10.5.230 or higher
Basic version: 4.0.474/10.5.223
Upgrade package size: 1.49 Gb
push status: Grayscale push
Upgrade the point of view
Upgrade Android 9.0 system;
new face recognition solution, need to re-enter facial information in settings -> password, fingerprint and face recognition;
new ZUI10 design style, add 4D U-touch gestures, magic input box, small window broadcast Video and other functions;
system optimization
New nighttime extreme power saving;
new application lock to support face unlocking mode;
new U health camera recognition calorie function;
new negative one-screen card display, support for step/off-work advice/fast payment, etc. ;
new desktop editing mode, support more desktop layout, please see the press to enter the desktop long;
the new control center and notification bar integration, and support on the desktop slide to bring up the global search;
new U-touch gestures, cut everything open flashlight Turn the camera on and turn it around, check in Settings -> 4D U-touch.
Download Links:- CloudMail - : - Mega
ZUI 10 (ported) for LENOVO Z5 Android OREO Credits to Ketai
I understand from guglotransleyta (but it's not exact):
Launcher 5.0 http://4pda.ru/pages/go/?u=https://...LrMKEhvRh0DVNwjccXmsIS3sCBb_AOCAvE&e=81841256
launcher 10.0 http://4pda.ru/pages/go/?u=https://...Dcu3z8zrAdTFCAiIopeOpKnjyf70vI7wYw&e=81841256
Firmware 3.9.075 https%3A%2F%2Fyadi.sk%2Fd%2FHHqqn2P73Zkmpn&e=75597985 (Password for archive: w3bsit3-dns.com)
Firmware 5.0 http://4pda.ru/pages/go/?u=https://...0cO7LPUOMAgwBrhHEyl8ofGvCycokfHbZU&e=81841256
Firmware 10.0 http://4pda.ru/pages/go/?u=https://...0pyMvNo3ckYJSnNm5Hdyqtrwh2NDbF6FCg&e=81841256
As I understand it, there should be 075 with the unlocking bootloader.
Those. The boot-loader is unlocked, debugging is enabled, then into the fastboot and we sew, the batch file in Chinese is full.
Steps:
1. Flash 3.9.075 via QPST (if you already have 3.9.075 leave this step)
2. Unlock Bootloader.
3. Flash TWRP.
4. Flash ZUI 5.
5. Flash ZUI 10
DONE!
BUGS:- None till now
Everything is at your own risk, I did not set myself.
Some link was such a translate in
https: //club.lenovo.co...hread-5412231-1-1.html
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON
How to FLASH MIUI/OTHER ROMS?
Always make a backup first. and copy the rom in your mobile
1. Boot into TWRP (means you must have bootloader unlocked and only 3.9.075 & 3.9.500 are capable to unlock bootloader)
2. Now in TWRP wipe the cache and dalvik with system
3. (a). Switch to IMG mode in TWRP.
(b). There are 3 image files in the downloaded ZIP folder named as images ( patched_boot,System & Vendor)
4. first flash System, than Vendor and last patch.
5. Done & REBOOT (it might said no ROM installed ignore it.
MIUI 10 is the only rom after flashing it you can go back to stock.
How to FLASH OFFICIAL ZUI 10.5.230?
1. Download
2. Upload to the root of the root memory
3. Rename the package to update.zip
4. Update it in 3 dots above in the official update application.
--------------------------------------------------------------------------------------------------------
wana GO BACK to STOCK from CUSTOM? Follow this post
TWRP for PIE? Follow this post
--------------------------------------------------------------------------------------------------------
Problems & There Solutions.
1. Have you ever get annoying thing like Insufficient storage to flash. Well today, for A/B device, we have got a the great guide for you!
http://oxygenosguide.lunarixus.party
* Notes that re-partitioning your device may cause the damages to your device. Do at your own risk!
* DO NOT TRY ON MOTO DEVICE!
Register your devices at this link to get the Z5 stable updates early than others
https://www.wjx.top/m/25027506.aspx
25-03-2019 : Update Official PIE ZUI 10.5.230 added
29-03-2019 : Update Official PIE ZUI 10.5.248 added
11-04-2019 : Update Official PIE ZUI 10.5.254 added
17-04-2019 : MIUI 10 [9.3.14] 17th March 2019 Update for LENOVO Z5 added
09-05-2019 : MIUI 10 [9.5.9] 9th May 2019 Update for LENOVO Z5 added
17-05-2019 : PE & RR [9.3.14] April & May updates Update for LENOVO Z5 added
19-05-2019 : Link for RETURNing FROM CUSTOM to OFFICIAL ROM added.
20-05-2019 : Link for backup of OFFCIAL ROM via TWRP added.
30-05-2019 : Link for RR update added.
08-06-2019 : Uploaded the official 10.5.306
14-06-2019 : Uploaded PE new Update.
15-06-2019 : Uploaded PE new Update.
16-06-2019 : Uploaded HAVOC OS official for Z5.
17-06-2019 : New Method for Returning to STOCK ZUI-10 added.(FOR those who were on ZUI-10 & for going Back to ZUI 10)
22-06-2019 : Uploaded 10.5.306 official full ROM for Z5.
23-06-2019 : Uploaded PixelExperience update for Z5.
30-05-2020 : Uploaded Stock Rom ZUI_4.0.4.74 update for Z5.
Miui
M.Z.F said:
Reserved
Click to expand...
Click to collapse
Miui rom is chinese rom. I wanna EU Rom. Please update EU Rom
1}
FLYME 7 for LENOVO Z5 Android OREO
will be posted later
.........
= When is FlyMe available?
2}
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON.............
= How do you know this and When is it officialy coming out?
3}
Do you have some screenshots of this Zui 10?
xperia_bird said:
1}
FLYME 7 for LENOVO Z5 Android OREO
will be posted later
.........
= When is FlyMe available?
2}
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON.............
= How do you know this and When is it officialy coming out?
3}
Do you have some screenshots of this Zui 10?
Click to expand...
Click to collapse
yes Flyme is vailable but very buggy thats why did not share over here.
xperia_bird said:
1}
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON.............
= How do you know this and When is it officialy coming out?
Click to expand...
Click to collapse
Beta Testing is in progress for official 9.
M.Z.F said:
Beta Testing is in progress for official 9.
Click to expand...
Click to collapse
Thats great! Can you give a timeline?
This custom ROM, is it also valid for the Lenovo Z5s L78071?
Wait for final release Pie.
hi,
is miui rom multi language rom?
raccoon616 said:
This custom ROM, is it also valid for the Lenovo Z5s L78071?
Click to expand...
Click to collapse
Noo
xperia_bird said:
These are not flashable ZIP files, you need to flash this with Fastboot. Please put this in your post, at least how to flash the files in the right way. Also the batch file in the ZIP is not readable by cmd.
I tryed your flashing steps and now the phone is not booting.
Click to expand...
Click to collapse
check OP
erdogan69 said:
hi,
is miui rom multi language rom?
Click to expand...
Click to collapse
Only CHINESE & ENGLISH
this is awesome MZF, can i use your download links in this thread ? I need to create a tutorial for going back to stock.
https://forum.xda-developers.com/pr...-how-to-flash-android-8-1-9-0-t3840839/page87
rendroid15 said:
this is awesome MZF, can i use your download links in this thread ? I need to create a tutorial for going back to stock.
https://forum.xda-developers.com/pr...-how-to-flash-android-8-1-9-0-t3840839/page87
Click to expand...
Click to collapse
For sure
MIUI 10 is the only rom after flashing it you can go back to stock. (Personally tested)
M.Z.F said:
For sure
MIUI 10 is the only rom after flashing it you can go back to stock. (Personally tested)
Click to expand...
Click to collapse
thank you for your work.
i tested first with zui5 and then zui10 they both booted successfully, the only problem i am facing is that vendor and persist doesnt mount, hence mobile network and wifi is not available, and you cant move past the activation screen, so i am working on that
it looks like it is not being mounted because of encryption, so i am force mounting it by flashing it in twrp.
I can't copy MUIU file to internal storage, it says file limit larger than device limit ?
It's more than 4gb
I am on Pie 9. Is that true if i flash MIUI 10, then using QFIL to flash stock Rom, and i can go back to stock???
creedsbg said:
I can't copy MUIU file to internal storage, it says file limit larger than device limit ?
It's more than 4gb
Click to expand...
Click to collapse
Copy it on usb or mmc or format your device on NTFS format FAT file system dosbnot support larger files.
vosathanh said:
I am on Pie 9. Is that true if i flash MIUI 10, then using QFIL to flash stock Rom, and i can go back to stock???
Click to expand...
Click to collapse
i did it and i was a lucky man. :good:
Hi guys today will show you how to download Havoc-OS-v3.7 rom (GSI) with android Q on Lenovo K9 (L30843).
Download first TWRP: https://mega.nz/file/tFcm1IYb#nN6H210DoyYqjL0WEnI-I9skClDPEO0gl82H5My-gq4
If you have not unlocked the bootloader: https://www.howtoapps.info/how-to-un...der-lenovo-k9/
Link to Havoc-OS-v3.7 : https://mega.nz/file/FpUXjaCK#4ov2OL4Dr2DD0YEKrrR1jbtEr6KFX5GkesoJpdJTids
Step One: Go to TWRP. If you have internal memory (0mb), go to wipe / advanced wipe / mark data / fix or change file system / change system to Flie / EXT4 and you're done.
