This is the guide for those samsung phones without an official call recording inbuilt.
Summary:
Its simply a CSC feature. If your phone is originally from another country than India, you may not have an inbuilt call recording.
Samsung has disabled call recording function for most countries. But if you have device from one of the following countries, it should have call recording feature: Thailand (SPay), Vietnam (SPay), India (SPay), Israel, Algeria, Bangladesh, Libya, Egypt, Laos, Nepal, Sri Lanka and Tunis. If you'd like to change region, you need to change CSC code of your device.
I tried various call recording app but it all failed and its a hectic process without root. And if i root then it will trip knox and no futher official updates that i can install from the phone.
So the basic is to find the latest above mentioned country specific firmware of the device model and flash it.
Yes you can simply flash the CSC file only but just to be in safe side, i recommend you to flash the whole firmware and factory reset.
Warning:
1: Yes, the device will factory reset if you flash 4 firmware file from updato or sammobile or from anywhere else. So be aware.
2: It will also get FRP lock after the flash. So do signout all of your google and samsung accounts/ or remember them properly .
3: Please flash the latest release of the firmware. The device will not let you flash anything older and there will surely be an error while flashing.
4: Use the latest version of odin which is 3.14.1
I tried this on my A305f which was originally from Dubai. But currently im in Nepal and the phone had no call recording option. Flashed with latest Indian Firmware and inserted both sim. I got what i wanted.
Link to A305f Indian Firmware (Updato)
Google Drive Link (uploading Soon)
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
everyonesweird said:
This is the guide for those samsung phones without an official call recording inbuilt.
Summary:
Its simply a CSC feature. If your phone is originally from another country than India, you may not have an inbuilt call recording.
I tried various app but it all failed and its a hectic process without root. And if i root then it will trip knox and no futher official updates that i can install from the phone.
So the basic is to find the latest Indian firmware of the device model and flash it.
Yes you can simply flash the CSC file only but just to be in safe side, i recommend you to flash the whole firmware and factory reset.
Warning:
1: Yes, the device will factory reset if you flash 4 firmware file from updato or sammobile or from anywhere else. So be aware.
2: It will also get FRP lock after the flash. So do signout all of your google and samsung accounts/ or remember them properly .
3: Please flash the latest release of the firmware. The device will not let you flash anything older and there will surely be an error while flashing.
4: Use the latest version of odin which is 3.14.1
I tried this on my A305f which was originally from Dubai. But currently im in Nepal and the phone had no call recording option. Flashed with latest Indian Firmware and inserted both sim. I got what i wanted.
Link to A305f Indian Firmware (Updato)
Google Drive Link (uploading Soon)
Screenshots:
View attachment 4929207 View attachment 4929209 View attachment 4929211 View attachment 4929213 View attachment 4929215 View attachment 4929217
Click to expand...
Click to collapse
Flashing only the CSC file could cause a bootloop, a soft brick or a network problem?
Flashing a stock CSC file dont trigger the knox counter, right?
Will this work in Android 10 Nigeria?
Will this work in android 10 Nigerian version, I need that call Recorder badly
please someone share android10 csc from indian rom.
I dont want to download whole the indian rom.
Is this safe for Samsunga30
If i flashe on it.
Best Root app for call recording?
I have rooted with magisk. Which app works well with a30?
Any solution for pakistan i have A30s that is nor working woth third party app nither have built in call recording. Please help and resolve my problem.
Shihabus Sakib Rad said:
I have rooted with magisk. Which app works well with a30?
Click to expand...
Click to collapse
Download Axet Call recorder from here.
then, Install Axet Call recorder magisk module and enable call recording in the app (Don't change recording source)
Great
Related
N900XXUCMJ6_ FACTORY_FIRMWARE_ILO
Automatic FULL WIPE!!!
Composition zip:
Cache(CSC)
Bootloader
PDA
MODEM
ODIN 3.07
PIT
Warning!!!
Firmware consists of four parts, plus pit
Attention! All user data will be deleted during flash the firmware, including internal sdcard
After flash you will have clean device (factory condition) CSC - ILO
Can flash with PIT - Included in the firmware (The optional - required if damaged partition PIT)
[*]Region: (CSC): CEL;PCL;PTR;ILO.
