Database Info

[ROM][7.1.2][FINAL] CodeOfHonor's OmniROM 7.1 for Huawei P8 Lite 2017

OmniROM is our Android custom ROM variant, feature-packed but always with stability as #1 priority in mind.
Based on the Android Open Source Project (AOSP) and enriched by our developers with lots of custom enhancements, OmniROM has set out to give you a great Android experience on your mobile.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]P8 Lite 2017.
[*]P9 Lite 2017.
[*]P10 Lite.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP, flash my latest build to avoid error 7 from here.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
tell me.
Downloads:
Code:
[B][I]**21/05/2018**[/I][/B]
[LIST]
[*][URL="https://www.haky86.com/2018/05/21/omnirom-nougat-hi6250/"]From Haky's Blog[/URL]
[/LIST]
Changelogs:
Code:
[B][I]**21/05/2018**[/I][/B]
[LIST]
[*]re-works
[/LIST]
Source Code:
Device Tree:
https://github.com/hak86/android_device_huawei_hi6250
Kernel GPL:
https://github.com/hak86/android_kernel_huawei_prague
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
OmniROM for PRA-LX1, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, Meticulus
Source Code: https://github.com/hak86?tab=repositories
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 5.x "C432B161"
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-01-17
Created 2018-01-17
Last Updated 2018-01-17

ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

*reserved v2*

Download Link is not working
Edit: There is a " in the end of the link that shouldn't be there.. Maybe you should edit the link

Zillinda said:
Download Link is not working
Edit: There is a " in the end of the link that shouldn't be there.. Maybe you should edit the link
Click to expand...
Click to collapse
fixed

I have a totally weird issue on this ROM. I don't have this issue on any of your ROMs except this one.
When i use your vendor my SIM Card is not detected (even if i disable Dual Sim and reboot)
But the weird thing is, when i flash my stock vendor from P10 Lite the Sim is working BUT the sound is not working.
I flashed this one like every ROM from you, and every ROM worked but not this one :/
Are you using the latest Code of Meticulus? Because i had this issues with earlier builds of Meticulus' ROMs
Except that everything works fine. I will go back to your fully working SlimROM until you release AOSPExtended.

Zillinda said:
I have a totally weird issue on this ROM. I don't have this issue on any of your ROMs except this one.
When i use your vendor my SIM Card is not detected (even if i disable Dual Sim and reboot)
But the weird thing is, when i flash my stock vendor from P10 Lite the Sim is working BUT the sound is not working.
I flashed this one like every ROM from you, and every ROM worked but not this one :/
Are you using the latest Code of Meticulus? Because i had this issues with earlier builds of Meticulus' ROMs
Except that everything works fine. I will go back to your fully working SlimROM until you release AOSPExtended.
Click to expand...
Click to collapse
In your case you must edit the /vendor/phone.prop file
* search for [0X3B412000]
* and make sure to set the following string.
persist.radio.multisim.config=single
persist.dsds.enabled=false
* save and reboot.
you get this problem because my vendor.img is designed to run with single sim devices only.
AOSPE will be available after AOSPA Paranoid, isn't available on any hi6250 device as I see.
Edit: remove persist.radio.multisim.config=single, save and reboot.

haky 86 said:
In your case you must edit the /vendor/phone.prop file
* search for [0X3B412000]
* and make sure to set the following string.
persist.radio.multisim.config=single
persist.dsds.enabled=false
* save and reboot.
you get this problem because my vendor.img is designed to run with single sim devices only.
AOSPE will be available after AOSPA Paranoid, isn't available on any hi6250 device as I see.
Edit: remove persist.radio.multisim.config=single, save and reboot.
Click to expand...
Click to collapse
Thanks, i will try it now.
But why don't i have this issue with your other ROMs?

Zillinda said:
Thanks, i will try it now.
But why don't i have this issue with your other ROMs?
Click to expand...
Click to collapse
it's releated to vendor.img partition since it's designed to run on single sim.. just fix the flags I wrote and will get fixed.
a thing you should do manually on dual sim phones.

haky 86 said:
it's releated to vendor.img partition since it's designed to run on single sim.. just fix the flags I wrote and will get fixed.
a thing you should do manually on dual sim phones.
Click to expand...
Click to collapse
I get error, that it's Read-Only File system and if i want to change the permission of the file with Root Browser it says Changing permissions was not successful. Both the Editor and the Root Browser have root permissions.
Edit: i see the file is symlinked to /hwvendor/phone.prop so i edited it inside there but it's still not working

Zillinda said:
I get error, that it's Read-Only File system and if i want to change the permission of the file with Root Browser it says Changing permissions was not successful. Both the Editor and the Root Browser have root permissions.
Edit: i see the file is symlinked to /hwvendor/phone.prop so i edited it inside there but it's still not working
Click to expand...
Click to collapse
set via adb shell and tell us if fixed
setprop persist.radio.multisim.config single
setprop persist.dsds.enabled false

haky 86 said:
set via adb shell and tell us if fixed
setprop persist.radio.multisim.config single
setprop persist.dsds.enabled false
Click to expand...
Click to collapse
nope, i don't know if i am too stupid or if it's really not working, but none of this methodes is working.