I recommend you keep your ROM on sd card without having thousands of quarrels.
Second step: Go to micro sd card / install image / swipe to flash your Havoc-OS-v3.7-20200709-Official-GApps-arm64-aonly.img / highlight system image / drag to confirm flash
Third step: This is a very important file, without it the system will not boot: https://drive.google.com/file/d/1nMXPYZ__TUgJKUo_72xzYnf-Ac1PXp-_/view?usp=share_link
Install zip / highlight Start_Trable / swipe to confirm flash / reboot system now
The ROM is left without a logo, shows its original Lenovo logo and after a while the orange status labels are removed and the android logo appears.
Please indicate below in the comments if there are any errors!
The Lenovo K9 forum has been renewed. I apologize for my poor English.
Any bugs? How can i contact you bro?
The Best Gamer said:
Hello guys today i will show you how to download Aosp rom (GSI) with android Q on Lenovo K9 (L30843).
Download TWRP first: https://mega.nz/file/tFcm1IYb#nN6H210DoyYqjL0WEnI-I9skClDPEO0gl82H5My-gq4
if you have not unlocked the bootloader: https://www.howtoapps.info/how-to-un...der-lenovo-k9/
Aosp Android 10 rom link: https://mega.nz/file/wQcn0YIT#emTFkJvSteK0jya2JuunBnZ9YBKt_an0-mXpKV1BpEM
First step: Go to the TWRP.If you have internal storage (0mb),Go to wipe/advanced wipe/mark data/repair or change file system/change flie system/EXT4 and you're done
I recommend you save your rom to sd card not have thousands of quarrels
Second step: Go to micro sd card/install image/your recorded aosp rom/mark system image/slipe to confirm flash
Third step: This is a very important file, without it the system will not start: https://mega.nz/file/dJcxiADQ#_iSoctWQ36K1JL3t9qGP0I_HwuHd43iC6e-0TbwZOKA
Install zip/mark Start_Trable/swipe to confirm flash/reboot system now
the rom leaves without a logo,shows its original logo of Lenovo,And after a while the inscriptions orange state are removed and the android logo appeared.
Mention below in the comments if there are bugs!
Click to expand...
Click to collapse
your flash rom not working on lenovo k9 my telephone is destroyed!!!!!!!!!!!!! remove flash rom thanks
drahomsky.d said:
вашият флаш ROM не работи на lenovo k9, телефонът ми е унищожен!!!!!!!!!!!!! премахнете флаш ROM, благодарение
Click to expand...
Click to collapse
Sorry friend! Flash Stock Rom on Lenovo K9 and the problem will be solved.
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
Download the latest version here
Bro I flashed your room via adb and facing minor display issue like whenever I'm typing something it's only show in keyboard and the screen full blank and another issue is WiFi not turning on
Welcome to POCO F1 Ultimate Collection!
(beryllium)
OFFICIAL STOCK MIUI ROM
You can check my Guides for installation.
Recovery ROM V12.0.3.0.QEJMIXM
Fastboot ROM V12.0.3.0.QEJMIXM
POCO F1 Global Stable ROM Library / POCO F1 MIUI Official ROMs Archive
FIRMWARE & VENDOR
POCO F1 Firmware
POCO F1 Vendor
POCO F1 Latest Firmware & Vendor
CUSTOM ROMS
You can check my Guides for installation.
Note: I've created an award system for people which are not familiar with custom ROMs, to help them choose a ROM which is stable for daily use, gets frequently updates with security patches every month and has active development, so they don't mess with ROMs which appearing and then dissapearing (and we have a lot of them).
ROMs under awarded ROMs are not order by rating and just have random order.
If you are knowledge, you can ignore my awards and choose any ROM you like.
My standards for giving award to a ROM are:
Open Source
Stable enough for daily use
SELinux Enforcing
Safetynet pass by default
Encrypted by default
Debloated
Active & Stable Development
Translations
Popularity
OTA
No Pixel Thermals
What is System_EXT? Check out here.
Based on MIUI ROM
MIUI MindEdition
MIUI 13 MindEdition A12 Unofficial
PocoOS
MIUI 14
BeosXPredator
Xiaomi.eu V12.0.3.0.QEJMIXM
Elite ROM
MIUI 12 Global Stable Modiefied
Linux Distribution
Ubuntu Touch
Droidian Unofficial
Android 13
crDroid [Installation Guide] [crDroid Recovery]
AwakenOS [Installation Guide] [TWRP by REIGNZ Recovery]
Official LineageOS / LineageOS microG [Installation Guide] [LineageOS Recovery]
PixelOS [Same as AwakenOS Installation Guide] [TWRP by REIGNZ Recovery]
ArrowOS [Same as AwakenOS Installation Guide] [TWRP by REIGNZ Recovery]
Paranoid Android / Unofficial PA [Same as AwakenOS Installation Guide] [TWRP by REIGNZ Recovery]
ReloadedOS [Same as AwakenOS Installation Guide] [TWRP by REIGNZ Recovery]
BaikalOS
SOSP-OS Project
Pixel Experience Unofficial
StatiXOS
Project Elixir
ArrowOS-MiPA Edition
EvolutionX
Project 404
DerpFest
LessAOSP
DivestOS
PixelExtended
CalyxOS
LibreMobileOS
CorvusOS
Project Blaze
BananaDroid
PixelPlusUI
BlissROM
Nusantara
riceDroid
Xtended
ColtOS
VoidUI
Black Iron
AncientOS
StagOS
SparkOS
AlphaDroid
SuperiorOS
ProtonPlus
CygnusOS
VoltageOS
CherishOS
xdroidOSS
EternityOS
Android 12/12L
Android 12L/12.1
crDroid [Installation Guide] [crDroid Recovery]
AwakenOS [Installation Guide] [TWRP by REIGNZ Recovery]
Official LineageOS / LineageOS microG [Same as crDroid Installation Guide but use LineageOS ROM / Recovery] [LineageOS Recovery]
Pixel Experience [Installation Guide] [PE Recovery]
ProtonAOSP
Paranoid Android
PixelOS
LibreMobileOS
CalyxOS
riceDroid
FluidOS
Project404
ForkLineageOS
Project Elixir
ArrowOS Unofficial
CorvusOS
EvolutionX
/e/OS
DerpFest
SyberiaOS
BiancaProject
VoidUI
LineageOS++ by side
CherishOS
SparkOS
StagOS
CygnusOS
AtomXCLO
FlamingoOS
KomodoOS
CipherOS
Nusantara Project
AncientOS
PixyOS
xDroid
LessAOSP
LeOS
VoltageOS
Kaleidoscope
ElytraOS
KryptonAOSP
Project Zephyrus
Project Arcana
ProjectBlaze
FusionOS
POSP
PixelBlaster
Android 12
MSM Xtended
PixelPlusUI
Project Radiant
BlissROM
CAFEX
SuperiorOS
Fluid
AOSPK
OctaviOS Unofficial
AospExtended Unofficial
Android 11
LineageOS / LineageOS microG
Pixel Experience
crDroid Android
ArrowOS
HavocOS
BaikalOS
EvolutionX
DotOS
AICP
Fork LineageOS
CalyxOS
/e/OS
AospExtended
PixelPlusUI
Paranoid Android
MSM Xtended
WaveOS
RohieOS
Project 404
BlissROM
CAFEX
xdroidCAF
DerpFest
BananaDroid
RevengeOS
AOSiP
ShapeShiftOS
Fluid
AwakenOS
POSP
PixelROM
SpiceOS
Styx Project
Project Sakura
StagOS
ArcaneOS
Syberia
TenX-OS
StatixOS
ColtOS
CherishOS
CesiumOS
Bootleggers
AOSPK
KangOS
ReloadedOS
CygnusOS
CesiumOS
Candy 11
AncientOS
OctaviOS
Nusantara Project
ConquerOS
HornbillOS
HyconOS
Android 10
Pixel Experience
LineageOS
crDroid
ReloadedOS
EvolutionX
Paranoid Android
CorvusOS
HavocOS / HavocOS Fan Build
ArrowOS
KeepQassa
CarbonROM
AOSiP
PixelROM
PixelDust
POSP
Ressurection Remix
MSM Xtended
AICP
OmniROM
CAFEX
DeepFest
NitrogenOS
Komodo OS
PixysOS
BlissROM
ColtOS
SuperiorOS
HornbillOS
ZenX OS
StagOS
NusantaraProject / Unofficial NusantaraProject
Project Sakura
CUSTOM KERNELS
What is System_EXT? Check out here.
Active Development
SilverCore Kernel
No Gravity Kernel [NGK Profiles -> Infos about Profiles]
Kawaii Kernel
Ingenium Kernel
Rockstar Kernel
EOL (Archived)
BAALAM Kernel
Gear Kernel
NexusCAF Kernel
Optimus Drunk Kernel
Franco Kernel
arter97 Kernel
Twisted Kernel
Illusion Kernel
Sphinx Kernel
Stealth Kernel
MiPa Kernel
MiPa Kernel
Canting Kernel
Delta Kernel
Seshstation Kernel
XDKernel
Simple Kernel
Parallax Kernel
Malakas Kernel
CUSTOM RECOVERIES
You can check my Guides for installation.