Download
Download
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Service 4-F firmware file SER-N900XXUCMK2 for Russia
Full wipe data (Section DATA)
Contains new ZIP One 3.09.3
Leads to the state of the smartphone:
CURRENT BINARU: Samsung OFFICIAL
SYSTEM STATUS: OFFICIAL
Counter KNOX - after root, does not reset!
After it is possible to obtain update on OTA.
PIT file is embedded in the image, it puts in the field,, PIT,, it is not necessary!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://mega.co.nz/#!f9BxWSzK!O-3wPSJIeuhuIfwRYaPPmjxc4w1OmKxBE826sSCdAz8
Special Thanks
A.S._id
dell
Odexed or deodexed !!
does it mean that knox warranty restores?
any mirror?
Service 4-F firmware file SER-N900XXUCMK2 for Russia
https://mega.co.nz/#!f9BxWSzK!O-3wPSJIeuhuIfwRYaPPmjxc4w1OmKxBE826sSCdAz8
just flashed latest MK4 build Service 4-F firmware file SER-N900XXUCMK2 for Russia but
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
WARRANTY BIT: 1
update: did full wipe from settings and now binary and status are oficial but WARRANTY BIT is still 1.
Full wipe data (Section DATA)
Contains new ZIP One 3.09.3
Leads to the state of the smartphone:
CURRENT BINARU: Samsung OFFICIAL
SYSTEM STATUS: OFFICIAL
Counter KNOX - after root, does not reset!
After it is possible to obtain update on OTA.
PIT file is embedded in the image, it puts in the field,, PIT,, it is not necessary!
This firmware is used in case of problems with the device and not to clear the counters!
muratbaizhanov said:
just flashed latest MK4 build Service 4-F firmware file SER-N900XXUCMK2 for Russia but
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
WARRANTY BIT: 1
update: did full wipe from settings and now binary and status are oficial but WARRANTY BIT is still 1.
Click to expand...
Click to collapse
Sorry, but Warranty bit can't be reset mate. At least, not yet.
does it work for N900ZSUBMI5 Taiwan ?
Does it work of I Flash on Dr ketan rom v2? I come from India. Thanks!
Sent from my SM-N900 using XDA Premium 4 mobile app
hello
pls new link for download
https://hotfile.com/dl/253430936/4663831/N900XXUCMJ6__FACTORY_FIRMWARE_ILO.zip.html
thanks alot
what mean for russia
if i have internatinal
can i ?
i need hebrew
thanks
alexyuh said:
Full wipe data (Section DATA)
Contains new ZIP One 3.09.3
Leads to the state of the smartphone:
CURRENT BINARU: Samsung OFFICIAL
SYSTEM STATUS: OFFICIAL
Counter KNOX - after root, does not reset!
After it is possible to obtain update on OTA.
PIT file is embedded in the image, it puts in the field,, PIT,, it is not necessary!
This firmware is used in case of problems with the device and not to clear the counters!
Click to expand...
Click to collapse
and used to set the counter to 0?
Enviado desde mi SM-N900 mediante Tapatalk
My problem
What is problem. Thanks
NOTE 3 VN ROM V5.0 KitKat Android 4.4.2
Android rom yükleme, root etme, recovery flaşlama, bootloader işlemleri
Samsung, HTC, LG, Sony ve MTK Replika cihazlar
dreamnej said:
My problem
View attachment 2530658
What is problem. Thanks
Click to expand...
Click to collapse
i9505
This FW is for 900 only
Zer0r said:
i9505
This FW is for 900 only
Click to expand...
Click to collapse
thanks
All right. problems in 9005. No other problems with my phone ( 9000q no problem )
when will the Nordic Version or UK unlocked version will come out
pit
please pit add.
http://forum.xda-developers.com/showthread.php?t=2463036 not compatible ( I think ).
Hey there everyone,
I have a Samsung Galaxy SM J727P (Boost Mobile) - I am not quite sure what happened; however I sometimes power my phone off by pulling the battery. This time... at the very wrong time or the right time. I am guessing it was doing a system update; however I didn't select that and didn't get a notification.
When I powered it back up, it gave me an error and wouldn't boot.
I since then accidentally pressed some buttons and the screen loaded Android Recovery screen. I would flash it with ODIN however I don't want to lose any data. My SIM Card has my contacts I believe for the most part. I would like to save as much as possible.
