Related
No one have tried the new ROM Copperhead OS ?
Can i try to install it as secondary rom in MultiRom ?
I'm on Cyanogen CAF 12.1 now...
thank you all
chickygamon said:
No one have tried the new ROM Copperhead OS ?
Can i try to install it as secondary rom in MultiRom ?
I'm on Cyanogen CAF 12.1 now...
thank you all
Click to expand...
Click to collapse
Hi! I've installed it in multirom with a stock 5.0.1 as primary and it works, just tried it for few minutes.
just be sure to have the latest bootolader (HHZ12h) or installation will fail.
Flashing a bootloader
Hi,
I have a Nexus 5 and I use Multirom with it. My default ROM is Lollipop 5.1.1 and a secondary ROM, which I mostly use, is Marshmallow 6.0 (xTraSmooth). I want to install CopperheadOS, but it says when installing, that I must have HHZ12h bootloader in order to install (as stated in a previous post). My current bootloader is HHZ11k. If I install HHZ12h bootloader by flashing a zip file which includes LMY48B_Radio+Bootloader-HHZ12h will it cause anything that prevents Lollipop or Marshmallow to work properly?
ithippi said:
Hi,
I have a Nexus 5 and I use Multirom with it. My default ROM is Lollipop 5.1.1 and a secondary ROM, which I mostly use, is Marshmallow 6.0 (xTraSmooth). I want to install CopperheadOS, but it says when installing, that I must have HHZ12h bootloader in order to install (as stated in a previous post). My current bootloader is HHZ11k. If I install HHZ12h bootloader by flashing a zip file which includes LMY48B_Radio+Bootloader-HHZ12h will it cause anything that prevents Lollipop or Marshmallow to work properly?
Click to expand...
Click to collapse
You don't need to downgrade the bootloader, just modify the updater script of the rom ( deleting the string containing the bootloader version or replacing with your current version), then it will install just fine.
Can anybody provide link on COPPERHEAD OS ? CHEERS!
Pretoriano80 said:
You don't need to downgrade the bootloader, just modify the updater script of the rom ( deleting the string containing the bootloader version or replacing with your current version), then it will install just fine.
Click to expand...
Click to collapse
Thanks! I haven't tried that yet, but I will. First I thought I can just replace HHZ12h with HHZ11k using text editor, but then I noticed there are guides which suggest that it isn't quite that easy. I might be wrong about that, will see when I have enough time to read up on the subject.
Sent from my Nexus 5 using XDA Free mobile app
ithippi said:
Thanks! I haven't tried that yet, but I will. First I thought I can just replace HHZ12h with HHZ11k using text editor, but then I noticed there are guides which suggest that it isn't quite that easy. I might be wrong about that, will see when I have enough time to read up on the subject.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
It's easy, just extract the rom, go to Meta-Inf/com/google/android and modify the "updater-script". That's all, rebuild the zip and flash in recovery.
Edit: you can do it without using a PC, by using a file manager on your device.
Ross Korolov said:
Can anybody provide link on COPPERHEAD OS ? CHEERS!
Click to expand...
Click to collapse
here it is
https://copperhead.co/android/
....
Is this rom any good?
bonedriven said:
Is this rom any good?
Click to expand...
Click to collapse
Just installed it on a Nexus 5x and it works flawless. It has most of the standard stuff but is different from the rest in that it is supposed to be security oriented. That means no default root (but rooting should be possible).
I didn't try to add Google stuff yet and probably won't even try to add that spyware but it does have the F-Droid app store.
There are some extra options to secure the memory if required, and the documentation is (so far) very good (for example the install guide and the technical overview).
Currently running it on my Nexus 5x and N5. works great. Anything you are missing you can find on F-Droid. I find the lack of data usage to be delightful; when facebook or ebaum videos auto load on other software, they are stopped on copperhead. very happy with the security.
The only thing i can not make work is voice to text, and I have a ticket in with copperhead. who cares, I have fast thumbs.
Nexus + Copperhead = Happy Gopher!
mg.degroot said:
Just installed it on a Nexus 5x and it works flawless. It has most of the standard stuff but is different from the rest in that it is supposed to be security oriented. That means no default root (but rooting should be possible).
