Database Info

Kaiser WM6.1 Portuguese ROM

Hi everyone,
I have a Kaiser with WM6.1 in English and want to update it to Portuguese.
Can you please tell me where I can find a good Portuguese ROM (the original one would be great!).
Thanks.

To do that, you must first of all to CidUnlock and HardSpl your Kaiser
Read this: http://forum.xda-developers.com/showthread.php?t=433835
You are not able to change your device language without that
Please read carefully and i you have any questions please use that thread
After you can flash any ROM that you like, and I will point you to the TMN Portuguese ROM

Hello Pisca,
I've already CidUnlock and HardSpl my Kaiser with success.
Can you please point me to the portuguese ROM?
Thank you for your fast help!

Ok, se está tudo conforme tens aqui a ROm oficial TMN WM 6.1
http://www.4shared.com/file/7968946...4002_1651756_Ship.html?dirPwdVerified=a4a0d99
Espero que tudo corra bem
Boa Sorte

Muito obrigado,
Já agora, pelo facto desta ser a da TMN não quer dizer que o PDA volte a ficar bloqueado pois nao?
Mais uma vez obrigado

I don't think so, but you may verify after

Já agora "offtopic" eu tenho a rom 6.1 portuguesa da tmn, posso mudar para qualquer uma que esteja aqui no forum? continuo com o pda em português? Sabem de algum tutorial em português para flashar rom´s?
Desde já obrigado

Hi.
Pisca, thanks for your help. Everything went OK.

Great
You may change to any other ROM that you like, please verify first if Hardspl is OK (bootloader mode)
Please note that Portuguese ROMS in this forum are a bit older, if you flash another recent ROM they are generaly English based and your devide language will change
Translate a ROM is a cooking process, so only if one of the cookers decide to do it we may get it
As far as I know there no tuturials in PTG to flash a ROm, but once you do it one time is quite easy to do it again
Feel free to ask, if I can answer

Pisca,
I know this is completly offtopic, but dou you have any knowledge on Trinity's? I'm trying to install a cooked rom but I need some help. You can answer my post in here -> http://forum.xda-developers.com/showthread.php?t=436941&page=13.
Thanks again.

Thank´s Pisca, I´ll try it

Portuguese ROM TyTN II, migration to Android, Brazil
GeracaoXXI said:
Hi everyone,
I have a Kaiser with WM6.1 in English and want to update it to Portuguese.
Can you please tell me where I can find a good Portuguese ROM (the original one would be great!).
Thanks.
Click to expand...
Click to collapse
My friend has a TyTN II Kaiser120 in Brazil and I'd like to prep the files for her phone to do the same as I have... VaniljEclair on SDcard.
rom *1.88.514.1 PTB 02/01/08
radio 1.27.15.21
protoc 22.51.88.13H
WM6.0
I'm waiting to hear back on the SN of a TyTN II... but I figured out from
h t t p : / / ip208-100-42-21.static.xda-developers.com/showthread.php?p=6336342&highlight=Portuguese#post6336342
that HT750GB14164 is the SN for "Portuguese" ROM and put that in here
w w w .htc.com/www/supportdownload.aspx?p_id=13&cat=2&dl_id=21
which downloaded this file
\HTC TyTN II\WM6.1_MR2\RUU_Kaiser_HTC_PTG_3.28.410.0_radio_s ign_25.83.40.02_1.65.17.56_Ship.zip
It unpacked to
WM61_PPC_NewFeaturesGuide_Generic_EuPortuguese_051 5.pdf
RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40. 02_1.65.17.56_Ship.exe (July 2, 2008, 64.8 MB)
Concerns:
- That this is a "European" Portuguese version, and not Brazilian, dunno if there's a difference... where on the WM6 phone can I read the exact ROM version? Some magical keys held down while starting?
- Will this ROM make the Portuguese keyboard on the TyTN II work right?
- Assuming this updates the phone to WM6.1, what kind of backups and differences will there be... Contacts being most important to preserve. It wipes the whole thing, right, so they'd need to be backed up to .csv file, I guess.
Anyone in Brazil using Android on TyTN II?
Qualquer um no Brasil com Android no TyTN II?
Qual a versão do Android que você gosta de correr a partir do cartão SD e Haret no TyTN II?
I'd like to put VaniljEclair on it.
Thanks for reading

[Q] ClockworkMod downgrade - how to?

