Hello J6 users! I present you my first custom kernel for this phone. It has some pretty cool features. They are:
● Prerooted with Magisk 18.1
● SELinux Permissive
● Deleted all kinds of security measures like DM-Verity, RMM, Knox, TIMA, defex
● 5V/2A charging support (needs charger and cable that can supply it)
● CPU overclock to 1.7GHz (original 1.6)
● GPU overclock to 1.3GHz (original 1.0)
● Fsync on/off support
● CRC on/off support
● SafetyNet patched
● Overclock screen refresh rate to 64Hz
● CPU and GPU undervolt for optimal battery life and thermals
● Added tons of custom CPU governors and I/O schedulers
● Boeffla Wakelock Blocker
● Ultra Kernel Samepage Merging
● FRANDOM support
● Reduced time to sleep
● Wireguard support
● ARCH power support
● Prop tweaks including 1080p youtube playback support
● Undervolted display, touchpanel, vibrator motor and sensors for better battery life
● Disabled Exynos Input Booster
● Disabled Exynos GPU DVFS
● Spectrum proffiles support with optimized presets (can be found in the integrated OxygenControl app)
● Built with Linaro 7.4.1 toolchain
● Kernel base J600GDXU3ARL1
● Ramdisk base J600GUBS3ASA7 (January patch)
The kernel is thoroughly tested on SM-J600G but it should work on all J6 variants.
Supported variants:
SM-J600FN - Working
SM-J600F - Working
SM-J600G - Working
SM-J600GT - Working
SM-J600GF - Working (untested, please give feedback)
SM-J600N - Working (untested, please give feedback)
SM-J600L - Working (untested, please give feedback)
Download links:
MOD EDIT: Link Removed
Installation instructions
1. You need a custom recovery installed like TWRP, a link to can be found here. Follow the instructions carefully and strictly to install it.
2. Boot into TWRP then go to Install and navigate to the kernel zip file. Click on it and swipe to install. Everything will go automatically.
3. Once it finishes you are basically done, reboot your phone and enjoy.
And finally, here are some screenshots from my fellow testers:
As a end note, a lot of work and testing has gone trough this kernel to make it where it is now, and all this kernel was done blindly without a device, so any donations would be appreciated. Thanks for understanding and using my kernel
Credits:
@renoxtv obviously
@ananjaser1211 and @corsicanu for many commits and help with troubleshooting
@BlackMesa123 for RMM patches
@topjohnwu for Magisk
@DarkLord1731 for making oxygen control app and Spectrum proffiles for 7870
And the guys who went trough my torture of testing everything
XDA:DevDB Information
[KERNEL][22.02.2019]Phoenix Kernel V3.6 for the Galaxy J6 2018, Kernel for the Samsung Galaxy J
Contributors
renoxtv
Source Code:MOD EDIT: Link Removed.
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V3.6
Stable Release Date: 2019-02-22
Created 2019-02-17
Last Updated 2019-02-22
Reserved
Q&AQ: Why is my OEM Unlock turned off?
A: Don't worry about it. Some weird stuff happening there, it's still on tho.
Q: Will you add AOD?
A: No. Not because I don't want, because it's impossible. Trust me, me and other devs tried alot.
Q: Will you add X feature?
A: If it's possible to add and if it's not stupid.
Join here to get updates about my kernelI have made a Telegram channel for updates on my kernel, maybe betas too.
Link: https://t.me/PhoenixKernelA6J6
Reserved
For reporting bugsSo if there occurs a bug in the kernel, here are what you should do to help me fix that. Remember I work without a device so I can't replicate bugs myself.
1. Write your phone's model number
2. Write your phone's CSC code
3. Write your security patch level
4. Do you have any magisk modules installed?
5. Explain the issue with details
6. Replicate the issue, then boot straight to TWRP. From there go to Advanced > File Manager and navigate to /proc. Then find a file named last_kmsg, copy that to your internal storage or SDcard and upload it somewhere then send it in my XDA PM or Telegram PM at username MITKO7411XD
Nice, congrats!
Works in J600G variant sir, please update
Just have to test battery life and stuff
does not download files via mobile client 4pda
on other kernels it works ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Awesome! Works flawlessly on my J600F. Great performance, yet maintains long battery life. Thanks!
renoxtv said:
Hello J6 users! I present you my first custom kernel for this phone. It has some pretty cool features. They are:
● Prerooted with Magisk 18.1
● SELinux Permissive
● Deleted all kinds of security measures like DM-Verity, RMM, Knox, TIMA, defex
● 5V/2A charging support (needs charger and cable that can supply it)
● CPU overclock to 1.7GHz (original 1.6)
● GPU overclock to 1.3GHz (original 1.0)
● Fsync on/off support
● CRC on/off support
● SafetyNet patched
● Overclock screen refresh rate to 64Hz
● CPU and GPU undervolt for optimal battery life and thermals
● Added tons of custom CPU governors and I/O schedulers
● Boeffla Wakelock Blocker
● Ultra Kernel Samepage Merging
● FRANDOM support
● Reduced time to sleep
● Wireguard support
● ARCH power support
● Prop tweaks including 1080p youtube playback support
● Undervolted display, touchpanel, vibrator motor and sensors for better battery life
● Disabled Exynos Input Booster
● Disabled Exynos GPU DVFS
● Spectrum proffiles support with optimized presets (can be found in the integrated OxygenControl app)
● Built with Linaro 7.4.1 toolchain
● Kernel base J600GDXU3ARL1
● Ramdisk base J600GUBS3ASA7 (January patch)
The kernel is thoroughly tested on SM-J600G but it should work on all J6 variants.
Supported variants:
SM-J600FN - Working (untested, please give feedback)
SM-J600F - Working
SM-J600G - Working
SM-J600GT - Working
SM-J600GF - Working (untested, please give feedback)
SM-J600N - Working (untested, please give feedback)
SM-J600L - Working (untested, please give feedback)
Download links:
Please note that any version lower than v3.5 supported Galaxy A6 only
PhoenixKernel V3.5 [17.02.2019]: Google Drive
Installation instructions
1. You need a custom recovery installed like TWRP, a link to can be found here. Follow the instructions carefully and strictly to install it.
2. Boot into TWRP then go to Install and navigate to the kernel zip file. Click on it and swipe to install. Everything will go automatically.
3. Once it finishes you are basically done, reboot your phone and enjoy.
And finally, here are some screenshots from my fellow testers:
As a end note, a lot of work and testing has gone trough this kernel to make it where it is now, and all this kernel was done blindly without a device, so any donations would be appreciated. Thanks for understanding and using my kernel
Credits:
@renoxtv obviously
@ananjaser1211 and @corsicanu for many commits and help with troubleshooting
@BlackMesa123 for RMM patches
@topjohnwu for Magisk
@DarkLord1731 for making oxygen control app and Spectrum proffiles for 7870
And the guys who went trough my torture of testing everything
XDA:DevDB Information
[KERNEL][17.02.2019]Phoenix Kernel V3.5 for the Galaxy J6 2018, Kernel for the Samsung Galaxy J
Contributors
renoxtv
Source Code:https://github.com/renoxtv/android_kernel_samsung_a6lte_exynos7870
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V3.5
Stable Release Date: 2019-02-17
Created 2019-02-17
Last Updated 2019-02-17
Click to expand...