I didn't try to add Google stuff yet and probably won't even try to add that spyware but it does have the F-Droid app store.
There are some extra options to secure the memory if required, and the documentation is (so far) very good (for example the install guide and the technical overview).
Click to expand...
Click to collapse
happy_gopher said:
Currently running it on my Nexus 5x and N5. works great. Anything you are missing you can find on F-Droid. I find the lack of data usage to be delightful; when facebook or ebaum videos auto load on other software, they are stopped on copperhead. very happy with the security.
The only thing i can not make work is voice to text, and I have a ticket in with copperhead. who cares, I have fast thumbs.
Nexus + Copperhead = Happy Gopher!
Click to expand...
Click to collapse
Thanks for the feedback. I guess manual apk installation is also possible?
I'm thinking about picking up a Nexus 5 as a backup device, and CopperheadOS seems like something fun to play with, instead of just installing CM13. Can I install TWRP as recovery on devices like the Nexus 5 that don't check for locked bootloaders? Can I run it as basically another ROM –*unlocked developer options, root, TWRP, etc.? I realize the OS exists for enhanced security, but I'd like to make a few tradeoffs.
Unfortunately, you can not run TWRP with copperhead, it wants full control of the phone for security reasons. Its not meant to be a developer OS with access to all the bits, so you kind of need to want a OS in a box that you can deal with.
But I have to say, despite its shortcomings of not having google services, it works pretty much flawless on my 5 and 5x. i miss google maps app, but it works 100% via chromium browser as a favorite, and I have only found 2 apps I can not import via apkmirror, one being Waze, the other is my local public transportation app. other than that, i feel like I'm safe from prying eyes.
Hg
happy_gopher said:
Unfortunately, you can not run TWRP with copperhead, it wants full control of the phone for security reasons. Its not meant to be a developer OS with access to all the bits, so you kind of need to want a OS in a box that you can deal with.
But I have to say, despite its shortcomings of not having google services, it works pretty much flawless on my 5 and 5x. i miss google maps app, but it works 100% via chromium browser as a favorite, and I have only found 2 apps I can not import via apkmirror, one being Waze, the other is my local public transportation app. other than that, i feel like I'm safe from prying eyes.
Hg
Click to expand...
Click to collapse
Thanks for your response. I'm a fan of CyanogenMod, and I'm not unhappy their security or features, but I wanted to play around with CopperheadOS. I understand the tradeoff between security and convenience, but I'm not willing to sacrifice TWRP in the mix. Oh, well – if I ever have need of an OS solely for its security track record, I know where to go.
It doesn't look to me like Copperhead is supporting the Nexus 5 anymore. Can somebody confirm or is there a link I'm missing somewhere to the ROM?
EDIT: Yep, I knew it was deprecated for a while now but they've even removed the deprecated ROM from the site now. I'd appreciate it if anybody has the last ROM if they could pass it my way.
NewDayRising said:
Thanks for your response. I'm a fan of CyanogenMod, and I'm not unhappy their security or features, but I wanted to play around with CopperheadOS. I understand the tradeoff between security and convenience, but I'm not willing to sacrifice TWRP in the mix. Oh, well – if I ever have need of an OS solely for its security track record, I know where to go.
Click to expand...
Click to collapse
Switch debugging OFF and don't lock bootloader after CopperheadOS install and u will be able to boot TWRP via
fastboot boot recovery.img [TWRP]
I'm currently experimenting with root privileges on CopperheadOS on Nexus 5X. Still haven’t tried xposed framework.
Security features r quite good, especially different lock code && encryption password and memory protection, but, there is a lack of fine privacy control (Privacy Guard) as in CyanogenMod and firewall, hence the need for root.
CopperheadOS on Nexus5
dnaod said:
It doesn't look to me like Copperhead is supporting the Nexus 5 anymore. Can somebody confirm or is there a link I'm missing somewhere to the ROM?
EDIT: Yep, I knew it was deprecated for a while now but they've even removed the deprecated ROM from the site now. I'd appreciate it if anybody has the last ROM if they could pass it my way.
Click to expand...
Click to collapse
I've been using CopperheadOS for a few weeks now on the Nexus5. Received the latests OTA a few days ago and applied without issue.
