Team Win Recovery Project
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about doing this to your device
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
- I am not responsible about any damage of any kind that this custom binary may cause.
- Please read the whole main post & related ones before proceed and follow the guide as it is wrote. I will not offer support for any issues that have been already stated.
- Your Knox Warranty Bit will be blown once you flash this or others custom binaries, preventing you to use Knox TZ Features. It can't be resetted in any way, so think twice before flashing this.
- Bugs can be reported here in XDA or via our Telegram Group. Please be more clear as possible and make sure you provide detailed info when reporting bugs (device variant and logcat).
- If you like my work please hit the "Thanks" button to support me. You're also free to donate me via my donation link here in XDA.
What is TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, root your device and more.
Read more about TWRP here: https://twrp.me/about/
How to flash and setup it completely?
- First, make sure your phone isn't RMM Locked.
- Download Odin3 v3.13.1, Samsung USB Drivers, latest TWRP's tar for your variant, latest no-verity-opt-encrypt zip and RMM Bypass v3 zip.
- Go to Settings App, Developer Options and enable OEM Unlock (If you don't see Developer Setings, go into About phone>Software info and tap "Build number" 10 times to show Developer Options menu).
- Do a backup of all your important data and files in your phone.
- Shutdown the phone. Once it's off, Power it On in Download Mode (Press and hold Power, Vol + and Vol - buttons together)
- Connect your phone in your PC, open Odin3, go in Option section and untick "Auto-reboot". Once that click the "AP" button and select the TWRP tar you downloaded before, then press the "Start" button.
- Once Odin3 finished to flash the recovery (you should see a "PASS" message), force reboot your phone (Press and hold Power and Vol - buttons together) and once the screen is off, press and hold Power and Vol + buttons together to boot in TWRP.
- Once TWRP is booted you first need to decrypt your /data partition. To do so touch Wipe>Format Data and follow the instructions in screen.
- Once it finished go back at the home screen and touch Reboot>Recovery. TWRP should be able to mount your data partition. Now copy the no-verity-opt-encrypt and RMM Bypass zip you downloaded before and flash them (touch Install and select each zip to flash it)
- You're now able to reboot to your OS without re-encrypting /data partition and without RMM Prenormal lock.
Download:
Galaxy A8 2018 (jackpotlte):
https://twrp.me/samsung/samsunggalaxya82018.html
Galaxy A8+ 2018 (jackpot2lte):
https://twrp.me/samsung/samsunggalaxya8plus2018.html
Sources:
Kernel Source Code: https://github.com/devkingsteam/android_kernel_samsung_universal7885/
Device Tree (jackpotlte): https://github.com/TeamWin/android_device_samsung_jackpotlte
Device Tree (jackpot2lte): https://github.com/TeamWin/android_device_samsung_jackpot2lte
Changelog:
Check Post #2.
A8 2018 Community Telegram Group:
Invite Link
Credits:
- Samsung for kernel source code
- TeamWin for their awesome recovery
- @ananjaser1211 and @McFy for their help and support
- @SaboorTheCool for testing out the recovery
XDA:DevDB Information
TWRP for Galaxy A8 2018, Tool/Utility for the Samsung Galaxy A8 (2018)
Contributors
BlackMesa123
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Current Stable Version: 3.3.1-0
Stable Release Date: 2019-05-20
Created 2018-07-18
Last Updated 2019-06-17
Changelog:
Note that this page only includes device-specific changes. For global TWRP changes, go to twrp.me.
20180921 (3.2.3-0)
- Updated kernel source code
- Fixed USB OTG
- Enabled FBE support (general AOSP only, Samsung method is still not supported)
20180730 (3.2.3-0)
- Removed /preload from partitions table
- Added /system_image (raw system partition backup)
- Enabled software encryption support (general AOSP only, Samsung method is still not supported)
20180718 (3.2.2-0)
- First release
Reserved
Nice work Mesa, keep it up
Amazing work mesa, you are doing to this community many favours
BlackMesa123 said:
20180718 (3.2.2-0)
- First release
Click to expand...
Click to collapse
Preload is not installed. A8+
---------- Post added at 08:46 AM ---------- Previous post was at 08:44 AM ----------
Has anyone got root on oreo? I have on A8 + flies imei
salimskiy said:
Preload is not installed. A8+
---------- Post added at 08:46 AM ---------- Previous post was at 08:44 AM ----------
Has anyone got root on oreo? I have on A8 + flies imei
Click to expand...
Click to collapse
You can ignore that warning lol. What about IMEI? Please be more clear
BlackMesa123 said:
You can ignore that warning lol. What about IMEI? Please be more clear
Click to expand...
Click to collapse
When I get root on oreo, flies imei. I tried on the stock core and on the custom. I waved SuperSu and Magisk.Sorry for bad english.
salimskiy said:
When I get root on oreo, flies imei. I tried on the stock core and on the custom. I waved SuperSu and Magisk.Sorry for bad english.
Click to expand...
Click to collapse
SuperSU is outdated so is highly not recommended. Did you flashed SuperSU uninstaller zip before flashing Magisk?
BlackMesa123 said:
SuperSU is outdated so is highly not recommended. Did you flashed SuperSU uninstaller zip before flashing Magisk?
Click to expand...
Click to collapse
I was running Magisk on a clean firmware. V16.00 does not install root, and imei flies. V16.6 root is received, but imei also flies.
SuperSu put then just to check for a clean rom and imei also flies.
salimskiy said:
I was running Magisk on a clean firmware. V16.00 does not install root, and imei flies. V16.6 root is received, but imei also flies.
SuperSu put then just to check for a clean rom and imei also flies.
Click to expand...
