Database Info

[ROM][GT-P511X][4.2.1]AOSP - Experimental 12/22/2012

Disclaimer: I have no idea if this will run properly, therefore it is considered experimental.
I do not have a p511x and haven't got the balls yet to flash my p311x build on my tablet.​
If you don't have experience recovering from stuff messing up due to badness happening, please don't flash this. I will not be able to help you recover if something goes wrong.
What this is: Straight up AOSP 4.2.1 from source with the Gtab2 p51XX device code from CM10.1. This is as vanilla Android as you'll get if it boots. The zip was made using the regular otapackage method with some modifications to the makefile to allow for extra device asserts and removal of the install-recovery.sh script. I couldn't get the CM zip stuff (squisher) working with the vanilla AOSP build structure.
The su executable is included in /xbin, but I have no idea if root actually works. I do know that busybox is nowhere in the zip. You'll have to install ChainFires' SuperSu from the Play Store to see if you can do all the cool stuff that root lets you.
Downloads:
p5100: Don't have a build yet, my build system sucks and takes 4.5 hours to do a clean build. Please don't ask for an ETA, I'll be out of town for a while without access to the build system.
p5110: http://www.mediafire.com/?48w04zlx3xa9ukr md5: a12208f385abcd3ac0d24faee77d76bf
p5113: use p5110
Issues:
I have no idea
Google Apps can be found here, I would assume you'd need to pick the latest one for CM10.1.
Installation:
Ensure you're running the latest ClockworkMod Recovery
Copy zip of ROM and GAPPs to your SD Card
Reboot to Recovery
Flash ROM
Flash GAPPs
Perform a Factory Reset
Reboot
Cross your fingers and hope it boots...
Follow CM10.1's install procedure after the reboot here
Recommendations:
None at this time
Credits:
codeworkx and teamhacksung for their work on CM10.1
frankdrey for his initial testing of not totally working ota zip packages
Screenshot:
Don't have any...

Stealing this one just in case.

Thank for your effort itest it and i see you later if work or not work
Envoyé depuis mon GT-P5110 avec Tapatalk
---------- Post added at 12:35 PM ---------- Previous post was at 12:11 PM ----------
ok i test it and i stay on startup logo dont boot

coelho_ said:
Thank for your effort itest it and i see you later if work or not work
Envoyé depuis mon GT-P5110 avec Tapatalk
---------- Post added at 12:35 PM ---------- Previous post was at 12:11 PM ----------
ok i test it and i stay on startup logo dont boot
Click to expand...
Click to collapse
Thanks for the info, did you by chance have it hooked up to adb when it was attempting to boot?

Not booting
Same problem here as well, It hangs at the boot logo. I've also noticed something intresting when I flashed it in CWM, When I flash it, it says "Warning: No file_context" weird huh?

I think I shall give this a shot again
Sent from my GT-P5110 using xda app-developers app

[RECOVERY][TF101][TF101G][SL101] TWRP 2.8.1.1 Unofficial [2014-11-06]

Team Win Recovery Project 2.8, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
For official change logs, see here:
http://teamw.in/project/twrp2
For recent code merges, see the Omnirom gerrit here:
https://gerrit.omnirom.org/#/q/proje...+status:merged
______________________________________
Download flashable TWRP 2.8.1.1 zip for TF101:
signed_twrp-2.8.1.1_tf101.zip
TWRP 2.8.1.1 MD5 sum for TF101:
signed_twrp-2.8.1.1_tf101.zip.md5
______________________________________
Download flashable TWRP-2.8.1.1 zip for TF101G:
signed_twrp-2.8.1.1_tf101g.zip
TWRP-2.8.1.1 MD5 sum for TF101G:
signed_twrp-2.8.1.1_tf101g.zip.md5
______________________________________
Download flashable TWRP 2.8.1.1 zip for SL101 Slider:
signed_twrp-2.8.1.1_sl101.zip
TWRP 2.8.1.1 MD5 sum for SL101 Slider:
signed_twrp-2.8.1.1_sl101.zip.md5
____________________________________
If experiencing any boot loops or you don't see the blue-green flash progress bar after you thought you just flashed a recovery, then try the suggestions from this post:
http://forum.xda-developers.com/showpost.php?p=46806749&postcount=187
concerning dd methods to clear a stuck flag and maybe flash a recovery blob if other methods aren't working for you, particularly if you attempted to use ROM Manager or certain versions of CWM or other programs to flash this recovery.
____________________________________
Credits:
Team Win Recovery Project
josteink for tf101 device tree
timduru for tf101 device tree
josteink for tf101 kernel source
OmniROM for Android 4.4.2 base
Google for Android AOSP
Anyone else who previously contributed to this.
In particular, many thanks to josteink who encouraged this and provided much useful information to get it going.
For more information:
http://teamw.in/project/twrp2

TWRP Screenshots
Latest screen shots from TWRP:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

