Database Info

[Guide][Updated 2016] Install CM12.1 (Android 5.1.1 Lollipop) on GT-S7582

Hey Guys,
Many People are confused how to install CM 12.1 (lollipop) ROM on our device.
So, here's a brief Guide.
Part 1: Installing Recovery
1. Download TWRP Recovery From the Link: https://www.androidfilehost.com/?fid=24407100847293110
2. Download ODIN From this link. http://odindownload.com/download/Odin3_v3.10.7.zip
3. Install Samsung USB Drivers. http://androidhost.org/XIVsA
4. Extract Odin and run odin.exe on your pc.
5. Shut Down your Phone and Press Volume down + power button + home button simultaneously.
6. Press Continue.
7. Open Odin on your pc and select AP and browse to the recovery file you downloaded.
8. It shows port no in ID:COM section. Dont touch any other thing and press start.
9. Now, Your Phone will automatically rebooted.
Part 2 : Installing ROM
10. Download these stuff and copy them to ur microsd card.
CM 12.1 - 6 March Update - https://www.androidfilehost.com/?fid=24438995911971793
GAPPS (For Play Store) - https://www.androidfilehost.com/?w=files&flid=31528
11. Shut Down your Phone and press Volume Up + Power + Home at same time.
12. TWRP Recovery will now open.
Note:When entering TWRP Recovery, it will ask you if you want to keep system partition Read only, check the box "Never show this screen during boot again" and swipe the lock bar, else you can't modify system partition in TWRP like install ROM, root...
13. Select Wipe and wipe cache, dalvik cache, system, internal storage,data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
14. Select Install and select the rom file and install it. (it may take some time)
15. Now Select Install again and select gapps zip and reboot system and you are all done.
Hit Thanks if this is useful for you.
Leave your FeedBack
use same procedure for flashing cm11 as well but obviously download cm11 rom and gapps for android 4.4.4

Thank you

i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?

did it get completed on odin? Try changing usb cable and usb port

Will it work with cwm
And also is it necessary to download (gapps)

Does it have to be stock frimware so the rom could be installed?

Thank's DEV @SandPox for this nice ROM and for the effort to do for all bugs.
__________ OFFICCIAL _________
http://forum.cyanogenmod.org/topic/...galaxy-trend-plus-s-duos-2-gt-s7580-gt-s7582/

please help
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap

How to fix deadlock or headset problem...
Experimental kernel
https://www.androidfilehost.com/?fid=24269982087004359
Code:
Note for who don't know how to upgrade kernel:
This zip file are not supposed to be flash in recovery
extract it 1 time, you'll get modules/ and kernel.tar
kernel.tar flash by odin or extract it to get boot.img and flash it by any method you want
modules/* copy to /system/lib/modules/, old file must be delete and copy new file to there (remember to backup old modules)
this kernel are supposed to not have any deadlock or headset problem, report to me if anything gone wrong
remember to backup your old kernel
know problem: incall make phone crash, will fix later
damn.. i forgot to fix RIL for s7582, RIL will not work for s7582
surprise: I just know how to fix dialer lag, our phone kernel set the limit to 60fps maximum frame rate, I tried to increase it to 70fps and dialer lag is gone xD
Credits:
Sandpox

Its not installing . I tried it . Showing an error but gaaps is working.

rahulhanda20 said:
Will it work with cwm
And also is it necessary to download (gapps)
Click to expand...
Click to collapse
Try CWM..
Gapps is for play store and framework

munthir said:
Does it have to be stock frimware so the rom could be installed?
Click to expand...
Click to collapse
Not necessary but recomended

alay shah said:
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
Click to expand...
Click to collapse
i think u have selected read only whenu opened twrp first time...
Install TWRP again and uncheck read only check on dont ask again and continue...and it will work

Light Hope said:
Its not installing . I tried it . Showing an error but gaaps is working.
Click to expand...
Click to collapse
What Error u got

Mohned said:
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
Click to expand...
Click to collapse
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:

tried that solution but still it shows same error... e unable to mount system

For this do we need to be on CM 11 ????

Light Hope said:
For this do we need to be on CM 11 ????
Click to expand...
Click to collapse
It doesnt matter whether u are on cm11 or stock unless u wipe everything (except external sd) before install

abbi339 said:
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
Click to expand...
Click to collapse
Thanks alot for replying me^^ .. i'll try this and tell you the results later ..oh and sorry for my bad English

Wow!
It works, no problem.
Can u please tell me how could I root now?
Last time I use I-root but, now its not working.
Give me a instruction please.