Click to collapse
Hi I have J600F. And I'm on the zapatos rom with helios kernel. I installed your kernel via zip install but it did not work. It booted up. Showed starting apps. 1 to 82 and then black screen. Only white strip middle right where you pull left for edge apps panel showed. Can you maybe help,please?. Did I do something wrong maybe. Thx
Hi. Looks like some users have problems, some dont. So I advice to fully factory reset before or after flashing the kernel to work properly
I may also remove the built-in Magisk and OxygenControl app to rule out any instability
Test version is in my telegram group
J600FN user. Everything is working O.K. here.
SM-J600G (Philippines csc) not working.. i stucked in blackscreen and cannot enter twrp but i managed to fix by using offline charging just to enter twrp forcefully. I already used Oxygenkernel and Helios for J6 and this does not working on me
danicadanicadanica said:
SM-J600G (Philippines csc) not working.. i stucked in blackscreen and cannot enter twrp but i managed to fix by using offline charging just to enter twrp forcefully. I already used Oxygenkernel and Helios for J6 and this does not working on me
Click to expand...
Click to collapse
Did you unistall first the oxygen controll app?
Most of time, some errors are due to configuration from old kernel
lzimbrea said:
Did you unistall first the oxygen controll app?
Most of time, some errors are due to configuration from old kernel
Click to expand...
Click to collapse
Im using Helios 2.6 kernel for J6 not Oxygen kernel. Also screenshot posted in my previous post..
PhoenixKernel V3.6 HOTFIX is here, changelog is small this time
-Added back "bootagent" and "SKMSAgent" apps to hopefully fix ramdom apps FC or black screen
@danicadanicadanica maybe try this one, hope it works out
renoxtv said:
PhoenixKernel V3.6 HOTFIX is here, changelog is small this time
-Added back "bootagent" and "SKMSAgent" apps to hopefully fix ramdom apps FC or black screen
@danicadanicadanica maybe try this one, hope it works out
Click to expand...
Click to collapse
Will check soon thanks..
renoxtv said:
PhoenixKernel V3.6 HOTFIX is here, changelog is small this time
-Added back "bootagent" and "SKMSAgent" apps to hopefully fix ramdom apps FC or black screen
Click to expand...
Click to collapse
Tried and still black screen.. maybe its because i flashed helios kernel before and inside the zip file is:
/system/lib/libsecure_storage_jni.so
/system/lib/libsecure_storage.so
/system/vendor/lib/libsecure_storage_jni.so
/system/vendor/lib/libsecure_storage.so
danicadanicadanica said:
Tried and still black screen.. maybe its because i flashed helios kernel before and inside the zip file is:
/system/lib/libsecure_storage_jni.so
/system/lib/libsecure_storage.so
/system/vendor/lib/libsecure_storage_jni.so
/system/vendor/lib/libsecure_storage.so
Click to expand...
Click to collapse
Hi
I doubt it's that, but it somehow could be. Maybe try a clean rom without flashing helios then flash my kernel. If it still doesnt work, give logcat if you can (remember I'm working without a phone so i cant reproduce the issues)
Hi
Can you please support galaxy j4 too
Just tried this, everything works fine except for the Spectrum Gaming profile. The GPU is stuck at 343mhz even if both the minimum and maximum frequencies are maxed out, causing LOTS of lag when gaming. I play games a lot and having a custom kernel is my only way to gain extra fps.
I'll send a screenshot later. Great job on the kernel! A much better alternative to oxygen kernel :good:
EDIT: I'm having microstutters when playing games. I tried all profiles. I have an SM-J600G
why there is nothing for j6 plus I think im gonna move to j6
[email protected] said:
why there is nothing for j6 plus I think im gonna move to j6
Click to expand...
Click to collapse
Probably wait for a few months or so.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING :
This KERNEL is only for Galaxy S5 Plus LTE-A (SM-G901F/kccat6) version !
You will void your warranty after flashing this ROM (knox @ 0x1)
I'am not responsible of any damage caused to your device after flashing this KERNEL
Some reading..
First of all, I would like to thanks a lot my friend @xdamc2010 for his hard investment about making a kernel finally bootable and stable kernel for our G901F and tells me his solution to finally make this kernel living. Huge kudos to him, and also to @JDizzle80 to find the solution at the same time.
SimpleGX is only looking for simplicity and stability, trying to aim for best battery life, smoothness and performance experience, than a pure stock kernel.
I still don’t qualify myself as of a real developer, but just a basic person with some android/linux knowledge already.
As always, I’m enjoying sharing my contribution here on XDA for free, which taking me a lot of time to release, so if you can offer me a little beer, I will really appreciate that.
This kernel must be only flashed over an official Samsung ROM and not AOSP/AOKP !
Feel free to include my kernel to your ROMs / Threads but please don't forget to inform/ask first via PM and credit me in your original thread.
★ WHAT TO EXPECT ★ :
(over a pure stock kernel) :
Best battery life experience.
Much better overall performance.
Efficient (only proven to be good ones and not affecting battery life) tweaks.
Stay as close as possible from stock source.
★ FEATURES (up-to-date) ★ :
Base :
Directly based on "SM-G901F_KK_Opensource.zip" (XXU1ANH5) KitKat Android 4.4.4 source from Samsung (for clean work and stability)
Compiled with Linaro Cross Compiler (4.9.4 / 2015.06) toolchain (optimized for Cortex-A15) with optimization flags.
Ramdisk from XXU1ANK5
Main :
ZZMoove (v1.0 beta8) governor added
ZRAM enabled with LZ4 compression and set as default
TCP congestion control modules activated: Westwood (currently as default), reno, bic, cubic and htcp
SElinux set to "Permissive"
init.d support
DriveDroid support
Various tweaks :
Android logger disabled
Kernel logger disabled
CRC disabled
Doubled min-max ReadAhead
random: increase entropy levels (both read and write)
slub.c: little tweak for performance improvements
Set initial TCP window size to 64K
Removes the red message "KERNEL IS NOT SEANDROID ENFORCING" during boot stage
Samsung Root restriction disabled
Features that will NEVER be included in this kernel :
auto-root.
LED control.
Charge control.
Master sequence (screen calibrated).
ABB (Adaptive Body Bias).
Any upgrade of Linux kernel 3.1x
Dual-Boot Sammy/AOSP.
CyanogenMod compatibility.
MIUI compatibility.
etc.
★ PREREQUISITE ★ :
Your device must be on KitKat Samsung firmware.
A custom recovery (CWM recommanded) to flash the kernel.
★ SOURCE (up-to-date) ★ :
Github >> SimpleGX.
★ INSTALLATION PROCEDURES ★ :
- You freshly bought your new Galaxy S5 Plus device and want to install this kernel ? follow this :
At this point, be sure to already be in XXU1ANK5 firmware (otherwise, you will face bootloop due to unmatched ramdisk),
Backup everything you need (internal & external),
Reboot in Download mode,
Flash Chenglu's unofficial custom CWM based recovery via Odin (load as AP),
Reboot to your new CWM recovery,
Flash the KERNEL,
Reboot and enjoy !
- You already is on SimpleGX ROM ? follow this :
Reboot to your CWM recovery,
Flash the KERNEL,
Reboot and enjoy !