TWRP Custom Themes [10-10-2013]
I will use this post to post links to custom TWRP themes, both my own and any that users would like to provide me the links to in a PM. This first one is my first attempt at TWRP theming and is just a pretty basic, modified stock theme. It is based on the stock theme for 1280x800 devices. I know everyone won't like it, but it is my first stab at it. Have fun and if anyone would like some instructions for creating a custom theme, then hit me up with a PM and I'll try to help. It is not really difficult, just time consuming and tedious work. There are also links to guides on the twrp site for theming.
Instructions:
Just download, reboot to recovery (you are running TWRP recovery?), flash the theme zip file, reboot, and reboot to recovery again to see the results.
[EDIT] Here's a second one for you:
sidneyk-theme2.zip download link:
https://dl.dropboxusercontent.com/u/47619656/sidneyk-theme2.zip
sidneyk-theme2.zip.md5 download link:
https://dl.dropboxusercontent.com/u/47619656/sidneyk-theme2.zip.md5
[EDIT] Here are some screenshots taken with my camera, as I don't know any other way to get them right now:
##########################
sidneyk TWRP custom theme zip download:
https://dl.dropboxusercontent.com/u/47619656/sidneyk-theme.zip
sidneyk-theme MD5 sum:
https://dl.dropboxusercontent.com/u/47619656/sidneyk-theme.zip.md5

Reserved #3

Awesome thanks a lot. I was wondering if you can do titanium custom zips with twrp? It seems i was not able to previously. Like flashing a user app or titanium itself?

Installed perfect!! Now waiting for KatKiss 4.3 v021
Thx for continuing to keep our beloved tf alive!!
Sent from my Transformer TF101 using XDA Premium 4 mobile app

YayYouFixedIt said:
Awesome thanks a lot. I was wondering if you can do titanium custom zips with twrp? It seems i was not able to previously. Like flashing a user app or titanium itself?
Click to expand...
Click to collapse
I never had much luck with titanium zips myself. I'll have to give it a try sometime.
Sent from my SAMSUNG-SGH-T769 using XDA Premium HD app

Thanks for taking this over man! Flashed it and it works perfeclty. Did a backup, full wipe, restore and it had no issues.

Is there anyway to have this app recognize the USB port (with a thumb drive) that's built into the keyboard attachment ?

Good jeez I need a third job just for donations! This is outstanding work man. Made a backup all good last night, and installing, wiping, fix perms seems work all fine for me as well. Thank you so very much for continue support in this awesome tab
~S-Off LTEvo; Back on the Always Solid Viper4G Latest; Expletive Deleted Kernel
cpu0/1: 1.5ghz ¦ 384mhz ¦ sleep: 486mhz max
Ondemand
fiops
thermald: dynamic
With tapatalk4

Hey all,
I've got a small problem with this version of TWRP 2.6.1.0 that was not present in any of the previous version I've used. The problem is each time I use this version no matter what function is preformed (all works fine) when it comes to restart the system I am presented with the following screen:
*********************************************
*********************************************
Fix Superuser Permissions?
Root permissions appear to be lost.
Fix root permissions now?
(Fixes permissions on su binary & app)
<Do Not Fix>
>> Swipe to fix Root >>
*********************************************
*********************************************​
I've have cleaned SurerSU on system and reinstalled it with no errors, but did not work.
I've downgraded to 2.6.0.0 but still not worked.
I've restored from a working Nandroid Backup but no joy (TWRP 2.5.0.0) and no more permission screens.
Any idea what is going on???

worf105 said:
Hey all,
I've got a small problem with this version of TWRP 2.6.1.0 that was not present in any of the previous version I've used. The problem is each time I use this version no matter what function is preformed (all works fine) when it comes to restart the system I am presented with the following screen:
*********************************************
*********************************************
Fix Superuser Permissions?
Root permissions appear to be lost.
Fix root permissions now?
(Fixes permissions on su binary & app)
<Do Not Fix>
>> Swipe to fix Root >>
*********************************************
*********************************************​
I've have cleaned SurerSU on system and reinstalled it with no errors, but did not work.
I've downgraded to 2.6.0.0 but still not worked.
I've restored from a working Nandroid Backup but no joy (TWRP 2.5.0.0) and no more permission screens.
Any idea what is going on???
Click to expand...
Click to collapse
I've only ever seen anything about reinstalling supersu after I've formatted data ( and factory reset ) and am getting ready to reboot, as suggested, because, of course, I've just wiped it out and have no OS or anything installed. I've said yes and I've said no, without any issues either way, but that was previous versions and not this particular one. Maybe your root really was messed up? There was supposedly an updated supersu included in this version or 1 back I believe according to the change logs.

the.teejster said:
Is there anyway to have this app recognize the USB port (with a thumb drive) that's built into the keyboard attachment ?
Click to expand...
Click to collapse
Did it work with any previous versions? I've not made any changes that would affect that functionality one way or the other, so if it worked before it should work now, if it didn't then it probably still won't.

