My tablet getting kernel panic very often after it updated Lspeed to Alpha version, and it is already enabled
theshareisgod said:
My tablet getting kernel panic very often after it updated Lspeed to Alpha version, and it is already enabled
Click to expand...
Click to collapse
What kind of issues you have? Can you be more specifics, also provide me last_kmsg after reboot happens.
it was random reboots. Today problem is gone. how do i provide last_kmsg?
theshareisgod said:
it was random reboots. Today problem is gone. how do i provide last_kmsg?
Click to expand...
Click to collapse
On to next boot, copy or over kennel adiutor
Sent from my Nexus 5 using Tapatalk
Related
hey...
got problem with com.android.systemui process, sometimes im getting these fcs, after trying to swipe down my finger on my statusbar. Then whole system freezes and reloading ui... dont know why. Sometimes it reboots, and after reboot keep getting same fc's. Im using default theme and Nova Launcher
im using newest sultanxda cm11... pls help ;(
That's a known bug in cm, nothing you can do about it.
Sajito said:
That's a known bug in cm, nothing you can do about it.
Click to expand...
Click to collapse
okay, but it was good few build ago...
Theoretically the latest 3 builds from sultan should be affected by that bug.
Sajito said:
Theoretically the latest 3 builds from sultan should be affected by that bug.
Click to expand...
Click to collapse
they r... sultan knows about this?
hexen88 said:
they r... sultan knows about this?
Click to expand...
Click to collapse
I think so, not sure though, but I don't think he can do anything about it.
Hey ! I've got the same problem but it's only happen when I close my application clash of clans ! I can't down the status bar and then the same message...
SOURCE | CREDITS | DISCLAIMER | DOWNLOADS | FEATURES
...
OT Discussions are allowed(healthy way to help and get help on forums) just make sure noone gets ahead of themselves and forgets this is a development thread..you are all entitled to your own opinion just be respectful and always remember that you are on XDA..to our dear mods any discussion that destroys the credibility of my hard work or any post that may be disrespectful in nature can be considered offensive and is subject to your moderation..
...
one more incase of emergency..
kairi_zeroblade said:
one more incase of emergency..
Click to expand...
Click to collapse
no credits to your team mate? thanks bro lol.
xXminiWHOOPERxX said:
no credits to your team mate? thanks bro lol.
Click to expand...
Click to collapse
YGPM..fixed as of this moment..
edit
..all wiki's too
edit1
..this is all too phenomenal..3 people only downloaded..
kairi_zeroblade said:
YGPM..fixed as of this moment..
edit
..all wiki's too
edit1
..this is all too phenomenal..3 people only downloaded..
Click to expand...
Click to collapse
What is YGPM?
abzboi said:
What is YGPM?
Click to expand...
Click to collapse
You Got Personal Message
kairi_zeroblade said:
You Got Personal Message
Click to expand...
Click to collapse
The download is at htc one mini right? When you click the htc one mini on the right side and download that package and flash it right? Thats what I did. If I did something wrong please let me know.
abzboi said:
The download is at htc one mini right? When you click the htc one mini on the right side and download that package and flash it right? Thats what I did. If I did something wrong please let me know.
Click to expand...
Click to collapse
yup thats right..
You should post the features and download link in here too. More people will look at it because the information of the kernel is included.
is there a way to get dt2w and s2w working permanently? i need synapse to load and it takes time and manually enable them under sys/android_touch didn't work.
and i get fc when trying to change cpu governor to msm dcvs.
other than that the kernel works flawlessly and is flying (17774 on AnTuTu)
rosi91 said:
is there a way to get dt2w and s2w working permanently? i need synapse to load and it takes time and manually enable them under sys/android_touch didn't work.
and i get fc when trying to change cpu governor to msm dcvs.
other than that the kernel works flawlessly and is flying (17774 on AnTuTu)
Click to expand...
Click to collapse
You can edit it in sys/customization/android touch something like that i think. then edit the d2w and s2w. change both to 1
rosi91 said:
is there a way to get dt2w and s2w working permanently? i need synapse to load and it takes time and manually enable them under sys/android_touch didn't work.
and i get fc when trying to change cpu governor to msm dcvs.
other than that the kernel works flawlessly and is flying (17774 on AnTuTu)
Click to expand...
Click to collapse
abzboi said:
You can edit it in sys/customization/android touch something like that i think. then edit the d2w and s2w. change both to 1
Click to expand...
Click to collapse
use synapse..MSM Governor is just like a Dummy Governor..do not use it..else your phone will be unstable..you can permanently enable DT2W and S2W from synapse..have you read the preface message from the app??it will save your preferred setting and have to be able to stay stable within 20 seconds for synapse to remember it..upon reboot just wait for Synapse to fully load your settings and you have it automatically enabled..
can someone here confirm that your chip can go 1.8Ghz..well never saw a someone go within that range also as far as documentation from Qualcomm is concerned the Snapdragon 400 Cortex A7 SOC can just go up to 1.7Ghz..
