i have just got op7 and i am in china ... it has hydrogen os ... where can i download oxygen os for re-branding?
PSfficial websites don't show any for op7
Hopefully it'll appear in the official website within a week or maximum by a month.
I flashed GM57BA ROM from here: https://forum.xda-developers.com/oneplus-7/how-to/oneplus-7-repo-oxygen-os-builds-t3937152
It is the EU OTA as the name suggests. It works fine for me - so far.
You can copy it to your SD and run a manual update from settings. It should update your system.
DO NOT flash the stock boot image. I lost my Wifi after I did so.
If anything goes wrong, get the Chinese stock from here as backup: https://www.h2os.com/download
Related
Hey I was experiencing some display issues so I flashed a custom ROM to test / narrow the problem (hardware issue sadly).
—Now I'm not sure how to revert back to completely stock as I've never unlocked the bootloader and worked much with fastboot.
On Samsung's you just download the official stock file, get Odin and put the file into AP, flash, done.
On one plus this is a bit different, first of all there's barely any mentioning of GM-1910 in the MSMDownloaderTool thread(s), I also don't want to have Hydrogen OS.
—My OP7Pro came with Oxygen OS pre-installed, GM1910 "international version" ← def. Chinese with oxygen flashed over it.
*What have you altered so far?*
Unlocked Bootloader/OEM
Flashed TWRP with fastboot
Flashed Havoc 3.0 OS, Magisk, OpenGapps
My perspective on the nature of special relativity.
*What do I want to reset?*
EVERYTHING, ROM, recovery, bootloader, you name it, I don't care about apps and pictures. worth noting I have a One plus Switch Backup, does that help?
Look for the MSM tool... that can reset the phone completely back to stock.
UpdateYourBrowser said:
Hey I was experiencing some display issues so I flashed a custom ROM to test / narrow the problem (hardware issue sadly).
—Now I'm not sure how to revert back to completely stock as I've never unlocked the bootloader and worked much with fastboot.
On Samsung's you just download the official stock file, get Odin and put the file into AP, flash, done.
On one plus this is a bit different, first of all there's barely any mentioning of GM-1910 in the MSMDownloaderTool thread(s), I also don't want to have Hydrogen OS.
—My OP7Pro came with Oxygen OS pre-installed, GM1910 "international version" ← def. Chinese with oxygen flashed over it.
*What have you altered so far?*
Unlocked Bootloader/OEM
Flashed TWRP with fastboot
Flashed Havoc 3.0 OS, Magisk, OpenGapps
My perspective on the nature of special relativity.
*What do I want to reset?*
EVERYTHING, ROM, recovery, bootloader, you name it, I don't care about apps and pictures. worth noting I have a One plus Switch Backup, does that help?
Click to expand...
Click to collapse
You can use the fastboot ROM or Guac (MSM tool for oxygen OS). Links below:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
or
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Good luck!!
Gr8man001 said:
You can use the fastboot ROM or Guac (MSM tool for oxygen OS). Links below:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
or
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Good luck!!
Click to expand...
Click to collapse
excuse my stupidity but given that I want to get rid of my custom ROM and back to stock oxygen which tool do I have to use?
secondly all images (androidfilehost) for the second link are for GM1911,17,13,15 but mine is 1910 which is not listed, what do I do now?
UpdateYourBrowser said:
excuse my stupidity but given that I want to get rid of my custom ROM and back to stock oxygen which tool do I have to use?
secondly all images (androidfilehost) for the second link are for GM1911,17,13,15 but mine is 1910 which is not listed, what do I do now?
Click to expand...
Click to collapse
I am sorry but I am not familiar with Chinese stock ROMs. For some reason, I got the impression that you wanted to restore it to an international version and not the Chinese/HK version. You may want to post a question in the OnePlus community forum or check out their download section for your specific model.
https://forums.oneplus.com/forums/oneplus-7pro-support/
Gr8man001 said:
I am sorry but I am not familiar with Chinese stock ROMs. For some reason, I got the impression that you wanted to restore it to an international version and not the Chinese/HK version. You may want to post a question in the OnePlus community forum or check out their download section for your specific model.
https://forums.oneplus.com/forums/oneplus-7pro-support/
Click to expand...
Click to collapse
no no I want to restore it to international version, the phone itself is GM1910. should I flash GM21AA file or the global file?
