Database Info

[13/06/2020] Haky86's LineageOS 14.1 Huawei P8 Lite 2017 PRA-LX1

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage OS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]P8 Lite 2017.
[*]P10 Lite.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Emui 5.x B115 (Single Sim) or B170(Dual Sim)
How to Install the ROM?
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
Gapps:
http://opengapps.org
Working Hardware:
Audio.
Bluetooth.
Browser.
Display.
GPS.
Graphics: only gralloc.
Lights.
RIL.
Sensors.
Storage: both internal & external storage.
Wifi.
Bugs:
Tell me
LineageOS 14.1:
Downloads:
Checkout this
LineageOS 14.1 Downloads
Changelogs:
30/07/2017:
Initial build.
03/08/2017:
Testing hwcomposer, report us if the build boot and run games fine.
Camera will be fixed soon.
21/08/2017:
fix random reboot.
fix some tethering issues.
wifi should be fixed (send me a logcat if not work) it was working on my own pra-lx1..
25/08/2017:
fix sim.
fix hwcomposer (in theory, you should test games for that).
fix wifi..
01/09/2017:
ril has beeb fixed by disable flags for dual sim, my device is single sim.
fix wifi (will try to fix saving password issue).
01/09/2017:
Android 7.1.2 R29.
fix bootloop.
fix random reboot.
to fix lags: disable Ambient Display from Display settings.
15/11/2017:
update HwComposer according to this patch.
Update permissions for Google Play.
Build is smooth and fast even with enabled ambient display
21/12/2017:
fix minor bugs
31/12/2017:
fix camera
06/01/2018:
fix USB & memories.
21/01/2018:
Fix error 7 by adding support for prague devices, so you must flash my latest twrp, the v2.5.
Fix ril on prague devices.
Fix ril crashes, I test the automated voice of ussd code for more than 30 seconds and didn't crash like before.
Note: this rom is only for the Huawei P8 Lite 2017 if you didn't get worked audio or camera on your hi6250 device isn't my fault, just flash my own vendor.img from unbrick guide, that's why I get everything works on my pra-lx1 like the following attached screenshot.
25/01/2018:
Fix audio for P10 Lite
Add support for Vulkan libraries for all hi6250.
Fix camera on some prague devices.
31/01/2018:
Fix Magisk 15.3
Security patches: January 2018
19/02/2018:
security patches: Feb 2018
02/05/2018:
fix call's sensor issue.
latest android 7.1.2 build.
28/12/2019:
Fix Magisk
Fix RIL crash.
Security Patches: 5 Dec 2019
11/06/2020:
New "Extra" thanks to dady8889 for the base (I'll clean up tomorrow)
Fix Mute in Call.
SPL: May 2020
13/06/2020:
Fix Mute in Call.
Fix USSD. (thanks to flex1911 for his emui8 fixes)
Fix RIL Crash again.
[/HIDE]
Source Code:
Device Tree:
https://github.com/hak86/android_device_huawei_hi6250
Kernel GPL:
https://github.com/hak86/android_kernel_huawei_prague
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
Credits
@haky 86
@Meticulus special thanks for immense work done in just few days for the hi6250 platform.
Contributors
@haky 86
Source Code: https://github.com/hak86
ROM Kernel: Linux 4.1.x
ROM Firmware Required: EMUI 5.0 or newer
Version Information
Status: Beta
Beta Release Date: 2017-07-30
Created 2017-07-30
Last Updated 2017-12-21

Reserved
ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

Oh, finally you did it
You can easy fix deep-sleep issue if you'll apply @XePeleato' patch for surfaceflinger , please take a look here , credit goes to @XePeleato !
Second, you can also easly fix the "reboot to erecovery" issue, by applaying my patch for kernel, you should take a look here as well !
I assume Hotspot isn't working, because you need more patches to kernel ... so you can cherry-pick almost all my commits, but as always you should keep authorship, as much as possible
About camera ?? - you can't enable camera so easy ... I'll let you to try , and if you do not succeed in a week, please let me to know and I'll help you
Good luck !

surdu_petru said:
Oh, finally you did it
You can easy fix deep-sleep issue if you'll apply @XePeleato' patch for surfaceflinger , please take a look here , credit goes to @XePeleato !
Second, you can also easly fix the "reboot to erecovery" issue, by applaying my patch for kernel, you should take a look here as well !
I assume Hotspot isn't working, because you need more patches to kernel ... so you can cherry-pick almost all my commits, but as always you should keep authorship, as much as possible
About camera ?? - you can't enable camera so easy ... I'll let you to try , and if you do not succeed in a week, please let me to know and I'll help you
Good luck !
Click to expand...
Click to collapse
Sure bro
I'm make a build right now with that patch, for camera I don't see USE_CAMERA_STUB := true in BoardConfig.mk and also my kernel source has 34 repos for external, are they useful? will do a test with them and report you..the rest are perfect

Installed, testing. No reboots so far.

