Database Info

[ROOT][RECOVERY]Asus Zenfone Max ZC550KL Qualcomm Snapdragon 615 MSM8939

Guide for rooting and Twrp installation for Zenfone max ZC550KL 615 MSM 8939 :
Warning: Rooting a device automatically voids the warranty. We assume you know what you are doing and we shall not take any responsibility if your device blows up in your face. Be warned.
FILES NEEDED
DRIVERS\TOOLS
a. adb setup; http://www.mediafire.com/file/jsbx6isfpgle319/adb-setup-1.4.3.exe
b. Android usb drivers ;http://www.mediafire.com/file/57fzehmcfqk0y7t/ASUS_Android_USB_drivers_for_Windows_20150212.zip
c.minimal adb and fastboot : http://www.mediafire.com/file/0h36wb7e8aoimvb/minimal_adb_fastboot_v1.3.1_setup.exe
d. Asus bootloader unlock tool for 8939 device : http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
TWRP\ROOT FILES
e. custom recovery image file (Twrp) :
https://www.mediafire.com/file/1kyk0q3b99kcrue/Twrp_3.0.2.img
f. SuperSU file (root) : http://www.mediafire.com/file/dchiph3qkml3u8g/PRO-SuperSU-v2.67.zip
STEP BY STEP GUIDE
1. Download and install adb and Android usb drivers if you don't have them already installed, otherwise, you can skip
2. Download and install minimal adb and fastboot and put icon on desktop
3. Download the Asus bootloader unlock tool .apk file to your device and install like an application in order to unlock bootloader(follow on-screen messages)
4. Boot device into CSC MODE(fastboot\bootloader) and connect to PC via usb cable. (To boot into CSC MODE , press and HOLD "volume up key+power key")
5. open minmal adb and fastboot and enter the following commands:
Code:
[COLOR="Red"]fastboot devices[/COLOR]
hit enter on keyboard and the serial number of your device SHOULD show in minimal adb window, if it does'nt then you've not installed your Android usb drivers correctly !
Code:
[COLOR="Red"]fastboot flash recovery[/COLOR]
after this command press the SPACE KEY ON KEYBOARD AND DRAG THE "CUSTOM RECOVERY IMAGE FILE TO THE MINIMAL ADB WINDOW then hit the enter key on your keyboard and Twrp will be flashed .
IMPORTANT !!
After flashing the TWRP file, you should boot directly into recovery by holding VOLUME DOWN+POWER BUTTON do not allow device to boot into home screen at first boot, otherwise stock recovery will be restored !!!
6. After booting into TWRP , FLASH THE ROOT FILE IMMEDIATELY !
WARNING !
if you don't flash the root file once in twrp, you might encounter a bootloop!
some users report a password prompt while in Twrp, just press "cancel" then go to twrp home screen , WIPE-FORMAT DATA, after formatting data , go back to twrp home screen -REBOOT-RECOVERY , after that flash the root file (make sure your root file is on an external sd card .

Just followed instructions word by word and successfully rooted my Asus Max SD 615 !
Thanks !:good:

Plez upload video..
Please upload video for how to root,twrp and adb installing..because i m a android beginner.

Nandha2335 said:
Please upload video for how to root,twrp and adb installing..because i m a android beginner.
Click to expand...
Click to collapse
Well i guess if you follow it step by step there won't be any problem.If you get stuck at some point just comment here.And installing adb is just like the normal installation of any setup files in windows.Regarding the flashing of twrp there is nothing much to do than the steps mentioned above.If you still need a video go for this.https://youtu.be/kmq2Eyzl3wA NOTE:This video makes use of files for the sd410 model,so don't use the files in that video.Get the files from this post.This video can make you familiarize the process,but steps mentioned here is slightly different.

Nandha
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..

Nandha
Thank u so much bro ..i m following as per u r procedure now my mobile was rooted ...

Nandha2335 said:
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..
Click to expand...
Click to collapse
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).

Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193

jide1 said:
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193
Click to expand...
Click to collapse
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Bro how to change notification panel ..and status bar

Nandha2335 said:
Miui 8 rom properly working or not
don't ask me, i didn't post any rom here, ask him https://forum.xda-developers.com/showthread.php?p=73339833
Click to expand...
Click to collapse

Nandha2335 said:
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Bro how to change notification panel ..and status bar
Click to expand...
Click to collapse
Try using gravity box after installing xposed framework.There a lot of graphical tweaks in gravity box.

Internal Storage Files Missing
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.

kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.

Place the root file on an external sd card.

jide1 said:
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.
Click to expand...
Click to collapse
Thank for your fast reply. By following your steps, I was successful in rooting the phone but when rebooting back to home screen, the black screen's still there.

kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
I guess you have copied the super su file to external sd card.Formatting data as mentioned by jide1 did remove the encryption for me.If it doesn't work do advanced wipe with only the data,cache and dalvik cache boxes checked.Note:don't check any other box.Then reboot into twrp.Go to mount in twrp and see that your external sd is mounted.Now access the external sd card in install option and you will find the files of super su.

How to get into twrp recovery?
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost

6goyal said:
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost
Click to expand...
Click to collapse
Flash twrp again ,disconnect usb cable from pc, then press and HOLD "volume down" AND "power button" when device vibrates, RELEASE "power button" WHILE still holding "volume down" , that should do the job.

Need stock boot.img
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.

Volker802 said:
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.
Click to expand...
Click to collapse
Download the official firmware from Asus website and unpack the zip file, and you'll see the boot.img file there.

