DISCLAIMER:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I have the full right from the owner of Cronos, to modify, customize and distribute the current kernel under different name.
Modifying and re-uploading this kernel distribution is not allowed.
INFO:
KRAKEN is a friendly oriented project for powerful users and gamers.
KRAKEN supports Project Spaget and OneUI ROMs.
Android Version Support:
Android Pie
Android Q
COMPATIBLE VENDORS [ARM64] :
ARM64 for A3x 2017 by @Astrako
ARM64 for A6x 2018 by @ShaDisNX255
ARM64 for J6x 2018 by @ShaDisNX255
ARM64 for J5x 2017 by @ananjaser1211
ARM64 for J7x 2017 by @ananjaser1211
SUPPORTED DEVICES:
A320x
A600x
J530x
J600x
G610x
J701x
J710x
J730x
FEATURES:
KERNEL:
Based on J530FXWU5CSH7 source
Upstreamed to Linux 3.18.140
Compiled with Linaro's GCC 7.5 Toolchain (2019.12)
Compiled with -pipe, -funroll-loops (GPU), -ffast-math (GPU), -O3, ARM related hardware GCC optimizations and graphite optimizations
Permessive SELinux
Fake KNOX Warranty Status (0x0)
Optimized for Performance
Fast boot (Increased cluster booting frequency)
Heterogeneous Multi-core Processing (PORT from Exynos 7904)
Mali: r29p0 driver (A600FNXXU5CTB9)
Custom Voltage Control (CPU/GPU/MIF/CAM and more)
Dynamic FSync (FSync ON/OFF)
Samsung's LPM (Treble)
ARM32/64 Ready (Treble and OneUI)
HOTPLUG:
Samsung's Hotplug (disabled)
CLOCKS:
OSCCLK frequency up to 27 MHz (FSB)
CL0 frequency up to 1.75 GHz (Small Cluster)
CL0 frequency down to 343 MHz (Small Cluster)
CL1 frequency up to 1.86 GHz (Big Cluster)
CL1 frequency down to 343 MHz (Big Cluster)
G3D frequency up to 1040 MHz (GPU)
G3D frequency down to 343 MHz (GPU)
BUS frequency up to 1937 MHz in dual-channel (RAM)
BUS frequency up to 968 MHz in single-channel (RAM)
MIF switching frequency up to 902 MHz (DEVFREQ)
CAM rebooting frequency up to 533 MHz (DEVFREQ)
TMU (Exynos Thermal Management Unit):
Increased thermal limits for CL0 (Small Cluster)
Increased thermal limits for CL1 (Big Cluster)
Increased thermal limits for G3D (GPU)
DVFS (Dynamic voltage and frequency scaling):
CPU: disabled
GPU: disabled
TCPs:
westwood (default)
bic
cubic
htcp
reno
I/O's:
bfq (default)
noop
deadline
row
cfq
maple
fifo
fiops
sio
sioplus
tripndroid
vr
zen
GOVERNORS:
interactive
interactives9 (default)
blu_active
cafactive
impulse
ondemandplus
bioshock
dancedance
electrodemand
hyper
intellidemand
smartass2
pegasusq
ondemandx
wheatley
thunderstorm
VARIOUS:
Boeffla Wakelock blocker
Powersuspend
WireGuard
Power Efficient workqueues
Ultra Kernel Samepage Merging
Butterizer
ROOT:
KRAKEN doesn't come with Magisk support, but you can manually download and install it from here: Magisk v20.3
SUPPORT:
In thread.
Telegram Group.
CREDITS:
Me, for developing without a device and for the struggle to test new things.
@ananjaser1211 for making this whole thing possible with his amazing work on HeliosPie.
@corsicanu for his great contribution to HeliosPie.
@Astrako for being the first one to test KRAKEN on his A3.
@LelMwhLwl for testing every single kernel image provided by me on his J5.
@kique119 for testing almost every single kernel image on his J7, for including me in his documentation and for the huge boost on what I am doing.
@Me2 for testing many of the provided images.
Thanks to anyone else who made this whole thing possible but it's not included, you are part of it as well!
XDA:DevDB Information
KRAKEN-Kernel for Galaxy Exynos 7870 devices, Kernel for the Samsung Galaxy A3/J5/J7/A6/J7 2017/2018
Contributors
SPARTANICUS, ananjaser1211
Source Code: KRAKEN
ROM OS Version: 9.x +
ROM Kernel: Linux 3.18.140
ROM Firmware Required: Pie Bootloader
Version Information
Status: Stable
Current Stable Version: RC15
Created 2019-08-13
Last Updated 2020-03-27
DOWNLOADS:
Stable Releases
INSTALLATION:
Download the provided KRAKEN-Kernel-VERSION-universal7870-OS-DATE.zip file, place the file in your internal storage or sdcard.
