Hello good people,
long story short i've got my honor 8 (FRD-L09) unlocked rooted and so on, i was running HalogenOS which is a great rom, for some reason unknown to me it has bricked it'self. No problem just flashed via the sd card the stock EMUI and from there on for lack of time i've never come around at flashing back HalogenOS since i hate EMUI. Tonight i've tried but i'm not able to install any rom, i always get bootloop. I've tried RR, lineage, Carbon and HalogenOS but none of them have worked. A side note that maybe can reveal something, the only TWRP that works is the one from the OpenKirin's Team. I hope someone can help, i've haven't found anything online about this.
Thanks
Bistekka said:
Hello good people,
long story short i've got my honor 8 (FRD-L09) unlocked rooted and so on, i was running HalogenOS which is a great rom, for some reason unknown to me it has bricked it'self. No problem just flashed via the sd card the stock EMUI and from there on for lack of time i've never come around at flashing back HalogenOS since i hate EMUI. Tonight i've tried but i'm not able to install any rom, i always get bootloop. I've tried RR, lineage, Carbon and HalogenOS but none of them have worked. A side note that maybe can reveal something, the only TWRP that works is the one from the OpenKirin's Team. I hope someone can help, i've haven't found anything online about this.
Thanks
Click to expand...
Click to collapse
long story short
you didn't even tried to read the instructions on how to install treble rom
don't lie and spam the discussion after less than 2min of troubleshooting
flashing:
1. you should be on Emui8, if not - Read the tutorial here on xda (there are a few of them)
2.read the instructions that are written on openkirin.net
3.Done
Jelke997 said:
long story short
you didn't even tried to read the instructions on how to install treble rom
don't lie and spam the discussion after less than 2min of troubleshooting
flashing:
1. you should be on Emui8, if not - Read the tutorial here on xda (there are a few of them)
2.read the instructions that are written on openkirin.net
3.Done
Click to expand...
Click to collapse
I've asked this to find an answer, but the one who does not read is you, i haven't tried install any rom with project treble, all the rom that i've tried are based on 7.1.2 not 8.0.0 so the problem is another one. i've followed the same guide as the first time that i've done it, same exact scenario, but this time no results. I don't lie, i've tried so many times, and i have not spammed anything,
Related
Hi all
I have just bought a new Oneplus 6 and wanted to install Lineage Os.
I had initially set up the OP6 with my google account and installed some minimum apps over a couple of days. The phone updated a couple of times. I think I started on Android 8, it definitely updated to Android 9 and I think it updated to Android 10. But I am not completely sure of this because I did not take notice at that stage because I didn't realise that this might have significance..
I followed the guide from the lineaoge os wiki here
wiki.lineageos.org/devices/enchilada[
I got as far as using adb to Fastboot boot twrp-3.3.1-2-enchilada.img (which was the latest image in the dl.twrp.me/enchilada/
It then got stuck in the qualcomm crashdump line on screen.
I spent a day checking posts, including here on XDA. There are a lot of posts dealing with this issue and I did try to follow some of them with less or more success but no resolve. I downloaded Android 9.02 and used the following instructions
techtrickz.com/how-to/recover-oneplus-6-and-6t-from-qualcomm-crashdump-mode/
The routine started to run and then posted a series of error messages and exited. ( I have a screenshot of the terminal window but cannot see a way to post it here)
I have tried to research this further and there are plenty of posts and lots of suggestions. But to be honest I have become confused as some of the posts give significantly different solutions to each other.
I wondered whether it would be possible to give me some help or point me in the right direction to a post which is current and has the steps that I am likely to need succeed..
Thanks in advance for any help you can give.
grego34 said:
Hi all
I have just bought a new Oneplus 6 and wanted to install Lineage Os.
I had initially set up the OP6 with my google account and installed some minimum apps over a couple of days. The phone updated a couple of times. I think I started on Android 8, it definitely updated to Android 9 and I think it updated to Android 10. But I am not completely sure of this because I did not take notice at that stage because I didn't realise that this might have significance..
I followed the guide from the lineaoge os wiki here
wiki.lineageos.org/devices/enchilada[
I got as far as using adb to Fastboot boot twrp-3.3.1-2-enchilada.img (which was the latest image in the dl.twrp.me/enchilada/
It then got stuck in the qualcomm crashdump line on screen.