Zillinda said:
nope, i don't know if i am too stupid or if it's really not working, but none of this methodes is working.
Click to expand...
Click to collapse
well, as you see it's working for me in screenshots.

I finally got it working by replacing the /hwvendor/phone.prop file from my STOCK vendor into the vendor of @haky 86.

@haky 86
Intalled the C432B161 firmware, then proceed to flash this rom with your instructions, everything works except video recording on camera, also for whatsapp, facebook, messenger, etc
Any hints ? Maybe I missed something

rubentkato77 said:
@haky 86
Intalled the C432B161 firmware, then proceed to flash this rom with your instructions, everything works except video recording on camera, also for whatsapp, facebook, messenger, etc
Any hints ? Maybe I missed something
Click to expand...
Click to collapse
Enable Google H264 in Settings -> Extra
Sent from my hi6250 using XDA Labs

Zillinda said:
Enable Google H264 in Settings -> Extra
Sent from my hi6250 using XDA Labs
Click to expand...
Click to collapse
Already did that and reboot the phone, but the problem persist.
[/ATTACH]

rubentkato77 said:
Already did that and reboot the phone, but the problem persist.
[/ATTACH]
Click to expand...
Click to collapse
what is your device?also did you flash my vendor partition?

haky 86 said:
what is your device?also did you flash my vendor partition?
Click to expand...
Click to collapse
I bought it as P9 Lite 2017 PRA-LX3C69B110 branded from Telcel Mexico, then converted PRA-LX1C432B110 dual sim unbranded and got updated to B170.
Then unlock bootloader, instal your latest TWRP, follow your unbrick guide fro C432B161.
Then flash omni ROM + pico gapps.
In some point I didn flash your vendor img (how did I miss that !#@$!) do I needto flash it again before omni rom or after?
Regards. :good:

rubentkato77 said:
I bought it as P9 Lite 2017 PRA-LX3C69B110 branded from Telcel Mexico, then converted PRA-LX1C432B110 dual sim unbranded and got updated to B170.
Then unlock bootloader, instal your latest TWRP, follow your unbrick guide fro C432B161.
Then flash omni ROM + pico gapps.
In some point I didn flash your vendor img (how did I miss that !#@$!) do I needto flash it again before omni rom or after?
Regards. :good:
Click to expand...
Click to collapse
well yes, you have to flash my own vendor from unbrick guide!
but before doing that pull /vendor/phone.prop from converted firmware and paste into system/vendor/ to avoid sim problems.
as you see my screenshot the camera is fully works without enable google codecs.

[07/19/2020][9.X] Android Open Source Project Pie Huawei P8 Lite 2017

About the Android Open Source Project
Android is an open source software stack for mobile devices and a corresponding open source project led by Google. This site and the Android Open Source Project (AOSP) repository offer the information and source code needed to create custom variants of the Android stack, port devices and accessories to the Android platform, and ensure devices meet the compatibility requirements that keep the Android ecosystem a healthy and stable environment for millions of users.
BUGS:
TELL ME.
sdcard that I will fix in next build.
GAPPS:
Click here to download this gapps.
Downloads:
09/05/2020
aosp-9-20200508-prague-haky86.zip
Fix gapps issue.
Fix hwc thanks to Flex1911.
I forget to include NFC fix, just flash Treble's module.
19/19/2020
aosp-9-20200716-hi6250-haky86.zip
Restart works.
Fix Google Play errors:
Go to Settings.
Open Apps.
Search for Google Play Store and Google Play Services.
Give the permissions especially to storages to get Play Store worked correctley.
XDA:DevDB Information
Android Open Source Project Pie for HI6250 Emui 8.x based, ROM for the Honor 8 Lite
Contributors
haky 86, flex1911
Source Code: http://github.com/hak86
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-11-18
Beta Release Date: 2018-11-18
Created 2018-11-18
Last Updated 2019-11-14

** Note **
reserved:
topic will be reopened once download is uploaded
Edit: rom uploaded

Any experience with this?

dtrail1 said:
Any experience with this?
Click to expand...
Click to collapse
same as other roms, I simply remove kirin970 stuff.