Installed it via TWRP. Have rooted the device with SuperSU, though have to re-root after re-flashing recovery after each OTA.
It's been working great.
Unfortunately I don't have the img any more
The one I flashed was https://builds.copperhead.co/builds/hammerhead-factory-2016.08.09.06.24.33.tar.xz
download link
dnaod said:
It doesn't look to me like Copperhead is supporting the Nexus 5 anymore. Can somebody confirm or is there a link I'm missing somewhere to the ROM?
EDIT: Yep, I knew it was deprecated for a while now but they've even removed the deprecated ROM from the site now. I'd appreciate it if anybody has the last ROM if they could pass it my way.
Click to expand...
Click to collapse
https:// builds.copperhead.co /builds/hammerhead-factory-2016.09.07.19.27.04.tar.xz
Remove spaces. I'm a new member and can't post links.
Since well functioning encryption seems to be a rarity these days, I decided to make a list for everyone interested in protecting their device. Majority of roms out there seem to have issues with it for some reason. Feel free to add in the comment section if you have tested other roms.
With "fully" working I mean that you can also mount /data with latest twrp (for e.g. omni currently fails in this regard). And please note that I mostly have tested the roms with everything EXT4.
FULLY WORKING
1. LinOs, tested 13.2. build
2. Slim7, tested 24.2. build
3. RR, tested 2.2. build
4. Tesla, tested 25.2. build
5. Validus, tested 25.2. build
CURRENTLY NOT WORKING
1. OmniRom
2. Nitrogen, tested 1.3. build
3. AOSP Extended
4. AOSPlusone
5. Android Open Source Project
list updated 6.3.2017
Any others? Please feel free to correct me if I'm wrong or if you have noticed that situation has changed.
I tried a fresh installation and encryption of RR onto my OPO and it wasn't a success; always responds that encryption was unsuccessful and had to end up wiping and re-installing. Can I ask what RR 7.11 release you were using so I can give that a try?
tofu said:
Since well functioning encryption seems to be a rarity these days, I decided to make a list for everyone interested in protecting their device. Majority of roms out there seem to have issues with it for some reason. Feel free to add in the comment section if you have tested other roms.
Currently, after testing Nitrogen, omnirom, AOSP extended, AOSPlusone, Android Open Source Project, LinOs, Slim7, RR 7.1.1, only the latter three have encryption working:
1. LinOs
2. Slim7
3. RR
Any others?
Click to expand...
Click to collapse
Deangus said:
I tried a fresh installation and encryption of RR onto my OPO and it wasn't a success; always responds that encryption was unsuccessful and had to end up wiping and re-installing. Can I ask what RR 7.11 release you were using so I can give that a try?
Click to expand...
Click to collapse
I found this (my old post): https://forum.xda-developers.com/showpost.php?p=70891641&postcount=3236
So if you find a build dated 5.2.2017 or earlier, it should work. At least mine did back then
But remember to format everything EXT4.
Preliminary operations/infos
First of all: what's Treble?
Find it out here.
How do I obtain my bootloader unlock code?
GO HERE, FAST!
Huawei officially ceased the unlocking service.
How do I get Treble on my device?
At the moment of this write down, EMUI it's still in private BETA.
The only chance to obtain it it's to follow this guide CAREFULLY.
What if I want to revert to EMUI 8/5?
Follow the steps described in the guide to get treble on your device using EMUI 8 files if you want to revert to EMUI 8, or EMUI 5 if you wish to revert to it.
The road it's long...
So, you're sitting there, not understanding why there are so much ROMs in this section and why you shouldn't use the ones appearing in Treble-Enabled Device Development since you worked so hard to get Treble on it.
Let's try to answer a universal question.
What's the difference from the "standard" GSIs and the ROMs in this section?
Well, the ROMs here were made keeping an eye on the "optimization per-platform" concept, basically tracking down some proprietary stuff inheriting them under /system .
**WHAT FOLLOWS ARE PERSONAL OPINIONS**
I honestly think, that we should cut off this approach.
Inheriting stuff under /system has no more sense.
Am I saying that what I did till now had no sense?
Yes.
The whole Treble concept relies on moving away from system, any vendor related stuff.
So why in the hell should we inherit proprietary stuff in our system partition again?