Installing twrp and rooting the sm-t116 (tab 3 lite 7.0 3g)

IM NOT RESPONSIBLE IF YOU BRICK YOUR TAB OR DECIDE TO BE CARELESS OR CREATE A CYCLONE... you know the drill.
HOW TO ROOT SM-T116 TAB 3 LITE 7.0 3G VOYAGE-XX ( Galaxy Tab 3 Lite VE (3G) (SM-T116 ))
After searching for over a month on how to root/install twrp all i cound find were instructions for the SM-T110/1...
if thread already exists pls notify
N.B I TAKE NO CREDIT FOR THIS RECOVERY IN ANYWAY
I am writting to help fellow SM-T116 owners... Since ive been searching for a long time.... I believe there isnt a guide to root this Tab yet.
- N.B MAKE SURE you device's code name is goyave or goyave3g
1. Download the twrp recovery here
- download the recovery in .tar format...
- you will upgrade to v3 manually.
2. Download Odin v3.10.* here
-> copy them to a place you know on ur pc such as Desktop
3. Boot your Tab 3 lite to download mode by: pressing "power + home + vol down"
-> believing all your drivers are installed correctly
3.1 open Odin*.exe ,
3.2 connect your tab and press volume up...
-> at this stage Odin should recognise your device
on the ID:COM section like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. UNTICK AUTO REBOOT or you wont be able to enter recovery
5. Tap pn AP and go to the recovery you downloaded.
select it
6. Press on Start to begin the flashing process
-> After Odin flashes the recovery it will tell you PASS!
7
7.1. Preas and hold POWER + VOLUME DOWN
7.2. when the screen goes black change and hold HOME + VOLUME UP
Now you will enter TWRP... stage 1 done.
rooting on post #2:good:​

Now TWRP is functional... Time to root.
1. Download Chainfire's SuperSu flashable zip here
-> and thanking is not a crime.
2. Reboot to recovery...
ALLOW TWRP TO MODIFY THE SYSTEM PARTITION
3.1. Select install
3.2. navigate to your supersu zip
/sdcard/* or /extsdcard/*
-> when you are at the folder where your zip is it will be on the dialog on the right.
4.1. select it
4.2. swipe to confirm
4.3. select wipe cache/dalvik and reboot...
Now you have a Custom Recovery and you are rooted... Doors open.
Becarefull to not to open the wrong doors ​
THE PEOPLE WHO MADE THIS POSSIBLE
CREDIT GOES TO:
BIG THANKS TO TeamWin - TWRP FOR THE AWESOME RECOVERY AND
CHAINFIRE for the awesome supersu
SAMSUNG FOR Odin and Demostration Image
THATS IT...!!!!!!!!!!!!!!!!!!!!!!!!!!
will upload deodexed and zipalign rom soon.

Very nice !
:laugh::laugh::laugh:

This works for 116NY too xD

hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?

I am new with Android. Please, can you describe step by step process

peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
Which part fails bro cause a more detailed procedure is a video right

diana-TF said:
I am new with Android. Please, can you describe step by step process
Click to expand...
Click to collapse
Ill add numbering then...
I wrote every step 1 by 1.
U r probably comfused cause there aren't any numbering as to what to do first.

hi...Replies to Android 4.4.4؟؟؟؟؟

h.azara said:
hi...Replies to Android 4.4.4؟؟؟؟؟
Click to expand...
Click to collapse
Whatsup

Can you please post a link for custom rom

Ponie123 said:
Can you please post a link for custom rom
Click to expand...
Click to collapse
Custom Rom like??

nhlalukoG said:
Custom Rom like??
Click to expand...
Click to collapse
Like CYANOGEN or Pac man

Lol they r built bro...
N i guess no one has built it...

peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
i will help you,
1: install kingoroot on your pc
2:Enable USB debugging
3:connect your phone to pc wait for processing
4:when 99% your phone automatically restarted, do not put off the usb cable when it complete
5:hope your phone will b e rooted

I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this

Adebayo0437 said:
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Click to expand...
Click to collapse
Hahaha not possible... the update.zip need to be signed by Samsung specifically...
Unless you get a modified stock recovery which needs to be flashed via Odin...