Infinix Zero 5/Zero 5 pro (X603) TWRP Recovery 3.1.1 With OTA Support

Touch is Working Now. (Finally) with OTA Support only for zero5 indian varient
Join Telegram group for further development : https://telegram.me/infinixzero5
This is Ported TWRP Recovery from a same Mt6757 chipset model. which i used to port it for our Infinix X603.
Thanx @topjhonwu for magisk.
Thanx for @majorkid for making OTA supportable
TWRP for non indian and global version for necessary changes. (Need to test)
Warning:-
I am not responsible for bricked devices.
Your warranty will void now. Do it at your own Risk.
Unlocking Bootloader
- Make sure your Bootloader is Unlocked. If already unlocked jump to how to flash.
Process to unlocking.
1. go to settings/about phone/build number (tap build no for 7 time now developer option available in settings)
2. go to developer option turn on usb debugging and OEM unlocking.
3. then go to pc download and extract and copy adb fastboot driver folder in Drive C. (or install form net.)
4. Go in fastboot folder which is copied to C. press and hold shift key on your key board and click right key on your mouse it will show option open cmd here or open power shell window here.
5. Click it, A cmd or power shell window will open.
type "adb devices" - it show some no of your device just give permission from your phone screen)
type "adb reboot bootloader" your phone reboot in bootloader mode.
type "fastboot oem unlock" follow onscreen instruction on phone, press volume + to confirm. thats it but it will erase all your data.
Reboot phone by pressing power button for 10 sec. setup it as temporarily.
Flashing of TWRP
1. Download the Latest TWRP Recovery Image and extract it (Attached). Use correct version for your device for OTA support.
For India (Indian) For Global (Global)
(Insert a SD card in your phone to take stock boot.img backup it will required for OTA in Future.)
2. Go in adb fastboot folder which is copied to C. copy twrp_recovery.img here then press and hold shift key on your key board and click right key on your mouse it will show option open cmd here or open power shell window here.
3. Click it, A cmd or power shell window will open.
4. Flash it via fastboot cmd (fastboot flash recovery Twrp_recovery.img) don’t use bracket.
It will flash recovery on your phone. Now type fastboot reboot in cmd window and press and hold vol+ button and hit enter.
Phone will reboot in twrp recovery.
Note : After flashing first time it will ask for password due to phone is encrypted.
a. just cancel it and allow to modify system by swiping arrow at down and select 2nd last option at right side then select globe icon on right and chose your language English.
(First take Boot.img backup Via backup option in TWRP in SD Card. (bcz internal storage shows 0 mb here at this movement.) It will use for OTA so save it.
b. then flash magisk manager.zip file attached here. (it will remove dm-verity and force encryption from boot.img) and give root access.
c. then go to Wipe and select format Data it will erase all data on your internal storage. remember it will erase your data in ext4 format so go to wipe advance select data and change file system to f2fs. Ext4 data not supported by kernel so you got loop to recovery so It must to repair data in f2fs.
d. Done Reboot to recovery and you got mounted storage.
Another Method.
- Flash it via SP flash tool. (use version 5.1744 recommended)
How to use SP flash tool :
Install Vcom media tek driver on your pc.
More detail and download available on following link
https://spflashtool.com/
IF ANYONE GOT LOOP IN BETWEEN TO RECOVERY MEANS PROCESS NOT FOLLOWED PROPERLY.NOT BOOTING PHONE JUST FLASH STOCK RECOVERY. YOUR PHONE WILL BOOT THEN DO PROCESS AGAIN.
OTA-
1. When ota available just download it. Don’t start flashing.
2. Location of OTA downloaded file in Root so use any root file explorer.
3. File can be found in :-
a. Root/cache/update.zip
b. Root/data/data/com.google.android.gms/app_download/update.zip
4. Copy file name is update.zip to your sd card or phone memory.
5. Reboot to recovery and flash first stock boot.img which you already taken backup and saved before when flashing twrp.
6. now flash update.zip via TWRP (dont reboot after flashing otherwise you will currept your system)
7. After flashing update.zip, first again take backup of your boot.img for future ota update.
8. After taking backup of boot.img flash magisk.zip and reboot. (If you did not flash magisk then your data again encrypted and u lose all data)
6. Done you are on latest version.
Note:- Always remember to flash magisk.zip at last before reboot.
OTA SUPPORTABLE TWRP Link for zero 5 global varient by @majorkid -
https://androidfilehost.com/?fid=890129502657578792
OTA SUPPORTABLE TWRP Link for zero 5 pro global varient by [MENTION=7078341]majorkid[/
https://androidfilehost.com/?fid=890129502657578807
Update: Last updated on 27/01/2018 (With almost all stock stuff with OTA support)

Thank you for your efforts I don't know why but it didn't work (i searched and downloaded alot and it's the only recovery that gave me a response but the screen was flipped and the touch was disabled, also the stock recovery is working well)

XDAdeveeloopers said:
Thank you for your efforts I don't know why but it didn't work (i searched and downloaded alot and it's the only recovery that gave me a response but the screen was flipped and the touch was disabled, also the stock recovery is working well)
Click to expand...
Click to collapse
flip screen was old but i updated it with working twrp. is it showing vernee mix 2 name on top?
can you send screen shot.
its working perfectly.
just match the zip size which you downloaded (if it is 13.23 mb then it is old)
download current version attached above is 15.31 mb in size.
Screen Shot is also updated
Let me know your success.............................

flipped screen fixed !
Ok, now it's not flipped but the touch is still disabled
again, thank you for your efforts. I've attached the screenshots. it tells me to enter the password but the touch is disabled and i couldn't type anything.

At this stage only cancle button will work. Dont type anything just press cancle button.
It shows next screen.
I chek if issue is there.

Cancle is not working too

XDAdeveeloopers said:
Cancle is not working too
Click to expand...
Click to collapse
just use it as temp. bcz after flash touch not working.
Touch is disabled in kernel for recovery partation by infinix.
for temp use cmd.
fastboot boot recovery.img
will update soon..........

when i connect my mouse via otg or flash it temporarily it works fine except that it shows that the internal storage is 0mb and when i try to install something it tells me that it's unable to mount /data as rw
also can you tell me how to get the password required in the first screen ?

XDAdeveeloopers said:
when i connect my mouse via otg or flash it temporarily it works fine except that it shows that the internal storage is 0mb and when i try to install something it tells me that it's unable to mount /data as rw
also can you tell me how to get the password required in the first screen ?
Click to expand...
Click to collapse
Read OP carefully. You need to format data partition completly first time and need to patch boot img via lazy flasher.
Showing 0mb bcz it is encrypted. You can use memory card.
If you want root then go for magisk root till recovery updated.

OK, now I removed the encryption, installed magisk and the root worked but when I try to install busybox and some other apps it doesn't work. When I try to install supersu zip it doesn't work (extracting ramdisk failure aborting) , isn't there any way to install supersu in order to get apps working correctly?

XDAdeveeloopers said:
OK, now I removed the encryption, installed magisk and the root worked but when I try to install busybox and some other apps it doesn't work. When I try to install supersu zip it doesn't work, isn't there any way to install supersu in order to get apps working correctly?
Click to expand...
Click to collapse
which busybox your trying and what error.
currently supersu have some error with new devices. which version you tried it should be 2.82 or above.

I downloaded SuperSU-v2.82-201705271822.zip
Busybox pro 61
MagiskManager-v5.4.3.apk

XDAdeveeloopers said:
I downloaded SuperSU-v2.82-201705271822.zip
Busybox pro 61
MagiskManager-v5.4.3.apk
Click to expand...
Click to collapse
Use busybox form playstore stericson.

I downloaded both free and pro versions of stericson's busybox and neither of them worked.
Also I downloaded supersu 2.82 and it also didn't work.

Finally the Touch is updated and working now.
I enabled touch in kernel which is disabled for recovery partition.

XDAdeveeloopers said:
I downloaded both free and pro versions of stericson's busybox and neither of them worked.
Also I downloaded supersu 2.82 and it also didn't work.
Click to expand...
Click to collapse
System is encrypted.
Use magiskmanager beta 14.5 or flash lazyflasher via twrp then one time you need to wipe data partition.
Always remember when you flash orignal boot.img you need to flash lazyflasher or magisk otherwise your system will become encrypted again.

Thank you, now touch is working perfectly <3

XDAdeveeloopers said:
I downloaded both free and pro versions of stericson's busybox and neither of them worked.
Also I downloaded supersu 2.82 and it also didn't work.
Click to expand...
Click to collapse
you can use ndk busybox from magisk app there is option download module.
But currently there is problem with module with this phone. the data partition is in F2FS format and its kernel is not handling f2fs properly.
TWO option for use magisk module.
1. wait for kernel update via infinix. or
2. format data partition as Ext4 from twrp.
Super su does not work correctly with f2fs currently.

