With firmware device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!
Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
Restoring killed (brick) on the device after unsuccessful flashing - https://forum.xda-developers.com/showpost.php?p=75664396&postcount=3254.
Only for devices MTCD 1024X600 and 800X480 Android 6.0.1MTCD PX5!!!PX5 Android 8 !! - https://forum.xda-developers.com/an...-malaysk-roms-px5-2-4-gb-8-0-android-t3762724
Only for those who have access to recovery (originally trying to get into it and reset key combinations) !!!++++++++++++++++++++++++++++++++++++++++++++++++++ ++
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"
++++++++++++++++++++++++++++++++++++++++++++++++++ ++
Installation:
Unzip the archive and copy the file Update.img to the SD card.
Insert the SD card into the slot.
Go to Settings - About - Update and set the daw to the Wipe data and click on the button - Install.
++++++++++++++++++++++++++++++++++++++++++++++++++++
Version 1.0 of April 30, 2017.
Android platform from April 14, 2017 (based on the firmware)
Built-in Root latest SuperSU (hidden root access).
+ Built-in Xposed
+ Application signature check disabled
+ Removed garbage (Chinese keyboards, Maps and more)
+ Added programs - Root Explorer, ES File Explorer, TitaniumBackup
+ Slightly adjusted launcher.
+ BusyBox
+ Added screensaver. Disable in Settings - Screen- Screensaver (Default is 5 minutes)
+ Settings - corrected Russian translation.
+ New item in Settings - System and Screen (here all new added items are located)
- Date and Time in the status bar
- Screen Density
- Speed of outgoing and incoming Internet in the status bar
- Change font and its system size
- Block all advertising from the Internet
+ Settings for the developer are displayed in Settings
+ Redesigned appearance of the equalizer
+ Added a reboot button and reboot in the recovery in StatusBar
+ New Settings item - Display - Bar Status Settings - Gradient status bar. You can make a transparent StatusBar there or add any color.
+ There are many programs in the OEM application. Install as normal applications. Delete them afterwards - go to Settings - Applications - Delete the update.
+ Added settings - flight mode, mobile data transfer, setting up APN
+ Added settings - Ethernet
+ New Settings - System - Auto Backup
+ Decreased the height of the StatusBar
+ Added support for Init.d
+ Added PCRadio (Internet radio) (can be deleted in Settings - Applications)
+ Redone the standard audio control
+ Redesigned graphic design of pop-up messages.
+ Added module for Xposed - Xposed VolumeBar (completely changes the volume control)
+ Added module for Xposed - Disable Fullscreen Keyboard - http://repo.xposed.info/module/com.shubhangrathore.xposed.disablefullscreenkeyboard
+ Added new Settings. Now you can completely customize the icons in StatusBar. Are in Settings - Display-Settings Bar Status - Hide - Show Icons in StatusBar
And there we include what you need.
+++++++ and a lot of other things (long to write - then add to the message)
The first download after the firmware will be very long 15-20 minutes !!!
Download: https://yadi.sk/d/wRF3mPjS3HVgMo
=====================================================
New from May 17, 2017, Firmware No. 2.0
+ Android platform from May 6, 2017
+ Completely new screensaver with GPS speed and Weather function.
+ Added new time values in Settings - Screen - Start time of the screensaver 2 and 3 minutes.
+ Added to Settings -Ascreen - Weather on the screen (Weather settings in the screensaver .There can be turned on - Disable the weather display.
Do not forget to enable Settings - Location - By All Sources !! For automatic weather display. (You need a connected internet in the device)
+ A new, remastered Launcher.
+ The application Bluetooth is redesigned. Now display the phone and the name of the contact in two lines.
+ Completely redesigned the application Music. A square picture.
+ Redesigned the Radio and Video application.
+ The launcher HA-GS has been added to the OEM promo. You can install it. Change launcher in Settings - Desktop and there choose the launcher that you want to use the default.
+ A new module for displaying the speed over GPS in the screensaver - gps-mtc-launcher.
In the archive, along with the firmware, there is a folder called mtc-launcher, it must be copied to the root of the internal memory card (SDCARD) with using ES File Explorer.
And you must activate the GPSMtcLauncher module in Xposed !!!!
In the folder Copy_To_internal_sd (SDCARD) - From MPH - to display the speed in MPH (US and others)
In the folder Copy_To_internal_sd (SDCARD) - From KM - to display the speed in KM / H (Russia, Europe and others)
+ Converted Factory Settings for more convenient display.
+ In the OEM application in the Factory app folder there are factory applications - not reworked. You can install them if you do not like my application. Delete them later in Settings - Applications - Delete update.
+ Other fixes and additions.
The first download after the firmware will be very long 15-20 minutes !!!
Connecting Modules Xposed here
Download: https://yadi.sk/d/U-UjLXbC3JDmt3
=====================================================
July 09, 2017, Firmware No. 3.0
At whom the firmware number 2 is installed and will simply update: make backup of your programs! If there are errors, then you need to do the wipe data (all your programs will be deleted)
+ Android platform from July 3, 2017
+ Added weather to launcher's desktop (can be disabled in Settings) (Set in Settings - Display - Weather settings)
+ New Radio application - 30 stations, you can write your station names.
+ Added to Settings - Screen - Auto screen brightness by GPS.
+ Added ViPER4Android
+ Reduced Status Bar and made semi-transparent.
+ Added the program CarSleepRun (thank you very much to the author of the program graser) to run programs after sleep (white list).
+ Added the program MtcDialer, for voice calls. (Many thanks to the author of the program f1x)
+ Other changes and additions.
Problem 1: When installing a new module for Xposed, the error "An error occurred in the GUI".
It is necessary to reboot the device, the error disappears.
The first download after the firmware will be very long 15-20 minutes !!!
Download: https://yadi.sk/d/dPronKGV3Kt6FF
=====================================================
July 25, 2017, Firmware No. 3.5 with MicroG
+ Google services are removed, instead of them are installed MicroG
+ Other fixes.
After installation go to MicroG Settings and activate Google Services and reboot!
It is recommended to install the firmware with data deletion - Wipe Data
The first download after the firmware will be very long 15-20 minutes !!!
Download: https://yadi.sk/d/hDhwB-BX3LPDVK
=====================================================
July 28, 2017, Firmware No. 4.0 (stable) with Google Services
+ Bug "There was an error in the GUI (SystemUI)"
+ Fixed bluetooth for resolution 800X480
+ Fixes that were added in version 3.0-3.5
+ In the archive with the firmware there is an application for auto-brightness on GPS
+ Other
The first download after the firmware will be very long 15-20 minutes !!!
Download: https://yadi.sk/d/uc8Zux8t3LW4nD
=====================================================
September 7th, 2017, Firmware No. 5.0
1. Android base from September 1, 2017 (factory firmware HA)
2. Updated all Google services, root access, busybox, etc.
3. New versions of regular applications with a quick access panel and without it (install from the OEM application in the ModApk folder)
4. New version of the screensaver 2 in 1. With a long press on it, the screen changes from analog clock to digital.
From the first time can not work. Go to Settings - Screen - The time to start the screensaver is set to 15 seconds and wait for its launch.
Click 2-3 sec. on it.
5. Added different time values for launching the screensaver in Settings - Screen - Launch time of the screensaver Never-15-30-60 seconds-2-3-5-7-10 minutes.
6. Added information about the song being played from the regular Music in the screensaver. Thanks for the help graser.
7. The HA launcher is in the OEM application in the Launchers folder.
8. You can install live wallpaper (in the previous version of the firmware they disappeared after the reboot)
9. A lot of other fixes and additions.
VIDEO : https://youtu.be/dwTsMtLp0RM
Download: https://yadi.sk/d/ouDv5oAo3Mh7M5
=====================================================
New from November 22, 2017, Firmware № 6.0
1. Android platform from November 7, 2017 (factory firmware HA)
2. Updated all Google services, etc.
3. Four versions of standard applications (set from of the OEM application in the ModApk folder)
4. Updating the screensaver 2 in 1 (bug fixes). With a long press on it, the screen changes from analog clock to digital.
You can disable it in Settings-Screen - Time to start the screensaver. To show the speed of the GPS in it, you need to activate the module Xposed - GpsMtcLauncher and copy the folder mtc-launcher (is in the archive together with firmware) to the root of the internal memory card and will reboot.
5. Added startup screensaver in the programs PCRadio and Poweramp.
6. Added start of programs Torque, PCRadio and Poweramp after a dream.
7. 5 launchers, for every taste - are in the OEM application in the Launchers folder.
8. Added the "Moon" icon to the status bar for launching the screensaver (you can turn it off in [color = green] Settings - Display - Bar Status Settings - Hide-Show Icons in Status Bar [/ b] [/ color])
9. A lot of other fixes and additions.
Video instructions for setting up the system - https://www.youtube.com/watch?v=lUvi-TstdaA
Download firmware version 6.0: https://yadi.sk/d/1FVBUPBD3PvaQQ
=====================================================
New from November 24, 2017, Firmware №6.2
1. Fixed a display of the speed of the GPS in the screensaver.
2. Fixed a bug with the release of the app “Amplifier” (Sound adjustment) for the screen resolution 800X480.
2. Fixed a bug with the screensaver when setting the time format to 12 hours.
4. Added startup screensaver in the program Rocket Player.
5. Support Tasker after sleep
6. New regular applications (located in the OEM application in the ModApk folder)
7. Fixed my Radio (lost the saved list of radio stations after the reboot)
Video instructions for setting up the system - https://www.youtube.com/watch?v=lUvi-TstdaA
Download firmware version 6.2: https://yadi.sk/d/4xpGjsMq3Pyypp
New from February 13, 2018, Firmware No. 7.0
Video instruction on setting up the system - https://www.youtube.com/watch?v=YD31zLeNrXc
1. The firmware is made on the basis of the factory firmware from February 1, 2018.
2. Fixed Radio schedule (in my Modified Radio) for 800X480 screen resolution and in the screensaver the Music button.
3. Added screen lock function for PIN code. Enable - Disable in Settings - Screen - Lock screen. The screen lock will occur when the device is fully loaded and when it exits from sleep.
Especially the necessary function, if you leave the car in a car service
4. Updated Xposed to the latest version. If you at the first start Xposed writes that it is not activated - REBOOT the device. Then everything will be fine.
5. Updated Root access (SuperSU) to the latest version.
6. The module for Xposed mtc-launcher is deleted, see below why (duplicate function)
7. Added module for Xposed MVG-V70 (thanks to him for helping me adapt the module for my firmware) xposed-mtce-utils. You can see its settings here - https://forum.xda-developers.com/showpost.php?p=72103289&postcount=2
In the archive, along with the firmware, there are two folders
Copy_To_internal_sd (SDCARD) - From MPH - to display the speed of the GPS in the screensaver in MPH - America, etc.
Copy_To_internal_sd (SDCARD) - From KM - to display the speed by GPS in the screensaver in KM / H - Russia, Europe, etc.
It is necessary to copy the entire folder mtce-utils to the root of the internal (sdcard) memory and activate the module in Xposed !!!!
8. Added module for Xposed graser (thanks to him for helping me adapt the module for my firmware) dasaita-xposed. Read about the module here - http://4pda.ru/forum/index.php?showtopic=820460&st=260#entry62211995
9. Added support for OTA updates.
10. Added three launchers to the OEM application in the Other Launchers folder
11. Much more
I recommend (at your discretion) do Wipe Data.
