Database Info

Device does not have DRK, please install DRK first...

My phone is totally ****ed - Device does not have DRK, please install DRK first...
I try to flash stock firmware but this just comes up when it boots. If I leave it a whilst it will just load into the stock recovery and it says 'device does not have drk, contact to SW PL, please flash ENG binary and install DRK'.
Can't find any guides or anything in the internet hmm.

thrutheeyes said:
My phone is totally ****ed - Device does not have DRK, please install DRK first...
I try to flash stock firmware but this just comes up when it boots. If I leave it a whilst it will just load into the stock recovery and it says 'device does not have drk, contact to SW PL, please flash ENG binary and install DRK'.
Can't find any guides or anything in the internet hmm.
Click to expand...
Click to collapse
Hi mate
Check HERE

thrutheeyes said:
My phone is totally ****ed - Device does not have DRK, please install DRK first...
I try to flash stock firmware but this just comes up when it boots. If I leave it a whilst it will just load into the stock recovery and it says 'device does not have drk, contact to SW PL, please flash ENG binary and install DRK'.
Can't find any guides or anything in the internet hmm.
Click to expand...
Click to collapse
Did you ever figure out the fix for the DRK error. I have the S8+ and just got the same thing, and I can't find a fix for it. Sounds like from another thread, that it's going to be pretty tough to overcome.

DRK means BL file
thrutheeyes said:
My phone is totally ****ed - Device does not have DRK, please install DRK first...
I try to flash stock firmware but this just comes up when it boots. If I leave it a whilst it will just load into the stock recovery and it says 'device does not have drk, contact to SW PL, please flash ENG binary and install DRK'.
Can't find any guides or anything in the internet hmm.
Click to expand...
Click to collapse
If you get DRK problem in your samsung mobiles, it means install correct BL file (Ap, Bl, Cp, CSC )
first check your BL file using odin
how to chek:
1 open odin
2 click on BL
3 select correct odin file
4 put your samsung mobile into downloading mode ( volume down + home button + on/off )
5 connect your mobile via original usb cable to your pc or lapptop
6 click start button in odin
if you got error or fail it's not your correct BL file and you i'll get DRK problem
BL file problems :
DRK error
DRK not find
No support single_SKU
supported API: 3
Dm-verity error....
failed code : 0*02
E:failed to find /misc partition
ete.

s6 EDGE
gm0ney1 said:
Did you ever figure out the fix for the DRK error. I have the S8+ and just got the same thing, and I can't find a fix for it. Sounds like from another thread, that it's going to be pretty tough to overcome.
Click to expand...
Click to collapse
Me funciono rooteando el equipo en el s6ede g925t, pero en el g925i no funciono rooteando...

failed to rebrand from AL10 to FL19 - now bricked - need help

I have totally failed to rebrand my FRD-AL10 (EMUI 5, Nougat) to FRD-L19 (because I was hoping to get rid of all the apps/functions/messages in Chinese) by following the steps listed on another thread.
I did eventually manage to get it to identify as FRD-L19 but when it did boot up it had no stock keyboard only voice commands and the phone was unusable . it said it was Android 7, model FRD-L19 and build number was nrd90m test keys?
I tried to update with the latest FRD-L19 update.app by copying it into the dload and vol up+vol down +power buttons press but the update failed and since then I am stuck with the phone refusing to boot, or to boot into twrp recovery.
It hangs at the booting now orange letters screen (It says "Your device is booting now...." and nothing more happens.
If I hold vol up and power up, it hangs at "Your device is booting now...."
If I wait until it says I can press vol up for Erecovery it goes into Huawei erecovery and that tries to download latest version update by wifi, it connects to wifi but says "Getting package info failed".
If I go to reboot from erecovery it goes back to the Your device is booting now.... and stops.
I can shutdown from erecovery (but if its still plugged in it goes straight back to "Your device is booting now...")
From shutdown (and unplugged from USB) - if I hold vol up+ vol down + power it goes to EMUI Installing update then Software Install failed. The update package does not exist. Please download the package again. Reboot system now.
I don't know how to put an alternative update package into dload when I can only use fastboot mode and nothing else?
I can do that by shutting it own from erecovery shut down page and holding down volume and power up.
I assume I need to go back to stock firmware for FRD-AL10 like this one from another thread FRD-AL10_C00B135_Firmware_China_Nonspecific_Android 6.0_EMUI 4.1_05013LBP
and not version 7.0 stock rom for FLD-L19???
Anyway, I unzipped that and use Huawei extractor tool to extract Boot.img, cust.img, recovery.img and sys.img as suggested on this thread.
I can fastboot flash 3 of those but the cust.img fails to flash with "partition error"
I also tried to fastboot format user data but the command failed FAILED (remote: Command not allowed)
I don't think its possible to use the unbrick function of huawei multitool because I can't get into recovery mode?
I don't think I can get a different copy of update.app file into the dload folder internal memory and use the vol up+ vol down +power buttons because I can no longer get the phone to boot to system.
The fastboot screen says PHONE Unlocked
FRP Unlock
Would be very grateful for suggestions on what I should be doing to unbrick this, please. Sorry for being a stupid newbie.... and I honestly have been reading these threads day and night for 2 days but am still stuck!!
Thanks
Edit: is part of the answer to try to flash a different version of twrp again? So I have to put the right version of twrp.img into my adb folder and then fastboot flash recovery twrp*****.img ? Then I might be able to fastboot boot recovery ? Or if twrp works I can flash the right stock rom? (which one? given I was trying to rebrand)
Or if I could somehow get back system to boot, I could use adb push to put the correct update.app into dload on internal memory and use the vol up+ vol down +power???