What is System_EXT? Check out here.
Unofficial TWRP Recovery by REIGNZ (Normal version= system_ext / NSE version=Non system_ext) [Telegram Support] [Current Bugs/Issues]
Official TWRP Recovery
LineageOS Recovery
crDroid Recovery
Pixel Experience Recovery
Dynamic Retrofit Recovery
OrangeFox Recovery
PitchBlack Recovery
Sky Hawk Recovery Project
GAPPS & microG
GApps
Note: be sure you have selected Platform: ARM64 and the proper Android version of the ROM you are going to flash. If the ROM you want to flash include GApps, no need to download and flash any GApps at all.
Most of the GApps have also a config. file which can be used to to configure your installation the way you like. You can skip any Package that you don't want to be part of your installation. For more infos about that, read the instructions of the GApps you chose or search in Google.
Retrial-NikGApps
NikGApps [Create your own NikGApps build -> Video Guide] [Guide for Packages Information/Description]
BiTGApps
MindTheGapps
FlameGApps [FlameGApps Config] [FlameGApps A13 Basic]
Open GApps / Open GApps Unofficial A12L
LiteGapps
microG
If you don't want to use Google Play Services and general move away from Google, microG and its variants is an open source alternative which replace these services.
NanoDroid
MinMicroG
BiTGApps microG
microG Revived
microG
MAGISK ROOT
You can check my Guides for installation.
Magisk (APK)
Magisk.zip (Flashable Zip)
Uninstall.zip (Flashable Zip)
Magisk Canary (APK)
Magisk Delta
FoxMagiskModuleManager (This app replace the official magisk module repository since no longer available)
Momo (You can use this app too check if any modifications related Magisk are detected or not)
Universal SafetyNet Fix by kdrag0n [Video Guide]
Shamiko (Hide Root from apps) [Guide]
Note: If your apps detect root, follow this Guide (or this) to pass SafetyNet and have certified Play Store. [YouTube Video Guide]
DISABE FORCE ENCRYPTION (DFE) & ENCRYPTION
You can check my Guides to find for what is used for.
Disable Force Encryption A13 (DFE A13)
Disable Force Encryption (DFE)
Encrypt Data
GOOGLE CAMERA PORTS & UNIVERSAL STOCK CAMERA UNINSTALLER & ANXCAMERA
Note: You can use 2 or more different GCams by installing GCams with different package names.
For example you can use Sanity's v9.6 ENG and BSG v8.1 MGC or Parrot etc... and vice versa.
That way you will have a stable GCam which everything works (Sanity's), but you can also have a latest version of GCam for features that v9.6 of Sanity's doesn't have, like astro mode etc.
Read the FAQ.
Poco F1 Photography: Telegram Group
san1ty
Parrot043
BSG (Public Version) [Video Stabilization Settings]
BSG (Private Version) [XML Configs] [Video Review]
Parrot043 (7.0.009_FinalBuildGoodbye_V1) / Settings (Apply the settings of this thread)
GoogleCameraMod07062019_xiaomi-sdm845 (Old 9.6 PE Default GCam)
ANXCamera (Magisk Module - No Addon needed)
Universal Stock Camera Uninstaller (Flash it in Recovery)
Note: If you updated GcamGo from the Play Store, you will need to flash this file and manually uninstall GcamGo from the app info.
GOOGLE PLAY SYSTEM UPDATE 🛡
You can manually update Google Play System by downloading and installing Main components.
ULTIMATE COLLECTIONS & GUIDES (APPS)
Check the Privacy & Security section in my Guides.
If for some reason you can't find/install an app on Google Play Store due country restrictions or anything, you can sideload the app from APKMirror.
Android Ultimate Collection & Guides
Windows Ultimate Collection & Guides
ReVanced & ReVanced Extended - Guides & Useful Links
UNIVERSAL ANDROID DEBLOATER
Universal Android Debloater
XIAOMI TOOLS
Mi Unlock
Xiaomi Mi Flash Tool
Xiaomi ADB/Fastboot Tools
Fastboot Drivers
Persist Partition (beryllium)
MINIMAL ADB AND FASTBOOT
Minimal ADB and Fastboot
ADB & Fastboot++
Fastboot Drivers
AMD RYZEN/INTEL FASTBOOT FIX
Check the AMD Ryzen Fastboot Fix Guide for the proper steps.
AMD Ryzen/Intel Fastboot Fix (Batch File .bat)
Fastboot Drivers
POCO F1 COLLECTION MIRROR
POCO F1 Collection AFH Mirror
HALL OF FAME OF DEVELOPERS
This section is to honor and support the developers who contribute to keep alive our device with active development over the years and they continue doing it.
This is also a kind of motivation for new or juniors devs to join the Hall of Fame of Developers.
By supporting the Devs not only is helpful for them but also for the community itself.
bgcngm
REIGNZ3
gwolfu
Pierre2324
Scroll Down to check the Guides
POCO F1 Ultimate Guides!
(beryllium)
!DISCLAIMER!
Most people I know (including myself) who used my Guides and steps, did that with success many times. If you don't follow exactly the steps or you do a mistake during the process, I do not take any responsibility for any unexpected results or damage that may happen. However I am here to help if something goes wrong, just ask in the thread.
AMD RYZEN/INTEL FASTBOOT FIX
Some AMD Ryzen or Intel Systems may have problems to recognize your device in fastboot. Try the following ways:
1. Install Fastboot Drivers (Extract the folder for windows 10) at Device Manager while your device is connected in Fastboot mode.
2. Download this .bat file (unzip it) or manually create a .bat file with these lines below, and run it as an administrator, then reboot:
Code:
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "osvc" /t REG_BINARY /d "0000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipContainerIdQuery" /t REG_BINARY /d "01000000" /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\18D1D00D0100" /v "SkipBOSDescriptorQuery" /t REG_BINARY /d "01000000" /f
3. Enable USB Debugging at device (Settings > Additional settings > Developer options > USB Debugging) and give authorization after connecting it to PC.
4. Use USB Hub.
5. Use USB Type-A 2.0.
6. Install AMD Ryzen Chipset Drivers or Intel Chipset Drivers.
Check the steps an another user did to make it work here.
If this doesn't help, unfortunately you have to use Intel System which is more likely to work.
UNLOCK BOOTLOADER
Note: Some AMD Ryzen Systems may have problems to recognize your device in fastboot. [Read the AMD Fastboot Fix Guide above]
Please keep in mind by Unlocking Bootloader the device will reset and all your data will be lost. Make a backup of your data first to PC or to USB.
1. Create a Mi account on Xiaomi’s website.
2. Add a phone number to your Mi account.
3. Insert a SIM into your phone (If you haven't added already). [Do not insert 2 SIM, only 1 until the Bootloader is unlocked. If you have 2 SIM into your phone, remove 1 and reboot.]
4. Enable developer options in Settings > About Phone by repeatedly tapping (7 times) on MIUI Version.
5. Link the device to your Mi account in Settings > Additional settings > Developer options > Mi Unlock status. Also enable USB Debugging.
6. Download the Mi Unlock app (Windows is required to run the app).
7. Run the Mi Unlock app and follow the instructions provided by the app.
8. Reboot your device into Fastboot mode. For that simply turn off your device, press the Power Button + Volume Down (–) button at the same time. Then connect the device to the Windows PC/laptop via a micro USB cable.
9. After device and Mi account are successfully verified, the Bootloader should be Unlocked and your device will restart by itself.
INSTALL CUSTOM RECOVERY
Fastboot Method (No Custom Recovery currently installed)
Note: Some AMD Ryzen Systems may have problems to recognize your device in fastboot. [Read the AMD Fastboot Fix Guide above]
1. Make sure your Bootloader is Unlocked.
2. Enable developer options in Settings > About Phone by repeatedly tapping (7 times) on MIUI Version.
3. Enable USB Debugging in Settings > Additional settings > Developer options > USB Debugging.
4. Download a custom recovery of your choice and copy the .img to your Internal Storage or to SDCard. [You can find a recovery of your choice in my Collection]
5. Download the portable Minimal ADB and Fastboot and run cmd.exe
6. Reboot to Fastboot mode by pressing Power Button + Volume Down (–) and keep holding both buttons until the word “FASTBOOT” appears on the screen, then release.
7. Once the device is in Fastboot mode, connect your device to PC and verify you can find it by typying in cmd: fastboot devices.
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example:
Code:
fastboot boot C:\Users\Retrial\Desktop\twrp-beryllium-v3.7.0-A12-V2.img
9. Now into TWRP, press Install > Install Image > Locate & Select the twrp.img you previously downloaded and copied from PC into your Internal Storage or to your SDcard > Choose Recovery and Flash!
10. Go back into Home page of TWRP and press Reboot to Recovery or manually by holding Power Button + Volume Up (+) until you boot to Recovery.