I think I will go with the global file, makes most sense in this moment
UpdateYourBrowser said:
no no I want to restore it to international version, the phone itself is GM1910. should I flash GM21AA file or the global file?
I think I will go with the global file, makes most sense in this moment
Click to expand...
Click to collapse
GM21AA should be fine. If you decided to use the MSM tool (the one in the first link), hardest part is to get the L2/qualcomm drivers installed on your PC with the method described. Alternatively you can download and install the drivers yourself which will make the job easier. This will LOCK your bootloader and wipe off everything on your phone. You will get a brand new phone running 10.0.3 OS
Easiet way would be to go fastboot ROM route. It will also wipe your phone but won't lock the bootloader. Once installation is complete you could use the adb command to lock the bootloader. It's one extra step but may be much easier IMO. Download the zip file on PC>unzip it>Hit flash all bat file while the phone is connected in the fastboot mode. You may get some error messages regarding header parsing, ignore them and sit tight until your phone boots.
Good luck!!
WORKS NOW! Can confirm this reverts all back to stock (it will revert back to Oxygen OS (OOS) 9.5 so you'll have to update to Android 10 via OTA if you want)
For anyone wondering, I had Android 10 installed before / Havoc 3.0 and the MSMTool will revert you back to Oxygen OS 9.5. Widevine jumped back to L1 so everything should be stock.
If you have any questions, don't wait, I am sure someone out there had the same questions/issue as me and I hope this will help you.
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
UpdateYourBrowser said:
WORKS NOW! Can confirm this reverts all back to stock (it will revert back to Oxygen OS (OOS) 9.5 so you'll have to update to Android 10 via OTA if you want)
For anyone wondering, I had Android 10 installed before / Havoc 3.0 and the MSMTool will revert you back to Oxygen OS 9.5. Widevine jumped back to L1 so everything should be stock.
If you have any questions, don't wait, I am sure someone out there had the same questions/issue as me and I hope this will help you.
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
Click to expand...
Click to collapse
Hey, I have a problem, I re-locked the bootloader, it is currently blocked, but my Widevine status is still L3, can you tell me if you used MsmTool first and then you did relock, or did you block the bootloader first?
I've got my op7 and wish I could have the full zip for 10.3.0 GM57AA, does anyone here have it?
Also, do you see any advantage on changing from AA to BA?
PS: I live in Brazil
sekk said:
I've got my op7 and wish I could have the full zip for 10.3.0 GM57AA, does anyone here have it?
Also, do you see any advantage on changing from AA to BA?
PS: I live in Brazil
Click to expand...
Click to collapse
Go to playstore & download Oxygen Updater (is unofficial app but works very well)
open it,go settings - Advanced mode = ON / Update method = Full update
go back & download 10.3.0 if you want (2072mb)
__No...stay in GM57AA (global) if you live in brazil...
GM57BA = EU OxygenOS...
[for Fastboot Roms read here : https://forum.xda-developers.com/oneplus-7/how-to/rom-stock-fastboot-roms-oneplus-7-t3937478 ]
Repository thread OOS : https://forum.xda-developers.com/oneplus-7/how-to/oneplus-7-repo-oxygen-os-builds-t3937152 ]
daitalos said:
Go to playstore & download Oxygen Updater (is unofficial app but works very well)
open it,go settings - Advanced mode = ON / Update method = Full update
go back & download 10.3.0 if you want (2072mb)
__No...stay in GM57AA (global) if you live in brazil...
GM57BA = EU OxygenOS...
[for Fastboot Roms read here : https://forum.xda-developers.com/oneplus-7/how-to/rom-stock-fastboot-roms-oneplus-7-t3937478 ]
Repository thread OOS : https://forum.xda-developers.com/oneplus-7/how-to/oneplus-7-repo-oxygen-os-builds-t3937152 ]
Click to expand...
Click to collapse
The fastboot rom idk if it's updated, the oxygen os repo is not, it stopped on 10.0.2
Also, I can get the 10.3.0 file from Oxygen updater, or just directly update the smartphone? Is there any difference between 10.0.3 and 10.3.0? because on fastboot thread, mauronofrio has only made the images for 10.0.3
sekk said:
The fastboot rom idk if it's updated, the oxygen os repo is not, it stopped on 10.0.2
Also, I can get the 10.3.0 file from Oxygen updater, or just directly update the smartphone? Is there any difference between 10.0.3 and 10.3.0? because on fastboot thread, mauronofrio has only made the images for 10.0.3
Click to expand...