Ok

Rushaan n said:
Ok
Click to expand...
Click to collapse
Does it have "oem unlock" on developer settings??

nhlalukoG said:
Does it have "oem unlock" on developer settings??
Click to expand...
Click to collapse
Deleted

Flashing a ROM on my new SM-G930FD

Hello,
I just purchased a Galaxy S7, and want to flash a rom to it to remove some of the Chinese settings and bloat. I've already rooted it (easy part), but I'm unsure about how to proceed. I want to make sure I have a backup of the original FW that I can put back on via Odin if something goes wrong, but I can't seem to find what I'm looking for at sammobile. I've attached all the info that I got from Phone INFO app hoping that someone can point me in the right direction. I'm most confused about the CSC, as I can't find anything with that same code. And it seems a lot of the others have the same PDA as mine.
For what it's worth, or if anyone can give any advice on customization; I don't care about the DUAL SIM feature (so long as it doesn't affect the microSD card) and would love to get the little "1" next to the phone calls and SMS messages removed.
Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi. I'm no expert but here's what I believe are your next steps:
1. Using Odin you should install TWRP (for recovery). This is where you will install and uninstall most ROMS, Kernels, etc.
Before using Odin and installing TWRP make sure you unlock the Developer Options and activate USB Debugging and OEM Unlock.
2. With TWRP installed, you can now install any ROM. I suggest you install SupermanROM (it's fantastic and it has OTA updates).
Now for each of those things I've told you make sure you read their long instructions.
I hope you enjoy your S7 and the amazing SupermanRom.

gaston_garcia said:
Hi. I'm no expert but here's what I believe are your next steps:
1. Using Odin you should install TWRP (for recovery). This is where you will install and uninstall most ROMS, Kernels, etc.
Before using Odin and installing TWRP make sure you unlock the Developer Options and activate USB Debugging and OEM Unlock.
2. With TWRP installed, you can now install any ROM. I suggest you install SupermanROM (it's fantastic and it has OTA updates).
Now for each of those things I've told you make sure you read their long instructions.
I hope you enjoy your S7 and the amazing SupermanRom.
Click to expand...
Click to collapse
Thank you for the reply. I have already installed TWRP and have all the files needed for Superman. At this point, I want to make sure I have the files needed to flash back to Stock in case something goes wrong. The problem is that I don't know which stock files I need to download.

u can always go back to stock.
1.) download SAMSUNG KIES
2.) open SAMSUNG KIES
3.) click tools , select Firmware upgrade and initialization
4.) Model Name : SM-G930F
5.) your serial #
click OK
follow steps

Studio1b said:
u can always go back to stock.
1.) download SAMSUNG KIES
2.) open SAMSUNG KIES
3.) click tools , select Firmware upgrade and initialization
4.) Model Name : SM-G930F
5.) your serial #
click OK
follow steps
Click to expand...
Click to collapse
I thought I seen somewhere that KIES no longer works after KNOX is tripped? If it does, I would still use 930F even though my model is G930FD?

kies works fine i use it all the time
1.) download SAMSUNG KIES
2.) open SAMSUNG KIES
3.) click tools , select Firmware upgrade and initialization
4.) Model Name : SM-G930FD
5.) your serial #
click OK
follow steps

Internal storage problem
I purchased what shows to be an unlocked Galaxy S7 32Gb (32GB marked on the back of the phone) - Model SM-G930FD - originally T-Mobile.
The phone looks immaculate and shows no physical signs of being opened or tampered with.
I have not put in a new SIM card or taken the phone to be activated on my plan yet. I did put in a 128GB micro card. (Q- I don't assume putting in a SIM card would resolve any of the below issues?)
In settings the phone shows to have 32GB internal storage and recognizes the MicroSD card, but when I connect it to my computer the internal storage only shows 17.5MB available... So obviously when I tried to load the Chrome browser (40+ MB) I got an insufficient memory message. I was hoping it was just reading the available storage wrong.
When I look at Storage under settings it shows that the phone has 32GB internal and 28.15GB available, and it shows 125GB available on the SD Card.
Some of the other info from my About Phone page:
Android Version 6.0.1
Kernel Version:
3.18.14-7162483
[email protected] #1
Wed Aug 17 21:29:07 CST 2016
Build number
MMB29K.G930FXXU1APB6
SE for Android status
Enforcing
SEPF_SECMOBILE_6.0.1_0004
Sat Feb 06 12:08:15 2016
Hardware version
MP 1.000
I tried resetting the phone and erasing all data and it is still the same.
Phone comes on and seems to run fine.
I can't even flush it, I tried rooting it with kingroot which was success, I installed superuser and twrp app which did not help as it can't find my device name under select your device on the twrp app, and when I try try to navigate the files to flush still no luck as I can't find those zip files.
Also when I try to do it manually by restarting the phone by v+, home and power button to recovery
I can't find install zip, it's just
Reboot system now
Apply update from ADB
Apply update from SD card
Wipe data/factory reset
Wipe cache partition
Apply update from cache
That's it
So before I put it up on eBay to get rid of it - is there anything I can do to try to release/recognize the internal storage??
Thank you in advance!!

