Related
I decided to buy the GSIII after hearing that Samsung had made a great phone, done a decent job of preventing the carriers from ruining the phone, and had become a top level member of the Linux foundation to boot!
But then I heard about the MHL connector scam - and that is one slimy move. Note that it is not only incompatible with the MHL standard, it is incompatible with other Samsung MHL cables. (If Samsung has issued some sort of clarification or explanation then please let me know.)
If I keep looking for perfection amongst the manufacturers I will never get a new phone, but I certainly don't want to simply turn a blind eye to this obnoxious move. If this is successful for Samsung, I can see them creating a fresh batch of incompatible connectors for every new device they create.
I was disappointed that Apple users never raised a fuss through all those years when Apple kept getting rated as the worst environmental offender in the Consumer Electronics industry, but one of the things that sets Android users apart from Apple users is the lack of blind brand loyalty.
So, is there an informal boycott of Samsung accessories afoot?
I guess I'm suggesting that the XDA community could discourage people from buying any of Samsung's "trick" accessories, including their fake MHL and PDMI connectors. I hope consumers will come to realize that, while Samsung makes great phones, their accessories are not a good choice, and I hope that Samsung will come to realize doing stuff like this isn't worth it.
Obviously, the less money they make from this slimy move the less likely they are to repeat it. The outcome is up to us.
[I'm posting in General forum rather then GSIII because I believe this issue - connectors, standards, and taking action - is of general relevance.]
Get ready for a horde of blind Samsung fanboys to flame you, they are just as bad as Apple fanboys. I actually read about this MHL issue. But at least they released the source code for their international device.
For me, personally, I think MHL adaptor is stupid, its clunky and inconvenient, too many wires involved. A dedicated microHDMI connector solution was better, but manufacturers abandoned it to save money because they have to put in another connector and pay royalty. I like the idea of the royalty free DisplayPort, but there is no micro version of it yet.
I'm probably not getting the SIII unless its price drops a lot since the Nexus is still the best phone software wise.
I'm imagining/wishing 2-3 years from now all phones will have a built in projector, but not sure how they'll keep it small.
An update - still appears that the port is a fake
I did my best to get an answer from the MHL Consortium but they would not respond - even to simple question such explaining how a consumer can distinugish an MHL compliant product. But it is a consortium, not a standards body - it represents member companies, not consumers, so I guess this is to be expected. The media types remain confused too.
I put together a quick website to try to inform consumers about this:
http://www.galaxymhl.com/
I believe that Android users are not the 'sheep' that iPhone users are (as evidenced by XDA itself) and I hope we can influence Samsung on this by encouraging consumers to not buy their 'fake' MHL accessories.
Even if Sammie just stops using the MHL branding with the phone and the accessories it will be a big improvement. As things stand, they are really undermining the standard.
Update!
I have received a complete explanation and have posted it there:
http://www.galaxymhl.com/
I'm pleased that, in the end, the advantages of the 11-pin MHL port on the SGS3 are significant enough to allay the initial suspicions that this was just about selling more accessories.
On the other hand, wow, was it ever a ton of work to get a clear explanation - would have thought they would have wanted to explain this clearly from the beginning. At the very least, I might have thought they would posted a clear explanation to a relevant wikipedia article once all the WTF articles started appearing.
It works for Galaxy W?
Inviato dal mio IPhone 5
PasqualeITA said:
It works for Galaxy W?
Inviato dal mio IPhone 5
Click to expand...
Click to collapse
I believe the Galaxy W does not support MHL.
Tomaxda said:
I have received a complete explanation and have posted it there:
I'm pleased that, in the end, the advantages of the 11-pin MHL port on the SGS3 are significant enough to allay the initial suspicions that this was just about selling more accessories.
On the other hand, wow, was it ever a ton of work to get a clear explanation - would have thought they would have wanted to explain this clearly from the beginning. At the very least, I might have thought they would posted a clear explanation to a relevant wikipedia article once all the WTF articles started appearing.
Click to expand...
Click to collapse
Yes, finally I got it. So if I've understood it well, The official MHL adapter works fine to allow you HDTV signal (HDMI) and USB OTG at the same time but... every review I read says that the MHL adapter needs power in its microUSB connector, so has anyone tested if it is possible to get USB OTG in that connector fingers-crossed::fingers-crossed::fingers-crossed??