- If you want to update your current SimpleGX KERNEL :
Backup everything you need (internal & external).
Reboot to your CWM recovery,
Flash the KERNEL,
Reboot and enjoy !
- Want to switch back to stock KERNEL ? :
Grab your matched firmware HERE,
Reboot to your CWM recovery,
Flash the KERNEL,
Reboot and enjoy !
★ DOWNLOADS LINK ★
/!\ ALWAYS CHECK MD5 BEFORE FLASHING /!\
Need supports ? all kind of questions must be posted on this thread directly. Be sure to read at least completely this first post before asking any question.
If you enjoy this kernel, don't forget to rate this thread
stars, and clicking the 'thanks' button (right below) is always appreciated to keep this thread maintained
LIKE MY WORK ?
OFFER ME A
!
Changelog
★ CHANGELOG ★ :
01.09.2015 : v1.1.5 released.
simplegx_defconfig : Disable 'CONFIG_CC_OPTIMIZE_FOR_SIZE' so size optimization will finally get active (thx kykdev for the notification).
28.08.2015 : v1.1.4 released.
ZZMoove governor updated to v1.0 beta8 (including latest fix).
Makefile : disable inline functions and add no-pic switch.
tcp_output : set initial TCP window size to 64K (speed improvement).
23.07.2015 : v1.1.3 released.
Updated cross compiler toolchain from 4.9.3-2015.03 to 4.9.4-2015.06.
19.07.2015 : v1.1.2 released.
Add DriveDroid support (thanks to @DienoX for the git merge request).
10.06.2015 : v1.1.1 released.
simplegx_defconfig: Samsung Root restriction disabled.
05.06.2015 : v1.1.0 released.
ZZMoove governor updated to v1.0 beta7a.
Updated cross compiler toolchain from 4.7.4-2014.06 to 4.9.3-2015.03.
03.05.2015 : v1.0.3 released.
Removes the red message "KERNEL IS NOT SEANDROID ENFORCING" during boot (big thanks to @xdamc2010 for the tips).
23.03.2015 : v1.0.2 released.
Add init.d support (kernel side).
21.03.2015 : v1.0.1 released.
Now compiled with Linaro Cross Compiler (4.7.4 / 2014.06) toolchain (optimized for Cortex-A15) with optimization flags.
21.03.2015 : v1.0.0 released.
Initial release (check actual features).
Thanks & greetings
★ THANKS & GREETINGS ★ :
(by alphabetic order)
Christopher83
DienoX
Lord Boeffla
slim80
xdamc2010
ZaneZam
. . . and to all people credited in my commits
Donations
★ DONATIONS ★ :
None yet.. :[
Reserved
Reserved.
Thanks for the new kernel!! Great Job!! Is there also a kernel "management program / app" to control or adjust this kernel??
Handeman707 said:
Thanks for the new kernel!! Great Job!! Is there also a kernel "management program / app" to control or adjust this kernel??
Click to expand...
Click to collapse
TricksterMOD & SetCPU are your friend apps for that, so you can change governor, tcp congestion module, some slight values, etc, but do not expect more :good:
Will it work if I'm on FXXU1ANH6?
"Setcpu" old one... Was long time on Boeffla kernel at Samsumg S3, but enjoying the S5 Plus [G901F] v4.4.4 now, speccially with your great work here!!!
Lao Mayer said:
Will it work if I'm on FXXU1ANH6?
Click to expand...
Click to collapse
You can give and report, but normally it should not boot.
Make a stock ANH6 kernel flashable zip just in case, so you will be able to boot back if it don't work.
To make short: copy and past my flashable zip, rename it "stock_kernel.zip", open it and place it your "boot.img" from your actual firmware and place it in your sdcard just to be safe in case of problem :good:
Kernel is fast:
UPDATE
★ UPDATE ★ :
21.03.2015 : v1.0.1 released.
Now compiled with Linaro Cross Compiler (4.7.4 / 2014.06) toolchain (optimized for Cortex-A15) with optimization flags.
Enjoy :highfive:
With stock SimpleGX i get a score of 51544 anf with the first version of kernel 49968.
Now gonna try second version.
Still happy, great stuff DeV
I got 50k on 1.2.3 of the rom using interactive governor
just now tested 46k using new kernel and zzmoove governor
with new kernel and interactive governor, best score out of all 3 tests 51.4k.
I will post screenshots from phone so can see which part of tests change.
Stock kernel and interactive 1426997410034
New kernel and zzmoove 1426997459226
New kernel and interactive 1426997518625
Sent from my SM-G901F using XDA Free mobile app
For those who want to revert back to stock kernel, I added a procedure into first post :good:
Cheers'
AndroidGX said:
For those who want to revert back to stock kernel, I added a procedure into first post :good:
Cheers'
Click to expand...
Click to collapse
Thanks, but kernel v1.01 is running great!!
Unlikely I will revert but is good there is now a procedure thanks.
My initial report is the phone does feel smoother to use, and in particular the play store is way more responsive.
Also the phone probably had 6 hours or so sleep time since I turned screen off and no battery drain on battery page, is flat line, not sure if thats either excellent battery life during sleep or its not been updating.
and I am using zzmoove.
chrcol said:
Unlikely I will revert but is good there is now a procedure thanks.
My initial report is the phone does feel smoother to use, and in particular the play store is way more responsive.
Also the phone probably had 6 hours or so sleep time since I turned screen off and no battery drain on battery page, is flat line, not sure if thats either excellent battery life during sleep or its not been updating.
Click to expand...
Click to collapse
Do you mean you prefer stock kernel ?
I had some drain issues with v1.0.0 which is now solved in v1.0.1 :good:
No I prefer your kernel
no issues so far.
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
It is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This thread is for Unofficial LineageOS 14.1 builds for ha3g (SM-N900). The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
Ha3g Downloads folder
Older Builds:
03/27/17 build
03/09/17 build
Audio Crashes fix for 03/09/17 build
02/19/17 build
02/09/17 build
02/07/17 build
02/03/17 build
01/31/17 build
01/26/17 build
01/18/17 build
01/16/17 build
01/07/17 build
12/27/16 build (CyanogenMod 14.1)
Google Apps:
http://opengapps.org/
Want Root access? Flash this!
LineageOS SU Addon
Flahed the SU Addon and now you want to remove it? Flash this!
LineageOS su addon Remover
04/29/2017
*In call volume has been properly fixed!
*In call mic mute has been fixed!
*Dropped Substratum support
*SELinux policy has been fixed (Kernel is permissive, but it can go enforcing without issues)
*Lots of under the hood changes!
*Updated to 7.1.2
*Built with up to date LineageOS sources
Older Changelog:
03/27/2017
*KeyDisabled is fixed! The hardware buttons do not turn on when the navbar is enabled anymore.
*HUGE RIL REWORK. Lots of fixes and stability improvements for telephony.
*Audio Has been tuned:
*Speaker sound is a bit higher,
*Headphone volume was normalized, it was to high, overdriving the channel.
*Microphone crashes have been solved
*Built with up to date LineageOS sources
03/09/2017
*New feature: One handed mode
*New feature: Keypad disabler! Disabling the keypad will enable the navbar.
*CM File Manager is gone!