Bro first flash the compitable twrp
For nougat flash this twrp https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Follow my rebranding guide in guide and threads there is zip for frd19 flash that one
Here is my guide link https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220

Rommco05 said:
Is better following venugopalu method
Click to expand...
Click to collapse
Yes , becasue my zip contains oem restore if the devcie dont have oem it will restore and successfully restore the device

venugopalu007 said:
Bro first flash the compitable twrp
For nougat flash this twrp https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Follow my rebranding guide in guide and threads there is zip for frd19 flash that one
Here is my guide link https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Click to expand...
Click to collapse
Thank you
That was the twrp had success with before..... but everything seemed to go wrong at step 5 of the debranding guide. Where I was supposed to do a data wipe when the device immediately rebooted after installing the zip?
Then I was confused about whether I needed to put the firmware update file into sdcard/dload or not and whether it should be internal memory /close instead. And whether the firmware was correct when it said Android 6 when the phone said it was android 7????
And then there was no keyboard only google voice.....
But I will definitely start by trying to flash that twrp again... and if that can work... then the L19 Rom from your debranding guide again. And let you know.
Thanks

venugopalu007 said:
Bro first flash the compitable twrp
For nougat flash this twrp https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Follow my rebranding guide in guide and threads there is zip for frd19 flash that one
Here is my guide link https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Click to expand...
Click to collapse
Thank you
That was the twrp had success with before..... but everything seemed to go wrong at step 5 of the debranding guide. Where I was supposed to do a data wipe when the device immediately rebooted after installing the zip?
Then I was confused about whether I needed to put the firmware update file into sdcard/dload or not and whether it should be internal memory /close instead. And whether the firmware was correct when it said Android 6 when the phone said it was android 7????
And then there was no keyboard only google voice.....
But I will definitely start by trying to flash that twrp again... and if that can work... then the L19 Rom from your debranding guide again. And let you know.
Thanks

So held down power which started the reboot and enabled me to press vol up to enter erecovery and choose shut down.
then volume down whilst connecting usb to PC to put into fastboot mode
then copy your file twrp-3.1.1-1-frd.img to minimal adb directory on my pc
then in minimal adb: fastboot flash recovery twrp-3.1.1-1-frd.img
I have got that far.
Then do I fastboot reboot?
and hope it boots to system so I can copy over the zip file from my pc with file explorer and then
do I adb reboot recovery (to get into twrp)?
then install the FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip file using twrp? (or do you mean another method of installing that rom)?
then still in twrp I do Wipe: format user data?
then do I reboot to system?
At what point do I need to copy the update.app to sdcard\dload and use the vol up+ vol down + power to install the update?
Thanks again

Agatha_honor 8 said:
Thank you
That was the twrp had success with before..... but everything seemed to go wrong at step 5 of the debranding guide. Where I was supposed to do a data wipe when the device immediately rebooted after installing the zip?
Then I was confused about whether I needed to put the firmware update file into sdcard/dload or not and whether it should be internal memory /close instead. And whether the firmware was correct when it said Android 6 when the phone said it was android 7????
And then there was no keyboard only google voice.....
But I will definitely start by trying to flash that twrp again... and if that can work... then the L19 Rom from your debranding guide again. And let you know.
Thanks
Click to expand...
Click to collapse
After twrp sucess you have to biot the device it will works normal but you have to go reboot to recovery and do a factory wipe and shutdown then after doebload the official firmware of frd19 which is mm and dlaod the update.app and three buttons trick it will update and relock the bootloader and update to EMUI 5 by the phone updater app in settings