Edit:
here's a soooooo much silent Community..
kairi_zeroblade said:
use synapse..MSM Governor is just like a Dummy Governor..do not use it..else your phone will be unstable..you can permanently enable DT2W and S2W from synapse..have you read the preface message from the app??it will save your preferred setting and have to be able to stay stable within 20 seconds for synapse to remember it..upon reboot just wait for Synapse to fully load your settings and you have it automatically enabled..
Click to expand...
Click to collapse
yeah i read that message and it worked too but sometimes my phone won't load synapse for some reason. I also have to unlock my sim right when starting the phone. if display is off for a second or more my phone won't recognize any touch anymore...
rosi91 said:
yeah i read that message and it worked too but sometimes my phone won't load synapse for some reason. I also have to unlock my sim right when starting the phone. if display is off for a second or more my phone won't recognize any touch anymore...
Click to expand...
Click to collapse
file an issue on my github tracker..attach a logcat of that happening..so i can address it..i do not own the unit FYI..i am still familiarizing myself with how your phone works..
Anyone already filed an issue on my tracker with logs??come on guys..how am i suppose to solve/improve things..lolz..
BTW anybody want a aosp kernel from me?? ?
how do i get the logcat? tried adb logcat put there are why to many lines in cmd and can't get all. can i pull the logcat and convert it into a .txt file or anything similar?
rosi91 said:
how do i get the logcat? tried adb logcat put there are why to many lines in cmd and can't get all. can i pull the logcat and convert it into a .txt file or anything similar?
Click to expand...
Click to collapse
i think there is an app called syslog..in google play that can help obtain logs..AFAIK it also needs root..
I think there was a kernel for cm that could go up to 2ghz
Need testing ill do them? I'll pull syslogs
Sent from my HTC One mini using Tapatalk
New build is up..time to get the "Very Silent Treatment" once more..
please keep in mind, that I only own a note2 lte
If something isn't working, you need to provide a logcat. Otherwise it won't get fixed. I can't reproduce things myself!
New build up
big thx to @sbrissen for his help and many of the device fixes
not working:
Wifi must be turned on, (doesn't need to be connected just has to be on) otherwise you may experience reboots when screen turns off.
gps
cm cam?
Click to expand...
Click to collapse
working:
everything else
Click to expand...
Click to collapse
In any case, please provide logcat and/or last_kmsg if something isn't working as expected.
Disable sim pin lock before flashing! It's known to be broken on other devices and would cause your simcard to be locked permanently (you would need to order a new one).
Rom:
https://mega.co.nz/#!IE1kmTpT!C_xHggO3tQaRCm3BDt6WauNJaSTVUA2jEZ-rjcmNP7Q
Gapps for 5.0:
https://s.basketbuild.com/gapps
Gapps mirror:
https://mega.co.nz/#!5R0D1B4L!1zP2aiDzlBAQ05I4UkgTNaVVLQME9Yjj1Fl7nwAPzs0
reserved .....
DerTeufel1980 said:
reserved .....
Click to expand...
Click to collapse
Thanks for your GPS fix by the way.
@DerTeufel1980 Thank you dude. How can I disable the sim lock, by turning airplane mode on?
infrag said:
Thanks for your GPS fix by the way.
Click to expand...
Click to collapse
Your welcome ?
Did you successfully build cm12 yourself? Do you get unknown baseband issue?
limnaln said:
@DerTeufel1980 Thank you dude. How can I disable the sim lock, by turning airplane mode on?
Click to expand...
Click to collapse
Setting security sim pin. This needs to be set on your current rom, before flashing this one.
DerTeufel1980 said:
Your welcome ?
Did you successfully build cm12 yourself? Do you get unknown baseband issue?
Setting security sim pin. This needs to be set on your current rom, before flashing this one.
Click to expand...
Click to collapse
Hi!
First of all, thanks for your work! But I couldn't get into the rom, it's stuck on the boot logo every time.
Could be selinux related. I didn't disable it, to see if baseband is working with it.
Can you get me a logcat please? Then I'll upload a new one in few hours (hopefully)
Keep in mind, I don't own this device. Without logs, nothing is going to happen
DerTeufel1980 said:
Could be selinux related. I didn't disable it, to see if baseband is working with it.
Can you get me a logcat please? Then I'll upload a new one in few hours (hopefully)
Keep in mind, I don't own this device. Without logs, nothing is going to happen
Click to expand...
Click to collapse
If you tell me how to give you one,of course.
DerTeufel1980 said:
Your welcome ?
Did you successfully build cm12 yourself? Do you get unknown baseband issue?
Setting security sim pin. This needs to be set on your current rom, before flashing this one.
Click to expand...
Click to collapse
Didnt try CM by itself no.