*Sdcardfs has replaced fuse. 3 times faster read/write speeds!
*New mali GPU driver (r7p0 from MM release, great performance!)
*GPU OC up until 600mhz with the new driver
*Few fixes to the gpu driver
*Half of the camera HAL has been open sourced! (more stable, better support)
*Camera media sharing works properly now (Instagram, Snapchat, etc)
*Wifi Stability fixes
*The Samsung Power HAL has been fixed (more responsiveness without compromise)
*The S-PEN can now click the keypad buttons!
*Rootless Substratum Support! Rom was updated for the new substratum app!
*March security upgrade applied
*Built with up to date LineageOS sources
02/19/2017
*RIL: Stability Improvements
*Fixed potential reboot scenarios while on a call
*Fixed WiFi calibration (It is more stable now)
*SamsungDoze: Screen WILL NOT wake up on significant motion anymore
*Minimum screen brightness lowered a bit
*Media Volume steps have been doubled
*Added full OMS7 support and Masquerade app for substratum
*This build fully support substratum theming!! See instructions on post #3
*Built with up to date LineageOS sources
02/09/2017
*Fix for Bluetooth Audio reproduction
*MSAA not forced anymore, causes troubles
*Fixes for ril (the modem was not defined right, plus some changes in libril). This fix results in:
*RIL: Signal Strenght reported properly now
*RIL: No more mobile data problems
*RIL: Fixes for memory leaks
*RIL: More stability improvements
*Optimizations for the Graphics 2D driver (smoother system, more battery friendly)
*Fixes for codecs: ffmpeg sw codecs work now
*Some fixes on bionic (should improve overall system stability)
*Built with up to date LineageOS sources
02/07/2017
*Fixed bad quality on the camcoder
*Fixed problems with Android Auto
*Everything that uses the AVC/h264 encoder will work well now
*Wifi: more kernel stability patches
*Built with up to date LineageOS sources
02/03/2017
*Wifi Hotspot is fixed!! It works now!
*Stability improvements for wifi (fixes for potential wifi crashes)
*Live Display RGB tunning fixed!
*Under the hood: Stability patches for kernel
*Built with LineageOS source synced and up to date
*ROM Tagged as Stable from now on
01/31/2017
*Video Zooming issue is fixed! Now videos scale properly!
*Under the hood changes: gralloc has been updated
*New LineageOS recoder included!
*Built with LineageOS source synced and up to date
01/26/2017
*AudioFX is back! And now it works!
*Some fixes and improvements for noise cancelation
*New notification LED capabilities: you can also now choose the color of the LED!
*CPU Governors: Interactive has been tuned for better battery life
*Under the hood changes: Codecs are built from source now
*Under the hood changes: Camera Improvements (Color mode was upgraded)
*KERNEL: Fixed a race condition in the scheduler that could lead to random reboots
*New root method! New LineageOS SU Addon Packages in OP to download
*Built with LineageOS source synced and up to date
01/18/2017
*Fixed a bug that prevented ambient display from waking the screen to pulse
*Enabled the Significant Motion sensor for doze
*Fixed the Recents Apps transparent bar glitch
*No more root access by default. You are gonna have to flash it now!!
*New LineageOS Bootanimation!
01/16/2017
*Fixed auto-rotation!
*Some fixes on bionic (Will improve overall system stability)
*AmbienDisplay has been fully moved to the screen section where it belongs
*KERNEL: Fixed GPU governor table (will increase performance, improve stability)
*KERNEL:GPU OC up to 667mhz is possible now (533mhz is the default max freq)
*KERNEL:GPU control interface added for clocks, powerpolicies, thermals and voltage
*DeathlyAdiutor was updated. Now it includes fragments to control the new GPU kernel nodes.
*DeathlyAdiutor: fixed the gpu usage statistics. Yes, they were broken!
*LINEAGE: New setup wizard and a couple more things rebranded
01/07/2017
*Rebrand to LineageOS
*Fixed microphone recording (everything that uses the microphone will work from now on)
*Camcoder works now
*Fixed DRM content reproduction
*Fixed In Call Volume (reworked old safared fix)
*ScreenCast should work with sound now!
*Updated Samsung Doze for nougat
12/27/2016 (Cyanogenmod 14.1)
*Initial Release
*Sharing videos on apps like WhatsApp or Snapchat does not work.
*You tell me!
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/d....tortel.syslog
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah
@joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588)
Source Code:
Kernel
https://github.com/exynos5420/android_kernel_samsung_exynos5420/tree/cm-14.1
Device Tree
https://github.com/exynos5420/android_device_samsung_ha3g/tree/cm-14.1
XDA:DevDB Information
[7.1.x|SM-N900| Unofficial LineageOS 14.1 (ha_3g), ROM for the Samsung Galaxy Note 3
Contributors
tincho5588, tincho5588
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-02-03
Created 2016-12-27
Last Updated 2017-04-29
Reserved
Kernel Info:
M Kernel base from the Galaxy Tab S
CPU Voltage Control
CPU OverClock/UnderClock (Up to 2.1GHZ)
MIF/INT Voltage Control
Wolfson Sound Control (No Yamaha support)
UKSM instead of KSM
Added the following IO Schedulers: fifo, fiops, sioplus, tripndroid, vr, zen, bfq (Default)
Full f2fs support updated off the mainline (Stock cm kernel has limited support)
Modified Thermal Throttling temperatures for all devices so hopefully they won't get as hot
Exynos thermal exposed to sysfs
Android Logger disabled by default can be enabled over sysfs
WQ power efficient workqueues (Still need to apply in more places)
Frandom Support
Readahead bumped to 256 from 128
Max77803 charger control interface
Input boosters control interface
Root Access and Theming Guide
Want Root access??
Just flash with TWRP the LineageOS SU Addon zip file found on the download section... Flash it after you have flashed Google Apps!!!
Then enable the developer options menu with this guide:
To enable Developer Options, open the Settings screen, scroll down to the bottom, and tap About phone or About tablet.
Scroll down to the bottom of the About screen and find the Build number.
Tap the Build number field seven times to enable Developer Options. Tap a few times and you’ll see a toast notification with a countdown that reads “You are now X steps way from being a developer.”
When you’re done, you’ll see the message “You are now a developer!”. Congratulations. Don’t let this newfound power go to your head.
Tap the Back button and you’ll see the Developer options menu just above the “About Phone” section in Settings. This menu is now enabled on your device—you won’t have to repeat this process again unless you perform a factory reset.
Now go into the developers options menu and find the option to enable root access!!
Flashed the SU Addon and now you want to remove it from your phone??
Just download the LineageOS SU Addon remover and flash it with TWRP...
Excellent...
New year gift...
No words to explain happiness
Sent from my SM-N900 using XDA-Developers mobile app
first one !!LOL
TNX Martin
so it is the beta , is DA supported ??
As usual downloading first...
Thanks allot sir
Sent from my SM-N900 using XDA-Developers mobile app
downloading...
5 min to finish
booting...
pedy6990 said:
downloading...
5 min to finish
Click to expand...
Click to collapse
good for u man. my net is like snail. 3h to download
RYAN SHAY said:
first one !!LOL
TNX Martin
so it is the beta , is DA supported ??
Click to expand...
Click to collapse
DA is shipped with the rom... same as with CM13...