I got this far:
So held down power which started the reboot and enabled me to press vol up to enter erecovery and choose shut down.
then volume down whilst connecting usb to PC to put into fastboot mode
then copy your file twrp-3.1.1-1-frd.img to minimal adb directory on my pc
then in minimal adb: fastboot flash recovery twrp-3.1.1-1-frd.img
then I rebooted and got back to the screen where system fails to load "Your device is booting now"
So I pressed power off and then held down volume up but it boots only to erecovery so I pressed shut down and decided I needed to unplug usb.
I tried again with holding down volume up and powering up and managed to boot into twrp.
In twrp I do wipe: swipe to factory reset.
Twrp says Failed to mount '/cust' (invalid argument)
and Failed to mount '/system' (invalid argument)
with windows explorer on my pc and the phone in twrp I can only see the /sdcard but I can see the FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip is there.
So in twrp I go to install and I try to flash FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip from /external_sd (with the zip signature check and reboot after install boxes unchecked)
It starts to write UPDATE.APP..... Completed! script succeeded....
E: unknown command []]
updating partition details....
Failed to mount /cust (invalid argument)
Failed to mount /data (device or resource busy)
Failed to mount /system (invalid argument)
Failed to mount /product (invalid argument)
I try to wipe data and get the same Failed to mount messages
I down load Honor 8_Firmware_FRD-L19_Android 6.0_EMUI 4.1_C432B131_United Kingdom .zip on my pc and unzip it.
I copy the dload folder including update.app to Honor 8:microSDcard
Then I went to power off in twrp so I could do the 3 button load from dload but twrp says "No OS installed! Are you sure you want to power off?"
So I'm not sure? Please can you help again?

Agatha_honor 8 said:
I got this far:
So held down power which started the reboot and enabled me to press vol up to enter erecovery and choose shut down.
then volume down whilst connecting usb to PC to put into fastboot mode
then copy your file twrp-3.1.1-1-frd.img to minimal adb directory on my pc
then in minimal adb: fastboot flash recovery twrp-3.1.1-1-frd.img
then I rebooted and got back to the screen where system fails to load "Your device is booting now"
So I pressed power off and then held down volume up but it boots only to erecovery so I pressed shut down and decided I needed to unplug usb.
I tried again with holding down volume up and powering up and managed to boot into twrp.
In twrp I do wipe: swipe to factory reset.
Twrp says Failed to mount '/cust' (invalid argument)
and Failed to mount '/system' (invalid argument)
with windows explorer on my pc and the phone in twrp I can only see the /sdcard but I can see the FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip is there.
So in twrp I go to install and I try to flash FRD-L19C432B131-hw-eu-OPU_TWRP_FRD.zip from /external_sd (with the zip signature check and reboot after install boxes unchecked)
It starts to write UPDATE.APP..... Completed! script succeeded....
E: unknown command []]
updating partition details....
Failed to mount /cust (invalid argument)
Failed to mount /data (device or resource busy)
Failed to mount /system (invalid argument)
Failed to mount /product (invalid argument)
I try to wipe data and get the same Failed to mount messages
I down load Honor 8_Firmware_FRD-L19_Android 6.0_EMUI 4.1_C432B131_United Kingdom .zip on my pc and unzip it.
I copy the dload folder including update.app to Honor 8:microSDcard
Then I went to power off in twrp so I could do the 3 button load from dload but twrp says "No OS installed! Are you sure you want to power off?"
So I'm not sure? Please can you help again?
Click to expand...
Click to collapse
bro neglet the mount issues after update.app write sucess reboot the phone once and let it boot comoletly .after that dload the offical ROM of frd l19 . and do a reset in stock recovery.

Ok so I rebooted and EMUI said it was doing a factory reset
then the phone booted up with asking me for language, wifi password
then it wants to do a quick update FRD-L19432B360 2.83 GB so I hit quick update.
then it reboots like a normal set up and the keyboard works and everything looks ok. It says that the build number is FRD-L19432B360
Do I still need to do the dload?
Thank you so much - I would never have got this far otherwise!

