Database Info

Tempered Glass w/Bumper?

Has anyone been able to apply a tempered glass screen protector and use the included bumper? Tried with mine but the bumper seems to push up on the screen protector from the edges..

I have a tempered glass protector on mine with the bumper without any issues, but the glass protector had terrible halo effect. Almost all do because this has a slightly curved screen like the Nexus 6 and manufacturers didn't account for it. Probably going to be a couple weeks before they start to release ones that don't lift up in the corners..

Same with me, terrible halo effect on left and right edges. (For those who don't know what this mean, it just means that the screen doesn't fit flush to the screen due to the curvature of the phone, and appears as if a giant bubble stretches around the whole screen protector's edges as if it looks like the screen protector is surrounded by a halo)
Sent from my XT1575 using XDA Free mobile app

MajorasCurse said:
Same with me, terrible halo effect on left and right edges. (For those who don't know what this mean, it just means that the screen doesn't fit flush to the screen due to the curvature of the phone, and appears as if a giant bubble stretches around the whole screen protector's edges as if it looks like the screen protector is surrounded by a halo)
Sent from my XT1575 using XDA Free mobile app
Click to expand...
Click to collapse
thats exactly what i was getting, but when i removed the bumper, the screen protector was good. Now im just worried about walking around with absolutely no protection from drops. first tempered glass screen protector and im loving it, but i think the only other alternative is a regular oleophobic protector

The skinomi glass protector actually fits very well with the bumper. I was initially annoyed about it being too small (width is just the size of the actual display, so it requires some precision/multiple attempts to align it right, best done with the bumper on). However there is no haloing on the sides, just some on the ears around the speakers, mostly the bottom, and the bumper doesn't interfere with it.

Anyone got the Atfolix Hybrid Glass Screen protectors for the Mix?

These are German made hybrid screen protectors made of anti-shock plastic substrate and tempered glass. Have used them on a few other devices and they are excellent. Slightly pricey as they are German made but definitely worth checking out. Just ordered mine today. They also include a protector for the back in the package.
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
As of now, I've ordered a few screen protectors, the full coverage ones found on ebay, which seems to affect touch functionality and the cheaper standard tempered glass protectors.
Waiting for the FX Glass protectors to arrive. Will update when I receive it.
Do let me know when anyone already has these.

I ordered a "full cover" one with the black border. (https://www.amazon.com/gp/product/B01MQLV04B)
I does not look promising. Reviews say its only sticky around the edges, so sensitivity is an issue.
I can't understand why there are no standard style protectors available.
That hybrid one looks closest to them, and seems promising.

THINK this is just another ordinary "not full coverage" glass.

Constrabus said:
I ordered a "full cover" one with the black border. (https://www.amazon.com/gp/product/B01MQLV04B)
I does not look promising. Reviews say its only sticky around the edges, so sensitivity is an issue.
I can't understand why there are no standard style protectors available.
That hybrid one looks closest to them, and seems promising.
Click to expand...
Click to collapse
The hybrid as the name suggests is a hybrid between plastic and glass. This makes the film as flexible as a plastic film but the layer which you touch is glass, hence very high resistance to scratches. They claim 8H and I have bought their protector for another device earlier and I can say from experience that its great! And its German made! And apparently they have very positive reviews everywhere. I just happened to know about them recently, maybe because I used to buy those cheap 3-4dollar tempered glass films from China which would do the job and were usually as good as the more expensive ones for "flat" displays.
I still haven't received any of the screen protectors I've ordered for the mix. But from what users are saying on this forum, the full-coverage version with the black borders are pretty much unusable due to poor touch. And the regular tempered glass ones cover just the viewing area. But I guess this is already a very well known fact that its hard to find full coverage tempered glass protectors for 2.5D curved displays. Almost every screen protector which promise full coverage only has adhesives around those borders and the glass barely touches the display which causes a significant loss in touch functionality.
Even the Atfolix protector only covers the viewing area. But what makes them different from the cheap regular tempered glass is resistance to shock. Most regular tempered glass protectors crack during shock. But these being hybrids are more resistant to shocks.

satishp said:
Even the Atfolix protector only covers the viewing area.
Click to expand...
Click to collapse
What does that mean?
It doesn't cover the bottom camera bezel?