I'm assuming Gapps are not included?

verntechguy said:
I'm assuming Gapps are not included?
Click to expand...
Click to collapse
Nope isn't included. I will use this thread as unique place for all my Pie ROMs.

haky 86 said:
Nope isn't included. I will use this thread as unique place for all my Pie ROMs.
Click to expand...
Click to collapse
Thanks for the info. So opengapps should work right? How about Magisk? Standard version should work?

verntechguy said:
Thanks for the info. So opengapps should work right? How about Magisk? Standard version should work?
Click to expand...
Click to collapse
for gapps I recommend pico, since it is "demo" build for nfc you have to flash magisk module, for magisk use 17.1 and up also don't forget to install the manager application.

haky 86 said:
for gapps I recommend pico, since it is "demo" build for nfc you have to flash magisk module, for magisk use 17.1 and up also don't forget to install the manager application.
Click to expand...
Click to collapse
My variant doesn't have nfc so I don't have to worry about that. Will try this out once I'm free. Thanks for your work!

** Breaking News **
AOSP Extended is HERE
08/11/2018:
AospExtended-v6.0-hi6250-20181108-1232-UNOFFICIAL.zip
Bugs: media works just via VLC application or similar, I will fix in next build.
Don't forget to do the following things:
1-)Reboot in TWRP and mount system, vendor and splash2 partitions.
2-)Run the following command from terminal: /sbin/sh /system/bin/releasetools.kirin970.sh
3-)Flash eRecovery and do factory reset to boot the rom properly. P.S: if boot with a fully worked twrp you don't need to flash stock eRecovery.
No screenshots? I forget to save them but see the one in the attached files
Telegram: https://t.me/HakyGSI

** Note **
AOSP has been updated
aosp-pie-9.0.0_r16-hi6250-090112018.tar.gz
Android 9.0.0 R16.
Hotspot fixed.
NFC fixed properly.
Don't forget run releasetools.kirin970.sh script via twrp to boot the whole rom.

cookremier said:
Dates doesn´t match to the files in the main post.
Look at this:
AOSP Extended:
18/11/2018:
AospExtended-v6.0-hi6250-20181108-1232-UNOFFICIAL.zip
Do you live in the future with a Flux Compensator ???
Click to expand...
Click to collapse
yes, I'm coming from the future .
it just a typo's error

Any other recommendation before flashing your Image? Tried it by coming from EMUI 8 but got sparse error after flashing system.img in fastboot.

pete80pro said:
By following your Tutorial I'm gettin error message on flashing System.img with fastboot.
I have to be on EMUI 8 before, any other needed things?
Click to expand...
Click to collapse
Flash phh's aosp 9 without wiping emui 8 system partition then try mine. in case not working wait next build then
I manage to boot LineageOS 16.0, I will fix error 7 here too and upload first beta in separate topic.

Good for daily use ? P10 Lite

cxyqqz said:
Good for daily use ? P10 Lite
Click to expand...
Click to collapse
Yes but I have to fix fastboot error first.
Anyways LineageOS 16.0 cancelled, sometime boot and some time doesn't boot. I'm start getting bored of from Emui 8.x and back to emui 5.x developments that are better in certain sense.

P20 Lite ane-lx support?

A_S_A113 said:
P20 Lite ane-lx support?
Click to expand...
Click to collapse
yes it is, the next image of AOSP 9 with fastboot fix will come out in next hours.

haky 86 said:
AOSP Extended is HERE
08/11/2018:
AospExtended-v6.0-hi6250-20181108-1232-UNOFFICIAL.zip
Bugs: media works just via VLC application or similar, I will fix in next build.
Don't forget to do the following things:
1-)Reboot in TWRP and mount system, vendor and splash2 partitions.
2-)Run the following command from terminal: /sbin/sh /system/bin/releasetools.kirin970.sh
3-)Flash eRecovery and do factory reset to boot the rom properly. P.S: if boot with a fully worked twrp you don't need to flash stock eRecovery.
No screenshots? I forget to save them but see the one in the attached files
Telegram: https://t.me/HakyGSI
Click to expand...
Click to collapse
What do you mean by flashing erecovery, you mean stock recovery right? (recovery ramdisk)

steven360 said:
What do you mean by flashing erecovery, you mean stock recovery right? (recovery ramdisk)
Click to expand...
Click to collapse
yes stock recovery, it is needed just to wipe data & cache. the releasetools.kirin970.sh can be flashed by twrp post rom installation by /sbin/sh in shell.

[ROM] Sudo Rom [v1.1] [STABLE]- For Galaxy C7 & C7 Pro [22-Jun-21]