I spent a day checking posts, including here on XDA. There are a lot of posts dealing with this issue and I did try to follow some of them with less or more success but no resolve. I downloaded Android 9.02 and used the following instructions
techtrickz.com/how-to/recover-oneplus-6-and-6t-from-qualcomm-crashdump-mode/
The routine started to run and then posted a series of error messages and exited. ( I have a screenshot of the terminal window but cannot see a way to post it here)
I have tried to research this further and there are plenty of posts and lots of suggestions. But to be honest I have become confused as some of the posts give significantly different solutions to each other.
I wondered whether it would be possible to give me some help or point me in the right direction to a post which is current and has the steps that I am likely to need succeed..
Thanks in advance for any help you can give.
Click to expand...
Click to collapse
I would recommend using fastboot flashable stock rom from here. People also like to use msmtool, but I feel like it is an overkill.
Please note this warning:
These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie.
So grab the latest oxygen os 10, and follow the instructions to flash it. After that, if you are feeling a bit paranoid maybe download a zip from oneplus and do a local update. You now should have your phone back.
Official TWRP does not support android 10 yet, as far as I understand, so that is probably the issue. If you want lineageos 16, you should downgrade to android 9 using a downgrade package provided by oneplus and then update to Oxygen OS 9.0.9.
There is unofficial twrp by mauronofrio that supports android 10. If you want to go from OOS 10 to some other android 10 rom
[email protected] said:
I would recommend using fastboot flashable stock rom from here. People also like to use msmtool, but I feel like it is an overkill.
Please note this warning:
These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie.
So grab the latest oxygen os 10, and follow the instructions to flash it. After that, if you are feeling a bit paranoid maybe download a zip from oneplus and do a local update. You now should have your phone back.
Official TWRP does not support android 10 yet, as far as I understand, so that is probably the issue. If you want lineageos 16, you should downgrade to android 9 using a downgrade package provided by oneplus and then update to Oxygen OS 9.0.9.
There is unofficial twrp by mauronofrio that supports android 10. If you want to go from OOS 10 to some other android 10 rom
Click to expand...
Click to collapse
Thanks very much for your helpful reply. I am now back to a working phone with Oxygen os10. And you have also explained what was wrong when I tried to fix it, I was trying to load an Oxygen Os 9 on a phone that had already been upgraded to 10 and you have explained what went wrong in the first place, I was trying to flash an incompatible TWRP image onto Android 10. So your short post has explained a lot. Thank you.
I am not feeling paranoid unless you advise that I should be and I do want to install lineage os. So I need to revert to Oxygen Os9. I have looked on the Oneplus site and that have found the option to Upgrade to 10.3 but no option to downgrade. In the Oneplus community there is a link to downloadable ROMs, these are divided into a number of folders some of which look not applicable. There are three folders that look of interest
1. Signed flashable zips
2. OTA incremental update zips
3. Stock boot-recovery images
Here is the link /forums.oneplus.com/threads/oneplus-6-rom-ota-oxygen-os-mirrors-for-official-oxygen-os-roms-and-ota-updates.835607/
I can see it is not the OTA Incremental that I need but am unsure if it is signed flashable zips or Stock boot recovery images. or whether it is neither.
Do I flash as normal or would it be a local update?
I would be grateful for any further advice.
Thanks again and for any help provided now.
grego34 said:
Thanks very much for your helpful reply. I am now back to a working phone with Oxygen os10. And you have also explained what was wrong when I tried to fix it, I was trying to load an Oxygen Os 9 on a phone that had already been upgraded to 10 and you have explained what went wrong in the first place, I was trying to flash an incompatible TWRP image onto Android 10. So your short post has explained a lot. Thank you.
I am not feeling paranoid unless you advise that I should be and I do want to install lineage os. So I need to revert to Oxygen Os9. I have looked on the Oneplus site and that have found the option to Upgrade to 10.3 but no option to downgrade. In the Oneplus community there is a link to downloadable ROMs, these are divided into a number of folders some of which look not applicable. There are three folders that look of interest
1. Signed flashable zips
2. OTA incremental update zips
3. Stock boot-recovery images
Here is the link /forums.oneplus.com/threads/oneplus-6-rom-ota-oxygen-os-mirrors-for-official-oxygen-os-roms-and-ota-updates.835607/
I can see it is not the OTA Incremental that I need but am unsure if it is signed flashable zips or Stock boot recovery images. or whether it is neither.