Thank you very much in advance!
Tularis said:
Yes, finally I got it. So if I've understood it well, The official MHL adapter works fine to allow you HDTV signal (HDMI) and USB OTG at the same time but... every review I read says that the MHL adapter needs power in its microUSB connector, so has anyone tested if it is possible to get USB OTG in that connector fingers-crossed::fingers-crossed::fingers-crossed??
Click to expand...
Click to collapse
I don't have the actual adapter (was boycotting it) so I can't say anything concrete, but I believe that what you are saying conflicts with the explanation that I received. The Samsung adapter for the Galaxy SIII is supposed to be able to get its power from the phone - no need for power from a separate USB cable. The adapter in question is here:
http://www.amazon.com/Adapter-HDMI-EPL-3FHU-Samsung-Galaxy/dp/B0080CXSOU
Can you give me a link to one of these reviews that says otherwise?
Tomaxda said:
Can you give me a link to one of these reviews that says otherwise?
Click to expand...
Click to collapse
Sure, here for example:
clove.co.uk/samsung-galaxy-s3-mhlhdmi-adaptor
It says:
"Please note: For the MHL cable to work you will need to have it connected to mains power."
So I don't really know what to think...Maybe you can power it using a Hub...
At first when I saw the S3 MHL adapter I though in using this connection scheme:
imageshack.us/photo/my-images/341/mhlotg.png
But I've been told that this is not going to work. I have not tested it yet but maybe its a matter of the USB OTG cable used or one of them should not be OTG, I don't know. But I have not been able to find any website or review that shows both, USB OTG + MHL, wroking at the same time and for me that is suspicious...
EDIT: sorry for links but I'm not able to use them yet...Copy+Paste
Tularis said:
Sure, here for example:
clove.co.uk/samsung-galaxy-s3-mhlhdmi-adaptor
It says:
"Please note: For the MHL cable to work you will need to have it connected to mains power."
So I don't really know what to think...Maybe you can power it using a Hub...
At first when I saw the S3 MHL adapter I though in using this connection scheme:
imageshack.us/photo/my-images/341/mhlotg.png
But I've been told that this is not going to work. I have not tested it yet but maybe its a matter of the USB OTG cable used or one of them should not be OTG, I don't know. But I have not been able to find any website or review that shows both, USB OTG + MHL, wroking at the same time and for me that is suspicious...
EDIT: sorry for links but I'm not able to use them yet...Copy+Paste
Click to expand...
Click to collapse
Thanks for supplying that link. I will try to contact Clove to see whether perhaps they just added that disclaimer about needing power because past MHL adapters needed it.
Tomaxda said:
Thanks for supplying that link. I will try to contact Clove to see whether perhaps they just added that disclaimer about needing power because past MHL adapters needed it.
Click to expand...
Click to collapse
I think it needs power in its microUSB female connector, but I wish it doesn't. Nobody has the MHL and the USB OTG to make the test? Maybe the OTG cable should be connected to a USB hub in order to supply power also...I need to test that on my own, but the MHL cable has not arrived yet and Im getting holydays veeeery soon...
The whole mhl thing has put me off getting any adapter.
Does anybody know if the S3 has the capability of connection to a Widi adapter or all the companies developing a medfield platform just to go off and make propritary adapters??
FYI;
Intel claim widi for their phones only
http://software.intel.com/en-us/blo...splay-technology-on-ia-phones#comment-1641598
HTC have their own adapter;
http://www.engadget.com/2012/06/14/htc-media-link-hd-review/
http://www.androidcentral.com/htc-sense-4-complete-walkthrough
Generic stickers to further confuse us all;
http://www.engadget.com/2012/09/19/wi-fi-alliance-announces-first-miracast-certified-devices/
I've been trying to connect but the phone only wants to shoot files at my Belkin adapter, no success.
If the galaxy S3 supports miracast should it work, maybe it will come with jelly bean...
http://www.autoomobile.com/news/samsung-galaxy-s3-lg-optimus-g-miracast/1003391/
I'm hugely confused!
Closed
Wrong section, please read and respect the rules.