Click to collapse
I've a feeling it may be the kernel since in Oreo kernel Sammy added more RKP security. Gonna release probably a snapshot of my custom kernel without upstream temporarely then bump the version when upstream is done. So please have a bit of patience, give me the time to merge all the MCK N v2.1 tweaks/edits into Oreo source code
BlackMesa123 said:
I've a feeling it may be the kernel since in Oreo kernel Sammy added more RKP security. Gonna release probably a snapshot of my custom kernel without upstream temporarely then bump the version when upstream is done. So please have a bit of patience, give me the time to merge all the MCK N v2.1 tweaks/edits into Oreo source code
Click to expand...
Click to collapse
Ok.Thank you
---------- Post added at 09:37 AM ---------- Previous post was at 09:35 AM ----------
BlackMesa123 said:
I've a feeling it may be the kernel since in Oreo kernel Sammy added more RKP security. Gonna release probably a snapshot of my custom kernel without upstream temporarely then bump the version when upstream is done. So please have a bit of patience, give me the time to merge all the MCK N v2.1 tweaks/edits into Oreo source code
Click to expand...
Click to collapse
Ok.Thank you.N v2.1 I did not start. V1.o ok.
---------- Post added at 09:49 AM ---------- Previous post was at 09:37 AM ----------
Kernel sources already exist.Here I downloaded and perezalil on mega.https://mega.nz/#!zVVDVYTQ!9BQpThiZ_SJqQg_1W3C8jDz2CeBF9slrfQsLX8ftO7E
salimskiy said:
Ok.Thank you.N v2.1 I did not start. V1.o ok.
Click to expand...
Click to collapse
Yeah that's upstream related. I need time to update the Linux sources correctly in order to not make any issue happen like N v2/v2.1 lel
I'll wait, and then I have rom without root. Many thanks to you
Does this work with the a8 a530w, the Canadian variant?
Jugstah said:
Does this work with the a8 a530w, the Canadian variant?
Click to expand...
Click to collapse
Yeah, it has been tested on that variant actually lol. Should works aswell too for A530N
No sim and imei after update to oreo
After root with twrp using magisk the device don't see the sim
What can i do, now im come back to nougat
WilliamJ123 said:
After root with twrp using magisk the device don't see the sim
What can i do, now im come back to nougat
Click to expand...
Click to collapse
It's not a TWRP issue, and it's still unknown if it's a Magisk bug or (high probably) a sort of new anti-root protection by Sammy. I'll check A8 firmware once I get free time
WilliamJ123 said:
After root with twrp using magisk the device don't see the sim
What can i do, now im come back to nougat
Click to expand...
Click to collapse
Where you able to downgrade to n by using Odin?
Sent from my SM-A730F using xda premium
BlackMesa123 said:
It's not a TWRP issue, and it's still unknown if it's a Magisk bug or (high probably) a sort of new anti-root protection by Sammy. I'll check A8 firmware once I get free time
Click to expand...
Click to collapse
ok thanks, can not it be russian firmware? in your opinion if I try another firmware I could solve?
---------- Post added at 12:54 PM ---------- Previous post was at 12:53 PM ----------
mchlbenner said:
Where you able to downgrade to n by using Odin?
Sent from my SM-A730F using xda premium
Click to expand...
Click to collapse
your oem lock it's disappeared?
---------- Post added at 12:55 PM ---------- Previous post was at 12:54 PM ----------
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 12.1 for LG L Fino
THIS ROM IS CURRENTLY BEING COMPILED FOR D290N ONLY! IF YOU FACE ANY PROBLEMS ON A DEVICE OTHER THAN THE D290N DON'T COMPLAIN.
DO NOT INSTALL THIS IF YOU'RE UNAWARE OF WHAT YOU ARE DOING! ANY QUESTIONS LIKE " what's flashing" AND "how to wipe" WILL BE REPORTED SINCE THEY DO NOT CONTRIBUTE TO THE THREAD.
Notice:
This ROM is very WIP. Don't expect it to be a daily user.
Because the ROM is only tested on D290N, only this variant of L Fino is supported by me (since I only have this variant to test on).
Functionality can be broken on other variants.
The ROM theoretically can be installed on:
D290TR
D295
D295F
G2 Lite
Disclaimer:
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/
Click to expand...
Click to collapse
Problems/Bugs:
When in system and connected to a Windows PC via USB. The PC goes to BSOD. (Appears to be caused by LG drivers. Uninstalling them fixes the problem but also stops any ADB access.)
NFC
Some phones have spots on back camera (This is due to them using a different sensor)
Audio not balanced properly
Other small things
People involved:
@proudlytm - Providing his device for testing.
@christpp - Main kernel dev. Everything we have now is because of him. This ROM would not be possible without him.
Me - Fixing bugs and system related code.
@kylevessPL - Creating TWRP
@vm03 - Creating msm8610 kernel
Special thanks:
The CyanogenMod team for creating CyanogenMod
Google for creating Android
LG for creating L Fino
Additional information / resources:
Change logs: see 2nd post of this thread
Google apps: http://opengapps.org/ - Get the nano package!
Download (stable - milestone builds):
Latest build: 18.07.2016 D290N
Older:
18.05.2016 D290N
====
20.03.2016 D290N
====
28.02.2016 D290N
====
19.02.2016 D290N patched
====
17.02.2016 D290N
====
11.02.2016 D290N
====
02.02.2016
====
01.02.2016
How to install:
1) You must have custom recovery installed on your device. I recommend TWRP: http://forum.xda-developers.com/android/development/recovery-twrp-recovery-lg-l-fino-t3308436/
2) Download ROM .zip
3) Download Google apps
4) Put both .zip files on your device (either internal or external storage)
5) Boot your device into recovery mode
6) Make nandroid backup (if needed)
7) Wipe data/factory reset
8) Install the ROM .zip file
9) Install Google apps
10) Reboot
11) Done.