Do I flash as normal or would it be a local update?
I would be grateful for any further advice.
Thanks again and for any help provided now.
Click to expand...
Click to collapse
I have had luck with this downgrade package. I basically googled it, the package is hosted on a legitimate website, so that's what I used. Just download it, put it on your phone and do a local upgrade through updater app.
Once you have done that I would recommend upgrading to the latest Android 9, which is OOS version 9.0.9 I believe. Then go ahead and follow instructions to install lineageos.
I am actually on LineageOS 16 + MicroG right now, so I ran into the same problems you did Glad I could help!
TexnoViking said:
I have had luck with //oxygenos.oneplus.net/fulldowngrade_wipe_MSM_17819_181025_2315_user_MP1_release.zip" downgrade package. I basically googled it, the package is hosted on a legitimate website, so that's what I used. Just download it, put it on your phone and do a local upgrade through updater app.
Once you have done that I would recommend upgrading to the latest Android 9, which is OOS version 9.0.9 I believe. Then go ahead and follow instructions to install lineageos.
I am actually on LineageOS 16 + MicroG right now, so I ran into the same problems you did Glad I could help!
Click to expand...
Click to collapse
Thanks so much for your reply again.
I used your downgrade link and that all worked well and then let it upgrade to OOS 9.0.9. Again all very positive.
I then tried to flash TWRP to the device using this image "twrp-3.3.1-2-enchilada.img" It appeared to flash okay. Then I issued the command
"fastboot boot twrp-3.3.1-2-enchilada.img" over my adb connection and it returned to the Qualcomm Crashdump error.
I presume I have to start again with the exception that this time I can use a flashable stock rom that is OOS 9.09? Is that correct?
Then do you have any suggestions for getting round the TWRP problem? Did you use a different version?
Thanks in advance for any help.
grego34 said:
Thanks so much for your reply again.
I used your downgrade link and that all worked well and then let it upgrade to OOS 9.0.9. Again all very positive.
I then tried to flash TWRP to the device using this image "twrp-3.3.1-2-enchilada.img" It appeared to flash okay. Then I issued the command
"fastboot boot twrp-3.3.1-2-enchilada.img" over my adb connection and it returned to the Qualcomm Crashdump error.
I presume I have to start again with the exception that this time I can use a flashable stock rom that is OOS 9.09? Is that correct?
Then do you have any suggestions for getting round the TWRP problem? Did you use a different version?
Thanks in advance for any help.
Click to expand...
Click to collapse
Hm. Yes, unfortunately the safest thing to do is to start again. But you can start with 9.0.9 right away.
People have been discussing a similar issue here. It seems like using unofficial twrp by blu_spark helps. Maybe twrp-3.2.3-x_blu_spark_v9.91_op6.img or maybe try the latest one.
Also, make sure you read the instructions on lineageos website. Make sure you have oem unlocked, usb debugging enabled and you clicked "always give access to this" device or something, do the fastboot set_active a. I have also used fastboot flash boot_a <recovery_filename>.img. However, I do recall using fastboot boot <recovery_filename>.img some other time and I think it worked....
Anyway, yeah, maybe try this modified recovery by blu spark and follow the instructions carefully.
TexnoViking said:
Hm. Yes, unfortunately the safest thing to do is to start again. But you can start with 9.0.9 right away.
People have been discussing a similar issue here. It seems like using unofficial twrp by blu_spark helps. Maybe twrp-3.2.3-x_blu_spark_v9.91_op6.img or maybe try the latest one.
Also, make sure you read the instructions on lineageos website. Make sure you have oem unlocked, usb debugging enabled and you clicked "always give access to this" device or something, do the fastboot set_active a. I have also used fastboot flash boot_a <recovery_filename>.img. However, I do recall using fastboot boot <recovery_filename>.img some other time and I think it worked....
Anyway, yeah, maybe try this modified recovery by blu spark and follow the instructions carefully.
Click to expand...
Click to collapse
Thanks very much for your helpful reply and apologies for the delay in my reply to this post, I have been tied up with work the last couple of days.
I did re-install OOS 9 and then followed the instructions on the Team Win site to install TWRP in the Oneplus6. I had success after I used the latest TWRP image and zip from that site . I was then able to install Lineage OS and Microg as I wished.