11. Done! You now have a new Custom Recovery installed.
Recovery Method (Custom Recovery already installed or booted)
1. Download a custom recovery of your choice. [You can find a recovery of your choice in my Collection]
2. Reboot to Recovery by holding Power Button + Volume Up (+).
3. Press Install > Install Image.
4. Locate the recovery.img you recently downloaded.
5. Select it and choose the option Recovery and Flash.
6. Go back and Reboot to Recovery.
7. Done! Your new recovery should be installed.
CLEAN INSTALL CUSTOM ROM
Note: If you have issues after flash check possible solutions here:
Check integrity of all downloads (compare checksums), do the downloads again.
Make sure you Wiped everything and Formated Data (format data not just wipe) except external SDCard and USB OTG.
Flash only the ROM (without GApps and Magisk) and check if the problem persists. If yes, flash another ROM.
Try other GApps package.
If nothing helps, go back to stock and start from scratch.
Note: You can also Flash Custom ROM using ADB sideload Method.
What is System_EXT? Check out here.
You can also do the same steps below to install Stock MIUI Recovery ROM.
1. Backup all your data to PC or to external SDCard. [All your data into Internal Storage will be lost on step 7 while Formating Data or Wiping Internal Storage]
2. Unlock Bootloader. [Read the Unlock Bootloader Guide above]
3. Download: [You can find everything in my Collection]
Custom Recovery of your choice. [Recommened to use Unofficial TWRP by REIGNZ3 (A12_System_Ext) for A12L+ ROMs]
Custom ROM of your choice.
GApps (be sure you have selected Platform: ARMx64 and the proper Android version of the ROM you are going to flash) if the ROM you are going to flash does not include. [Optional]
Magisk Root. [Optional]
Disable Force Encryption or Encryption. [Optional] (Read DFE & Encryption Guide above)
4. Move all these files in one folder to your PC or to External SDCard if you have one.
5. Install Custom Recovery. [Read the Install Custom Recovery Guide above]
6. Reboot to Recovery Power Button + Volume Up (+)
7. Installation:
Steps without external SDCard:
Select Wipe > Advanced Wipe
Select Dalvik / ART Cache, System, System_Ext, Data, Internal Storage, Vendor, Cache and then Swipe to Wipe. [All your data into Internal Storage will be lost]
Go back > Press Reboot > Reboot to Recovery again. [That step needed for the next step of formating the data because TWRP by REIGNZ have issue]
Go back and select Wipe > Format Data > type yes [All your data into Internal Storage will be lost]
Connect your device to PC while you are on TWRP and transfer into Internal Storage, the ROM, GApps etc. and the files you want to flash.
Flash ROM > GApps [Optional]
[Optional] Mount Vendor and Flash DFE [Optional - Not Recommended] or Encryption [Optional] (Read DFE & Encryption Guide above)
Reboot Enjoy!
[Optional] If you want to root, reboot once again to TWRP Recovery and flash Magisk then reboot to system and enjoy!
Steps with external SDCard:
go to Advanced > File Manager > External_SD and delete all folders in ur ext sd card (For example you should delete: Android, .android_secure, LOST.DIR, DCIM, etc) except your personal files/folders and the folder with your custom ROM/Gapps/Magisk/DFE or Encryption you want to flash.
Each app on your phone with the WRITE_EXTERNAL_STORAGE permission may create files or folders in ur sdcard. Most of these folders have once been created by one of these apps and many of them may be deleted with a few exceptions (e.g. Android, .data, .android_secure, these contain important system or app data like a game's downloaded content):
.android_secure: apps installed and then moved to sdcard
Android: app data/cache
data: app data
.estrongs: ES file manager
LOST.DIR: sort of trash folder (collects recovered files after phone crashes)
DCIM: phone gallery's photos and previews
OTA-update: Over The Air update service
ppy_cross: an unknown third-party app's data.
So I recommend to delete them so you can put your phone/sdcard in a clean state and is guaranteed to be able to re-create these folders.
Select Advanced Wipe
Select Dalvik / ART Cache, System, System_Ext, Data, Internal Storage, Vendor, Cache and then Swipe to Wipe. [All your data into Internal Storage will be lost]
Go back > Press Reboot > Reboot to Recovery again. [That step needed for the next step of formating the data because TWRP by REIGNZ have issue]
Go back and select Wipe > Format Data > type yes [All your data into Internal Storage will be lost]
Flash ROM > GApps [Optional]
[Optional] Mount Vendor and Flash DFE [Optional - Not Recommended] or Encryption [Optional] (Read DFE & Encryption Guide above)
Reboot Enjoy!
[Optional] If you want to root, reboot once again to TWRP Recovery and flash Magisk then reboot to system and enjoy!
DIRTY INSTALL YOUR CUSTOM ROM
Note: Before you start flashing, keep in mind the ROM you dirty flashing MUST be the same with the one you have already installed.
1. Make a full nandroid backup, just in case something goes wrong. You can use TWRP to do that. (TWRP > Backup > Select everything) [Optional]
2. Remove all Magisk modules. [Optional]
3. Reboot to TWRP and Wipe Dalvik / ART Cache, System, System_Ext, Vendor, Cache.
4. Flash the ROM > GApps [Optional] > Magisk [Optional]
5. [Optional] Mount Vendor and Flash DFE [Optional - Not Recommended] or Encryption [Optional] (Read DFE & Encryption Guide above)
6. Reboot and Enjoy!
I've skipped some explanations, because if you are going to dirty flash, you already know for example how to boot to TWRP.
CLEAN INSTALL OFFICIAL STOCK MIUI ROM & RELOCK BOOTLOADER
Note: Some AMD Ryzen or Intel Systems may have problems to recognize your device in fastboot. [Read the AMD Ryzen/Intel Fastboot Fix Guide above]
1. Backup all your data to PC or to external SDCard, if it's possible. [All your data into Internal Storage will be lost]
2. Download the official Fastboot ROM and unzip it to your PC. [You can find it in my Collection]
3. Download Xiaomi Mi Flash Tool and run XiaomiMiFlash.exe.
4. Turn off you device and then boot in Fastboot mode by pressing Power Button + Volume Down (–) and keep holding both buttons until the word “FASTBOOT” appears on the screen, then release.
5. Connect your device to PC via USB Cable.
6. On the Xiaomi Mi Flash Tool, Click on Select and browse to the folder where you have Unzip the downloaded ROM file then press OK.
7. Click on Refresh button and you will see that your device connected to port com.
8. Select what method you prefer:
Clean All: The process will flash full Fastboot ROM and will wipe everything (include user data) but Bootloader will remain unlocked.
Save User Data: The process will flash Fastboot ROM without wiping user data.
Clean All and Lock: The process will flash full Fastboot ROM and will wipe everything (include user data) but Bootloader will be relocked
9. Now click on the Flash button to begin the flashing progress.
10. Once your ROM is successfully flashed, you’ll see green bar inside XiaomiMiFlashtool.
BACKUP & RESTORE ROM (NANDROID BACKUP)
Check this Youtube Video to see the process in action.
Backup:
1. Remove Lockscreen Method. (You will have to set fingerprints again after Restore)
2. Reboot to Recovery (Power Button + Volume Up (+))
3. Choose Backup and Select Boot > System Image > Vendor Image > Data (excl. storage)
4. Select Storage and choose SDcard if you have one otherwise let it on Internal Storage.
5. Swipe to Backup.
6. Done!
Restore:
1. Reboot to Recovery. (Power Button + Volume Up (+))
2. Select Wipe > Advanced Wipe.
3. Select Dalvik / ART Cache, System, System_Ext, Data, Vendor, Cache and then Swipe to Wipe.
4. Press Home Button to go back and Select Restore.
5. Select the backup file with the ROM and make sure Boot, System Image, Data (excl. storage) and Vendor Image are selected.
6. Select Swipe to Restore and when completed Reboot to System.
7. Done!
Note: After you restore backup you might be unable to use old lock method such as PIN or Pattern to unlock your device (that's why you remove it before you take backup), in order to remove lock method you need to boot recovery and then:
Mount system
Go to file manager
Go to data/system
Delete locksettings.db
This way, you will not have any lock method set, but added fingerprints will remain.
FIX FOR STUCK ON OREO FIRMWARE (SOFTBRICKED)
FIX (Read Carefully)
MAGISK ROOT
The easiest way to root your device is via Magisk, it should work in all ROMs, Stock and Customs.
Install Magisk:
1. Install latest TWRP Recovery. [Read the Install Custom Recovery Guide above]2. Download the Magisk [You can find it in my Collection]3. Reboot to TWRP Recovery by pressing Power Button + Volume Up (+) and flash it.4. Reboot and check whether the Magisk app is installed. If it isn’t installed automatically, manually install the APK. [You can find it in my Collection]Note#1: From Official TWRP Recovery 3.5.1 and onwards (and other recoveries based on that), Magisk.apk can be flashed as apk without the need of rename it to .zip. So you can simply flash the Magisk.apk in TWRP.Manually Creation of Flashable Zip:Download the latest Magisk APK and rename the Magisk.apk → Magisk.zip.Note#2: If your bank apps detect root, follow this Guide.