sidneyk said:
I've only ever seen anything about reinstalling supersu after I've formatted data ( and factory reset ) and am getting ready to reboot, as suggested, because, of course, I've just wiped it out and have no OS or anything installed. I've said yes and I've said no, without any issues either way, but that was previous versions and not this particular one. Maybe your root really was messed up? There was supposedly an updated supersu included in this version or 1 back I believe according to the change logs.
Click to expand...
Click to collapse
Thanks sidneyk :good:
My root still functions flawlessly when using my TF101 no matter if I select Yes fix or No to the fix at reboot system. I now have restore the nandroid back up for earlier today as I have loads of changes that are not on my later backup. Now to look where ive found the download link to twrp2.5-tf101-unofficial.beta which works flawlessly
Cheers
worf105

worf105 said:
Thanks sidneyk :good:
My root still functions flawlessly when using my TF101 no matter if I select Yes fix or No to the fix at reboot system. I now have restore the nandroid back up for earlier today as I have loads of changes that are not on my later backup. Now to look where ive found the download link to twrp2.5-tf101-unofficial.beta which works flawlessly
Cheers
worf105
Click to expand...
Click to collapse
Sorry you had a bad experience with it. Did you also download the md5 file to verify a good download?

worf105 said:
Thanks sidneyk :good:
My root still functions flawlessly when using my TF101 no matter if I select Yes fix or No to the fix at reboot system. I now have restore the nandroid back up for earlier today as I have loads of changes that are not on my later backup. Now to look where ive found the download link to twrp2.5-tf101-unofficial.beta which works flawlessly
Cheers
worf105
Click to expand...
Click to collapse
2.5.0.0 download is in the 2.6.0.0 (joesteink's) thread.

frederuco said:
2.5.0.0 download is in the 2.6.0.0 (joesteink's) thread.
Click to expand...
Click to collapse
Thanks, found it :good:
---------- Post added at 01:31 PM ---------- Previous post was at 01:10 PM ----------
sidneyk said:
Sorry you had a bad experience with it. Did you also download the md5 file to verify a good download?
Click to expand...
Click to collapse
Now even 2.5.0.0 is doing the same.
I have now since done the following:
Wiped Cache, Dalvik cache and System,
Flashed KatKiss 4.3 r2.2 #20 ROM'
Flashed Gapps,
Flashed KatKernel 107b,
Flashed TWRP 2.6.1.0,
Wiped Cache & Dalvik Cache
Rebooted with no fix root permission screen,
Rebooted in to recovery, (2.6.1.0)
Deleted older Nandroid Backups,
Created new Nandroid Backup,
when finished creating new backup I am now presented with the fix superuser permission screen,
Swiped to fix superuser,
Reboots and root works fine, (opened up SuperSU v1.60 and no error or updates to binary required, Opened Root Checker Basic v5.0.6 by Joes Krim and verified root access with no errors.)
Rebooted into recover again,
Fixed Permission's (Successful)
selected Reboot button and still taking to the Fix Superuser Permission screen again so Swiped to Fix and TF101 reboots with no screen output,
Again check if root is OK on system, which it is,
Reboot to Recovery again and when in recovery I select reboot then system,
Presented with the Fix Superuser Premission screen again so I select Do Not Fix,
Reboot to system to verify Root which is OK,
Reboot into Recovery for the last time and selected reboot then system which brings up the Fix Superuser screen again,
Swiped to fix, system reboots OK and user (me) gives up
Any Ideas

worf105 said:
Thanks, found it :good:
---------- Post added at 01:31 PM ---------- Previous post was at 01:10 PM ----------
Now even 2.5.0.0 is doing the same.
I have now since done the following:
Wiped Cache, Dalvik cache and System,
Flashed KatKiss 4.3 r2.2 #20 ROM'
Flashed Gapps,
Flashed KatKernel 107b,
Flashed TWRP 2.6.1.0,
Wiped Cache & Dalvik Cache
Rebooted with no fix root permission screen,
Rebooted in to recovery, (2.6.1.0)
Deleted older Nandroid Backups,
Created new Nandroid Backup,
when finished creating new backup I am now presented with the fix superuser permission screen,
Swiped to fix superuser,
Reboots and root works fine, (opened up SuperSU v1.60 and no error or updates to binary required, Opened Root Checker Basic v5.0.6 by Joes Krim and verified root access with no errors.)
Rebooted into recover again,
Fixed Permission's (Successful)
selected Reboot button and still taking to the Fix Superuser Permission screen again so Swiped to Fix and TF101 reboots with no screen output,
Again check if root is OK on system, which it is,
Reboot to Recovery again and when in recovery I select reboot then system,
Presented with the Fix Superuser Premission screen again so I select Do Not Fix,
Reboot to system to verify Root which is OK,
Reboot into Recovery for the last time and selected reboot then system which brings up the Fix Superuser screen again,
Swiped to fix, system reboots OK and user (me) gives up
Any Ideas
Click to expand...
Click to collapse
You can't flash TWRP together with a ROM as flashing TWRP will overwrite the staging partition and the ROM's kernel will then not get flashed. So first flash your ROM, gapps and katkernel, then reboot into your rom, then reboot into recovery to flash TWRP, then reboot again.