As the title says, I want to charge my Nexus 9 while using a keyboard/mouse and other peripherals that I would have connected to the Nexus 9 through a USB hub. I know it is not always possible to charge through the hub, so I was thinking about something like a 'micro USB splitter" that expands the micro-USB port into 2 micro-USB ports: one for the charger that comes with the Nexus 9, and the second port for a OTG cable/usb hub/etc. Anyone have any thoughts on this?
I did read this post here for the Nexus 7 but not sure if the same is true for the Nexus 9.or if any additional options existed for the 9. Ultimately, I guess I'm wondering if it is unrealistic to expect to find something that charges the device at the same time as using a hub/OTG cable without too much modding or hassle? My device is rooted and I've flashed some mods and tweaked some things on previous devices I've had, but am by no means an expert so I would hope to keep the hacking/modding for something like this to a minimum, if possible. Plus, there's an outside chance I may return the Nexus 9 in the next week so I wouldn't want to get too crazy until I knew for sure I'd be keeping it.
I understand that a specific kernel with certain capabilities may be needed, but I'm unsure how to find out which kernel would work and if it would be compatible with stock ROM or CM12 (when it comes out). Any help would be greatly appreciated. Even if it's a pipe dream, I'd at least know not to continue to waste my time looking for a solution that doesn't exist
I tried this one a few days ago but it did not work: https://sites.google.com/site/sonicboomworld/my-projects/otg-and-charging
Maybe it's possible with the right resistor value.
Edit:
Mod for Nexus 7 - needs kernel support:
https://mehrvarz.github.io/usb-host-mode-power-management-nexus7/
Thanks for the reply - is this kernel still being supported by the dev and is it confirmed working on Nexus 9?
I don't know as i do not own a Nexus 7.
But even if he still supports this kernel it would not help much for the Nexus 9:
A kernel is very hardware specific and the OTG changing issues is even more hardware specific.
There is absolutely no chance that you can simply use the N7 kernel on the N9.
One of the amazing kernel developers (who owns a N9) here at XDA would have to look at it.
Generally I think for "OTG + charging" to work the USB chipset on the device has to support it and/or you have to find out how you could trick the device into enabling this mode (with a certain resistor on the USB connector and/or with a kernel modification).
The bad thing is that no device seems to support the official "USB Accessory Charger Adapter" specification. (see section "OTG micro plugs" here: https://en.wikipedia.org/wiki/USB_On-The-Go for details)
Just to give you more information, there was a nexus 7 kernel by flar2 called ElementalX which had OTG + charging support. He is working on ElementalX for Nexus 9 as well, and he said he may or may not add support for it. If you and maybe others are interested, I'm sure that it will get added upon request.
MWFD said:
As the title says, I want to charge my Nexus 9 while using a keyboard/mouse and other peripherals that I would have connected to the Nexus 9 through a USB hub. I know it is not always possible to charge through the hub, so I was thinking about something like a 'micro USB splitter" that expands the micro-USB port into 2 micro-USB ports: one for the charger that comes with the Nexus 9, and the second port for a OTG cable/usb hub/etc. Anyone have any thoughts on this?
I did read this post here for the Nexus 7 but not sure if the same is true for the Nexus 9.or if any additional options existed for the 9. Ultimately, I guess I'm wondering if it is unrealistic to expect to find something that charges the device at the same time as using a hub/OTG cable without too much modding or hassle? My device is rooted and I've flashed some mods and tweaked some things on previous devices I've had, but am by no means an expert so I would hope to keep the hacking/modding for something like this to a minimum, if possible. Plus, there's an outside chance I may return the Nexus 9 in the next week so I wouldn't want to get too crazy until I knew for sure I'd be keeping it.
I understand that a specific kernel with certain capabilities may be needed, but I'm unsure how to find out which kernel would work and if it would be compatible with stock ROM or CM12 (when it comes out). Any help would be greatly appreciated. Even if it's a pipe dream, I'd at least know not to continue to waste my time looking for a solution that doesn't exist
Click to expand...
Click to collapse
The company I work for is developing a OTG cable that does exactly that: lets you charge your phone/tablet while using a USB peripheral.
We are testing it in the UK market currently, but not selling in the US at the moment. You can check it out here: http://www.amazon.co.uk/Sansys-Char...F8&qid=1417298449&sr=8-1&keywords=usb+otg+mlc
We were thinking about doing a kickstarter or indiegogo for it, but not sure the amount of interest in a niche device like this.