But when I format data partition it resets my phone

XDAdeveeloopers said:
But when I format data partition it resets my phone
Click to expand...
Click to collapse
yes formatting data will reset it.

Swipe Elite max : Unlock Bootloader,Unofficial TWRP, Rooting and Stock reflash.

IMPORTANT UPDATE : I have observed that when mounting system R/w device restarts. It means that even after rooting successfully, system is blocking the app. So rooting will not be complete as of now,till further corrections. Rest of the operations are normal, quick reboot apps work properly. and device works normally. So please bear with me.
Freinds , this thread is basically for what the title suggests. After a long time I was able to do it.
I'll update as required, so be patient. and keep watching.
1. Unlock Bootloader
a. Boot device in bootloader from adb in cmd terminal. (To go in fastboot mode, press power and volume down button ).
Please enter these commands, one at a time.
Code:
adb devices
(this will show your device)
adb reboot-bootloader
( device will reboot to bootloader). Then enter this...
fastboot devices
(this will show your device)
fastboot oem unlock-go
( If it shows already unlocked, go to twrp flash. If it is not, It will ask for erasing data, so backup all your data. This will unlock your bootloader.)
2. Flash TWRP
In fastboot mode: continue.......
Code:
fastboot flash recovery twrp.img
(Flash the image I have provided)
You can also try
fastboot boot twrp.img
( to try this image file, if you are scared of bricking the phone.)
3. Flash patched boot.
Code:
fastboot flash boot boot.img
(Flash the image I have provided. This is necessary as otherwise the su zip may not work )
4. Rooting
Please copy the SuperSu zip file to your micro sd card. Now boot to Twrp recovery. My advice is to backup of your system and boot. Then wipe data, dalvik-cache,cache, Internal storage. (Sometimes, format option is required.)
Now flash this zip.
If there are errors anywhere, please tell me and I shall try to correct them.
Updates :
1. Twrp stable added on 8/6/2018
2. Twrp_3.1.0.1 added on 11/6/2018, Removed Old Twrp link.
3. Twrp_3.1.0.1 Link updated on 13.6.2018.
4. Twrp_3.1.0.1 Link updated on 9.7.2019. Removed Old Twrp 3.1.0.1 link.
Downloads
1. Twrp_Stable_3.0.2.0.img: Link
2. TWRP_3.1.0.1_unofficial_SwipeEliteMax : https://drive.google.com/open?id=1n-DfHwC4_WRn_Jlr5FosOb6lW827M5ho
Remember first thing before rooting, do a backup of system and boot.img. Rest is your choice.
2. SuperSu zip: http://www.supersu.com/download Or you can download from anywhere on the net.
3. Patched Boot : Link

Stock Reflash and subsequent Update:
1. Stock Version V12 Reflash :
Remember , boot takes 5-10 mins to come on. So don't panic when device doesn't boot.
If the need arises due to any reason device hangs in logo, first restore only boot which you backed up. If still no change, restore system also.
But if you want to flash stock version , then read ahead.
The FOTA zip did not work for me from adb sideload. So I will recommend the QFIL download.
1. Download Stock Rom and Qualcomm downloader from here
Extract the zip. Install the drivers.
2. QFIL install : Download and install Qualcomm downloader.
It should look like the image in attachments
1. If it shows Flat Build / Meta Build, choose Flat Build.
2. Click "browse" and select "prog_emmc_firehose_8937_lite.mbn" , in the Extracted Stock rom folder
3. Click Load XML and select "rawprogram_unsparse.xml" in the Extracted Stock rom folder.
4. Click Load Patch and select "patch0.xml" in the Extracted Stock rom folder.
5. Click Download. If device is in adb mode, no problem, it will go in download mode automatically.
If it is not, just connect and shutdown device . While it is shutting down, it will connect automatically andf flash will begin.
Do not disconnect while process is on. Be patient.
2. Update to V15 :
After Stock reflash, the update to V15 comes immediately after connecting to internet.
Just incase someone wants to flash it offline , here is the process and file.
1. Recovery Method : Place gobi zip in adb folder . Go to stock recovery. Press Volume up and Power button. Once in recovery, choose "update from adb" .
Enter the following command in cmd console :
Code:
adb sideload update-gobi.zip.
Downloads : Update zip for Version Update from V12 to V15. Link

Yogesh1969 said:
Freinds , this thread is basically for what the title suggests. After a long time I was able to do it.
I'll update as required, so be patient. and keep watching.
1. Unlock Bootloader
a. Boot device in bootloader from adb in cmd terminal, Please enter these commands, one at a time.
2. Flash TWRP
In fastboot mode: continue.......
You can also try
3. Flash patched boot.
4. Rooting
Please copy the SuperSu zip file to your micro sd card.
My advice is to backup your data, then wipe data, dalvik-cache,cache, Internal storage. Sometimes, format option is required.
Now boot to Twrp recovery and flash this zip.
If there are errors anywhere, please tell me and I shall try to correct them.
Downloads
1. TWRP : https://drive.google.com/open?id=0BztfiMqkQrCaQVA4T01pRmlmYXc
Remember first thing before rooting, do a backup of system and boot. Rest is your schoice.
2. SuperSu zip: http://www.supersu.com/download
3. Boot : https://drive.google.com/open?id=19StfSorHM8T89uX07epstCWIUnMsITjz
Click to expand...
Click to collapse
Thanks for help bro. But the tarp zip file u shared needs a password to be opened.

Sorry
partha_h said:
Thanks for help bro. But the tarp zip file u shared needs a password to be opened.
Click to expand...
Click to collapse
Sorry Parth. I linked a wrong image . I now have updated the link. please check and tell me. Dont' hurry in any process. Take care.

Yogesh1969 said:
Sorry Parth. I linked a wrong image . I now have updated the link. please check and tell me. Dont' hurry in any process. Take care.
Click to expand...
Click to collapse
Thanks
Rooted my device successfully. Solved the twrp data decrypt password issue. Mounted super su via usb and my device is successfully rooted.
Thanks again
Now it's time to search for custom roms. Suggest me any ROM u recommend

partha_h said:
Thanks
Rooted my device successfully. Solved the twrp data decrypt password issue. Mounted super su via usb and my device is successfully rooted.
Thanks again
Now it's time to search for custom roms. Suggest me any ROM u recommend
Click to expand...
Click to collapse
Glad to hear that. I don't have any information about specific roms for swipe but we may have to port any aosp or lineage roms for our chipset (msm8937). Once I'm free, I'll get to search that. ....

partha_h said:
Thanks
Now it's time to search for custom roms. Suggest me any ROM u recommend
Click to expand...
Click to collapse
I have ported an AOSP for Redmi 3s. But it has flaws,(wifi, etc.) will take time. Also, I have removed all unwanted apps from the stock. So it is now smaller.