Sudo Rom
​
No , This Rom *Can Not* Be Used For Further Development Without My Permission . ​
Click to expand...
Click to collapse
Disclaimer​
I am not responsible for bricked devices, dead SD cards, or any malfunction caused by carelessness. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you ! If it works and you are satisfied then I will claim all credits without leaving one
Click to expand...
Click to collapse
Aim ​
This Rom Was/Is Mainly Built For Performance & As A Common Base For Sd 626/625 . :laugh:​
Click to expand...
Click to collapse
Rom Features​
High Performance In A Lite Package
Rebase From Latest Firmware
Pre Rooted & Safety Net Pass
Fully Patched & Permissive Eulah Kernel
Removed Unwanted Encryption & Stuff
ButterSmooth UI
Added Several Features
Yuva Features Made Optional
Completely Deodexed & Debloated (Optional)
Several Tweaks In System Props
Added Many Optional Mods
Added Navigation Bar (Optional)
Comes With Aod & Google Services
New Aroma Installer Theme With Cleaner Layouts
Unified Framework
And Several Other Things That I Never Mentioned
# Read This Post For More Details About Features​
Click to expand...
Click to collapse
Sections/Parts Of Thread​
1) Steps For Installation (Scroll Down)
2) Supported Devices, Bugs & Fix
3) Downloads & Changelog
4) Credits & Support Groups
5) Q/A​
Click to expand...
Click to collapse
Steps For Installation & Notes ​
1) Make sure you have the latest Bootloader
For more information on how to Flash latest Bootloader for C7/C7 Pro, follow the steps mentioned in this thread -
Latest Bootloader Flashing Guide
2) Make sure you have the latest TWRP recovery installed
For more information on how to install latest Twrp for C7/C7 Pro follow the steps mentioned in this thread -
TWRP Recovery Guide
3) Download the rom and transfer it to your Device
Download The Latest Version Of Sudo Rom Package & Move A Copy Of The Package To Your SD Card -
Download Section
4) Make sure OEM is unlocked in developer settings
There are three ways to unlock bootloader -
1) To unlock OEM , Go to (settings/about phone/software information) and tap on "build number" 4 times , then go back to settings and you will see "developer options after "about phone" . Click on "developers option" and you will see and option called "OEM Unlock" select/turn that on .
2) Type "adb reboot bootloader" (without the quotes) in adb shell and accept the adb request in your device,
Then type "fastboot flashing unlock" or "fastboot oem unlock" (without the quotes) and press vol up if any prompt displayed
3) In case you dont have OEM Unlock in developers option, then follow this guide -
Oem Unlock Guide
5) Make sure you have at least 15%+ battery left
6) Boot your phone to Twrp recovery
There Are 2 Way To Boot To Recovery -
1) By Holding The (Power Button + Volume UP Button + Home Key) When The Device Is Switched Off
2) By Typing "adb reboot recovery" (Without quotes) in adb shell
7) Do a FULL Data Format : (Twrp/Wipe/Format Data ) (Is A Must due to partition encryption)
& If You Want Performance That I Mentioned Then You Must Do It Although I Have Added An Cleanup Script, Manual Format Is Must If You Want The Performance That I Am Talking About
Note : All your files from Internal Storage Will Be Deleted . So take a backup and place the rom in your SD Card, Otg or (copy the rom package from backup / PC to internal storage after formatting data incase you dont have a Sd Card)
8) Flash Sudo Rom
Drop the Rom Package (Sudo Rom.zip) into your device (If Not Done Yet) & Locate ("Sudo Rom.zip") in the location where you have kept it and install it (TWRP/INSTALL/<location where the rom is> ---SWIPE TO INSTALL)
Note : After Following All The Steps, You Should See The Sudo Rom Splash Logo . There After The Aroma Installer Will Guide You
9) Install Fix/Patch If Available
Now after installing the Rom / Installer setup, Place the fix file (If provided for a specific version of Sudo rom) in Your Device and locate it in your storage (via twrp) and flash it . (TWRP/INSTALL/<location where the Fix is>/ ---SWIPE TO INSTALL)
10) Reboot To System
Note : Wait patiently After Rebooting From TWRP After Installing The Rom... There Might Be 1-3 Bootloops during the First boot & It may take A While To Boot to system (7-15 min), After Setting up system make sure to reboot atleast 3 times to make butter smooth ​
Click to expand...
Click to collapse
& The Last Step Is To Hit That Thank Button :good:​
XDA:DevDB Information
Sudo Rom, ROM for all devices (see above for details)
Contributors
jesvi
Source Code: https://github.com/jesvijonathan/Sudo-Rom-SM-C701F
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Bootloader, Twrp Recovery, Brain & Time
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: v1.1
Stable Release Date: 2019-10-05
Created 2019-10-04
Last Updated 2021-6-22

Supported Devices & Bugs - ​
Galaxy C7 Pro
-SM-C701F
-SM-C7010
-SM-C7018​
Click to expand...
Click to collapse
Galaxy C7
-SM-C7000
(C7000 users flash v1.0 patch to get it working correctly, else camera, bluetooth, etc might not work on boot,
Note : Only C7000 users ! C7-pro users can install/boot the rom without the patch as usual)​
Click to expand...
Click to collapse
Dont Forget To Hit The Thank Button :good:​