Under my point of view, it is fully stable... I labled it as beta until u guys test it and tell me everything is OK... that is the only reason...
RYAN SHAY said:
good for u man. my net is like snail. 3h to download
Click to expand...
Click to collapse
I'm also in ur country, khubi?
tnx for hard working and keep a live our Note 3 N900. if u have good Internet with Unlimited Size ( or Volume Whichever was true. ) tell us rom is Stable or Not ( Just to be sure. because i dont have Unlimited net. and if only have incall volume bug i download it ).
pedy6990 said:
I'm also in ur country, khubi?
Click to expand...
Click to collapse
tnx bro , I am fine.
lets stick to the thread and not to make Mods angry.
any work u had with me just pm me.
rasoulia said:
tnx for hard working and keep a live our Note 3 N900. if u have good Internet with Unlimited Size ( or Volume Whichever was true. ) tell us rom is Stable or Not ( Just to be sure. because i dont have Unlimited net. and if only have incall volume bug i download it ).
Click to expand...
Click to collapse
It is fully stable... only bug i found was the in call volume patch... I use it as daily driver...
Everything is there on OP!
tincho5588 said:
DA is shipped with the rom... same as with CM13...
Under my point of view, it is fully stable... I labled it as beta until u guys test it and tell me everything is OK... that is the only reason...
Click to expand...
Click to collapse
so it seems to be really stable. I dont know what to say.
i just have this last query , maybe its like a dumb Q , Are all of the change logs of MM included in this rom too ??
Thank you my brotheeeeerrrr.... ???
Yeah it was really stable. Fast, without laggy.
Zud bezan download arzeshesho dare. @rasoulia
tincho5588
You AMAZING DEVeloper! Thank You & Happy New Year! :victory:
Thanks my dear friend! Our device support vulkan api?
Thanks man.... Working great..... A very happy new year to you.... Keep up the good work....
Sent from my SM-N900 using XDA-Developers mobile app
Darkphyx said:
Thanks my dear friend! Our device support vulkan api?
Click to expand...
Click to collapse
No... Opengl 3.1
RYAN SHAY said:
so it seems to be really stable. I dont know what to say.
i just have this last query , maybe its like a dumb Q , Are all of the change logs of MM included in this rom too ??
Click to expand...
Click to collapse
Yes sir! All the work done in cm13 is inhereted here! That is why it was so important to polish MM...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements for using the kernel
Model Variants: SM-N910S/K/L/C/H/U, SM-N915S/K/L, SM-N916S/K/L
Tested Device: SM-N910S/K/L & SM-N915S/K/L & SM-N916S/K/L
Installed OS: TouchWiz M 6.0.1, M Base Note7 and All Porting ROMs
Main Features
• All porting ROM support.
• Fixed a screen-touch issue that occurred while waking from sleep mode.
-- Problems exist in stock(samsung) firmware.
• AnyKernel based.
• Synapse support.
• SELinux Permissive.
• Linux 3.10 upstream.
• Compile with UBERTC 7.2.1 toolchain.
• F2FS fully support.
• Gametuner-Mod: Game Booster Mode, Provides intelligent performance enhancement mode in conjunction with Samsung-Gametuner.
• Apply Fake KNOX.
• Apply chacha20 to random (entropy).
• Linaro LSK-v3.18-Energy-Aware Scheduler (EAS) Backport.
- EAS simplifies power and performance management through scheduler-driven tuning to manage more efficiently.
• Improved storage performance and longevity by applying lazytime mount options.
- Similar to Dynamic Fsync, but operates at the file system level and has no risk of data loss.
• CPU/GPU UC & OC.
• CPU/GPU/BUS voltage regulation.
• R12P0 GPU Driver(Stock is R7P0) & Performance Tuning.
• NVIDIA cpu relax patch, reduced heat & increased battery life.
• HMP tuning Interface.
• Enable NEON in kernel mode.
• Detail charging circuit control allows faster charging.
• Added I/O Scheduler 'bfq, fifo, fiops, row, sio, zen'.
• Enable Westwood tcp/ip congestion control.
• LED FADE control.
• Qualcomm interactive (renamed cafactive) cpu governor porting @by arter97.
• Added battery-friendly impulse governor and more powerful ironactive (interactive in the Qualcomm 4.4 kernel) governor.
• Provides an add-on that keep kernel settings on un-rooted devices.
• Synapse: System Tweak add-on available.
• Synapse: Provides configuration profile separated by performance / battery / stability.
• Many other optimization applications.
Credit (Thanks. to)
• AndreiLux - Perseus5433 kernel.
• UpInTheAir - SkyHigh Kernel.
• halaszk - Perseus-halaszk-universal5433 kernel.
• arter97, gokhanmoral, faux123, yank555.lu
• RaymanFX (AOSP Kernel & Vendor).
• osm0sis - AnyKernel2.
• All members of the PRIME-Kernel NaverCafe.
• And all of commited in sources & all of xda developers.
Change Log
Detail(Korean): http://enfree.com/prime/?page=changelog&device=N910
Note: AnyKernel method
Kernels that use AnyKernel method do not have built-in ramdisks; instead they extract and merge with currently installed ramdisk on the fly while installing.
This can help improve compatibility with certain carriers, but can also cause problems if flashed upon another custom kernel.
Thus it is highly recommended that you have a stock kernel installed beforehand when flashing this kernel.
Download
Stable - v6.4.1
* The N910C/H/U variants needs testing.
Older Version
Stock Kernel Link
Note 4 (N910x) | Note Edge (N915x) | Note 4 S-LTE (N916x)
! This is not a prime kernel.
After downloading, please flash in TWRP. automatically detect and flash all variants.
Built-in Stock Kernel List
N910C-XXS2DQHC / N910H-XXS2DQH5 / N910U-XXS2DQHF
N910S-KSU2DQD4 / N910L-KLU2DQD4 / N910K-KTU2DQD1
N915S-KSU2DQE1 / N915L-KLU2DQE1 / N915K-KTU2DQE1
N916S-KSU2DQD4 / N916L-KLU2DQD4 / N916K-KTU2DQD4
Telegram Group: https://t.me/prime_n4
Naver Cafe (for Korean): http://cafe.naver.com/primeusers
XDA:DevDB Information
PRIME-Kernel, Kernel for the Samsung Galaxy Note 4
Contributors
Hyunwoo AHN
Source Code: https://github.com/dwander/Linaro-base/tree/trelte
Kernel Special Features: Linaro-LSK-3.18-EAS-Backport, Gametuner-MOD, Intelli-Performance
Version Information
Status: Beta
Current Stable Version: 6.4.1
Stable Release Date: 2017-10-14
Created 2017-10-07
Last Updated 2017-11-28
tried this, but the anykernel only supports stock kernel? im sure most n910c users use graceux roms and they dont work with stock kernels. i tried with h vitamin which is the most close to stock ux kernel i can find but prime kernel does not support it
Do we have fast charge script on this kernel?
nice work, now testing on n910c running erobot rom, i will edit this post if anything unexpected happened
Update:
@Hyunwoo AHN error while installing in twrp: variant: n910c, os: touchwiz base -> error: n910eur-tw-zImage not found
it cant detect the n910ch-tw-zimage from kernel files
awesome awesome awesome,,
F2FS + FIOPS in 1 kernel. FINALLY ... this is truly the best (minus encryption concerns?)
wonderful work sir. will test out on my U variant and report back.
if only there was a ROM that supported f2fs, I cant get modem to work on this kernel N910U variant.