When we have other ways to don't mess with it?
The only stuff that still "deserves" to have something to do with /system it's the Huawei Camera.
Everything else, belongs to /vendor.
Furthermore, our goal, as developers and users, should be to track down specific-platform bugs and report them.
Co-operation is the sake of open-source and the key to success in a wonderful GSI experience for everyone.
Is my device ready to use a "standard" GSI?
Pretty much.
Huawei doesn't ship any overlay under /vendor in our PRA, because it's inherited in EMUI under /system.
But, you can follow this guide, to include the needed overlay to be fully GSI-ready.
Also, you need this thread too to fix offline charging on your Huawei device.
Known Bugs on GSI and "specific-GSI"
NFC has been an annoying issue all along the development process on some Huawei devices.
But this flashable zip, seems to solve the issue on our PRA.
Indeed it needs more testing.
Available tools/software for your PRA
ADB and Fastboot
TWRP
MindTheGapps
Huawei Camera Magisk
OEMInfo (TWRP backup)
HuRU
Stock Ramdisk (ramdisk partition)
Stock Recovery (recovery_ramdisk partition)
Specific-GSI available
Lineage OS https://forum.xda-developers.com/p8...t/rom-lineage-os-huawei-p8-lite-2017-t3787193
CrDroidhttps://forum.xda-developers.com/p8.../rom-crdroid-4-2-huawei-p8-lite-2017-t3785615
AospExtendedhttps://forum.xda-developers.com/p8.../rom-aospextended-5-4-huawei-p8-lite-t3778938
AOSPhttps://forum.xda-developers.com/p8...ent/rom-aosp-r23-huawei-p8-lite-2017-t3779115
Resurrection Remix 6https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-rros-pra-t3774444
SlimRom 8
AICP
Specific GSIs are now discontinued.
Go to the Treble Enabled Development sub to get some ROMs to flash!
NOTE:
This ROMs will be discontinued in a couple of weeks, since the installation of the overlay (previously highlighted in the paragraph "Is my device ready to use a "standard" GSI?") will give access to a full fledged GSI experience without the need of specific GSIs.
Custom kernels
Labyrinth
Disable encryption to use Adoptable Storage (or just because you can)
open /vendor/etc/fstab.hi6250
make a backup just in case
find "/dev/block/bootdevice/by-name/userdata /data f2fs nosuid,nodev,noatime,discard,inlinedata,inlinexattr wait,check,fileencryption=aes-256-xts:aes-256-cts"
remove ",fileencryption=aes-256-xts:aes-256-cts"
factory reset via stock recovery
If this isn't clear enough, please, check this contribution.
Playstore download pending fix
Access https://play.google.com/apps/testing/com.google.android.gms/join
Apply for the beta
Update Google Play Services to the beta
Profit
Magisk keeps crashing?
Turn off its "Check for update feature" and praise for the arrival of a new Magisk version.
From 16.6 version, Magisk it's fully working.
Please, refer to this thread for a correct installation.
How to report bugs
Boot problems:
Please do dump /splash2 partition and sys/fs/pstore content via adb pull in my TWRP.
adb logcat > file.txt
Quirks on booted system:
Please take a full bugreport when the bugs happens via Developer Options
or
adb logcat > file.txt
send file.txt to the developer
Hey you!
If you're reading this message I want you to help this community.
Share your thoughts about this posts or post your un-answered questions below.
The more we share, the best experience we'll get.
Also, please respect my work.
If you do integrate some of this infos in your thread/website or whatever, add me in the credits.
Furthermore, feel free to join us at @GSI_HI6250 on Telegram, we're funny people, I swear.
Is this non-clear somehow?
Or you just need help?
Fill the help form below.
Device Variant:
Device Firmware:
Is your device rebranded?:
How frequently this issue happens?
Is this happening now?
Describe the issue:
Describe steps to reproduce the issue:
Attach logcats/full bugreports as described on the paragraph "How to report bugs"
Or simply join the telegram group.
Peace.
Dil3mm4 said:
Kaioken reserved
Click to expand...