Downloads : ​
Sudo Rom v1.0 Patch/Fix (*For C7 Only) [22-Jun-2021] (400MB)
Sudo Rom v1.0 [5-Oct-2019] (1.5GB)​
Click to expand...
Click to collapse
Changelog : ​
v1
~Initial Release~​
Click to expand...
Click to collapse
Don't Forget To Hit That Thank Button :good:​

CREDITS -​
*corsicanu (My Mentor/Teacher)
*jesvi (For Creating This Entire Rom)​
Click to expand...
Click to collapse
C7 / C7 Pro Support Groups -​
Telegram Discussion Group :-
https://telegram.me/eulah_rom​
Click to expand...
Click to collapse
Donations -​
paypal.me/jesvijon​
Click to expand...
Click to collapse
Hit That Thank Button :good:​

Q/A-​
Q1) Can I Dirty Flash Sudo Rom Over Other Roms ?
It Is Highly Recommended To Format Data But Still If You Wanna Dirty Flash, You Can Upgrade From Other Custom Roms (Of Any Version Of Android) & Not From *Official Stock Rom*
Q2) Why Is My Device Is Stuck On The Splash/Boot Logo ?
Possibilities are :
* you might have not flashed the latest bootloader
* you might have flashed some other zip file before first boot
* you might have flashed magisk v19.3 or higher versions
* you might have modified some stuff
* etc
Post a comment if the above is not whats going on
Click to expand...
Click to collapse
Don't Forget To Hit That Thank Button :good:​

Also Check Out - Eulah Rom & Sudo Lite Rom If You Haven't Already
(& Plz Dont Tag The Main #1 Post Of The Thread, Instead Tag This Post Or Just Submit A Quick Replyv​
Click to expand...
Click to collapse

Best light rom for c7 works smooth

smooth and stable
this rom is perfect, lite version is all i needed, very stable and butter smooth rom, thnk you developer for making this rom for us.

phenodev said:
Best light rom for c7 works smooth
Click to expand...
Click to collapse
rahul0009 said:
this rom is perfect, lite version is all i needed, very stable and butter smooth rom, thnk you developer for making this rom for us.
Click to expand...
Click to collapse
Thank you guys for your support
Up Next : Eulah Rom v3.0

this rom is perfect, lite version is all i needed, very stable thank you and keep going ??

Ahmed_Salahh said:
this rom is perfect, lite version is all i needed, very stable thank you and keep going
Click to expand...
Click to collapse
Hope You Like It

Turkish language support
Is there any Turkish language support

onurbora said:
Is there any Turkish language support
Click to expand...
Click to collapse
Sudo Rom actually supports a heck lot of languages other than the regular one's, ill add more in the future

Sudo Lite Rom
​
Aim :
To provide a super stable version of sudo rom in a extremely light package
Click to expand...
Click to collapse
----------------------------​
Feautures :
*Super Lite Package
*Full C9 Pro Port For C7 Pro
*Fastest Boot Speed Ever On C7 Pro
*Minimum Bloat, Only Important System Apps Included
*Lite & Bugless Environmnt
*Magisk & BusyBox Included
*Patched Kernel & Removed Unwanted Encryption
*Simple Installation
*Semi Deodexed
*Gives You Sudo Access
Click to expand...
Click to collapse
--------------------------​
Supported Devices :
C7 Pro :
*C701F
*C7010 ( ZH & CH csc Not Included)
Click to expand...
Click to collapse
---------------------------​
Bugs
~None
Click to expand...
Click to collapse
---------------------------​
Downloads :
Sudo Lite Rom V1 [22-10-2019] (1.2gb)-
Click to expand...
Click to collapse
Changelog
~Initial Build
Click to expand...
Click to collapse
-------------------------​
Notes :
*There Is No Native Blur In This Eom For C7 Pro Devices, Which C9 Pro Has & Thats Coz
1)I I Super Hard Bricked My Device On Adding Terble Support, Now i Cant Debug Or Do Anything For C7 Pro's Development
2) Does Not Have Supported Libs For Native Blur
If Any One Is Interested In Adding Native Blur Support, Feel Free To Pm Me Ill Give You The Port Files
*This Rom Has Very Limited Bloats So If You Want To Add Back Any Other Apps, Pm Me
*ZH & CH csc (for china users) is not included but still the rom should work fine
*This Rom Can Be Shrunken To About 900mb But It Will Miss Vital Apps & Features
​
Click to expand...
Click to collapse
------------------------
Dont Just Say Thanks, Hit The Thank Button :good:​