Can you confirm that it is working on the Nexus 9? (and/or the Nexus 5)?
If it is, I'll order one immediately. I've been looking for such a thing since I had my Galaxy S2.
lfrst05 said:
Can you confirm that it is working on the Nexus 9? (and/or the Nexus 5)?
If it is, I'll order one immediately. I've been looking for such a thing since I had my Galaxy S2.
Click to expand...
Click to collapse
I can't confirm that it will work on the Nexus 9, but my partner from China is sending me a sample so I can try it out. I have a Nexus 9 and 5 also, and they'll be the first devices I will test it on.
We've also sent a couple out to some Youtube reviewers as well, so there may be a video review on them soon.
We just put up an Amazon US listing for this cable if any of you in the states want to try it out: http://www.amazon.com/dp/B00OLKFR44/
I should have one in hand in the middle of the week to test out.
mkygod said:
We just put up an Amazon US listing for this cable if any of you in the states want to try it out: http://www.amazon.com/dp/B00OLKFR44/
I should have one in hand in the middle of the week to test out.
Click to expand...
Click to collapse
I'm really excited to get my hands on one of these! let me know if it works.
mkygod said:
I can't confirm that it will work on the Nexus 9, but my partner from China is sending me a sample so I can try it out. I have a Nexus 9 and 5 also, and they'll be the first devices I will test it on.
We've also sent a couple out to some Youtube reviewers as well, so there may be a video review on them soon.
Click to expand...
Click to collapse
Sweet, this sounds awesome, let us know if it works :fingers-crossed:
mkygod said:
We just put up an Amazon US listing for this cable if any of you in the states want to try it out: http://www.amazon.com/dp/B00OLKFR44/
I should have one in hand in the middle of the week to test out.
Click to expand...
Click to collapse
This arrived from Amazon today. Unfortunately I can't get it to work. When the micro usb is plugged into the N9 it lights up blue. At that point I'm able to mount a thumb drive, use a mouse and Playstation controller. But once the other end is plugged into a charger the light goes off and whatever is connected stops working. The N9 begins to charge at that point. If plugged into my PC, same thing.
Note: the blue light goes off when other end is plugged in regardless of if anything else is in use.
BTW, running elementalX kernel and Lollipopalooza rom.
TSman74 said:
This arrived from Amazon today. Unfortunately I can't get it to work. When the micro usb is plugged into the N9 it lights up blue. At that point I'm able to mount a thumb drive, use a mouse and Playstation controller. But once the other end is plugged into a charger the light goes off and whatever is connected stops working. The N9 begins to charge at that point. If plugged into my PC, same thing.
Note: the blue light goes off when other end is plugged in regardless of if anything else is in use.
BTW, running elementalX kernel and Lollipopalooza rom.
Click to expand...
Click to collapse
I've heard some people say in certain other situations with OTG + charge, you need to plug everything in first, then plug the OTG cable into the device. Try that and see if it works?
saadi03 said:
I've heard some people say in certain other situations with OTG + charge, you need to plug everything in first, then plug the OTG cable into the device. Try that and see if it works?
Click to expand...
Click to collapse
Gave it a shot with this method but still a no go. Tried it on my phone as well with no luck.
TSman74 said:
Gave it a shot with this method but still a no go. Tried it on my phone as well with no luck.
Click to expand...
Click to collapse
Thats a bummer, thanks for the info.
Would we happen to need a kernel that supports simultaneous charging and data transfer? I bought a usb y cable and that only allows me to use one or the other. Which sucks .
Some devices have been known to work with only modified OTG cables such as galaxy tablets and experia phones.
What would this modification be?
I finally got a chance to test out these cables. I thought my first cable was busted so I ordered a 2nd one.
I'm VERY sorry to report that this cable does NOT support USB OTG AND CHARGING AT THE SAME TIME. It is not just your device.
Apparently, there was some miscommunication between me and by business associate in China that lead me to believe that this cable would function this way but it only functions as a USB OTG OR CHARGER CABLE. Language barrier didn't help since I do not speak Chinese and he does not speak English very well. If you read the description, the functionality of this cable is not very clear and obviously written by someone with English as a second language. And also, I can see how the photos can be misleading as well. He went and listed this product on our Amazon account to sell before he even sent me a sample for me to test out and I'm kinda mad at him for doing that.