Click to collapse
Super Saiyan reserved
Lol
Dil3mm4 said:
Disable encryption to use Adoptable Storage (or just because you can)
open /vendor/etc/fstab.hi6250
make a backup just in case
find "/dev/block/bootdevice/by-name/userdata /data f2fs nosuid,nodev,noatime,discard,inlinedata,inlinexattr wait,check,fileencryption=aes-256-xts:aes-256-cts"
remove ",fileencryption=aes-256-xts:aes-256-cts"
factory reset via stock recovery
Playstore download pending fix
Access https://play.google.com/apps/testing/com.google.android.gms/join
Apply for the beta
Update Google Play Services to the beta
Profit
Magisk keeps crashing?
Turn off its "Check for update feature" and praise for the arrival of a new Magisk version.
How to report bugs
Boot problems:
Please do dump /splash2 partition and sys/fs/pstore content via adb pull in my TWRP.
Quirks on booted system:
Please take a full bugreport when the bugs happens via Developer Options
or
adb logcat > file.txt
send file.txt to the developer
Click to expand...
Click to collapse
THAT WORKED. FINALLY 8.1 WITH BOOTLEGGERS GSI, 128GB micro SDXC as INTERNAL. I AM HAPPY
for beginners:
boot after working rom in twrp
go in advanced
go to file manager
go to /vendor/etc/
open file "fstab.hi6250" (after copying with and having a recovery of it, open with notepad++ or something else)
there should be a line with: "/dev/block/bootdevice/by-name/userdata /data f2fs nosuid,nodev,noatime,discard,inlinedata,inlinexattr wait,check,fileencryption=aes-256-xts:aes-256-cts"
erase the part: ",fileencryption=aes-256-xts:aes-256-cts"
save
erase the original fstab.hi6250 file in vendor/etc
and put the new fstab.hi6250 file in
reboot in bootloader
flash stockrecovery.img
reboot recovery
factory reset in stock recovery
reboot
DONE.
now you can see the SD card as internal and use for apps.
Need your help
Hey OP,
Thanks for all your work. Really a big fan.
There is a problem I've noticed on most of the treble roms. After using apps for a while, they begin to FC.
Love your roms and would like to continue using them
Mister746 said:
Hey OP,
Thanks for all your work. Really a big fan.
There is a problem I've noticed on most of the treble roms. After using apps for a while, they begin to FC.
Love your roms and would like to continue using them
Click to expand...
Click to collapse
Updated last post, please submit the infos needed via that form.
Thanks.
Hi, i am experiencing a weird bug on every GSI, specifically, snapchat video recording is fine and smooth, but after tapping on the "send" button it says "failed to add" and doesnt even give a chance to resend the same snap. It happens on all treble roms i've teted so far (i tested every specific GSI for PRA, and some openkirin and otger ones). @dill3m4 do you have any idea how to fix it? I hope there is a way to do a flashable zip or something like the NFC fix. Once i get back home (2-3 days) i will post some logs, in the meantime, can someone please confirm if the issue persists, and gather logs? ?
can i use this method in stock firmware(rooted) because i cant see any fstab file in vendor/etc/
jedtan025 said:
can i use this method in stock firmware(rooted) because i cant see any fstab file in vendor/etc/
Click to expand...
Click to collapse
Just making sure but you are on emui8 right? Also are you checking with a file manager in Android or are you searching in twrp?
neondragon1909 said:
Just making sure but you are on emui8 right? Also are you checking with a file manager in Android or are you searching in twrp?
Click to expand...
Click to collapse
im searching in twrp bro. bro question. im using pra lx2 oreo firmware. and im wanna go back to nougat. it is possible? i got the firmware now but dont know how to flash nougat. dload failed. and i cant use hurupdarer bcos nougat firmware only has 2 zip file
jedtan025 said:
im searching in twrp bro. bro question. im using pra lx2 oreo firmware. and im wanna go back to nougat. it is possible? i got the firmware now but dont know how to flash nougat. dload failed. and i cant use hurupdarer bcos nougat firmware only has 2 zip file
Click to expand...
Click to collapse
I couldn't find the file using TWRP either. Had to use root explorer to find and edit the file. As for hurupdater, I'm not sure if it's the same for your region, but for pra-la1 there were 3 files.
