These UFirm Carrier Roms are so big I chose to use the flash system.img.ext4 first method in Flashfire followed by a partial rom zip so I could get all the multicarrier stuff to fit. This way also insures that all symlinks and permissions are correct.
Download N8 Firmware HERE
Download NOTE8_DEODEX_ROM_AQI5_V1.zip
Directions
You must be rooted
Extract AP file from the firmware zip and copy AP file to your phone internal storage
Copy NOTE8_DEODEX_ROM_AGI5_V1.zip to your phone
Open Flashfire and choose add zip and choose NOTE8_DEODEX_ROM_AQI5_V1.zip mount system when it ask
In Flashfire choose add firmware and choose AP file. Select system.img.ext4 and persit.img.ext4 DO NOT select boot and recovery images
Add wipe and move wipe to top of flash order
Make sure inject supersu IS NOT SELECTED
Flash order should be wipe; firmware; rom
Click Flash
Faetures
Fully Stock All Carriers
Deodexed
Rooted
Volte Icon Fixed
Extras: These are already included in the rom but may come in handy
NOTE8_VOLTE_ICON_FIX_ALL_VARIANTS.zip
NOTE8_ADD_WIFICALLING_VOLTE_ICON_FIX_VZW.zip
....This is for getting WifiCalling and Visual Voicemail working on U1 Firmware (Unlocked firmware) For Verizon Only
Keyser~soz3 said:
Will you make this for tmobile note 8 please
Click to expand...
Click to collapse
What Does the title say?
@jkruse, good to see you here man!!! Just got the note from my s7 edge loved your rom on the edge.
Are you planning something similar here? Either way good to know you are here.?
Sent from my SM-N950U using Tapatalk
lahegry said:
@jkruse, good to see you here man!!! Just got the note from my s7 edge loved your rom on the edge.
Are you planning something similar here? Either way good to know you are here.?
Click to expand...
Click to collapse
I don't have the Note8 I just made this per requests for some people that want to run xposed. So I won't be doing much here
jrkruse said:
I don't have the Note8 I just made this per requests for some people that want to run xposed. So I won't be doing much here
Click to expand...
Click to collapse
Well, darn it! Good to see you none the less.
Sent from my SM-N950U using Tapatalk
This rom runs great!! To be expected being from jrkruse. Played with it this weekend and used it all day today at work. Super fast and smooth. Battery lasts much better than i figured it would. Brought my charger to work to be safe, and actually used less battery than stock setup. Thanks jrkruse for this and whatever you end up doing here.
Bsober said:
This rom runs great!! To be expected being from jrkruse. Played with it this weekend and used it all day today at work. Super fast and smooth. Battery lasts much better than i figured it would. Brought my charger to work to be safe, and actually used less battery than stock setup. Thanks jrkruse for this and whatever you end up doing here.
Click to expand...
Click to collapse
People need to thank you as it was partly your request that encouraged me to make this. Thanks for all the times you tried my new stuff on s7
jrkruse said:
People need to thank you as it was partly your request that encouraged me to make this. Thanks for all the times you tried my new stuff on s7
Click to expand...
Click to collapse
Yeah, that s7 edge stuff was fun i'd have to say. Quite the trip start to finish. I figure S8+ cant be too far off from this phone. Hope you pop in with some cool stuff for this phone. I'm open to play with any of it.
jrkruse said:
Download N8 Firmware HERE
Download NOTE8_DEODEX_ROM_AGI5_V1.zip
Directions
You must be rooted
Extract AP file from the firmware zip and copy AP file to your phone internal storage
Copy NOTE8_DEODEX_ROM_AGI5_V1.zip to your phone
Open Flashfire and choose add zip and choose NOTE8_DEODEX_ROM_AGI5_V1.zip mount system when it ask
In Flashfire choose add firmware and choose AP file. Select system.img.ext4 and persit.img.ext4 DO NOT select boot and recovery images
Add wipe and move wipe to top of flash order
Make sure inject supersu IS NOT SELECTED
Flash order should be wipe; firmware; rom
Click Flash
Faetures
Fully Stock All Carriers
Deodexed
Rooted
Volte Icon Fixed
Click to expand...
Click to collapse
You should post a link in the base note 8 Development Forums
https://forum.xda-developers.com/galaxy-note-8/development
Thanks for working on this, I have been waiting for this to root
b3y0ndd34th said:
You should post a link in the base note 8 Development Forums
https://forum.xda-developers.com/galaxy-note-8/development
Thanks for working on this, I have been waiting for this to root
Click to expand...
Click to collapse
I'm not looking to maintain more threads If someone wants to post have at it
Missing all the fun while I get my Swappa business sorted out Can barely contain the excitement to try it out!
Thank you very much!! The best stuff in the phone world is right here on xda
?
Wow thanks @jrkruse
Has anyone tried this with AT&T? Main question is does the phone still make and receive calls if Enhanced LTE Services is enabled?
I need someones help: Can someone that istalled this rom and has the ability to follow directions and upload big files pm me
was able to get this to work on T-Mobile no fuss, running great. THANK YOU..
JustinCasehegone said:
was able to get this to work on T-Mobile no fuss, running great. THANK YOU..
Click to expand...
Click to collapse
Stupid question, for Tmo you used the AP file provided in the OP?
vazquezcmp said:
Stupid question, for Tmo you used the AP file provided in the OP?
Click to expand...
Click to collapse
All the carriers firmware are the same as far as ap bl and cp files and home csc files. Only difference is userdata images
vazquezcmp said:
Stupid question, for Tmo you used the AP file provided in the OP?
Click to expand...
Click to collapse
Yes, those exact steps.
One thing that was confusing was how to get "Wipe" to top, but once all files are selected you can re-arrange the ROM, Firmware, Wipe pretty easily.
@jrkruse Hey man what do you need?
Much appreciated kind Sir. jrkruse, glad to see you here.