Hi, I wanna increase my battery life, I don't play games much and I use social apps (Twitter, Instagram etc), should I use this rom or is the original rom better for me? Or if not this rom, which rom do you recommend to me? Thanks

oguzfb said:
Hi, I wanna increase my battery life, I don't play games much and I use social apps (Twitter, Instagram etc), should I use this rom or is the original rom better for me? Or if not this rom, which rom do you recommend to me? Thanks
Click to expand...
Click to collapse
Both Are Equally Great, Give Both The Roms A Try And Let Me Know Which One suite You
Still, I Would Reccomend You Sudo Rom (Original) Coz The Lite Version Is a C9 Port Which Has Its Own Benefits
(Also There Is Eulah Rom Apart From These Two Rom)

jesvi said:
Both Are Equally Great, Give Both The Roms A Try And Let Me Know Which One suite You
Still, I Would Reccomend You Sudo Rom (Original) Coz The Lite Version Is a C9 Port Which Has Its Own Benefits
(Also There Is Eulah Rom Apart From These Two Rom)
Click to expand...
Click to collapse
Ok, my device is already 2 years old so its battery is started to die, but I'll give a try to sudo, thanks for the answer

how can i uninstall Navigation Bar without re-flashing or without losing any Data??

shahzeb khattak said:
how can i uninstall Navigation Bar without re-flashing or without losing any Data??
Click to expand...
Click to collapse
Re-flash the rom and select "do not wipe" option in the (Wipe Menu) in Aroma Installer
If you are still using my rom(s) without giving/hitting the Thank Button,
DO IT NOW !

jesvi said:
Thank you guys for your support
Up Next : Eulah Rom v3.0
Click to expand...
Click to collapse
When is it going to be released?

GSI in G7 Play XT1952-2

I found two GSI ROMs that work on this device.
BUGS: No fingerprint, no Moto Actions, no Root and Notch is Bugged because of rounded screen format.
Pixel Experience (android 10 with Gapps)
https://sourceforge.net/projects/ex..._A64AB-10.0-20200118-2235-GSI.img.xz/download
After starting, the Home button and multi tasks may not work, so that they work, go in the same CMD window and type the two commands with the phone on
Code:
adb shell settings put secure user_setup_complete 1
adb shell settings put global device_provisioned 1
Lineage 17.1 (Android 10)
https://sourceforge.net/projects/an...111-UNOFFICIAL-treble_a64_bvN.img.xz/download
or https://mega.nz/#!2w4jUYhC!1WcMFrfLcBGfUZe3JO3mZoznnHn6fi7bqZRcaykmhWA
OmniROM (Android 10)
https://sourceforge.net/projects/am...91231-a64-ab-vanilla-HOMEMADE.img.xz/download
or https://mega.nz/#!WwxDkATI!oftoebkw3rjXQ-Q3UCCbZu8OBSvNWpVEqHtPnHk_STM
Havoc Os (Android 10)
https://sourceforge.net/projects/ex....0-20191117-A64-AB-Unofficial.img.xz/download
or https://mega.nz/#!b8BBhKQB!gLntS4Y-iyoJ4aRdBZaqFtNJmhlmA9IffSQt8ssmVvk
Dirty Unicorns (Android 10)
https://drive.google.com/a/turbox.uk/uc?id=16hrgD2c4gJpmz8O42j3V3E641CrxsNzN&export=download
or https://mega.nz/#!XsQ3RK6b!Um1f3kU23epkEMagSCGKveT716zwoRga94mgaOBHXpc
Ressurection Remix(Android 9)
https://sourceforge.net/projects/de...s/RR-P-v7.0.3-20191112-A64-AB.img.xz/download
or https://mega.nz/#!ml4QHSzI!7_Oha6-0ekc4gB6gLu8W8ZQAUuji1k_z4-lXgIBFE3o
DotOs (Android 9)
https://sourceforge.net/projects/do...4_ab-UNOFFICIAL-20190918-0616.img.xz/download
or https://mega.nz/#!Tp5GXYwR!HlHwrMSuhpppPCt7lw27hQ-zR75jrTs_l8uwRIHqDnw
Descendant 4.0.1 (Android 9)
https://androidfilehost.com/?fid=6006931924117932459
or https://mega.nz/#!O9oQgY7C!lB88dsc440I0XxMArJpooS5DJaH1xKCQibnxpsu5QYw
Lineage 17.0 (Android 9)
https://mega.nz/#!GhI3WKiC!Iypb7LdJuLHB3SM2tf-4EqemsVCI7Qztn8q1AsN9Pd4
Steps:
1 - Unlock bootloader
2 - Connect the phone in fastboot mode
3 - Type in CMD
to identify the device
Code:
fastboot devices
to wipe memory and erase data
Code:
fastboot -w
to flash the ROM GSI
Code:
fastboot flash system system.img
Example:
Code:
fastboot flash system "D:\MOTO G7\GSI ROM\dotos.img"
4 - Then on the fastboot screen click on START and wait for the system to start.
Rom upload time: 2 minutes
Time to start the system: 3 to 5 minutes
If you are unlucky and the system does not start, try the other ROM. If neither works you will have to reinstall the Motorola ROM using the RSD Lite program.
https://forum.xda-developers.com/attachment.php?attachmentid=4836953&stc=1&d=1570385530
https://forum.xda-developers.com/attachment.php?attachmentid=4836955&stc=1&d=1570385578
Credits:
Moto G7 Play Telegram Group - https://t.me/motog7play
ashu7073 - https://forum.xda-developers.com/pr...ed-device-development/9-0-dot-os-3-0-t3952035
Dil3mm4 - https://forum.xda-developers.com/pr...escendant-android-pie-custom-rom-ver-t3840578