Click to collapse
First,take the 10.3.0 zip( full update )from oxygen updater as I told you. update your device via Local Update & Reboot device...
open again oxygen updater app, go settings - advanced mode = disabled / update method = Incremental update, go back & download the latest 10.3.1 update & install it again via Local update...
of course 10.0.3 & 10.3.0 is different builds...10.0.3 is older...The latest oos is 10.3.1
https://postimg.cc/gallery/36bbalage/
no needed fastboot rom etc....I hope your device is STOCK!
For any help etc here : https://forum.xda-developers.com/oneplus-7/help/help-thread-question-noob-friendly-t3954564
daitalos said:
First,take the 10.3.0 zip( full update )from oxygen updater as I told you. update your device via Local Update & Reboot device...
open again oxygen updater app, go settings - advanced mode = disabled / update method = Incremental update, go back & download the latest 10.3.1 update & install it again via Local update...
of course 10.0.3 & 10.3.0 is different builds...10.0.3 is older...The latest oos is 10.3.1
https://postimg.cc/gallery/36bbalage/
no needed fastboot rom etc....I hope your device is STOCK!
For any help etc here : https://forum.xda-developers.com/oneplus-7/help/help-thread-question-noob-friendly-t3954564
Click to expand...
Click to collapse
some said 10.3.0 and 10.0.3 are the same, but 3.0 for global and 0.3 for europe, but I don't who to trust at all...
also, I often use magisk, and I really DON'T LIKE to update system while rooted, so I prefer going for flashing the whole stock rom, update through OTA, and then, just arter these steps, install twrp and magisk... what do you recommend as a step-by-step to do so? remember, I don't want to flash stock while rooted
sekk said:
some said 10.3.0 and 10.0.3 are the same, but 3.0 for global and 0.3 for europe, but I don't who to trust at all...
also, I often use magisk, and I really DON'T LIKE to update system while rooted, so I prefer going for flashing the whole stock rom, update through OTA, and then, just arter these steps, install twrp and magisk... what do you recommend as a step-by-step to do so? remember, I don't want to flash stock while rooted
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-7/how-to/guide-unlock-bootloader-flash-twrp-root-t3954559
no build are the same....otherwise, there would be no updates(for Brazil follow GM57AA (global)- yes, GM57BA is Europe version OOS)
I told you..for any help,question,etc,just read carefully in OP - Specific Threads and Guides for Oneplus 7....all, step by step are described
You can post any question there and you'll receive help...
* https://forum.xda-developers.com/oneplus-7/help/help-thread-question-noob-friendly-t3954564
Hi guys,
I'm on Poco X3 NFC 6/128 GB EU ( Italy ). Phone came with rom 12.0.4.0 QJGEUXM.
First day I run MI Unlock and put it in a bag for 7 days. After 168 hours, I was able to unlock it, flash latest OrangeFox and latest Magisk Canary ( now is 21201 ).
My device works perfectly, loving it. I've only an issue, if it's an issue, not sure. Android never told me that it's available any OTA update... BUT... If I manually look for an update, it insists to download "latest version". And tries to download same version 12.0.4.0 QJGEUXM.
Once finished, 2.25 GB, the ZIP rom seems to be corrupted ( downloaded 3 times and tested with ZArchiver on Android and with WinRAR and WinZip on my laptop ).
Obviously I've never clicked on "install and reboot". But my doubts are still here:
* why it wants to download same rom version?
* why the ZIP file of the rom cannot be checked?
* my 12.0.4.0 QJGEUXM should be the latest Global version, no?
Thx all
PYCON said:
Hi guys,
I'm on Poco X3 NFC 6/128 GB EU ( Italy ). Phone came with rom 12.0.4.0 QJGEUXM.
First day I run MI Unlock and put it in a bag for 7 days. After 168 hours, I was able to unlock it, flash latest OrangeFox and latest Magisk Canary ( now is 21201 ).
My device works perfectly, loving it. I've only an issue, if it's an issue, not sure. Android never told me that it's available any OTA update... BUT... If I manually look for an update, it insists to download "latest version". And tries to download same version 12.0.4.0 QJGEUXM.
Once finished, 2.25 GB, the ZIP rom seems to be corrupted ( downloaded 3 times and tested with ZArchiver on Android and with WinRAR and WinZip on my laptop ).