ChodTheWacko said:
What does that mean?
It doesn't cover the bottom camera bezel?
Click to expand...
Click to collapse
As far as what I've read, it covers the bezel around the camera. But the protector is cut slightly smaller than the display glass meaning its not a full-coverage type protector. This is most likely done to ensure that the protector adheres properly to the 2.5D display glass.
So it does cover the bezel area but doesn't reach the rounded edges of the display. Hope this helps.
I have received a case and screen protector today and have uploaded pictures here. Have more cases coming in and will update as I receive them.
Hope you can also help by posting photos of the case and screen protector you are using in that thread. It will help other buyers.
Cheers!

@satishp Any updates with that screen cover?

Constrabus said:
@satishp Any updates with that screen cover?
Click to expand...
Click to collapse
Haven't received them yet. They shipped it via a slow shipping service called PostNL.
I can recommend this full coverage protector I got from ebay though.
No newton rings, no issues with touch and its a perfect fit.
Ebay Item: 172369729447
This is based on my own experience with the item. As long as you perfectly install the protector, you shouldn't have any issues at all.
I have already posted photos here with the protector applied. Check it out.

I wonder why isn't there a full screen glass cover for the mix. The screen is curve at the edges but manufacturers should be able to do this right?

jaime4272 said:
I wonder why isn't there a full screen glass cover for the mix. The screen is curve at the edges but manufacturers should be able to do this right?
Click to expand...
Click to collapse
There are full coverage protectors like the one I've recommended above. If you're referring to fully transparent full coverage protectors, I guess they dont make them because it shows those air gaps around the borders when applied to a 2.5D curved display like the one on the Mix. The ones with the black borders dont show this and are preferred by most users. Its better than seeing those ugly air gaps which arent uniform.

I did try that one you are referring to but I had to return it because of the rainbow effect and touch issues. ho well.

jaime4272 said:
I did try that one you are referring to but I had to return it because of the rainbow effect and touch issues. ho well.
Click to expand...
Click to collapse
I guess there are a few variants of the screen protector coming from different factories. This is why I specifically mentioned the Ebay Item ID. I do not get any issues with this one. I ordered two of them. Had to dispose off one as I noticed some stubborn dust stuck under the first one.
Applied the second one now.
I can confirm that I don't see any newton rings (rainbow effects), no issues with touch functionality either. I didn't experience these issues with the first one either.

Ok. Good to hear, I would like to have an all clear instead of having black adages and bottom chin. If one exist.

Try
Nexus 5

jaime4272 said:
Ok. Good to hear, I would like to have an all clear instead of having black adages and bottom chin. If one exist.
Click to expand...
Click to collapse
Unfortunately a transparent full-coverage one doesn't exist due to the edge-less design. If you have used transparent tempered glass screen protectors on devices with 2.5D curved screens before, you may have noticed that the corners don't adhere to the screen causing a border of air to form around the protector.
This is the reason why full-coverage protectors have colored borders around the viewing area. It hides those ugly air gaps around the display.
There are transparent protectors available. The Atfolix Glass protector is a transparent one, higher quality than the regular Chinese tempered glass protectors. But it doesn't cover the whole display like all the other transparent protectors available for the Mix.

I understand that, but what I was saying is that they could make them without the black edges and leave it all crear.

Xiaomi's original tempered glass
I bought Xiaomi original tempered glass but now in the middle of my screen I have like an oily colored stain. Of course it's not oil but I think there is air between my screen and the tempered glass. Doesn't the tempered glass contain holes for the sound? I hope it's not my screen. But when I turn of my device I can see it too so I really think it's the tempered glass. Need a new one! Ordered one so we'll see.

i bought this one FX-Hybrid-Glass Panzerglasfolie Xiaomi Mi Mix Glasfolie Panzerglas from
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and it looks better than any previous one i have bought before.