I was pretty excited at the prospect of it doing OTG and charging at the same time, but now im dismayed that this cable cannot do it. This whole thing was a waste of time to try to bring a product like this to the US that bares little benefit other than being a 2 in 1 cable that can replace a regular USB OTG cable and a Charging cable (albeit a very short charging cable). Sorry that I got your hopes up guys
I do want to clarify exactly what this cable does though: Basically all it does is switch from Charging mode to USB OTG mode depending on how you have it plugged in. If you plug the cable into the mobile device only, the blue light will turn on, letting you know that you can use the USB OTG port. However, once you plug the other end of the cable into a charger, the blue light will turn off, and the cable goes into charging mode. The USB OTG port will not work or light up again until you remove the cable from your charger.
hey there everyone, i'm trying to understand this a bit more. i have the same cable, but my understanding is that it wont work unless the kernel supports it. does anyone know if this is possible to actually fix in the Nexus 9 kernel? i really need this for a project
I saw that the OnePlus 5T doesn't support HDMI to USB-C adapters, but maybe this has changed with the OnePlus 6? Is there any other way to connect the phone to your monitor? Cheers!
Chromecast
I don't think it support usb-c to hdmi, that the reason it prevent me getting op6. According to gsmarena' s specs it use the slow usb 2.0 type c. I want to play emulators on big screen so casting doesn't cut it. On ly a few flagships from Huawei, Samsung, LG, Google support usb type c 3.1
nope just tested it, doesn't work.
If is real ! It's a bad news !!!
Any solution ?
use displaylink adapters. have a look at the op5 section on xda. its discussed there and there are good solutions. usb 2.0 sucks anyway. will wait for the next gereration and hope they change the usb chip
As in topic, does asus zenfone 6 have ability to stream out video through usb to hdmi adapter?
After some time android q will come to this device and it will contain native desktop mode so i would like to use it.
I'd like to know the answer as well.
Is it USB 3+ that can do video over type C?
For example One+ 6 has only USB 2.0 over type C, and doesn't support video, while Samsung has USB 3.1 over type C as expected that supports video over type C.
Sure simple type C to HDMI adapter will be needed.
I wasn't able to find any specs for Zen6 type C at all.
any one knows?
mikek753 said:
I'd like to know the answer as well.
Is it USB 3+ that can do video over type C?
For example One+ 6 has only USB 2.0 over type C, and doesn't support video, while Samsung has USB 3.1 over type C as expected that supports video over type C.
Sure simple type C to HDMI adapter will be needed.
I wasn't able to find any specs for Zen6 type C at all.
any one knows?
Click to expand...
Click to collapse
According to GSMarena it's 2.0.
I looked at the USB diagrams and it appears that alternate modes over USB-C use the same pins as SuperSpeed meaning that you can't have alternate mode without the other (but not vice versa).
Unless I'm missing something, there shouldn't be any display mode. However I'm not sure if the GSMarena data sheet is accurate.
I currently have sony xperia z3 compact which has usb 2.0 (micro usb, but this doesn't make change IIRC) and also support mhl (see gsmarena https://m.gsmarena.com/sony_xperia_z3_compact-6538.php). In my opinion it doesn't depend on version of usb which device is equiped with, at least it 's not the main reason for not supporting mhl. The question is, does mhl work on zenfone 6 with (potentially, because i couldn't find any information on asus website) usb 2.0 type c connector?
pawloland said:
I currently have sony xperia z3 compact which has usb 2.0 (micro usb, but this doesn't make change IIRC) and also support mhl (see gsmarena https://m.gsmarena.com/sony_xperia_z3_compact-6538.php). In my opinion it doesn't depend on version of usb which device is equiped with, at least it 's not the main reason for not supporting mhl. The question is, does mhl work on zenfone 6 with (potentially, because i couldn't find any information on asus website) usb 2.0 type c connector?
Click to expand...
Click to collapse
Display output via microusb worked differently as the regular port does not have the pins or bandwidth for it. I had an LG G2 which could also output a display signal. I think it's possible to do the same via USB-C but at the same time I think it's simpler to use alternate mode hence the conclusion I came up with. If I have the time I'll go digging around some more later.