Does anyone have any ideas what this error could mean for my data situation? I never once rooted this phone or changed stock ROM.
Here it is: (Also has cracked screen from running it over with my car):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you for your time and LORD Bless! :good:
Best Regards,
Brandon
csc Home
BrandonKastning said:
Hey there everyone,
I have a Samsung Galaxy SM J727P (Boost Mobile) - I am not quite sure what happened; however I sometimes power my phone off by pulling the battery. This time... at the very wrong time or the right time. I am guessing it was doing a system update; however I didn't select that and didn't get a notification.
When I powered it back up, it gave me an error and wouldn't boot.
I since then accidentally pressed some buttons and the screen loaded Android Recovery screen. I would flash it with ODIN however I don't want to lose any data. My SIM Card has my contacts I believe for the most part. I would like to save as much as possible.
Does anyone have any ideas what this error could mean for my data situation? I never once rooted this phone or changed stock ROM.
Here it is: (Also has cracked screen from running it over with my car):
Thank you for your time and LORD Bless! :good:
Best Regards,
Brandon
Click to expand...
Click to collapse
yes you need to dowmload the next firmware version an flash it threw odin but use the CSC Home file when do so flash all four files AP BL CP an the CSC Home file this should save your Data ! P.S IF you are rooted you will still have to reinstall twrp an Magisk after flashing firmware !
RE:
peter couniaz said:
yes you need to dowmload the next firmware version an flash it threw odin but use the CSC Home file when do so flash all four files AP BL CP an the CSC Home file this should save your Data !
Click to expand...
Click to collapse
peter couniaz,
Would you agree that "J727PVPU6BSF2" would be the next version to flash it to correctly from the existing J727PVPU4BRK4 version of firmware?
I found the following direct links to the above mentioned firmware:
AP:
androidfilehost dot com/?w=file-thanks&fid=818070582850488362&mid=254&download_id=ac2523d3c5746caecae78252005a1a0a&tid=1578746727&hc=a557bb807dd4fbbf33973d2e1e7b4779e2bbc3cc71ecb7ade855cf0892403cf0
BL:
androidfilehost dot com/?fid=673956719939815291
CP:
androidfilehost dot com/?fid=890129502657578821
CSC:
androidfilehost dot com/?fid=890129502657578822
Do you think these are the correct versions? I remember the Developers here on XDA were using these back in 2016-2017 and I never had a problem then.
Thanks again! :good:
~ Brandon
CSC home
BrandonKastning said:
peter couniaz,
Would you agree that "J727PVPU6BSF2" would be the next version to flash it to correctly from the existing J727PVPU4BRK4 version of firmware?
I found the following direct links to the above mentioned firmware:
AP:
androidfilehost dot com/?w=file-thanks&fid=818070582850488362&mid=254&download_id=ac2523d3c5746caecae78252005a1a0a&tid=1578746727&hc=a557bb807dd4fbbf33973d2e1e7b4779e2bbc3cc71ecb7ade855cf0892403cf0
BL:
androidfilehost dot com/?fid=673956719939815291
CP:
androidfilehost dot com/?fid=890129502657578821
CSC:
androidfilehost dot com/?fid=890129502657578822
Do you think these are the correct versions? I remember the Developers here on XDA were using these back in 2016-2017 and I never had a problem then.
Thanks again! :good:
~ Brandon
Click to expand...
Click to collapse
You may need to download from another site the J727PVPU6BSF2 will work but you need the CSC Home file to try to save your data !
Try this link
https://samfrew.com/model/SM-J727P/
Or try the sammobile site !
[SOLVED] Thanks peter couniaz
peter couniaz said:
You may need to download from another site the J727PVPU6BSF2 will work but you need the CSC Home file to try to save your data !
Try this link
samfrew dot com/model/SM-J727P/
Or try the sammobile site !
Click to expand...
Click to collapse
Thank you again peter,
I was able to solve this by doing as you said and using the following firmware:
samfrew dot com/download/Galaxy__J7__Perx__/tadn/BST/J727PVPU4BRK4/J727PSPT4BRK4/
NOTE: If you are using Boost Mobile and an American like myself; Don't hesitate using Regional Firmware: (BST). It's the Boost Mobile Branding that's the true differential.
I flashed with ODIN revision Current.13 and it worked wonderfully!