Uninstall Magisk:
Flash the Uninstall.zip in TWRP Recovery and reboot. [You can find it my Collection]
If Magisk App isn’t uninstalled automatically, manually uninstall the app.
Manually creation of Flashable Uninstall Zip:
Download the latest Magisk APK and rename the Magisk.apk → uninstall.zip
Uninstall Magisk directly through the Magisk app. Simply press the Uninstall button.
Note: If your apps detect root, follow this Guide (or this) to pass SafetyNet and have certified Play Store. [YouTube Video Guide]
DISABLE FORCE ENCRYPTION (DFE) & ENCRYPTION
[You can find it in my Collection]
Disable Force Encryption
Disable Force Encryption (a.k.a DFE) is flashed during installation of a custom ROM to avoid the system encrypting /data partition when the devices boot for the first time.Some ROMs are not encrypted by default and so is not necessary to flash DFE. However if your ROM comes with encryption by default you can always flash DFE after clean installation of ROM and always after every update or flash or you can use any custom recovery like OrangeFox, Pitchblack, Skyhawk Recovery Project which can automatic flash DFE after every flash.I don't recommended to use DFE if you don't switch ROMs frequently and you are casual user. Beside the fact that if you lose your device your data are not protected, many people get in confusion while doing OTA or manually updates, which if the ROM is encrypted by default and flashed DFE and in next update you forget to flash DFE you will lock out from your data and you wil get into bootloop (use custom recoveries mentioned above to avoid that).
Encryption
Encrypted ROMs are recommended if you are stable and casual user of a ROM. Encryption have the benefit to protect your data, in case you lose your device for example. Always use the latest TWRP Recovery so you can be able to decrypt the data by filling the same lock screen password you have set in ROM.Some ROMs are not encrypted by default but devs provide an Encryption.zip (script) which can encrypt the ROM. Same as DFE you need to flash it after clean installation of ROM and always after every update to stay encrypted and not get into bootloop. Unfortunatly there is not any custom recovery automatic doing that like with DFE, so you must be careful, avoid doing OTA updates and flash it every time you manually update a ROM.
REMOVE SECURITY PIN/PATTERN (LOCKSCREEN SETTINGS)
Check HERE and HERE.
SCREEN RETENTION FIX
Screen Retention FIx: If you have an issue with screen retention apply this configuration to your device ROM.
HOW TO TAKE LOGS
How to take logs on Android
BATTERY TIPS
Xiaomi POCOPHONE F1 Battery Model: BM4E
Battery Replacment (Video)
Recommended Battery: NOHON for POCO F1 (AliExpress)
Advanced Guide
Simple Battery & Charging Tips
Improve your SOT
Battery Calibration
Method 1
Steps:
1. Discharge your phone fully until it turns itself off.
2. Turn it on again and let it turn itself off.
3. Plug your phone into a charger and, without turning it on, let it charge until the on-screen or LED indicator says 100 percent.
4. Turn your phone on. It's likely that the battery indicator won't say 100 percent, so plug the charger back in (leave your phone on) and continue charging until it says 100 percent on-screen as well.
5. Unplug your phone and restart it. If it doesn't say 100 percent, plug the charger back in until it says 100 percent on screen.
6. Repeat this cycle until it says 100 percent (or as close as you think it's going to get) when you start it up without it being plugged in.
Method 2
Notes: It won't dramatically extend battery life, but it will give your old battery at least 30 minutes additional run time.
Steps:
1. Get "GSam or Ampere" from the Google Play Store.
2. Launch the app and fully charge your phone. (Important: Only proceed with the calibration when the word "Full" appears in GSam or Ampere.)
3. While your phone is still connected to the cable reboot your phone to recovery mode, open file manager and navigate to "/data/system" and delete "batterystats.bin," "batterystats-checkin.bin," and "batterystats-daily.xml."
4. Reboot your phone (while it is still plugged in) and charge it until it reads "full" on GSam or Ampere.
5. Unplug the cable and use your phone normally until it shuts down (0 percent )
6. Charge your phone to 100% while it is turned off.
7. Boot into os and plug in your phone and charge it until it says "full" on the GSam or Ampere.
8. Unplug and have fun!
Battery Capacity Health
Notes:
1) Before checking the battery health, charge the device to 100%.
2) Check charge counter values and consider first 4 digits from left as your battery capacity in mAh. And check charge counter. (Charge counter/level)*100 is the battery capacity.
To find battery capacity in Windows:
Enable Developer options in your device.
Enable USB Debugging in your device.
Conect your device to PC and give permissions.
Open Minimal ADB (run cmd.exe) or Platform tools.
Type "adb shell dumpsys battery" command in Minimal ADB or Platform tools.
To find battery capacity in Android (Terminal) - Root needed:
Download an android terminal app like Termux,
Open terminal and type: cat/sys/class/power_supply/battery/charge_full
Overheating
Following reasons will lead to device heating issue:
During the initial setup after purchase or when restoring data.
Downloading large files.
Using apps that require more power or using apps for extended periods such as:
Playing high-quality games for long time.
Recording videos for extended periods.
Streaming videos while using the maximum brightness setting.
Using the Screen Mirroring / Smart View feature (connecting mobile to a TV).
While multitasking or when running many apps in the background i.e:
Using Multi window.
Updating or installing apps while recording videos.
Downloading large files during a video call.
Recording videos while using a navigation app.
Large amount of data for syncing with the cloud, email, or other accounts.
Exposing device under sunlight when temperature is high around you.
Extensive usage of mobile hotspot and tethering feature.
Using device in areas with weak signals or no reception or in roaming network.
Charging the battery with a damaged / unapproved USB cable.
Device's multipurpose jack is damaged or exposed to foreign materials, such as liquid, dust, metal powder, and pencil lead.
Solution:
Turn off Wi-fi, GPS , bluetooth and other connectivity options when not in use by dragging the notification panel.
Decrease screen brightness.
Close background running applications.
Too many applications installed in device may result in device heating since their corresponding process will keep on running in background. It is advised to uninstall un-necessary apps if not using them.
Avoid using apps like GPS, data dependent apps or graphic intensive games for longer duration since they require more energy to function, causing device to heat.
It is advised not to use device while charging as it may cause the device to over heat.
General:
DO:
Use manual brightness or dim the screen.
Turn off notifications for apps you don't use. Better still, delete/disable the apps entirely if you don't need them.
Enable battery or power saving mode when you want to extend your battery life.
Use the power adapter that came with your phone. Other chargers can charge slowly/faster but they can also damage your phone or battery.
Turn off bluetooth, location tracking, and Wi-Fi (unless you are actively using it)
Turn off print services from bluetooth connection preferences.
Avoid extremes of heat and cold. If your phone gets very hot or cold it can strain the battery and shorten it's lifespan.
DON'T:
Have Bluetooth or Wi-Fi turned on constantly.
Leave apps running in the background. Instead restrict background usage off apps that you don't need running.
Push email means your device is always listening for new email which drains alot of battery.
Drain your phone battery all the way to 0% or charging it all the way to 100%. Keep it between 20% - 90% for longer battery lifespan.
The more advanced the graphics and animations are (games, videos, photos, animations), the harder the processor and graphics chip in your smartphone have to work. More activity means more battery use.
PRIVACY & SECURITY
Some useful links:
All about Privacy & Security at Privacy Guides.
Electronic Frontier Foundation.
Check if your email address or your phone number is in a data breach at Have I been Pwned & at Firefox Monitor.
PrivacyTests: Open-source tests of web browsers privacy.
Test your browser to see how well you are protected from tracking and fingerprinting at Cover Your Tracks by EFF and at Bromite fingerprint mitigations tests.
WebRTC IP Leak Test. WebRTC is a new communication protocol that relies on JavaScript that can leak your actual IP address from behind your VPN. You can find more infos how to disable it at Privacy Guides in browsers section.
Ad Block Tester is a free service on the Internet to evaluate content blocking solutions. It is not designed to be a benchmark, but it reveals the level of blocking against a set of hosts that are very popular.
Check on AM I FLoCed? by EFF if your your Chrome browser has been turned into a guinea pig for Federated Learning of Cohorts or FLoC, Google’s latest targeted advertising experiment.
How to block ads on Android.
εxodus: εxodus analyzes Android applications in order to list the embedded trackers and ads.
Spyware Watchdog Article Catalog: A catalog which determinate under tests and tracking if an app is spyware and what data it collects.
CryptPad: CryptPad is built to enable collaboration. It synchronizes changes to documents in real time. Because all data is encrypted, the service and its administrators have no way of seeing the content being edited and stored.
PrivateBin: PrivateBin is a minimalist, open-source online pastebin where the server has zero knowledge of pasted data. Data is encrypted/decrypted in the browser using 256-bit AES. It is the improved version of ZeroBin.
ShutUP10++ , Privacy.Sexy: Disable major tracking features of Windows.
General:
Always prefer Open Source or well popular Programs, Apps, ROMs, Kernels & Stuff.
Open Source doesn't mean it's 100% safe but it's unlikely to have something suspicious, since you and other users can check the code in GitHub or in any other code hosting platform the "stuff" is hosted. You can also find and use FOSS apps at F-Droid or at Droid-ify (Recommended).