Bug reporting:
https://github.com/geekydoc/android_device_l70pn/issues
1) Visit the above link
2) Click on "New issue"
3) Enter title that explains the problem
4) Explain your problem very clearly with as much details as possible
5) Attach logs and screenshots (if needed)
Don't report a bug if it's already reported.
Don't report a bug if you:
1) have restored apps with Titanium Backup or similar software
2) are using any kind of task killer
3) are using any 3rd party tweak/hack
Name what device you're using: d290 or d295 or l70pn or l70pds
Name CM version you're using: 12.1, 13, 11 etc.
Use proper English, try not to make any spelling errors so I and other people can understand you correctly.
Click to expand...
Click to collapse
Want to help?
If you are a developer you can help us out with debugging and building over at https://github.com/geekydoc/android_device_l70pn
If you are a user you can help us out by telling us about bugs and providing information (Screenshots, logcats)
Screenshots:
Changelogs:
18.07.2016----------------------------------------------------------
Double Tap To Wake fixed.
18.05.2016----------------------------------------------------------
Camera should now be fixed. Small bugs persist but will
be flushed out
Selinux activated again. Should fix storage issues.
20.03.2016----------------------------------------------------------
Fixed rotation sensor.
Fixed magnetic sensor.
Deactivated SELinux for now.
28.02.2016----------------------------------------------------------
Fixed GPS.
21.02.2016-----------------------------------------------------------
Fixed screen flicker, burn-ins and similar problems.
19.02.2016-----------------------------------------------------------
Swapped out GPU driver. Artifacts and weird burn-ins
should be gone.
17.02.2016-----------------------------------------------------------
Fixed battery not being recognized
11.02.2016 -----------------------------------------------------------
Fixed device Power button. It can now be waked.
Fixed RAMDUMP's, the device will no longer enter them.
02.02.2016-----------------------------------------------------------
Fixed softkeys not appearing.
31.1.2016 -------------------------------------------------------------
Initial build.
####---------------------------------------------------------------
i will try it in my 290g
ValenBe said:
i will try it in my 290g
Click to expand...
Click to collapse
so i have install it and it send me to a purple screen. "DBI apps watchdog Reset"
ValenBe said:
so i have install it and it send me to a purple screen. "DBI apps watchdog Reset"
Click to expand...
Click to collapse
Does this happen every time your reboot your phone? Look what @meganukebmp wrote in the description about that problem.
proudlytm said:
Does this happen every time your reboot your phone? Look what @meganukebmp wrote in the description about that problem.
Click to expand...
Click to collapse
yes! i saw it ty, but the buttoms arent showing so when i enter in a app i have to take off my battery
So..The NFC is working? (I won't use it, I'm just curious )
ValenBe said:
yes! i saw it ty, but the buttoms arent showing so when i enter in a app i have to take off my battery
Click to expand...
Click to collapse
That's what I meant. Did it boot after you put your battery back?
I think I made a mistake with pulling out the battery...I was done with the flashing, when the TWRP is freezed...I waited, and waited, and waited. After a while it's been annoying... So I removed the battery.. It said: Boot clarification (I can't remember very well) error+ some texts..
So I have to flash the stock ROM, and reflash the CM
Guys! Do not remove the battery if it's stuck!
LimePanda said:
So..The NFC is working? (I won't use it, I'm just curious )
Click to expand...
Click to collapse
Can't really tell if it's working. I will try the ROM today.
---------- Post added at 09:56 AM ---------- Previous post was at 09:54 AM ----------
LimePanda said:
I think I made a mistake with pulling out the battery...I was done with the flashing, when the TWRP is freezed...I waited, and waited, and waited. After a while it's been annoying... So I removed the battery.. It said: Boot clarification (I can't remember very well) error+ some texts..
So I have to flash the stock ROM, and reflash the CM
Guys! Do not remove the battery if it's stuck!
Click to expand...
Click to collapse
Hmm.. Never experienced TWRP freezing on my phone. Good luck when you're flashing next time though
proudlytm said:
Can't really tell if it's working. I will try the ROM today.
---------- Post added at 09:56 AM ---------- Previous post was at 09:54 AM ----------
Hmm.. Never experienced TWRP freezing on my phone. Good luck when you're flashing next time though
Click to expand...
Click to collapse
Thank you!
---------- Post added at 09:04 AM ---------- Previous post was at 09:01 AM ----------
I think the ROM recognizes my phone as D295, because when I could boot it, it displayed in the settings 2 SIM card slots..Weird..
LimePanda said:
Thank you!
---------- Post added at 09:04 AM ---------- Previous post was at 09:01 AM ----------
I think the ROM recognizes my phone as D295, because when I could boot it, it displayed in the settings 2 SIM card slots..Weird..
Click to expand...
Click to collapse
Weird... So it booted after all? No bootloop?
proudlytm said:
That's what I meant. Did it boot after you put your battery back?
Click to expand...
Click to collapse
Yes, But There was not buttons
proudlytm said:
Weird... So it booted after all? No bootloop?
Click to expand...
Click to collapse
Nothing..It's still stuck at the TWRP...I'm using the TWRP what you recommended (recovery.img, flashify, flash, done)
It think it's the problem...
So..Yeah, no bootloop
ValenBe said:
Yes, But There was not buttons
Click to expand...
Click to collapse
Wait, what did you download? You can clearly see that in the bottom build.prop file the soft keys are enabled.
LimePanda said:
Nothing..It's still stuck at the TWRP...I'm using the TWRP what you recommended (recovery.img, flashify, flash, done)
It think it's the problem...
So..Yeah, no bootloop
Click to expand...
Click to collapse
Uh..Not clarification.*Certification
LimePanda said:
Nothing..It's still stuck at the TWRP...I'm using the TWRP what you recommended (recovery.img, flashify, flash, done)
It think it's the problem...
So..Yeah, no bootloop
Click to expand...