Dejan Kruljac said:
Installed, testing. No reboots so far.
Click to expand...
Click to collapse
just wait and see..fixing are in progress..will be in nex builds. btw

This works on the P9 Lite 2017 too. The devices have the same hardware, I think even the same Model No. Just wanted to point that out.

Hi,
We have a P8 Lite 2017 and i have install LineageOS...
I have different problem.
The first problem is no sim accept. ( i have two sim in the phone but the Software marked "No sim"...
The second problem is when i shutdown P8 and stard after few minutes, the P8 doesnt start ( P8 blocked on the Logo Lineage OS).
You can help me ??
Thanks

maxilib said:
Hi,
We have a P8 Lite 2017 and i have install LineageOS...
I have different problem.
The first problem is no sim accept. ( i have two sim in the phone but the Software marked "No sim"...
The second problem is when i shutdown P8 and stard after few minutes, the P8 doesnt start ( P8 blocked on the Logo Lineage OS).
You can help me ??
Thanks
Click to expand...
Click to collapse
For sim I can't help you because my device is single sim.
for shutdown/random reboot, I already fix that problem, will be available in the second builld once fix nfc

haky 86 said:
For sim I can't help you because my device is single sim.
for shutdown/random reboot, I already fix that problem, will be available in the second builld once fix nfc
Click to expand...
Click to collapse
Thanks for your reply
I'v tested you version later. But for the SIM, any SIM is recognize in the system ! ( French SIM operator Orange)

I flashed the vendor, did a factory reset in twrp and wiped system, flashed rom zip and opengapps arm64 7.1 pico. it looped on a Lineage logo for 10 minutes. Do i need to format data partition? or factory reset is enough

aciupapa said:
I flashed the vendor, did a factory reset in twrp and wiped system, flashed rom zip and opengapps arm64 7.1 pico. it looped on a Lineage logo for 10 minutes. Do i need to format data partition? or factory reset is enough
Click to expand...
Click to collapse
Data needs to be wiped too everytime you flash a completely new ROM

Vinnipinni said:
Data needs to be wiped too everytime you flash a completely new ROM
Click to expand...
Click to collapse
so, factory reset from twrp is not enough and i need to choose "format data", the option above twrp slider yep?

aciupapa said:
so, factory reset from twrp is not enough and i need to choose "format data", the option above twrp slider yep?
Click to expand...
Click to collapse
Yes.

Vinnipinni said:
Yes.
Click to expand...
Click to collapse
OK, thanks. I'll back everything up and wait for next build

aciupapa said:
OK, thanks. I'll back everything up and wait for next build
Click to expand...
Click to collapse
Yeah. Just keep in mind that you cannot backup data at all. Only the Internal space with your PC. But always make backups of other stuff and keep at least one on your PC, so if something breaks, you can always go back. Data isn't that important to safe, if you wiped data, it's like a factory reset.

Please read the OP, of course you'll need to wipe data, cache, system.

haky 86 said:
Please read the OP, of course you'll need to wipe data, cache, system.
Click to expand...
Click to collapse
did that. still hangs on lineage bootanimation, waited for 10 mins or so

I don't quite understand how to patch the surfaceflinger. Can someone tell me what am I supposed to do?

First my respect. I also tried it. But I failed. Is not bad, there are experts like @haky 86. Great work, thank you.
When I tested the version for the 6x in the morning, I had to format between the data partition and re-install the EMUI. Since then your TWRP works perfectly. Complete backups include Data Partition. Restoring is also perfect. Tomorrow I want to try your Lineage OS. Hope the Revovery works there perfectly synonymous.

[ROM][7.1.2][FINAL] CodeOfHonor's OmniROM 7.1 for Huawei P8 Lite 2017

OmniROM is our Android custom ROM variant, feature-packed but always with stability as #1 priority in mind.
Based on the Android Open Source Project (AOSP) and enriched by our developers with lots of custom enhancements, OmniROM has set out to give you a great Android experience on your mobile.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]P8 Lite 2017.
[*]P9 Lite 2017.
[*]P10 Lite.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP, flash my latest build to avoid error 7 from here.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
tell me.
Downloads:
Code:
[B][I]**21/05/2018**[/I][/B]
[LIST]
[*][URL="https://www.haky86.com/2018/05/21/omnirom-nougat-hi6250/"]From Haky's Blog[/URL]
[/LIST]
Changelogs:
Code:
[B][I]**21/05/2018**[/I][/B]
[LIST]
[*]re-works
[/LIST]
Source Code:
Device Tree:
https://github.com/hak86/android_device_huawei_hi6250
Kernel GPL:
https://github.com/hak86/android_kernel_huawei_prague
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
OmniROM for PRA-LX1, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, Meticulus
Source Code: https://github.com/hak86?tab=repositories
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 5.x "C432B161"
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-01-17
Created 2018-01-17
Last Updated 2018-01-17

ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

*reserved v2*

Download Link is not working
Edit: There is a " in the end of the link that shouldn't be there.. Maybe you should edit the link

Zillinda said:
Download Link is not working
Edit: There is a " in the end of the link that shouldn't be there.. Maybe you should edit the link
Click to expand...
Click to collapse
fixed

I have a totally weird issue on this ROM. I don't have this issue on any of your ROMs except this one.
When i use your vendor my SIM Card is not detected (even if i disable Dual Sim and reboot)
But the weird thing is, when i flash my stock vendor from P10 Lite the Sim is working BUT the sound is not working.
I flashed this one like every ROM from you, and every ROM worked but not this one :/
Are you using the latest Code of Meticulus? Because i had this issues with earlier builds of Meticulus' ROMs
Except that everything works fine. I will go back to your fully working SlimROM until you release AOSPExtended.

Zillinda said:
I have a totally weird issue on this ROM. I don't have this issue on any of your ROMs except this one.
When i use your vendor my SIM Card is not detected (even if i disable Dual Sim and reboot)
But the weird thing is, when i flash my stock vendor from P10 Lite the Sim is working BUT the sound is not working.
I flashed this one like every ROM from you, and every ROM worked but not this one :/
Are you using the latest Code of Meticulus? Because i had this issues with earlier builds of Meticulus' ROMs
Except that everything works fine. I will go back to your fully working SlimROM until you release AOSPExtended.
Click to expand...
Click to collapse
In your case you must edit the /vendor/phone.prop file
* search for [0X3B412000]
* and make sure to set the following string.
persist.radio.multisim.config=single
persist.dsds.enabled=false
* save and reboot.
you get this problem because my vendor.img is designed to run with single sim devices only.
AOSPE will be available after AOSPA Paranoid, isn't available on any hi6250 device as I see.
Edit: remove persist.radio.multisim.config=single, save and reboot.

haky 86 said:
In your case you must edit the /vendor/phone.prop file
* search for [0X3B412000]
* and make sure to set the following string.
persist.radio.multisim.config=single
persist.dsds.enabled=false
* save and reboot.
you get this problem because my vendor.img is designed to run with single sim devices only.
AOSPE will be available after AOSPA Paranoid, isn't available on any hi6250 device as I see.
Edit: remove persist.radio.multisim.config=single, save and reboot.
Click to expand...
Click to collapse
Thanks, i will try it now.
But why don't i have this issue with your other ROMs?

Zillinda said:
Thanks, i will try it now.
But why don't i have this issue with your other ROMs?
Click to expand...
Click to collapse
it's releated to vendor.img partition since it's designed to run on single sim.. just fix the flags I wrote and will get fixed.
a thing you should do manually on dual sim phones.

haky 86 said:
it's releated to vendor.img partition since it's designed to run on single sim.. just fix the flags I wrote and will get fixed.
a thing you should do manually on dual sim phones.
Click to expand...
Click to collapse
I get error, that it's Read-Only File system and if i want to change the permission of the file with Root Browser it says Changing permissions was not successful. Both the Editor and the Root Browser have root permissions.
Edit: i see the file is symlinked to /hwvendor/phone.prop so i edited it inside there but it's still not working

Zillinda said:
I get error, that it's Read-Only File system and if i want to change the permission of the file with Root Browser it says Changing permissions was not successful. Both the Editor and the Root Browser have root permissions.
Edit: i see the file is symlinked to /hwvendor/phone.prop so i edited it inside there but it's still not working
Click to expand...
Click to collapse
set via adb shell and tell us if fixed
setprop persist.radio.multisim.config single
setprop persist.dsds.enabled false

haky 86 said:
set via adb shell and tell us if fixed
setprop persist.radio.multisim.config single
setprop persist.dsds.enabled false
Click to expand...
Click to collapse
nope, i don't know if i am too stupid or if it's really not working, but none of this methodes is working.

Zillinda said:
nope, i don't know if i am too stupid or if it's really not working, but none of this methodes is working.
Click to expand...
Click to collapse
well, as you see it's working for me in screenshots.

I finally got it working by replacing the /hwvendor/phone.prop file from my STOCK vendor into the vendor of @haky 86.

@haky 86
Intalled the C432B161 firmware, then proceed to flash this rom with your instructions, everything works except video recording on camera, also for whatsapp, facebook, messenger, etc
Any hints ? Maybe I missed something

rubentkato77 said:
@haky 86
Intalled the C432B161 firmware, then proceed to flash this rom with your instructions, everything works except video recording on camera, also for whatsapp, facebook, messenger, etc
Any hints ? Maybe I missed something
Click to expand...
Click to collapse
Enable Google H264 in Settings -> Extra
Sent from my hi6250 using XDA Labs

Zillinda said:
Enable Google H264 in Settings -> Extra
Sent from my hi6250 using XDA Labs
Click to expand...
Click to collapse
Already did that and reboot the phone, but the problem persist.
[/ATTACH]

rubentkato77 said:
Already did that and reboot the phone, but the problem persist.
[/ATTACH]
Click to expand...
Click to collapse
what is your device?also did you flash my vendor partition?