Prefer ROMs & Kernels with SELinux Enforcing. You can find informations here.
Always download and install Apps, Programs, ROMs & Stuff from official sources and do not use redirection links from different sites. Google is your friend to find the official source of the stuff you want.
Always check the permissions an app requires, before download and install it to your device. If an app ask for permissions which has nothing to do with the app functionality then it's should be reconsider or ask the developer why these permissions needed.
You can also check if the app includes trackers and ads with εxodus.
If you want to avoid Google and Play Store (De-Google), you can choose a ROM without GApps preinstalled like LineageOS and use Droid-ify client which is an installable catalogue of FOSS (Free and Open Source Software) applications for the Android platform. The client makes it easy to browse, install, and keep track of updates on your device. Note that not all apps from Play Store will be available in Droid-ify or F-Droid. Only Open Source projects. You can find alternatives though.
Alternative you can use LineageOS for microG or any ROM which support signature spoofing and can support microG and use Aurora Store.
For Windows use the default Windows Defender & Malwarebytes to scan your files whenever you want (Prefered before open or install them). Also use the addon/extension uBlock Origin in your Browser. These should be enough for normal users. You can also use the tool ShutUP10++ or Privacy.Sexy to disable major tracking features of Windows.
For Android Do not use any antivirus - antimalware since it's useless, just check what apps and from where you installing.
Always verify the source of addons/extensions in your browser. Avoid installing random and unpopular addons/extensions. Keep it minimal and clean, so browser can be fast and safe, no need bunch of extensions.
If you are using VPN, always check the terms and rules of the provider. Avoid random VPN Services.
Recommended VPN Services.
Using a VPN will not keep your browsing habits anonymous, nor will it add additional security to non-secure (HTTP) traffic.
Recommended is to encrypt your data/files always before uploading them to cloud with tools like Cryptomator.
Always use unique and strong passwords for each of your accounts.
Use awarded open source Password Managers like KeePass or KeePassXC for Desktop and KeePassDX for Android to manage your passwords and have them with you safe, encrypted and secure. Must be noted you can use the same database file between these programs.
Always enable 2 Step Authentication wherever is available for your accounts.
You can use apps like Aegis Authenticator.
Do not open or click on links attached in unknown emails or SMS you may get. Always check the address of the email or the number of SMS and verify it's legit from the official source.
Create and use "burned" email for accounts/sites you have concerns but you definitely want to try them. Do not use your personal or business email. You can also create and use email aliases of your email with SimpleLogin which is open source and awesome service.
Changelog
Note: Changes in Collection & Guides happens in real time. The date I post these Changelogs is just a sum up since I can't post all the changes the time that happening to avoid spamming the thread. So you can always consider the Collection & Guides Up-to-Date. However, I may announce some big changes in posts before I include them in the Changelogs.
LATEST
Update: 07/06/2023
Changelog
ARCHIVED
Update: 08/04/2023
Changelog
Update: 18/01/2023
Changelog
Update: 16/12/2022
Changelog
Update: 29/10/2022
Changelog
Update: 24/09/2022
Changelog
Update: 02/08/2022
Changelog
Update: 01/07/2022
Changelog
Update: 30/05/2022
Changelog
Update: 01/05/2022
Changelog
Update: 28/02/2022
Changelog
Update: 28/02/2022
Changelog
Update: 07/02/2022
Changelog
Update: 20/01/2022
Changelog
Update: 23/12/2021
Changelog
Update: 20/11/2021
Changelog
Update: 16/10/2021
Changelog
Update: 31/08/2021
Changelog
Update: 02/08/2021
Changelog
Update: 17/07/2021
Changelog
Update: 22/06/2021
Changelog
Update: 23/05/2021
Changelog
Update: 01/05/2021
Changelog
Update: 19/04/2021
Changelog
Update: 04/04/2021
Changelog
Update: 16/03/2021
Changelog
Update: 27/02/2021
Changelog
Update: 26/02/2021
Changelog
Update: 23/02/2021
Changelog
Update: 21/02/2021
Changelog
Update: 25/01/2021
Changelog
Update: 14/01/2021
Changelog
Update: 13/01/2021
Changelog
Update: 17/12/202
Changelog
Update: 20/11/2020
Initial Release
Awesome job, my friend! :good:
Great job. Everything in one place.
Sent from my POCOPHONE F1 using Tapatalk
Amazing Work. All silly and important questions have been answered at one place.
+Add Mi Assistant (Xiaomi PC Suite China) in Xiaomi Tools. It Helps to fix bootloop in locked bootloader nowadays.
this in one stop for all poco stuff...
amazing work.... [emoji106][emoji106][emoji106][emoji106]
SPLESHER said:
Awesome job, my friend! :good:
Click to expand...
Click to collapse
Kadajo said:
Great job. Everything in one place.
Sent from my POCOPHONE F1 using Tapatalk
Click to expand...
Click to collapse
Krisranger said:
Amazing Work. All silly and important questions have been answered at one place.
+Add Mi Assistant (Xiaomi PC Suite China) in Xiaomi Tools. It Helps to fix bootloop in locked bootloader nowadays.
Click to expand...
Click to collapse
Mr.Sm1th said:
this in one stop for all poco stuff...
amazing work.... [emoji106][emoji106][emoji106][emoji106]
Click to expand...
Click to collapse
Thank you guys! I will try to keep the thread always up-to-date.
If you find a broken link, something wrong or you have a suggestion, please do not hesitate, tell it!
Today I made couple of changes in Guides & Collection so infos can be more clear and I've added some stuff!
Retrial said:
Thank you guys! I will try to keep the thread always up-to-date.
If you find a broken link, something wrong or you have a suggestion, please do not hesitate, tell it!
Today I made couple of changes in Guides & Collection so infos can be more clear and I've added some stuff!
Click to expand...
Click to collapse
Im in now miui global 12.0.2
I facing problem while voice call
Another end of caller hear a noise
Is there fix
Please guide me ...
hari1jack said:
Im in now miui global 12.0.2
I facing problem while voice call
Another end of caller hear a noise
Is there fix
Please guide me ...
Click to expand...
Click to collapse
Try to do factory reset (firstly save all your personal data to PC or to external SDCard). 12.0.2 and general all the latest miui updates are full of bugs and slow down your device. Also the chances to get new android version in miui are very low. I will not talk about security and tracking.
I recommended you to move away from miui and use a custom rom of your choice. :fingers-crossed:
Awesome thread, everything at one place. Thanks man.
You have gathered so much collective information at one place. It will be helpful if we found which Roms are from Pixel Ports and supports Google photos free unlimited high quality storage.
OP, this is a godsend! Thank you so so much. Any idea what settings I should be using for the most "pixel like" photos on parrots gcam?
raydialseeker113 said:
OP, this is a godsend! Thank you so so much. Any idea what settings I should be using for the most "pixel like" photos on parrots gcam?
Click to expand...
Click to collapse
Hey thanks! I mostly use the default settings and I get very nice photos.
Krisranger said:
You have gathered so much collective information at one place. It will be helpful if we found which Roms are from Pixel Ports and supports Google photos free unlimited high quality storage.
Click to expand...
Click to collapse
Unfortunately, It's unknown yet. I will keep an eye on it but I doubt if it will work. Even new pixel phones will not have free unlimited storage. We will see...
Retrial said:
Hey thanks! I mostly use the default settings and I get very nice photos.
Click to expand...
Click to collapse
Any idea why the autofocus on the camera is so broken?
Using PE+ and ngk2.0
raydialseeker113 said:
Any idea why the autofocus on the camera is so broken?
Using PE+ and ngk2.0
Click to expand...
Click to collapse
I don't know but you can try the latest port of Parrot or use Sanitys or BSG ports. Try and find out which is the best for you You can also try to ask on Photography thread.
Retrial said:
Try to do factory reset (firstly save all your personal data to PC or to external SDCard). 12.0.2 and general all the latest miui updates are full of bugs and slow down your device. Also the chances to get new android version in miui are very low. I will not talk about security and tracking
I recommended you to move away from miui and use a custom rom of your choice. :fingers-crossed:
Click to expand...
Click to collapse
Thank you for the reply ...
Can you suggest me bug less rom without mic issue during call
Retrial said:
Unfortunately, It's unknown yet. I will keep an eye on it but I doubt if it will work. Even new pixel phones will not have free unlimited storage. We will see...
Click to expand...
Click to collapse
Yes new pixel phones will not have this advantage. (New pixel phones which ain't even launched yet)
But we have some roms which are ported from existing pixel phones like Pixel 3 and Pixel 4.
I got to know that Awaken OS based on Android 11 is detecting as Pixel 4 in Google photos. I'm not sure, I personally didn't install it yet.
I'm sure about some Roms and Ports like Pixel Rom and Pixel 4 xl ports are obviously detecting as Pixel 4 and they are enjoying new Google Assistant and Google One features as well.
hari1jack said:
Thank you for the reply ...
Can you suggest me bug less rom without mic issue during call
Click to expand...
Click to collapse
I personally use Pixel Experience the Plus Edition. It's stable and ready out of the box.