And as for the the 2 files, I successfully flashed using the updater with only the update.zip so try updating anyway. If that doesn't work, use the eRecovery
Update:
Added Magisk news;
Added stock PRA ramdisk
UPDATE:
Added Offline Charging Fix in post #2
Added references to Treble Enabled device development;
New Huawei Magisk Camera;
Hello,
I'm having problems finding the download links in the guide to obtain Treble, I've searched here and clicked on the link to the guide but there i can't find it eather.
cyprian99 said:
Hello,
I'm having problems finding the download links in the guide to obtain Treble, I've searched here and clicked on the link to the guide but there i can't find it eather.
Click to expand...
Click to collapse
Obtain what?
Treble roms?
Yay! Emui 8.0 has arrived on my c432 pra-lx1 (b360) . Everything is perfect.
The guide to get treble is unclear, how can the very first step be to download update.zip? I did and now i have a trojan, thanks a lot
How to unlock bootloader? Now the Huawei site is unavailable
Wysłane z mojego PRA-LX1 przy użyciu Tapatalka
I'm skipping 90% of words here because if you are here I assume you know what you are doing. And you can either Google, use the search button, or ask.
This is a private work of mine, that I use normally on my spare device. Supported as is.
Disclaimer:
Not responsible for any injuries you do to yourself or your device being damaged caused by this ROM.
Known issues:
- Camera not working
INSTRUCTIONS
Clean Flash
Download The ROM & GApps (pick latest one in drive, I use opengapps)
Wipe: System, Data, Dalvik, Cache
Flash ROM + GApps (Opengapps pico)
Reboot & Enjoy
Dirty Flash
Download the ROM
Wipe: Dalvik and Cache
Flash ROM (+Magisk if rooted previously or if want root)
Reboot & Enjoy
Download Folder Link:
https://drive.google.com/open?id=1D0Od55prO_Q_e8RY6QkZ-DjO36Qb188X (Pick Grouper)
Credits to:
Unlegacy Team
Initial Release:
May Security Patch
Can't download the ROM 404 error
JT1510365 said:
Can't download the ROM 404 error
Click to expand...
Click to collapse
https://drive.google.com/open?id=1usLQT6qkg8eUe3FwOvXXHRRaBF8VxR5H
This is the direct link for latest, thanks for trying out! cheers!
KiD3991 said:
https://drive.google.com/open?id=1usLQT6qkg8eUe3FwOvXXHRRaBF8VxR5H
This is the direct link for latest, thanks for trying out! cheers!
Click to expand...
Click to collapse
Which kernel you use?
TureX said:
Which kernel you use?
Click to expand...
Click to collapse
It's stock thus far, but I am testing out other things.
So I assume F2FS can't work, right?
New update:
Direct Link: https://drive.google.com/open?id=1ObhbiIgSwxIS3fDfb2AREEx_6syQSpi_
Consider this pre-June patch build. And no F2FS doesnt work @Stylez Ray. I am too noob to implement it. (For now)
Guys, I apologize but this month's upload will be slightly delayed due to my work and studies having major setbacks. Again, I apologize.
New update:
Direct Link: https://drive.google.com/open?id=1LkbL1TEupSYUY2zA_L_NklEP-j9xWDUP
Changes are minimal in this build other than using a better build machine lol
Thank's good job !!!
All works fine magisk v19.3, dax_axon7_v1.6.1.zip
I return on Andisa rom 7.1.2 freeze and lags horrible
This is really awesome, no more random system freezes like in the first official UA builds. Thanks a lot, it really makes this ancient device useful again ?
@KiD3991 hello, maybe you would like to join Unlegacy team as Tegra 3 developer?
Slightly odd request at this stage probably but is there any chance off an unlegacy lollipop build for grouper? with a 3.4 kernel please?
actually strike that the marshmellow build will be just fine
but does anyone know if shared memory is implemented in a chroot I get -
sysctl -w kernel.shmmax=268435456
returns cannot stat /proc/sys/kernel/shmmax: No such file or directory
New build up, sorry I was really unavailable.
I tried fixing a couple of things, see if it helps, do tell me though, mention me and I will show up.