haky 86 said:
what is your device?also did you flash my vendor partition?
Click to expand...
Click to collapse
I bought it as P9 Lite 2017 PRA-LX3C69B110 branded from Telcel Mexico, then converted PRA-LX1C432B110 dual sim unbranded and got updated to B170.
Then unlock bootloader, instal your latest TWRP, follow your unbrick guide fro C432B161.
Then flash omni ROM + pico gapps.
In some point I didn flash your vendor img (how did I miss that !#@$!) do I needto flash it again before omni rom or after?
Regards. :good:

rubentkato77 said:
I bought it as P9 Lite 2017 PRA-LX3C69B110 branded from Telcel Mexico, then converted PRA-LX1C432B110 dual sim unbranded and got updated to B170.
Then unlock bootloader, instal your latest TWRP, follow your unbrick guide fro C432B161.
Then flash omni ROM + pico gapps.
In some point I didn flash your vendor img (how did I miss that !#@$!) do I needto flash it again before omni rom or after?
Regards. :good:
Click to expand...
Click to collapse
well yes, you have to flash my own vendor from unbrick guide!
but before doing that pull /vendor/phone.prop from converted firmware and paste into system/vendor/ to avoid sim problems.
as you see my screenshot the camera is fully works without enable google codecs.

[ROM][7.1.2][12/05/2018] CodeOfHonor's AOSPA Paranoid v7.3.1 for Huawei P8 Lite 2017

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, Meticulus
Source Code: https://github.com/hak86/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-02-09
Created 2018-02-09
Last Updated 2018-02-08

ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

Thank you for your awesome work! AOSPA is my fking favorite ROM.

NetfariousIntent said:
Thank you for your awesome work! AOSPA is my fking favorite ROM.
Click to expand...
Click to collapse
glad to hear that
I'll post in p9 lite and honor 6x sections later
here a screenshot of my friend that run on his p10lite and have almost 19%..

it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all

karasoulas said:
it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all
Click to expand...
Click to collapse
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP

haky 86 said:
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
Click to expand...
Click to collapse
yup. works. i dont know why man. but the stock rom is faaaaar faster than ur roms. Not trying to be rude i love ur work but i dont know. maybe iim doing something wrong?

** Note **
**11/02/2018**
pa_hi6250-7.3.1-EOL-20180210.zip
Changelogs:
**11/02/2018**
possible fix for ril crashes

Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?

atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated

sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/

atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
NetfariousIntent said:
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/
Click to expand...
Click to collapse
I use pico, always.

Sim keep disconnecting itself

It gives error while saving the finger print, both in this and the slim rom

atsmurat said:
It gives error while saving the finger print, both in this and the slim rom
Click to expand...
Click to collapse
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back

CarlosAG10 said:
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back
Click to expand...
Click to collapse
İ didnt erase fingerprints in Omni ROM . From that ?
Where is Elite Rom ?

haky 86 said:
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
I use pico, always.
Click to expand...
Click to collapse
Noto solve the SIM from disconnecting itself

Wire1122 said:
Noto solve the SIM from disconnecting itself
Click to expand...
Click to collapse
I will do a test-build post dinner, I fix the problems around here a few weeks ago on some roms!

Have You found the bug? I really want use your rom for Daily use.

** Note **
**13/02/2018**
pa_hi6250-7.3.1-EOL-20180213.zip
**13/02/2018**
Fix RIL crashes.
How to fix RIL Crashes?
Follow this post

[ROM] [UNOFFICIAL] LineageOS 13 |ASUS Memo Pad HD 7 (me173x) [MT8125]

Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.​
How to Install:
1- BACKUP, BACKUP, BACKUP, All will be WIPED!
2 - Unlock bootloader instructions here
3 - Flash the new mandatory TWRP Recovery
4 - Move Rom & Gapps (optional) into device storage
5 - Full Wipes
6- Flash Rom & Gapps (gapps are OPTIONAL)
for GAPPS:
Choose Gapps Package "ARM" > "6.0" > "Pico" or "Nano" visit OpenGAPPS
Working:
Boots
Storages
Bluetooth
Wifi
GPS - GNSS
Audio
Charging
Offline Charging
Video decoding/ Playback (i.e.: Youtube) up to 720p
android marshmallow new features: Adoptable Storage / Multi Window / etc
DRM Widevine : For Netflix, Amazon Prime, etc
Sensor: magnetometer: akm8963
Front Camera: mt9m114_mipi_raw
Front camera: GC0339_RAW
etc ....
NOT Working:
Rear Camera: a5142_mipi_raw
Front Camera: GC0339_RAW (ME173X 8GB) Fixed on build 20220629
Sensors: accelerometer (autorotation)
You tell me
Special Thanks
OMNI Rom
LineageOS
DerTeufel1980 & fire855 ( my Team mates from M.A.D)
GPL Compliance:
GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
ASUS ME173x device for LineageOS 12.1 & LineageOS 13 - GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
github.com
GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1
ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1 - GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / ...
github.com
--> "asus_mm" branchs