Boot into your recovery, find the "KRAKEN-Kernel...".zip package and flash it.
The package will detect your device and it will flash the right kernel for your device. After the flash was successful you can reboot your device.
Thread is updated, there's also a new KRAKEN version! Enjoy it and report problems as usual.
The overclocking feature of both the gpu and cpu is what attracted me towards this kernel so great job with that dev
But the problem is whenever i flash this kernel, with or without magisk, my phone gets stuck in an infinite boot loop. Tried force rebooting my phone a couple of times but that didnt work either. Im currently using cronos kernel v5 on my j600f running ARM64 HavocOS v2.9
Is there something im messing up in flashing your kernel?
KRAKEN-Kernel-RC10 boot ok in J710MN.
Sometimes system gets a little slow. Altogether, it is a great kernel and more stable than the RC-06 version.
after set 1924 mhz there is reboot
j600f
downvolt to 1300 and 1275 mv is fix it
Kraken RC 15 stable
Release KRAKEN-KERNEL · OGKUARA/android_kernel_samsung_exynos7870
RC15: Changelog: hotplug: disabled on boot kernel: possible reboot fix drivers: battery: limited charging to 1.55A J730X: support for 2A charge A320X: support for 2A charge J600X: support for 2A c...
github.com
Hello, I would like to ask a question Are there bugs in this rom and if there are, can you tell me what bugs are there? I hope your answers have a good day, afternoon or night.
Hey
works on
[ROM][UNOFFICIAL][j6lte][10] LineageOS 17.1
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra...
forum.xda-developers.com
??
Related
KERNEL INFORMATION
Kernel Base: G610FDDU1AQC4 (Latest)
Ramdisk Base: G610FDDU1AQE4 (Latest)
Linux Version: 3.18.36
FEATURES
Activated Interactive Governor
Overclock Gpu
Overclock Cpu to 1.6Ghz
Underclocked to 343Mhz[/B]
Added a lot of CPU Governors
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled TIMA
Disabled Secure Storage
Init.d Support
I/O Schedulers
Frandom
Swap with LZ4 Compression
Dynamic FSync
Powersuspend
Faster boot
Superb Battery Life
nethunter kernel
CPU Governors
alucard
conservative_x
darkness
despair
electrodemand
hyper
impulse
intellidemand
intellimm
ironactive
lionheart
nightmare
ondemand_x
ondemandplus
pegasusq
smartass2
zzmoove
STEPS TO DO........
1: J7 Prime Enigma ROM
https://mega.nz/#!dl8HGSqa!moN1KLdqdXj9C3CbW-8obMhBpEmDRRfeCRhtWo4x_ls (ENIGMA ROM V4.0 superb build by developers)
2: nethunter chroot after enigma rom flash (highly customized kernel with various governors mentioned above)
https://ufile.io/2neyw
3: chroot nethunter file vaild for 30 days as of free account
thanks members kindly do let me know if its working need testers
Welcome to The HeliosPro Kernel Thread for Galaxy J7 Nxt/Core/Neo
Built with Various Oreo 7870 Source.
Linaro GCC 7.3.1
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Various Compiler Optimisations
[x]Compiled with Linaro7.3.1
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 8.0/8.1
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
The kernel comes included with EliteTuner to control various kernel parts.
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J701 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source
-- Credits --
@ananjaser1211 for this golden kernel and adding support for our device.
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general help
@JaskaranSM for Building it For J7velte
@mohitmallick17 for his zip template
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post
Github Source :http://github.com/jaskaranSM/Helios_7870
XDA:DevDB Information
HeliosPro Kernel V2.6-J7velte, Kernel for the Samsung Galaxy J7
Contributors
JaskaranSM
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.7
Stable Release Date: 2019-06-07
Created 2019-02-28
Last Updated 2019-06-07
HeliosPro V2.7 UpdateThis is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time and My potato PC , but i can support this kernel.
Changelog :-
- Compiled with Linaro 7.4.1 Compiler
- Performance and battery greatly improved with new compiler
- IO Schedular Driver Optimisations
- Added hKtweaks app for kernel tuning. (Thanks @corsicanu)
- More Speedier.
- Added NVS Hibernation Driver for better power management.
- Semi-OFast Optimsations for proper balance between performance and battery backup.
- Added Newer Boefolla Wakelock Blocker
- Added Newer Xpad (Joystick Controller) Drivers for Better Compatibilty.
- Added State Notifier Driver
- Added F2FS Filesystem Support.
- Memory driver using FIFO Queue and crypto optimisations
- Updated Wireguard VPN driver.
- Enabled IP tunneling for IPv6 Networks with TCP and UDP ports Support.
- Hotplugging with Real Time Scheduling
- Reduced Wakelocks for WLAN (WiFi) driver
- Added a lot of new TCP congestion Algorithms.