sidneyk said:
Did it work with any previous versions? I've not made any changes that would affect that functionality one way or the other, so if it worked before it should work now, if it didn't then it probably still won't.
Click to expand...
Click to collapse
Ye it work great when running 2.5.0.0, no errors
worf105
---------- Post added at 01:49 PM ---------- Previous post was at 01:47 PM ----------
jrohwer said:
You can't flash TWRP together with a ROM as flashing TWRP will overwrite the staging partition and the ROM's kernel will then not get flashed. So first flash your ROM, gapps and katkernel, then reboot into your rom, then reboot into recovery to flash TWRP, then reboot again.
Click to expand...
Click to collapse
Ok Thanks will flash on that order and remember it in future, will get back to you as I've done it with results. :good:
cheers
worf105
---------- Post added at 02:18 PM ---------- Previous post was at 01:49 PM ----------
worf105 said:
Ye it work great when running 2.5.0.0, no errors
worf105
---------- Post added at 01:49 PM ---------- Previous post was at 01:47 PM ----------
Ok Thanks will flash on that order and remember it in future, will get back to you as I've done it with results. :good:
cheers
worf105
Click to expand...
Click to collapse
Done what you said but no joy. When I swipe to fix superuser it reboots that quickly it looks as if it doesn't have time to fix the problem before it reboots

sidneyk said:
Did it work with any previous versions? I've not made any changes that would affect that functionality one way or the other, so if it worked before it should work now, if it didn't then it probably still won't.
Click to expand...
Click to collapse
it didnt work before.

[ROM] OFFICIAL CM12.1 KFire HD 7 (LP 5.1.x) [2015-06-24 ALPHA]

OFFICIAL CyanogenMod 12.1 for the Kindle Fire HD 7"
*** USE AT YOUR OWN RISK! WHILE I TRY MY BEST TO PROVIDE WORKING KERNELS/ROMS, I AM NOT RESPONSIBLE IF THIS SOFTWARE OR ANYTHING I'VE WORKED ON SUDDENLY FRIES YOUR DEVICE. ***
BEFORE YOU FLASH THIS, PLEASE MAKE SURE THAT YOU HAVE A 2ND-BOOTLOADER INSTALLED FROM HERE:
http://forum.xda-developers.com/showthread.php?t=2128848
CHECK KNOWN ISSUES BEFORE FLASHING. MAY NOT BE GOOD ENOUGH FOR DAILY USE.
Official nightly builds can be found here:
http://download.cyanogenmod.org/?device=tate
Download Google Apps for Android 5.1:
https://www.androidfilehost.com/?w=files&flid=25361
(Choose newest *-5.1-* file)
NOTES:
Older versions of TWRP will show a "mount failed error". This is safe to ignore.
First boot after a clean wipe will take a LONG time. Be patient.
KNOWN ISSUES:
Use XDA Bug Reporter
SCREEN SHOTS:
Use XDA Screenshots
XDA:DevDB Information
CM12.1 KFire HD 7 (LP 5.1.x), ROM for the Amazon 7" Kindle Fire HD
Contributors
Hashcode
Source Code: http://www.github.com/CyanogenMod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Alpha
Beta Release Date: 2015-06-24
Created 2014-12-27
Last Updated 2015-06-24

Reserved
KERNEL UPDATES for Lollipop Android 5.0 / 5.1
Added F2FS support which can be turned on (with a full /data format) in a future release of TWRP
Combined defconfig setup to better support all HD models
Picked "Wakeup reason" patchset from Google's common 3.4 kernel (not fully implemented yet)
Picked IPV6 routing changes from Google's common 3.4 kernel
Reverted a hardcoded disable of Secure Discard and added the official upstream patch for Secure Discard support detection

Reserved
Android 5.1 / CM-12.1 changes:
SElinux Enforcing as default enabled

Woke up from my nap and saw this! Amazing!!! Downloading now
Edit: I would like to point out that there will be a mount failed error in TWRP when flashing the build. Ignore the error and be patient. It'll flash! It took about 2-3 minutes.
Edit2: And it has booted! Approx time is 8 minutes. Be patient on your first boot guys!

Very very thanks Hashcode you are awesome!

Always knew we could rely on the master. Flashing asap once downloaded.

Hashcode, I flash it and 5Ghz Wifi works for me

davigar said:
Hashcode, I flash it and 5Ghz Wifi works for me
Click to expand...
Click to collapse
Mines not. It's not detecting my 5Ghz network.

Can confirm the 7/8 minute 1st boot. Must be to do with initialising ART?!
Anyway, now for a play and a few customisations.
Once again, Thank you and hope you managed to find some time to enjoy Christmas!!

I just got 5Ghz to work. At least on mine. So since a lot of my android devices don't detect my 5Ghz I had to do some researching. Changing the 5Ghz channel from Automatic/Auto to 44 or 48 will make it work. Can confirm on my Nexus 4 and the Kindle. Works superbly!
Source

Glad to see you sorted out all of the issues quicker than any of the other developers could. We're not horrible, but there's no matching the talent that you have when it comes to this type of thing.

And we thought we were close ?. At least we learned a lot and more to come! Thanks Hash for putting your time and effort into this.

How to fix allot of FC's? Google play is giving me trouble. I flashed 12/20 gapps right? And su 1.94

Everything seems to be working very nicely so far. Just flashed about an hour ago. Seems much smoother than kit kat did. Thank you very much. Looking forward to the updates.
Sent from my Amazon Tate

cell2011 said:
How to fix allot of FC's? Google play is giving me trouble. I flashed 12/20 gapps right? And su 1.94
Click to expand...
Click to collapse
As the title of thread says, its in Alpha. But may I ask what FC's your'e getting? I'm running the build on my Kindle at the moment and the only FC I get is Bluetooth Sharing. Bluetooth was activated on the main user and when I switch to another user it FC's.