flash smg930s with smg930fd file through odin
gaston_garcia said:
Hi. I'm no expert but here's what I believe are your next steps:
1. Using Odin you should install TWRP (for recovery). This is where you will install and uninstall most ROMS, Kernels, etc.
Before using Odin and installing TWRP make sure you unlock the Developer Options and activate USB Debugging and OEM Unlock.
2. With TWRP installed, you can now install any ROM. I suggest you install SupermanROM (it's fantastic and it has OTA updates).
Now for each of those things I've told you make sure you read their long instructions.
I hope you enjoy your S7 and the amazing SupermanRom.
Click to expand...
Click to collapse
Can we flash smg930s with smg930fd file through odin ? as I am dying to convert my phone as it support dual sim my phone was previously converted into smg930fd but I got that error Custom Binary blocked by "FRP LOCK" so I flashed my s7 with its own rom smg930s. Kindly Respond ASAP

[HowTo] TWRP + ROOT for Vernee Apollo Lite out Now ;) [WORKS]

Hi now TWRP 3.0.2 its out for your Vernee Apollo Lite [WORKS]
special [email protected][email protected]
tested with latest original Vernee OTA K15TB-A.A.vR1C.N1.160727 (27.07.2016)
bugs: ADB not working. Same isue for ADB sideload and MTP too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Download this Files:
TWRP_302_for_Vernee_Apollo_Lite_P6.zip
UPDATE-SuperSU-v2.76-20160630161323.zip
01-driver-Pc_Windows.rar - If you are under Windows 8/10[FONT=Verdana, Arial, sans-serif, Tahoma] you need to disable signature verification of drivers ! HOWTO)
[/FONT]SP_Flash_Tool_5.1612.00.000_Windows.zip
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation:
1. copy UPDATE-SuperSU-v2.76-20160630161323.zip directly to internal or externeal SD Card.
2. In Phone goto Settings->About Phone->tab 5-7times on (Build number) to activate Developer Options.
3. goto Settings->Developer Options and activate (OEM Unlocking) and (USB debugging).
4. turn Phone completly off.
5. extract (01-driver-Pc_Windows.rar) on your Windows with (7zip) and install with (InstallDriver.exe).
6. extract (SP_Flash_Tool_5.1612.00.000_Windows.zip) on your Windows with (7zip).
7. extract (TWRP_302_for_Vernee_Apollo_Lite_P6.zip) on your Windows with (7zip).
8. open the folder (SP_Flash_Tool_5.1612.00.000_Windows)and run (flash_tool.exe).
9. in SP Flash Tool search the file scatter (MT6797_Android_scatter.txt) with the yellow button on the right (Scatter-loading) in the folder of extract TWRP.
10. Now SP Flash Tool must look like this with only marked at recovery:
11. now in SP Flash Tool press the green (DOWNLOAD) Button on the middle.
12. Plug your Usb Cable into Phone and wait until SP Flash Tool says FINISH! (plz use a USB2 Connector on your Pc!)
13. Now TRWP was flashed and ready to use if NOT, try Step 6-9 again.
14. turn Phone completly off.
15. hold Volume(+) and Power Button for ~5sec until you see the mini Apollo Lite Recovery Menu.
16. with Volume(+) chose RECOVERY Press Volume(-) for Ok.
17. Now you can see TWRP Main Menu Use Language English!!!
18. in TWRP goto (Install ZIP) then (Choose zip from SD Card) or search in (Choose zip from ExtraSD) for UPDATE-SuperSU-v2.76-20160630161323.zip and flash.
19. in TWRP go back and do REBOOT.
20. Now you have a working TWRP and ROOT
xx. If you want to install / flash Xposed and the amazing Dolby Atmos too, check my another HowTo
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Youtube Tutorial English:
https://www.youtube.com/watch?v=5XWoAniehhI
Youtube Tutorial Deutsch:
https://www.youtube.com/watch?v=VjZXw7Bs8jA
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
have fun regards ice

plz move to Vernee Apollo Lite section.
regards ice

Hey, can I use this with the Apollo X25?

Hello. I tried several times to install TWRP. I would like use superdragonpt nougat ROM but I can't do it without rooting my phone. Is there a way to do it with the latest OTA installed?

cant i just use ADB / fastboot to install TWRP? im on linux and im really not the biggest fan of tools like this..

scatter file
how can i create my own scatter file to backup stock rom first ?
mtk droid tool not support mt6797

Anyone gonna do 3.1.1 now?