jaime4272 said:
i bought this one FX-Hybrid-Glass Panzerglasfolie Xiaomi Mi Mix Glasfolie Panzerglas from
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and it looks better than any previous one i have bought before.
Click to expand...
Click to collapse
Is it covering the active part of the display completely? If not you normally have a halo effect on the left and right side of the protector. With the Mix maybe on the top side too. If the product pictures are real it is not. But well, if it is i'll order one too. The fullscreen ones i've tested are crap.
---------- Post added at 10:09 AM ---------- Previous post was at 10:04 AM ----------
liobeir said:
I bought Xiaomi original tempered glass but now in the middle of my screen I have like an oily colored stain. Of course it's not oil but I think there is air between my screen and the tempered glass. Doesn't the tempered glass contain holes for the sound? I hope it's not my screen. But when I turn of my device I can see it too so I really think it's the tempered glass. Need a new one! Ordered one so we'll see.
Click to expand...
Click to collapse
I've tried the Raugee and the Imak protector. Both show the same effect. The problem is that these fullscreen protectors only stick on the edges. The air layer between the display glass and the protector causes this oily rainbow effect. Depending on the phones and the surroundings temperature it's more or less visible.

jaime4272 said:
i bought this one FX-Hybrid-Glass Panzerglasfolie Xiaomi Mi Mix Glasfolie Panzerglas from
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and it looks better than any previous one i have bought before.
Click to expand...
Click to collapse
Can you post pictures of this one please. My order got cancelled due to some processing delay. If this is good, I'll place another order.

IMAK Glass screen protector

I just received my IMAK glass screen protector. Purchased this on AliExpress. Here are some photos of it and how I installed it. I used the 3 stickers to make a hinge after it's positioned correctly. That way I just have to remove the backing and then stick it. I'll just seperate my review into pros and cons.
Pros:
-The screen protector fits nicely. I chose this one because it has the little speaker cut out on top.
-It feels good because it is glass.
-It protects the screen well because it is glass.
Cons:
-It is glass so it has some thickness to it.
-Holds fingerprints more than screen itself
-It has a little orange peel so it's not crystal clear. You can see in the picture of the reflection of the light that it looks a little muddy instead of mirror like.
Overall, it's good for the price, but not perfect. Personally I'm back and forth between glass and film screen protectors. I'll give this a try for a few weeks and then make a final decision.
https://flic.kr/p/YVQY5o https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/YiqUeK https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/YiqRJz https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/ZgR8h3 https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/Zfqq6y https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/ZfqmJd https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/YVQPHJ https://www.flickr.com/photos/[email protected]/

Those guiding stickers are ingenious, never seen them before and the idea is just so simple and clever!!
Perfect, I know what I have to do when my phone and Nillkin protector arrive.
Thanks for sharing.

That is a lot nicer than the Riffue Tempered Glass screen protector I bought on Amazon. This one is thin and has a good height but is several mm too narrow, it doesn't even cover the LCD display let alone the entire screen/glass.

the one i order covers like half of the screen lmao wtf
just ordered one like yours.

I had one similar too this, but the dust collected over front camera under the glass.
It has some glue on it, does this IMAK one used static?

Here is a link to the one i bought.
I tried many different ones but for me this is the best.
The coating is very good against fingerprints. It fits perfect on the screen.
The sides of the screen are a little bit curved down which is good for the dust.
Updated link https://www.aliexpress.com/item/Ima...lgo_pvid=6f18e507-ed27-486a-869e-418c35f3a452

dewingerd said:
Here is a link to the one i bought.
I tried many different ones but for me this is the best.
The coating is very good against fingerprints. It fits perfect on the screen.
The sides of the screen are a little bit curved down which is good for the dust.
https://www.aliexpress.com/snapshot/0.html?spm=a2g0s.9042647.0.0.JDCsAY&orderId=87369620878335&productId=32835736602
Click to expand...
Click to collapse
The link you've sent is private, I think we can't view it.

kurtextrem said:
The link you've sent is private, I think we can't view it.
Click to expand...
Click to collapse
Try this one : https://www.aliexpress.com/item/Ima...lgo_pvid=6f18e507-ed27-486a-869e-418c35f3a452

Do it sticks in all the area? or only in borders?
Thanks

DeividMS said:
Do it sticks in all the area? or only in borders?
Thanks
Click to expand...
Click to collapse
All the area.

Got the IMAK today and it is on and I LOVE it!!
Like there is no screenprotector there at all.
Will purchase some more rightaway.
EDIT: Never seen something fit so well!!