Sorry repeated msg

Yogesh1969 said:
I have ported an AOSP for Redmi 3s. But it has flaws,(wifi, etc.) will take time. Also, I have removed all unwanted apps from the stock. So it is now smaller.
Click to expand...
Click to collapse
Pls share if there is any . Thanks

partha_h said:
Pls share if there is any . Thanks
Click to expand...
Click to collapse
Actually, AOSP and lineage Os ,both are ported successfully. But there are some flaws. Time is a major factor.
Also, I think Our Rom is better than these roms. From twrp I removed all useless apps. So memory has increased a bit.
So, i think instead of marshmallow I should try Nougat or Oreo if possible. Of course time is an enemy . Just hope.

Yogesh1969 said:
Actually, AOSP and lineage Os ,both are ported successfully. But there are some flaws. Time is a major factor.
Also, I think Our Rom is better than these roms. From twrp I removed all useless apps. So memory has increased a bit.
So, i think instead of marshmallow I should try Nougat or Oreo if possible. Of course time is an enemy . Just hope.
Click to expand...
Click to collapse
Hi. U r doing great. Android 7 or 8 would be gud option. Keep up the good work. Thanks

Some one plz send build.prop file of swipe elite max
Some one plz send build.prop file of swipe elite max

Your build.prop attached.
Sachin2015 said:
Some one plz send build.prop file of swipe elite max
Click to expand...
Click to collapse
Is something wrong with your phone or just experimenting ?
Anyways, there are two build.prop files in the system folder, so attached both. good luck.

Yogesh1969 said:
Is something wrong with your phone or just experimenting ?
Anyways, there are two build.prop files in the system folder, so attached both. good luck.
Click to expand...
Click to collapse
Thanx Dude.
How to enable VoLTE for airtel user in this phone ?
How to write imei on this phone ?
and can u send a updated baseband file for this ?

Sachin2015 said:
Thanx Dude.
How to enable VoLTE for airtel user in this phone ?
How to write imei on this phone ?
and can u send a updated baseband file for this ?
Click to expand...
Click to collapse
Hi. This is a very late reply . Sorry for that.
To enable volte, you have to go to
Settings>More>Cellular networks.
Here, you have to enable/On Enhanced 4G Lte mode.
But, you have to remember, few things. Our phone has only one 4g and one 2g slot. You can use any slot for 4g. The other will automatically turn to 2g. This happens when you choose data for that sim.
Another problem you will face if you have the other sim of JIO. It works only in 4g. So if you awnt volte /4g on Airtel and other sim is Jio, you will have no network on Jio as it does not work in 2g/3g.
For Imei , just google SN / IMEI writing softwares from the net. But mind you enter the right IMEIs, as you mind land in trouble if non-matching one is written.
What base band file do you want ? The firmware folder ?

Yogesh1969 said:
Hi. This is a very late reply . Sorry for that.
To enable volte, you have to go to
Settings>More>Cellular networks.
Here, you have to enable/On Enhanced 4G Lte mode.
But, you have to remember, few things. Our phone has only one 4g and one 2g slot. You can use any slot for 4g. The other will automatically turn to 2g. This happens when you choose data for that sim.
Another problem you will face if you have the other sim of JIO. It works only in 4g. So if you awnt volte /4g on Airtel and other sim is Jio, you will have no network on Jio as it does not work in 2g/3g.
For Imei , just google SN / IMEI writing softwares from the net. But mind you enter the right IMEIs, as you mind land in trouble if non-matching one is written.
What base band file do you want ? The firmware folder ?
Click to expand...
Click to collapse
not showing any network..need the modem files

Sachin2015 said:
not showing any network..need the modem files
Click to expand...
Click to collapse
Did you get the files ? If you want the firmware folder, im attaching here.

root for Xperia XZS so-03j (Japan Docomo Variant)

Hello,
I got a Xperia XZS SO-03J (Japan Docomo Variant). Anybody got any ideas to root this device and any custom roms. Already searched the forum but no avail. Thank you for your help.

Japanese cellular version usually unable to unlock bootloader.but still some phones can unlock. if you have twrp ,you can install some rooted ROMs modified from official ROM.(btw you have to find a ROM can install without unlock bootloader)

sinkoo1979 said:
Hello,
I got a Xperia XZS SO-03J (Japan Docomo Variant). Anybody got any ideas to root this device and any custom roms. Already searched the forum but no avail. Thank you for your help.
Click to expand...
Click to collapse
if you have docomo ubl yes you can patch kernel manual , because it's different from Au,Global,Softbank
I've tried with x compact docomo ubl yes

I think first of all need to check whether the bootloader is unlockable or not

if you can UNLOCK the Japanese Xzs then
you can use this TWRP
https://dl.twrp.me/kagura/twrp-3.2.3-0-kagura.img.html
there is a depate that you can cross flash XZ's Android 6 to extract DRM keys! but i am not going to go that, as soon as you UNLOCK you bootload, TA partition will be GONE..
what is your build number?
download your build from FLASHTOOL---> Xperfirm and send me KERNEL.sin and i will send you the modded kernel
rest PROCESS you can Read (carefully) at
https://forum.xda-developers.com/xperia-xz/how-to/rooted-kernels-f8332-41-3-2-588-0-t3748987
its for XZ but applies to XZs too!

YasuHamed said:
if you can UNLOCK the Japanese Xzs then
you can use this TWRP
https://dl.twrp.me/kagura/twrp-3.2.3-0-kagura.img.html
there is a depate that you can cross flash XZ's Android 6 to extract DRM keys! but i am not going to go that, as soon as you UNLOCK you bootload, TA partition will be GONE..
what is your build number?
download your build from FLASHTOOL---> Xperfirm and send me KERNEL.sin and i will send you the modded kernel
rest PROCESS you can Read (carefully) at
https://forum.xda-developers.com/xperia-xz/how-to/rooted-kernels-f8332-41-3-2-588-0-t3748987
its for XZ but applies to XZs too!
Click to expand...
Click to collapse
YusaHamed this is my kernel https://drive.google.com/open?id=1mGpQOcWcuCfwp4U0wrt29HzERH5SQrTr
i need your help to mod this kernel, and then this is my build number 41.3.B.1.140
:fingers-crossed:

Amirai17 said:
YusaHamed this is my kernel https://drive.google.com/open?id=1mGpQOcWcuCfwp4U0wrt29HzERH5SQrTr
i need your help to mod this kernel, and then this is my build number 41.3.B.1.140
:fingers-crossed:
Click to expand...
Click to collapse
requesting you please
send me also these three files
/system/vendor/etc/fstab.qcom
/system/vendor/etc/init/hw/init.qcom.rc
/system/vendor/etc/init/hw/init.target.rc
there will be system.sin in that ftf,
convert it using FLASHTOOL > tool > sineditor > selected system.sin and click extract data, it will make 6gb file SYSTEM.ext4, open it with 7zip and locate the above three file and add in the goodle drive PLZ