If you are installing a firmware with Wipe Data, then the first download will be a long 10-15 minutes!
Download Firmware No. 7.0: https://yadi.sk/d/XAJP3pLj3SLp9p
Available OTA update for firmware 7.0 up to version 7.1 (Size: 11 MB) - https://forum.xda-developers.com/showpost.php?p=75599111&postcount=3087
Available OTA update for firmware 7.1 up to version 7.2 (Size: 79 MB) - https://forum.xda-developers.com/showpost.php?p=75657187&postcount=3240
If it does not work GPS and WiFi make a "soft reset" !!! Hold the RESET button for 5-10 seconds until the buttons blink, release RESET. The device will reboot. If you have a dark screen - click on the Power button.If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"
Module settings xposed-mtce-utils for XposedHow to find out the name of the package, the program you want to add in the settings.ini from the xposed-mtce-utils module for Xposed to add to the white list after sleep or to not start the screensaver when the program is started?
It's very simple, download the program QuickShortcutMaker - View attachment QuickShortcutMaker.apk , run it and look at the names of the packages and enter them in settings.ini in the place you need.
Author: MVG-V70
Capabilities:
- White list of applications that do not turn off when the recorder goes to sleep;
- correction of messages mute on / off for old firmware;
- a strip of volume control at the bottom of the screen;
- Hiding icons in the status bar;
- adjustment of the application carousel (switched by the mode button);
- display the name of the radio station in the field for RDS information;
- pop-up messages when switching radio station switching;
- setting the staff player to pause for an incoming / outgoing call;
- pop-up messages when switching tracks in a regular player;
- reassignment of buttons on the front panel of a radio tape recorder;
- change the name of the OBD device;
- display the name of the radio station on the modified widget;
- showing the name of the radio station and the tags of the music tracks in the modified screensaver;
- display teeperators (from canbus) in the modified screensaver;
- Sorting the phone book by Cyrillic characters;
- Speed dialing for a long press of a numeric button.
All settings are in the file in internal memory /sdcard/mtce-utils/settings.ini
Example settings.ini
# hide the volume, brightness and disk eject button false-hide, true-do nothing
[systemui.icons.status]
volume=false
eject=false
screenbrightness=false
# packages of white list applications that are not killed when the device goes to sleep.
[mtce.whitelist]
info.mapcam.droid
org.adaway
com.audlabs.viperfx
com.maxmpz.audioplayer
com.kunkunnapps.os8.keypad
# basic settings
[mtce.settings]
# If the radio is not in the talk mode, you can use the end key as "back"
hangup_as_back=true
# The level of safe volume installed before turning off and back on the radio
volume.safe=10
# Alternative mode for switching packets using the mode button
mode=true
# Alternative screensaver mode: true-enable, false-turn off
screenclock=true
# the names of OBD devices, separated by commas
# If there is no line with the device name, a function is called from the firmware
obd_device=OBD,SPP-DUAL
# GPS time synchronization at power on
sync_gps_time=true
# packages that are switched to the carousel (button MODE)
# in the example of Radio, Music and Video
[mtce.mode]
com.microntek.radio
com.microntek.music
com.microntek.media
# increase the volume depending on the speed
[mtce.speed.volume]
# true-enable, false-off
enable=false
# speed thresholds at which the volume will be increased
speed.volume=40,80,100,120,150
# Increment speed increase, default 1
volume.delta=1
# list of application-exceptions, in which the screensaver will not start:
# in the example of Yandex-maps and navigator and the regular player
[screenclock.exceptions]
com.microntek.media
ru.yandex.yandexmaps
ru.yandex.yandexnavi
com.navitel
# Radio settings
[radio.settings]
# show pop-up messages: true-enable, false-disable, default false
toast=true
# font size of pop-up messages, 24-increased
toastSize=24
# show the name of the radio station in the field for RDS information when RDS is off
# the name of the radio station is taken from the corresponding button.
names=true
# sending information for the modified staff widget
widget=true
# settings of the standard modified widget
[widget.settings]
# show information with the name of the radio station
radio=true
# name of the field with the name of the radio station
radio.name=txt_StationName
# settings of the staff player
[music.settings]
# Alternative cover if the standard does not work. Default is false
cover.alt=true
# pause after a call. false by default
play_after_call=true
# show popup messages when changing a track, default is false
toast=true
# font size of pop-up messages, 24-increased
toast.size=24
# format of the pop-up message, you can use %title%, %album%, %artist%, %filename%
toast.format=%artist% - %title% - %album%
# Bluetooth settings
[bluetooth.settings]
# sorting in the beginning by Cyrillic characters, default is true
sort=true
[bluetooth.quickdial]
# number per button (3) (Long press button 3 in the Bluetooth application)
3=+11111234567
[android.microntek.service#keys]
; dvd -> yandexmaps
app_296=ru.yandex.yandexmaps
[com.microntek.music#keys]
; mute -> pause
event_258=257
Click to expand...
Click to collapse
Connecting Modules XposedIn ES File Explorer сopy the folder to internal memory
Connect modules in Xposed and reboot
I'm full of the recognition for your of work!
Malaysk said:
With firmware device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!
Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
Only for devices MTCD 1024X600 and 800X480 MTCD PX5!!!
Only for those who have access to recovery (originally trying to get into it and reset key combinations) !!!++++++++++++++++++++++++++++++++++++++++++++++++++ ++
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"
++++++++++++++++++++++++++++++++++++++++++++++++++ ++
Installation:
Unzip the archive and copy the file Update.img to the SD card.
Insert the SD card into the slot.
Go to Settings - About - Update and set the daw to the Wipe data and click on the button - Install.
++++++++++++++++++++++++++++++++++++++++++++++++++++
Version 1.0 of April 30, 2017.
Android platform from April 14, 2017 (based on the firmware)
Built-in Root latest SuperSU (hidden root access).
+ Built-in Xposed
+ Application signature check disabled
+ Removed garbage (Chinese keyboards, Maps and more)
+ Added programs - Root Explorer, ES File Explorer, TitaniumBackup
+ Slightly adjusted launcher.
+ BusyBox
+ Added screensaver. Disable in Settings - Screen- Screensaver (Default is 5 minutes)
+ Settings - corrected Russian translation.
+ New item in Settings - System and Screen (here all new added items are located)
- Date and Time in the status bar
- Screen Density
- Speed of outgoing and incoming Internet in the status bar
- Change font and its system size
- Block all advertising from the Internet
+ Settings for the developer are displayed in Settings
+ Redesigned appearance of the equalizer
+ Added a reboot button and reboot in the recovery in StatusBar
+ New Settings item - Display - Bar Status Settings - Gradient status bar. You can make a transparent StatusBar there or add any color.
+ There are many programs in the OEM application. Install as normal applications. Delete them afterwards - go to Settings - Applications - Delete the update.
+ Added settings - flight mode, mobile data transfer, setting up APN
+ Added settings - Ethernet
+ New Settings - System - Auto Backup
+ Decreased the height of the StatusBar
+ Added support for Init.d
+ Added PCRadio (Internet radio) (can be deleted in Settings - Applications)
+ Redone the standard audio control
+ Redesigned graphic design of pop-up messages.
+ Added module for Xposed - Xposed VolumeBar (completely changes the volume control)
+ Added module for Xposed - Disable Fullscreen Keyboard - http://repo.xposed.info/module/com.shubhangrathore.xposed.disablefullscreenkeyboard
+ Added new Settings. Now you can completely customize the icons in StatusBar. Are in Settings - Display-Settings Bar Status - Hide - Show Icons in StatusBar
And there we include what you need.
+++++++ and a lot of other things (long to write - then add to the message)
The first download after the firmware will be very long 15-20 minutes !!!
Download: https://yadi.sk/d/wRF3mPjS3HVgMo
Click to expand...
Click to collapse
greaaaaaaattttttt!
Inviato dal mio SM-G935F utilizzando Tapatalk
Malaysk, your ROM is for me the reason why I will buy PX5 head unit
Good work !
On the other hand, I do not like the home screen, I prefer Erisin's.
Any screenshot of the Radio app?
Sent from my SM-N910F using Tapatalk
The guys who donated money to buy this device - if you are not satisfied with my work on the completion of the firmware - write to me in private messages - I will refund the money. I am an honest person.
Malaysk ..the job is a great Job! Thank you again ! Great!
Inviato dal mio SM-G935F utilizzando Tapatalk
Sassokee said:
Any screenshot of the Radio app?
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
I got the machine 5 days ago. I did not do radio. Time was short. Patience.
Malaysk said:
I got the machine 5 days ago. I did not do radio. Time was short. Patience.
Click to expand...
Click to collapse
No problem, take your time, great work!
Sent from my SM-N910F using Tapatalk
If anyone wish to add other launcher I did the job with Nova Launcher and Torque pro widget on home. @Malaysk if you wish I send you the settings file of backup and Torque Pro preinstalled.
Inviato dal mio SM-G935F utilizzando Tapatalk
macandnews said:
Good work !
On the other hand, I do not like the home screen, I prefer Erisin's.
Click to expand...
Click to collapse
Soon there will be many launchers - at your choice and taste))) I repeat, this is just the beginning, and version 1.0
trap63 said:
If anyone wish to add other launcher I did the job with Nova Launcher and Torque pro widget on home. @Malaysk if you wish I send you the settings file of backup and Torque Pro preinstalled.
Inviato dal mio SM-G935F utilizzando Tapatalk
Click to expand...
Click to collapse
In the OEM application there is Torque
Malaysk said:
Soon there will be many launchers - at your choice and taste))) I repeat, this is just the beginning, and version 1.0
Click to expand...
Click to collapse
Malaysk said:
In the OEM application there is Torque
Click to expand...
Click to collapse
here a sample of my Nova Laucher with Torque Widget real time
Awesome work! I enjoyed your firmware on my MTCB unit. I did see some issues with bluetooth where the adapter name, and password would be reset, but since it has resolved itself. Also, could you please add the CarPro Launcher back as the default? It was far easier to use than the one included. Once again, great work!
HERE available alternative download link from my Drive for Malaysk PX5 MTCD:
https://drive.google.com/open?id=0BxORzE28l_E3OENMTkg4RXFMaVU
for DAB+ here https://drive.google.com/open?id=0BxORzE28l_E3NnJyTy1YdV9mcDA
for Nova Launcher backup with Torque widget and modified theme (please remember to modify Torque in your vehicle profile settings, this is recorded for Subaru BRZ on Xtrons PB76HGTAP - PX5) https://drive.google.com/open?id=0BxORzE28l_E3X3ZNTlFVNURtbFU
Malaysk said:
Soon there will be many launchers - at your choice and taste))) I repeat, this is just the beginning, and version 1.0
Click to expand...
Click to collapse
Malaysk I only hope that you don't abandon PX3?
trap63 said:
HERE available alternative download link from my Drive for Malaysk PX5 MTCD:
Click to expand...