Best Regards,
Brandon :good:
Hello,
My old Galaxy S6 Edge (T-Mobile) began giving me this warning:
Security error: This phone has been flashed with unauthorized software & is locked.This happened after a low-battery shut-off of the phone. It was not in the middle of an update at the time.
I can get into recovery mode, but I don't want to reinstall and delete all the data (family photos, etc.) on this phone.
I have tried all the apps out there claiming to be able to backup a damaged phone (FonePaw, DroidKit, FoneLab, DrFone) with no luck. They did not work. After some research, it appears my only option is to download firmware from SamMobile (or Frija) and use Odin to reinstall.
However, I have seen conflicting reports that this will overwrite and delete my personal files! I want to avoid this, of course.
I read that as long as I am reflashing with the identical firmware originally installed on the phone, I will end up deleting my personal files. But I can't get into the phone to find what firmware version this is!
At this point I am stuck. Please help! Thank you.
I used the following information to bring me to this point:
My S10 has been flashed with an unauthorized software and is locked - Page 7 - Android Forums at AndroidCentral.com I saw that my S10 had an update, so I started updating my phone and a few moments later, I get this message with a green screen stating that my phone has been flashed with an unauthorized software and is locked, please contact my carrier. I had no idea what was going on, so I called Samsung and...
forums.androidcentral.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Patched Odin 3.13.1 For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
[Tool] Frija - Samsung firmware downloader/checker * * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7 SM-G930F In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy S7 (so: NO CUSTOM ROM's and/or ROOT-talk)... How to flash firmware to your phone: WARNING WARNING WARNING -> Before flashing, ACTIVATE PIN in "Secure...
forum.xda-developers.com
Download Samsung Galaxy S6 edge SM-G925T TMB USA (T-Mobile) firmware All Samsung firmwares for Galaxy S6 edge in USA (T-Mobile) with model code SM-G925T. We offer free and fast download options. Check them out now.
www.sammobile.com
Maybe someone has a plan but I think you're boned. Those online recovery services will encrypt data found making it unusable unless you pay them. Never use them.
The data is likely way lost.
Google may have saved some of it for you even if you disabled Transport Services at some point. After reloading see if it will restore anything.
Same for Samsung backup.
Always redundantly backup critical data to at least two hdds that are physically and electronically isolated from each other and the PC. NEVER encrypt data drives!
If you don't do this, sooner or latter you will lose data. Been there, done that
Thanks, Blackhawk. I was afraid of this.
Is there any truth to being able to avoid overwriting data if the same firmware edition is installed using Odin?
sentdab said:
Thanks, Blackhawk. I was afraid of this.
Is there any truth to being able to avoid overwriting data if the same firmware edition is installed using Odin?
Click to expand...
Click to collapse
I could be wrong.
If the data has been deleted it means the OS's record of it's place in the memory is deleted*.
Unless a separate app like Galaxy Store's File Guardian preserved it.
If you ran DrFone it's probably fubar for sure.
You can turn it off and research it more... nothing to lose except time.
*Even using the phone could overwrite the data as that memory space is now unassigned and freed for use if needed by the system.
Unless you can unlock the phone, it‘s hard to recover those files.
@sentdab
when you re-flash a ROM the partitions that holds the user-data aren't touched, unless you force a clean install. Typically user-data only get wiped if you do a Factory Reset.
jwoegerbauer said:
@sentdab
when you re-flash a ROM the partitions that holds the user-data aren't touched, unless you force a clean install. Typically user-data only get wiped if you do a Factory Reset.
Click to expand...
Click to collapse
So in theory I should be able to use Odin to flash *any* firmware version for my phone on this site https://www.sammobile.com/samsung/galaxy-s6-edge/firmware/SM-G925T/TMB/#SM-G925T without risk of deleting the user data (photos, videos, phone numbers, etc)? I downloaded the latest firmware package but it only contains one file:
G925TUVS6FRC1_G925TTMB6FRC1_G925TUVS6FRC1_HOME.tar
Which of the fields in Odin do I put this file in? BL, AP, CP, CSC? I am referring to a guide such as this one:
How to Use Odin to Flash Samsung Galaxy Stock Firmware
If you own a Samsung phone and enjoy rooting or modding your device, flashing official firmware can be very useful. Odin is Samsung's own internal program for loading such updates for testing purposes, and it's quite easy to use for your own custom modification needs.
android.gadgethacks.com
Thanks!