filipedonato said:
I found two GSI ROMs that work on this device.
BUGS: No fingerprint, no Moto Actions, no Root and Notch is Bugged because of rounded screen format.
DotOs arm ab binder64
https://sourceforge.net/projects/do...4_ab-UNOFFICIAL-20190918-0616.img.xz/download
Descendant 4.0.1 arm ab binder64
https://androidfilehost.com/?fid=6006931924117932459
Steps:
1 - Unlock bootloader
2 - Connect the phone in fastboot mode
3 - Type in CMD
to identify the device
to wipe memory and erase data
to flash the ROM GSI
Example:
4 - Then on the fastboot screen click on START and wait for the system to start.
Rom upload time: 2 minutes
Time to start the system: 3 to 5 minutes
If you are unlucky and the system does not start, try the other ROM. If neither works you will have to reinstall the Motorola ROM using the RSD Lite program.
https://forum.xda-developers.com/attachment.php?attachmentid=4836953&stc=1&d=1570385530
https://forum.xda-developers.com/attachment.php?attachmentid=4836955&stc=1&d=1570385578
Credits:
Moto G7 Play Telegram Group - https://t.me/motog7play
ashu7073 - https://forum.xda-developers.com/pr...ed-device-development/9-0-dot-os-3-0-t3952035
Dil3mm4 - https://forum.xda-developers.com/pr...escendant-android-pie-custom-rom-ver-t3840578
Click to expand...
Click to collapse
Vai dar certo mano, estamos juntos nessa.

Eliseu Fonseca said:
Vai dar certo mano, estamos juntos nessa.
Click to expand...
Click to collapse
im testing a android q gsi now ill keep you guys posted if im succesfull

Linuxassassin said:
im testing a android q gsi now ill keep you guys posted if im succesfull
Click to expand...
Click to collapse
did it work ? i have no luck with the Q roms

thenatti said:
did it work ? i have no luck with the Q roms
Click to expand...
Click to collapse
it bootloops at the moment ill try decrypting my phone maybe that will help ill keep you guys posted

Linuxassassin said:
it bootloops at the moment ill try decrypting my phone maybe that will help ill keep you guys posted
Click to expand...
Click to collapse
Android q is not bootable I was testing the phh aosp 10 gsi

I tested multiple gsi roms and it seems like any armbinder64 rom boots up just fine. Of course i didn't have time to test a lot of them. I installed a pixel experience rom with gapps and su. Everything works fine as far as i can tell. The notch is horrible

Savinu' said:
I tested multiple gsi roms and it seems like any armbinder64 rom boots up just fine. Of course i didn't have time to test a lot of them. I installed a pixel experience rom with gapps and su. Everything works fine as far as i can tell. The notch is horrible
Click to expand...
Click to collapse
here is a thread of gsi that i tested that work with the phone
https://forum.xda-developers.com/g7-play/development/gsi-images-g7-play-t3980807
Lol glad my thread is put to good use lol

New roms!

Development [ROM][Unofficial][pdx214][13] crDroidAndroid 13.0 - 2023-04-27

crDroid Android is a free firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
crDroid is based on the LineageOS & Android Open Source Project with extra contributions from many people within the Android community.
All the source code for crDroid is available in the crDroid GitHub repo
Basic requirements:
Unlock your bootloader, make sure you are on Android 13 firmware (tested over 61.2.A.0.410)
Make sure you can send and receive SMS and receive calls (also via WiFi and LTE, if possible). It would be better for you to get VoLTE/VoWiFi utilized once on stock to provision IMS
Currently tested on XQ-BQ52 (Global version)
Current build has no Gapps built-in so it's up to you either to stay Gapps-less or flash Gapps version you want (I would recommend NikGapps personally)
Make sure you have gone through the installation guide once before proceed!
Installation:
Flash additional partitions and recovery.
Download the following files from the download link:
dtbo.img
vendor_boot.img
boot.img
Connect your device to your PC via USB if isn't already
If your device is not already in fastboot mode, on the computer, open a command prompt (on Windows) or terminal (on Linux or macOS) window, and type:
Bash:
adb reboot bootloader
Flash the downloaded image files to your device by typing:
Bash:
fastboot --set-active=a
fastboot flash dtbo_a <dtbo>.img
fastboot flash vendor_boot_a <vendor_boot>.img
fastboot flash boot_a <boot>.img
Now reboot into recovery to verify the installation:
Bash:
fastboot reboot recovery
Installing ROM from recovery
Download the crDroid installation package that you would like to install from the download link
If you are not in recovery, reboot into recovery
Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
Return to the main menu
Sideload the crDroid package
On the device, select "Apply Update", then "Apply from ADB" to begin sideload
On the PC, sideload the package using:
Bash:
adb sideload filename.zip
Return to the main menu
(Optionally) If you want to install any add-ons (Gapps, Magisk..), click "Advanced", then "Reboot to Recovery", then when your device reboots, click "Apply Update", then "Apply from ADB", then "adb sideload filename.zip" those packages in sequence.
Once you have installed everything successfully, click the back arrow in the top left of the screen, then "Reboot system now"
Downloads:
https://sourceforge.net/projects/xperia5iii/files/crdroid13/
Device Trees & Kernel Source:
https://github.com/faust93/android_device_sony_sm8350-common
https://github.com/faust93/android_device_sony_pdx214
https://github.com/xperiaossdev/kernel_sony_sagami
Build Information
Device: Xperia 5 III (pdx214)
Build Type: Unofficial
ROM OS Version: 13
Kernel Version: 5.4.219-Krispy-v1.2
Kudos:
@Sakuu
@clfbbn