#ApolloLiteProblems said:
Anyone gonna do 3.1.1 now?
Click to expand...
Click to collapse
Hopefully

Still got 3.0.2....want to go to 3.1 but don't know how without a pc......

Maybe I build TWRP 3.1.1 this week.

Black Manta said:
Maybe I build TWRP 3.1.1 this week.
Click to expand...
Click to collapse
Thanks!

#ApolloLiteProblems said:
Thanks!
Click to expand...
Click to collapse
There is already a new release

#ApolloLiteProblems said:
Thanks!
Click to expand...
Click to collapse
Check the FAQ from madOS. They released it!

Black Manta said:
Check the FAQ from madOS. They released it!
Click to expand...
Click to collapse
Is it for 3.1.1? I just flashed the 3.1 img so it should be fine. Success
---------- Post added at 11:13 AM ---------- Previous post was at 11:11 AM ----------
Black Manta said:
Check the FAQ from madOS. They released it!
Click to expand...
Click to collapse
Can't find the file

I can't unlock the boot loader
Hi, I can't unlock the boot loader. Could someone help me?

I just did it as op instructed.
Kernel version 3.18.22
built version 20170118194258
Many, many thanks
The only difference, I had to use ONLY usb3.

pezmarino said:
Hi, I can't unlock the boot loader. Could someone help me?
Click to expand...
Click to collapse
I didn't need to on mine.

[RECOVERY] TWRP 3.6.x.x for Samsung Galaxy J810G/GF/F/M/Y j8y18lte

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.6.x.x for Samsung Galaxy J8​Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
DOWNLOAD MODE
1. power off your Samsung J8/On8
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open Odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.6.x.x-(j8y18lte)-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: When you see pass message suddenly press and hold vol- key and power
Congratulations you are in recovery now
UPDATING RECOVERY
1. reboot to already installed custom recovery
2. click on install and click button flash .img
3. now select TWRP-3.6.x.x-goldfish07.img file from sdcard
4. choose Recovery option and flash
5 reboot to recovery to check new recovery
6. Enjoy
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
DOWNLOADING FILES
Download TWRP 3.6.x.x.img (recovery flashable)
Download TWRP 3.6.x.x-AP-Odin.tar (Odin flashable)
DOWNLOAD
Thanks to :
@TeamWin For the latest TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07

TWRP 3.6.1_9 build 21 June 2022

#reserved 1

thanks

Hi guys
I see the message on my screen
Only official released binaries are allowed to be flashed.
Click to expand...
Click to collapse
Samsung j810F
What I can do before install it?

Cheat said:
Hi guys
I see the message on my screen
Samsung j810F
What I can do before install it?
Click to expand...
Click to collapse
Oem unlocked in developer option ?

Oem unlocked in developer option ?
Click to expand...
Click to collapse
of course

look at my screens, maybe you can find errors ))

Cheat said:
look at my screens, maybe you can find errors ))
Click to expand...
Click to collapse
yeah, that prenormal thing

Cheat said:
look at my screens, maybe you can find errors ))
Click to expand...
Click to collapse
Or follow this: 1- Restore latest stock (latest update for your country CSC ( IN DOWNLAOD MODE AS "Carrier_ID=XXX")
2- finish setup without sim card or wifi
3- place sim and connect wifi
4- go to date and time, uncheck automatic date and time
5- go to about section, software information
6- Tap build number to enable dev settings
7- uncheck auto update system
8- back to date and time, set date before security patch (march 2021 for example)
9- go to software update, disable auto update on wifi, then spam press it
10- wait 5 min then restart
above instruction taken from telegram group

Or follow this: 1- Restore latest stock (latest update for your country CSC ( IN DOWNLAOD MODE AS "Carrier_ID=XXX")
2- finish setup without sim card or wifi
3- place sim and connect wifi
4- go to date and time, uncheck automatic date and time
5- go to about section, software information
6- Tap build number to enable dev settings
7- uncheck auto update system
8- back to date and time, set date before security patch (march 2021 for example)
9- go to software update, disable auto update on wifi, then spam press it
10- wait 5 min then restart
above instruction taken from telegram group
Click to expand...
Click to collapse
Nice. It's Work! Amazyng! Great thanks

for build 01 december 2021

Cheat said:
Nice. It's Work! Amazyng! Great thanks
Click to expand...
Click to collapse
not work for me