Click to collapse
I will give you aboot and recovery img after 15 minutes (the ones I use)
proudlytm said:
I will give you aboot and recovery img after 15 minutes (the ones I use)
Click to expand...
Click to collapse
It would be good Thank you!
---------- Post added at 09:14 AM ---------- Previous post was at 09:12 AM ----------
LimePanda said:
It would be good Thank you!
Click to expand...
Click to collapse
I think it's my 10th post so I can post links
Just to write something about the ROM:
I really love it..It's very cool.
Yep. I'm not able to boot my phone, but when I was, it was so cool
Thank you guys for your hard work
---------- Post added at 09:15 AM ---------- Previous post was at 09:14 AM ----------
LimePanda said:
It would be good Thank you!
---------- Post added at 09:14 AM ---------- Previous post was at 09:12 AM ----------
I think it's my 10th post so I can post links
Just to write something about the ROM:
I really love it..It's very cool.
Yep. I'm not able to boot my phone, but when I was, it was so cool
Thank you guys for your hard work
Click to expand...
Click to collapse
No it's the 9th
proudlytm said:
Wait, what did you download? You can clearly see that in the bottom build.prop file the soft keys are enabled.
Click to expand...
Click to collapse
Sorry i dont know what are you talking about, but now i have restored a backup. I can tell you what a i saw. The virtual buttons were gonne. When i connected my phone to my PC it did not show. I can reinstall it in like 5 or 6 hours, If you tell me what to do i would like to help
Team Win Recovery Project
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about doing this to your device
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
- I am not responsible about any damage of any kind that this custom binary may cause.
- Please read the whole main post & related ones before proceed and follow the guide as it is wrote. I will not offer support for any issues that have been already stated.
- Your Knox Warranty Bit will be blown once you flash this or others custom binaries, preventing you to use Knox TZ Features. It can't be resetted in any way, so think twice before flashing this.
- Bugs can be reported here in XDA or via our Telegram Group. Please be more clear as possible and make sure you provide detailed info when reporting bugs (device variant and logcat).
- If you like my work please hit the "Thanks" button to support me. You're also free to donate me via my donation link here in XDA.
What is TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, root your device and more.
Read more about TWRP here: https://twrp.me/about/
How to flash and setup it completely?
- First, make sure your phone isn't RMM Locked.
- Download Odin3 v3.13.1, Samsung USB Drivers, latest TWRP's tar for your variant, latest no-verity-opt-encrypt zip and RMM Bypass v3 zip.
- Go to Settings App, Developer Options and enable OEM Unlock (If you don't see Developer Settings, go into About phone>Software info and tap "Build number" 10 times to show Developer Options menu).
- Do a backup of all your important data and files in your phone.
- Shutdown the phone. Once it's off, Power it On in Download Mode (Plug your USB Cable in your phone while pressing Vol + and Vol - buttons together)
- Connect your phone in your PC, open Odin3, go in Option section and untick "Auto-reboot". Once that click the "AP" button and select the TWRP tar you downloaded before, then press the "Start" button.
- Once Odin3 finished to flash the recovery (you should see a "PASS" message), force reboot your phone (Press and hold Power and Vol - buttons together) and once the screen is off, press and hold Power and Vol + buttons together to boot in TWRP.
- Once TWRP is booted you first need to decrypt your /data partition. To do so touch Wipe>Format Data and follow the instructions in screen.
- Once it finished go back at the home screen and touch Reboot>Recovery. TWRP should be able to mount your data partition. Now copy the no-verity-opt-encrypt and RMM Bypass zip you downloaded before and flash them (touch Install and select each zip to flash it)
- You're now able to reboot to your OS without re-encrypting /data partition and without RMM Prenormal lock.
Download:
Galaxy J6/On6 (j6lte):
https://github.com/TwrpBuilder/android_device_samsung_j6ltedx/releases/latest
Sources:
Device Tree: https://github.com/TwrpBuilder/android_device_samsung_j6ltedx
Changelog:
Check Post #2.
Exynos 7870 Community Telegram Group:
Invite Link
Credits:
- Samsung for kernel source code
- TeamWin for their awesome recovery
- @Dyneteve & @surendrajat
XDA:DevDB Information
TWRP for Galaxy J6/On6, Tool/Utility for the Samsung Galaxy J
Contributors
BlackMesa123, Dyneteve
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Current Stable Version: 3.2.3-0
Stable Release Date: 2018-08-02
Created 2018-07-22
Last Updated 2018-08-02
Changelog:
20180802 (3.2.3-0)
- First release
Reserved
BlackMesa123 said:
20180722 (3.2.2-0)
- First release
Click to expand...
Click to collapse
Work for j600f?
AlexVolzsk said:
Work for j600f?
Click to expand...
Click to collapse
Yes.
BlackMesa123 said:
Yes.
Click to expand...
Click to collapse
Thanks. Nice work
How to remove rmm state prenormal?
AlexVolzsk said:
Thanks. Nice work
How to remove rmm state prenormal?
Click to expand...
Click to collapse
Follow the guide linked in OP...
Nice
BlackMesa123 said:
20180722 (3.2.2-0)
- First release
Click to expand...
Click to collapse
now this device can actually be bought... thanks
BlackMesa123 said:
Yes.
Click to expand...
Click to collapse
No. No work for j600f
reboot after the inscription samsung
AlexVolzsk said:
No. No work for j600f
reboot after the inscription samsung
Click to expand...