Obviously I've never clicked on "install and reboot". But my doubts are still here:
* why it wants to download same rom version?
* why the ZIP file of the rom cannot be checked?
* my 12.0.4.0 QJGEUXM should be the latest Global version, no?
Thx all
Click to expand...
Click to collapse
To address your questions briefly:
The updater is downloading correctly. It's downloading the "latest" stable release of EU MIUI, which is 12.0.4.0 . why it's downloading it again is because you pressed download (sometimes, your installed Stock ROM may have issues, so downloading and installing the same version may fix those, and POCO Knows that)
The updater app behaves exactly like other download managers. It downloads the update package data in a separated "chunks" of data and then combines them into one .zip archive. Sometimes the combining goes wrong and the zip is corrupted ( another reason why it does what I explained above).
Yes and no. The latest EU stable is 12.0.4.0, however, the latest EU stable "Beta" is 12.0.7.0 . To opt-in on betas in the future or install manually you can:
Sign in with your mi account, reboot, then go to the updater app and open settings menu. You should find the option receive updates early, enable that and give it a week or two. Or:
Download it manually from this Link.
Do remember that it is a beta and may contain bugs. So downloading the 12.0.4.0 fastboot version as well may be a good idea in case you don't like it and want to downgrade.
Hi, I just received the the Android 11 (2nd) upgrade, 11.1.1.1, and flashed the boot.img specified at the link below (since it seemed to be the same version AC01BA) to regain Magisk capabilities.
Now it is stuck in a bootloop and I have tried to reflash boot with the "stock" boot.img with no luck.
My last hope is that the boot-image in this latest release from OP have changed and that is what made my boot-image the wrong one.
So PLEASE, can anyone please lend me a hand and give me the boot.img for the latest OxygenOS EU release?
For anyone stuck in the same ditch as I was here is the short story:
The boot-image seemed to have changed between the original OxygenOS (Android 11) release and the latest named 11.1.1.1.
I downloaded the stock OS using the first link below, extracted the boot-image using the instructions on the second link below and got the boot-image uploaded to my Google Drive on the third link below, at your pleasure.
Magisk and SafetyNet verified.
(I used this stock OS NordOxygen_14.E.18_OTA_0180_all_2103112026_22699e750a6)
[Update: Rollout Resumed] OnePlus Nord stable Android 11 update pulled due to performance and stability issues
Just over a week after releasing the first stable Android 11 update for the OnePlus Nord, OnePlus has paused the rollout due to performance and stability issues.
www.xda-developers.com
How to Extract payload.bin and get stock boot image file
To extract the payload.bin file from Android stock firmware and get stock boot image file, you should refer to the instructions given in here.
www.droidwin.com
boot_11.1.1.1.img
drive.google.com
Hi there, I bought a Oneplus 9 (12/256) directly from Oneplus Singapore. Everything is great except for the fact that I hoped to update the software to a newer version ( 11.2.7.7 / 11.2.6.6 ) to enjoy the bug fixes and improvements.
The phone came on 11.2.3.3.LE25AA
The default system update showed that it was the latest version.
Okay......then I learnt about Oxygen Updater and used it to update to 11.2.4.4.LE25AA
However, when I proceeded to update further to 11.2.5.5, the app was still showing me that the latest software is 11.2.4.4 (What??)
I then learnt that my phone was running on Global Firmware which was stuck on 11.2.4.4 and though the incremental update from 11.2.5.5 to 11.2.6.6 was available, without being able to update to 11.2.5.5, I was stuck on 11.2.4.4...........
Then I researched my model number and realised that LE2113 meant my Oneplus 9 (purchased directly from Oneplus) was the EU variant.....running the Global firmware......sigh......
So here I am now, seeking advice from you knowledgeable folks, how do I go about getting my phone to run on the EU firmware so that I can enjoy faster(?) updates.
Is it as simple as downloading the full zip of 11.2.6.6.LE25BA from Oxygen Updater and using Local Upgrade in the default System Update? Will this wipe my data?
Or will I have to root/flash or something complicated
Just flash the full BA zip.
_MartyMan_ said:
Just flash the full BA zip.
Click to expand...
Click to collapse
By flash, are you referring to the system updater in the settings app?
Slofh said:
By flash, are you referring to the system updater in the settings app?
Click to expand...
Click to collapse
Yes
Yeah I have the same problem
Waiting for 11.2.7.7 BA