So thanks for the help all. Really appreciated.
grego34 said:
Thanks very much for your helpful reply and apologies for the delay in my reply to this post, I have been tied up with work the last couple of days.
I did re-install OOS 9 and then followed the instructions on the Team Win site to install TWRP in the Oneplus6. I had success after I used the latest TWRP image and zip from that site . I was then able to install Lineage OS and Microg as I wished.
So thanks for the help all. Really appreciated.
Click to expand...
Click to collapse
Great! I am glad you managed to fix your phone! Enjoy
Wow, someone reading a post on a dead phone... Anyways,
Hi, and I've got an honor 4c and the phone has gotten very slow . I have tried many many ways to make it better but none does anything. So I had come up with looking for a custom rom for it. I tried to flash this nougat lineage for this device but TWRP returned error 7 flashing it. Also, the ROM seemed quite broken and felt not worth installing.
However, I found out that it's possible to flash P8 lite ROMs on this device. I found a post which gives hope that you CAN install custom roms on this device. Well, I tried what that post said but I got stuck at flashing P8 firmware on this device. I didn't proceed with installing it because that person said
flashing the wrong firmware could cause bricking the phone. Couldn't find any tutorial telling how could I get custom rom on it.
So, after many months I thought to look for it again. So, I ended up here. Posting. So, my question,
Can you install a working custom ROM on this phone? If yes, then how?
Waiting for someone to answer, because I badly need a ROM for this phone.
Edit: spellings and mistakes
Greetings Everyone,
I'm sorry if this has already been mentioned somewhere. I wasn't able to find an answer specific to my issue and threads I did read about returning to OOS are mostly contradictory.
Right now, I'm using AOSiP 9.0 and not so happy with it's performance. It's OK, but not so smooth - lot of lagging and the occasional random reboot. I would like to return to the stock OOS firmware, but I'm really having troubles knowing exactly how to do so. My phone is currently rooted and I'm using Magisk 20.3 and TWRP 3.3.1-75.
Would someone be willing to explain specifically what steps I should take in order to get OOS installed properly? Or perhaps lead me to a thread that I may have missed?
The following is what I'd like to have happen:
Return to current OOS from AOSiP
Keep root access
Install both TWRP and Magisk
Any assistance would be greatly appreciated. Obviously, I don't want to brick my phone.
Thank you!
Andrea
AndreaV94 said:
Greetings Everyone,
I'm sorry if this has already been mentioned somewhere. I wasn't able to find an answer specific to my issue and threads I did read about returning to OOS are mostly contradictory.
Right now, I'm using AOSiP 9.0 and not so happy with it's performance. It's OK, but not so smooth - lot of lagging and the occasional random reboot. I would like to return to the stock OOS firmware, but I'm really having troubles knowing exactly how to do so. My phone is currently rooted and I'm using Magisk 20.3 and TWRP 3.3.1-75.
Would someone be willing to explain specifically what steps I should take in order to get OOS installed properly? Or perhaps lead me to a thread that I may have missed?
The following is what I'd like to have happen:
Return to current OOS from AOSiP
Keep root access
Install both TWRP and Magisk
Any assistance would be greatly appreciated. Obviously, I don't want to brick my phone.
Thank you!
Andrea
Click to expand...
Click to collapse
Has nobody successfully done this before, hence the lack of any replies? And yes, I have searched. Multiple times. Here on this site, via Google, Bing, etc. I have been unable to find any specific in regards to my questions. And the few posts that I have found that do mention about returning to stock OOS all mention a complete different/contradictory method. I really do not wish to destroy my phone by attempting to do this. But I also don't wish to use the AOSiP ROM any longer either. If there is anyone who could offer anything helpful, I'd really appreciate it. Thank you!
If you want go back to stock, the only option is to factory reset the device by flashing the latest OOS firmware on both slots via twrp. After this, flash twrp again and magisk. Else, you could download the fastboot firmware from xda and run the flashall.bat and return to full stock. After this flash twrp and magisk. If all else fails, MSM tool is the last bet
AndreaV94 said:
Has nobody successfully done this before, hence the lack of any replies? And yes, I have searched. Multiple times. Here on this site, via Google, Bing, etc. I have been unable to find any specific in regards to my questions. And the few posts that I have found that do mention about returning to stock OOS all mention a complete different/contradictory method. I really do not wish to destroy my phone by attempting to do this. But I also don't wish to use the AOSiP ROM any longer either. If there is anyone who could offer anything helpful, I'd really appreciate it. Thank you!