Updater process ended with ERROR: 1
robert1337 said:
tried this, but the anykernel only supports stock kernel? im sure most n910c users use graceux roms and they dont work with stock kernels. i tried with h vitamin which is the most close to stock ux kernel i can find but prime kernel does not support it
Click to expand...
Click to collapse
You do not seem to understand my writing.
When flashing the kernel, extract the ramdisk from the existing kernel, convert the ramdisk properly and merge it.
It is best to use this kernel after flashing the stock kernel first.
Of course you can use another developer's kernel (ramdisk), but as I said, there is a possibility of errors, so flash the stock kernel first if possible.
As I said, GraceUX ROM works well.
KINGTATu said:
nice work, now testing on n910c running erobot rom, i will edit this post if anything unexpected happened
Update:
@Hyunwoo AHN error while installing in twrp: variant: n910c, os: touchwiz base -> error: n910eur-tw-zImage not found
it cant detect the n910ch-tw-zimage from kernel files
Click to expand...
Click to collapse
There was a mistake in the flashing script.
Wait for the next version or decompress and rename the file yourself.
Updated to v6.4.0 (stable)
Is there a way to create a unique serial number for your phone in your kernel and disable your phone?
I am referring to the contents of the Korean community.
What does the curl package do inside the kernel? Is synapse reinstalled every time it boots to disable the user's phone based on the generated serial number?
imrus1252 said:
Is there a way to create a unique serial number for your phone in your kernel and disable your phone?
I am referring to the contents of the Korean community.
What does the curl package do inside the kernel? Is synapse reinstalled every time it boots to disable the user's phone based on the generated serial number?
Click to expand...
Click to collapse
Use curl to generate a unique serial number.
The serial number is used to download add-ons for donor users and not for other purposes.
이런 질문 좆나 불쾌하네요.
Hyunwoo AHN said:
You do not seem to understand my writing.
When flashing the kernel, extract the ramdisk from the existing kernel, convert the ramdisk properly and merge it.
It is best to use this kernel after flashing the stock kernel first.
Of course you can use another developer's kernel (ramdisk), but as I said, there is a possibility of errors, so flash the stock kernel first if possible.
As I said, GraceUX ROM works well.
Click to expand...
Click to collapse
i think it was you who dont understand what i mean, but then again i explained not so clearly so i guess its my fault.
what i meant is this error: n910eur-tw-zImage not found
but i dont understand what you said "When flashing the kernel, extract the ramdisk from the existing kernel, convert the ramdisk properly and merge it."
dont you mean i just flash the most close to stock ux kernel first then flash Prime anykernel?
because i dont think my device will boot if i flash stock kernel you provided because im using UX rom.
UX roms need stock UX kernel (modified something in ramdisk i forgot what is it)
robert1337 said:
i think it was you who dont understand what i mean, but then again i explained not so clearly so i guess its my fault.
what i meant is this error: n910eur-tw-zImage not found
but i dont understand what you said "When flashing the kernel, extract the ramdisk from the existing kernel, convert the ramdisk properly and merge it."
dont you mean i just flash the most close to stock ux kernel first then flash Prime anykernel?
because i dont think my device will boot if i flash stock kernel you provided because im using UX rom.
UX roms need stock UX kernel (modified something in ramdisk i forgot what is it)
Click to expand...
Click to collapse
It 's hard to explain because I do not know English well.
Do not worry about using GraceUX ROM, do not worry about it.
The error you say is my mistake as I said in other posts. And obviously I said that some variants need testing.
N910C, touchwiz os, Prime kernel v6.4.0:
@Hyunwoo AHN Phone won't boot and in restart loop at boot logo
excellent news for 910f needs testing still?
N910U installation failed
TWRP Error code:1
ROM:NEMESIS REFINED V3.8
Cannot download. Link dead and show 404 error...
vinamilk said:
Cannot download. Link dead and show 404 error...
Click to expand...
Click to collapse
i suggest you not to download the kernel yet, your phone probably wont boot (n910c), wait for an update from @Hyunwoo AHN to fix the issue
Damn it!
v6.3.0 was linked. -_-;
I just fixed the download link.
n910u got a bootloop after flash this kernel...
anyway, thanks for your work
Updated to v6.4.1
Add custom build dtb, with N910C/H/U.
fix configs, with N910U variant.
*** Need test ***
However, the Korean variants(S/K/L) works perfectly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- This kernel works only on A530F/W and A730F. I'm not responsible for any damage if you flash on other devices.
- I am not responsible about any damage of any kind that this kernel may cause.
- You are allowed to use this kernel in your project with proper credits and links to the thread or source code.
- Bugs can be reported in XDA or via my Telegram Group. Make sure you provide detailed info when reporting bugs (device variant and logcat).
- If you like my work please hit the "Thanks" button and feel free to donate to me via my paypal.
- Built from A530FXXU4CSC3 source code
- Supports Android Pie
- Supports Android Q (only GSI)
- Build with Linaro 7.4.1 Toolchain
- SELinux Permissive
- Init.d support
- Faked Knox 0x0 flag
- SafetyNet patched
- WireGuard Support
- LED Fading
- NTFS Support
- Underclock big/LITTLE to 200/500MHz
- Early-mount system partition
- Private Mod support
- Powersuspend Driver for display
- Multi CPU Governors
- Multi I/O Schedulers
- Multi TCP Algorithms
- Enabled NFS support
- Enabled CIPS support
- Enabled CD/DVD File System
- Added UKSM support
- Drivedroid support (0.10.48+)
- ADB Insecure
- TTL Target enabled
- Limited Wakelocks
- Dynamic Fsync 2.0
- GMS Blocker
- StateNotifier & SysfsHelper
- Optimized Deadline I/O
- CRC Disabled by default
- 99Killer service (kills gms in idle for better sleep)
- SecBattery control and Unstable current detection
- Security Related Features disabled
- Full Wakelock Control for wlan/bt and much more
- Other improvments for Batterylife and performance
- Boeffla wakelock blocker v1.1.0 With preconfigured WLs
And many more listed in changelogs below!
- SM-A530F
- SM-A530W
- SM-A730F
1. - Install a Custom Recovery with Odin3
2. - Download the kernel zip
3. - Copy the kernel zip into your phone
4.- Reboot in Recovery Mode
5. - Flash the Kernel Zip
6. - Enjoy!