Agatha_honor 8 said:
Ok so I rebooted and EMUI said it was doing a factory reset
then the phone booted up with asking me for language, wifi password
then it wants to do a quick update FRD-L19432B360 2.83 GB so I hit quick update.
then it reboots like a normal set up and the keyboard works and everything looks ok. It says that the build number is FRD-L19432B360
Do I still need to do the dload?
Thank you so much - I would never have got this far otherwise!
Click to expand...
Click to collapse
No bro not needed , enjoy the device .
Add the fixed tag to the thread.:highfive:
---------- Post added at 03:22 PM ---------- Previous post was at 03:18 PM ----------
Bro but i will suggest you to from marshmallow go directly to the new update of nougat using firmware finder because, the update from b360 is stopped, sh!t huawei server stopped the update idk y , many people also stucked in b360 , so my idea is just go to latest update in firmware finder from marshmallow.
Any help just reply.
If you got another update from b360 just neglet my above steps and go on . Enjoy.

It was ok today when it wanted to update to B389. Now I'm stuck back with only erecovery again.
I can get back into fastboot and unlock the phone again and I put on twrp again and got back into it but
I'm confused about which firmware I need to flash
The latest version for FRD L19 in firmware finder is B392 and I would need the 3 files - update.zip, update_full_FRD-L19_hw_eu.zip and update_data_full_public.zip and to flash all 3 - I tried that but got a lot of errors and it won't boot
But I need to flash something or put on the MM dload/MM update you posted first? do I go back to the B131 MM you linked before first? Then I somehow update to the B392?
I'm so sorry to keep asking stupid questions!!

Agatha_honor 8 said:
It was ok today when it wanted to update to B389. Now I'm stuck back with only erecovery again.
I can get back into fastboot and unlock the phone again and I put on twrp again and got back into it but
I'm confused about which firmware I need to flash
The latest version for FRD L19 in firmware finder is B392 and I would need the 3 files - update.zip, update_full_FRD-L19_hw_eu.zip and update_data_full_public.zip and to flash all 3 - I tried that but got a lot of errors and it won't boot
But I need to flash something or put on the MM dload/MM update you posted first? do I go back to the B131 MM you linked before first? Then I somehow update to the B392?
I'm so sorry to keep asking stupid questions!!
Click to expand...
Click to collapse
Flash this first update_full_FRD-L19_hw_eu.zip
And then flash update.zip .
If after flashing reboot got strucked in blue screen just format factory resey in recovery.

I flashed update_full_FRD-L19_hw_eu.zip
And then flash update.zip .
They both failed with error 7?
So I went back to your B131 and my phone is unbricked but this time I didn't accept B360.
But how do I get to the latest Nougat?
From Firmware Finder I thought it was B392 for L19CB432 but maybe its B384 for L19C10??

Agatha_honor 8 said:
I flashed update_full_FRD-L19_hw_eu.zip
And then flash update.zip .
They both failed with error 7?
So I went back to your B131 and my phone is unbricked but this time I didn't accept B360.
But how do I get to the latest Nougat?
From Firmware Finder I thought it was B392 for L19CB432 but maybe its B384 for L19C10??
Click to expand...
Click to collapse
Strange
So just update to nougat via system app , later try to flash the zips through twrp and give atry

Ok thanks updated to b360 again via system app so build number is showing FRD-L19432B360
then oem unlock then flash twrp then tried to twrp flash B392 for L19CB432 update_full_FRD-L19_hw_eu.zip but twrp says "E: unknown command [errno]
update_huawei_pkg_from_ota.zip: update package from zip failed
Updated process ended with Error:7
Error installing zip file '/external_sd/update_full_FRD_hw_eu.zip '

Agatha_honor 8 said:
Ok thanks updated to b360 again via system app so build number is showing FRD-L19432B360
then oem unlock then flash twrp then tried to twrp flash B392 for L19CB432 update_full_FRD-L19_hw_eu.zip but twrp says "E: unknown command [errno]
update_huawei_pkg_from_ota.zip: update package from zip failed
Updated process ended with Error:7
Error installing zip file '/external_sd/update_full_FRD_hw_eu.zip '
Click to expand...
Click to collapse
The problem is in b392 they are not flashable , decrease the version try all because idk y the zips are not flashing , in my version frdl02 they are flashed successfully without any issue.