Click to expand...
Click to collapse
I am holding off, flashing custom ROMs for the same reason. Also did a search. Not very phone specific instructions. First time owning a device like this. How somebody could chime in that knows
Hello Everyone.
Been rooting since my first HTC Hero- never thought of myself as a noob until this One Plus 7 Pro! Its the US/Global unlocked model. This thing is KILLING ME!
I've followed about 5 different "rooting for beginners" threads from different sites and I still cannot get a basic, working root. I have unlocked bootloader with no issue.
I've had fastboot bootloops, lineage OS bootloops, stock Rom bootloops, stock rom booting up but wifi did not work. I've tried everything on Oxygen 9 and 10 (using the respective TWRP). I've used official and unofficial TWRPs, different versions of Magisk.
I've used the msm tool to reset this thing about 7 times! So as you can see, I'm at a loss.
The only thing I can think of is that I'm screwing something up as it relates to TWRP and Magisk and my flashing/booting process with the A/B slot stuff. Read threads on the benefits of A/B phones...but since I'm having so much trouble, I hate it!
Overall my goal is to get a stock rom rooted; but I couldn't resolve the no wifi toggle issue. I read on one thread that I just needed to flash a custom kernel. If that is the only actual fix, then I should be good to go, but I'm skeptical and figured I messed something up.
So like my title says - Is there any thread out there that someone can refer me to?
Thanks in advance.
Bruce777 said:
Hello Everyone.
Been rooting since my first HTC Hero- never thought of myself as a noob until this One Plus 7 Pro! Its the US/Global unlocked model. This thing is KILLING ME!
I've followed about 5 different "rooting for beginners" threads from different sites and I still cannot get a basic, working root. I have unlocked bootloader with no issue.
I've had fastboot bootloops, lineage OS bootloops, stock Rom bootloops, stock rom booting up but wifi did not work. I've tried everything on Oxygen 9 and 10 (using the respective TWRP). I've used official and unofficial TWRPs, different versions of Magisk.
I've used the msm tool to reset this thing about 7 times! So as you can see, I'm at a loss.
The only thing I can think of is that I'm screwing something up as it relates to TWRP and Magisk and my flashing/booting process with the A/B slot stuff. Read threads on the benefits of A/B phones...but since I'm having so much trouble, I hate it!
Overall my goal is to get a stock rom rooted; but I couldn't resolve the no wifi toggle issue. I read on one thread that I just needed to flash a custom kernel. If that is the only actual fix, then I should be good to go, but I'm skeptical and figured I messed something up.
So like my title says - Is there any thread out there that someone can refer me to?
Thanks in advance.
Click to expand...
Click to collapse
What version of the is are you on right now
I just reset with the msm tool, so it's back to OOS 9.5.3GM21AA.
It will take OTA updates fine up until before the 11 beta
My model is GM1917 (12GB RAM + 256GB ROM)
Bruce777 said:
Hello Everyone.
Been rooting since my first HTC Hero- never thought of myself as a noob until this One Plus 7 Pro! Its the US/Global unlocked model. This thing is KILLING ME!
I've followed about 5 different "rooting for beginners" threads from different sites and I still cannot get a basic, working root. I have unlocked bootloader with no issue.
I've had fastboot bootloops, lineage OS bootloops, stock Rom bootloops, stock rom booting up but wifi did not work. I've tried everything on Oxygen 9 and 10 (using the respective TWRP). I've used official and unofficial TWRPs, different versions of Magisk.
I've used the msm tool to reset this thing about 7 times! So as you can see, I'm at a loss.
The only thing I can think of is that I'm screwing something up as it relates to TWRP and Magisk and my flashing/booting process with the A/B slot stuff. Read threads on the benefits of A/B phones...but since I'm having so much trouble, I hate it!
Overall my goal is to get a stock rom rooted; but I couldn't resolve the no wifi toggle issue. I read on one thread that I just needed to flash a custom kernel. If that is the only actual fix, then I should be good to go, but I'm skeptical and figured I messed something up.