Click to collapse
And here my catalog mega.nz https://mega.nz/#F!nZEDXLhB!Ow7ZRFP6nWM7fF8ILwZULg with files [ROM][PX5][HD] Malaysk ROMs for any yet known MTCD-Device by Malaysk
@Malaysk Awesome work! Thanks a lot
Related
Stitching device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!Only for devices MTCD 1024X600 and 800X480 PX3 1GB Android 5.1.1
RK3188!!!FOR PX3 2GB Android 7.1.1 - https://forum.xda-developers.com/an...nt/rom-malaysk-roms-mtcd-mtce-device-t3693509Restoring the device from a brick - http://forum.xda-developers.com/showpost.php?p=68717214&postcount=877Instructions for connecting the Xposed modules - http://forum.xda-developers.com/showpost.php?p=69295656&postcount=1388
All of the latest firmware on the server http://huifei.fs-fileserver.de/content/firmware/MTCD%20Custom%20ROMS%20-%20NOT%20FOR%20MTC-/Installing and configuring modules Xposed in pictures
Only for those who have access to recovery (originally trying to get into it and reset key combinations) !!!
++++++++++++++++++++++++++++++++++++++++++++++++++++
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"
++++++++++++++++++++++++++++++++++++++++++++++++++++
Installation: Unzip the archive, burn to the root of the SD card file dupdate.img and insert the card into the SD slot of the device. View recovery and falls on the third item of data cleaning. After installation, go back in and make recovery and Wipe Data (penultimate paragraph)
When you first install will generate an error and go back to the reboot, start flashing again - this is normal (resize partition)
Do not forget to Wipe Data from recovery (penultimate paragraph)
New from May 31, 2016 (1st version)
Base on 05/05/2016
Integrated Root
Firmware FUSE (all memory is internally connected into one - turned out 13.5 GB) - for advice and assistance thank SW. booroondook
Remove debris (Chinese keyboard, Maps, etc.)
Added Program - ES File Explorer , TitaniumBackup
Three launcher to choose from (Settings - Desk)
Other ...
New from June 2, 2016 (2 version)
A new item in Settings - System (here all the new items are added)
- Date and time in the status bar
- Screen Density
- Sidebar with programs
- The rate of incoming and outgoing Internet in the status bar
- Change the font and size of the system
- Lock all advertising from the Internet
Settings for the developer immediately appear in Settings
It changed the appearance of the equalizer
Reworked Radio App
Changed all the status bar
Added reboot and reset button in the status bar in rekaveri
and much more
New from June 6, 2016 (3 version)
Fixed the status bar appearing when changing the system language.
Optimizations and fixes for 800X480 resolution screen (evading problems, I do not have such a device)
graphic change factory settings
New Settings - System - The gradient of the status bar (see the screenshots)
The OEM application is a set of programs, the factory program and new themes of regular applications. Install the application as normal. Removal - go to Settings - Applications - Remove the update.
KingoRoot replaced by SuperSU (hidden Root access)
The shutter notification added Dimmer
Many more ......
New from June 27, 2016 (4 version)
Android base on June 21, 2016 (JY)
New Radio, Music, Video (three different color themes) - The other applications are OEM app.
add Settings - Airplane Mode, Mobile Data, Configure APN
New Settings - System - Autostarts
New Settings - Display - Heads-up notifications
New Settings - Partition info
Changed Status Bar
Updated Google, Google Services, Play Store
Change the permissions for programs that are now available to all applications in the Play Store
Altered applications and ?anbas app for screen resolution 800X480
The OEM application is a set of programs, the factory program and new themes of regular applications. Install the application as normal. Removal - go to Settings - Applications - Remove the update.
Do not forget - you can change the Launcher in the Settings - Home
Many more ...
P.S.: The application OEM is added to the program Mtcservice, where you can change the serial number on the 12 - digit to start the program TomTomGo. It is necessary then to activate the module Mtcservice in Xposed!!!
New from September 16, 2016 (6.5 version)
1. Fixed the choice for a navigation app. Now after selecting a program, it will be immediately started.
2. All additional programs and launchers can now be removed by standard methods in Settings - Applications.
3. In the status bar adds a new icon (the moon) to start Skrinsever. Customize it possible to program ScrinseverClock (the clock itself, color, size, weather display, etc.)
4. Module for Xposed MalayskStatusBar removed.
5. Xposed Run now in the Settings.
7. New: Settings - Sidebar
9. launchers updated to the latest versions.
10. Added the latest jetAudio peredelany me completely. (Can be removed in the Settings - Applications)
11. Removed hidden Root access and have the latest SuperSU (some programs incorrectly worked with hidden as root)
12. Fixed replacing the system font in Settings - System - Select the font.
13. Fixed setup notifications in Settings - Display.
14. Settings Network Card reappeared.
15. Added support Init.d
16. i2cset added a binary file for the sound
17. In the folder system / etc / init.d already in configuration file to change the sound (enabled by default i2cset -y 4 0x1A 0x25 0x01 and i2cset -y 4 0x1A 0x2C 0x60) (permission from him after the change must be 0755)
17. Other.
NEW dated October 16, 2016. Firmware ?7.5
+ Fixed speed work by GPS widget
+ Fixed 3G modems
+ Added support of 7floor direct control of sound (in the OEM application has mtcsound_7floor.apk, will need to install and remove the Root Explorer file 33i2cset program in the system folder \ etc \ init.d)
+ Added the application Radio, Music, Bluetooth, DVD from SW. AlexNikolaev with permission to OEM application.
+ Added launcher KLD.
+ Added Weather Screensaver, Radio, Music. Configure the weather is - Settings - Settings Weather.
+ Other fixes.
NEW October 24, 2016. Firmware 8
Android base of 27 September JY
Fixed XposedVolumeBar module
Added new module for Xposed mtc-music (with the settings do not forget to copy the folder from the archive with the firmware and activate the module in Xposed)
In Copy_TO_SD_External folder (GPS Card) - From KM - are the folders to display the speed in kilometers per hour
In Copy_TO_SD_External folder (GPS Card) - From MPH - are the folders to display the speed in MPH (American format)
Added different skrinsevery in OEM application (analog and digital)
Setting display Weather in skrinsever - Settings - Settings Weather.
Many other additions and fixes.
NEW of 18 December 2016. Firmware 9
1. Android base on November 22, 2016
2. Fixed Google Play
3. Now all folders with configuration files .ini (mtc-launcher, mtc-music, mtc-statusbar) need to copy the program ES File Explorer (there are in the firmware) in the internal memory internal_sd !!!
It made specifically for devices that do not have SD Card (GPS Card)
5. Added fully working module for Xposed - mtc-keys (to change the button assignments on the unit)
Setting .ini file with a folder mtc-keys it must be located on the outside of the SD card external_sd !!!
The archive with the firmware is an example configuration file, where you double-click the double-click the Back button will start PCRadio (you need it in the section [click.2] to delete the # sign).
Read more about the settings here - http://4pda.ru/forum/index.php?showtopic=704299&st=0#entry39969383
6. Added new version of Radio, Music, Video.
7. added to OEM application launchers and the app (many versions) and Fixed Music application.
8. Added MtcdTools application to configure the keys on the device.
9. change the factory settings for normal display in 1024x600 resolution.
10. Fixed clock in a sliding curtain.
11. The latest version of ROOT access.
12. A great number of other fixes and additions.
NEW of January 15-18, 2017. Firmware №9.6 and №9.7
+ Android base from December 22, 2016
+ Added new staff in OEM applications app in red tones and skrinsever without display GPS speed
+ Many other fixes and additions
Download version 9.6 : https://yadi.sk/d/qjyZdCLA39Astm
+ Changed the sound (except radio) (added on bass and treble) If the sound does not like it, then delete the file \system\etc\int.d\33i2cset
+ Fixed new applications for permission screen 800X480
+ Reworked MTCBlueTooth application - contacts in two lines and color theme of two types - red (found in OEM application), and blue (default)
Download version 9.7 with the modified sound (added on bass and treble): https://yadi.sk/d/0jZmPIbi39bJUX
NEW 29 January 2017. Firmware №10
Fixed bug WiFi Direct
Altered regular application - 3 color themes to choose from (blue dotted, red, green) default blue, the rest of the install OEM applications.
Reworked all the screen savers to display tags and pictures. Weather is also moved upward.
Added display of prognosis in Radio application. Configure or disable can Settings - Weather Settings - Weather on the screen. .. You can change the color, the icons, the size, etc. Reliable Display automatically by GPS and the Internet (it is necessary to include the settings -GPS -Location - On for all sources, or ask the city in the manual mode. Selecting display Prognosis for two providers.
Added module to Xposed, to display tags in screensaver - xposed-mtc-poweramp
Added module to Xposed, to display information from PCRadio in screensaver - xposed-mtc-pcradio
Added module to Xposed, for Bluetooth applications - xposed-mtc-bt-1.5 - read about it here
Shortcut settings are mtc-bt/mtc-bt.ini file where you do need to register telephone numbers.
IMPORTANT: If you synchronize your phonebook with your phone - Always unplug mtc-bt Xposed module and reboot. After synchronization, turn it on again! Otherwise, synchronization will not be!
Added module for Xposed - xposed-mtc-manager - read about it here
The archive with the firmware are examples of the settings in the mtc-manager folder. So if you copy to a GPS map mtc-manager folder with the file settings.ini the default screensaver will be launched in all applications (not just full-time) in 300 seconds, here are the settings:
Code:
# Including alternative screensaver, when you specify false will work full-time mechanism:
screenClock = true
# Time the screen is turned off, if not specified will use the value of the full-time settings in seconds:
screenTimeout = 300
If you want to turn it off completely, then prescribes: screenClock = false
If you want that it does not run in certain applications, it prescribes the package names in the settings file ss_exceptions.ini
Code:
com.microntek.avin
com.microntek.media
com.android.browser
Added module for Xposed - xposed-mtc-music-2.8 - read about it here
For turning off the screensaver by clicking on the moon in the status bar so we prescribe in the mtc-music file/mtc-music.ini
Code:
# Turn off the screensaver only when you touch the screen. true - yes, false - normal mode of operation.
touch_mode = true
So many the other - much to write.
Download version 10 with the modified sound (added on bass and treble): https://yadi.sk/d/3-ajQr753BWxav
VIDEO: https://www.youtube.com/watch?v=DvgrdKBfi2U
NEW 21 Febuary 2017. Firmware №10.8
+ Android base on February 9, 2017
+ Updated Google Services
+ Added three new themes of regular applications, red, green, blue - with quick access panel
(Default is blue theme - the other is in the OEM application)
+ Removed Xposed module - Status bar (if you install the firmware update (without Wipe date)
it then go to Settings - Applications and there remove the status bar module)
+ Added new settings. Now you can fully customize the icons in the status bar.
They are located in Settings - Display.
+ Added a new screensaver with quick access panel (can be directly run regular applications)
+ ViperFX
+ Many other additions and bug fixes
Do not forget to set in Settings - GPS - Location - According to all sources !!!
If you do not like the sound of the system - Remove Root Explorer-om file in the system\etc\init.d\33i2cset
Download version 10.8 with the modified sound (added on bass and treble): https://yadi.sk/d/IUXt0orh3ELHtS
NEW 10 april, 2017. Firmware №11
Be sure to install this firmware with erasure of data (or make Wipe Data in Recovery after installing the firmware)
Optimization of the whole system (brakes almost did not become)
Added a new Xposed module mtc-radio, to display the names of radio stations. The setup file is located in the folder mtc-radio/mtc-radio.ini which needs to be copied to the internal memory internal_sd (is in the archive together with the firmware)
It is necessary to prescribe the frequencies of your radio stations in the mtc-radio.ini file in your city (information can be found on the Internet)
And be sure to turn off the display of RDS in Settings - Factory Settings - Other !!!