****Disclaimer : I am not responsible for any data loss or damage of the device.
Hi All,
I know everyone is frustrated that we are not able to change the CSC on Watch 4 Bluetooth version. I was keep on trying different methods and atlast i am able to change the CSC on my Watch 4 Bluetooth Model SM-R870. The funny thing is I tried all hard way and nothing succeeded. Finally find out a simple way to change the CSC.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Open the Samsung phone Dialer app on watch
2. Dial *#272*719434266344#
3. Accept the warning Menu
4. Change the CSC to MEA or SPAY supported Region (Its a one time change, be careful, you cant revert back to any other CSC)
5. Install and reboot
6. Select United Arab Emirates and reboot.
5. Done , Watch will be reset and Spay will be available once after pairing again with phone.
Please feel to thank me if its working.
Thanks,
TechDocAsia
Why have you spammed with essentially the same info on the same topic 3 times?
This is my result...
SM-R860
Firmware Version:
FVD4 crap
Seems not working for me...
Will test later again if maybe my fault...
Best Regards
73sydney said:
Why have you spammed with essentially the same info on the same topic 3 times?
View attachment 5628215this is the only thread i created, I have replied on other threads. Check the owner for other threads.
Click to expand...
Click to collapse
adfree said:
This is my result...
SM-R860
Firmware Version:
FVD4 crap
Seems not working for me...
Will test later again if maybe my fault...
Best Regards
Click to expand...
Click to collapse
also on my r870 it does not work I have the same firmware as you
marco_lu said:
also on my r870 it does not work I have the same firmware as you
Click to expand...
Click to collapse
What's your csc version?? Mine was R870OXM1FCV8(multiple csc version)
FVC8 is older as FVD4...
Maybe user with FVC8 can confirm working or not...
According to Google search this Code is since Tizen...
Best Regards
adfree said:
FVC8 is older as FVD4...
Maybe user with FVC8 can confirm working or not...
According to Google search this Code is since Tizen...
Best Regards
Click to expand...
Click to collapse
it doesn't work on EVA8 firmware either
ansaziz777 said:
****Disclaimer : I am not responsible for any data loss or damage of the device.
Hi All,
I know everyone is frustrated that we are not able to change the CSC on Watch 4 Bluetooth version. I was keep on trying different methods and atlast i am able to change the CSC on my Watch 4 Bluetooth Model SM-R870. The funny thing is I tried all hard way and nothing succeeded. Finally find out a simple way to change the CSC.
View attachment 5627771
1. Open the Samsung phone Dialer app on watch
2. Dial *#272*719434266344#
3. Accept the warning Menu
4. Change the CSC to MEA or SPAY supported Region (Its a one time change, be careful, you cant revert back to any other CSC)
5. Install and reboot
6. Select United Arab Emirates and reboot.
5. Done , Watch will be reset and Spay will be available once after pairing again with phone.
Please feel to thank me if its working.
Thanks,
TechDocAsia
Click to expand...
Click to collapse
One more warning
No s/w OTA updates after change of csc. You would remain on present version. No upgrades
Didn't work for me samsung galaxy watch 4 classic model SM-R890.
Highly recommend you do NOT do this
ansaziz777 said:
****Disclaimer : I am not responsible for any data loss or damage of the device.
Hi All,
I know everyone is frustrated that we are not able to change the CSC on Watch 4 Bluetooth version. I was keep on trying different methods and atlast i am able to change the CSC on my Watch 4 Bluetooth Model SM-R870. The funny thing is I tried all hard way and nothing succeeded. Finally find out a simple way to change the CSC.
View attachment 5627771
1. Open the Samsung phone Dialer app on watch
2. Dial *#272*719434266344#
3. Accept the warning Menu
4. Change the CSC to MEA or SPAY supported Region (Its a one time change, be careful, you cant revert back to any other CSC)
5. Install and reboot
6. Select United Arab Emirates and reboot.
5. Done , Watch will be reset and Spay will be available once after pairing again with phone.
Please feel to thank me if its working.
Thanks,
TechDocAsia
Click to expand...
Click to collapse
Bluetooth version GW don’t work this way to change CSC. The process is through Odin wifi and adb steps. Still no luck for me. Anyone changed successfully please share the process. Thanks in advance.