Dust2Dust said:
Got the IMAK today and it is on and I LOVE it!!
Like there is no screenprotector there at all.
Will purchase some more rightaway.
EDIT: Never seen something fit so well!!
Click to expand...
Click to collapse
I agree, this is the best screenprotector i have ever bought. It fits perfect and the coating feels the same as on the original screen :good::good:

Just wanted to echo everyone else about how great the Imak full coverage screen protector is. I went through four different screen protectors so far (unknown brand thin plastic one, MOFI tempered glass, another MOFI tempered glass, and finally the IMAK full coverage)
The thin plastic one came bundled with the phone and would scratch if you so much as raised your voice at it. Placed it on just as a temporary protector while waiting for the others to come from Aliexpress. It just barely covered the display and left about 1.5mm of space on the edges. The phone was accidentally smacked out of my hand once and landed on a sandy floor face down, which I later discovered upon removal of the screen protector had caused a small chip on the screen near the edge, so the protector might have absorbed some of the impact.
The first MOFI tempered glass I got was a "full coverage" one, but it arrived with notches cut out on the bottom where the proximity sensor and front camera are. The worst thing about this one was that it only had adhesive on the edges, so there was a really distracting and noticeable rainbow effect (newton rings) in the middle of the screen.
The second MOFI tempered glass was also full coverage, and this time it didn't have notches at the bottom, just a hole cutout where the proximity sensor is located. The adhesive type was the same as the previous one, edge only, resulting in the newton ring effect. It also mysteriously cracked for no reason.
The one I have on currently is the IMAK full coverage screen protector. Indisputably the best out of all of them, the protector fits exactly over the entire front glass, and instead of cutout holes at the bottom, the chin at the bottom is fully glass, blackened except for where the proximity sensor and front camera are. Full adhesive all throughout means there is no rainbow effect, and the LED notification light is even tinted slightly so that it blends in with the chin, and is invisible until it turns on! The only flaw about this screen protector (yes, there is one) is that the area underneath the front camera is too thin to apply adhesive, so as a result there's a tiny gap between the glass and phone that can let in dust after a while. The dust does not seem to affect the front camera, and I never take selfies anyway, but I have yet to figure out a good way to get the dust out of there.
I have never had a screen protector fit this perfectly, even for phones other than the Mi Mix 2. Most other screen protectors have cutouts for the proximity sensor/front camera/both, but this one blends in so well that it feels like it's not even there.

Does anyone know if this protector has a dot matrix on the screen (tiny dots that reflect)? I purchased a Misha 3D protector from Amazon which looks identical to this, and it's great except for the grid of dots across the screen.

dodgyc said:
Does anyone know if this protector has a dot matrix on the screen (tiny dots that reflect)? I purchased a Misha 3D protector from Amazon which looks identical to this, and it's great except for the grid of dots across the screen.
Click to expand...
Click to collapse
When I tried it there were no dots, just very reflective and had a weird smudge pattern going on which ruined it.
The flossmall one posted elsewhere is so much better.

Lol those kind of screen protectors damn sucks, they are not full glue, so that make lot of reflections. The nillkin (regular tempered glass, full glue, no black borders), is perfect and cover all the display... So why buy this imak piece of ****?

Zedramus said:
Just wanted to echo everyone else about how great the Imak full coverage screen protector is. I went through four different screen protectors so far (unknown brand thin plastic one, MOFI tempered glass, another MOFI tempered glass, and finally the IMAK full coverage)
The thin plastic one came bundled with the phone and would scratch if you so much as raised your voice at it. Placed it on just as a temporary protector while waiting for the others to come from Aliexpress. It just barely covered the display and left about 1.5mm of space on the edges. The phone was accidentally smacked out of my hand once and landed on a sandy floor face down, which I later discovered upon removal of the screen protector had caused a small chip on the screen near the edge, so the protector might have absorbed some of the impact.
The first MOFI tempered glass I got was a "full coverage" one, but it arrived with notches cut out on the bottom where the proximity sensor and front camera are. The worst thing about this one was that it only had adhesive on the edges, so there was a really distracting and noticeable rainbow effect (newton rings) in the middle of the screen.
The second MOFI tempered glass was also full coverage, and this time it didn't have notches at the bottom, just a hole cutout where the proximity sensor is located. The adhesive type was the same as the previous one, edge only, resulting in the newton ring effect. It also mysteriously cracked for no reason.
The one I have on currently is the IMAK full coverage screen protector. Indisputably the best out of all of them, the protector fits exactly over the entire front glass, and instead of cutout holes at the bottom, the chin at the bottom is fully glass, blackened except for where the proximity sensor and front camera are. Full adhesive all throughout means there is no rainbow effect, and the LED notification light is even tinted slightly so that it blends in with the chin, and is invisible until it turns on! The only flaw about this screen protector (yes, there is one) is that the area underneath the front camera is too thin to apply adhesive, so as a result there's a tiny gap between the glass and phone that can let in dust after a while. The dust does not seem to affect the front camera, and I never take selfies anyway, but I have yet to figure out a good way to get the dust out of there.
I have never had a screen protector fit this perfectly, even for phones other than the Mi Mix 2. Most other screen protectors have cutouts for the proximity sensor/front camera/both, but this one blends in so well that it feels like it's not even there.
Click to expand...
Click to collapse
After putting the screen protector on, I take a toothpick and put some glue from a Pritt-stick in the little gap underneath the camera. Not much, just enough to close the gap. When it has dried you can color it with a black whiteboard marker if you want. When you remove the screen protector you can easily rub it off. Works great for me :good:

Thanks!

Anyone tried these?
https://www.aliexpress.com/store/pr...Front-2PCS-Back-Soft/1879465_32831400367.html

Looking to buy this phone, any new news on protectors, or is IMAK our best option?
Thanks

Need Nilkin 3D CP+ Max, SP Review.

Hey guys I'm planning to buy the Nilkin 3D CP+ screen protector for my OnePlus 6 and I am hoping those of you who are already using it will share your experience with me.
My first concern is regarding the black borders on the sides, how much screen area do they eat up? Also does the border on the notch, make it look thicker?
The official TG glass from OnePlus is really overpriced in my country, so I'm really hoping the Nilkin one can be the next best alternative. Tia.

The main problem for me of the nillkin was that the glass is very thin. It broke when I was trying to separate a little bit from the screen to adjust it better.
It fits properly and yes, it takes a little bit of the screen with the borders, but not as much as other screen protectors.
In my opinion, and it's based on my experience, the most balanced is the orzly. It's the most similar to the Oneplus official one of those that I've tried.

I've had this one but it broke on the sides. The edges float above the glass because the adhesive only covers the screen. Because the glass is thin these edges beak quite easily. I currently have the normal tempered glass H (not the h+) this glas doesn't cover the edges, but there are no black borders that cover any part of the display. I've had I'd on for about 3 months know and I'm really pleased with it. No bubble's no cracks and quite good oleophobic coating. Also because this one is thicker than the h+ pro it doesn't break as easily. I have it alligned perfectly, maybe it makes a difference.

I have one of these that I bought through amazon through a Nillkin page. the black boarder definitely covers a bit of the screen. a bit of the notch boarder covers the screen. If you move it up so that there's no black from the notch border you'll cut off quite a few pixels off the bottom making it very hard to use gesture based controls. I had a problem with air bubbles, the ones near the top corners went away naturally, the 2 at the bottom 2 corners refuse to go away even after adjusting them and applying pressure for over 5 minutes. It's not a problem with the case as there's a very slim edge separating the glass from the case (Tudia 2 part case). Depending on how much you're spending on it I wouldn't recommend it, I paid $16CAD and I have buyers remorse I can't recommend this protector to anyone. There's no damage/cracks/halo effects after 2 weeks of usages, so that's a plus. I've ordered the dbrand prism screen protector, I'm hoping it'll be the same size minus the black borders.

The best one is Omron tempered glass. They came in a set of two. Nillkin hides some of the screen. Omron doesn't.

Thank you all for your response I won't buy the Nilkin glass since it breaks so easily. It's a shame OnePlus 6 has such a huge incompatibility with budget 5D/6D tempered glasses. Spending 18 quid on the official doesn't make any sense cause it too will break after a fall which can happen anytime.

eltarod said:
The best one is Omron tempered glass. They came in a set of two. Nillkin hides some of the screen. Omron doesn't.
Click to expand...
Click to collapse
I haven't seen these. The only Omron I've found make medical instruments.