I did advance wipe cache system dalvik data and flashed rom gapps and super su 1.94
---------- Post added at 10:10 PM ---------- Previous post was at 09:55 PM ----------
Should i reflash just rom and gapps and supersu after i boot up?

cell2011 said:
I did advance wipe cache system dalvik data and flashed rom gapps and super su 1.94
---------- Post added at 10:10 PM ---------- Previous post was at 09:55 PM ----------
Should i reflash just rom and gapps and supersu after i boot up?
Click to expand...
Click to collapse
There's no need to flash SuperSU . SuperUser is built in already and working. Wipe System, Data, Cache, and Dalvik. Then flash the ROM and gAPPS.
---------- Post added at 04:43 AM ---------- Previous post was at 04:17 AM ----------
Is anyone else getting a bootloop when clicking on reboot? I have to fully power down to be able to make it boot. Also, I'm unable to tick unknown sources when on another user (using Multi-Acc). Don't worry, I'm not downloading pirated apps xD. I download the APK's over at the Android Apps and Games forum.

Awesome work man! Flashing now...

This is great! Thank you Hashcode!
When I flash it, I get the error
Code:
mount: failed to mount /dev/block/platform/omap/omap_hsmmc.1/by-name/sys
(I can't read further)
Is this something to be worried about? It boots just fine.

Random Username said:
This is great! Thank you Hashcode!
When I flash it, I get the error
Code:
mount: failed to mount /dev/block/platform/omap/omap_hsmmc.1/by-name/sys
(I can't read further)
Is this something to be worried about? It boots just fine.
My other problem is that I can't log in with my Google account? Is this maybe related?
Click to expand...
Click to collapse
I get the same error and google account works fine for me

[RECOVERY][PRA-LX1][3.2.1] Haky86's TWRP for Huawei P8 Lite 2017

Hi folks
Here for you the initial stage of porting progress of TWRP for Huawei P8 Lite 2017 and similar phone.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
[/QUOTE]
Downloads
from basketbuilds:
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
How to Backup Your Firmware:
Reboot to TWRP by press on Vol up .
Go to Mount.
Uncheck the following partitions: Cache, Data & System.
Back to main menu and click on Backup, choose all partitions and swipe to start backup firmware to sdcard then.
Installation Guide:
download the latest image.
rename to recovery.img.
now reboot to fastboot mode by connecting the phone to the usb and press power + vol down.
now run the command: fastboot flash recovery recovery.img && fastboot reboot.
Install Root/SuperSu Permissions:
Download the edited SuperSu for Emui 5.0 from AndroidFileHost .
Reboot to recovery by power + vol up (make sure is not connected to usb port).
Go to Install.
Choose SuperSU-v2.79-201612051815-EMUI5.0.zip.
Use Swipes to install the package.
Once installation is terminated, tab on Reboot.
Your device will bootloop for only one time so don't panic, could take some time.
You should see SuperSu between apps then.
Works
Recovery.
Backing up images is done without problems not like Revolution recovery that I get many errors failed errors.
Wipes.
Both Internal & External sdcard.
Restore.
XDAevDB Information
TWRP for the Hauwei P8 Lite 2017 and similar variants
Contributors
@haky 86
Source Code:
device tree: https://github.com/hak86/android_device_huawei_prague
kernel GPL: https://github.com/hak86/android_kernel_huawei_prague
Version Information
Status: Stable
Created 2017-19-04
Last Updated 2016-19-04
Click to expand...
Click to collapse

Reserved
Reserved
Please do not quote
Will be released once I fix mounting issue.

Great , thanks​ a lot man

Great NEWS!!! Thanks a lot man!

Great thanks man!!

like others : great news !!!! and thank you

I almost done with it. keep in touch

haky 86 said:
I almost done with it. keep in touch
Click to expand...
Click to collapse
You are the king ?? waiting for it.

Reserved
-First beta has been released.
-Wipes should be fine.
-Backups is working (will be useful to backup your original firmware and save a copy on the computer).
-I will try to fix mounting internal and external storage bug.
-I'm not responsible for any damage caused by recovery.
Thanks for understanding

haky 86 said:
-First beta has been released.
-Wipes should be fine.
-Backups is working (will be useful to backup your original firmware and save a copy on the computer).
-I will try to fix mounting internal and external storage bug.
-I'm not responsible for any damage caused by recovery.
Thanks for understanding
Click to expand...
Click to collapse
Now can we flash SuperSU?? ?

peerpower said:
Now can we flash SuperSU??
Click to expand...
Click to collapse
I didn't try yet, will do a test once back to home.

haky 86 said:
I didn't try yet, will do a test once back to home.
Click to expand...
Click to collapse
Ok waiting for you lol )

Reserved
Release v2 of TWRP.
Please read the "change logs".