Direct link: https://drive.google.com/open?id=1g4eu0ulizZ8ZO44hRjMUnIyEYIyWQL9t
Changelog:
Minor bug fixes
July Security Patch
curioct said:
Slightly odd request at this stage probably but is there any chance off an unlegacy lollipop build for grouper? with a 3.4 kernel please?
actually strike that the marshmellow build will be just fine
but does anyone know if shared memory is implemented in a chroot I get -
sysctl -w kernel.shmmax=268435456
returns cannot stat /proc/sys/kernel/shmmax: No such file or directory
Click to expand...
Click to collapse
Interesting for the marshmellow build. Does it have to be UL?
For the bottom one you gotta dig the right directory.
KiD3991 said:
Interesting for the marshmellow build. Does it have to be UL?
For the bottom one you gotta dig the right directory.
Click to expand...
Click to collapse
Hmm I've kind of slipped off this little project for a while I'm trying to use it with the newer kali builds chroot (requiring the 3.4 kernels I believe) in the hope of having a device with WiFi monitor mode available but I was running in to that shared memory issue with services such as postgresql etc think is was causing me issues with csploit too but as I say not really looked at it in a few weeks now.
curioct said:
Hmm I've kind of slipped off this little project for a while I'm trying to use it with the newer kali builds chroot (requiring the 3.4 kernels I believe) in the hope of having a device with WiFi monitor mode available but I was running in to that shared memory issue with services such as postgresql etc think is was causing me issues with csploit too but as I say not really looked at it in a few weeks now.
Click to expand...
Click to collapse
OMG SAME! I was trying with the Kali too on my other device. It was kinda confusing no doubt
This rom is working great, thanks. Please can anyone help me with how to install browser on this rom, as the USB is not working.
did u tried to activate the debug mode , in dev settings? if that doesn't work .. you have to switch the drivers by yourself, in windows ( devices manager ) from ADB Bootloader to Storage Device .. for your Nexus 7
I understand that the TWRP team is apparently still working on an official release for Android 13, but is there even an unofficial build available for the P7Pro? If not, is there a recovery alternative? I really want to be able to do a full system (all partitions) backup of my device. Thanks!
You can create dumps of your partitions using ADB shell in system; TWRP is not required to do this.
Though it wouldn't necessarily be any good for doing full partition backups, I'm currently running the recovery from the StagOS ROM in combination with the stock Pixel ROM. I like it because it allows flashing recovery zips without having to say "Yes" every time due to signature stuff.
A very similar thread with the same topic has been discussed a few days ago - you can check here
Anyone can compile TWRP - it's opensource. Pixel 6+ owners are unlikely to get an official build from TWRP since it requires a volunteer to maintain the repo, deal with bug reports, etc.
It's recommended to simply compile the image on an individual basis (you really don't want to rely on a third-party supplied image when you have no way of knowing whether it's safe or not). Compiling isn't a difficult process, but does require an hour or two of reading TWRP's and Google's applicable developer pages, along with ~30 - 60 minutes of set up time on a PC/laptop (I prefer to compile within an Ubuntu VM, but I believe it can also be done in Windows' WSL).
robroy90 said:
I understand that the TWRP team is apparently still working on an official release for Android 13, but is there even an unofficial build available for the P7Pro? If not, is there a recovery alternative? I really want to be able to do a full system (all partitions) backup of my device. Thanks!
Click to expand...
Click to collapse
They still haven't finished official support for Android 12. Since recovery resources on A12+ are located in vendor_boot, bigbiff is trying to figure out a decent way for TWRP to live there, at least as far as the Pixel 5 is concerned. Not sure what other obstacles may be present on the Pixel 6 series and above.
nooted1 said:
Though it wouldn't necessarily be any good for doing full partition backups, I'm currently running the recovery from the StagOS ROM in combination with the stock Pixel ROM. I like it because it allows flashing recovery zips without having to say "Yes" every time due to signature stuff.
Click to expand...
Click to collapse
Hey thanks for this! How did you flash just the recovery partiton on the Pixel? I am an old hand with Odin on the Samsung devices, but Google official devices are still new to me. Will the StagOS recovery recognize an external USB-C flash drive for storage?
s3axel said:
A very similar thread with the same topic has been discussed a few days ago - you can check here
Click to expand...
Click to collapse
Thank you, I went over there and read everything. Much appreciated!