However there a lot of nice ROMs, you check them in my collection and decide which fit for you.
Krisranger said:
Yes new pixel phones will not have this advantage. (New pixel phones which ain't even launched yet)
But we have some roms which are ported from existing pixel phones like Pixel 3 and Pixel 4.
I got to know that Awaken OS based on Android 11 is detecting as Pixel 4 in Google photos. I'm not sure, I personally didn't install it yet.
I'm sure about some Roms and Ports like Pixel Rom and Pixel 4 xl ports are obviously detecting as Pixel 4 and they are enjoying new Google Assistant and Google One features as well.
Click to expand...
Click to collapse
Well the thing is we don't know yet if POCO F1 detecting as Pixel 4 in Google Security is enough to bypass and trick Google to have unlimited storage. We need to wait till June 1st, 2021 which this change will take place. Until then, the storage remain unlimited.
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
(NOTE YOU CANNOT UPDATE FROM PE 11 WITHOUT SEVERE BUGS BACKUP YOUR DATA WITH NANDROID OR ANOTHER APP AND RESTORE IN 12)
Based on Android 12.0
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:-
mtp (aka transferring files from phone to pc or vice versa with a cable) will not work with adb (it will freeze phone ) to use mtp disable usb debugging in developer options then once you disable usb debugging click usb settings and choose storage
headphone jack does not work (enable use alternative way to detect headsets in phh settings)
audio volume might be low on some devices install the dsp audio module and
DO NOT let the phone die of battery you will not be able to boot and it will be hard to get back into the system (workaround- in magisk install acca https://github.com/Magisk-Modules-Repo/acc and install this apk after installing https://github.com/MatteCarra/AccA then set profile to default (this will shut down the phone at 5% hence removing the risk of your phone not booting after hitting 0%
You tell me
Links
Rom- Download
Stock Samsung kernel source.
Install-
1.Use twrp 3.5.1 (others did not work for me good luck in testing)
2 Unpack the "xz" archive and put the .img file onto the sd card or internal (if you dont have a sd card do step 3 then transfer the img file to your phone)
3. In TWRP head to factory reset format type yes and hit enter
4. Flash the img file (as system obviously)
5. flash eureka oneui kernel (DONT FLASH THE NON ONEUI ONE ONLY FLASH ONEUI EUREKA KERNEL)
6. flash magisk (it is optional but for best performance you should) (use 21.0 for android 12)
Credits-https://github.com/phhusson/
ponces - Overview
Husband of Rita. Father of Luke. Fan of Android and Linux. There is no place like /home 🤓 - ponces
github.com
Pixel Experience Team, phhusson, AndyYan and eremitein -
Zainullah Boot fix (if you cant boot)
install oneui boot into oneui change date to 3 months from now
check for updates
boot into download mode
flash twrp and vbmeta
boot into twrp
do format data
flash multidisabler
flash rom
flash kernel as boot
do factory reset
reboot
if it boots you into fastboot shutdown flash twrp only and try another factory reset and reboot (In twrp)
(Android 12 )
No gapps needed (after installing update all apps in play store including play store itself)
Camera works but use gcam go mod by greatness https://www.celsoazevedo.com/files/android/google-camera/dev-greatness/f/dl9/
if there is any working gcam mod link it so i can test it
gcam go is way way better than the stock camera with hdr night mode portrait and soon filters
(ultra wide and other cameras do not work for now)
Increase performance without any battery impact or (by feravolt and gloeysik)
Step 1
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
- Go to the settings tab and use the AUTO settings for FDE AI.
Optimized and adjusted Google Play services. Contribute to gloeyisk/universal-gms-doze development by creating an account on GitHub.
github.com
install cloudflaredns4magisk
[MODULE] CloudflareDNS4Magisk
install adaway (optional if you want ads or not) , allow superuser for it download this https://energized.pro/bluGo/formats/filter in adaway click he button in the middle click add click file and add the file then go back to the main menu and click the reload button now https://adaway.org/
Blog
Pixel Experience
Donate
jhenrique09
phhusson
AndyYan
eremitein
ponces
supports A307gt?
yes this is a gsi it works on all a30 and a30s but there might be bugs try on your own risk there is no issues on my a307 -fn
There is a problem in the download link my IDM did not work here!
Please Upload a new link
#Beta_tester
it works try the new link
Is the file name (Pixel experience 11 stable)?
Rafyhasan69 said:
Is the file name (Pixel experience 11 stable)?
Click to expand...
Click to collapse
yes
Rafyhasan69 said:
Is the file name (Pixel experience 11 stable)?
Click to expand...
Click to collapse
tell me how the install goes and if there are any bugs
Zainullahk1234 said:
tell me how the install goes and if there are any bugs
Click to expand...
Click to collapse
PixelExperience_a30-11.0-20210913-0041-UNOFFICIAL.zip Did not flash via TWRP IT Gets Error
Rafyhasan69 said:
PixelExperience_a30-11.0-20210913-0041-UNOFFICIAL.zip Did not flash via TWRP IT Gets Error
Click to expand...
Click to collapse
E3004: This Package is for device: a30,a30dd; this device is a30s.
Updater process ended with error: 1.
how to fix the screen
Rafyhasan69 said:
how to fix the screen
Click to expand...
Click to collapse
yes Go to settings → Phh Treble Settings → Misc features →set Rounded corners to 30
Rafyhasan69 said:
how to fix the screen
Click to expand...
Click to collapse
did it work?
yes it works
hi, does nfc work ?
makadang said:
hi, does nfc work ?
Click to expand...
Click to collapse
yes
Zainullahk1234 said:
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11.0
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:- Fingerprint does not work (Can be fixed but is very complex and will not be included in tutorial)
fake corners that cut the screen (fix included in thread)
You tell me
Links
Rom- https://github.com/zainullahk/Pixel-expierence-For-a30-and-a30s-
Stock Samsung kernel source.
Install-
1.Need TWRP 3.4.0 or higher!
2. Unpack the "xz" archive and put the .img firmware file into your storage or sd card
3. Go to TWRP and do wipe data-yes
4. Make Wipe data, cache, cache-Dalvik in advanced wipe
5. Flash our .img file which we threw on the Usb/sdcard/storage
6. If you want flash magisk flash it
7. how to fix the rounded corners issue Go to settings → Phh Treble Settings → Misc features →set Rounded corners to 30
Credits-https://github.com/phhusson/treble_experimentations/releases
(Android 11 )
No gapps needed (after installing update all apps in play store including play store itself)
Camera works but use gcam go mod by greatness https://www.celsoazevedo.com/files/android/google-camera/dev-greatness/f/dl9/
if there is any working gcam mod link it so i can test it
gcam go is way way better with hdr night mode portrait and soon filters
(ultra wide and other cameras do not work)
(if face unlock is not working download the pixel feature drop magisk module and install it this fixed face unlock for me and also added more pixel only features
GitHub - ayush5harma/PixelFeatureDrops: Magisk Module for Pixel Feature Drops that adds the system files for the same and spoof using the latest device fingerprint from Google Pixel .
Magisk Module for Pixel Feature Drops that adds the system files for the same and spoof using the latest device fingerprint from Google Pixel . - GitHub - ayush5harma/PixelFeatureDrops: Magisk Modu...
github.com
(images)
View attachment 5447277View attachment 5447279View attachment 5447281View attachment 5447275
Click to expand...
Click to collapse
new bug fix update
nfc did not work on some devices this is fixed
face unlock fixed
minor performance improvements
Rafyhasan69 said:
yes it works
Click to expand...
Click to collapse
flash this in twrp https://forum.xda-developers.com/t/...flagship-stereo-sound-system-for-a30.4245743/ it will fix sound
Zainullahk1234, good job man. The best firmware for today. Thanks for it.
Works great! Thanks
edit: headphones true jack not working?!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LITE OS = Stock ROM - Bloatware + Optimization
As we have seen Realme Provides a good OS with some nice to have features and some extra things that are locked down and not available in Custom ROMs such as Floating Apps , Integrated App Lock , Dual System Profile , Various AOD themes nad better Battery Management to list a few.
But it has some serious flaws too like
1) Useless Apps like HOt Apps , heytap apps that cant be removed
2) Outdated drivers for GPU
3) Trackers in inbuilt apps and system
This LITE OS aims to fix all these issues and also add some nifty features that wont have any side effect on Stability of OS.
These features are
1) More Privacy
2) Faster Boot Time
3) Lower Idle System Resource Usage
4) 140+ unnecessary apps removed
5) Higher Read / Write speed than stock
6) Better Performance in Games and Heavy Task
7) Trackers and Loggers disabled or removed
8) Reduced excessive permissions for Google Apps
9) Updated GPU drivers to maximum supported version of v530
10) Removed some gimmicky features that only reduce performance of Device
The LITE OS is made from the most recent and stable OTA from INdian variant of Realme GT NEO 2 ,Other egion usrs can also install and try this ROM but there might be some possibility that some bugs may appear in future . Indian Variant is used because Chinese version has too many Chinese tracking apps , European Vertsion does not have Call recording feature , and Russian vartiant gets fewer updates . You can try either
Android 11 based LITE OS RUI2
Android 12 based LITE OS RUI3
Android 13 based LITE OS RUI4
WARNING
If you are proceeding and installing this software , you yourself would be only responsible for anu loss of data or destruction of device or its capabilities happen ,
Neither me , nor XDA will be responsible for your actions which you took yourself .