For install this twrp is necessary the bootloader unlocked?

sbarbi said:
For install this twrp is necessary the bootloader unlocked?
Click to expand...
Click to collapse
Yup, I'm gonna to make separate topic to unlock and root this phone and perhaps found a way how to reinstall the original firmware
Edit: will just update the topic to not create confusions.

haky 86 said:
Yup, I'm gonna to make separate topic to unlock and root this phone and perhaps found a way how to reinstall the original firmware
Edit: will just update the topic to not create confusions.
Click to expand...
Click to collapse
Pls share in here if you create another topic

peerpower said:
Pls share in here if you create another topic
Click to expand...
Click to collapse
Topic updated, please report :=)

haky 86 said:
Topic updated, please report :=)
Click to expand...
Click to collapse
WORKS PERFECTLY!!!!! JUST ROOTED YOU ARE THE KING:good::good::good::good:
---------- Post added at 06:28 PM ---------- Previous post was at 06:10 PM ----------
haky 86 said:
Topic updated, please report :=)
Click to expand...
Click to collapse
hey my friend i have one last question. Just downloaded fullota package.
Can i flash it with your twrp?
Thanks in advance for everything
And can you also please share stock recovery.img ? Just in case you know

peerpower said:
WORKS PERFECTLY!!!!! JUST ROOTED YOU ARE THE KING:good::good::good::good:
---------- Post added at 06:28 PM ---------- Previous post was at 06:10 PM ----------
hey my friend i have one last question. Just downloaded fullota package.
Can i flash it with your twrp?
Thanks in advance for everything
And can you also please share stock recovery.img ? Just in case you know
Click to expand...
Click to collapse
great!
I don't recommend to flash stock ota via twrp. I will upload 3rd build of twrp with some modification to the partitions that our device don't have.

haky 86 said:
great!
I don't recommend to flash stock ota via twrp. I will upload 3rd build of twrp with some modification to the partitions that our device don't have.
Click to expand...
Click to collapse
Yes but I believe if i flash stock recovery back I can easily update ota or install fullota. Am I correct?
Where we can get stock recovery ????

[ROM][discovery][PIE] Resurrection Remix [DISCONTINUED]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To God be the glory, I finally finished a XA2 Ultra build of Resurrection Remix! It's Resurrection Remix, Pie flavored!
WARNING: This is for phones that are now using the 50.2 firmware base! There is still an old build for the 50.1 firmware base, but I recommend you upgrade to 50.2 firmware.
"We work to make your android experience elegant. Handpicked features beautifully packed into one ROM."
**** This is an UNOFFICIAL ROM. Install at your own risk! ****
A huge thanks to the Resurrection Remix team!​
Another huge thanks goes out to @LuK1337 for all of the great development that he does on the Sony Xperia XA2 Ultra! He did most of the heavy lifting by making a great LineageOS build, upon which this RR is based. Please note, this is an UNOFFICIAL ROM.
Disclaimer: Resurrection Remix is not responsible for any damages to your device.
All of my work is completely available for any who wish to use or modify it. I didn't make Resurrection Remix, the device trees, or vendor blobs. I simply used and edited existing material. A huge thanks should go to those who actually created this stuff.
This Unofficial Resurrection Remix Pie ROM was built for H3223 (discovery), but may work on some of the other variants, please try at your own risk. However, if you do try it on another variant, please be sure to let me know in the comments how it worked.
Downloads:
Rom Download link:
WARNING: This is only for those on firmware versions 50.2.xxxxxx, not for those who are on firmware versions 50.1.xxxx. I recommend everyone update to 50.2 firmware!
http://www.mediafire.com/folder/el24nm0l3m38y/50.2_based
WARNING: This is only for those on firmware versions 50.1.xxxxxx, not for those who are on firmware versions 50.2.xxxx and up. This old version is not updated, but works fine.
http://www.mediafire.com/folder/15nb0swbcqcxi/50.1_based
If there is an ENG and USERDEBUG build, the ENG build is marked "ENG" for testing purposes only. You can install anything you want, but I recommend not installing the ENG build.
Gapps link:
http://opengapps.org/
If desired. Personally, I've gone Gapp-less.
Installation instructions:
-Download ROM and gapps, and put them on your removable sdcard storage. (Or leave on your computer and flash with adb sideload.)
-Reboot into the bootloader.
-Fastboot boot your TWRP.
-Backup what you had. (Just to be safe.)
-Wipe everything and format data.
-Install Rom. (Either from adb sideload or from your removable sdcard storage.)
!!!IF YOU GET AN ERROR, MAKE SURE YOU ARE USING THE LATEST TWRP!!!
-Reboot to system and enjoy!
If you also want Gapps:
-Reboot again into the bootloader.
-Fastboot boot your TWRP.
-Install Gapps. - Optional
If you plan to install magisk (good idea), then let the rom boot the first time, then go back to TWRP and flash magisk. This is optional, of course.
What works:
Code:
So far everything that I have tried works, such as
- Camera for pictures and video!
- Phone calls
- Data 3g/LTE
- Bluetooth
- WiFi
- MTP
- FM Radio
etc....
What doesn't:
Code:
- Nothing else that I know of, but if you find something, please let me know so we can try to fix it!
Source Code:
https://github.com/ResurrectionRemix
Official website:
http://www.resurrectionremix.com/
My device trees, vendor blobs, and kernel source:
https://gitlab.com/alaskalinuxuser/android_device_sony_discovery
ROM OS Version: 9.0 Pie
RR version: 7.0.2
ROM Kernel: Linux 4.4.153
Based On: The best of every ROM, but particularly based on LineageOS.
Created 2019-08-16
Last Updated 2019-11-04

Change log:
2019-08-17
RR accepted my commit:
https://github.com/ResurrectionRemi...mmit/db98cc9253b8680005b90122c48b40f633dc04e5
2019-08-16
-7.0.2 stable ENG and USERDEBUG build.
Had to edit a lot of whitelist permissions issues in RR itself to make this work. I created pull requests with RR, but if they don't add them, it makes repo sync difficult as I will have to make my edits all over again.