Nillkin 3d CP Max is poor glass. It is to small for screen and cuts some screen part in up. I don't recommend this glass.
Yeah, but where can we find Omron glass for OP6?

jelennn said:
Nillkin 3d CP Max is poor glass. It is to small for screen and cuts some screen part in up. I don't recommend this glass.
Yeah, but where can we find Omron glass for OP6?
Click to expand...
Click to collapse
VEGM92 said:
I haven't seen these. The only Omron I've found make medical instruments.
Click to expand...
Click to collapse
I'm terribly sorry. I just checked. It's Omoton. :laugh::laugh::laugh:

Where to get this Omoton ? Could you post a photo of it on the phone?

Nillkin CP+Max Tempered Glass Review
Consider this my review of the Nillkin CP+Max Oneplus 6 Tempered Glass
Bought from Nillkin's Aliexpress official store.
Overall I am satisfied(I knew pretty much all of the problems listed below when i bought it).
Keep in mind when viewing the photos I have installed the glass as much to the top as the case lets me(Practically the glass and the case touch at the top.Maybe if I had another case I wouldn't have even more of the notch cutting in, but that is another story)
Pros:
- Very nice quality glass with excellent touch feeling.Perfect oleophobic coating compared to 1-3$ tempered glasses. Worth the extra dollars for this reason only!
- Fits with rhinoshield crashguard case(you have to install the glass while wearing the crashguard case and not the one oneplus provides!)
- Edge to edge cover(as much as it can be, as the sides of the phone have a small curve)
Cons:
- The black borders around the edge are too thick on every side. This results to having about 0.5 to 1mm of screen pixels covered at all times,which is especially visible in the notch area,which cuts even more inside the screen. Also visible on the bootloader screen where text starts from the very left of the screen and half the first letter is hidden.While in normal app use you never see text that far to the side to make it a huge problem,it some times shows in 21:9 videos on youtube fullscreen. It seems this is a problem every tempered glass with black borders has. Not only Nillkin's!
- A portion around the edges,beneath the black border doesn't have adhesive. (I think this is because the phone's glass starts to curve there making it impossible for adhesive to stick,so they don't put adhesive right there)
Maybe Nillkin should make the borders thinner in the future and also have them in a lower layer of the glass,so it doesn't look like a window.

Any full screen tempered glass without the black border around it?

I brought a spigen hybrid clear case today and am looking for a tempered glass without the black border around it as the border cuts off a little of the screen. Please recommend one, for delivery in India

gwenmillett said:
I brought a spigen hybrid clear case today and am looking for a tempered glass without the black border around it as the border cuts off a little of the screen. Please recommend one, for delivery in India
Click to expand...
Click to collapse
I tired multiple ones either their too big and causes halo effect or too small , so i opted for ones with black border and i am happy with it and so i would suggest goto a local shop check it out so you can see size .

I bought multiple screen protectors but gadgetshieldz offered amazing screen protector. Yes it is not tempered glass but its quality is really good and the phone feels slimmer since its not a tempered glass. If you dont have butter fingers and your phone doesnt fall often then go for it.

I tried all the variants and brands on the market. Finally settled on using a hydrogel screen protector. It is not available on any online stores but local shops definitely have them. Though it may not provide the drop protection that glass protectors provide, it is resistant to scratches and you will not even know it's there. It covers the front from edge to edge. Again, it is not very high on shatter level protection but it is great for light users like me.

Nick_101d said:
I bought multiple screen protectors but gadgetshieldz offered amazing screen protector. Yes it is not tempered glass but its quality is really good and the phone feels slimmer since its not a tempered glass. If you dont have butter fingers and your phone doesnt fall often then go for it.
Click to expand...
Click to collapse
I don't think a thin plastic protector should be worth 500 bucks

gwenmillett said:
I brought a spigen hybrid clear case today and am looking for a tempered glass without the black border around it as the border cuts off a little of the screen. Please recommend one, for delivery in India
Click to expand...
Click to collapse
Try looking for TG's for Lenovo Z5 Pro/Z5 Pro GT.
It have the same dimensions as our device.

I purchased one from glazedinc. It costs about 495, I know it'a a bit steep, but for what it's worth it covers the entire display and has real 2.5d on the edges. It really feels like using the phone without a tampered glass. From what I heard as it covers the entire screen it also provides better drop protection.

I got one from a local shop for Rs.80 ($1.10). No black borders, covers the screen display portion exactly.