Download links in Post #2
- Samsung for kernel sources
- @BlackMesa123 , @ananjaser1211, @corsicanu for alots of Contribution
- @Noxxxious for some commits
- @Tkkg1994 for his ramdisk custom scripts
- @TaifAljaloo , @587.saboor , @Hovo01 , @jthedane testing the kernel
XDA:DevDB Information
Quantum Pie, Kernel for the Samsung Galaxy A8 (2018)
Contributors
prashantp01
Source Code: github.com/prashantpaddune/universal7885
Version Information
Status: Stable
Current Stable Version: v4
Created 2019-04-13
Last Updated 2019-04-21
v4.0:
| OneUI |
- Under volt Big to 500mhz
- Removed Audit from sources for better performance
- Disabled all debug logs
- Fixed LED implementation
- Enabled CD/DVD File System
- Fixed Adb popup
- Force zswap only for LZ4
- Removed Dex support
- Some other minor optimisations to improve idle and battery life.
and many more
| GSI |
- Added Android Q support
- Undervolt Big to 500mhz
- Removed Audit from sources for better performance
- Disabled all debug logs
- Fixed LED implementation
- Enabled CD/DVD File System
- Fixed Adb popup
- Switched zswap only for LZ4
- Some other minor optimisations to improve idle and battery life.
and many more
v3.0:
- Added hKtweaks app for kernel tuning. ( Thanks @corsicanu )
- Fixed Root for Magisk-19.0+
- Fixed lags because of SELinux
- Fixed random reboots
- Improved Ram management
- Fixed issues with Wifi
- Some other minor optimizations to improve idle and battery life.
and many more
v2.0:
- Build with Linaro 7.4.1
- Switched from Zswap to ZRam.
- Permissive by default
- Fixed Fake knox 0x0 with SafetyNet (Samsung health,Snapchat,etc..)
- Fixed lags because of SElinux
- Enabled NFS support
- Enabled CIPS support
- Drivedroid support (0.10.48+)
- Removed Display State
- Added UKSM support
- Enabled Google Play Services Wakelock Fix
- Added Deep Sleep Fix by @Chainfire (from SuperSU)
- Improved Ram management
- Disabled KnoxGuard (New RMM)
- Fixed issues with Wifi
- Some other minor optimizations to improve idle and battery life.
and many more
v1.0:
Initial Release
Kernel - ONEUI
Kernel - GSI
Reserved
Thanks this was needed alot.
I installed this kernel on SM-A530F D/S, Android 9 Pie. After installing the boot is much slower and after boot it takes longer to open the widget. I can't connect phone with Wi-Fi. The rest is O.K. It is for me.
Can I install in a rooted phone? I mean, do I have to do a factory reset or something like that?
How does this support calls recording?
ZmisiS said:
I installed this kernel on SM-A530F D/S, Android 9 Pie. After installing the boot is much slower and after boot it takes longer to open the widget. I can't connect phone with Wi-Fi. The rest is O.K. It is for me.
Click to expand...
Click to collapse
1) Boot is slower because of samsung heavy ui
2) widget takes longer because.....it needs time get settle...and oneui is still in initial stage from samsung for device
3) WIFI issues is figured out and its fully fixed...so wait for next version
absvini said:
Can I install in a rooted phone? I mean, do I have to do a factory reset or something like that?
Click to expand...
Click to collapse
no just flash the kernel zip and you are good to go
ziatnine said:
How does this support calls recording?
Click to expand...
Click to collapse
call recording?
prashantp01 said:
call recording?
Click to expand...
Click to collapse
Call recording.
https://nllapps.com/apps/acr/android9.htm#
ziatnine said:
Call recording.
https://nllapps.com/apps/acr/android9.htm#
Click to expand...
Click to collapse
I've added the feature to my CSC file and call recording works very well.
Look for this in your cscfeature.xml file and add if needed. Or edit it.
<CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
I checked my recordings (saved to external sd card) and they're all fine.
mindlery said:
I've added the feature to my CSC file and call recording works very well.
Look for this in your cscfeature.xml file and add if needed. Or edit it.
<CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
I checked my recordings (saved to external sd card) and they're all fine.
Click to expand...
Click to collapse
I have not CSC File. Where exactly should I add CSC File? When i add a CSC File what I need save or write to it?
Ok. Can you tell me what model you're using? A530F maybe? Also, what carrier do you use?
Are you rooted or not?
Basically it's a system file in text that can be altered easily to allow or disallow features on your phone. It's likely in /system/omc/your carrier/ in your phone. So, if you follow my way, you'll need to root because i'm lazy and i am not sure if you can do it via adb on your end... or mine haha.
mindlery said:
Ok. Can you tell me what model you're using? A530F maybe? Also, what carrier do you use?
Are you rooted or not?
Basically it's a system file in text that can be altered easily to allow or disallow features on your phone. It's likely in /system/omc/your carrier/ in your phone. So, if you follow my way, you'll need to root because i'm lazy and i am not sure if you can do it via adb on your end... or mine haha.
Click to expand...
Click to collapse
SM-A530F, Android Pie 9, rooted. I followed the path (/system/omc/my carrier/) you set up here, I rebooted my phone and now everything works right. Thank you.
ZmisiS said:
SM-A530F, Android Pie 9, rooted. I followed the path (/system/omc/my carrier/) you set up here, I reboot my phone and now everything works right. Thank you.
Click to expand...
Click to collapse
Really? That's great! There's more you can add. Just have a look around and you'll discover more. Maybe try out this kernel?
So the file wasn't encrypted? Or you're just quick. I forgot about that.
mindlery said:
Really? That's great! There's more you can add. Just have a look around and you'll discover more. Maybe try out this kernel?
So the file wasn't encrypted? Or you're just quick. I forgot about that.
Click to expand...
Click to collapse
I have cscfeture.xml and cscfeature_network.xml of 22.11.2018. I replaced this file, restarted phone and it is it.
ZmisiS said:
SM-A530F, Android Pie 9, rooted..
Click to expand...
Click to collapse
Is it stock rooted or custom?
ziatnine said:
Is it stock rooted or custom?
Click to expand...
Click to collapse
Stock.
Cool
So, in order to edit that file I can do rooting only, can't I?
What's with further official updates? Do they still work after rooting?
ziatnine said:
Cool
So, in order to edit that file I can do rooting only, can't I?
What's with further official updates? Do they still work after rooting?
Click to expand...
Click to collapse
Yes, only on rooted Android.
After rooted Android not have official updates and you lose the warranty on your device.
You have csc files here:
https://forum.xda-developers.com/ga...s-news--discussion/call-record-a530f-t3870529
ZmisiS said:
Yes, only on rooted Android.
After rooted Android not have official updates and you lose the warranty on your device.
You have csc files here:
https://forum.xda-developers.com/ga...s-news--discussion/call-record-a530f-t3870529
Click to expand...
Click to collapse
Well, given that A8'18 is going to end of support pretty much soon this year (or early next year, which does not really make a lot of difference), security patches may not be the most concerning thing against the rooting already now
Welcome to fsociety, friend!
This is my vision of how Pixel 4/XL should run. I'm using Artemis from KuranKaname as a base. I'm pulling features from all kinds of places like Artemis, CleanSlate, Kirisakura and more, just trying to create the best experience possible for the device.
Features
- Upstreamed to latest linux-stable
- CleanSlate features merged- all credits to @tbalden
- Efficient frequencies set for speed
- Little cluster using performance governor to reduce schedutil overhead
- Simple_LMK from Sultan
- Memory leak fixes
- Wireguard support
- Vibration control
- BBR tcp defaulted and optimized
- Cpumask enabled for all clusters
- Software key debouncer
- Franco Kernel Manager flasher support
- Various other optimizations, tweaks & fixes
Download & Links
Download zip: https://sourceforge.net/projects/fsociety-kernel/files/fsociety#3.14.zip/download
Download img: https://sourceforge.net/projects/fsociety-kernel/files/fsociety#3.14.img/download
Franco Kernel Manager custom json: https://raw.githubusercontent.com/fsociety-kernel/pixel4/master/fkm/fkm.json
Telegram group: https://t.me/fsociety_p4xl
Donations: https://www.paypal.me/wrongway213
Installation instructions
- If on stock ROM/stock kernel or custom ROM with the baked in kernel it comes with - simply flash this in FKM/EXKM
- If on another kernel - flash the dtbo.img and boot.img that come with the factory image or custom ROM you are on. Then flash this kernel in FKM or EXKM.