Related
******UPDATE FIX YOUR T337A WITH LOLIPOP FRIMWARE FILE******* I do not take credit for this file at all, all credit goes to MichaelSaya. Here is a direct quote from him "Here is the link to my Google drive with the Official Lollipop Firmware for the AT&T TAB 4, SM-T-337-A https://mega.nz/#!0Q4AXQgZ!Df-pTUo6eA80kGTrzpYCAJ0ilGbUzMYCE4nRtvume6s Place in AP slot in Odin and flash. Be aware that many have been bricked. Only root with Kingroot and when you reboot, you will lose root. Simply re-root with Kingroot and you will be fine. DO NOT REPLACE KINGROOT WITH SUPERSU!!!!! YOU WILL BRICK!!!!! But we have the firmware now so we can now play around knowing that if we mess something up, we can fix it."
I found a way to re-root the t337a with the latest OTA NK2. Not sure if I was the only one in this boat or whatever but I got bored and started experiment. First thing i did was Flash the older NF4 kernel with ODIN. Put this in the PDA slot and flash! It was successful, I downloaded Towel root, and bam! Root working again ! Cheers!
Tutorial:
1. Get the latest drivers to make sure everything goes smooth http://org.downloadcenter.samsung.c...NG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe
2. Get Odin if you don't have it yet: http://forum.xda-developers.com/attachment.php?attachmentid=1168421
3. Download the NF4 kernel from the attachment below
4. Go into Odin.
5. Click on PDA, search for the file you downloaded boot.tar and select it. Pic: http://i.imgur.com/XrqVPLZ.png
6. Now, put your tablet into download mode! If you don't know how to enter download mode go here: https://www.youtube.com/watch?v=dDE1oB2-nYw its the s5 but same concept.
7. Plug in your tablet and it should say something like this in message window in odin: http://i.imgur.com/uWFc4YX.png
8. Now, hit start. Let the process run. If all goes well it should say RESET! I dont know what happened to this pic lol http://i.imgur.com/AbH5qW7.png but hopefully you get the point.
9. Give the tablet a few minutes to boot. Keep it plugged in until you see PASS! http://i.imgur.com/eTuHDUl.png
10. Go get towel root. Run it. And BAM! You are rooted again
*** WARNING *** This doesn't work with the lolipop update. I have tried to downgrade my tablet and it did softbrick it. Do not try to downgrade your tablet/try this method if you are running lolipop 5.1.1. This only works on kitkat. HOWEVER. I have the lolipop boot.tar. Use the instructions above to unbrick your tablet (This will not give you root access. I'm going to look at it and see if I can figure something out to get root access). I have not tested this myself because mine is at a friends house BUT this should work. Cheers
CocaFoca said:
I found a way to re-root the t337a with the latest OTA NK2. Not sure if I was the only one in this boat or whatever but I got bored and started experiment. First thing i did was Flash the older NF4 kernel with ODIN. Put this in the PDA slot and flash! It was successful, I downloaded Towel root, and bam! Root working again ! Cheers!
Download link: Below
Click to expand...
Click to collapse
Hi,
Neat ! so if the older kernel was compiled before towel root's october deadline [i think it was october] when that vulnerability
was closed then that would make sense. :good:
so the rom run just fine with the older kernel ?
could you post the older NF4 kernel/boot.img and modules ?
thanks
m
Absolutely! Heres the thing. I cant post links yet. Is there anyway i can pm itnto you and idk you set up a post? Or is there another way
June.
Sent from my XT907 using XDA Free mobile app
moonbutt74 said:
Hi,
Neat ! so if the older kernel was compiled before towel root's october deadline [i think it was october] when that vulnerability
was closed then that would make sense. :good:
so the rom run just fine with the older kernel ?
could you post the older NF4 kernel/boot.img and modules ?
thanks
m
Click to expand...
Click to collapse
So I put the kernel/boot.img in a attachment. Yes everything runs very smooth. Especially after all the frozen bloatware! Anyways happy rooting !
Also attatched is a screenshot with me rooted/on NK2 with the NF4 kernel!
CocaFoca said:
So I put the kernel/boot.img in a attachment. Yes everything runs very smooth. Especially after all the frozen bloatware! Anyways happy rooting !
Also attatched is a screenshot with me rooted/on NK2 with the NF4 kernel!
Click to expand...
Click to collapse
Yup that'll do it. Good deal on getting that sorted, thanks!
and to pm click on the user's name and select send private message.
be sure to reply to this message to bring your post count up x1
m
YES!
CocaFoca said:
I found a way to re-root the t337a with the latest OTA NK2. Not sure if I was the only one in this boat or whatever but I got bored and started experiment. First thing i did was Flash the older NF4 kernel with ODIN. Put this in the PDA slot and flash! It was successful, I downloaded Towel root, and bam! Root working again ! Cheers!
Download link: Below
Click to expand...
Click to collapse
Hey man this is just what iv been looking for, i have a sm-t337a and would love root. if you could help i would appreciate it, if you could provide a tutorial or where to get the older NF4 kernel. :good::good::good:
amdtabv said:
Hey man this is just what iv been looking for, i have a sm-t337a and would love root. if you could help i would appreciate it, if you could provide a tutorial or where to get the older NF4 kernel. :good::good::good:
Click to expand...
Click to collapse
I added a tutorial! Happy rooting!
Fails in Odin
Followed the instructions, but it keeps failing. Any ideas?
Carl
CarlDinAZ said:
Followed the instructions, but it keeps failing. Any ideas?
Carl
Click to expand...
Click to collapse
Hey man. Sorry to hear it keeps failing. Could you give me a screenshot of odin and a screenshot of the about device info should have build number etc. Will see what I can do
CocaFoca said:
Hey man. Sorry to hear it keeps failing. Could you give me a screenshot of odin and a screenshot of the about device info should have build number etc. Will see what I can do[/QUOTE
Screen shots attached. Thanks for helping.