Click to collapse
Yes i in this i am also face same problem
Users please download new TWRP from the main link in OP, it should work now; also please notice I'm not anymore the maintainer (I don't have enough time to fix mine and didn't want to leave a useless thread) but @Dyneteve and @surendrajat are, and I'm just linking their recovery here to also use this thread as a point of discussion for J6/On6 users. That's all for now, enjoy and buy them a beer if you can!
twrp installed but unable root tried super and magisk both bt not rooting
---------- Post added at 04:08 PM ---------- Previous post was at 04:07 PM ----------
@surendrajat @Dyneteve
twrp installed but unable root tried super and magisk both bt not rooting kindly help
---------- Post added at 04:08 PM ---------- Previous post was at 04:08 PM ----------
@surendrajat @Dyneteve
twrp installed but unable root tried super and magisk both bt not rooting kindly help
raj2k8 said:
twrp installed but unable root tried super and magisk both bt not rooting
---------- Post added at 04:08 PM ---------- Previous post was at 04:07 PM ----------
Click to expand...
Click to collapse
J600f?
Cdcard is mounting?
I shutdown the phone and hold power + volume up + volume down but I'm unable to boot into download mode. The phone just keeps rebooting.
---------- Post added at 05:26 PM ---------- Previous post was at 05:03 PM ----------
Anyone using Lineage GSI on J600G??
spks62178 said:
I shutdown the phone and hold power + volume up + volume down but I'm unable to boot into download mode. The phone just keeps rebooting.
---------- Post added at 05:26 PM ---------- Previous post was at 05:03 PM ----------
Anyone using Lineage GSI on J600G??
Click to expand...
Click to collapse
Hi. You must plug in the USB cable while holding down the volume keys. Then is will go into download mode.
For recovery mode. Hold down volume up then press and hold power. When Samsung J6 logo appears release both buttons
Work in j600g?
Hi,
I can able to root SM-J600G via Magisk.
follow just few steps
first of all backup your data
Enable OEM unlock via developer options
flash twrp recovery & go immediately recovery mode
put these files in external sdcard
1. flash RMM-State_Bypass_Mesa_v2.zip
2. flash no-verity-opt-encrypt-6.0.zip
3. Rest factory via twrp recovery
4. flash Magisk-v17.1(17100).zip
Finally reboot device.
Worked on my galaxy j6 2018 (SM J600g)
Followed the steps as mentioned in the thread and I got twrp installed on my phone in first attempt.
Recovery working fine, no major issues found, and also successfully rooted the phone with magisk 17.
A big thanks to the developer cause I was able to completely remove 180 Samsung bloats from my phone.
Waiting for custom roms for this model, anybody working on it ?
Thread cleaned by OP request.
Please keep your posts on-topic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions :
Make sure you have latest memeui
Boot to recovery
Flash the latest build
Flash fcrypt disabler if you want twrp to boot ( You just need to flash it 1 time since it replaces vendor fstab )
Flash our gapps
Reboot
Downloads :
FCrypt disabler:
AFH
Builds:
Download
Gapps:
Drive
AFH
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
XDA:DevDB Information
[ROM][UNOFFICIAL][violet][9] LineageOS 16.0, ROM for the Xiaomi Redmi Note 7 Pro
Contributors
Dyneteve, merothh
Source Code: https://github.com/Dyneteve/android_kernel_xiaomi_sm6150
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Current Stable Version: 2.0
Created 2019-04-06
Last Updated 2019-05-13
Changelog
Code:
[B]lineage-16.0-20190522-UNOFFICIAL-violet.zip[/B]
Enforcing
Merged latest sm6150 CAF in kernel
FM radio fixed
Offline charging works
Improved notif led
A lot more but too long to
* Note: This will brick old twrp don't forget to flash new one after upgrade
* If you are comming from miui you need new twrp first before attempting to flash
[B]lineage-16.0-20190512-UNOFFICIAL-violet.zip[/B]
Fixed IR blaster
Updated panel fw ( fixes touch delay ) thanks to @TheStricted
[B]lineage-16.0-20190509-UNOFFICIAL-violet.zip[/B]
May sec patch
Kernel side changes ( Lazy to list )
Fixed prefered network
Fixed manual network selection
Fixed notif led
Fixed d2tw
Fixed encryption
New power hal based on qcom's
Maybe more
Note: From now on you must be on stock vendor for any rom to boot ( See new flash instructions to if you want to know how to prevent forcecrypt )
[B]lineage-16.0-20190420-UNOFFICIAL-violet.zip[/B]
Rebased Trees
Offline charging works now (xiaomeme one)
Upstream from LineageOS
[B]lineage-16.0-20190415-UNOFFICIAL-violet.zip[/B]
Updated vendor to V10.2.8.0 ( Don't forget to flash new vendor before los )
Moved back to aosp off charger ( Xiaomi one seems to be broken )
Fixed radio jumping signal bars
Moved to OSS kernel
[B]lineage-16.0-20190409-UNOFFICIAL-violet.zip[/B]
Update to april security patch
Added fm radio
Adjusted rounded corners
Added ota server ( If a new build comes out you can download from ota )
Updated carrierconfig
Enabled volte for all carriers that are not listed in carrierconfig
Fixed sound distortion for some cases
Fixed manual network selection
Fixed any kind of sim manager derpness
More stuff i'm lazy to list
Reserved
Reserved
Reserved
Amazingg!! ????
reserved
:good:
Vatumb said:
:good:
Click to expand...
Click to collapse
Which twrp did you use?
Have you installed LineageOS 16.0, ROM for Xiaomi Redmi Note 7 Pro?
It says the system has been destroyed for me fml. I can go fastboot idk what to do now ;-;
---------- Post added at 10:00 PM ---------- Previous post was at 09:51 PM ----------
I've got your system has been destroyed.
Someone please help
Where do I get the stock firmware? I know I'm in deep waters right now, but I'd really love some help
moriyaprateek said:
It says the system has been destroyed for me fml. I can go fastboot idk what to do now ;-;
---------- Post added at 10:00 PM ---------- Previous post was at 09:51 PM ----------
I've got your system has been destroyed.
Someone please help
Where do I get the stock firmware? I know I'm in deep waters right now, but I'd really love some help
Click to expand...