- If using Franco Kernel Manager, you can simply use the custom json linked above for auto-flashing as the kernel supports it.
Changelog
stable #3.14 changelog
- Linux 4.14.210
- uci: userland: add blur switch thru resetprop/restart for systemui
- f2fs: Fix deadlock between f2fs_quota_sync and block_operation
- binaries: update hosts with latest Steve Black's repo/adaway/yoyo
- dsi: phy: add in-driver: Power off DSI PHY during idle PC
- dsi: panel: add in-driver ULPS enabling
- Merged latest AnyKernel3 changes from osm0sis
Thanks
@KuranKaname for his awesome base, his personal guidance, & also for his contributions
@tbalden for making CleanSlate available & his contributions
@Freak07 for helping me with issues personally & also for his contributions
@NYCHitman1 for his awesome base for past Q builds
@Dabug123 for his contributions
@flar2 for his contributions
@kingbri for his contributions
@Sultanxda for his contributions
@kdrag0n for his contributions
@arter97 for his contributions
@osm0sis for AnyKernel
@nathanchance for compilation guide
@Subl1m1nal1 for being an awesome tester
@bbender716 for testing R all by himself
@12Fully for being an awesome tester
@The Laser Bear for being an awesome tester
XDA:DevDB Information
fsociety for Pixel 4/XL, Kernel for the Google Pixel 4 XL
Contributors
wrongway213
Source Code: https://github.com/fsociety-kernel/pixel4
Kernel Special Features: Kernel with stuff and things
Version Information
Status: Stable
Current Stable Version: 3.14
Stable Release Date: 2020-12-06
Created 2020-01-15
Last Updated 2020-12-06
Reserved
Reserved #2
Glad I could help in any way. Thank you, sir.
Been using the kernel since last night and everything working well for me so far.
alpha #1.02 is here
https://www.androidfilehost.com/?w=files&flid=304296
1.02 changelog-
- Removed wake gestures as they break deep sleep
- Disabled CONFIG_WQ_POWER_EFFICIENT_DEFAULT to test for more responsiveness
Support: https://paypal.me/wrongway213
Flash and enjoy
alpha #1.03
https://www.androidfilehost.com/?fid=4349826312261702995
1.03 changelog:
- Limit big and prime cluster max freqs
- jump label optimizations
Donations: https://paypal.me/wrongway213
Flash and enjoy!
Thanks for the kernel. It seems that your kernel doesn't like ainur narsil mod (similar with Franken kernel). Phone gets unresponsive with ainur mod. When i deactivate the mod and restart the phone its working fine. Just for info.
Donric13 said:
Thanks for the kernel. It seems that your kernel doesn't like ainur narsil mod (similar with Franken kernel). Phone gets unresponsive with ainur mod. When i deactivate the mod and restart the phone its working fine. Just for info.
Click to expand...
Click to collapse
Weird. I haven't had any issues with Narsil installed.
bbender716 said:
Weird. I haven't had any issues with Narsil installed.
Click to expand...
Click to collapse
What other modules do you have? I have v4a and wireguard tools apart from ainur. How did you flash it (coming from other custom kernel)? I first flashed stock magisk patched kernel and dtbo. Then flashed this kernel through fkm.
How well does bbr work in comparison to, let's say westwood?
Donric13 said:
Thanks for the kernel. It seems that your kernel doesn't like ainur narsil mod (similar with Franken kernel). Phone gets unresponsive with ainur mod. When i deactivate the mod and restart the phone its working fine. Just for info.
Click to expand...
Click to collapse
Are you able to pull a logcat or dmesg of the behavior? If so please send it and I'll look and see what I find.
RogerF81 said:
How well does bbr work in comparison to, let's say westwood?
Click to expand...
Click to collapse
Data I've seen seems to suggest BBR is more efficient. I like BBR personally from my own usage.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Out of alpha and into beta!
beta #1.00
https://www.androidfilehost.com/?fid=4349826312261704276
beta #1.00 changelog:
- Out of alpha and into beta!
- Hacks reverted - building properly now thanks to help from @Freak07
- Enabled lld
- Enabled LTO and CFI
Donations: https://paypal.me/wrongway213
Flash and enjoy!
beta #1.01
https://www.androidfilehost.com/?fid=4349826312261705634
beta #1.01 changelog:
- Upstreamed to latest 4.14.166
- kernel: Use the stock coral config for /proc/config.gz: Spoof kernel config to userspace to avoid error messages
- Touchboost reverted
- Some logging removed
- GCC 9.2 warnings fixed
Donations: https://paypal.me/wrongway213
Flash and enjoy!
beta #1.02
https://sourceforge.net/projects/fsociety-kernel/files/fsociety.beta#1.02.zip/download
beta #1.02 changelog:
- sched/fair.c: Don't allow SchedTune boosted tasks to be migrated to small cores
- proc: Don't let Google Camera run in the background
- ion: system_heap: Fix uninitialized sg-table usage
- devfreq: add use_ab tunnable
- dmaengine: Fix memory leak in dma_async_device_register
- media: v4l2-ioctl: Use a larger on-stack video copy buffer
- sched/swait: Switch to full exclusive mode
Donations: https://paypal.me/wrongway213
Flash and enjoy!
On an unrelated note - I know I'm very active on Telegram, but it sure is quiet in here. How's the kernel running for you guys? Any issues I should know about? Any feedback - good or bad - is always appreciated :good:
I'm running alpha 1.01 or what ever you called it. Your second release. On the benzo ROM. Workin great here
I am on Dirty Unicorns RC and I am going to give this a go. Will report back.
Sent from my Pixel 4 XL using Tapatalk
wrongway213 said:
beta #1.02
https://sourceforge.net/projects/fsociety-kernel/files/fsociety.beta#1.02.zip/download
beta #1.02 changelog:
- sched/fair.c: Don't allow SchedTune boosted tasks to be migrated to small cores
- proc: Don't let Google Camera run in the background
- ion: system_heap: Fix uninitialized sg-table usage
- devfreq: add use_ab tunnable
- dmaengine: Fix memory leak in dma_async_device_register
- media: v4l2-ioctl: Use a larger on-stack video copy buffer
- sched/swait: Switch to full exclusive mode
Donations: https://paypal.me/wrongway213
Flash and enjoy!
On an unrelated note - I know I'm very active on Telegram, but it sure is quiet in here. How's the kernel running for you guys? Any issues I should know about? Any feedback - good or bad - is always appreciated :good:
Click to expand...
Click to collapse
I can't seem to get the telegram link in the first post to bring me to the group??
kirschdog1 said:
I can't seem to get the telegram link in the first post to bring me to the group??
Click to expand...
Click to collapse
I just checked the link and it's still working..