Example of the settings in the file mtc-radio.ini
# Required for the module to be disabled in Settings - Factory Settings - Other - Show RDS !!!
[controls]
# radio stations show names in the header RDS
title=true
# show short names on the radio stations buttons
# Show pop-up notifications when the app is not active Radio. default false
toast=true
# Font size pop-up notifications
toast.size=22
[title]
# Names of the stations to display information in the RDS field
91.00=Radio 7
91.50=TOK FM
92.10=Radio May
95.70=Xumor FM
96.30=Ket
98.60=Radio Retro
99.10=Ola-la
99.90=Europa Plus
100.30=Russian Radio
101.00=Chanson
101.50=Рекорд
102.10=Радио Дача
102.50=Радио Energy
102.70=Радио Ваня
102.90=Радио DFM
103.60=Мегаполис
104.30=Самара Максимум
104.80=Autoradio
105.40=Romantika
106.10=Дорожное Радио
106.60=Love Радио
107.20=Child Radio
[buttons]
# Short names for display stations in buttons
91.00=Радио 7
91.50=ТОК FM
92.10=Радио Маяк
95.70=Юмор FM
96.30=КОТ
98.60=Ретро
99.10=Эхо Москвы
99.90=Европа Плюс
100.30=Русское Радио
101.00=Шансон
101.50=Рекорд
102.10=Дача
102.50=Energy
102.70=Радио Ваня
102.90=DFM
103.60=Мегаполис
104.30=Самара Максимум
104.80=Autoradio
105.40=Romantika
106.10=Дорожное Радио
106.60=Love Радио
107.20=Child Radio
[memory]
# radio stations recovery after pressing the RESET button
# FM1
P1.1=106.60
P1.2=101.50
P1.3=102.50
P1.4=102.90
P1.5=99.90
P1.6=96.30
P2.1=100.30
P2.2=104.80
P2.3=106.10
P2.4=105.40
P2.5=104.30
P2.6=102.10
P3.1=102.10
P3.2=104.80
P3.3=106.10
P3.4=105.40
P3.5=104.30
P3.6=102.10
Added 2 and 3 minutes to Settings - Screen - Screen saver time
Do not forget: If after installing the firmware you do not see anything in the StatusBar - go to Settings - Display - Bar Status Settings and turn on the icons there.
Many other additions, updates, fixes.
Download version 11 with the modified sound (added on bass and treble): https://yadi.sk/d/8vwE8PLJ3GoA2M
New from 13 april, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware №11.1
Google services are replaced with MicroG (recommended - install this firmware with erasure of data
(Or make Wipe Data in recovery after installing the firmware)
1. go into the microG Settings application and activate the background services:
- Registering your device with Google
- Google Cloud Messaging
2. In the same place, select the UnifiedNlp settings and note (if you only use GPS, you can skip it):
- location programs (just select one that is more like it), so that the search for networks
- address search programs - mark Nominatim with a daw (conversion of coordinates to address)
3. reboot the device
4. Go to the Play Market and enter your account.
We use.
Download version 11.1 with MicroG : https://yadi.sk/d/LgE6zhfR3GvHgf
New from 18 april, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware №11.4
Added four versions of Launcher:
1. Launcher with GPS speed and Weather (main)
2. Launcher with GPS speed and WITHOUT showing weather (change launcher in Settings - Desktop)
3. Launcher without GPS speed and with analog clock (change launcher in Settings - Desktop)
4. Launcher without GPS speed and with a digital clock (change launcher in Settings - Desktop)
Added a set of full-time programs without showing the top panel and without the weather. (Located in the OEM application)
The gps-launcher module was redesigned to display the speed in the two launchers.
Other fixes and additions.
Download version 11.4 with MicroG : https://yadi.sk/d/rRVYL92R3H6wdJ
If you like my firmware, and you think that I am not wasted a lot of time to create the firmware and you want me to continue to work on firmware, you can thank me or Donate To Me
IMPORTANT: If you synchronize your phonebook with your phone - Always unplug mtc-bt Xposed module and reboot. After synchronization, turn it on again! Otherwise, synchronization will not be!
New from April 25, 2017 for the RK3188 800X480 and 1024X600 MTCD Firmware №11.5
1. Fixed Launcher with GPS speed and WITHOUT showing Weather in the screen resolution 800X480
2. Now all programs are available on Google Play without exceptions (including TomTom)
3. Fixed widget for Radio application in Launchers with analog clock and digital clock
4. TomTom navigation immediately works and downloads maps.
5. Reduced the height of the Bar Status.
6. At the first boot after flashing, there are now icons in the status bar.
Two versions of the firmware with MicroG services and the official version of Google Service.
Download the version with the official Google Market: https://yadi.sk/d/HYOsUi1F3HJ9Y5
Download version from MicroG: https://yadi.sk/d/LXl9hJoy3HKZmJ
New from September 07, 2017 for the RK3188 800X480 and 1024X600 MTCD Firmware №12.6
1. Android base from August 9, 2017 (factory firmware HA)
2. Updated all Google Services
3. The latest version of SuperSU (hidden Root access)
4. New PCRadio with a new module for Xposed from the uv. MVG-V70 (now when running regular programs, the sound of PCRadio is turned off)
5. New screensaver 2 in 1. With analog and digital clock. Change screen - press it for 2-3 seconds.
6. In the startup settings of the screensaver, the autorun time is added Never-15-30-60 seconds-2-3-5-7-10 minutes
7. New Radio with a quick access panel (installed) and without a panel (enclosed in the OEM application)
8. The ViperFX start button and track numbers with the quick access panel (installed) and without the panel (located in the OEM application) are added to the Music application.
To make ViperFX work correctly when the Music application is running, disable the graphic equalizer there.
9. Added a new module for Xposed mtc-bt version 2.3 (on the previous firmware was version 1.5)
If after synchronization of contacts with the phone you have nothing appeared, just exit the Bluetooth application (for example, with the Back key) and go back to it, all contacts will appear. Now you do not need to disable the module in Xposed.
And do not forget to edit the file mtc-bt.ini (lies in the archive along with the firmware) and register the phones for quick access there.
10. Added a new module for Xposed xposed-mtc-manager version 2.5 (on the previous firmware was version 1.13)
Read about his settings here
Copy the folder mtc-manager to an external memory card (GPS card) external_sd - everything is in the archive with the firmware, just edit the setup files for yourself in the program Notepad ++
Now you can connect any OBD adapters with different names, prescribe them in the settings.ini file.
We do not forget who does not need the launch of the screensaver, then we disable not only the Android settings but also the settings.ini file in the mtc-manager folder - screenClock = false
Code:
# inclusion of an alternative screensaver, if you specify false, the standard mechanism will work:
screenClock=false
# the time to turn off the screen, if not set, the value from the default settings will be used:
screenTimeout=260
# name of the program of the screensaver
screenPackage=com.microntek.screenclock
# activation screen saver name
screenClass=MainActivity
The sound is restored (high and low frequencies are raised). If you do not like the sound in the system - Delete the Root Explorer file in the system\ etc\init.d\33i2cset
The work of init.d is restored
Other additions and fixes.
The firmware must be installed with the removal of all data (Wipe Data) !!!!
Do not forget to copy the folders gps-launcher, mtc-launcher, mtc-music, mtc-radio to the root internal memory internal_sd, and folder mtc-manager to the root of the external card external_sd and activate the modules in Xposed.
Version with the official Google Market:
Download the version with the official Google Market: https://yadi.sk/d/bBIUME4_3Mft2r
Version with MicroG:
Download version from MicroG: https://yadi.sk/d/ZZJ2vX0e3MftdK
New from July 09, 2018 for the RK3188 800X480 and 1024X600 MTCD Firmware № 13
1. New versions of Music - are in the OEM application.
2. In Settings, the item Lock screen is added.
3. New screensavers with a graphic equalizer (located in the OEM application)
4. New PCRadio - in a transparent style from the uv. DUK.
5. New screensaver 2 in 1. With analog and digital clock. Change the screen - click on it for 2-3 seconds. (installed by default)
6. New Radio with a quick access panel (installed) and without a panel (enclosed in the OEM application)
7. The Music button is added to the Music application with the option of selecting a graphic equalizer with a quick access panel (installed) and without a panel (in the OEM application)
8. Correct reboot (including MCU) of the device from the StatusBar (many thanks sva4pda for the help)
9. The volume of the bell is reduced.
10. In the application OEM added Live Wallpaper - Planets (you can try to install them, cool will look in the transparent versions of the Screensaver, Music and Radio )
11. Other additions and corrections.
The firmware must be installed with the removal of all data (Wipe Data) !!!!
Do not forget to copy the folders mtc-launcher, mtc-music, mtc-radio to the root internal memory internal_sd, leave other folders on external SD (external_sd) and activate modules in Xposed.
Version with the official Google Market:
Download the version with the official Google Market: https://yadi.sk/d/S-HQ3I9N3YxRgj
Version with MicroG:
Download version from MicroG: https://yadi.sk/d/uJPHkAKB3YxRkG
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"
-------------------------------------------------------------------------
Examples of writing in Settings - Date & Time - Custom JAVA format for display in the status bar.
examples:
dd.MM.yyyy - 17.04.2016
dd / MM / yyyy - 17/04/2016
dd MMMM yyyy - April 17, 2016
dd MMMM - April 17
EEEE, dd MMMM - Tuesday, April 17
HH: mm: ss - 20:33:30
K: mm a - 4:45 PM
date
D (day of the year) - 199
E / EE / EEE (day of the week) - W
EEEE (day of the week) - Tuesday
EEEEE (day of the week) - In
F (day of the week in the month) - 2 (2nd week of July)
FF (day of the week in the month) - 02 (2nd week of July)
G (era) - NE
L (Autonomous month) - 1
LL (Autonomous month) - 01
LLL (Autonomous month) - January
LLLL (Autonomous month) - January
LLLLL (Autonomous month) - I
M (months in a year) - 1
MM (months in a year) - 01
MMM (months in a year) - January
MMMM (months in a year) - January
MMMMM (months in a year) - I
W (weeks to months) - 2
WW (weeks to months) - 02
c / cc / ccc (Autonomous day of the week) - W
cccc (Autonomous day of the week) - Tuesday
ccccc (Autonomous day of the week) - In
d (days per month) - 1
dd (in the month) - 01
w (weeks in a year) - 9
ww (weeks of the year) - 09
yy (year) - 16
y / yyy / yyyy (year) - 2016
Time
H (hours a day: 24) - 3
HH (hours a day: 24) - 03
K (hours am / pm: 12) - 1
K (hours am / pm: 12) - 01
S (milliseconds) - 700
h (hours am / pm: 12) - 3
hh (am / pm hours: 12) - 03
k (hours per day: 24) - 7
kk (hours per day: 24) - 07
m (minutes per hour) - 5
mm (minutes per hour) - 05
s (seconds to minutes) - 5
ss (seconds in a minute) - 05
a (am / pm marker) - PM
z / zz / zzz (time zone) - STV
zzzz (time zone) - Pacific Standard Time
Z / ZZ / ZZZ (time zone RFC 822) - 0800
ZZZZ (time zone RFC 822) GMT-08: 00
ZZZZZ (time zone RFC 822) - 8:00
'(The escape character to the text) -'Date ='
'' (Quote) - 'o''clock'
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
reserved
reserved
Looking forward to it!