Click to expand...
Click to collapse
CarlDinAZ said:
Screen shots attached. Thanks for helping.
Click to expand...
Click to collapse
You've got the wrong device. This is for the T337A, not the T537A.
Sent from my SM-N900V using Tapatalk
CarlDinAZ said:
CocaFoca said:
Hey man. Sorry to hear it keeps failing. Could you give me a screenshot of odin and a screenshot of the about device info should have build number etc. Will see what I can do[/QUOTE
Screen shots attached. Thanks for helping.
Click to expand...
Click to collapse
Yeah you indeed do have the wrong device, however if you want i can upload the NE1 kernel (first kernel for the t537a). However... i have not tested it for this device. It should be the same concept but im not 100 percent sure it will work. Do you want to at least try? Ill post it in my next reply if you are interested in giving it a go.
Click to expand...
Click to collapse
CocaFoca said:
CarlDinAZ said:
Yeah you indeed do have the wrong device, however if you want i can upload the NE1 kernel (first kernel for the t537a). However... i have not tested it for this device. It should be the same concept but im not 100 percent sure it will work. Do you want to at least try? Ill post it in my next reply if you are interested in giving it a go.
Click to expand...
Click to collapse
Sure - I will give it a try.
Click to expand...
Click to collapse
CarlDinAZ said:
CocaFoca said:
Sure - I will give it a try.
Click to expand...
Click to collapse
Hey Man. I got that boot.tar from the T537A. Follow the instructions the same way except use this boot.tar. Hope it works. If it does, I'll add it to the tutorial. Let me know how it goes! PLEASE ONLY FLASH THE FOLLOWING ATTACHMENT IF YOU HAVE THE T537A! I re named the file but somebody might not read.
Click to expand...
Click to collapse
CocaFoca said:
Hey man. Sorry to hear it keeps failing. Could you give me a screenshot of odin and a screenshot of the about device info should have build number etc. Will see what I can do
Click to expand...
Click to collapse
CocaFoca,
hi, this is off-topic but, do you have a working recovery for the 337a yet? Or a lead on unlocking it?
I've alternately tried to mod safestrap and actually build it from what sources Hashcode had up
but no dice.
on the odin image, it may have been packed wrong,
run this script in the same directory as the boot.img
#!/bin/bash
tar -H ustar -c boot.img > boot.tar
md5sum -t boot.tar >> boot.tar
mv boot.tar boot.tar.md5
odin complains about the md5 sometimes so you can skip
the last line, it will still flash.
m
moonbutt74 said:
CocaFoca,
hi, this is off-topic but, do you have a working recovery for the 337a yet? Or a lead on unlocking it?
I've alternately tried to mod safestrap and actually build it from what sources Hashcode had up
but no dice.
on the odin image, it may have been packed wrong,
run this script in the same directory as the boot.img
#!/bin/bash
tar -H ustar -c boot.img > boot.tar
md5sum -t boot.tar >> boot.tar
mv boot.tar boot.tar.md5
odin complains about the md5 sometimes so you can skip
the last line, it will still flash.
m
Click to expand...
Click to collapse
I unfortunately do not. I do believe I know why safestrap isnt workin SElinux wont disable at all for me... Tried booting safestrap for different att phones and it woulndt stick always said not active. I believe we need to find a way to make it permissive then it will work? Tried the one on the market didnt work. I did get one to make it permissive but it reset after reboot :/ im just a newbie at this stuff but tbh I want to learn. Anyways... Im interested in this... Will look into it tomorrow
CocaFoca said:
I unfortunately do not. I do believe I know why safestrap isnt workin SElinux wont disable at all for me... Tried booting safestrap for different att phones and it woulndt stick always said not active. I believe we need to find a way to make it permissive then it will work? Tried the one on the market didnt work. I did get one to make it permissive but it reset after reboot :/ im just a newbie at this stuff but tbh I want to learn. Anyways... Im interested in this... Will look into it tomorrow
Click to expand...
Click to collapse
Coca,
ok you may need selinux enabled busybox, check this thread, http://forum.xda-developers.com/and...de-busybox-snapshot-building-android-t2857650 , the OP is a good read the links are a ways down, i've tested out both versions and they seem square.
my last thought is to replace the two distinct busybox binaries in safestrap, busybox and bbx, my attempts with safestrap
end up rebooting to my actual recovery if that provides a lead. the version i chose for modding was Galaxy S4 (ATT) [JFLTEATT]
http://blog.hash-of-codes.com/downloads/safestrap/
CocaFoca said:
CarlDinAZ said:
Hey Man. I got that boot.tar from the T537A. Follow the instructions the same way except use this boot.tar. Hope it works. If it does, I'll add it to the tutorial. Let me know how it goes! PLEASE ONLY FLASH THE FOLLOWING ATTACHMENT IF YOU HAVE THE T537A! I re named the file but somebody might not read.
Click to expand...
Click to collapse
I'm not sure what happened CarlDinAZ but I had the same specs on my Tab 4 I just got through an upgrade from AT&T and after following the tutorial by Coca using the boot.tar he provided for the T537A and then rooting with towelroot I can confirm that it does work for this model.
Thanks for the boot.tar and tutorial Coca!
Click to expand...
Click to collapse
moonbutt74 said:
CocaFoca,
hi, this is off-topic but, do you have a working recovery for the 337a yet? Or a lead on unlocking it?
I've alternately tried to mod safestrap and actually build it from what sources Hashcode had up
but no dice.
on the odin image, it may have been packed wrong,
run this script in the same directory as the boot.img
#!/bin/bash
tar -H ustar -c boot.img > boot.tar
md5sum -t boot.tar >> boot.tar
mv boot.tar boot.tar.md5
odin complains about the md5 sometimes so you can skip
the last line, it will still flash.
m
Click to expand...