Click to collapse
I think it's available at xda? Search in the Q&A section
moriyaprateek said:
It says the system has been destroyed for me fml. I can go fastboot idk what to do now ;-;
---------- Post added at 10:00 PM ---------- Previous post was at 09:51 PM ----------
I've got your system has been destroyed.
Someone please help
Where do I get the stock firmware? I know I'm in deep waters right now, but I'd really love some help
Click to expand...
Click to collapse
Did you flash the vbmeta.img file before flashing the ROM?
Here is the link to the fastboot rom: http://bigota.d.miui.com/V10.2.6.0.PFHINXM/miui_VIOLETINGlobal_V10.2.6.0.PFHINXM_740e20a9f5_9.0.zip
---------- Post added at 06:08 ---------- Previous post was at 06:04 ----------
Download vbmeta.img :
You can download it from here : vbmeta.img
And flash it using the fastboot command :
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
I fixed it by flashing the stock ROM. I'll try installing los again soon :|
Which twrp is recommended?
Which twrp is recommended?
No need to flash vbmeta.img
1 . Flash the ROM as mention in op
2 .Just after ROM flashing ,mount system ,vendor and flash magisk through twrp
3 .Then flash this file https://www.androidfilehost.com/?fid=1395089523397934937 in twrp
4 .Reboot
For me this working fine
Sent from my Phh-Treble vanilla using Tapatalk
Any working/Not working list?
Zejsters said:
Any working/Not working list?
Click to expand...
Click to collapse
brightness is a bit low,
Double tap to wake up is broken
Rest is working fine:laugh:
Doomsday101 said:
Did you flash the vbmeta.img file before flashing the ROM?
Here is the link to the fastboot rom: http://bigota.d.miui.com/V10.2.6.0.PFHINXM/miui_VIOLETINGlobal_V10.2.6.0.PFHINXM_740e20a9f5_9.0.zip
---------- Post added at 06:08 ---------- Previous post was at 06:04 ----------
Download vbmeta.img :
You can download it from here : vbmeta.img
And flash it using the fastboot command :
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
balliboxer said:
No need to flash vbmeta.img
1 . Flash the ROM as mention in op
2 .Just after ROM flashing ,mount system ,vendor and flash magisk through twrp
3 .Then flash this file https://www.androidfilehost.com/?fid=1395089523397934937 in twrp
4 .Reboot
For me this working fine
Sent from my Phh-Treble vanilla using Tapatalk
Click to expand...
Click to collapse
Did youflash the los firmware mentioned in this thread?
What I did was flash twrp through fastboot> DM Verity>los firm>los>gapps>magisk and that broke my phone
moriyaprateek said:
Did youflash the los firmware mentioned in this thread?
What I did was flash twrp through fastboot> DM Verity>los firm>los>gapps>magisk and that broke my phone
Click to expand...
Click to collapse
Yes M using los at first attempt got bootlooped but try the other way
Flash twrp > los firm >los > gapps > mount system vendor flash magisk > flash the dmverity flashable zip link given above > booted successfully .
Sent from my Redmi Note 7 Pro using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
INFORMATION:
Pitch Black Recovery was started in March 18 2018 with the movement to enhance TWRP with better customizatons, themes and features. You can read more about PBRP here.
NOTE :
This build of PBRP is based on the kernel source code and no prebuilt kernel was used for building. Because, it is the first build, testers are very welcome for providing feedback regarding the build.
DOWNLOAD :
PBRP-3.3.0.0
BUGS:
You tell me.
INSTRUCTIONS :
Download the recovery image and place it in some folder on your desktop and open the Terminal/Command Prompt/Powershell in the said folder.
Connect your device to the PC and boot into the fastboot mode using H/W keys or by typing :
Code:
adb reboot bootloader
Now, type :
Code:
fastboot flash recovery recovery.img
OR,
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
Download the recovery image from the link.
Reboot to PBRP.
Hit Install and tap the "Images..." button in the lower right
Browse to the location of the PBRP image on your device and select it.
Select recovery from the partition list and swipe to flash.
For folks who are running MIUI (memeui) :
Thanks to Snehashis Sarkar for a short tutorial.
Your data will get wiped before flashing the recovery so take a backup of the internal storage.
Reboot to fastboot.
Wipe the Userdata via fastboot.
Flash this recovery.
Boot into the recovery and format the data (just format it, don't go for the "advanced wipe" section .
Flash this image file: Patched fstab + vbmeta + thermal configs for better performance
Reboot and enjoy.
Kernel Source :
Link: android_kernel_xiaomi_sm6150
XDA:DevDB Information
[RECOVERY][PBRP - 3.3.0-0][Xiaomi Redmi Note 7 PRO], Tool/Utility for the Xiaomi Redmi Note 7 Pro
Contributors
Doomsday101
Source Code: https://github.com/PitchBlackRecoveryProject/manifest_pb
Version Information
Status: Testing
Current Beta Version: 3.3.0-0
Beta Release Date: 2019-05-09
Created 2019-05-08
Last Updated 2019-05-09
Encryption fixed?
This just hangs at the loading image for me, same as your TWRP 3.3.0
I have the Chinese RN7P if it makes any difference.
Dwughjsd said:
Encryption fixed?
Click to expand...
Click to collapse
Please confirm
Bolts Edge said:
Please confirm
Click to expand...
Click to collapse
Been busy in real life recently and bricked my violet before so I would rather wait for others to try
New steps for flashing (just for the MIUI users)
I have updated the forum with extra steps for those who are running the MIUI and try to flash the custom recovery for the first time. This will allow you to run the custom recovery alongside the MIUI so you may give this a go.
Bro please help me, when I was flash recovery img Succesfly flashed but after I am going to recovery mode pbpr screen only showing pls help me
philomin said:
Bro please help me, when I was flash recovery img Succesfly flashed but after I am going to recovery mode pbpr screen only showing pls help me
Click to expand...