Yes!! This needs your magic touch Malaysk. I thought with new hardware and OS that this would be better. It is slow and non responsive compared to my MTCB unit.
Where can I donate?
Just received my Xtrons HU yesterday. Software quality is really horrible. Probably the worst Android device I ever had. Really looking forward to a custom ROM and hopefully it supports my GS version.
@Malaysk: were can I donate to support your effort? Couldn't find your donate button so far. :angel:
da_anton said:
Just received my Xtrons HU yesterday. Software quality is really horrible. Probably the worst Android device I ever had. Really looking forward to a custom ROM and hopefully it supports my GS version.
@Malaysk: were can I donate to support your effort? Couldn't find your donate button so far. :angel:
Click to expand...
Click to collapse
Click on his username in any post, and you will see a "$ Donate to me" option in the dropdown menu that pops up.
Donation is on its way...
sterod said:
Click on his username in any post, and you will see a "$ Donate to me" option in the dropdown menu that pops up.
Click to expand...
Click to collapse
Thanks! Just donated and looking forward to Malaysk's magic.
Perhaps this thread should be locked as to prevent the huge number of non-relevant replies you just know are coming? That way, we can actually subscribe to the thread to know when new releases are out.
In a few days I will receive the unit and I will try this ROM. Thank you @Malaysk
@Malaysk - Can you tell me if your ROM fixes the "bluetooth off" bug? If you can take a look at this thread, it explains that the May 4th ROM fixed the issue (which yours is based on, I think) but that by applying root to it with Kinga Root, it breaks the Bluetooth again and the problem returns.
http://forum.xda-developers.com/and...uestions-development/bluetooth-buggy-t3389500
I am very happy to have donated to this cause! I had no idea you would push a ROM out so fast!
sterod said:
@Malaysk - Can you tell me if your ROM fixes the "bluetooth off" bug? If you can take a look at this thread, it explains that the May 4th ROM fixed the issue (which yours is based on, I think) but that by applying root to it with Kinga Root, it breaks the Bluetooth again and the problem returns.
http://forum.xda-developers.com/and...uestions-development/bluetooth-buggy-t3389500
I am very happy to have donated to this cause! I had no idea you would push a ROM out so fast!
Click to expand...
Click to collapse
I removed the program KingoRoot and made his to rott access , I would think, I have only one unit per day )))
I'm installing it right now and will post my findings.
---------- Post added at 08:47 AM ---------- Previous post was at 08:03 AM ----------
The installation went smoothly but unfortunately the "Bluetooth Off" bug is still there.
^thats a shame. this is the fix i'm waiting for the most.
Same here. I don't know if what the other user posted is true, that the May 4th ROM fixes it and that rooting that ROM breaks it again. I tried running SuperSU me to replace Kingo with SuperSU but the problem remains.
sterod said:
I'm installing it right now and will post my findings.
---------- Post added at 08:47 AM ---------- Previous post was at 08:03 AM ----------
The installation went smoothly but unfortunately the "Bluetooth Off" bug is still there.
Click to expand...
Click to collapse
I'll be watching this issue.
Tell me in detail where the problem? I took my phone and I have all united and all the phone book copied and running?
Thanks! Maybe we could start a request section for your rom? The other feature I would like is a patch to prevent the head unit from momentarily shutting down when the accessory power is switched.
@Malaysk
I can install this fw on any mtcd device?
And wheel steering works well? In my fw dont see keys. Have device for BMW.
Malaysk said:
I'll be watching this issue.
Tell me in detail where the problem? I took my phone and I have all united and all the phone book copied and running?
Click to expand...
Click to collapse
Hi Malaysk, if you take a look at my post on the Joying Forum (linked below) I explained the problem in good detail.
http://forum.carjoying.com/thread-52-10-lollipop-bluetooth-problems.html
I really appreciate you taking a look at this, its truly the only thing I want fixed and why I donated so much.
Only for PX3 MTCD-MTCE Android 7.1.2 !!!Only for those who know how to get into the recovery (different combinations of keys)How to find out if this firmware is suitable for your device - go to Settings - About the device -we look at the screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Version 1.0 of October 23, 2017.
Built-in Root latest SuperSU (hidden root access).
Built-in Xposed
Added support for Init.d
Signature verification is disabled.
Added Launcher I modified (see screenshots)
Added programs - Root Explorer, ES File Explorer.
New item in Settings - Custom settings (here all new added items are located)
Added reboot and reboot button in the recovery in StatusBar
Speed of outgoing and incoming Internet in the status bar
The standard sound control is redone
Redesigned graphic design of pop-up messages.
Added module for Xposed - Disable Fullscreen Keyboard - http: //repo.xposed.inf...ablefullscreenkeyboard
You can completely customize the icons in StatusBar. Are in Settings - User settings - Hide - Show icons in the Status Bar and there turn on or off, then what you need.
Screensaver with the function of speed by GPS and Weather.
Module Xposed to display the speed of the GPS in the screensaver - gps-mtc-launcher.
In the archive, along with the firmware, there is a folder called mtc-launcher, it must be copied to the root of the internal memory card (SDCARD) using ES File Explorer. And you must activate the GPS Mtc Launcher module in Xposed !!!!
In the folder Copy_To_internal_sd (SDCARD) - From MPH - to display the speed in MPH (US and others)
In the folder Copy_To_internal_sd (SDCARD) - From KM - to display the speed in KM / H (Russia, Europe and others)
The weather settings in the screensaver and Launcher are adjusted in Settings - User settings - Weather on the screen. There you can turn on - turn off the weather display. Do not forget to enable Settings - Location - By all sources (WiFi and GPS)
Added different time values for running the screensaver in Settings - Screen - Time to start the screensaver Never-15-30-60 seconds-2-3-5-7-10 minutes.
A lot of everything.
Install with full data cleaning - Wipe Data (check the box, look at the screenshot) The first download will be very long, about 15 minutes.
View attachment 4311807Download: https://yadi.sk/d/481WJ8kr3P2Gau
Version 2.1 of November 21, 2017.
Made on the basis of the android firmware from October 26, 2017
Video setup instructions - https://www.youtube.com/watch?v=hynq280YYRU
Download: https://yadi.sk/d/E2_Kt-pz3PtTuZ
The first download after the firmware will be very long 15-20 minutes and the device can reboot several times!!!
New from February 16, 2018, Firmware № 3.0
Video instruction on setting up the system (though the video was shot on 6.0.1 PX5 system) - https://www.youtube.com/watch?v=YD31zLeNrXc
1. The firmware was made on the basis of the firmware from February 8, 2018.
2. Fixed Radio schedule (in my Modified Radio) for 800X480 screen resolution. (for testing thanks to Glyckmen) and in the screensaver the Music button.
3. Added screen lock function for PIN code. Enable - Disable in Settings - Custom Settings - Lock screen. The screen lock will occur when the device is fully loaded and when it exits from sleep.
Especially the necessary function, if you leave the car in a car service
4. Updated Xposed to the latest version.
5. Updated Root access (SuperSU) to the latest version.
6. The module for Xposed mtc-launcher is deleted, see below why (duplicate function)
7. Added module for Xposed MVG-V70 (thanks to him for helping me adapt the module for my firmware) xposed-mtce-utils. You can see its settings here - https://forum.xda-developers.com/showpost.php?p=74267480&postcount=2
In the archive, along with the firmware, there are two folders
Copy_To_internal_sd (SDCARD) - From MPH - to display the speed of the GPS in the screensaver in MPH - America, etc.
Copy_To_internal_sd (SDCARD) - From KM - to display the GPS speed in the screensaver in KM/H - Russia, Europe, etc.
It is necessary to copy the entire folder mtce-utils to the root of the internal (sdcard) memory and activate the module in Xposed !!!!
Pay attention to the item:
Code:
# packages of white list applications that are not killed when the device goes to sleep.
[mtce.whitelist]
8. Running Viper after sleep, do not forget to turn off the "jumper" in the staff player, with them the Viper does not work. Settings for Music - https://forum.xda-developers.com/showpost.php?p=75596992&postcount=660
9. The sound adjustment panel has been reworked.
10. Added three launchers to the OEM application in the Other Launchers folder
11. Redesigned application bluetooth.
12. Many things can be installed in the OEM application.
13. Much more
I recommend (at your discretion) do Wipe Data.
If you are installing the firmware from Wipe Data, then the first download will be a long 10-15 minutes!
Download Firmware 3.0: https://yadi.sk/d/KBYwFAnZ3SU7Tc
New from February 20, 2018, Firmware № 3.1
Video instruction on setting up the system (though the video was shot on 6.0.1 PX5 system) - https://www.youtube.com/watch?v=YD31zLeNrXc
1. Fixed the lock screen (number "0") and a little altered.
2. Added to Settings - Custom Settings - For Developers
3. Added to Settings - User Preferences - Clock settings in the status bar. And the clock and date are made in the middle.
To make the clock visible you need to go to the section Select the color of the clock and date and set its color.
4. Redesigned Screensaver. Also new and old versions are in the OEM application in the folder ModApk - ScreenClock
5. Also in the OEM application is added to Live wallpeper folder with 4 full versions of Live wallpaper. When you install them, then select them on the Desktop
you can in Settings - Screen - Wallpapers - Live Wallpaper.
6. The version of Music in a transparent style is added to the OEM application. Located in ModApk folder - Malaysk Mod - MtcMusic4_Transparent (2 versions - with and without panel)
7. Fixed launching PCRadio.
If you are installing the firmware from Wipe Data, then the first download will be a long 10-15 minutes!
Download Firmware 3.1: https://yadi.sk/d/m-9qQV6t3ScVDL
New from 05 June 2018, Firmware No. 4.0
+ The firmware is made on the basis of the factory firmware from 04/26/2018.
+ The new PCRadio mod from Duk (transparent, with a power button)
+ Updated the module for Xposed from MVG-V70 (4pda) xposed-mtce-utils (thanks to the eum for adapting it for soya firmware)
+ Added a module for Xposed from graser (4pda) dasaita-xposed (thanks to him for the module)
+ Multiple fixes and additions to the firmware
+ Redesigned bluetooth application with the panel and without it (found in the OEM application)
+ Added a new version of the screensaver with the choice of a graphic equalizer (Right bottom button)
Change screen from analog clock to digital - click on the screensaver for 3-4 seconds.
+ Added to Music application button for selecting graphic equalizer - VIS button
+ New version of ViperFX
+ New version of EasyConnected (located in the OEM application in the app folder)
+ another ....
All mod. applications are in the OEM application
If you lose the clock in the status bar, then you need to go to Settings - User Settings - Clock settings in the status bar and there to specify any color of the clock.
Do not forget to copy the folder mtce-utils (is in the archive together with the firmware) after installing the firmware on the internal memory card (sdcard) and activate all modules in Xposed.
I strongly recommend installing the firmware with full data cleaning (Wipe Data), because Many files have been moved and may not work properly after a regular update.
The correct operation of the built-in modules for Xposed is possible only on my mod applications Radio, Music, Bluetooth, Screensaver. All of them are in the OEM application in the ModApk/ 1 Malaysk MOD folder and in the ScreenClock Malaysk folder.