Nameless boots & so does Archi and they are based on CM. Didnt check to see if baseband was working I can try if your interested. (maybe i should compare radio logs so it may be a good idea)
I have Omni booting and Slim though.. they have no baseband as yet. I've tried this : https://gerrit.omnirom.org/#/c/10593/ with a few other things but no luck yet.
---------- Post added at 06:22 AM ---------- Previous post was at 06:21 AM ----------
zimonyini said:
If you tell me how to give you one,of course.
Click to expand...
Click to collapse
How to make Useful logs:
http://forum.xda-developers.com/showthread.php?t=2185929
DerTeufel1980 said:
Could be selinux related. I didn't disable it, to see if baseband is working with it.
Can you get me a logcat please? Then I'll upload a new one in few hours (hopefully)
Keep in mind, I don't own this device. Without logs, nothing is going to happen
Click to expand...
Click to collapse
Hope its good. Sent it from amcha rom
Finally someone steps up to develop/port a lollipop rom for i9305 and he doesn't even own the device. Respect dude! I really appreciate your baldness
zimonyini said:
Hope its good. Sent it from amcha rom
Click to expand...
Click to collapse
You were taking this log, while you have been in the bootloop of my rom? If so, how did you flash it? There were some logs which seemed to be caused by touchwiz stuff.
Please format system, wipe data, and then reflash just the rom, without gapps.
If it still fails to boot, get me another log.
Everyone else can also feel free to do so.
Nice work mate... Sorry I couldn't do it myself lol. Just not enough knowledge. Hope we can get ril fully working soon
Sent from my GT-I9305 using XDA Free mobile app
DerTeufel1980 said:
You were taking this log, while you have been in the bootloop of my rom? If so, how did you flash it? There were some logs which seemed to be caused by touchwiz stuff.
Please format system, wipe data, and then reflash just the rom, without gapps.
If it still fails to boot, get me another log.
Everyone else can also feel free to do so.
Click to expand...
Click to collapse
O my God! I know you from when I used HellyBean on my S1, it was the best rom for me for a long time, I know it's a bit early to ask espetially since you don't own this device, but is there any chance we will see a HellyBean cm12 for our i9305. Your work is sublime
Can someone dirty flash over lollipop slimpop and see how it goes???
Sent from my GT-I9305 using XDA Free mobile app
You could just take the boot.IMG out and switch them...
Ehh too much effort right now lol
Sent from my GT-I9305 using XDA Free mobile app
infrag said:
You could just take the boot.IMG out and switch them...
Click to expand...
Click to collapse
It boots now but baseband unknown
mermigas said:
It boots now but baseband unknown
Click to expand...
Click to collapse
I didnt say it would fix RIL problems did I? I just said it would boot...
infrag said:
I didnt say it would fix RIL problems did I? I just said it would boot...
Click to expand...
Click to collapse
Correct. But I was just hoping.........:crying:
It's not too simple!
I have installed Android M one month ago and in the last two days my phone started to reboot at anytime. When I'm using it, like in a call or browsing with google chrome, this **** reboot
I REALLY DON'T KNOW WHAT TO DO!
Thanks for any answer!
Sorry about my english, I'm from BRAZIL kk
Give us more info... Like...
Completely stock?
Rooted?
Custom kernel?
System changes made?
Sent from my Nexus 5 using Tapatalk
this sometime happens to me too..
i'm using dev preview 2, supersu 2.49 and electroactive kernel
will try to get last_kmsg next time
Riekr said:
this sometime happens to me too..
i'm using dev preview 2, supersu 2.49 and electroactive kernel
will try to get last_kmsg next time
Click to expand...
Click to collapse
Sorry, I'm using Dev Preview 1 and the stock kernel [emoji4]
Sent from my SM-N9005 using Tapatalk
Check battery heat. Or cpu heat.
bender_007 said:
Check battery heat. Or cpu heat.
Click to expand...
Click to collapse
Thanks, I have changed my charger and it works fine [emoji1]
Someone reports that Net TCP tweaks make a problem with signal strength and after a while device lose it.
Attached APK with possible fix
People with similar issue, please do a test
@holymoz anything new, since you reported issue???
Sent from my Nexus 5 using Tapatalk
@Paget96 , no problem, seems that this alpha works good.
if I want to use the stable how do i know when tis fix merged with the playstore vesion?
holymoz said:
@Paget96 , no problem, seems that this alpha works good.
if I want to use the stable how do i know when tis fix merged with the playstore vesion?
Click to expand...
Click to collapse
It'll be on next update. Now, remove alpha and install stable from playstore again, and test again. We have to be 100% sure that alpha fixed a problem.
Please do a full report after installing stable again. Whats happened, when and how.
Thanks
ok
holymoz said:
ok
Click to expand...
Click to collapse
Anything to report?
Paget96 said:
Anything to report?
Click to expand...
Click to collapse
with old stable I haven't noticed problem anymore, but I tested only 1 day, now I'm on new stable and no problem.
maybe maybe it's just me but I sense more battery drain, have to test some days, probably it's nothing to do with lspeed.