Click to collapse
I suppose you must be running miui. I have posted some additional instructions on the forum on how to flash for miui users. You can also make use of this tutorial for reference :
Your Recovery Is Working Fine but why twrp and Pitch black twrp backup restore folder are changed..i should be same but not a problem good job..:good::good:
---------- Post added at 03:31 PM ---------- Previous post was at 03:28 PM ----------
One Question Its a Fully Stable To Work With miui global rom without any encryption.. and with miui incremental updates..
Aj51 said:
Your Recovery Is Working Fine but why twrp and Pitch black twrp backup restore folder are changed..i should be same but not a problem good job..:good::good:
---------- Post added at 03:31 PM ---------- Previous post was at 03:28 PM ----------
One Question Its a Fully Stable To Work With miui global rom without any encryption.. and with miui incremental updates..
Click to expand...
Click to collapse
I haven't tested it myself but I would appreciate it if you or someone else would like to test it out ))
Hello , the recovery works flawlessly , thanks for your work , loving the themes
diamantik said:
Hello , the recovery works flawlessly , thanks for your work , loving the themes
Click to expand...
Click to collapse
doesn't stick on my device. have to flash recovery again and again
I installed it over fresh flash of latest MIUI Global Stable 10.3 fastboot, boots properly and everything is working so far. Will add more details once I test more.
Edit : I installed the MIUI eu rom over this recovery, works good, no hiccups so far. People facing the 'Stuck at Boot Logo' try erasing userdata in fastboot and then flash.
P.S. : I didn't flash the patched vbmeta mentioned by OP but still it's functioning well no problems.
---------- Post added at 06:33 PM ---------- Previous post was at 05:56 PM ----------
antarix said:
doesn't stick on my device. have to flash recovery again and again
Click to expand...
Click to collapse
Working for me, try wiping userdata via fastboot and if possible try flashing over a clean, fastboot flashed MIUI.
Doomsday101 said:
I have updated the forum with extra steps for those who are running the MIUI and try to flash the custom recovery for the first time. This will allow you to run the custom recovery alongside the MIUI so you may give this a go.
Click to expand...
Click to collapse
Others file are not downloading help with download link using latest stable build on my phone
CHETAN9 said:
Others file are not downloading help with download link using latest stable build on my phone
Click to expand...
Click to collapse
Which file do you exactly want?
Naveenthemi said:
Which file do you exactly want?
Click to expand...
Click to collapse
Well all the files other than recovery patched files vbmata for fast performance
CHETAN9 said:
Well all the files other than recovery patched files vbmata for fast performance
Click to expand...
Click to collapse
Recovery u mean?
Naveenthemi said:
Recovery u mean?
Click to expand...
Click to collapse
Recovery downloaded but rest of the files patched fstab+vbmeta+thermal configs for best performance
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
Naveenthemi said:
Recovery u mean?
Click to expand...
Click to collapse
One more thing no need to flash any kind of luckypatcher as I used to do with my redmi note 5 pro earlier
CHETAN9 said:
Recovery downloaded but rest of the files patched fstab+vbmeta+thermal configs for best performance
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
One more thing no need to flash any kind of luckypatcher as I used to do with my redmi note 5 pro earlier
Click to expand...
Click to collapse
https://drive.google.com/file/d/1-2MoGdQMR_jrDpPdIcK8rY0YfZOnwgaR/view?usp=drivesdk
Lucky patcher? What for...
Naveenthemi said:
https://drive.google.com/file/d/1-2MoGdQMR_jrDpPdIcK8rY0YfZOnwgaR/view?usp=drivesdk
Lucky patcher? What for...
Click to expand...
Click to collapse
Thanks for the link actually it is totally different from note 5 pro I used the device earlier
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Bugs
What's working:
Boot
Audio Playback
Camera/Camcorder
DT2W
RIL (LTE/CALL/SMS)
FM Radio
WiFi
Hotspot
Bluetooth
GNSS GPS
NFC (Tested on single sim E8 with PN547 chip, Please let me know if it's working on yours)
USB (ADB)
Sensors
Touch
Hardware Encryption
SELinux is Enforcing
What's not working:
You tell me.
Installation instructions
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash ROM.
Optional: Install the Google Apps addon package.
Supported models:
Single SIM : htc_mecwhl,htc_mectl,htc_mecul,htc_mecul_emea
Dual SIM : htc_mecdug,htc_mecdugl,htc_mecdwg,htc_mecdwgl
Downloads
Recovery : Unofficial E8 TWRP (Support decryption, MTP: broken)
Gapps : Open Gapps Arm 10.0
Rom :
Single SIM Variants
Dual SIM Variants
Sources
Device Trees
Kernel Trees
Vendor Trees
Donate
DONATE To Me
Big Thanks
LineageOS Team.
@RavnPW for his contribution on E8 sources, especially vendor blobs and kernel change.
All M8/MSM8974 contributors.
I don't have this device, just build it with my latest changes for E8 users
Changelogs
2020/09/14
Updated with September security patches.
Upstream updates and fixes.
2020/08/08
Updated to Android 10.0.0_r41 with August security patches.
Upstream updates and fixes.
Optimized adaptive brightness.
Added MEMCG kernel patches, switched to LMKD for better performances.
Fixed NFC for more variants (htc_mecul_emea, htc_mecdwgl)
2020/07/13
Updated to Android 10.0.0_r40 with July security patches.
Upstream updates and fixes.
Removed bootloader version restrictions.
Removed IR Blaster HAL, as we don't have the hardware support.
2020/07/13
TWRP 3.4.0-0 released for E8 all variants, Please test it and let me know.
2020/07/10
Initial LOS17 build for E8/E8D.
With Android 10.0.0_r37 with June security patches.