Rom notes:
As @Ultramanoid pointed out in LineageOS https://forum.xda-developers.com/showpost.php?p=80053444&postcount=219 You can use Open Camera to allow you to switch between all three cameras (one rear, two front).
Want to build your own custom kernels, custom roms, or learn the ins and outs of development? You can check out my video tutorials with over 24 hours of video and explanations here:
https://forum.xda-developers.com/android/general/guide-how-to-build-custom-roms-kernel-t3814251

Thanks given! Thank you so much man! Don't get me wrong I love Lineage but I was ready for some more rom love ?

Question though, I'm on the latest nightly of lineage, can I wipe and drop this gem on it with success?

appleknight said:
Thanks given! Thank you so much man! Don't get me wrong I love Lineage but I was ready for some more rom love ?
Click to expand...
Click to collapse
Yeah, I think @LuK1337 and the LineageOS team does a great job. I just like having a little variety, myself.
appleknight said:
Question though, I'm on the latest nightly of lineage, can I wipe and drop this gem on it with success?
Click to expand...
Click to collapse
You sure can, because that's what I just did. However, you may have to wipe and format data. :good:

Loving the rom keep up the good work? everything works but SD cards which was the same on lineage. Other than that this rom has the rr customization and is smooth like butter!

No issues here!

Yodasgodfather said:
Loving the rom keep up the good work everything works but SD cards which was the same on lineage. Other than that this rom has the rr customization and is smooth like butter!
Click to expand...
Click to collapse
appleknight said:
No issues here!
Click to expand...
Click to collapse
Great! Thanks guys! I used to build roms all the time, back before Oreo, but I took a break for a while and I'm trying to get back into the swing of things. I'll try to chase down that sdcard issue, I didn't have one in the phone to test it.
My usual MO is to build Lineage (already done by LuK1337), RR, AOKP, and SlimRoms (I don't think Slim has a working Pie at the moment), then move on to custom kernel work. We'll see what we can get done here. I also have two of these phones, so I'm hoping to finish building these roms, then update the phone to 50.2 firmware and update the device trees, kernel, and blobs to match and see if we can update the roms for the latest firmware. I can only image that @LuK1337 already tried this, so there must be some hangup in doing so, but we'll see what we can do. No promises, since I'm not the most skilled dev, but that's the overall plan.

Yodasgodfather said:
Loving the rom keep up the good work everything works but SD cards which was the same on lineage. Other than that this rom has the rr customization and is smooth like butter!
Click to expand...
Click to collapse
I just tested my sdcard, and it came right up. I could access the files and I started watching a video from there. What specifically doesn't work for you when you use an sdcard so I can troubleshoot that?

Oh? Well then what am I doing wrong cause for some reason the phone will freeze on setup unless I remove it? I dirty flash and follow the steps mentioned above? Perhaps is their a certain format aosp or certain Roms prefer like exfat or fat32... Etc

Yodasgodfather said:
Oh? Well then what am I doing wrong cause for some reason the phone will freeze on setup unless I remove it? I dirty flash and follow the steps mentioned above? Perhaps is their a certain format aosp or certain Roms prefer like exfat or fat32... Etc
Click to expand...
Click to collapse
Thanks for the info. So a few thoughts and questions, so we can get to the bottom of the issue:
Thought - I highly discourage dirty flashing. You never know what is left over from the last ROM. It makes trouble shooting very difficult.
Question - does it work without flashing gapps or magisk, just when you flash only the ROM? (This works for me here, just a clean install with only the ROM. I don't use gapps anymore, so that may matter.)
Question - if you do flash gapps or not, does it work if you boot the phone without it for the first boot, then power down and put it in for future use? E.g., does it work on subsequent boots, after setup is complete?
Question - what firmware are you running? And what phone variant?
Thanks, these things will help. Also, a huge help is pulling logs with logcat, so I can see the errors about the sdcard.
Question for the group: is anyone else successful in using the sdcard?