Amirai17 said:
YusaHamed this is my kernel https://drive.google.com/open?id=1mGpQOcWcuCfwp4U0wrt29HzERH5SQrTr
i need your help to mod this kernel, and then this is my build number 41.3.B.1.140
:fingers-crossed:
Click to expand...
Click to collapse
FROM THIS LINK
https://mega.nz/#F!eRh0TSiQ!j6FNfTsHpkw8DECUNRF5QQ
kindly copy into SDCARD of your mobile the following files
1. magisk17.2
2. drmFix.zip
3. NightLight.zip (optional)
4. magisk MANAGER 6.0.1.apk
and
then FLASH twrp to your XZs by Connecting in to Fastboot mode (BLUE LED) and opening "MINIMAL ADB AND FASBOOT"
you can download it from here https://forum.xda-developers.com/showthread.php?t=2317790
Code:
in adb type
FASTBOOT DEVICE (then enter)
<it will show some hex code, confirming your device is in fastboot mode connected>
now type
FASTBOOT FLASH RECOVERY <and drag twrp image file from DESKTOP to your black cmd window... it will come as path>
press enter and flashing will be done
unplug device and press and hold volume down and power until you see twrp...
- keep system read only
- goto backup
- backup boot and swipe right, it will make boot backup in your sd card (it always recommended
- now goto install
- click flash IMAGE FILE button at bottom
- select KERNEL_CLEAN_41.3.B.1.140_XZs_SO-03J.img
- it will ask where to flash ... CHECK BOX "BOOT" ( BE CAREFUL )
- twrp will flash boot with provided kernel
- now click button FLASH ZIP file & flash DRMFIX.zip
- now flash Magisk17.x.zip
- now flash NIGHTLIGHT.zip (optional)
- clear cache
- poweroff and while powering off, select DONOT INSTALL TWRP.
press power on and let device boot, first boot may goto bootloops.
the device will now boot and check for MAGISK app in app drawer, if you can find it, GOOD, otherwise install MAGISK MANAGER 6.0.1.apk from your sd card
install rootchecker from playstore and check for root access
done

YasuHamed said:
FROM THIS LINK
https://mega.nz/#F!eRh0TSiQ!j6FNfTsHpkw8DECUNRF5QQ
kindly copy into SDCARD of your mobile the following files
1. magisk17.2
2. drmFix.zip
3. NightLight.zip (optional)
4. magisk MANAGER 6.0.1.apk
and
then FLASH twrp to your XZs by Connecting in to Fastboot mode (BLUE LED) and opening "MINIMAL ADB AND FASBOOT"
you can download it from here https://forum.xda-developers.com/showthread.php?t=2317790
Code:
in adb type
FASTBOOT DEVICE (then enter)
<it will show some hex code, confirming your device is in fastboot mode connected>
now type
FASTBOOT FLASH RECOVERY <and drag twrp image file from DESKTOP to your black cmd window... it will come as path>
press enter and flashing will be done
unplug device and press and hold volume down and power until you see twrp...
- keep system read only
- goto backup
- backup boot and swipe right, it will make boot backup in your sd card (it always recommended
- now goto install
- click flash IMAGE FILE button at bottom
- select KERNEL_CLEAN_41.3.B.1.140_XZs_SO-03J.img
- it will ask where to flash ... CHECK BOX "BOOT" ( BE CAREFUL )
- twrp will flash boot with provided kernel
- now click button FLASH ZIP file & flash DRMFIX.zip
- now flash Magisk17.x.zip
- now flash NIGHTLIGHT.zip (optional)
- clear cache
- poweroff and while powering off, select DONOT INSTALL TWRP.
press power on and let device boot, first boot may goto bootloops.
the device will now boot and check for MAGISK app in app drawer, if you can find it, GOOD, otherwise install MAGISK MANAGER 6.0.1.apk from your sd card
install rootchecker from playstore and check for root access
done
Click to expand...
Click to collapse
Thanks for the kernel mod, you mod it so fast that's so amazing
Anyway i will try it tomorrow, pray fo the kernel got stable
Before i use this kernel on this thread https://forum.xda-developers.com/xzs/development/root-xperia-xzs-t3726911
And i got unstable performance. Trying use kernel auditor not effect it and i decide to flash it back to normal again.

Amirai17 said:
Thanks for the kernel mod, you mod it so fast that's so amazing
Anyway i will try it tomorrow, pray fo the kernel got stable
Before i use this kernel on this thread https://forum.xda-developers.com/xzs/development/root-xperia-xzs-t3726911
And i got unstable performance. Trying use kernel auditor not effect it and i decide to flash it back to normal again.
Click to expand...
Click to collapse
I dont know about that thread
Seems like different process
Anways plz do try this and let me know

YasuHamed said:
I dont know about that thread
Seems like different process
Anways plz do try this and let me know
Click to expand...
Click to collapse
Sorry i take a long time to try it,
But i just try it n i can root my phone
for performance, not yet test it
no any trouble on process, but
i want to ask, what the use of nightlight?

Amirai17 said:
Sorry i take a long time to try it,
But i just try it n i can root my phone
for performance, not yet test it
no any trouble on process, but
i want to ask, what the use of nightlight?
Click to expand...
Click to collapse
This is a good news! , good to know that you were able to Root it.
i am sure you will find good performance.
nighlight makes your screen TINT different (reduces blue) which makes it easier on eyes while you browsing in night or from bed. blue light hurts eyes and brain and increases sleeplessness.
a shortcut toggle button next to FLASHLIGHT will appear (if arent already in your build) and display setting will have NIGHLIGHT FEATURE ENABLED- you can control the INTENSITY of this filter according to your needs

YasuHamed said:
FROM THIS LINK
https://mega.nz/#F!eRh0TSiQ!j6FNfTsHpkw8DECUNRF5QQ
kindly copy into SDCARD of your mobile the following files
1. magisk17.2
2. drmFix.zip
3. NightLight.zip (optional)
4. magisk MANAGER 6.0.1.apk
and
then FLASH twrp to your XZs by Connecting in to Fastboot mode (BLUE LED) and opening "MINIMAL ADB AND FASBOOT"
you can download it from here https://forum.xda-developers.com/showthread.php?t=2317790
Code:
in adb type
FASTBOOT DEVICE (then enter)
<it will show some hex code, confirming your device is in fastboot mode connected>
now type
FASTBOOT FLASH RECOVERY <and drag twrp image file from DESKTOP to your black cmd window... it will come as path>
press enter and flashing will be done
unplug device and press and hold volume down and power until you see twrp...
- keep system read only
- goto backup
- backup boot and swipe right, it will make boot backup in your sd card (it always recommended
- now goto install
- click flash IMAGE FILE button at bottom
- select KERNEL_CLEAN_41.3.B.1.140_XZs_SO-03J.img
- it will ask where to flash ... CHECK BOX "BOOT" ( BE CAREFUL )
- twrp will flash boot with provided kernel
- now click button FLASH ZIP file & flash DRMFIX.zip
- now flash Magisk17.x.zip
- now flash NIGHTLIGHT.zip (optional)
- clear cache
- poweroff and while powering off, select DONOT INSTALL TWRP.
press power on and let device boot, first boot may goto bootloops.
the device will now boot and check for MAGISK app in app drawer, if you can find it, GOOD, otherwise install MAGISK MANAGER 6.0.1.apk from your sd card
install rootchecker from playstore and check for root access
done
Click to expand...
Click to collapse
I have the same phone xzs docomo so-03j on the same build, is it ok if i flash this too or will it brick my phone? thank you
---------- Post added at 05:14 PM ---------- Previous post was at 05:10 PM ----------
Amirai17 said:
Sorry i take a long time to try it,
But i just try it n i can root my phone
for performance, not yet test it
no any trouble on process, but
i want to ask, what the use of nightlight?
Click to expand...
Click to collapse
How has it been? the performance? mine heats up akot when gaming and is even slower than my Softbank xperia xz I would like to root mine as well if it is good and if it is possible