Hi xdall !
How to revert to ClockworkMod version 2.5.1.8? It was installed by 2ndInit 1.42, but after installing Quarx CyanogenMod 7 b6, ClockworkMod been updated to version 3.0.0.5. Some fixes, as Swype for example, are not applied with ClockworkMod 3.0.0.5, for the reason that the version of the script is old.
Sorry for bad, bad, google translator English. Greetings from Brazil (my first post) and thanx in advance.

Hey,
I know this sucks, I couldn't get any zip updates to work either. Go here for an explanation on how to convert 2.5 zips to 3.0 zips that will work on CWM3... This is what I have been doing to install stuff on CWM3.
http://forum.androidcentral.com/epic-4g-rooting-roms-hacks/68124-how-converting-creating-cwm2-cwm3-files-step-step.html
I couldn't find any solutions on this problem here by the way. Maybe It is there and maybe it isn't but boggles my mind how something so frustrating still doesn't have a sticky on the top of the development forums.
<in portuguese>
Fala cara, vai neste site aqui e converte os zips de 2.5 pra 3.0. Eu fiz essa parada pra eles serem compatíveis, foi o jeito mais fácil que eu encotrei pra resolver o problema. Eu também tava no CM7...
http://forum.androidcentral.com/epic-4g-rooting-roms-hacks/68124-how-converting-creating-cwm2-cwm3-files-step-step.html
Valeu, abs,
André

You could install all your zip's through bootmenu 1.4_2 too (after apply CM7, flash gapps, swype, gps_fix, etc), do that next time you install CM7.

Hey,
How do I log into bootmeny 1.4_2? Is it that shell app that comes with CM7?
Cheers,
André

Thank you for explanation, guys. I'll try here.
PS: André, obrigado pela tradução em português. Mas pode escrever só em inglês que eu leio tranquilo. Meu problema é para redigir os textos mesmo .

to change CWM recovery : just replace recovery binary file in
/system/bootmenu/recovery/sbin
take care of file permissions

alright i knew that was cm7 purposes of the extraction point

Hey Epsylon, what kind of permission do I need to take care of, after I put the file there?
Thanks!
Ps: cheers Alediniz ;-)
Sent from my MB525 CM7

The file permission should be: rwxr-xr-x (755)

[Q] Lg 3d not working

Ingles:
My LG 3d opimus not connect again, it shows the LG logo and then goes black and does not start, do not know what that means any help would be good, not found anything like it in other forums
portugues:
Meu LG opimus 3d nao liga mais, ele mostra o logo da LG e depois fica preto e nao inicia, nao sei o q fazer, qualquer ajuda seria bom, nao encontrei nada parecido em outros forums.

what did you do .. did you flash it to a new rom..?

Kasvinda said:
what did you do .. did you flash it to a new rom..?
Click to expand...
Click to collapse
tradusido google translator
I tried to put a new rom, but when I install it and not restarted nothing showed up, my colleague recovered the device somehow, but I was wondering the same resolve it when it goes already I'm noob

me also
hiiiiiiiiiiii me also i have a same problem soo what i do please help fast .................

Hopefully you made a back up, if so go into recovery and restore from your backup. If not, try going into recovery and mount your SD card from there, then load another ROM and flash that.
Sent from my LG-P920 using xda app-developers app