Just as a side note, I tried using the lineage addonsu zip(since this is lineage based). It definitely adds root to the developer options menu, but does nothing when an app tries to gain root( no dialog, toast etc..) just in case anyone wanted to know. So I went with magisk ?
---------- Post added at 06:20 PM ---------- Previous post was at 06:19 PM ----------
AlaskaLinuxUser said:
Thanks for the info. So a few thoughts and questions, so we can get to the bottom of the issue:
Thought - I highly discourage dirty flashing. You never know what is left over from the last ROM. It makes trouble shooting very difficult.
Question - does it work without flashing gapps or magisk, just when you flash only the ROM? (This works for me here, just a clean install with only the ROM. I don't use gapps anymore, so that may matter.)
Question - if you do flash gapps or not, does it work if you boot the phone without it for the first boot, then power down and put it in for future use? E.g., does it work on subsequent boots, after setup is complete?
Question - what firmware are you running? And what phone variant?
Thanks, these things will help. Also, a huge help is pulling logs with logcat, so I can see the errors about the sdcard.
Question for the group: is anyone else successful in using the sdcard?
Click to expand...
Click to collapse
No issues with sdcard here! H3223
---------- Post added at 06:26 PM ---------- Previous post was at 06:20 PM ----------
Question: is there a hide navbar setting? If so I missed it so I'm using an app called custom navigation bar, which I've had to use in the past, tho for some reason on this rom it's sometimes difficult to get to appear when you swipe up from the bottom, any ideas?
---------- Post added at 06:37 PM ---------- Previous post was at 06:26 PM ----------
AlaskaLinuxUser said:
Great! Thanks guys! I used to build roms all the time, back before Oreo, but I took a break for a while and I'm trying to get back into the swing of things. I'll try to chase down that sdcard issue, I didn't have one in the phone to test it.
My usual MO is to build Lineage (already done by LuK1337), RR, AOKP, and SlimRoms (I don't think Slim has a working Pie at the moment), then move on to custom kernel work. We'll see what we can get done here. I also have two of these phones, so I'm hoping to finish building these roms, then update the phone to 50.2 firmware and update the device trees, kernel, and blobs to match and see if we can update the roms for the latest firmware. I can only image that @LuK1337 already tried this, so there must be some hangup in doing so, but we'll see what we can do. No promises, since I'm not the most skilled dev, but that's the overall plan.
Click to expand...
Click to collapse
Would definitely love to see some slim love ? I developed for the z ultra back in the day. I never have the spare time anymore, full time parent n all

appleknight said:
Just as a side note, I tried using the lineage addonsu zip(since this is lineage based). It definitely adds root to the developer options menu, but does nothing when an app tries to gain root( no dialog, toast etc..) just in case anyone wanted to know. So I went with magisk
---------- Post added at 06:20 PM ---------- Previous post was at 06:19 PM ----------
No issues with sdcard here! H3223
---------- Post added at 06:26 PM ---------- Previous post was at 06:20 PM ----------
Question: is there a hide navbar setting? If so I missed it so I'm using an app called custom navigation bar, which I've had to use in the past, tho for some reason on this rom it's sometimes difficult to get to appear when you swipe up from the bottom, any ideas?
---------- Post added at 06:37 PM ---------- Previous post was at 06:26 PM ----------
Would definitely love to see some slim love ? I developed for the z ultra back in the day. I never have the spare time anymore, full time parent n all
Click to expand...
Click to collapse
Hear you there, I've got three and one in the oven! Kids are great, but they'll keep you busy!
As for the Nav bar, go to settings, RR tools, navigation, navigation, enable nav bar. :good:
There are several options as well, fling, standard, edited, etc. You'd have to play with them to get it all sorted out how you like it.

Congrats man! I meant to autohide the navbar, I don't see an option for it.

It doesn't I'm not able to access it. Doesn't matter if I flash gapps or not the phone will not boot properly with the SD card in and it works fine on stock. It was the same issue on lineage os. The setup will be stuck in a loop say its searching for networks and eventually crash the system. When I inserted it just now it kept saying "phone is starting" and just crashed. Should I try formatting the SD card? I have xa2 ultra h3223 just in case your wondering...

appleknight said:
Congrats man! I meant to autohide the navbar, I don't see an option for it.
Click to expand...
Click to collapse
Thanks! Sorry I didn't understand your request. Yes, the "expanded desktop" option will auto hide the status bar and/or the navbar per your preferences. Settings, display, advanced, expanded desktop. A swipe up brings the bar back. :good:
Yodasgodfather said:
It doesn't I'm not able to access it. Doesn't matter if I flash gapps or not the phone will not boot properly with the SD card in and it works fine on stock. It was the same issue on lineage os. The setup will be stuck in a loop say its searching for networks and eventually crash the system. When I inserted it just now it kept saying "phone is starting" and just crashed. Should I try formatting the SD card? I have xa2 ultra h3223 just in case your wondering...
Click to expand...
Click to collapse
I think formatting the card would be wise. If you used it as "built in" storage before, instead of for transferring files (the initial question it asks when you first put one in) you can run into trouble with it on other ROMs or phones. I have the same phone, and it is working for me and for appleknight, so it must be something with your phone or card. Let me know if formatting helps. :good:

Ah that works, still for some reason though I have to swipe a few times to get it to appear, almost seems like the sensitivity is off or something it's weird
---------- Post added at 12:26 AM ---------- Previous post was at 12:08 AM ----------
So do you think the RR team will make this an official build? ?

appleknight said:
[/COLOR]So do you think the RR team will make this an official build?
Click to expand...
Click to collapse
Not likely.... They'd need a device maintainer. You know, some skilled dev to keep things working and running smooth. As far as I know, LuK is too busy. :silly:

So far I really like this as my daily driver