Click to collapse
Just had a had a thought, maybe we could tweak a twrp version for say the t-mobile version and try to code safestrap into that and make it boot on our t337a? Recently had the need for a recovery and I want to help get it working! Do you think there is any chance with the one linked here?: http://forum.xda-developers.com/tab-4/general/sm-t235-lte-rooted-twrp-2-8-alpha1-sm-t3027059
Take Note: jds3118 and me have this rom posted on multi threads so questions and new updates will be posted on main thread located HERE
Verizon Is Pretty Much 100 Percent Working
Other Carriers Is A Work In Progress!!!
Echoe Rom for snapdragon USA
G935/G930 s7e/s7...
Aroma Edition...
Aroma installer options..
Choice of edge or flat..
Choice of carrier (Att,tmo,spr,vzw)
Choice of boot animation..
Mod Options...
Ux N7 apps..
N7 camera..
3 pages of app debloat options..
And more...
SuperSU 2.78
Deodexed
De-knoxed
De-bloated (mildly)
Rooted
Viper4/atmos
AdAway
Doze
Cpuspy
Fastergps
Root tool
Flasfire
Echoe control app
3Minit Battery
3Minit Clock
Custom Echoe boot animation
+ more to come
INSTALLATION:
MUST BE ROOTED!
1. Install Flashfire by @Chainfire from play store.
2. Make sure zip file is on ext sdcard as this will wipe user system, user data, int sdcard
3. Open Flashfire app (agree to terms) then press the red plus button in lower right corner and select flash zip file.
4. On the next pop up screen press the check box in the top right corner.
5. Scroll to bottom left corner and press the lighting bolt to flash and click OK on popup.
*****FIRST BOOT TAKES ABOUT 10-15 Total istall 15-20 MINUTES*****
Strongly Recommend Full Wipe!!!!
May reboot several times let it do it's thing!!!
Download link...
ECHOE_G935_Universal_AROMA_V1_2.zip​
I will post an install video when I can, but if not sure about the installation process just ask. Enjoy and let us know how you like it.
Additional support for this rom can be found Here
Thanks To These Guys
The Whole Echoe Team
jds3118 for helping develope this thing
psouza4 for his kernel mods
Awesome
Sent from my SGH-M919 using XDA-Developers mobile app
Pretty much? What's not working? Anyone tried this one yet? Flashing it now but curious.
blazie151 said:
Pretty much? What's not working? Anyone tried this one yet? Flashing it now but curious.
Click to expand...
Click to collapse
You may be the first lol let us know how it goes after flashing....
jds3118 said:
You may be the first lol let us know how it goes after flashing....
Click to expand...
Click to collapse
I flashed it but nothing happened
---------- Post added at 03:52 AM ---------- Previous post was at 03:52 AM ----------
Followed the steps did wipes and when it booted up i was on stock rom still
shooterlgk said:
I flashed it but nothing happened
---------- Post added at 03:52 AM ---------- Previous post was at 03:52 AM ----------
Followed the steps did wipes and when it booted up i was on stock rom still
Click to expand...
Click to collapse
Hi guys. I followed each step correctly and when the phone rebooted it got stuck on the Galaxy S7 splashscreen. I chose my variant (Sprint) while I was setting up the phone in Aroma. Is there something i did wrong? Perhaps next time I am going to choose the Verizon variant since it does state in this forum that it is 100% working correctly.
Fischer1234 said:
Hi guys. I followed each step correctly and when the phone rebooted it got stuck on the Galaxy S7 splashscreen. I chose my variant (Sprint) while I was setting up the phone in Aroma. Is there something i did wrong? Perhaps next time I am going to choose the Verizon variant since it does state in this forum that it is 100% working correctly.
Click to expand...
Click to collapse
How did u even get to aroma?..mine would reboot as soon as it was about to set up aroma
shooterlgk said:
How did u even get to aroma?..mine would reboot as soon as it was about to set up aroma
Click to expand...
Click to collapse
Started on stock PF2 with root. I mean all I did was flash it via FlashFire. It went to Aroma immediately. I set up everything (choosing my variant which is Sprint), and when the phone rebooted it got stuck on the Galaxy S7 splashscreen and never advanced from there. I am not sure what I did wrong, it was weird. Any one else have this similar issue or is it just me? Next time I will try choosing the Verizon variant in Aroma.
Fischer1234 said:
Started on stock PF2 with root. I mean all I did was flash it via FlashFire. It went to Aroma immediately. I set up everything (choosing my variant which is Sprint), and when the phone rebooted it got stuck on the Galaxy S7 splashscreen and never advanced from there. I am not sure what I did wrong, it was weird. Any one else have this similar issue or is it just me? Next time I will try choosing the Verizon variant in Aroma.
Click to expand...
Click to collapse
Mine must b a bad download then, i didnt go to aroma..ill re-download it. So u havent tried verizon version yet?
shooterlgk said:
Mine must b a bad download then, i didnt go to aroma..ill re-download it. So u havent tried verizon version yet?
Click to expand...
Click to collapse
Not yet. I just posted my issue over at their forum so ill see what they say. It looks like with every carrier things have been working fine. I am odining back to stock and next time I flash it I will choose my variant as Verizon, or i will double check things and see if it boots up. And i dont think it would be a bad download.. I downloaded the rom right off of this forum. But I will report back.
Fischer1234 said:
Not yet. I just posted my issue over at their forum so ill see what they say. It looks like with every carrier things have been working fine. I am odining back to stock and next time I flash it I will choose my variant as Verizon, or i will double check things and see if it boots up. And i dont think it would be a bad download.. I downloaded the rom right off of this forum. But I will report back.
Click to expand...
Click to collapse
I meant mine must b a bad download. Cuz i couldnt even get into aroma. As for u idk whats wrong. Did u wait for 10-15 minutes?
shooterlgk said:
I meant mine must b a bad download. Cuz i couldnt even get into aroma. As for u idk whats wrong. Did u wait for 10-15 minutes?
