Display issue at 120hz and low brightness - Samsung Galaxy Note 20 Ultra Questions & Answers

My note 20 ultra has vague gray horizontal lines when displaying a gray background at the lowest brightness when running at 120Hz but it disappears at when the brightness increases or when switching to 60hz. Is this normal for AMOLED displays ?

I tried doing it on my unit but everything seems fine. Can you send a photo so we can see what it looks like?

It's prominently visible in a dark room

This is when it's running at 120hz

Same here

They all have it. It's the 120hz mode banding.

KRA1T said:
My note 20 ultra has vague gray horizontal lines when displaying a gray background at the lowest brightness when running at 120Hz but it disappears at when the brightness increases or when switching to 60hz. Is this normal for AMOLED displays ?
Click to expand...
Click to collapse
Same here have u sorted out this issue!?

I'm having the same trouble with my Samsung S20 Ultra as well. Mine wasn't even dropped or had put pressure on the screen for it to be physically damaged. I did, however, noticed the lines appear after an August security patch update was installed so I'm waiting to see if a new system update would fix the annoying lines. Other than that, the phone's performance (battery and processor wise) doesn't seem to have changed.

Related

Display is slightly blinking in specific conditions

Yesterday i noticed something strange in my OP7p and i'd like you to check whether something like this occurs in your phones. Issue, which i will describe occurs only when i have 90hz refresh rate set and the low brightness of the screen with the auto adjustment of brightness turned off. The easiest way to see that is on youtube application with a dark theme. When we start a movie on the full screen (horizontally) and watch it for a few seconds, then go back to the vertical position, there is something like weak but visible blink of the screen, or a minimal colours change. It can be noticed in other apps, e.g. on facebook. Seems to me this is a software problem, beacause the same phenomenon doesn't exists when we set 60hz refresh. I would be very grateful if you can check it on your phones and give me a know about it.
I don't usually start videos in full screen mode and never noticed it but yeah definitely does a white flicker.
This is the highest brightness I could get it to do the flicker at.
Thank you for an answer. Personally i am able to see this flicker on a little bit higher screen brightness, but maybe its because im sitting in a dark room now. I was worried cause sometimes i see it during the normal usage of phone, and if only my OnePlus would be affected by this flickering i could still return it or exchange for a new one. It isnt very disturbing however interesting is whats cause of it.
kamkoz96 said:
Yesterday i noticed something strange in my OP7p and i'd like you to check whether something like this occurs in your phones. Issue, which i will describe occurs only when i have 90hz refresh rate set and the low brightness of the screen with the auto adjustment of brightness turned off. The easiest way to see that is on youtube application with a dark theme. When we start a movie on the full screen (horizontally) and watch it for a few seconds, then go back to the vertical position, there is something like weak but visible blink of the screen, or a minimal colours change. It can be noticed in other apps, e.g. on facebook. Seems to me this is a software problem, beacause the same phenomenon doesn't exists when we set 60hz refresh. I would be very grateful if you can check it on your phones and give me a know about it.
Click to expand...
Click to collapse
this is usual for EVERY Oled screen and is called jelly effect...
You might want to try the DC dimming option in Settings->Utilities->OnePlus Laboratory.
matze19999 said:
this is usual for EVERY Oled screen and is called jelly effect...
Click to expand...
Click to collapse
From what i know jelly effect appears while we scrolling some content and propably that's not what i meant in my first post. Also flicker in my case is only visible on 90hz refresh rate.
I have galaxy s7e as a second phone and that effect doesn't happen there.
vishal3967 said:
You might want to try the DC dimming option in Settings->Utilities->OnePlus Laboratory.
Click to expand...
Click to collapse
Thanks but i tried this option and it didn't do the job well.

How is the DC dimming? Does it make the screen look noticely worse?

I have read articles that said using DC brightness on OLED/AMOLED screens can effect colors, particularly at low brightness. How are people finding it? I dont really care if it makes colours "less accurate" as long as they dont look weird
Looks fine to me. Barely can tell the difference.
Working well as described, couldn't tell the difference.
Can someone try to port it to OnePlus 3 / 3t?..
anz563 said:
Can someone try to port it to OnePlus 3 / 3t?..
Click to expand...
Click to collapse
What makes you think the 3 / 3T screen is capable of DC dimming? Can every AMOLED screen support it?
First off, I don't notice any flickering when the screen brightness is low so maybe DC dimming isn't for me. I'm sure someone with a fancy color monitor device will probably post a technical breakdown of how it affects the screen, but I don't see any difference except in one scenario.
In bed I tend to set the brightness settings on the lowest and then turn on nightmode to dim the screen even further. If you have small white text with a black background such as the settings menu or Youtube in dark mode, some of the text fades into the blackness and is unreadable. Images with dark colors or areas will look weird because you won't be able to distinguish them apart.
I tried to take pictures to show a comparison, but the screen is so dim that it doesn't work.