Download Firmware 4.0: https://yadi.sk/d/o5xGdE6p3X9vqT
New from 11 June 2018, Firmware No. 4.1
Who installed the firmware No.4.0, then you can install it with a simple update, without deleting the data (but if you updated it to the manual module xposed-mtce-utils, before you install the update, go to Settings - Programs - xposed-mtce-utils, click on three vertical dots in right upper corner and delete the Update module), for all others I recommend installing with full data cleaning (Wipe Data).
+ Two screensavers MTCScreenClock_No_Transparent and MTCScreenClock_Transparent (found in the OEM application) are redone - a graphic equalizer is added (choice is the upper right button) and a temperature display is added from the canbas (I need to check, I do not have such in the device)
+ Corrected sound controller
+ New converted widgets.
+ Other
Download Firmware 4.1: https://yadi.sk/d/RPvx0Dv43Xm2e3
New from 11 December 2018, Firmware No. 5.0
I strongly recommend installing the firmware in a clean, with the removal of all data (Wipe Data)!
The first download after the firmware will be very long 10-15 minutes, then the device will reboot - this is normal!
Android base - factory firmware from November 11, 2018.
Added support for online updates.
Practically different from previous firmware by 80 percent.
Do not forget to copy the mtce-utils folder to the root of the internal memory and activate all the modules Xposed!
Firmware setting video - https://www.youtube.com/watch?v=3XJ6x5PbtlM
Download Firmware 5.0: https://yadi.sk/d/XYpCdgjydCp8Cw
Mirror Firmware 5.0: https://mega.nz/#!wgRXjQzJ!8gLrfjHb_5mNGrW5I8yOXoJcWTvuIP8nlNU3S27Vn9w
Big request to support the project! I need to pay for a server for online updates! Who is not indifferent and likes my firmware and so that the project can be developed HERE
Released online firmware update 5.2.
1. Fixed the operation of the Navigation and MODE buttons.
2. YahooWeather provider removed (Since January 3, 2019, access to this weather provider has been terminated) Only OpenWeather has been left.
3. You can customize the Launcher New Style in Settings - Custom Settings - Launcher Settings.
4. Added Greek, Romanian, Turkish languages to User settings.
5. Added Russian language in the factory settings.
6. Now fully customizable screensaver. You can set any image on the background, make a gradient.
Remove add elements in the screensaver. Make any color and transparency of the text in the screensaver. Settings are in Settings - Custom Settings - Screensaver Settings.
So far it works only in one screensaver, which is located in the OEM application, in the ScreenClock Malay folder - MTCScreenClock_2_Digital_Clock_STYLE_KMH and MTCScreenClock_2_Digital_Clock_STYLE_MPH.
In the next firmware upgrade, this will work on all screensavers.
7. Other updates and additions.
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"
Module settings xposed-mtce-utils for XposedHow to find out the name of the package, the program you want to add in the settings.ini from the xposed-mtce-utils module for Xposed to add to the white list after sleep or to not start the screensaver when the program is started?
It's very simple, download the program QuickShortcutMaker - View attachment QuickShortcutMaker.apk , run it and look at the names of the packages and enter them in settings.ini in the place you need.
Author: MVG-V70
Capabilities:
- White list of applications that do not turn off when the recorder goes to sleep;
- correction of messages mute on / off for old firmware;
- a strip of volume control at the bottom of the screen;
- Hiding icons in the status bar;
- adjustment of the application carousel (switched by the mode button);
- display the name of the radio station in the field for RDS information;
- pop-up messages when switching radio station switching;
- setting the staff player to pause for an incoming / outgoing call;
- pop-up messages when switching tracks in a regular player;
- reassignment of buttons on the front panel of a radio tape recorder;
- change the name of the OBD device;
- display the name of the radio station on the modified widget;
- showing the name of the radio station and the tags of the music tracks in the modified screensaver;
- display teeperators (from canbus) in the modified screensaver;
- Sorting the phone book by Cyrillic characters;
- Speed dialing for a long press of a numeric button.
All settings are in the file in internal memory /sdcard/mtce-utils/settings.ini
Example settings.ini
# hide the volume, brightness and disk eject button false-hide, true-do nothing
[systemui.icons.status]
volume=false
eject=false
screenbrightness=false
# packages of white list applications that are not killed when the device goes to sleep.
[mtce.whitelist]
info.mapcam.droid
org.adaway
com.audlabs.viperfx
com.maxmpz.audioplayer
com.kunkunnapps.os8.keypad
# basic settings
[mtce.settings]
# If the radio is not in the talk mode, you can use the end key as "back"
hangup_as_back=true
# The level of safe volume installed before turning off and back on the radio
volume.safe=10
# Alternative mode for switching packets using the mode button
mode=true
# Alternative screensaver mode: true-enable, false-turn off
screenclock=true
# the names of OBD devices, separated by commas
# If there is no line with the device name, a function is called from the firmware
obd_device=OBD,SPP-DUAL
# GPS time synchronization at power on
sync_gps_time=true
# packages that are switched to the carousel (button MODE)
# in the example of Radio, Music and Video
[mtce.mode]
com.microntek.radio
com.microntek.music
com.microntek.media
# increase the volume depending on the speed
[mtce.speed.volume]
# true-enable, false-off
enable=false
# speed thresholds at which the volume will be increased
speed.volume=40,80,100,120,150
# Increment speed increase, default 1
volume.delta=1
# list of application-exceptions, in which the screensaver will not start:
# in the example of Yandex-maps and navigator and the regular player
[screenclock.exceptions]
com.microntek.media
ru.yandex.yandexmaps
ru.yandex.yandexnavi
com.navitel
# Radio settings
[radio.settings]
# show pop-up messages: true-enable, false-disable, default false
toast=true
# font size of pop-up messages, 24-increased
toastSize=24
# show the name of the radio station in the field for RDS information when RDS is off
# the name of the radio station is taken from the corresponding button.
names=true
# sending information for the modified staff widget
widget=true
# settings of the standard modified widget
[widget.settings]
# show information with the name of the radio station
radio=true
# name of the field with the name of the radio station
radio.name=txt_StationName
# settings of the staff player
[music.settings]
# Alternative cover if the standard does not work. Default is false
cover.alt=true
# pause after a call. false by default
play_after_call=true
# show popup messages when changing a track, default is false
toast=true
# font size of pop-up messages, 24-increased
toast.size=24
# format of the pop-up message, you can use %title%, %album%, %artist%, %filename%
toast.format=%artist% - %title% - %album%
# Bluetooth settings
[bluetooth.settings]
# sorting in the beginning by Cyrillic characters, default is true
sort=true
[bluetooth.quickdial]
# number per button (3) (Long press button 3 in the Bluetooth application)
3=+11111234567
[android.microntek.service#keys]
; dvd -> yandexmaps
app_296=ru.yandex.yandexmaps
[com.microntek.music#keys]
; mute -> pause
event_258=257
Click to expand...
Click to collapse
Awsome!
I have a px3 with Android 7.1.2, but only 1gb ram.
Can i flash this rom?
michiil said:
Awsome!
I have a px3 with Android 7.1.2, but only 1gb ram.
Can i flash this rom?
Click to expand...
Click to collapse
Take photos of the whole section Settings - About the device
Have you updated the firmware for Android 7.1.2 and what is yours MCU?
Malaysk said:
Take photos of the whole section Settings - About the device
Have you updated the firmware for Android 7.1.2 and what is yours MCU?
Click to expand...
Click to collapse
Hope you can read it..
I did not update the unit, it came with 7.1.2 preinstalled.
Mcu is: MTCD_XRC_V2.58_1
ohh nice, this is what i'm waiting for. THX malaysk
I just saw this over on the RU forum, super excited to dig in, thanks so much for all your work!
michiil said:
Hope you can read it..
I did not update the unit, it came with 7.1.2 preinstalled.
Mcu is: MTCD_XRC_V2.58_1
Click to expand...
Click to collapse
I think that this firmware is right for you, it's really strange why you have 1 GB of memory
I'm running an Eonon px3 model (GA8163.) I'll try to get this installed tomorow.
I'm hoping that it:
Runs slightly faster.
Audio stops muting for 1 second randomly.
Stock equalizer properly delivers mid and low range bass. (Looks like the same stock app.... I currently have to load a bass booster app every time to correct it.)
Malaysk said:
I think that this firmware is right for you, it's really strange why you have 1 GB of memory
Click to expand...
Click to collapse
Would it be hard to get back if it doesnt work?
I don't want do have a brick aferwards...
Greetings from Canada
I'm looking very forward to this with my Eonon GA8163 for Mazda 3 2011.
The wifi is pretty slow, system is also getting slower.. although I haven't done much.
I would also like the bluetooth to accept connections from other devices such as a keyboard, game pad or anything else.
Never flashed a Android before. I wonder if it could fix any of those issues.
Hello Malaysk,
first thank you for your work.
I have a few questions:
-Is the "Shutdown when ACC off" function integrated ? (Auto Sleep, 30 Sek., 5 Min., ...)
-Is the "Widget-Problem" fixt ? No function after cold reboot?
-FM-Station-Names can be stored permanently?
-Runs the TASKER-App automatically after cold reboot, when installed?
Thanks in advance
Papa-Shango
Wow!!
Malaysk, getting into recovery is not needed, right? We can just extract rar, place the nupdate.img on a USB or SD card and flash from settings, right? Did you mean that we should know how to get into recovery if something goes wrong?
Cheers,
Rahul U S
Awesome. Thanks for your time/effort Malaysk :highfive:
This looks to be just what I need for my Xtrons PA77AA3P
Now just need to wait for download to become available again...
Nice work bro!
ROM installs OK for me on an Xtrons PA77AA3P unit.
Not had a chance to play really as it is late right now...
A few notes from me as I have not used any android device for the last few years:
I just connected the media and got an autorun prompt and proceeded as per the screenshot
It will take about 30 mins or so to complete the update process, after install/erase the unit will sit on logo screen for ages...
I think DAB+ app is missing but have seen some posts about an improved patched version somewhere on here...
Need to have a proper look/play tomorrow...
s.rahus said:
Malaysk, getting into recovery is not needed, right?
Click to expand...
Click to collapse
I cannot set my device into recovery, too (holding reset for some seconds just resets the unit). Anyways having a recovery option would be fine if anything goes wrong.
I am hoping by Thursday I will be able to test it on my XRC (Hizpo branded) and possibly my GFs WWW (Eonon Branded).
I flashed this on my XRC unit with NO issues. Fantastic! Will play with it more.
@Malaysk, Can you add an option to auto hide the status bar/notification bar? We should be able to unhide the status bar by swiping down from top or using the back buttom.
kabelgleichung said:
I cannot set my device into recovery, too (holding reset for some seconds just resets the unit). Anyways having a recovery option would be fine if anything goes wrong.
Click to expand...
Click to collapse
While the device is on, press and hold on to the power button for about 15-20 seconds or more until it reboots. It may reboot into recovery mode now. Please try and see if this works for you (assuming that you have physical power button)
twist said:
I am hoping by Thursday I will be able to test it on my XRC (Hizpo branded) and possibly my GFs WWW (Eonon Branded).
Click to expand...
Click to collapse
Just flashed without any issues on my XRC unit.
Thanks,
Rahul U S
Hello again,
can someone who installed the rom check this functions, please?