Agatha_honor 8 said:
Ok so I rebooted and EMUI said it was doing a factory reset
then the phone booted up with asking me for language, wifi password
then it wants to do a quick update FRD-L19432B360 2.83 GB so I hit quick update.
then it reboots like a normal set up and the keyboard works and everything looks ok. It says that the build number is FRD-L19432B360
Do I still need to do the dload?
Thank you so much - I would never have got this far otherwise!
Click to expand...
Click to collapse
I Need This Firmware Plz FRD-L19432B360
I Tried To Find Full Package But Could Not Find
I Need Help Plz
Thanks Anticipation

Galaxy s7 FRP lock, dm verity error, need help

Hello, i just got my GS7 as an upgrade from rogers a few days ago. I flashed TWRP and rooted with CF auto root. I made a huge mistake by disabling developer options after rooting, and then rebooted my phone. When i disabled developer options, it also disabled OEM unlock. When my phone rebooted it said in red letters above the samsung logo: Custom binary blocked by FRP lock. It would then turn off and only show that screen. I could not boot into recovery, i could only go to download mode. So using odin i attempted to flash the stock firmware and stock recovery. Now when i try to turn on my phone it is stuck in a boot loop but i can get into the stock recovery. In recovery i did a factory reset, but it was still in a boot loop. At the bottom of the recovery page it says:
No Support SINGLE-SKU
Supported API: 3
dm-verity error . . .
In download mode it says: ODIN MODE
DOWNLOAD SPEED: FAST
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download : Enabled
WARRANTY VOID: 1 (0X0500)
RP SWREV: B:2 K:0 S:1
I have tried using kies 3 emergency firmware recovery, but my device does not show up on the list. I tried firmware upgrade and initialization by entering model number and serial number, but it says SM-G930W8 does not support initialization.
MODEL: SM-G930W8
SM-G930WZKAXAC
Im stuck and dont know what else to try. Any advice?

mrkole said:
Hello, i just got my GS7 as an upgrade from rogers a few days ago. I flashed TWRP and rooted with CF auto root. I made a huge mistake by disabling developer options after rooting, and then rebooted my phone. When i disabled developer options, it also disabled OEM unlock. When my phone rebooted it said in red letters above the samsung logo: Custom binary blocked by FRP lock. It would then turn off and only show that screen. I could not boot into recovery, i could only go to download mode. So using odin i attempted to flash the stock firmware and stock recovery. Now when i try to turn on my phone it is stuck in a boot loop but i can get into the stock recovery. In recovery i did a factory reset, but it was still in a boot loop. At the bottom of the recovery page it says:
No Support SINGLE-SKU
Supported API: 3
dm-verity error . . .
In download mode it says: ODIN MODE
DOWNLOAD SPEED: FAST
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download : Enabled
WARRANTY VOID: 1 (0X0500)
RP SWREV: B:2 K:0 S:1
I have tried using kies 3 emergency firmware recovery, but my device does not show up on the list. I tried firmware upgrade and initialization by entering model number and serial number, but it says SM-G930W8 does not support initialization.
s/n: r58jc1a22hr
MODEL: SM-G930W8
SM-G930WZKAXAC
Im stuck and dont know what else to try. Any advice?
Click to expand...
Click to collapse
When flashing with Odin, what files did you use? (Did you use all 4: BL, AP, CP, and CSC?)

Craz Basics said:
When flashing with Odin, what files did you use? (Did you use all 4: BL, AP, CP, and CSC?)
Click to expand...
Click to collapse
i only used AP. I was following a youtube video where he only selected AP

mrkole said:
i only used AP. I was following a youtube video where he only selected AP
Click to expand...
Click to collapse
Ah. You need to use atleast ap AND csc. Dont use home csc if its there.

Down the stock ROM from sammobile.com. It will be in a zip format. Unzip once it using 7zip to yield a tar.md5 file. Just flash this entire file in the appropriate Odin slot.
I have always flash Samsung stock firmware without splitting the firmware into 4 files.
I would not use kies anymore.

audit13 said:
Down the stock ROM from sammobile.com. It will be in a zip format. Unzip once it using 7zip to yield a tar.md5 file. Just flash this entire file in the appropriate Odin slot.
I have always flash Samsung stock firmware without splitting the firmware into 4 files.
I would not use kies anymore.
Click to expand...
Click to collapse
Update: I flashed "combination files" which was supposed to disable FRP lock. After flashing I seem to have gotten an entirely new 'recovery?' I'm really not sure what this is or where to go from here. This is what it looks like: Combination Files https://imgur.com/gallery/jsJIJ
Any ideas on what this is?