[Q] Stock apps or ROM to XOOM 2 ME MZ607 (wifi) BRAZIL

(From Brazil)
Hello guys, first time I used my xoom, I get nasty and removed lots of stock apps that came with him. I cannot provide all the apps that has been removed because I have no idea. But one of them its the Citrix receiver.
Yesterday I received the message that a new upgrade is avaliable (ICS 4.0.4) from Motorola. Ok, I was happy but it takes short time, I couldn´t install the update. (It was rooted by the method of Dan). I emailed him and he sen´t me the unroot kit, it do worked but....
before the unroot, I alread had made an Factory reset, but the apps removed wasnt there. So I tried the method of put the .zip on the SDCard and applying an update by the recover. So this method says to me that there is an error - apply patch check ... citrixreceiver. and I cant update in this way also.
So after I made a Factory reset, the message from Motorola about the update isnt showing anymore even if I look for updates.
My question is, Should I put back all the apks removed or Its best I install a stock rom? Any clues?
Tablet is MZ607 wifi
System version 1.272.15.MZ607.Brasil.en.BR
Android Version 3.2.2
Firmware GAS_LA_TABLET1FLEMWIFIRETBR_P019
Kernel 2.6.35.7-gcc60dc3 [email protected] #1
N. Version 1.6.0M_272.15_MZ607

thlobato said:
(From Brazil)
Hello guys, first time I used my xoom, I get nasty and removed lots of stock apps that came with him. I cannot provide all the apps that has been removed because I have no idea. But one of them its the Citrix receiver.
Yesterday I received the message that a new upgrade is avaliable (ICS 4.0.4) from Motorola. Ok, I was happy but it takes short time, I couldn´t install the update. (It was rooted by the method of Dan). I emailed him and he sen´t me the unroot kit, it do worked but....
before the unroot, I alread had made an Factory reset, but the apps removed wasnt there. So I tried the method of put the .zip on the SDCard and applying an update by the recover. So this method says to me that there is an error - apply patch check ... citrixreceiver. and I cant update in this way also.
So after I made a Factory reset, the message from Motorola about the update isnt showing anymore even if I look for updates.
My question is, Should I put back all the apks removed or Its best I install a stock rom? Any clues?
Tablet is MZ607 wifi
System version 1.272.15.MZ607.Brasil.en.BR
Android Version 3.2.2
Firmware GAS_LA_TABLET1FLEMWIFIRETBR_P019
Kernel 2.6.35.7-gcc60dc3 [email protected] #1
N. Version 1.6.0M_272.15_MZ607
Click to expand...
Click to collapse
Opa amigo td bem sou do brasil tambem, o android 4.0.4 ja esta disponivel para os tablets comprados na euroap!? sabe me informar, to pesquisando pq pretendo comprar o meu (minha irma0 na europa amanha, e queria saber, tem roms customizadas para o mz607? Root ja tem!?
abs

Brazil
Ja saiu para o MZ607 o ICS (4.0.4), vc tem que saber qual é o modelo do xoom para saber se está disponivel. Nao sei qual é o modelo na europa.
flip00 said:
Opa amigo td bem sou do brasil tambem, o android 4.0.4 ja esta disponivel para os tablets comprados na euroap!? sabe me informar, to pesquisando pq pretendo comprar o meu (minha irma0 na europa amanha, e queria saber, tem roms customizadas para o mz607? Root ja tem!?
abs
Click to expand...
Click to collapse

Nubia X MokeeOS not entirely working

What I have done already:
-Flashed TWRP on Nubia X
-Kind of Flashed MokeeOS custom ROM
-Flashed GApps
-Flashed SuperSU
I bought my Nubia X from CECT Shop in 2018 and it was already Flashed with GApps.
The OEM update function didn't work from the beginning.
I have NubiaUI v2.16 installed but for MokeeOS i would need at least v3.05.
Anyone can help me here?
It seeems to me that the original packages released by nubia are just to update but not to install completely new.

What's not working on mokee?

I can't receive nor send SMS.
Also it appears to me that the Phone can't succesfully update the SMSC.
I have tried typing in the combination *#*#4636#*#* and selected "update SMSC" it just says "update error"
Also I had to edit an meta file in the zip to flash mokee overall. It clearly is not designed to work with the NubiaUI lower than v3.05.
But im still trying to understand what this NubiaUI is doing. Is it still present even if i will flash an completely new OS?
Is it right to call it firmware? if it is still present, what's its job?