other build number
YasuHamed said:
FROM THIS LINK
https://mega.nz/#F!eRh0TSiQ!j6FNfTsHpkw8DECUNRF5QQ
kindly copy into SDCARD of your mobile the following files
1. magisk17.2
2. drmFix.zip
3. NightLight.zip (optional)
4. magisk MANAGER 6.0.1.apk
and
then FLASH twrp to your XZs by Connecting in to Fastboot mode (BLUE LED) and opening "MINIMAL ADB AND FASBOOT"
you can download it from here https://forum.xda-developers.com/showthread.php?t=2317790
Code:
in adb type
FASTBOOT DEVICE (then enter)
<it will show some hex code, confirming your device is in fastboot mode connected>
now type
FASTBOOT FLASH RECOVERY <and drag twrp image file from DESKTOP to your black cmd window... it will come as path>
press enter and flashing will be done
unplug device and press and hold volume down and power until you see twrp...
- keep system read only
- goto backup
- backup boot and swipe right, it will make boot backup in your sd card (it always recommended
- now goto install
- click flash IMAGE FILE button at bottom
- select KERNEL_CLEAN_41.3.B.1.140_XZs_SO-03J.img
- it will ask where to flash ... CHECK BOX "BOOT" ( BE CAREFUL )
- twrp will flash boot with provided kernel
- now click button FLASH ZIP file & flash DRMFIX.zip
- now flash Magisk17.x.zip
- now flash NIGHTLIGHT.zip (optional)
- clear cache
- poweroff and while powering off, select DONOT INSTALL TWRP.
press power on and let device boot, first boot may goto bootloops.
the device will now boot and check for MAGISK app in app drawer, if you can find it, GOOD, otherwise install MAGISK MANAGER 6.0.1.apk from your sd card
install rootchecker from playstore and check for root access
done
Click to expand...
Click to collapse
why with different build number?
i have build number 41.3.B.1.113
or can i flash to global rom and what the side effect?

plz tell me how you root your xz. my xz 601so with allowed yes
Amirai17 said:
Sorry i take a long time to try it,
But i just try it n i can root my phone
for performance, not yet test it
no any trouble on process, but
i want to ask, what the use of nightlight?
Click to expand...
Click to collapse

Temporary root is now possible on the Xperia so-03j, I personally tested a few minutes ago.
Check this comment for instructions. And here instructions to create a launcher.

YasuHamed said:
FROM THIS LINK
https://mega.nz/#F!eRh0TSiQ!j6FNfTsHpkw8DECUNRF5QQ
kindly copy into SDCARD of your mobile the following files
1. magisk17.2
2. drmFix.zip
3. NightLight.zip (optional)
4. magisk MANAGER 6.0.1.apk
and
then FLASH twrp to your XZs by Connecting in to Fastboot mode (BLUE LED) and opening "MINIMAL ADB AND FASBOOT"
you can download it from here https://forum.xda-developers.com/showthread.php?t=2317790
Code:
in adb type
FASTBOOT DEVICE (then enter)
<it will show some hex code, confirming your device is in fastboot mode connected>
now type
FASTBOOT FLASH RECOVERY <and drag twrp image file from DESKTOP to your black cmd window... it will come as path>
press enter and flashing will be done
unplug device and press and hold volume down and power until you see twrp...
- keep system read only
- goto backup
- backup boot and swipe right, it will make boot backup in your sd card (it always recommended
- now goto install
- click flash IMAGE FILE button at bottom
- select KERNEL_CLEAN_41.3.B.1.140_XZs_SO-03J.img
- it will ask where to flash ... CHECK BOX "BOOT" ( BE CAREFUL )
- twrp will flash boot with provided kernel
- now click button FLASH ZIP file & flash DRMFIX.zip
- now flash Magisk17.x.zip
- now flash NIGHTLIGHT.zip (optional)
- clear cache
- poweroff and while powering off, select DONOT INSTALL TWRP.
press power on and let device boot, first boot may goto bootloops.
the device will now boot and check for MAGISK app in app drawer, if you can find it, GOOD, otherwise install MAGISK MANAGER 6.0.1.apk from your sd card
install rootchecker from playstore and check for root access
done
Click to expand...
Click to collapse
can i root my Xperia XZs AU version with these files that are attached in this post, or do i need different files ?
thank you @YasuHamed

5crypt said:
can i root my Xperia XZs AU version with these files that are attached in this post, or do i need different files ?
thank you @YasuHamed
Click to expand...
Click to collapse
Those files seem appropriate for stock rom release 41.3.B.1.140., so don't try unless you're running that specific version (quite outdated if you ask me).
But first make sure your bootloader can be unlocked. If that's the case, you may want to install a recent rom with root support, or check the guides for rooting stock rom. Be aware that with unofficial roms you might lose camera quality or have no cam support at all.
If you're stuck with an unlockable bootloader (like myself) your choices are much more limited. My current approach is having latest stock, disable bloatware apps, and use temporary root when needed.

thank you @dinosaur99 for your quick response, i got the one that cannot be unlocked, so i'm using the temp root method, but do you know how to gain temp root access without using adb (laptop or computer), and can i automate the temp root every after reboot ?
again thank you for your response, and looking forward from you

5crypt said:
thank you @dinosaur99 for your quick response, i got the one that cannot be unlocked, so i'm using the temp root method, but do you know how to gain temp root access without using adb (laptop or computer), and can i automate the temp root every after reboot ?
again thank you for your response, and looking forward from you
Click to expand...
Click to collapse
Good question! I wanted to create a launcher too!
So I just followed these instructions and it works fine. First you need to perform the following commands from computer (have a copy of the exploit file in working directory):
Bash:
adb push su98-memory-kallsyms /data/local/tmp/
adb shell
# Run this from inside the shell
chmod +x /data/local/tmp/su98-memory-kallsyms
/data/local/tmp/su98-memory-kallsyms
chcon u:object_r:system_file:s0 /data/local/tmp/su98-memory-kallsyms
Now reboot the phone, and the file /data/local/tmp/su98-memory-kallsyms should still be there. On your favourite console app, create a new terminal launcher/profile/whatever it's called and name it "Root terminal", then make it so it runs this command on shell login:
Bash:
/data/local/tmp/su98-memory-kallsyms
Note there's a trailing <Enter> key at the end of the command. I use Connectbot and it was necessary.
Cheers!
Edit:
By the way, the last line would be the equivalent to "sudo bash" in a computer. That means you can write a script with the root commands to be executed upon reboot. Example launcher:
Bash:
/data/local/tmp/su98-memory-kallsyms /data/local/tmp/my-script

[Solved] Several unsuccessful attempts to root Ulefone armor 3WT.