I opened a ticket with ASUS support and they state none of the models they currently sell (including Zenfone 6) cand output HDMI over usb-C.
they might be stupid though, because ROG phone does.
apoklyps3 said:
I opened a ticket with ASUS support and they state none of the models they currently sell (including Zenfone 6) cand output HDMI over usb-C.
they might be stupid though, because ROG phone does.
Click to expand...
Click to collapse
It seems we have to wait untill somebode actually try connecting it to tv to be sure that it doesn't support hdmi output.
pawloland said:
It seems we have to wait untill somebode actually try connecting it to tv to be sure that it doesn't support hdmi output.
Click to expand...
Click to collapse
I looked at a few things and I think I was correct in my first post. While I think it would be technically possible to implement MHL on USB-C like they did on MicroB (it would just piggyback off the necessary pins like it used to do), it doesn't seem like it would make sense to do that and I can't find an adapter/cable that would work in that scenario so you'd need 3.1 because they all require Alternate Mode support. However Alternate Mode is an optional spec so just because a device supports 3.1 doesn't mean it'll support display functionality.
I should also note that the ROG Phone has USB-C 3.1 according to GSMArena.
Another note is that it appears that MHL officially lists MHL as working on USB-C via Alternate Mode.
Meanwhile ASUS launching an external display that is advertised to support input from a mobile phone, but hey, no their latest flagship. they are so dumb they are launching devices that don't their other devices..
why would anyone cheap on using usb2.0 connector, when internally SD855 supports 3.1 and so does UFS2.1, is beyond me. It must save la 0.something to use 2.0 instead of 3.1
pawloland said:
It seems we have to wait untill somebode actually try connecting it to tv to be sure that it doesn't support hdmi output.
Click to expand...
Click to collapse
Test on LG 27uk850W, not working, just charging
Xtr3m3ro said:
Test on LG 27uk850W, not working, just charging
Click to expand...
Click to collapse
Have you connected it to tv using usb-c/hdmi adaprer or just by usb cable?
No native HDMI output for my device using usb-c to hdmi cable.
However I think the Asus portable monitor thingy they announced at computex actually supports data over usb to transfer the image.. but I am not sure at all.
mikek753 said:
I'd like to know the answer as well.
Is it USB 3+ that can do video over type C?
For example One+ 6 has only USB 2.0 over type C, and doesn't support video, while Samsung has USB 3.1 over type C as expected that supports video over type C.
Sure simple type C to HDMI adapter will be needed.
I wasn't able to find any specs for Zen6 type C at all.
any one knows?
Click to expand...
Click to collapse
The OnePlus 6 does support HDMI out with a DisplayLink adapter. It's not great though, as you can't charge it at the same time and it runs the battery down incredibly fast, less than two hours.
Thanks for confirming it, it's a real downer situation though, I was really expecting to have the possibility to output videos through HDMI and potentially do the same with emulators + bluetooth joysticks (since it can handle even gamecube/wii games thanks to the SD855)
hack.causality said:
The OnePlus 6 does support HDMI out with a DisplayLink adapter. It's not great though, as you can't charge it at the same time and it runs the battery down incredibly fast, less than two hours.
Click to expand...
Click to collapse
IIRC video output via Displaylink adapter works on every device if it can install displaylink app. Displaylink support doesn't depend on mhl support on specific device. I'm just to clarifying for internet strangers.
gnrsenpai said:
Thanks for confirming it, it's a real downer situation though, I was really expecting to have the possibility to output videos through HDMI and potentially do the same with emulators + bluetooth joysticks (since it can handle even gamecube/wii games thanks to the SD855)
Click to expand...
Click to collapse
I'm right there with you buddy. I was so used to MHL that I never questioned whether newer phones would support it or the type-c equivalent. Trying to find a SD855 phone that charges while outputting video is hard enough, let alone one that's rootable with a headphone jack and a non-curved screen (my preference). I'm beginning to think we're going to have to wait until the holiday season when the ROG Phone 2 comes out. In the meantime I'm half-satisfied by using my tablet (shield) hooked to a monitor and keeping my emulator folders synced with my phone with Dropbox/SyncThing.
pawloland said:
Have you connected it to tv using usb-c/hdmi adaprer or just by usb cable?
Click to expand...