Click to expand...
Click to collapse
Yes sir. It was stuck on the Galaxy S7 splashscreen for about an hour. I will try again. In Aroma it gives a list of all the variants.. sooo do you think if I chose Verizon even though I have a Sprint phone that it'll work? I am a little unsure. I checked the rom under every variant in xda and it looks like AT&T and Verizon are good. I mean I would think the developers would test this rom before posting it, right?
Fischer1234 said:
Yes sir. It was stuck on the Galaxy S7 splashscreen for about an hour. I will try again. In Aroma it gives a list of all the variants.. sooo do you think if I chose Verizon even though I have a Sprint phone that it'll work? I am a little unsure. I checked the rom under every variant in xda and it looks like AT&T and Verizon are good. I mean I would think the developers would test this rom before posting it, right?
Click to expand...
Click to collapse
The rom should work, i mean developers know not to put out something broken. I tried a rom in the verizon section for my sprint s7 and it never got past Samsung screen. So im not sure if u flashing the Verizon variant would make it work
shooterlgk said:
The rom should work, i mean developers know not to put out something broken. I tried a rom in the verizon section for my sprint s7 and it never got past Samsung screen. So im not sure if u flashing the Verizon variant would make it work
Click to expand...
Click to collapse
are you guys rooted on pe1? are the packages that were disabled from the root forum disabled still? with our variant we have other factors to take into consideration
PoppNLPatrick said:
are you guys rooted on pe1? are the packages that were disabled from the root forum disabled still? with our variant we have other factors to take into consideration
Click to expand...
Click to collapse
Im actually rooted on pf2. Yes those packages r disables still. What can i do?
shooterlgk said:
Im actually rooted on pf2. Yes those packages r disables still. What can i do?
Click to expand...
Click to collapse
Try Odin back to stock then root then flash ROM....
jds3118 said:
Try Odin back to stock then root then flash ROM....
Click to expand...
Click to collapse
Ill give it a try
shooterlgk said:
Ill give it a try
Click to expand...
Click to collapse
Or maybe we should wait until the developer makes sure all other carriers are working before trying to flash the rom again.. I feel like you will get the same problem I ran into.
Fischer1234 said:
Or maybe we should wait until the developer makes sure all other carriers are working before trying to flash the rom again.. I feel like you will get the same problem I ran into.
Click to expand...
Click to collapse
Maybe. I guess I'll hold off
shooterlgk said:
Maybe. I guess I'll hold off
Click to expand...
Click to collapse
No no man. You can try and see what happens, there's nothing wrong with that. I mean you may run into the problem I had or it could be a completely different outcome.
Hey everyone,
Here is a guide to flash AT&T Nougat to our T-Mobile S7. For convenience I have uploaded everything needed to google drive.
So far the only thing I have found that isn't working is Wi-Fi Calling.
1) Download everything from this Google Drive folder:
https://drive.google.com/drive/folders/0B6HE3dipVfjZOVRMcWd1S3IzOVE?usp=sharing
2) Copy the "update.zip" to your SD card. If you don't have an SD Card, you may need to copy it to your phone after step (4)
3) Put your phone into Download mode
4) Flash the PK1 files in Odin (AP, CSC, BL, and CP)
5) Once your phone restarts to the setup screen (could take 10-15 minutes) restart back into Recovery mode. No need to do any setup here
6) Flash update from SD Card and select "update.zip". This step can take over 30 minutes.
7) Once you have gone through the initial setup, you need to fix the APN settings.
a) Go to Settings - Connections - Mobile Network - Access Point Names
b) Click Add
c) Fill in these APN Settings
Name: T-Mobile US LTE
APN - fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
APN type: default,mms,supl
d) Click the 3dots menu - Save
e) Click on the newly created menu
f) Now your LTE data should work
And Voila! You now have a working final version of Nougat. You can disable almost everything that AT&T puts on there.
EDIT: I've updated the Google Drive link with a compressed file containing all the needed AT&T files.
If this works for you please go to the following post and thank the OP. Without his instructions, I would have not been able to do this.
https://forum.xda-developers.com/at...to-update-galaxy-s7-edge-firmware-to-t3541296
Are there any connection drops: Bluetooth, Wi-Fi, or cellular drop? Is the signal good where it is supposed to be good?
Illyakulinych said:
Are there any connection drops: Bluetooth, Wi-Fi, or cellular drop? Is the signal good where it is supposed to be good?
Click to expand...
Click to collapse
No, I haven't had any connection drops. I only flashed it last night, I will definitely keep everyone here updated. Cell signal is just as good as the latest tmobile features.
Also, I realized I posted this in the Q&A section. Any chance an admin could move it to the Guide section
plz compress it and upload again impossible to download
popmpopm said:
plz compress it and upload again impossible to download
Click to expand...
Click to collapse
Sorry about that. Reuploading now. The same link should work and it will be ready in about 20 minutes. I'll edit this post when it is uploaded.
Is there any difference between verizon nougat and at&t nougat ?
I mean i am using verizon nougat on my s7 tmobile but I experience issues with cellular network alot.
Could someone guide me please?
Owi93 said:
Is there any difference between verizon nougat and at&t nougat ?
I mean i am using verizon nougat on my s7 tmobile but I experience issues with cellular network alot.
Could someone guide me please?
Click to expand...
Click to collapse
The main differences I found between the Version nougat I was using and this version is that the latest Verizon version I could find was still just a beta. This is what seems to be a fully finished version of nougat. As I said, I have only had this for 1 day on my phone, but so far I have had absolutely no issues. The Verizon version gave me battery life issues, it caused my phone to overheat quite often, this version has none of those problems.
r3xx3r said:
The main differences I found between the Version nougat I was using and this version is that the latest Verizon version I could find was still just a beta. This is what seems to be a fully finished version of nougat. As I said, I have only had this for 1 day on my phone, but so far I have had absolutely no issues. The Verizon version gave me battery life issues, it caused my phone to overheat quite often, this version has none of those problems.