With latest MSM8974 LOS kernel changes.
With SELinux Enforcing.
With USB Trust HAL.
NFC works on single sim variant with pn547, should also works for dual sim variant with pn544.
Screenshots
here!
my htc e8 model in bootloader is ... MEC_UL_EMEA (M8SN)singel sim
whay error installing lineg os 14 / 15 / 16 / 17 ????? error say E3004: this pakage is for device: htc_e8.htc_mecwhl. htc_mectl htc mecul_emea: this device is . updater process ended with error: 7
tom7647 said:
my htc e8 model in bootloader is ... MEC_UL_EMEA (M8SN)singel sim
whay error installing lineg os 14 / 15 / 16 / 17 ????? error say E3004: this pakage is for device: htc_e8.htc_mecwhl. htc_mectl htc mecul_emea: this device is . updater process ended with error: 7
Click to expand...
Click to collapse
Send me your recovery.log after trying to flash the ROM, also use adb from TWRP to type the command:
Code:
adb shell
Code:
getprop | grep mid
and what's your TWRP version?
is the latest M8 official TWRP from my link above?
tarkzim said:
Send me your recovery.log after trying to flash the ROM, also use adb from TWRP to type the command:
Code:
adb shell
Code:
getprop | grep mid
and what's your TWRP version?
is the latest M8 official TWRP from my link above?
Click to expand...
Click to collapse
my twrp version 3.1.0.0 and my device just running this version //after install twrp-3.4.0-1-m8.img .device not run in to recovery and jump to bootloader
tom7647 said:
my twrp version 3.1.0.0 and my device just running this version //after install twrp-3.4.0-1-m8.img .device not run in to recovery and jump to bootloader
Click to expand...
Click to collapse
Then just try with your previous working TWRP and commands above to get info for me.
TWRP decryption support
Alright, guys
As far as i know the M8 version of TWRP are not working for this device, so i decided to build an unofficial TWRP for E8,
HERE
Please try it to flash the ROM and let me know if decryption and MTP is working, thanks!
taking too long to clear the cache, system, but the installation is fast, boot fast and ROM runs smoothly
SWEVEX said:
taking too long to clear the cache, system, but the installation is fast, boot fast and ROM runs smoothly
Click to expand...
Click to collapse
Is dual sim working for you?
And just curious, what's your variant?
tarkzim said:
Is dual sim working for you?
And just curious, what's your variant?
Click to expand...
Click to collapse
I only use 1 Sim, my phone model m8sd, but after restarting my microsd corrupted
new build released
Updated to Android 10.0.0_r40 with July security patches.
Upstream updates and fixes.
Removed bootloader version restrictions.
Removed IR Blaster HAL, as we don't have the hardware support.
@tom7647 please test it.
SWEVEX said:
I only use 1 Sim, my phone model m8sd, but after restarting my microsd corrupted
Click to expand...
Click to collapse
Not sure about the SD card problem, what's the filesystem format of your card?
BTW, is NFC working for your phone?
tarkzim said:
Updated to Android 10.0.0_r40 with July security patches.
Upstream updates and fixes.
Removed bootloader version restrictions.
Removed IR Blaster HAL, as we don't have the hardware support.
@tom7647 please test it.
Click to expand...
Click to collapse
yessssssssss instally magic e8
you are my hero thanks for every think:good:
tom7647 said:
yessssssssss instally magic e8
you are my hero thanks for every think:good:
Click to expand...
Click to collapse
Don't forget to test nfc features and let me know if it's working, if not please grab logs and send me your stock rom backup would be great.
HTML:
tom7647 said:
yessssssssss instally magic e8
you are my hero thanks for every think:good:
Click to expand...
Click to collapse
install in recovery successful reboot and install step 2 successful .but stay in htc logo
when its on htc''s logo i had call from my friend and my phone was ringing !!!
when click power bottom. i listen lock sound!!!
also on htc's logo didn't continue ..............
tom7647 said:
HTML:
install in recovery successful reboot and install step 2 successful .but stay in htc logo
when its on htc''s logo i had call from my friend and my phone was ringing !!!
when click power bottom. i listen lock sound!!!
also on htc's logo didn't continue ..............
Click to expand...
Click to collapse
Send me your last_kmsg after reboot to twrp, Google it for tutorial.
Edit: Also, have you ever update your stock rom to latest firmware like 6.0.1? Before flashing custom roms.
tarkzim said:
Send me your last_kmsg after reboot to twrp, Google it for tutorial.
Edit: Also, have you ever update your stock rom to latest firmware like 6.0.1? Before flashing custom roms.
Click to expand...
Click to collapse
yes i had marshmallow firmware before flashing custom rom . try install 0PAJIMG_M8_ACE_UL_L50_SENSE60_EMEA_MR_HTC_Europe_2.34.401.5_Radio_1.23.30336021.10G_30.69.336021.00_F_release_431395_signed// maybe install:good:
---------- Post added at 07:45 PM ---------- Previous post was at 07:39 PM ----------
it is my problem you are great :highfive:
tom7647 said:
yes i had marshmallow firmware before flashing custom rom . try install 0PAJIMG_M8_ACE_UL_L50_SENSE60_EMEA_MR_HTC_Europe_2.34.401.5_Radio_1.23.30336021.10G_30.69.336021.00_F_release_431395_signed// maybe install:good:
---------- Post added at 07:45 PM ---------- Previous post was at 07:39 PM ----------
it is my problem you are great :highfive:
Click to expand...
Click to collapse
above rom installed with flash man software.. in flash man i know my device refurbished !! after flashing rom . my device bootloader 3.18 change to 3.19 / all of my problem for this.3.18
now your rom and every rom can install / your rom is the best for every user / nfc not working but not important for me
you are great person you are best:highfive:
Great work
Just installed the rom on e8d, it's running smoothly. Great work. Thanks