FAQ
Small FAQ:
Q: How can i Unlock the Bootloader?
A: Instructions for Unlocking the Bootloader can be found here
Q: After locking the screen, the screen is all black, and/or flickering and I'm forced to reboot, how can I fix this?
A: If you have this issue, then your device uses the second screen/lcm hardware revision
( the lgld070wx3_dsi_vdo ), please use the second kernel.zip for this variant, it'll be added an second kernel . zip for people with this variant, on the download section with the ROM release
Q: how to flash this second kernel for the new hardware variant ?
A: After flashing the ROM, flash the second kernel afterwards
Q: Where are the Developer Options?
A: Go to Settings>About Tablet, and tap 7 times on the Build Number
Q: Where is the multi-window mode?
A: in the developer options, you can enable it there
Q: How can i root this rom?
A: you can use Magisk , or SuperSU
Magisk: v.23
SuperSu v2.82
note: Magisk builds v24.x and v25.x do NOT work.
Q: Do i really need to update recovery?
A: YES
Q: I can't flash this Rom on recovery, why?
A: You need to update your recovery to TWRP
Q: how to work with twrp?
A: in the first time TWRP boots, it'll ask if you want to allow modifications, slide to YES
Q: how to wipe and flash in twrp?
A: Go "mount" and mount "system"
then go "wipe" > and wipe dalvik / cache / data / System
Q: How can i flash the new recovery?
A: If you already have an custom recovery installed:
Download the new TWRP recovery zip
flash the new recovery
reboot to recovery again, TWRP should be now installed
If you don't have any custom recovery installed:
- You can extract the "recovery.img" from the .zip
- Open an terminal
- Boot to fastboot mode, and type:
Code:
fastboot flash recovery recovery.img
then reboot:
Code:
fastboot reboot
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me a beer
..

Changelogs
Build 20201221
First Release
Build 20210821
Kernel:
DCT / Power resolve more issues
LCM: nt35521_dsi_vdo: Add backlight enable ctrl function
Fix magnetometer sensor: akm8963
Battery: Corrections
Camera LENS AF (for the rear camera) fixed
Front Camera : mt9m114_mipi_raw ( ME173X 16GB Version) fixed
mmc: more handling fixs
msdc: more fixs
Touch Panel: GT927: Implement a proper suspend & resume
Some other small fixs.
LineageOS source and device:
LineageOS LiveWallpapers, Wallpapers are now included ( as per-user requests)
Gello browser removed, it's depricated and has security risks
Disable Live Display by default (not supported by this device)
Some device clean up
Fix some eGL crashs
Fix some core missing symbols
Added Front camera support ( Pictures )
Some other small fixs.
Build 20220629
Kernel:
Security: Fix the following security issues:
PG SU daemon security fix
CVE-2017-1000365
CVE-2017-2618
CVE-2017-2671
CVE-2016-10208
CVE-2016-10208
CVE-2013-4312
CVE-2016-2550
CVE-2017-9074
CVE-2017-9075
CVE-2017-9076
CVE-2017-9077
CVE-2017-9242
LVT-2017-0002
CVE-2012-6703
CVE-2015-8944
CVE-2016-3857
CVE-2016-9555
CVE-2017-8890
ARM: spectre-v1
ARM: spectre-v2
ARM: Merge some bug fixs
imgsensors:
mt9m114_mipi_raw: Enable NightMode & Improve NightMode handling (better handling of Low light pictures)
gc0339_raw support added (CMOS front camera used in some HW revisions)
Memory management / Others:
Merge ZRAM from Kernel 3.10 version, and backport K 3.10 ZRAM fixs
Merge zsmalloc from Kernel 3.10 version, and backport K 3.10 ZRAM fixs
Add support for LZ4 decompression in the Linux Kernel
Other minor fixs
LineageOS source and device:
device: Added 512 MB Virtual SWAP Memory
Fix GPU PowerVR blobs crash, leading to random reboots & wakeup reboots
Disable OpenGL preloading with PowerVR drivers
SHIM: Add UI shim lib to fix some other random crashs
Remove max app limit
ART: Increase and fine tune the heap limit
Camera & nvram blobs fixs
Other minor fixs
Build 20220718
Fixed Bluetooth, that got broken by mistaque on 20220629 release
Downloads
TWRP 3.1.1
TWRP_3.1.1_ME173X.zip | by superdragonpt for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Build 20220718
https://androidfilehost.com/?fid=15664248565197191338If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20220718
https://androidfilehost.com/?fid=15664248565197191342
Old Builds
Build 20220629
https://www.androidfilehost.com/?fid=15664248565197184858If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20220629
https://www.androidfilehost.com/?fid=15664248565197184860
Build 20201221
lineage-13.0-20201221-UNOFFICIAL-me173x.zip | by superdragonpt for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
If you have the second hardware Screen revision (check FAQ), flash this
kernel for the Build 20201221
Kernel_rev2_Build_20201221.zip | by superdragonpt for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Build 20210821
https://www.androidfilehost.com/?fid=7161016148664790672If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20210821
https://www.androidfilehost.com/?fid=7161016148664790675