Display and Instagram issues

Hello to everyone, new user of the Xperia 5ii and I have two problems
1)Has anyone observed a slightly change in the colour of the screen between 60 and 120hz? It's very obvious if you have dark mode and sit in a dark room. When you toggle the selection on and off, you can easily see it
2)I was trying to upload an Instagram story and the quality drops significantly. You literally can distinguish pixels. It's only on Instagram, on Facebook there was no problem. Also I tried to upload the photos from another device, and the same problem exists.
Any help is most welcome
Antoni-o said:
Hello to everyone, new user of the Xperia 5ii and I have two problems
1)Has anyone observed a slightly change in the colour of the screen between 60 and 120hz? It's very obvious if you have dark mode and sit in a dark room. When you toggle the selection on and off, you can easily see it
Click to expand...
Click to collapse
This is true and if being honest, quite expected. It most noticable when the screen brightness is somewhere 5-20%. You can clearly see it when toggling the 60 or 120hz. The panel itself is great, many oled defects are gone or very minimal. This green tint issue is quite common on other 120hz panels too (mostly Samsung made). That might also be one reason why the new Iphone 12 phones don't have 120hz, too much quality problems.
So yes, there is a green tint. But luckily it is very minor and only on certain screen brightness. Haven't noticed it when actually using the phone.
Not sure if this count as a defect to get a replacement (the replacement would probably have the same issue).
Attached few photos I took.
I have the same issue in low-brightness and 120Hz activated

Question Adaptive brightness - do you think it works good?

Hello ,
I observe that, my s22ultra in the same conditions (light intensity) make darker screen than my old note10+.
In my old phone (note 10+), the adaptive brightness works very well for my eyes (maybe excluding reaction speed - but never it wasn't too bright or too dark (in my opinion), never had to change any settings.
S22Ultra always make's screen too dark for me (in all lighting conditions) and i compare works of with my old note10+ and approved my suspicion that s22u makes screen darker than note10+ in the same conditions.
In general, the "jump / scale" of switching from light to dark and vice versa is good, but I would have to move the "threshold / level 0" action to a slightly brighter - if anyone understands what I mean - you can do something about it, someone has an idea ? Can I fix working of this function ?
What do you think about adaptive brightness in S22U?
Are you satisfied with its functioning?
See the differences compared to your old phone (what mobile it was)?
Thank you very much for any suggestions
I have two N10+'s and as far as I'm concerned adaptive brightness never worked right. Maybe better than my S4. I disable and use manual control, easier on the battery, display and retinas. It also varies in spite of not seeing huge changes in lighting conditions when sitting, I find this very distracting.
Best practice to limit display on in direct sunlight to seconds not minutes. Avoid using in direct sunlight whenever possible.
I try to limit brightness to less than 50%, 30-40% is typical. As a result after almost 3 years of heavy usage my original N10+'s display is still perfect with no signs of wear.
If I know I'll need to use the phone in bright conditions I will temporarily enable auto brightness sometimes. Otherwise I find it useless and generally too bright.

Question Oled screen bug?

So there's one thing I'm not understanding and I think it's a software bug. We all know that what makes an oled screen special is its capability to turn off pixels to represent the black color... so here's the problem.
I noticed that in a certain range of brightness level (around 20% and 35%) the display "turns" into an LCD display because is no longer able to turn off pixels to represent the black color.
I'm gonna attach 3 I took with my brother's smartphone, so about it:
I used a black photo (a completely black one) on my smartphone to show it.
First photo: I was using the brightness level the lower possible. Everything seems fine.
Second photo: You can see the problem, the black is no longer black anymore. It happens when the brightness level is around 20% and
35% (sorta).
Third photo: The brightness is at its maximum possible point and you can see the black parts returned off (it looks gloomy but it's because of the camera).
I have the same, "oreo colorizer" there is a program that forcibly changes the color range to dci p3 , it solves the problem but I don't like the colors when it is active

Categories

Resources