Tested self on SM-R870 with EVA8...
NO. Not working.
Best Regards
Can confirm that it worked for me and even updates are intact.
Video confirmation of Spay and Updates
ansaziz777 said:
****Disclaimer : I am not responsible for any data loss or damage of the device.
Hi All,
I know everyone is frustrated that we are not able to change the CSC on Watch 4 Bluetooth version. I was keep on trying different methods and atlast i am able to change the CSC on my Watch 4 Bluetooth Model SM-R870. The funny thing is I tried all hard way and nothing succeeded. Finally find out a simple way to change the CSC.
View attachment 5627771
1. Open the Samsung phone Dialer app on watch
2. Dial *#272*719434266344#
3. Accept the warning Menu
4. Change the CSC to MEA or SPAY supported Region (Its a one time change, be careful, you cant revert back to any other CSC)
5. Install and reboot
6. Select United Arab Emirates and reboot.
5. Done , Watch will be reset and Spay will be available once after pairing again with phone.
Please feel to thank me if its working.
Thanks,
TechDocAsia
Click to expand...
Click to collapse
Confirmed working like a charm and also got an update after changing csc. So update is also working..Also managed to add indian cards… Thanks a lot for sharing this
Maybe share old CSC...
For instance *#0808# Code is blocked for DBT...
But working for BTU and XAA confirmed...
Best Regards
Murali_ch21 said:
Bluetooth version GW don’t work this way to change CSC. The process is through Odin wifi and adb steps. Still no luck for me. Anyone changed successfully please share the process. Thanks in advance.
Click to expand...
Click to collapse
Check the video shared by @RajGopi
adfree said:
Tested self on SM-R870 with EVA8...
NO. Not working.
Best Regards
Click to expand...
Click to collapse
Is it OXM version??
Maybe this code is blocked on other firmwares.
ansaziz777 said:
Check the video shared by @RajGopi
Click to expand...
Click to collapse
Thanks for the update friend. My model is SM-R860 from Korea. Bluetooth version. Tried again but still it doesn't work.
If maybe this work on Device for India...
So IMHO INU is CSC
Example...
http://fota-cloud-dn.ospserver.net/firmware/INU/SM-R860/version.xml
OXM is NO active CSC...
I will try to investigate why Code *#0808# is blocked by active CSC DBT...
Maybe similar magic to your Code...
Best Regards
Hello everyone, I read that it was possible to change the last CSC on the right via the root (because as you know with the S22 when you go to EUX no update because of this last which does not change) However I do not know in which folder to go with root explorer for the change (I went in efs/IMEI but there is only the active CSC not the Activated id) if someone knows how to do I'm a taker.
Thanks in advance
hello
if you are familiar with qcn file , you can find it between NV items 7400 and 15000
Hi @yakapa40 thanks for the answer. Where do you find the QCN file in the root directory and is there a way to edit it ?
Thank in advance
1: with QPST /QFIL/Tools/QCN Backup Restore
2: with a NV items reader writter tool
3: EFS tool
if you are not familiar with these tools take care , you can brick your device and always backup original qcn or NV items files
Hello again, thank you very much for your help. Last question, which of these 3 tools would you recommend to edit my file ?
i have used all for old rooted devices
nv reader is the most simple
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi @yakapa40 , I think it does not work with recent smartphones (it puts me after connecting the com port and click on read that it has no response from the phone) thank you
have you enable DM port ?
or EDL with twrp
Samsung: Enter *#0808# in dialer, select any USB mode entry containing DM.
Korean models: Enter 3197123580 in dialer, password is either 996412, 776432, 0821.
Certain version of firmwares after 2018 are blocking the access to the hidden menu with the abovementioned code. Currently no solution is known without rooting the phone (correction wanted).
@yakapa40 i activated the qualcomm USB DM option via alliance however I do not see what you mean about the EDL is it mandatory?
I tried on my laptop and the same
Hello @yakapa40 , so you have no solution?