Click to collapse
usb-c cable, i use that cable for macbook to have second monitor, and charging
hack.causality said:
I'm right there with you buddy. I was so used to MHL that I never questioned whether newer phones would support it or the type-c equivalent. Trying to find a SD855 phone that charges while outputting video is hard enough, let alone one that's rootable with a headphone jack and a non-curved screen (my preference). I'm beginning to think we're going to have to wait until the holiday season when the ROG Phone 2 comes out. In the meantime I'm half-satisfied by using my tablet (shield) hooked to a monitor and keeping my emulator folders synced with my phone with Dropbox/SyncThing.
Click to expand...
Click to collapse
please, let me know when you find such phone, which :
is rootable, unlocked bootloader
video output to HDMI, with charge if possible
headphone jack
mikek753 said:
please, let me know when you find such phone, which :
is rootable, unlocked bootloader
video output to HDMI, with charge if possible
headphone jack
Click to expand...
Click to collapse
Nubia red magic 3 is your best best. It doesn't support HDMI output yet but apparently they've said they may support it in a software update. It has USB c 3.1. Also 90hz screen, headphone jack, 5000ma battery, SD 855, it even has a CPU fan lol. It's newly out but I think you can install twrp and root it but customs ROMs might be few if any. It's the closest phone I've found to meeting my needs of 3.5mm, SD 855 and HDMI. Only thing it's missing is expandable really.
---------- Post added at 09:43 PM ---------- Previous post was at 09:41 PM ----------
mikek753 said:
please, let me know when you find such phone, which :
is rootable, unlocked bootloader
video output to HDMI, with charge if possible
headphone jack
Click to expand...
Click to collapse
Specs
https://m.gsmarena.com/zte_nubia_red_magic_3-9692.php
Oh, and it's only £410.......
Hi, any news? Has anyone bought a displaylink product and used it working with the Zenphone 6?
Hey guys, I'm fixing to refunction an original Pixel as a 3D printer server (Octoprint), and OTG works a treat, however I cannot keep the phone charged while using OTG.
Is there a working solution for this? I don't mind getting my hands dirty.
Thanks y'all.
It's a bit finicky, you just have to find the right usb-c hub that supports charging and OTG.
one thing I noticed was the usb-c hub I am using supports passthrough PD charging (your pixel stock charger is a PD charger). if your usb-c pd charger power output is too high, i think it might run into issues with the hub.
by chance, my usb-c hub that supports passthrough PD charging is paired with a generic charger.... both the charging and OTG function may sometimes take a few connection attempts to get it working.... trying different combination of plugging in the charger to the hub, OTG device (i use a microsdxc card reader) and plugging into the pixel.
all i can say is good luck!
WhereCoffeeFlowsLikeMud said:
Hey guys, I'm fixing to refunction an original Pixel as a 3D printer server (Octoprint), and OTG works a treat, however I cannot keep the phone charged while using OTG.
Is there a working solution for this? I don't mind getting my hands dirty.
Thanks y'all.
Click to expand...
Click to collapse
hey just wanted to say, funny I should find this thread because I'm trying to achieve the exact same thing (Octoprint server) with an old Galaxy Note 4, and can't for the life of me figure out why OTG charging/data would be disabled. Did you manage to figure out a fix?
peanutismint said:
peanutismint said:
hey just wanted to say, funny I should find this thread because I'm trying to achieve the exact same thing (Octoprint server) with an old Galaxy Note 4, and can't for the life of me figure out why OTG charging/data would be disabled. Did you manage to figure out a fix?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Alas, nope - not without soldering directly to the main board. I just gave AliExpress $15 instead and they gave me a Rockchip-based MXQ Pro Android TV box in return (that sits under my printer). I parked Armbian Linux on it, then plugged in a webcam. Working like a dream. Thinking of switching to Klipper at some point, so going the TV box route was probably for the best (on account of the 4 CPU cores, loadsa RAM and internal storage, and the four or five USB ports).
Ps, sorry about the formatting - my phone flipped out cos of some annoying ad.
Thanks for the response; it's unfortunate that a solution like Octoprint 4 Android would be rendered almost pointless by something as assumedly simple as 'device can't charge via USB'.
I have a Raspberry Pi that I can probably get Octoprint running on with a cheap webcam, but I'm going to google that Android TV box you mentioned too because a few other people have mentioned that these are somehow even better/more future-proof than a RPi.