I've been trying to root my Ulefone armor 3WT for about a year now and still haven't gotten anywhere.
Here is how far I've gotten so far (with issues);
1. Fastboot commands - Cannot do fastboot commands in CMD, correct drivers are installed. Fastboot in CMD cannot find the device when the phone boots into fastboot mode. I can use ADB just fine.
2. The MediaTek flash tool - Cannot find a proper .scatter file to flash to the phone, nor can I create one.
People seem to be having lots of luck with number one, but I cannot figure out how they're getting fastboot to work in CMD.
Would like some help from anyone that has rooted this type of phone, or just any suggestions to help me with this thing.
Solved, (by radiomean-uk) follow this guide:
Here is the relevant post (hope I don't break and rules...)
=====================================================
=====================================================
Instructions:
1. Flash recovery.img via spflashtool or platformtools.
2. Boot to TWRP.
Touchscreen is not working properly in TWRP on our gadgets. You need to use OTG cable and mouse. Skip enter password form. Default language is russian so you can choose your in options.
3. Install disable force encryption and magisk (if you need root) via TWRP.
4. Boot to system. Enjoy.
Download link (merge go ogle together)
drive.go ogle.com/open?id=1J0HlsJYTyJUGAHjIXYMDUXye4DD9kEAC
Click to expand...
Click to expand...
Click to collapse
Here is a clickable download link: https://drive.google.com/drive/folders/1J0HlsJYTyJUGAHjIXYMDUXye4DD9kEAC
For anyone following these are the steps i did (assuming you unlocked bootloader already):
1. Copy both zips to external sd as internal storage wont work at first
2. adb reboot bootloader
3. fastboot flash recovery recovery.img
4. unplug usb and hold power button until screen turns off
5. let go of power button, count to 2, press and hold power button and volume up together until screen turns back on
6. let go of power button when screen turns on but keep holding volume up until you see TWRP screen
7. as above post said, cancel password and swipe to enter main menu and then one square above the bottom right to enter the language menu
8. flash both zips from external sd card
9. format data (not wipe but format to get rid of encryption) - i rebooted after flashing the zips and had to go back to recovery again to format the data !THIS DOES A FACTORY RESET!
10. reboot to system this will cause it to be set up as new
11. reboot to recovery again, this time there should be no password and in install you should be able to see internal storage of the phone
12. flash magisk / anything else you want
Click to expand...
Click to collapse

oh oh i know
I had the same problem
You need a linux terminal or a linux system to use fastboot commands!! I found that the hard way...
I don't use sp flash tool so idk about the other question

TOG_WAS_HERE said:
I've been trying to root my Ulefone armor 3WT for about a year now and still haven't gotten anywhere.
Here is how far I've gotten so far (with issues);
1. Fastboot commands - Cannot do fastboot commands in CMD, correct drivers are installed. Fastboot in CMD cannot find the device when the phone boots into fastboot mode. I can use ADB just fine.
2. The MediaTek flash tool - Cannot find a proper .scatter file to flash to the phone, nor can I create one.
People seem to be having lots of luck with number one, but I cannot figure out how they're getting fastboot to work in CMD.
Would like some help from anyone that has rooted this type of phone, or just any suggestions to help me with this thing.
Click to expand...
Click to collapse
have you run the 15 sec adb fastboot installers?
maybe you can try powershell also https://github.com/PowerShell/powershell/releases
you need to add .\ in front of commands though.

hellofriendlymanveriosns said:
oh oh i know
I had the same problem
You need a linux terminal or a linux system to use fastboot commands!! I found that the hard way...
I don't use sp flash tool so idk about the other question
Click to expand...
Click to collapse
Yeah, I was actually just about to do that tonight. Hopefully, that'll work.

jjgvv said:
have you run the 15 sec adb fastboot installers?
maybe you can try powershell also https://github.com/PowerShell/powershell/releases
you need to add .\ in front of commands though.
Click to expand...
Click to collapse
I never gave PowerShell a try. I'll have to try it out.
Okay, just tried it. Powershell doesn't work either.

TOG_WAS_HERE said:
1. Fastboot commands - Cannot do fastboot commands in CMD, correct drivers are installed. Fastboot in CMD cannot find the device when the phone boots into fastboot mode. I can use ADB just fine.
Click to expand...
Click to collapse
To get fastboot working requires the "Android USB Driver" suitable to your phone is properly installed, too.

jwoegerbauer said:
To get fastboot working requires the "Android USB Driver" suitable to your phone is properly installed, too.
Click to expand...
Click to collapse
Yeah, I forgot to say I have the manufacture's driver installed.

Then it might be fastboot didn't get inplemented by OEM/carrier because they want their own tools to get used, for example MTK Flash Tool and /or SP Flash Tool. Who knows that for sure? Me not.

hellofriendlymanveriosns said:
oh oh i know
I had the same problem
You need a linux terminal or a linux system to use fastboot commands!! I found that the hard way...
I don't use sp flash tool so idk about the other question
Click to expand...
Click to collapse
TOG_WAS_HERE said:
Yeah, I was actually just about to do that tonight. Hopefully, that'll work.
Click to expand...
Click to collapse
Linux works for anyone wondering.

TOG_WAS_HERE said:
Linux works for anyone wondering.
Click to expand...
Click to collapse
I mean works for me you could try live boot.
does adb work?

hellofriendlymanveriosns said:
I mean works for me you could try live boot.
does adb work?
Click to expand...
Click to collapse
adb works on Linux and windows.
I do not have a Live disk.

Well. Fastboot works. But how do I get this thing rooted now?
I've flashed the phone with two recovery.img files so far. It doesn't seem to root it or change anything.
Used these two guides:
Ulefone Armor 3/3T customization
I just received my Ulefone Armor 3 and started customization. (http://ulefone.com/products/armor3/features.html) So far I have came upon several issues, some of which you'll find below: 1) I have searched everywhere for a TWRP port and root...
forum.xda-developers.com
unofficial twrp 3.3.1 Root Ulefone Armor 3W - unofficial twrp
Download twrp 3.3.1 Root Ulefone Armor 3W, user who own Ulefone Armor 3W can root it by following the below instructions
unofficialtwrp.com

See this thread... On the first page are the files (TWRP etc) that you need, and the instructions. I have rooted my 3WT in the past two days sucessfully. Good luck.