Craz Basics said:
Ah. You need to use atleast ap AND csc. Dont use home csc if its there.
Click to expand...
Click to collapse
Update: I flashed "combination files" which was supposed to disable FRP lock. After flashing I seem to have gotten an entirely new 'recovery?' I'm really not sure what this is or where to go from here. This is what it looks like: Combination Files https://imgur.com/gallery/jsJIJ
Any ideas on what this is?

mrkole said:
Update: I flashed "combination files" which was supposed to disable FRP lock. After flashing I seem to have gotten an entirely new 'recovery?' I'm really not sure what this is or where to go from here. This is what it looks like: Combination Files https://imgur.com/gallery/jsJIJ
Any ideas on what this is?
Click to expand...
Click to collapse
Thats the recovery or android?
Download this: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/XAC/download/G930W8VLU2BQK4/198012/
And flash all 4 files in Odin. Not sure what firmware you flashed lol. This should fix up everything, you'll have to unlock the bootloader again if you had to unlock it yourself.

Here is the latest Rogers rom I found: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/RWC/download/G930W8VLU2BQK4/197399/
I have never flashed 4 files to a Samsung phone when restoring to stock. I download the file, zip once to get a single tar.md5 for, and flash the single file in Odin.

Craz Basics said:
Thats the recovery or android?
Download this: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/XAC/download/G930W8VLU2BQK4/198012/
And flash all 4 files in Odin. Not sure what firmware you flashed lol. This should fix up everything, you'll have to unlock the bootloader again if you had to unlock it yourself.
Click to expand...
Click to collapse
Solved!!! after flashing combination files found here: https://www.androidfilehost.com/?fid=529152257862696216
on the left panel i could enable developer options in the settings app: https://imgur.com/gallery/jsJIJ
Then using the free trial of the chimera tool for windows i downloaded and flashed the stock firmware. Phone booted up and i just had to enter my google account info and i was good to go!

audit13 said:
Here is the latest Rogers rom I found: https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/RWC/download/G930W8VLU2BQK4/197399/
I have never flashed 4 files to a Samsung phone when restoring to stock. I download the file, zip once to get a single tar.md5 for, and flash the single file in Odin.
Click to expand...
Click to collapse
Solved!!! after flashing combination files found here: https://www.androidfilehost.com/?fid=529152257862696216
on the left panel i could enable developer options in the settings app: https://imgur.com/gallery/jsJIJ
Then using the free trial of the chimera tool for windows i downloaded and flashed the stock firmware. Phone booted up and i just had to enter my google account info and i was good to go!

FRP unlock SM-G930F Oreo 8.0.0 (binary 3?)

Hey! Found an S7 in June, no one claimed for three months so yeh... My phone now. I accidentally upgraded firmware to G930FXXS3ERHD. Is there a way to bypass the FRP lock with this version? I have tried everything I could find on the internet.
Download mode says:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Secure Download: Enabled
FRP LOCK: ON
AP SWREV: B:3 K:1 S:2

contact me via whtasapp +2347069605746

i am stuck with the same problem...
monsterkaka said:
Hey! Found an S7 in June, no one claimed for three months so yeh... My phone now. I accidentally upgraded firmware to G930FXXS3ERHD. Is there a way to bypass the FRP lock with this version? I have tried everything I could find on the internet.
Download mode says:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Secure Download: Enabled
FRP LOCK: ON
AP SWREV: B:3 K:1 S:2
Click to expand...
Click to collapse
i need help to ...i guess

same problem here pretty much, any solutions?

please disregard. accidently posted
disregard. mistake

I'm stuck in same issue
monsterkaka said:
Hey! Found an S7 in June, no one claimed for three months so yeh... My phone now. I accidentally upgraded firmware to G930FXXS3ERHD. Is there a way to bypass the FRP lock with this version? I have tried everything I could find on the internet.
Download mode says:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Secure Download: Enabled
FRP LOCK: ON
AP SWREV: B:3 K:1 S:2
Click to expand...
Click to collapse
BINARY: Samsung official
System status: official
FRP LOCK: ON
Secure Download: Enable
Warranty: 0x030c
RP SWREV: B:3 K:1 S:2
KERNEL REV. CHECK FAIL. DEVICE:1, BINARY:0
I tried Smart Switch recovery feature but it's now showing there. When I try to go to recovery mode. It said. "An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software". Backstory. I install TWRP in the device from download mode without rooting it. And jump to TWRP on the first restart. And install SuperUser, Xpose etc then restart and enable Super User on boot. The phone is locked after installing new updates. I try to flash BL, AP using Odin 3.12 and 3.13.1. It's failing
Can't turn on the phone. What to do? Please help. Thanks