Man, you're awesome
But I have issue with wifi. Cant turn it on and my mac adress is 02:00:00:00:00
Bluetooth also not working

gadom92 said:
Man, you're awesome
But I have issue with wifi. Cant turn it on and my mac adress is 02:00:00:00:00
Click to expand...
Click to collapse
Same here

Awesome work, thx and merry xmas

gadom92 said:
Man, you're awesome
But I have issue with wifi. Cant turn it on and my mac adress is 02:00:00:00:00
Bluetooth also not working
Click to expand...
Click to collapse
This seems to be the very same issue some users had with Lineage 12.1...
can** replicate this on my units.
EDIT: i meant, can't replicate this
please try this:
[ROM] [UNOFFICIAL] LineageOS 12.1 |ASUS Memo Pad HD 7 (me173x) [MT8125]
Disclaimer: LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if...
forum.xda-developers.com
Settings > Backup & reset

superdragonpt said:
This seems to be the very same issue some users had with Lineage 12.1...
can replicate this on my units.
please try this:
[ROM] [UNOFFICIAL] LineageOS 12.1 |ASUS Memo Pad HD 7 (me173x) [MT8125]
Disclaimer: LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if...
forum.xda-developers.com
Settings > Backup & reset
Click to expand...
Click to collapse
Did not solve the problem so far. Wifi is even broken after restoring the los 12.1 backup which worked before
Edit: uploaded logcat

Ok, i reflashed the old carliv recovery via fastboot after installing Los13 and i got wifi back ...
And afterwards i flashed twrp again via fastboot and wifi is still working...
Previously i flashed the twrp zip from carliv, i guess this was part of the problem

reflashing recoveries in fastboot not worked for me :/

I also wiped everything including internal storage before, and bootet into each of the two recoveries and to the system from there.
Maybe the carliv recovery changes some things on the system, idk.

Hi, I am so glad that this is still alive project
I upgraded recovery via mtk flesher. Just rename twrp 3.1.1... into recover.img and click "download".
My wifi and bluetooth are working. Sometimes bluetooth have conflict with wifi and plain reboot fix things.
It is strange that not a single one sensor work(acceleration and gravity, magnetic field, orientation and rotation. They all worked in 12.1 beside rotation. Hope thing are going to get fixed up.
Had a few freezes also(hard reset do the job)
Overall I have a feeling that this is smoother than 12.1.
EDIT: It was misleading about recovery flash. You need to extract from twrp_3.1.1_ME173X.zip "recovery.img" and replace in folder where scatter file with old "recovery.image" is.

Gronkdalonka said:
I also wiped everything including internal storage before, and bootet into each of the two recoveries and to the system from there.
Maybe the carliv recovery changes some things on the system, idk.
Click to expand...
Click to collapse
interesting... likely the wiping of internal storage fixed it..
if anyone is having this issue, please try and report back if the following fixs:
in twrp:
Flash this test kernel
AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
cheers
Merry Xmas

superdragonpt said:
interesting... likely the wiping of internal storage fixed it..
if anyone is having this issue, please try and report back if the following fixs:
in twrp:
Flash this test kernel
AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
cheers
Merry Xmas
Click to expand...
Click to collapse
not working :/
edit: Flashed old recovery trough Flash Tool, than TWRP in Flash tool wipe all what i can and then install LOS 13. Wifi working like a charm

Any chance you can help with source patches?

First of all thanks to snapdragon for the new LOS13 support.
I'm sorry to tell you that all of your mentioned ways to get WiFi back to work did not work for me. What I did and what I tried:
Normal installation way:
Flashed new recovery via old custom recovery
complete wipe
flashed new LOS13 via new TWRP recovery
WiFi not working!
Going back to old custom recovery and back to TWRP
Flashed old custom recovery via TWRP
complete wipe
flashed new TWRP custom recovery via adb sideload since my sd card can only be mounted via new TWRP recovery
complete wipe
flashed new LOS13
WiFi still not work!
This is all I did. I realized that fastbood mode is not working for my device, could be a driver problem since my device is installed as ùó something when plugging it into the pc in fastboot mode, so I tried the way via adb.
Hint: I have the model with the alternative hardware, so the second kernel is required to fix flickering display issue.
I realized that the new TWRP recovery has this issue aswell, so my display is flickering from the right side to the center sometimes in TWRP recovery.
Any ideas what could help getting WiFi back to work?
Thanks in advance!
Edit: Could it be that this WiFi problem has something to do with the following thread:
FIX FOR MAC 02:00:00:00:00(WiFi and hotspot not turning ON)
Important. Root required..... Hey everyone,I saw so many posts regarding Android & iOS that the Mac address is changing to 02:00:00:00:00 and WiFi is greyed out. None of the WiFi or hotspot not turning on.I get the same problem in my Condor and...
forum.xda-developers.com
I read over some postings and googled the mac address 02.00.00.00.00 and it seems that a lot of devices had this problem when updating from android 5 to 6. It seems that it could have something to do with the partitions where the info (mac address, IMEI) are stored, but in general I have not found a solution and a specific description of the problem.
Anyway: If the problem can be solved by doing the steps described in the thread I provided above I’m not able to solve this. I would not describe me as a noob, but it seems that I need root and knowledge of permission management for the fix, and I am not very familiar with Linux.