Changelog
2023-04-27:
- crDroid v9.4
- kernel side tuning and optimisations
2023-04-15:
- crDroid sources repo sync
- performance optimizations
- HW assistant button gestures fix: single, long, double click works and can be re-assigned

Geez, our first custom ROM! Thank you very much for your efforts :^)
Any list of what's working and not working?

Gray47Maxx said:
Geez, our first custom ROM! Thank you very much for your efforts :^)
Any list of what's working and not working?
Click to expand...
Click to collapse
My daily driver for about a week now. Haven't found any problems so far. Seems everything to be working. But for sure we need more testing..

faust93 said:
My daily driver for about a week now. Haven't found any problems so far. Seems everything to be working. But for sure we need more testing..
Click to expand...
Click to collapse
Neat! Based on stock, I guess?

Gray47Maxx said:
Neat! Based on stock, I guess?
Click to expand...
Click to collapse
Well, it's not GSI if that's what you meant. Closed source proprietary blobs are taken from stock ROM, otherwise just fully-fledged build from crDroid sources.

faust93 said:
Well, it's not GSI if that's what you meant.
Click to expand...
Click to collapse
Not exactly. There's an initiative called SODP which provides all the necessities and binaries to build anything you want. Alas, usually it's not stable enough, especially on newer devices with hard configurations (like with our periscope camera).
Anyway, gonna test crDroid today and report anything I'd find interesting or worth noting

Gray47Maxx said:
Not exactly. There's an initiative called SODP which provides all the necessities and binaries to build anything you want. Alas, usually it's not stable enough, especially on newer devices with hard configurations (like with our periscope camera).
Anyway, gonna test crDroid today and report anything I'd find interesting or worth noting
Click to expand...
Click to collapse
Aah, I see. It's my first SONY device so I'm not aware about all the nuances yet No, it's not SODP based build.

thanks very nice rom

Good work, btw might want to do a rebuild with the newest Krispy version, major speedups on the 1 III that's running Krispy-v1.2.1 plus some battery life improvement, maybe I'll do 5 III builds too, if I get any testers that is.

Just installed this. Feels like I've been waiting ages for a custom ROM, and now here it is!
So far it seems too good to be true, not a single issue yet.

Sakuu said:
Good work, btw might want to do a rebuild with the newest Krispy version, major speedups on the 1 III that's running Krispy-v1.2.1 plus some battery life improvement, maybe I'll do 5 III builds too, if I get any testers that is.
Click to expand...
Click to collapse
Will test later today. Curious to see if refresh rate can be locked @ 120hz. The GSI builds I tried on A11 and A12 were stuck at 60

bhow11 said:
Will test later today. Curious to see if refresh rate can be locked @ 120hz. The GSI builds I tried on A11 and A12 were stuck at 60
Click to expand...
Click to collapse
Of course you can lock that dunno if he added the stuff for the refresh rate qs tile though

Sakuu said:
Of course you can lock that dunno if he added the stuff for the refresh rate qs tile though
Click to expand...
Click to collapse
Just a prop edit?

bhow11 said:
Just a prop edit?
Click to expand...
Click to collapse
Not even that, i think you can turn it on from the settings, but qs tile is more convenient

All good thus far

Will google wallet work with this ROM?

dima_vy said:
Will google wallet work with this ROM?
Click to expand...
Click to collapse
For me it works. Magisk Delta does the trick.

After using it for a few days, it is very stable and smooth, the battery performance is also great, thank you for your efforts

Cannot get Photo Pro and other sony app running after install sony framework in Magisk delta. Any one else has the same issue?