ABOUT
This LITE OS has been in existence for nearly a year but after many people told me to publish it on XDA , I am releasing the latest version in May 2023 .
Prior to this 6 versions have been released on sourceforge along with Telegram , some older versions were lost as they were uploaded on Mega .
Requirements :-
You need unlocked bootloader device
Any custom recovery installed .
Free space of About 10 GB in device or Pen Drive
Ability to restore device , if it gets bricked beacuse of your own noviceness
Instructions :-
Download the zip from download section and match checksum
Backup all apps , media and other data to pc or Pen-drive
Extract the Zip and copy paste files to Device main Storage
Boot into Custom Recovery flash the SuperPartition.img into super partition .
And then flash the RUI_LITE_OS-firmware.zip , if the process completes successfully then only proceed to next step .
Now comes an important step where you have to be careful
#) If You were previously on Stock ROM or custom ROM ....>> You need to wipe Dalvik , Cache , Data & Internal Storage i.e clean-flashing
OR
#) If You were on LITE OS before , you need to wipe Dalvik and Cache only i.e, dirty-flashing
After wiping is done , reboot the phone to system and wait for it to boot , If you have followed the process correctly a yellow realme logo will show and within 5 minutes you will be greeted with a setup screen ,Complete the Setup and Enjoy a de-bloated and optimized device .
What to do after first boot ? (Suggested yet Optional)
Restore your data , either by Google or by Swift Backup / Migrate .
Reinstall the Realme UI Dialer App apk from extra folder and make it default app for calling and give all permissions .
After that root with Magisk delta if you want to use root and other modules
Let the device settle down for 2-3 hours , before saying it is lagging
What to Never Do ?
Switch off PHone or do this with process with less than 30% charge while flashing Firmware
Unroot from Magisk via unistaller zip or Magisk app (If you want to unroot just flash firmware package again )
To disturb the device while it is doing first boot
NOt backing-up data to external devices like PC or otg-pendrive
Installing Modules meant for AOSP or Custom ROMs
DOWNLOADS
Click here to Download -> [RUI4_LITE_OS_F05] | (Size-4GB) | Update date 09/05/2023
Kindly Dont Mirror the ROM
Credits -
Satham for TWRP
Peter for suggesting optimizations
TheMalachite for making device trees
Andreock for Custom Dragon Kernel for LITE OS
Mr Delta and gang for support
Previous Versions of LITE OS
RUI4 based on Android 13
LITE OS F03
LITE OS F02
LITE OS F01
RUI3 based on Android 12
LITE OS C10
LITE OS C08
RUI2 based on Android 11
LITE OS A09
Tips
1)Kindly Use safetynet-fix by displax to fix safetynet integrity check failing
RMX3370 said:
View attachment 5907269
LITE OS = Stock ROM - Bloatware + Optimization
As we have seen Realme Provides a good OS with some nice to have features and some extra things that are locked down and not available in Custom ROMs such as Floating Apps , Integrated App Lock , Dual System Profile , Various AOD themes nad better Battery Management to list a few.
But it has some serious flaws too like
1) Useless Apps like HOt Apps , heytap apps that cant be removed
2) Outdated drivers for GPU
3) Trackers in inbuilt apps and system
This LITE OS aims to fix all these issues and also add some nifty features that wont have any side effect on Stability of OS.
These features are
1) More Privacy
2) Faster Boot Time
3) Lower Idle System Resource Usage
4) 140+ unnecessary apps removed
5) Higher Read / Write speed than stock
6) Better Performance in Games and Heavy Task
7) Trackers and Loggers disabled or removed
8) Reduced excessive permissions for Google Apps
9) Updated GPU drivers to maximum supported version of v530
10) Removed some gimmicky features that only reduce performance of Device
The LITE OS is made from the most recent and stable OTA from INdian variant of Realme GT NEO 2 ,Other egion usrs can also install and try this ROM but there might be some possibility that some bugs may appear in future . Indian Variant is used because Chinese version has too many Chinese tracking apps , European Vertsion does not have Call recording feature , and Russian vartiant gets fewer updates . You can try either
Android 11 based LITE OS RUI2
Android 12 based LITE OS RUI3
Android 13 based LITE OS RUI4
WARNING
If you are proceeding and installing this software , you yourself would be only responsible for anu loss of data or destruction of device or its capabilities happen ,
Neither me , nor XDA will be responsible for your actions which you took yourself .
ABOUT
This LITE OS has been in existence for nearly a year but after many people told me to publish it on XDA , I am releasing the latest version in May 2023 .
Prior to this 6 versions have been released on sourceforge along with Telegram , some older versions were lost as they were uploaded on Mega .
Requirements :-
You need unlocked bootloader device
Any custom recovery installed .
Free space of About 10 GB in device or Pen Drive
Ability to restore device , if it gets bricked beacuse of your own noviceness
Instructions :-
Download the zip from download section and match checksum
Backup all apps , media and other data to pc or Pen-drive
Extract the Zip and copy paste files to Device main Storage
Boot into Custom Recovery flash the SuperPartition.img into super partition .
And then flash the RUI_LITE_OS-firmware.zip , if the process completes successfully then only proceed to next step .
Now comes an important step where you have to be careful
#) If You were previously on Stock ROM or custom ROM ....>> You need to wipe Dalvik , Cache , Data & Internal Storage i.e clean-flashing
OR
#) If You were on LITE OS before , you need to wipe Dalvik and Cache only i.e, dirty-flashing
After wiping is done , reboot the phone to system and wait for it to boot , If you have followed the process correctly a yellow realme logo will show and within 5 minutes you will be greeted with a setup screen ,Complete the Setup and Enjoy a de-bloated and optimized device .
What to do after first boot ? (Suggested yet Optional)
Restore your data , either by Google or by Swift Backup / Migrate .
Reinstall the Realme UI Dialer App apk from extra folder and make it default app for calling and give all permissions .
After that root with Magisk delta if you want to use root and other modules
Let the device settle down for 2-3 hours , before saying it is lagging
What to Never Do ?
Switch off PHone or do this with process with less than 30% charge while flashing Firmware
Unroot from Magisk via unistaller zip or Magisk app (If you want to unroot just flash firmware package again )
To disturb the device while it is doing first boot
NOt backing-up data to external devices like PC or otg-pendrive
Installing Modules meant for AOSP or Custom ROMs
DOWNLOADS
Click here to Download -> [RUI4_LITE_OS_F05] | (Size-4GB) | Update date 09/05/2023
Kindly Dont Mirror the ROM
Credits -
Satham for TWRP
Peter for suggesting optimizations
TheMalachite for making device trees
Andreock for Custom Dragon Kernel for LITE OS
Mr Delta and gang for support
Click to expand...
Click to collapse
Thanks for the efforts. Last time I've tried LITE OS I couldn't setup 4-digit PIN, only 6-digits, it was throwing me out of the settings, probably because some excessive debloat. Could you kindly tell if that doesn't happen now? Thanks again
Thank you for sharing it here. I tried f03, and I had trouble with sending sms and doing calls. Hopefully, this is fixed in this version...
Any important differences between European and Indian versions apart from the European not having the call recorder?
Edit: For some reason, on the Play Store, it says Rocket League Sideswipe is not compatible with my device, won't even let me download it... Although I downloaded it from APKPure and it seems to work fine.
rtkpX said:
Any important differences between European and Indian versions apart from the European not having the call recorder?
Edit: For some reason, on the Play Store, it says Rocket League Sideswipe is not compatible with my device, won't even let me download it... Although I downloaded it from APKPure and it seems to work fine.
Click to expand...
Click to collapse
No major difference between EU or Indian variant , Indian variant preferred for call recording feature
Does the Android 13 version support Gpu drivers V707?
I've tried all the versions. All the versions, you can't do calls or send sms in China...
george343456 said:
Does the Android 13 version support Gpu drivers V707?
Click to expand...
Click to collapse
No support for any driver above v530 as it will cause camera failure and random crashes and lags
Shiw Liang said:
I've tried all the versions. All the versions, you can't do calls or send sms in China...
Click to expand...
Click to collapse
I think it is because ORoaming is removed , it is required app for Chinese SIM to function but not for Global SIMs and since it tracks and keeps record of calls being made it was removed from LITE OS , and because of this ,Lite OS may not be compatible with Chinese Telecom Operators
RMX3370 said:
No support for any driver above v530 as it will cause camera failure and random crashes and lags
Click to expand...
Click to collapse
Now V690 for openGL And Vulkan camera work!
Where i can find SuperPartition.img?
Rxfireblade said:
Where i can find SuperPartition.img?
Click to expand...
Click to collapse
Stock one ?
Lite OS one is inside the zip , you will get it after extracting the zip
RMX3370 said:
Stock one ?
Lite OS one is inside the zip , you will get it after extracting the zip
Click to expand...
Click to collapse
Ok perfect,THX