Click to expand...
Click to collapse
I see.
So No mobile data issues you mean ?
Owi93 said:
I see.
So No mobile data issues you mean ?
Click to expand...
Click to collapse
exactly. I have not had any mobile data issues yet. Battery life so far is amazing. Performance is awesome.
r3xx3r said:
exactly. I have not had any mobile data issues yet. Battery life so far is amazing. Performance is awesome.
Click to expand...
Click to collapse
Thanks for the help man.
I will try this today.
Will I have to go back to the tmobile stock firmware first ? To flash the at&t firmware?
Owi93 said:
Thanks for the help man.
I will try this today.
Will I have to go back to the tmobile stock firmware first ? To flash the at&t firmware?
Click to expand...
Click to collapse
I was on stock t-mobile firmware, but I don't see why you would need to be too flash this.
thanks for y hard work
Are the French language in this rom
r3xx3r said:
I was on sick tmobile firmware, but I don't see why you would need to be too flash this.
Click to expand...
Click to collapse
I don't know bro.
I am new to this game.
I just don't want something bad to happen
popmpopm said:
thanks for y hard work
Are the French language in this rom
Click to expand...
Click to collapse
Yes they are
Owi93 said:
I don't know bro.
I am new to this game.
I just don't want something bad to happen
Click to expand...
Click to collapse
Than flash back to stock firmware.
r3xx3r said:
I was on sick tmobile firmware, but I don't see why you would need to be too flash this.
Click to expand...
Click to collapse
if you know 930U MM rom are great too ( yes 930t is really very bad rom ) am uncertain to change it
can someone confirm that VoLTE works?
Just flashed this. So far so good. Will reply later tomorrow to let people know if I find anything not working
Quick question the, the files I downloaded is a pk1 is that that actual Update file? Or is that the odin files to flash threw odin? Then the update file should be there to do a recovery flash Update?
I'm already on pk1 but the mobile and it didn't flash threw recovery. I thought I'd just have to flash it over this but not being on att started to figure that I need to be on att pk1.
Thanks in advance
dandel0074 said:
Quick question the, the files I downloaded is a pk1 is that that actual Update file? Or is that the odin files to flash threw odin? Then the update file should be there to do a recovery flash Update?
I'm already on pk1 but the mobile and it didn't flash threw recovery. I thought I'd just have to flash it over this but not being on att started to figure that I need to be on att pk1.
Thanks in advance
Click to expand...
Click to collapse
Okay, so there are 5 files in the archive. 4 of them end in .tar.md5 and those are the AT&T PK1. You need to flash those files through Odin, than flash the update.zip through the phones recovery mode. You need to be on the AT&T PK1 before you can flash the update.zip through the recovery. Flashing the update.zip while on the T-Mobile PK1 will fail.
First off Safestrap is need for this to work...:good:
This is a complete stock system .IMG I pulled from BQL1 /BRB1 just to keep the same as rest of the roms out there.....Fully bloated nothing removed...100% Stock
The stock images here will now work for SafeStraped Revision 5 or 6 bootloaders in order to obtain nougat rooted
No mods/No crazy fancy foot work....This is a do it your self stock rooted rom setup for all who wants it....
And no this uses the same kernel as other roms, Battery charges to 80% like any other for Snapdragon S8
Manual fix for 80% charge
https://forum.xda-developers.com/galaxy-s8/how-to/wip-manual-charge-past-80-snap-dragon-t3918553
This is the last nougat firmware available before We went to nougat...
Super stock 7.0 No bags/No wallplugs
Without further ado
I have updated with BRB1 as well at bottom of this post.
Download the stock system .IMG from here https://drive.google.com/file/d/1kPJaF4AMNyMr-3RLfycKuX3ZOxPQeWz1/view?usp=sharing BQL1 here
We need busy box from here...... https://drive.google.com/open?id=1k1zOTMAAuqL1KydoHj_QpOwmOQQqSTXT I used this one as i know it works if you want to update go ahead.
We need system mode SU Not system-less from here..... https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Ok Now we got all that. Place the system .img on internal SD card and extract there.....Then goto TWRP in SafeStrap......
We want to wipe system cache and dalvik....Like always...:good::good::good:
Then after that flash that sys.img to system..
We need to then flash Su and Busy box....For good measure factory reset after all said and done...
Before reboot Reboot to download mode....
In download mode then flash your respective CSC file in Normal odin I use 3.13
If you do not do this you will have a bunch of metro pcs cricket and tmobile crap as well as double and triple menus,So you are warned
Once all this is done reboot system as normal sign in and do your thing enjoy a 100% stock rooted rom.....
No xposed no nothing Be aware xposed will break Bluetooth pairing on reboots...
Also on a side note.If you are on bootloader revision 3 or 4 you cannot downgrade to root nor is root available for these revisions
Revision 5 or 6 bootloaders see here for safestrap, https://forum.xda-developers.com/galaxy-s8/development/root-t3904613
Then you can follow this starting with system img... DO NOT ATTEMPT TO FLASH REV 4 OR LOWER BOOTLOADERS ON REVISION 5
Make sure to give our man @jrkruse the proper credits he deserves for Bringing this to revision 5 bootloaders..
Instructs for rev 5 or 6
https://forum.xda-developers.com/showpost.php?p=79004426&postcount=29
Again you must already Safe-strap installed...
Credits
As always Thank @partcyborg for root and wonderful rom for our S8.