Here is the relevant post (hope I don't break and rules...)
=====================================================
=====================================================
Instructions:
1. Flash recovery.img via spflashtool or platformtools.
2. Boot to TWRP.
Touchscreen is not working properly in TWRP on our gadgets. You need to use OTG cable and mouse. Skip enter password form. Default language is russian so you can choose your in options.
3. Install disable force encryption and magisk (if you need root) via TWRP.
4. Boot to system. Enjoy.
Download link (merge go ogle together)
drive.go ogle.com/open?id=1J0HlsJYTyJUGAHjIXYMDUXye4DD9kEAC
Click to expand...
Click to collapse
Here is a clickable download link: https://drive.google.com/drive/folders/1J0HlsJYTyJUGAHjIXYMDUXye4DD9kEAC
For anyone following these are the steps i did (assuming you unlocked bootloader already):
1. Copy both zips to external sd as internal storage wont work at first
2. adb reboot bootloader
3. fastboot flash recovery recovery.img
4. unplug usb and hold power button until screen turns off
5. let go of power button, count to 2, press and hold power button and volume up together until screen turns back on
6. let go of power button when screen turns on but keep holding volume up until you see TWRP screen
7. as above post said, cancel password and swipe to enter main menu and then one square above the bottom right to enter the language menu
8. flash both zips from external sd card
9. format data (not wipe but format to get rid of encryption) - i rebooted after flashing the zips and had to go back to recovery again to format the data !THIS DOES A FACTORY RESET!
10. reboot to system this will cause it to be set up as new
11. reboot to recovery again, this time there should be no password and in install you should be able to see internal storage of the phone
12. flash magisk / anything else you want

radiomean-uk said:
Here is the relevant post (hope I don't break and rules...)
=====================================================
=====================================================
Here is a clickable download link: https://drive.google.com/drive/folders/1J0HlsJYTyJUGAHjIXYMDUXye4DD9kEAC
For anyone following these are the steps i did (assuming you unlocked bootloader already):
1. Copy both zips to external sd as internal storage wont work at first
2. adb reboot bootloader
3. fastboot flash recovery recovery.img
4. unplug usb and hold power button until screen turns off
5. let go of power button, count to 2, press and hold power button and volume up together until screen turns back on
6. let go of power button when screen turns on but keep holding volume up until you see TWRP screen
7. as above post said, cancel password and swipe to enter main menu and then one square above the bottom right to enter the language menu
8. flash both zips from external sd card
9. format data (not wipe but format to get rid of encryption) - i rebooted after flashing the zips and had to go back to recovery again to format the data !THIS DOES A FACTORY RESET!
10. reboot to system this will cause it to be set up as new
11. reboot to recovery again, this time there should be no password and in install you should be able to see internal storage of the phone
12. flash magisk / anything else you want
Click to expand...
Click to collapse
This seems promising, this is the only image I've found that got TWRP installed. Although, It looks like the touch screen will not work in the TRWP recovery mode. I'll have to try to find a USB-C male to USB-A female adapter for a mouse.

radiomean-uk said:
Here is the relevant post (hope I don't break and rules...)
=====================================================
=====================================================
Here is a clickable download link: https://drive.google.com/drive/folders/1J0HlsJYTyJUGAHjIXYMDUXye4DD9kEAC
For anyone following these are the steps i did (assuming you unlocked bootloader already):
8. flash both zips from external sd card
Click to expand...
Click to collapse
So, I'm stuck here. I'm unable to get those .zip files to my phone. I've tried doing the SDcard like you said, twrp doesn't list it anywhere. (Maybe it only accepts a particular SDcard format?)
I have also tried an ADB Sideload which just gets stuck on 0% when transferring a file. Both on Linux Ubuntu, and Windows 10.
A flash drive or any USB storage isn't really an option as I have to use it for a mouse.

You need a usb hub so you can plug in a mouse and a flash drive - TWRP is a bit shaky!
Put the zip files on the (external) usb drive and you will be fine...
This is the full thread - https://forum.xda-developers.com/t/ulefone-armor-3w-3wt.3969217/page-8#post-84304395
Cheers!

radiomean-uk said:
You need a usb hub so you can plug in a mouse and a flash drive - TWRP is a bit shaky!
Put the zip files on the (external) usb drive and you will be fine...
Click to expand...
Click to collapse
To my surprise, I found a USB hub, however, I'm unable to find the USB drive. Where exactly do I find it?
I've looked through Select Storage, And Mount.
With some research, I've found that the USB is supposed to be under OTG. But it doesn't let me select it... So, I guess I'm SOL?
EDIT: With my stupidity at fault. I never checked if the USB drive had a secure connection... I didn't, I now reseated it properly and am now installing what is needed.

radiomean-uk said:
You need a usb hub so you can plug in a mouse and a flash drive - TWRP is a bit shaky!
Put the zip files on the (external) usb drive and you will be fine...
This is the full thread - https://forum.xda-developers.com/t/ulefone-armor-3w-3wt.3969217/page-8#post-84304395
Cheers!
Click to expand...
Click to collapse
Thank you for helping. My phone is now rooted!

radiomean-uk said:
Here is the relevant post (hope I don't break and rules...)
=====================================================
=====================================================
Here is a clickable download link: https://drive.google.com/drive/folders/1J0HlsJYTyJUGAHjIXYMDUXye4DD9kEAC
For anyone following these are the steps i did (assuming you unlocked bootloader already):
1. Copy both zips to external sd as internal storage wont work at first
2. adb reboot bootloader
3. fastboot flash recovery recovery.img
4. unplug usb and hold power button until screen turns off
5. let go of power button, count to 2, press and hold power button and volume up together until screen turns back on
6. let go of power button when screen turns on but keep holding volume up until you see TWRP screen
7. as above post said, cancel password and swipe to enter main menu and then one square above the bottom right to enter the language menu
8. flash both zips from external sd card
9. format data (not wipe but format to get rid of encryption) - i rebooted after flashing the zips and had to go back to recovery again to format the data !THIS DOES A FACTORY RESET!
10. reboot to system this will cause it to be set up as new
11. reboot to recovery again, this time there should be no password and in install you should be able to see internal storage of the phone
12. flash magisk / anything else you want
Click to expand...
Click to collapse
I'm also attempting to
TOG_WAS_HERE said:
I've been trying to root my Ulefone armor 3WT for about a year now and still haven't gotten anywhere.
Here is how far I've gotten so far (with issues);
1. Fastboot commands - Cannot do fastboot commands in CMD, correct drivers are installed. Fastboot in CMD cannot find the device when the phone boots into fastboot mode. I can use ADB just fine.
2. The MediaTek flash tool - Cannot find a proper .scatter file to flash to the phone, nor can I create one.
People seem to be having lots of luck with number one, but I cannot figure out how they're getting fastboot to work in CMD.
Would like some help from anyone that has rooted this type of phone, or just any suggestions to help me with this thing.
Solved, (by radiomean-uk) follow this guide:
Click to expand...
Click to collapse
I tried the steps that are mentioned in this thread with my Ulefone Armor 3W and was unsuccessful. I've been trying to attempt to root my phone for too long. I'm running a Linux Mint OS on both desktop/laptop and since I'm also a noob with Linux OS I've been struggling to make it work.
Any help is appreciated, especially since this thread is already solved.
Thank you in advance for any help