Could you do the following test:
In twrp:
Full wipes ( system, etc etc and internal storage) be sure you back up your stuff
Then reboot to recovery
( It'll warn there's no OS installed)
Back to recovery
Do full wipes again , plug the tab into pc and copy the rom to internal storage
Reboot to recovery again
( It'll warn again, there's no OS installed)
Proceed to flash the rom
This has worked with a user
Issue: for an unknown reason some devices seems to fail mounting / reading nvram
@ twrp I'll do a build for people with this second hardware revision, flickering is annoying...

Thanks for your fast reply.
I did two full wipes with rebooting into recovery after each wipe as you said, then I copied the OS zip file to internal storage and rebooted again to recovery.
After installing the ROM I rebootet to system and LineageOS was preparing the first start. I started without flashing the kernel for alternative hardware (2nd kernel) to check if it works first.
I'm sorry to tell you that I still got no WiFi and Bluetooth connections, Mac address still is shown as 02-00-00-00-00, WiFi cannot be turned on.
Edit: Seems that is has nothing to do with wipes (on my device). I've tried all kind of wipes via TWRP
Format Data -> yes -> reboot to recovery
Advanced Wipe -> check all (Davlik, Cache, Data, Internal Storage, System -> Again format data -> Yes -> reboot to recovery
flashed ROM, 2nd Kernel and GApps -> Reboot to recovery -> reboot to system
Still no WiFi. Perhaps I should try to go back to stock rom and see if WiFi works there? Do you think this could make the deal?

test this
full wipes
flash rom, then this kernel afterwards
AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com

Again, thanks for your efforts, it seems to be a really tough and bugging one, since the new kernel did also not fix the problem.
Edit: Just to keep u updated: I just flashed old recovery and afterwords old LineageOS 12, WiFi is working well. So there must be some problem with the update or the update process. I will try to wipe first and then install new recovery and again install new OS, perhaps this will do the job.
Edit2: BTW I forgot to tell you that I had problems with settings -> about tablet -> status on lineageos 12. Just remembered because i wanted to have a look to the mac address. I get an error telling me "unfortunately, settings has stop". Perhaps important for the update?
Important Edit3:
Guess what: I made it to work. I did the following to do it:
1. Format Data and do all wipes possible with TWRP recovery. Reboot to recovery and do the same again.
2. TWRP recovery -> install old recovery
3. In old recovery -> install via sideload (adb sideload) lineageOS12 and second Kernel (for me because of hardware)
4. Boot to system and check if WiFi works well (finish the initialization of the device and connect to a WiFi)
5. Boot to recovery (old recovery) -> WITHOUT WIPING install via sideload TWRP recovery
6. Boot to system. (Still lineageos12) check if WiFi still works
7. Boot to TWRP recovery -> WITHOUT WIPING install lineageos13.
8. Boot to system, finish initialization if necessary and check if WiFi still works.
9. Go to setting and do a factory reset from lineageos13 settings
10. Device will reboot to recovery and do the factory reset and automatically will boot back into system.
11. Finish. All should work now.
I don't know what exactly did the job, so I wanted to provide all steps I did.
Since I never flashed an android custom Rom over another without wiping I don't know what errors this procedure can cause. So if someone knows that please let me now that I can have a look if there are errors.
Thanks again for your assistance.

[A11] [R] [ARM64] [A40] AndroidOpenSourceProject - AOSP - Vanilla - feel the pure Android

Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is AOSP?
AOSP (Android Open Source Project) is Android just as Google publishes, without any other modifications or additions. More or less AOSP is the Pixel devices stock ROM without gapps and proprietary additions. Check out the screenshots to know more!
What's working?
Boots
RIL (Calls, SMS)
Mobile data
Bluetooth
WiFi/hotspot
Media (audio/video)
Camera
Camcorder
GPS
Fingerprint
NFC
Sensors
etc.
Bugs?
BT CALLS/voWiFi/voLTE
How to install?
Wipe system, data, dalvik's cache and cache Do not wipe vendor
TWRP:Install > select Image > select if they ask "system" select System and then the AOSP_A40......Image > install
Ofox: Tap on the Image > As system image
Reboot recovery
Flash Gapps
reboot system
Enjoy the goodness of Android 11.
Downloads
ROM: AOSP_VANILLA_STOCK_A40_R [Systemimage only]
Screenshots
Attachment
Sources
https://github.com/aosp-mirror
NOTE: For reporting any bugs, describe the issue properly and make sure to accompany it with a logcat. Without a logcat, bugs cannot and will not be fixed.
Don't forget to hit the thanks button to show love and support my work.​
XDAevDB Information
AOSP 11.0, ROM for the Samsung Galaxy A40
Contributors
Kevios12
Source Code: Kernel Tree
ROM OS Version: 11.0.0
ROM Kernel: Linux 4.x
ROM Firmware Required: OneUI 2.0 or ALT+F4
Based On: AOSP
Version Information
Status: Stable
Created 2021-04-30
Last Updated xxxx-xx-xx

(Based On: AOSP) Roms unfortunately do not have the option to make sim2 passive while sim1 is active (or vice versa). Is there a solution to this?

I have installed the ROM with TWRP and my phone is now bricked, I cannot even get into TWRP anymore. Any idea what I could do now?
- Install order was: Unlocked bootloader, used Odin to install TWRP, flashed Multidisabler, reboot, then followed the instructions here
- Black screen followed the "reboot" button in TWRP
- I can reboot the phone by pressing all three buttons but this will only give me the Samsung warning I have to confirm and then black screen again
- this phone uses Exynos CPUs
- OneUI 3.1 was installed before. Is that the issue? I read "Firmware required" as "Minimum Firmware required"...
Edit: I can NOT reboot the phone while a USB cable is plugged in.

Yes OneUI 2.0 is required. OneUI3 FW is GAY! And you can go instand to twrp by pressing power + vol - then if restart hold power+vol+ if samsung logo come, release powerbutton and wait. Have u the A40 for sure? the rom is testet and works, nobody has a brick or whatever. Flash This image as system_image only no wipe vendor or everything btw. look in other treads for my custom vendor it will works.

kevios12 said:
Yes OneUI 2.0 is required. OneUI3 FW is GAY!
Click to expand...
Click to collapse
So I managed to flash OneUI 2.0 and then repeated the whole process and now your ROM boots. I can't connect to WIFI though (yes I made sure I used the correct password). It just says "connecting failed". Also, when I call someone, there is no call window. Is this ROM compatible with FlameGApps?
Also, yes, definitely the A40.

only u can Try gapps idk if flame works. did u use WPA2/3? combinied

My router uses WPA2/3 combined and Android does not give me an option.

I was now able to connect to another Wifi and tried to update my apps. It tells me I had not enough space. But I have over 50 GB free.
Edit: So, the Wifi problem depends on encryption. WPA+WPA2 works, WPA2+WPA3 does not work. I think that is a bug.
Also, I cannot get Play Store to install anything. It always complains about not enough space despite me having no apps installed and lots of free space on both internal and external memory. Cleaning cache did not help. This happens with both NikGapps and FlameGApps. FlameGApps works way better though.

Also explaine better, it should work maybe bug of gapps

I tried the rom , but it’s stuck on the android logo , any help?

Have u installed vendor? ... the custom one

kevios12 said:
Also explaine better, it should work maybe bug of gapps
Click to expand...
Click to collapse
Possible, but I do not know. Might also be partitioning. I did nothing but flash ROM and flash Gapps, then boot and run through the Gapps initial setup tool that automatically started (connect wifi etc). Then I tried to install any app from the Play Store. It always says I need to free up space before I can install an app. But I have lots of space, tens of GB.

hmm thats weird

It is weird indeed... also, are there known issues with phone calls with a Bluetooth headset? I couldn't use mine today, even though it was properly connected.

kevios12 said:
Have u installed vendor? ... the custom one
Click to expand...
Click to collapse
I did

CozmoGM said:
I did
Click to expand...
Click to collapse
Nevermind , i think i did something wrong , but i reflashed the rom and everything and now it works.

Konzertheld said:
It is weird indeed... also, are there known issues with phone calls with a Bluetooth headset? I couldn't use mine today, even though it was properly connected.
Click to expand...
Click to collapse
known bug, like voLTE/voWIFI/BT CALLS BUG/EXYNOS WONT WORK

kevios12 said:
known bug
Click to expand...
Click to collapse
So... please put that in your description above instead of stating "bugs: none". Other ROMs named the bug with Bluetooth etc and yours didn't, so I assumed it was not relevant. I would not have downloaded it if I knew.

Konzertheld said:
So... please put that in your description above instead of stating "bugs: none". Other ROMs named the bug with Bluetooth etc and yours didn't, so I assumed it was not relevant. I would not have downloaded it if I knew.
Click to expand...
Click to collapse
Well the problem is when you are developer & tester at the same time, because nobody feels like doing it, or you really do everything alone ... mistakes can happen!