@mauam for the version of SU downloads
As well as @Chainfire for all of his hard work and SU
@YashdSaraf for his version of busy box
@TheMadScientist For all this crap here lol:good::good::good:
If I am missing any one just hollar at me:good:
Disclaimer This is a build your own system from scratch So any issues you may have can be possibly helped here but in the end it is your own accord of flashing and modding Dont cry to me when you break something
Im a mechanic Not a rom developer I just know there are several out there that dont like the other roms available for our S8 locked bootloader. So just another option:good::good::good:
This is Jrkruzes safestrap method and zips in this post very helpful
https://forum.xda-developers.com/showpost.php?p=79004426&postcount=29
And BRB1 latest 7.0 here https://drive.google.com/open?id=1h6e-3qCkE4JhiAlGjk94jpCz2CVMir8Z
And here is the BRB1 baseband CP for odin https://drive.google.com/open?id=1BuUc-R6jU7ha4nn4vkPrLfvfz2axi5Ru
Flashing this is similar to flashing the first one.But if you are on my stock rooted now you can dirty flash this system followed by su then busybox and then open odin and reflash CSC or a no signal situation will present itself.
Other than that I did dirty flash all of my apps and most of my settings were left untouched...
Thanks i'll try later this week
MalharB said:
Thanks i'll try later this week
Click to expand...
Click to collapse
This is stricktly 100% stock no mods no nothing everything included
TheMadScientist
No bags/No wallplugs[/QUOTE said:
?????
And btw, Congrats! ?
Sent from my Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
Well I almost did mine in. Dropped from 2 foot in my otter box. I loca glued another tempered glass on top and as good as new
Debloated at all by chance or no? I read the OP and it said nothing of it so I assume no but I thought I would ask.
Sent from my Samsung SM-G950U using XDA Labs
bradical711 said:
Debloated at all by chance or no? I read the OP and it said nothing of it so I assume no but I thought I would ask.
Sent from my Samsung SM-G950U using XDA Labs
Click to expand...
Click to collapse
Nope. I figured keep it full as soon as anything where to come out you woulda wanted that. Lol. Fully bloated. Plus it gives each of you something to do for the day...???
Any chance of seeing a super stock BRB1 IMG sometime soon at all?
Sent from my Samsung SM-G950U using XDA Labs
bradical711 said:
Any chance of seeing a super stock BRB1 IMG sometime soon at all?
Sent from my Samsung SM-G950U using XDA Labs
Click to expand...
Click to collapse
I would assume its the same method as this i will download the firmeware to day and extract it all and post it up:good::good::good:
remember we can only go as far as u2 is.... and no oreo as we do not have a permissive kernel..
On a side note some reason I cant download firms from sam mobile so Im using some off site no name site But will upload em to my drive for your pleasure of downloading
And on a second side note you should be able to more or less dirty flash this one But I would reflash SU and busy box just incase as well as any other system based mods you do Cause as again this will be 100% stock so any debloation you have done will be undone again This note is for any one already running the stock rooted system not coming from other roms
bradical711 said:
Any chance of seeing a super stock BRB1 IMG sometime soon at all?
Sent from my Samsung SM-G950U using XDA Labs
Click to expand...
Click to collapse
It is done good sir
TheMadScientist said:
It is done good sir
Click to expand...
Click to collapse
Thank you so much! I greatly appreciate it. I will update to the stock (BRB1) IMG when I'm off work later and update from PartCyborgs (BQL1) which I've been using as my daily driver for months on end lol. Anyways, thank you again, it is much appreciated by me and the community!!
Sent from my Samsung SM-G950U using XDA Labs
By the way @TheMadScientist, you should make a correction to your OP about your build number versions. One of them is wrong. Specifically when you say the build number BLQ1 twice in the OP. It should be BQL1 instead of BLQ1 so people don't get confused. I know it's a minor typo but I thought I'd point it out. Or maybe you noticed but didn't care to fix it, who knows lol. Also, quick question, is there anyway I could go about deodexing these ROMS of yours? Or should I message PartCyborg how to go about it?
Sent from my Samsung SM-G950U using XDA Labs
bradical711 said:
By the way @TheMadScientist, you should make a correction to your OP about your build number versions. One of them is wrong. Specifically when you say the build number BLQ1 twice in the OP. It should be BQL1 instead of BLQ1 so people don't get confused. I know it's a minor typo but I thought I'd point it out. Or maybe you noticed but didn't care to fix it, who knows lol. Also, quick question, is there anyway I could go about deodexing these ROMS of yours? Or should I message PartCyborg how to go about it?
Sent from my Samsung SM-G950U using XDA Labs
Click to expand...
Click to collapse
I can't remember what he used to to it. I would msg him. I'll fix typos later lol. I didn't even notice
So now after several weeks. I can most def say cyborgs rom has much better battery life. Than stock. I still make it through the day but at the end I'm finding myself with 25 to 35% now instead of 35 to 55
I have slightly underclocked. And a few build prop tweaks from back in the day. But seems pretty rock solid....
I'm in oreo g950u.
My bootloader version 3.
is that work? Can you give tutorial in video?
I'm from indonesia.sorry for my bad english
Vicky_666 said:
I'm in oreo g950u.
My bootloader version 3.
is that work? Can you give tutorial in video?
I'm from indonesia.sorry for my bad english
Click to expand...
Click to collapse
This will not work with BL 3. You cannot downgrade either. There is no way for you to root with ANY ROM on the regular S8 above BL 3 as of right now.
Sent from my SM-G950U using XDA Labs
Thanks for the step by step.. I'm hoping to do this with the g950u1 firmware. I am guessing since you said you must start with rooted firm, if I use magisk and get systemless root the add safe strap then proceed to your steps that should put me in the right direction.. then I could make a full system backup to make a flushable stock pre rooted firmware I could store in case of a rainy day.. does this sound logical or am I a bit mistaken?. I'd like to create a true 4 file firmware from a system backup after I make any adjustments or add any apks so that if I ever need to reinstall.. everything will flash without having to readjust settings or use data to download any of the apps/flushable .zip files as well as avoid the need for re writing the build.prop and such. I'm open for any suggestions if you have any. Thanks again!
