Hi I have a problem with a ZTE kis plus I tried to reinstall the operating system installed lam after gave me white screen can not enter recovery mode any mode nor can I enter adb not detect any device that would be the solution?
Zte kis plus
no response give me until after I solved by installing FireFox after android OS but it is a strange version sometimes give errors even if you reply to this topic with a ROM for ZTE kis plus
Hello,
I have a tablet Ramos W17 PRO V3.
For some time, it will not boot and stuck on boot logo "RAMOS"
I get to go to android system recovery
I tried to put a customrom "ramos_w17pro_cm10_sign" found on the internet but it does not change the problem.
I can not install the original firmware.
Is someone can help me or have a rom for my tablet?
thank you
tecsaif said:
Hello,
I have a tablet Ramos W17 PRO V3.
For some time, it will not boot and stuck on boot logo "RAMOS"
I get to go to android system recovery
I tried to put a customrom "ramos_w17pro_cm10_sign" found on the internet but it does not change the problem.
I can not install the original firmware.
Is someone can help me or have a rom for my tablet?
thank you
Click to expand...
Click to collapse
Nobody owns this tablet and can help me?
Hi everyone,i really noob on this......how to get into recovery mod? And i also need a Lenovo A396 Flashtools,USB driver,and whatever to solve this problem,,please help me guys.
DANG~~ :silly:
reply
iamfy said:
Hi everyone,i really noob on this......how to get into recovery mod? And i also need a Lenovo A396 Flashtools,USB driver,and whatever to solve this problem,,please help me guys.
DANG~~ :silly:
Click to expand...
Click to collapse
Are u rooted ??
sksenthil said:
Are u rooted ??
Click to expand...
Click to collapse
i never do anything.. :crying:
Here is a guide to root your phone and you will get your recovery (in this case cwm).
[ROOT][CWM][ROM's] Lenovo IdeaPhone (LePhone) K860(i)
Well good luck! xD
GuiltyGod said:
Here is a guide to root your phone and you will get your recovery (in this case cwm).
[ROOT][CWM][ROM's] Lenovo IdeaPhone (LePhone) K860(i)
Well good luck! xD
Click to expand...
Click to collapse
hi guiltygod,
i open my windows 8 device manager & 4 exclaimation marks show up in Lenovo A396
does that mean my phone is not rooted?
if so how to root A396?
my phone android is 2.3.5
kernel 3.10.17
software version A396_S162_140528
hardware version H201
Thank you very much.
lenovo a396 turning on problem
we have the same phone which is lenovo a396 the problem on my phone it will just show the boot animation and it will not turn on , pls.... anyone help me, maybe some of you know where to find the specific fixtool for a396 and usb driver , anyone help.......
xeonite said:
hi guiltygod,
i open my windows 8 device manager & 4 exclaimation marks show up in Lenovo A396
does that mean my phone is not rooted?
if so how to root A396?
my phone android is 2.3.5
kernel 3.10.17
software version A396_S162_140528
hardware version H201
Thank you very much.
Click to expand...
Click to collapse
have u managed to do t , i need to root thi sphone as well?
FOLLOW THE TUTORIAL worked for me
youtube.com/watch?v=pxgdV9SQLmE
prefix with dot www
RE: Bootloop | Stuck Logo | custom rom (Needrom.com)
Hi, guys.
I got a solution for flashing Lenovo a396. I tested before, my brother has this exact phone and got stucked on logo. i tried this rom downloaded from Needrom.com and success to flashing without no problem.
LINK: goto needrom_com
~All necessary drivers available to download
~To download, you have to register and its free.
DESCRIPTION
***************
Lenovo A396 Official S221
Plus :
+ Root
+ Changed the first boot picture to new official Lenovo logo
Install the Rom :
- download all files
- install the drivers
- run the ResearchDownload.exe file
- load .pac file
- click on the play button
- Switch off the phone push the volume down button and connect to PC via factory USB cable
- the ResearchDownload recognize the phone, and start the rom flash
- some min later the ResearchDownload wrote "[Removed] Passed" If you see this, then the rom flash is ready
- remove the battery wait 5 sec and put back the battery. Switch on the phone
- ready
---------- Post added at 11:14 PM ---------- Previous post was at 11:04 PM ----------
sksenthil said:
Are u rooted ??
Click to expand...
Click to collapse
If you want to root Lenovo A396,
1- i suggest you try KINGOROOT via PC.
2- Open the software, you need to go to ENABLE USB DEBUGGING first on the phone.
3- Proceed this method while you computer connecting into the internet.
(You just follow all the instructions on the screen, all drivers automatically downloaded- just sit back and relax):fingers-crossed::laugh:
Hi All
I am stuck with the below message, any ideas how i can get past this ?
Thank you
Me too
zayn81 said:
Hi All
I am stuck with the below message, any ideas how i can get past this ?
Thank you
Click to expand...
Click to collapse
I get the same problem after installing gapps on vibeUI. I tried 3 or 4 versions of vibeUI including 1526 (android 5.1) and all af them got me the same problem after installing gapps with CWM.
I have the same problem now too..
Anyone please help us
Finally started.
akosimeko said:
I have the same problem now too..
Anyone please help us
Click to expand...
Click to collapse
zayn81 said:
Hi All
I am stuck with the below message, any ideas how i can get past this ?
Thank you
Click to expand...
Click to collapse
I found out that you can get "unstuck" by copying other version of VibeUI (may work with the same version - didn't test it) on the root of your internal memory or sdcard and rename it "update.zip". Power off the phone, wait 10 seconds, Vol+ Vol- Power and from the recovery press install update. After that the phone will boot up normally.
IMPORTANT!: After installing gapps again got the same problem. EVERY TIME!. If someone gets gapps working on vibeUI please share the steps.
i bricked my phone i flashed a file over the bootloder i have TWRP Installed Please help i removed the OS And Bootloder
And now it just comes up with the ZTE Splash screen the turns off and Reapets please helppppppppppppppppppppppppppp meeeeeeeeeeeeeeeeeee video will come out soon
ChrisAndoidYT said:
i bricked my phone i flashed a file over the bootloder i have TWRP Installed Please help i removed the OS And Bootloder
And now it just comes up with the ZTE Splash screen the turns off and Reapets please helppppppppppppppppppppppppppp meeeeeeeeeeeeeeeeeee video will come out soon
Click to expand...
Click to collapse
Did you success to unbrick your phone?
Bricked ZTE Blade S6
Hi i have bricked my ZTE Blade S6 while trying to run official update. No its with a black screen and when i connect it to Laptop it detects as Qualcomm HS-USB QDLoader 9008 (COM3). Kindly help me to unbrick this