Thanks in advance
1: error with EDL ( it's not for Samsung device )
2: if you want more help to find NV items or qcn file , please we need more informations
( the tool you try which version ( QPST 2.7.xxxx )
screenshoot of *#0808# ( USB settings ) or *#7284# (USB I2C )
exemple :
alarme134 said:
Hello everyone, I read that it was possible to change the last CSC on the right via the root (because as you know with the S22 when you go to EUX no update because of this last which does not change) However I do not know in which folder to go with root explorer for the change (I went in efs/IMEI but there is only the active CSC not the Activated id) if someone knows how to do I'm a taker.
Thanks in advance
Click to expand...
Click to collapse
@alarme134 Glad you're trying to figure this out but are you sure this happens because the last ID? I saw many people with a different AID in EUX firmware and they still have OTA... At least from factory, without any change by the user.
Also I saw a post in Samsung community with guys from UK having problems to get their S22 configured with Spay because the phone was all EUX and came as a German ISO and they're were not able to get OTA too.. What is supposed to happen in this cases is a background setup depending of the SIM card... So maybe in our cases the setup is not being pushed too...
S22 Ultra Samsung Pay issue - CSC incorrectly locked to Germany
UPDATE: Its now going back to EE. They said they've had a fair few go back for this reason. Not a great start on a new device I'm getting fed up with this issue now. I've had no update at all since last week and the error report has come back to tell me the issue has been resolved and the...
eu.community.samsung.com
S22 Ultra CSC issue - Can't use Samsung pay because the device is locked to EUX
Can't use Samsung pay because the device is locked to EUX and the application thinks the device is in Germany because of it. Reboots don't work, putting sim back in etc don't work. Anyone else experiencing this issue? Will there be a fix for it?
eu.community.samsung.com
Hum ... so you say, if i change the CSC, but the last one will stay on the original, i don't get Updates?
Cause i imported an S908E to Austria, it was an STH (Singapure Starhub) device, i changed it to THL, to get rid of the Starhub Apps und get Call Recorder!
hi @tsilva30 , I'm aware of the iso mine is set to my country (France) I even made a YouTube video to change it. however it does not regulate updates because of the latest CSC on which EUX is based. Many operators send phones directly to EUX from the S22, example for orange in France which delivers these phones to EUX/-/EUX/FTM. and the updates are managed by Orange.... but me coming from a CSC Bouygues Telecom (BOG/BOG,BOG/EUX/BOG) when I put in EUX it does not find a correspondence to EUX/-/ EUX/BOG at the level of the update servers since Bouygues has a CSC apart..... So I'm looking to put my last CSC at EUX via the root to find the updates (and get them quickly).
Hi, @MultiCulti it seems to me that this only concerns the EUX CSC
@alarme134
Ah, ok, nah ... i will see it with the next update ... hopefully i get it
alarme134 said:
hi @tsilva30 , I'm aware of the iso mine is set to my country (France) I even made a YouTube video to change it. however it does not regulate updates because of the latest CSC on which EUX is based. Many operators send phones directly to EUX from the S22, example for orange in France which delivers these phones to EUX/-/EUX/FTM. and the updates are managed by Orange.... but me coming from a CSC Bouygues Telecom (BOG/BOG,BOG/EUX/BOG) when I put in EUX it does not find a correspondence to EUX/-/ EUX/BOG at the level of the update servers since Bouygues has a CSC apart..... So I'm looking to put my last CSC at EUX via the root to find the updates (and get them quickly).
Hi, @MultiCulti it seems to me that this only concerns the EUX CSC
Click to expand...
Click to collapse
I know. I already know that iso don't regulate updates you already told that in other post, that was not my point.
I'm saying that even phones that are coming from factory as original EUX don't get OTA updates if you don't insert a SIM card first to make a background setup for your country.
You can check this affirmation by seeing those posts I attached. So I'm wondering that in our case this setup is not happening too.
alarme134 said:
Hello everyone, I read that it was possible to change the last CSC on the right via the root (because as you know with the S22 when you go to EUX no update because of this last which does not change) However I do not know in which folder to go with root explorer for the change (I went in efs/IMEI but there is only the active CSC not the Activated id) if someone knows how to do I'm a taker.
Thanks in advance
Click to expand...
Click to collapse
Hi there, any news about EUX OTA's or about last ID?
Hello @yakapa40
I'm coming back to you to find out what persistent properties are and if a modification of the value of "persist.sys.prev_activatedid" from BOG to EUX, for example, would make it possible to change it
i don't know , but you can try to change persist.sys.prev_activatedid value