You go back to stock now?
Maybe if you go back using https://www.getdroidtips.com/zte-nubia-x-stock-firmware/ you can update after that

I actually tried that, but this recovery tool keeps telling me that it works with every nubia Phone except for Nubia X, Redmagic 5G and Z20 so its useless. These zip files cant be flashed with TWRP also.
I think if there is no fix i will stick to my setup right now as it works very well.
The only things I miss are working SMS and the ability to turn off visibility for Bluetooth.
Is there a way to implement that bluetooth thing?

I do not remember why, i think sometime i didn't receive sms but i use a third party sms app, chomp sms for me. Don't forget to unoptimize battery for the app(maybe it's the problem with the mokee app)
And for Bluetooth
Setting /security and loc /loc /advanced option /search

Help me! [Me ajudem!]
Mod edit - Translated by https://www.deepl.com/translator:
Good evening, I'm new here and I'd like a hand.
I have a Nubia x NX616J, JOS V.2.0, V3.18.
And I intend to do Root to modify the Rom, and be able to access google gaaps.
My doubt is, in this modified room, the functionalities of the device, sum?
Example: change to smaller screen, option of the gamer to add R/L with the smaller screen? Among others....
Or just lose some, and which ones?
I also saw a tutorial that gives to Root and Cellular and put the gaaps, but was in another device of the nubia, but I believe you can do in the nubia X. Help me!
********************************
Boa noite sou novo aqui e gostaria de uma ajuda.
Tenho um Nubia x NX616J, JOS V.2.0, V3.18.
E pretendo fazer Root para modificar a Rom, e poder ter acesso ao gaaps da google.
Minha duvida é, nessa Room modificada, as funcionabilidades do aparelho, somem?
Exemplo: mudar para tela menor, opção do gamer de adcionar R/L com a tela menor? Dentre outras....
Ou so perde algumas, e quais?
Vi tambem um tutorial que da para Enraizar e Celular e colocar os gaaps, porem foi em outro aparelho da nubia, mas acredito que dê para fazer no nubia X. Me ajudem! : D: D: D

Isaque1991 said:
Mod edit - Translated by https://www.deepl.com/translator:
Good evening, I'm new here and I'd like a hand.
I have a Nubia x NX616J, JOS V.2.0, V3.18.
And I intend to do Root to modify the Rom, and be able to access google gaaps.
My doubt is, in this modified room, the functionalities of the device, sum?
Example: change to smaller screen, option of the gamer to add R/L with the smaller screen? Among others....
Or just lose some, and which ones?
I also saw a tutorial that gives to Root and Cellular and put the gaaps, but was in another device of the nubia, but I believe you can do in the nubia X. Help me!
********************************
Boa noite sou novo aqui e gostaria de uma ajuda.
Tenho um Nubia x NX616J, JOS V.2.0, V3.18.
E pretendo fazer Root para modificar a Rom, e poder ter acesso ao gaaps da google.
Minha duvida é, nessa Room modificada, as funcionabilidades do aparelho, somem?
Exemplo: mudar para tela menor, opção do gamer de adcionar R/L com a tela menor? Dentre outras....
Ou so perde algumas, e quais?
Vi tambem um tutorial que da para Enraizar e Celular e colocar os gaaps, porem foi em outro aparelho da nubia, mas acredito que dê para fazer no nubia X. Me ajudem! : D: D: D
Click to expand...
Click to collapse
XDA Forum Rules (excerpt):
...
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
...
Click to expand...
Click to collapse

ui.nubia.cn/rom/detail/58

Tom04 said:
I actually tried that, but this recovery tool keeps telling me that it works with every nubia Phone except for Nubia X, Redmagic 5G and Z20 so its useless. These zip files cant be flashed with TWRP also.
I think if there is no fix i will stick to my setup right now as it works very well.
The only things I miss are working SMS and the ability to turn off visibility for Bluetooth.
Is there a way to implement that bluetooth thing?
Click to expand...
Click to collapse
We are in the same situation .my Nubia X is on mokee custom rom and I want to flash the original official china stock rom .twrp is not supporting update.zip file and unfortunately I can not find zip file only not update .zip file