Step one: Download some marshmallow rom or some nougat rom which has some frp bypass exploit, download an oreo rom and download patched odin https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Step two: flash the oreo rom and boot your device, so you know that your device does actually boot and is not totally broken.
Step three: you need to mix up the two roms, its been a while since i've done this, so i don't remember how i mixed the roms up, i think i installed AP, CP and CSC of the marshmallow/nougat rom and BL of the Oreo rom. Just try this out, if it won't work, you need to try to mix them up differently, maybe install BL and CP of the Oreo rom and AP + CSC of the marshmallow/nougat rom. Just try out until odin says it passed and the phone boots into marshmallow/nougat
Step four: use an frp bypass exploit that works on the marshallow/nougat rom you installed
please don't be angry because of my bad english and bad formatting, hope it works for you. I did this on the second bootloader version, so maybe samsung fixed this on your bootloader version.

qamar.cyb said:
BINARY: Samsung official
System status: official
FRP LOCK: ON
Secure Download: Enable
Warranty: 0x030c
RP SWREV: B:3 K:1 S:2
KERNEL REV. CHECK FAIL. DEVICE:1, BINARY:0
I tried Smart Switch recovery feature but it's now showing there. When I try to go to recovery mode. It said. "An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software". Backstory. I install TWRP in the device from download mode without rooting it. And jump to TWRP on the first restart. And install SuperUser, Xpose etc then restart and enable Super User on boot. The phone is locked after installing new updates. I try to flash BL, AP using Odin 3.12 and 3.13.1. It's failing
Can't turn on the phone. What to do? Please help. Thanks
Click to expand...
Click to collapse
Sorry for late answer, I think I can help. I can upload files later for you to download.

I followed this video and it works. (Verified on SM-G930F)
edit:
Cannot post outside links, but search on youtube for "BOOM!!!Without PC! Samsung S7 Edge SM-G935F Binary 3 Remove Google Account.Bypass FRP." on youtube.
Hope it helps

frp off binary3
monsterkaka said:
Hey! Found an S7 in June, no one claimed for three months so yeh... My phone now. I accidentally upgraded firmware to G930FXXS3ERHD. Is there a way to bypass the FRP lock with this version? I have tried everything I could find on the internet.
Download mode says:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Secure Download: Enabled
FRP LOCK: ON
AP SWREV: B:3 K:1 S:2
Click to expand...
Click to collapse
Bypass on the g930F starting Google Android 8 BINARY 3
download the firmware combination for it COMBINATION_FA60_G930FXXU3ARI2_CL7964511_QB19635501_REV00_user_mid_noship.tar
THE PHONE IS IN DONLOAD MODE AND WRITE <AP> WITH ODIN
after firmware and first shut down
we will go into recovery - the module deletes the data (the rest of the factory values)
after uploaded in the system allows the developer and debug mode with * # 0808 # ACTIVATE DM + DHW + ADB AND MAKE RESTART.
AFTER RESTART IS THE PHONE IN DONLOAD MODE Flash 8 Android i G930FXXS3ERHD - 8.0.0 - BTU (United Kingdom) - Multi Firmware + PIT
Extract from boot, system and boot (AP and BL)
!!!! Be the APs and BLs. WILL BE MODIFIED FROM MD5. RENEME .TAR (SHOW ARCHIVE RAR)
DONLOAD WITH ODIN AP + BL
Restart and wait. (after program optimization) TELEPHONE WILL BE FRP OF!

BOGDANCOSARCA said:
Bypass on the g930F starting Google Android 8 BINARY 3
download the firmware combination for it COMBINATION_FA60_G930FXXU3ARI2_CL7964511_QB19635501_REV00_user_mid_noship.tar
THE PHONE IS IN DONLOAD MODE AND WRITE <AP> WITH ODIN
after firmware and first shut down
we will go into recovery - the module deletes the data (the rest of the factory values)
after uploaded in the system allows the developer and debug mode with * # 0808 # ACTIVATE DM + DHW + ADB AND MAKE RESTART.
AFTER RESTART IS THE PHONE IN DONLOAD MODE Flash 8 Android i G930FXXS3ERHD - 8.0.0 - BTU (United Kingdom) - Multi Firmware + PIT
Extract from boot, system and boot (AP and BL)
!!!! Be the APs and BLs. WILL BE MODIFIED FROM MD5. RENEME .TAR (SHOW ARCHIVE RAR)
DONLOAD WITH ODIN AP + BL
Restart and wait. (after program optimization) TELEPHONE WILL BE FRP OF!
Click to expand...
Click to collapse
Thank you, but it is already fixed.