Many Thanks !
Papa-Shango
Papa-Shango said:
Hello Malaysk,
first thank you for your work.
I have a few questions:
-Is the "Shutdown when ACC off" function integrated ? (Auto Sleep, 30 Sek., 5 Min., ...)
-Is the "Widget-Problem" fixt ? No function after cold reboot?
-FM-Station-Names can be stored permanently?
-Runs the TASKER-App automatically after cold reboot, when installed?
Thanks in advance
Papa-Shango
Click to expand...
Click to collapse
Only for devices processor Rockchip PX5, MCU - MTCD, MTCE Android 6.0.1 and 8.0 RAM 2-4 gb !!!Mod 9.0 Android Pie for PX5 - https://forum.xda-developers.com/an...malaysk-rom-px5-2-4-gb-android-6-8-9-t3955343FOR PX30 - https://forum.xda-developers.com/showpost.php?p=79234731&postcount=6
With firmware device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!
Everything you do - you do at your own peril and risk.
Only for those who know how to get into the recovery (different combinations of keys) and installed in the device SD card slot !!!
Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
Restoring killed (brick) on the device after unsuccessful flashing - https://forum.xda-developers.com/showpost.php?p=75664396&postcount=3254
Built-in Root access, latest SuperSU.
Built-in latest version Xposed.If you write at the first start Xposed - it is installed, but not activated - we exit and reboot the device, then everything will be fine. And do not forget to activate all modules in it!
Signature verification app is disabled.
Added programs - Root Explorer, ES File Explorer.
New item in Settings - Display - Custom settings (here all new added items are located)
1. Lock screen (function for PIN code access)
2. Display Weather ( Show the weather in the screensaver and launcher LM )
3. Hide - Show icons in the Status Bar ( here you can turn on - turn off the buttons in the Status Bar - Back, Home, Moon (launch of the screensaver), Volume, Screen brightness icon)
4. Clock settings in the status bar
4.1 date
4.2 date position
4.3 date Format
4.4 Font
4.5 StatusBar clock color
4.6 Font size
To make the clock visible you need to go to the section StatusBar clock color and set its color.
5. Network traffic ( showing the speed of Internet traffic in the status bar )
6. Gradient StatusBar ( You can make a transparent StatusBar there or add any color.)
7. Developer options
8. Adblock ( blocking the display of ads from the Internet in the browser )
9. Managing startup ( only for advanced users!)
Added reboot and reboot button in the recovery in StatusBar
All the most important and additional applications are in the OEM application
1. HCT_app_gold (factory applications from the firmware HA from March 03, 2018
2. Launchers ( Launcher KGL , JY, HCT, HCT New )
3. Live wallpaper ( Bubbles, Firefly Jungle, Marine Aquarium , Planets )
4. Malaysk Mod
4.1 MTCMovie4_no_panel
4.2 MTCMusic4_no_panel
4.3 MTCMusic4_panel
4.4 MTCMusic4_transparent_no_panel
4.5 MTCMusic4_transparent_panel
4.6 MTCRadio4_no_panel
4.7 MTCRadio4_panel
5. Other Launchers
6. ScreenClock Malaysk
6.1 MTCScreenClock_NEW
6.2 MTCScreenClock_OLD
6.3 MTCScreenClock_Visualizator
Versions of the screensaver 2 in 1. With a long press on it, the screen changes from analog clock to digital.
7. app ( DAB+ , Total Commander , Torque )
The standard sound control is redone
Redesigned graphic design of pop-up messages.
Added module for Xposed - Disable Fullscreen Keyboard - http://repo.xposed.info/module/com.shubhangrathore.xposed.disablefullscreenkeyboard
Screensaver with the function of speed by GPS and Weather.
Added three default launchers - Launcher3 (Gold HA), Launcher KGL (will be the first time you run the firmware), Launcher LM ( with the weather )
Change launcher - Settings - Display - Default apps - Home app.
Added different time values for launching the screensaver in Settings - Screen - Time to start the screensaver - Never-15-30-60 seconds-2-3-5-7-10 minutes.
Added internet radio - PCRadio , if you activate the module in Xposed PCRadio, then the information will be displayed in the screensaver.
Added module for Xposed MVG-V70 (thanks to him for helping me adapt the module for my firmware) xposed-mtce-utils. You can see its settings here - https://forum.xda-developers.com/showpost.php?p=72103289&postcount=2
In the archive, along with the firmware, there are two folders
Copy_To_internal_sd (SDCARD) - From MPH - to display the speed of the GPS in the screensaver in MPH - America, etc.
Copy_To_internal_sd (SDCARD) - From KM - to display the speed by GPS in the screensaver in KM / H - Russia, Europe, etc.
It is necessary to copy the entire folder mtce-utils to the root of the internal (sdcard) memory and activate the module in Xposed !!!!
ViperFX is installed in the system.
ViperFx was added to the MTCManager.apk to work after sleep.
Updated all mod applications - Music, Video, Radio. - You need to go into the OEM application and reinstall the applications from the folder - Malaysk MOD
Added to the modified applications button FX - for start ViperFX .
Added multi-window support to these applications.
Other.
Video Configuring firmware version 3.2 android 8.0 MTCE MTCD: https://youtu.be/3XJ6x5PbtlM
Before installing the firmware, try to get into recovery with hardware buttons and move in it on the menu (Briefly press Power button (or the RESET, or button BACK) Apply - long press on Power button (or the RESET, or button BACK). !!!
Installation:
Who has already installed Android 8:
1. Download the apk file from here - https://forum.xda-developers.com/showpost.php?p=78429554&postcount=2517
2. Download the latest version of my firmware, unzip it, copy the update.zip file to a USB flash drive (formatted to FAT32)
3. Install the apk on the device
4. Connect the USB flash to the device (click Cancel on Firmware update window)
5. Run the Istallrecovery application and click Install
6. Automatically get into the Recovery.
7. Select Apply update system
8. In the next screen, select From usb storage.
9.After installing the firmware, we do it in Recovery - Wipe Data
If you have Android 6 installed:
There are instructions in the archive of the firmware version 3.5
Version 3.2 from December 01, 2018
The archive added information on the firmware in English and Russian.
Who is version 1.0 or 1.1 or 2.0 or 3.0- write the update.zip file to the SD card or USB flash drive - go into the recovery and update the firmware. I strongly recommend that after installation immediately in Recovery do Wipe Data (lose all your installed applications) !!
Later I will add all the information to the first page of the forum.
If after installing the firmware after the download, an error appears Xposed install - just go to the Xposed install application and exit from there.
1. The firmware is made on the basis of the factory firmware from October 11, 2018 year.
2. Removed two Chinese keyboards and cleaned the Chinese.
3. There are 3 different launchers installed by me in the firmware. Change Themes in Settings - Display General - Display Extra - Theme.
4. The default time zone is +3 GMT
5. By default, video viewing is enabled in Settings. By default, the mode is turned off when a regular music player starts automatically when a USB flash drive or SD card is connected.
6. In Settings - Display - Time to start the screensaver screensaver start time has been added Never - 15s-30s-60s-2m-3m-5m-7m-10m (By default, the download is set to 7 minutes) The screensaver is launched only in regular applications.
7. Redone regular screensaver. Added GPS speed (by default in kilometers) and buttons for quick access to regular applications. Also show tracks from a regular music player. If someone needs speed in Miles, then the screensaver can be changed in the OEM application in the ScreenClock Malay folder.
8. Added to Settings - Display - Auto screen brightness at sunset and dawn.
9. Redesigned staff application Music with the top panel. An EQ button has been added to the application to launch the equalizer setting and the VIS button to select a graphic equalizer (7 types). When you click on the weather, the screensaver starts.
10. The standard Radio application has been reworked (2 versions - with the top panel and the second version - without the top panel, located in the OEM application in the Malaysk MOD folder. The EQ button has been added to the application to launch the equalizer setting. When you click on the Weather, the Screensaver starts.
11. Redone staff application for Bluetooth. When you call the panel is also translucent.
12. The standard sound of the incoming call is changed and its sound is reduced.
13. Added application for Internet radio - PCRADIO.
14. Weather Settings in Launcher and Screensaver are located in Settings - Display General - Weather overlay
15. Changed regular volume control. Made in AV style and shown below.
16. Reworked regular widgets in the launcher. Made bigger and translucent.
17. In the Status Bar increased hours. And made a translucent status bar in the staff launcher. (will be visible when Live Wallpaper is installed)
18. Added support for OTA updates (via the Internet), for further corrections and additions.
19. If you sync with contacts from your Google account, you can call from the standard Contacts application.
20. Changed the method of calling the brightness panel from the button in the Status Bar.
21. Updated Viber FX.
22. Switching the view in the Screensaver - a long tap in the center of the screensaver (3-5 seconds). The view will change. There are also many other types of me converted in the OEM application.
23. Many other additions and corrections, a very long time to write, because Factory firmware is almost completely changed - you can watch the video - https://www.youtube.com/watch?v=GSD4UobdexU
Do not forget to activate the modules in Xposed Install, copy the folder mtce-utils to the root of the internal memory (Sdcard) and reboot.
Video Configuring firmware version 3.2 android 8.0 MTCE MTCD: https://youtu.be/3XJ6x5PbtlM
Configuring Dark Launcher on firmware version 3.1.1 :https://youtu.be/JL_GGKbvh_s
Download 3.2 December 01, 2018: https://yadi.sk/d/6d0FikHheuRrUA
Mirror https://mega.nz/#!d151kKwC!A25UmqjLUzgPhXsAZw3D2Ew4IZcNHR0zzjuBAOjywcs
Online update 3.1 released.
1. Added support for receiver 800X480 (it is necessary to check, everything was done blindly, I do not have such a device with the screen resolution)
2. New LOGO when you start the device.
3. New settings - Customize the view launcher. Located in Settings Mod - Display General - Launcher settings
4. New settings - View hours and dates in the Status Bar. Located in Settings Mod - Display General - Clock settings in status bar.
5. In the Dark launcher, GPS speed has been added (can be disabled in Settings)
6. Fixed sound panel when turning on the MTCE-Utils module.
7. MtcDialer now visible in programs.
8. Added color setting for weather
9. A huge number of corrections and additions.
The server will be available from 9-00 to 22-00 on MCK.
Download new updated settings 02.12.2018 for MTC-Utils - https://yadi.sk/d/rzA41dZGQ_xk7Q Copy the folder with the replacement in the root of the internal memory (in the ES File Explorer, it is displayed as SDCARD)
Released online update 3.1.2 (133 MB) 25.11.2018
1. In OEM application added new versions of DAB + 180618 and EasyConnected (remove previous versions of DAB and EasyConnected before installation)
In the OEM application are in the app folder.
2. In OEM application, native factory applications from the HCT firmware have been added. Radio, EQ, Widgets, Launcher, Video, Bluetooth, BTMusic. Located in the folder Factory app HCT.
3. Fixed applications for resolution 800X480 ( need to check who has such a device !!!)
4. Fixed the launcher Mal GPS Panel and added the display of tracks from regular Music and RDS Radio. You can configure in the MOD-Display General Settings - Launcher Settings.
5. In the MOD-Display General Settings - Hide - Show icons in Status Bar - added to disable the display of temperature in the Status Bar.