- Initial TCP window size is set to 64k for better caching
- More precise cpu frequency control
- Magisk Included
- New Cool AROMA theme
Follow the Full change log on the Github source.
Download : Google Drive
Size : 34MB
HeliosPro V2.6 UpdateThis is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time, but i can support this kernel.
Changelog :-
- Compiled with Linaro 7.3.1 Compiler
- Performance and battery greatly improved with new compiler
- Fixed custom ramdisk scripts
- Deodex Supported well with magisk
- GMS Blocker
- 99Killer service (kills gms in idle for better sleep)
- NFC Should work now
- More precise cpu voltage
- Magisk 18.1 Included
Follow the Full change log on the Github source.
Download : Google Drive
Size : 37MB
Does the flash write something to the data partition the requires it to be formatted?
I'm asking because it seems like it would be easier for most people, me included, to be able to copy those files and set permissions from the running system opposed to formatting in order to make data readable from TWRP.
Make for Galaxy J6 please
Thanks...Man
The kernel has a problem, the adjustments and how much it goes to the GPU regarding its frequency does not appear, and does not allow overclocking
I have bin 7 android 9 this work?
Welcome to The HeliosPro Kernel Thread for Galaxy J7 Nxt/Core/Neo
Built with Various Oreo 7870 Source.
Linaro GCC 7.3.1
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Various Compiler Optimisations
[x]Compiled with Linaro7.3.1
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 8.0/8.1
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
The kernel comes included with EliteTuner to control various kernel parts.
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J710 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source
-- Credits --
@ananjaser1211 for this golden kernel and adding support for our device.
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general help
@JaskaranSM for Building it For J7velte
@mohitmallick17 for his zip template
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post
Github Source :http://github.com/jaskaranSM/Helios_7870
XDA:DevDB Information
HeliosPro Kernel V2.6-J7velte, Kernel for the Samsung Galaxy J7
Contributors
JaskaranSM
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.6
Stable Release Date: 2019-02-28
Created 2019-02-28
Last Updated 2019-02-28
Welcome to The HeliosPro Kernel Thread for Galaxy J7 Nxt/Core/Neo
Built with Various Oreo 7870 Source.
Linaro GCC 7.3.1
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Various Compiler Optimisations
[x]Compiled with Linaro7.3.1
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 8.0/8.1
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
The kernel comes included with EliteTuner to control various kernel parts.
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J710 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source
-- Credits --
@ananjaser1211 for this golden kernel and adding support for our device.
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general help
@JaskaranSM for Building it For J7velte
@mohitmallick17 for his zip template
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post
Github Source :http://github.com/jaskaranSM/Helios_7870
XDA:DevDB Information
HeliosPro Kernel V2.6-J7velte, Kernel for the Samsung Galaxy J7
Contributors
JaskaranSM
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.6
Stable Release Date: 2019-02-28
Created 2019-02-28
Last Updated 2019-02-28
Enable Spectrum support for EXYNOS 7904 7885 7994 chipset devices.
A10 A20 A30 A30s A40 M20 M30
using spectrum app from google playstore or hktweak app
Works flawlessly with minhker98 kernel with Overclock cpu gpu
= Overclock Big cpu from 1,8Ghz to 2,3Ghz =
= Overclock Litte cpu from 1,6Ghz to 1,9Ghz =
= Underclock Big cpu from 936mhz to 208mhz =
= Underclock Litte cpu from 449mhz to 208mhz =
= Overclock Gpu from 845mhz to 1,3Ghz =
flash via twrp
thank to @frap129 for spectrum app
thanks to ...
link spectrum
https://drive.google.com/file/d/1tyOJCI-pxCADLKzvg_GhQ_AA-a_vjaxf/view?usp=sharing
link minhker kernel using magisk 19.3
https://drive.google.com/drive/u/0/folders/1Th6l0s0FCPUMrGeZien68IzHstrI92_o
im @minhker in telegram
update spectrum uninstaller
https://drive.google.com/drive/u/0/folders/1Th6l0s0FCPUMrGeZien68IzHstrI92_o
Spectrums limits freq to stock freq in balance mode and you get full power of your kernel in gaming mode
what is spectrum ::
---Spectrum is a simple, profile oriented kernel manager that allows developers to create profiles to serve to their users. This is useful for users who are inexperienced with kernel tweaking or users who want something that's a single click away.
Choose from Balance, Performance, Battery, or Gaming profiles to quickly and easily change kernel settings to your preference, now even easier with the included QuickTiles.
XDA:DevDB Information
Spectrum support a30 a20 a10 a30s a40 m20 m30, Kernel for all devices (see above for details)
Contributors
minhka98
Source Code: https://github.com/frap129/spectrum
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v8
Created 2020-08-09
Last Updated 2020-08-17