In first part there is no CP just sys.img SU & BusyBox
So I assume no need of CP there
And in BRB1 there is CP file do we have to flash that thru regular Odin or we can skip that.
Thanks
MalharB said:
In first part there is no CP just sys.img SU & BusyBox
So I assume no need of CP there
And in BRB1 there is CP file do we have to flash that thru regular Odin or we can skip that.
Thanks
Click to expand...
Click to collapse
You can flash that to update your baseband to the latest rootable with Odin. Just so you can have all the latest updates possible
The CP is totally optional though
TheMadScientist said:
You can flash that to update your baseband to the latest rootable with Odin. Just so you can have all the latest updates possible
The CP is totally optional though
Click to expand...
Click to collapse
Thanks
I've recently installed TWRP on my Note 20 Ultra (Exynos) and deeply regret . It's very usefull and all but not enough to lose Knox encryption and other features of this device, soo does someone know how to restore it as default?
Marhein said:
I've recently installed TWRP on my Note 20 Ultra (Exynos) and deeply regret . It's very usefull and all but not enough to lose Knox encryption and other features of this device, soo does someone know how to restore it as default?
Click to expand...
Click to collapse
Afaik you can only get back stock recovery by flashing stock firmware via Odin or Heimdall.
Everything will be wiped doing that.
bmwdroid said:
Afaik you can only get back stock recovery by flashing stock firmware via Odin or Heimdall.
Everything will be wiped doing that.
Click to expand...
Click to collapse
Thanks for replying, but i'm kinda new in this field and I'm not sure how to do this, so if U can could U explain in a more detailed specific way, I would be even more glad, thanks. What can I do I'm a newbie ksksks.
Marhein said:
Thanks for replying, but i'm kinda new in this field and I'm not sure how to do this, so if U can could U explain in a more detailed specific way, I would be even more glad, thanks. What can I do I'm a newbie ksksks.
Click to expand...
Click to collapse
Well, as you've already flashed TWRP you have some experience already.
Use Samfirm_reborn.0.3.6.3 to download multiple! (by checking "binary nature") part stock firmware.
Get device into download mode and flash the files (Ap to AP, bl to BL, aso) in Odin 3.14 and above.
bmwdroid said:
Well, as you've already flashed TWRP you have some experience already.
Use Samfirm_reborn.0.3.6.3 to download multiple! (by checking "binary nature") part stock firmware.
Get device into download mode and flash the files (Ap to AP, bl to BL, aso) in Odin 3.14 and above.
Click to expand...
Click to collapse
Nice. Thanks for the support!
Marhein said:
Nice. Thanks for the support!
Click to expand...
Click to collapse
You're welcome.
Did it work?
Marhein said:
I've recently installed TWRP on my Note 20 Ultra (Exynos) and deeply regret . It's very usefull and all but not enough to lose Knox encryption and other features of this device, soo does someone know how to restore it as default?
Click to expand...
Click to collapse
costum rom with rom original
bmwdroid said:
You're welcome.
Did it work?
Click to expand...
Click to collapse
Yep it did, seriously U seved my life ksksks. I literally had no ideal how to do and that it would be so easy. Thanks!
Marhein said:
Yep it did, seriously U seved my life ksksks. I literally had no ideal how to do and that it would be so easy. Thanks!
Click to expand...
Click to collapse
Good to hear.
You can mark the thread as "solved" so that other users find a solution directly when searching.
bmwdroid said:
Well, as you've already flashed TWRP you have some experience already.
Use Samfirm_reborn.0.3.6.3 to download multiple! (by checking "binary nature") part stock firmware.
Get device into download mode and flash the files (Ap to AP, bl to BL, aso) in Odin 3.14 and above.
Click to expand...
Click to collapse
Hi there again bmwdroid,
So I've succeeded on installing the stock recovery system on my Galaxy Note, but the main reason that i wanted to "restore" it was to recover Samsung Knox encryption and regain access to the Samsung Pay and Pass functionnalities. So do U know if it's possible to solve it without sending to a Samsung authorized support or that's the only way to regain access to those functions? And just one more thing I've downloaded the right files from Samfirm_reborn.0.3.6 as U said it and flashed the right files(AP and BL), but I've asked myself if it's needed to flash the other ones (CP, CSC_OWO and HOME_CSC_OWO) and if it's needed where do I flash the CSC_OWO and the HOME_CSC_OWO since I can't flash two CSC files in the same flashing port.
Once again thank U for the support and I hope U can answer these questions.
Marhein said:
Hi there again bmwdroid,
So I've succeeded on installing the stock recovery system on my Galaxy Note, but the main reason that i wanted to "restore" it was to recover Samsung Knox encryption and regain access to the Samsung Pay and Pass functionnalities. So do U know if it's possible to solve it without sending to a Samsung authorized support or that's the only way to regain access to those functions? And just one more thing I've downloaded the right files from Samfirm_reborn.0.3.6 as U said it and flashed the right files(AP and BL), but I've asked myself if it's needed to flash the other ones (CP, CSC_OWO and HOME_CSC_OWO) and if it's needed where do I flash the CSC_OWO and the HOME_CSC_OWO since I can't flash two CSC files in the same flashing port.
Once again thank U for the support and I hope U can answer these questions.
Click to expand...
Click to collapse
Well I probably can't answer all but will try to.
If Knox has been triggered there is afaik no way to untrigger it again as it's a hardware switch.
You only need one CSC.
Can't remember which of the 2 will let you keep your DATA .
Edit: found it. That was easy.
bmwdroid said:
Well I probably can't answer all but will try to.
If Knox has been triggered there is afaik no way to untrigger it again as it's a hardware switch.
You only need one CSC.
Can't remember which of the 2 will let you keep your DATA .
Edit: found it. That was easy.
Click to expand...
Click to collapse
Okay, thanks again. I'm marking this thread as solved... Even though I didn't exactly finished what I wanted I thank your help and hope this thread can help other users to solve their problems.