So like my title says - Is there any thread out there that someone can refer me to?
Thanks in advance.
Click to expand...
Click to collapse
If you are still on Android 10,take a look at the following guide.
[Guide] [Android 9/10] [7/7Pro] Unlock, TWRP, Root, and Update
------------------------------------------ Latest update to guide: Jul. 5, 2020 ------------------------------------------ Hi everyone! Many users browse these forums coming from Google or YouTube and have trouble navigating between many guides...
forum.xda-developers.com
Gr8man001 said:
If you are still on Android 10,take a look at the following guide.
[Guide] [Android 9/10] [7/7Pro] Unlock, TWRP, Root, and Update
------------------------------------------ Latest update to guide: Jul. 5, 2020 ------------------------------------------ Hi everyone! Many users browse these forums coming from Google or YouTube and have trouble navigating between many guides...
forum.xda-developers.com
Click to expand...
Click to collapse
I did that exact one a couple of times and when I get it back booted into stock the Wi-Fi does not work. The toggle stays in the off position.
Gr8man001 said:
If you are still on Android 10,take a look at the following guide.
[Guide] [Android 9/10] [7/7Pro] Unlock, TWRP, Root, and Update
------------------------------------------ Latest update to guide: Jul. 5, 2020 ------------------------------------------ Hi everyone! Many users browse these forums coming from Google or YouTube and have trouble navigating between many guides...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks Gr8man001.
Thought I had done this guide before and done it correctly but I buckled down and tried it once more (slow as molasses) and was able to get twrp and root! Appreciate it.
I was under the impression my phone was compatible and began the install instructions for LineageOS after unlocking my phone through this guide. I flashed the two partitions, flashed the recovery, attempted to boot into recovery and it gets stuck on boot. After attempting to ask the LineageOS community I realized Verizon's version is not supported, woo. I then tried to follow the unlock guide to flash back the stock image and Msm fails on Param preload with the error "Device not match image." Googling that I only found someone implying they were using the incorrect global image, however, I know I'm not. Is it possible to recover my phone now and if so, how?
LineageOS is a base ROM for many other custom ROMs such as crDroid. Try using their recoveries and installation guides; crDroid worked perfectly in the past.
Xryphon said:
LineageOS is a base ROM for many other custom ROMs such as crDroid. Try using their recoveries and installation guides; crDroid worked perfectly in the past.
Click to expand...
Click to collapse
I'm waiting for the phone to recharge now before attempting. I feel like it will fail however as the crDroid steps require you having stock 11 on "both slots." I am too new to this scene to understand what that means or if I can even do that anymore.
rusty-op8 said:
I'm waiting for the phone to recharge now before attempting. I feel like it will fail however as the crDroid steps require you having stock 11 on "both slots." I am too new to this scene to understand what that means or if I can even do that anymore.
Click to expand...
Click to collapse
You might want to the follow this guide as a basic requirement for flashing any Custom ROM on 'instantnoodle'.
It's always good to re-read, proofread and re-read again before proceeding.
rodken said:
You might want to the follow this guide as a basic requirement for flashing any Custom ROM on 'instantnoodle'.
It's always good to re-read, proofread and re-read again before proceeding.
Click to expand...
Click to collapse
Thank you for the resource. I will attempt this instead once I can. I see that it makes a very important note about copying slot a to b to prevent potential hard-bricks. Since the "official" guide I started with did not mention that before I attempted going down this route, does this mean I'm ruined anyways? I only flashed 2 "boot" images and then the recovery image when this happened. This is all because I was using 19.1 without realizing that a) it's A12 and b) one of the maintainers said the Verizon version wasn't supported. Seeing as I can grab the last 18.1 from the link you provided me, maybe there's hope after all.
rusty-op8 said:
Thank you for the resource. I will attempt this instead once I can. I see that it makes a very important note about copying slot a to b to prevent potential hard-bricks. Since the "official" guide I started with did not mention that before I attempted going down this route, does this mean I'm ruined anyways? I only flashed 2 "boot" images and then the recovery image when this happened. This is all because I was using 19.1 without realizing that a) it's A12 and b) one of the maintainers said the Verizon version wasn't supported. Seeing as I can grab the last 18.1 from the link you provided me, maybe there's hope after all.
Click to expand...
Click to collapse
All is not lost as long as your device can power on and is not completely bricked.