monsterkaka said:
Thank you, but it is already fixed.
Click to expand...
Click to collapse
Hi Someone please help me, im on binary 3 oreao firmware, ive tried various things but im learning also but would like a fix.
please help?

monsterkaka said:
Thank you, but it is already fixed.
Click to expand...
Click to collapse
Hi Mate how did you fix this?? is your last problem was something like this? if its YES help me. check atteachments.

pedropenduko said:
Hi Mate how did you fix this?? is your last problem was something like this? if its YES help me. check atteachments.
Click to expand...
Click to collapse
Yes something like that. PM me if you still have the problem. I might be able to help.

BOGDANCOSARCA said:
Bypass on the g930F starting Google Android 8 BINARY 3
download the firmware combination for it COMBINATION_FA60_G930FXXU3ARI2_CL7964511_QB19635501_REV00_user_mid_noship.tar
THE PHONE IS IN DONLOAD MODE AND WRITE <AP> WITH ODIN
after firmware and first shut down
we will go into recovery - the module deletes the data (the rest of the factory values)
after uploaded in the system allows the developer and debug mode with * # 0808 # ACTIVATE DM + DHW + ADB AND MAKE RESTART.
AFTER RESTART IS THE PHONE IN DONLOAD MODE Flash 8 Android i G930FXXS3ERHD - 8.0.0 - BTU (United Kingdom) - Multi Firmware + PIT
Extract from boot, system and boot (AP and BL)
!!!! Be the APs and BLs. WILL BE MODIFIED FROM MD5. RENEME .TAR (SHOW ARCHIVE RAR)
DONLOAD WITH ODIN AP + BL
Restart and wait. (after program optimization) TELEPHONE WILL BE FRP OF!
Click to expand...
Click to collapse
can you make it more clear plz from "we will go into recovery...." i cant understand what you typing here...

i have thesame problem
monsterkaka said:
Yes something like that. PM me if you still have the problem. I might be able to help.
Click to expand...
Click to collapse
mate... can u tell us the solution? thanks

Samsung Galaxy Tab A not booting up

Hi All,
I have a Samsung Galaxy Tab A SM-T380 that is not booting up. Upon trying to do a factory reset the following message is seen.
Code:
Android Recovery
samsung/gta2swifidx/gta2swifi
9/PPR1.180610.011/T380DXU3CSI5
user/release-keys
Use volume up/down and power
<Recovery menu here>
#Reboot Recovery Cause is [[check_boot_mode]RebootRecovryWithKey]
#
No Support SINGLE-SKU
File Based OTA
Supported API: 3
E: unknown volume for path [/odm]
E: unknown vloum for path [/vendor]
dm-verity verification failed...
E: Failed to clear BCB message: failed to open /dev/block/bootdevice/by-name/misc: No such file or directory
After selecting the factory reset option I get this message
Code:
--Wiping data...
Formatting /data...
Formatting /cache...
Data wipe complete.
E: Failed to clear BCB message: failed to open /dev/block/bootdevice/by-name/misc: No such file or directory
Upon selecting the bootloader option I get this
Code:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-T380
CURRENT BINARY: SAMSUNG OFFICIAL
FAP LOCK: ON
OEM LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A3, P1
RP SWREV: K 2, S 2
SECURE DOWNLOAD: ENABLE
DOWNLOAD MODE!!
Please I have not tried to install any custom ROM. No idea why this happened.
Any help in getting this working is appreciated.
Thanks and Regards

Used ODIN and stock firmware to reflash got it working
Used ODIN and stock firmware from sammobile to reflash it and got it working.
Thanks and regards,

cybarite said:
Used ODIN and stock firmware from sammobile to reflash it and got it working.
Thanks and regards,
Click to expand...
Click to collapse
I have the same problem. What Odin did you use and which slot did you use to flash the firmware? Please help. Thanks so much.

alias4ever said:
I have the same problem. What Odin did you use and which slot did you use to flash the firmware? Please help. Thanks so much.
Click to expand...
Click to collapse
Odin v3.14.4. I flashed it using by connecting the usb cable to the PC.
Regards
Cybarite