6. Many other fixes and additions.
Released online update 3.2.1 (51 MB) 12/13/2018
1. All screensavers in the OEM application are updated (if you have installed a screensaver from there, then you need to update it again by installing from the OEM application)
2. Added support for Init.d
3. Launcher Launcher NewStyle fixed
4. Added item for Online updates in Settings Mod.
5. By numerous requests added support scripts from b-max - http://4pda.ru/forum/index.php?showtopic=883219&st=9420#entry79441007 (check is necessary, I didn’t really need it )
6. Many other fixes and additions.
Released online firmware update 3.3 from February 1, 2019 (42 mb)
1. YahooWeather provider removed (Since January 3, 2019, access to this weather provider has been terminated) Only OpenWeather has been left.
2. You can customize the Launcher New Style in Settings Mod- Display General - Launcher Settings.
3. Added Greek, Romanian, Turkish languages to settings mod.
4. Now fully customizable screensaver. You can set any image on the background, make a gradient.
Remove add elements in the screensaver. Make any color and transparency of the text in the screensaver. Settings are in Settings Mod- Display General - Screensaver Settings.
So far it works which is located in the OEM application, in the ScreenClock Malay folder. Who installed the screensaver earlier, you need to reinstall from the OEM application. Do not forget - change the clock screen - press in the middle of the screensaver with your finger for a few seconds.
5. Other updates and additions.
Released online firmware update 3.4 from 5th of April, 2019 (36 mb)
Video 3.4 - https://www.youtube.com/watch?v=DmkIisLg4W8
Video ViperFX settings - https://www.youtube.com/watch?v=dp6nSWIJwPg
Added 4 themes of all regular applications, Radio, Music, Video, Bluetooth music in red, green, blue and regular (default) colors. You can change themes in the OEM application in the Malay Mod folder.
Added the ability to set your own picture or car logo in the standard applications Radio, Music, Video, Bluetooth music.
Located in Settings - Display General - Set your background or logo in Radio and Music. It is desirable to download pictures in PNG format with a transparent substrate. For example, in Google search, enter the brand of your car, for example hyundai ix35 png and go to Pictures. The higher the resolution of the picture, the better. All can be viewed at VIDEO .
Added custom camera parking lines. The code is taken HERE (many thanks to the developers), only everything is finalized for 8 android.
Added two new screensavers with analog speed display via GPS in KMH and MPH. Also located in the OEM application in the Screensavers folder. Changing the view is also supported with a finger in the middle of the screen;
Added a new equalizer for DSP radio .
Many other additions and fixes.
The full version of firmware 3.5 dated May 14, 2019.
I strongly recommend that you make Wipe Data (reset to factory settings) AFTER installing the firmware.
After installation - go to Settings Mod (to update all settings)
All updated launchers and applications are in the OEM application. (everything is updated in the system too)
What's new, added, fixed in version 3.5:
-The soundbar disappears faster.
-Fixed in Radio, the radio station search panel (relevant for Russia) (if you had Radio installed from the OEM application, you need to update it from there)
-In Settings Mod - Basic Settings added whitelist of applications for auto launch after sleep. Enter the package name of the application you need, separated by a semicolon ";".
You can find out the name of the package in this section of Settings. For example, for ViperFX, the package name is: com.pittvandewitt.viperfx, for StrelkaGPS: com.ivolk.StrelkaGPS
Many thanks for the help of sva4pda!
All screensavers have been reworked, if you have installed a screensaver from an OEM application, you need to update it again from an OEM application.
Now all tags from music players, Bluetooth music, Radio (also RDS) are shown. When you first start, you will be asked for permission for notifications - allow them! And activate the module for Xposed - screensaver.
Thanks for helping graser !!
Launcher settings, bar and screensaver status are now in the main Mod Settings window.
In Settings Mod - Screensaver Settings - you can set your car logo. Download from the Internet the logo of the car in a PNG image with a transparent cover,
size 300x190 Px. Copy it to the internal SD card and go to Settings - Screensaver settings - set the logo.
All launchers have been reworked, if you have installed a launcher from an OEM application, then you need to update it again from an OEM application. When you first start, you will be asked for permission for notifications - allow them!
Now all tags from music players, Bluetooth music, Radio (also RDS) are shown in launchers.
The screensaver with analog speed is fixed - now the speed display starts automatically. (lies in an oem application)
A lot of other additions and fixes!
Video: https://www.youtube.com/watch?v=TaAcfrb-lAA
Download version 3.5: https://yadi.sk/d/VRSZI-xq6-rW4Q
Mirror: https://mega.nz/#!d0gQCIwR!NHTmVGKRFjFuWgMRVlK-6f2WHS2bgPXlSZjk08LDFzU
Mod 9.0 Android Pie for PX5 - https://forum.xda-developers.com/an...malaysk-rom-px5-2-4-gb-android-6-8-9-t3955343
Released online update version 3.5.1:
Updated all screensavers, if you have installed a screensaver from an OEM application - update it again from there.
Fixed display of the main weather in the screensaver.
Fixed icon launch settings from the screensaver.
Fixed auto brightness on GPS.
GPS MPH Speed removed from the system - is now in the OEM application, along with the MPH screensaver.
Other fixes.
Who wants to translate Settings into their native language - https://forum.xda-developers.com/showpost.php?p=78421073&postcount=2499
Big request to support the project! I need to pay for a server for online updates! Who is not indifferent and likes my firmware and so that the project can be developed HERE
Video V. 3.0: https://www.youtube.com/watch?v=GSD4UobdexU
Video 3.4 - https://www.youtube.com/watch?v=DmkI...ature=youtu.be
Video ViperFX settings - https://www.youtube.com/watch?v=dp6nSWIJwPg
It was the most difficult firmware for me, from all firmware. If you appreciate my work and the time I spent, you can buy me a beer here :highfive:
reserved
reserved
Oh wow :good:
Thank you Malaysk now we can update our 6.XX Android unit to Android 8
update.zip file Do not update from android 8.0 (ha) to Malaysk
Updates to Error
Thank you
sadaghiani said:
update.zip file Do not update from android 8.0 (ha) to Malaysk
Updates to Error
Click to expand...
Click to collapse
You must do from 1 to 5 points in the section
Installation:
Hello Malaysk,
Does this manual also apply to devices that already have 8.0 installed? With 6.0.1 the ROM was always played over the update file on the device.
A few questions concerning preparing sdcard1
1. What size does the card need to be ? (I have a spare 4GB card )
2.Does the process work on Windows 10 (I'm a bit stuck if it doesn't)
Attempting this process on a windows 10 with the above 4GB card I get an 'Open Object of Disk Failed' error.
Grisu002 said:
Hello Malaysk,
Does this manual also apply to devices that already have 8.0 installed? With 6.0.1 the ROM was always played over the update file on the device.
Click to expand...
Click to collapse
You should definitely replace in the firmware for the modified recovery to install my firmware. Therefore, you need to do all 5 items in the section
Installation:
movieifx said:
A few questions concerning preparing sdcard1
1. What size does the card need to be ? (I have a spare 4GB card )
2.Does the process work on Windows 10 (I'm a bit stuck if it doesn't)
Attempting this process on a windows 10 with the above 4GB card I get an 'Open Object of Disk Failed' error.
Click to expand...
Click to collapse
1. Any sd card of 2-32 gigabytes will work.
2. Change to another SD card. Maybe it is corrupted?
Malaysk said:
You should definitely replace in the firmware for the modified recovery to install my firmware. Therefore, you need to do all 5 items in the section
Installation:
1. Any sd card of 2-32 gigabytes will work.
2. Change to another SD card. Maybe it is corrupted?
Click to expand...
Click to collapse
Malaysk, I would like to install your Oreo rom but please tell me why my MX W2 b5626 does not allow me to start the flash of recovery 8 with Kumarai files. Some claim that my slot is fake, it is not enabled to boot from Sd.Però I have to say that I did not create the SD with Windows 7 because I did not have it. I used Windows Vista and 10 and in fact they both gave me an error. What do you think is a change to say SOoppure my unit will never flas the new recovery 8? Another thing: I have never managed to get in recovery from keys because it has no keys, I'm always entered by USB keyboard. You say that I will have problems getting into it after installing the new recovery when the screen turns gray? Answer me please. Thank you
I just tried to install the 8.0 update but the devise will not start the update and just boot to the launcher.
I re boot into recovery and the update path does not show up.
I am still in recovery 6.2.
Do I need to flash recovery 8.0 before hand? The instructions do not say. How to download and install recovery 8.0?
Thanks
maniep said:
I just tried to install the 8.0 update but the devise will not start the update and just boot to the launcher.
I re boot into recovery and the update path does not show up.
I am still in recovery 6.2.
Do I need to flash recovery 8.0 before hand? The instructions do not say. How to download and install recovery 8.0?
Thanks
Click to expand...
Click to collapse
Instruction says you need two SD-cards. One boot SD-card with the recovery 8 and one with Malaysk rom.
Just read
Clandaries said:
Instruction says you need two SD-cards. One boot SD-card with the recovery 8 and one with Malaysk rom.
Just read
Click to expand...
Click to collapse
I made 2 SD Cards.
The 1st one has 3 files on it:
RKSDFW.TAG
SD_BOOT_CONFIG_CONFIG
SDUPDATE
The second Card has this 2 Files:
Copy_to_Innternal_sd_(SDCARD)
Zip file UPDATE
will not self update by inserting the first card.
Advise?
After upgrading the given software via @ Malaysk, I still have the basic OREO, I installed with the cleaning.
No additives as given in post # 1
mirrors:
dropbox:
recovery https://www.dropbox.com/s/43zopglkpsvxzjw/sdupdate_img from 8.0 Android.rar?dl=0
v1.1 https://www.dropbox.com/s/uvujqbyad...PX5_v_1.1_MALAY_22_03_2018_MTCD_MTCE.rar?dl=0
google drive:
recovery https://drive.google.com/file/d/1APMBe0GmBCez_A4bMOfNLVt2yI51EIG6/view?usp=sharing
v1.0 https://drive.google.com/file/d/10iKTBIvklhzWMXOXDxoLG0T5gcwN2Nhp/view?usp=sharing
v1.1 https://drive.google.com/file/d/1vReptyOHBQnUmHUorgtA4qm7YJKWM0YI/view?usp=sharing
v2.0 https://drive.google.com/open?id=1-KasU6Gs2seQC0DAxxkKy5atWER8Jw7b
v3.0 https://drive.google.com/file/d/1NFDgfusCb5A9dKXHdNpFrOJjTnh_BY8D/view?usp=sharing
v3.2 https://drive.google.com/file/d/1BcwBQLe9a18zl8xNdgfMT_CU-q8nF7BX/view?usp=sharing
i do install malay mod
very nice
thank you
but A Note
for install first stage
you must go to recovery mod and reboot then This step is done
Malaysk:
Is the only update to your sdupdate.img the one from kumarai the malaysk splash screen on boot?
Either way I can confirm that this process worked coming from malaysk android 6 v7.2 on a mtc d/e 2gb unit
That's how it looks after me after installation:
Can I upgrade a system that has a DSP?
Only for devices processor Rockchip PX30, MCU - MTCD, MTCE, MTXX (XX- different letter combinations ) Android 9.0 !!!
Mod Pie 9.0 Android PX30 RK3326
For Mod Pie 9.0 Android PX6 MCU STM32 RK3399 is HERE
For PX6 RK3399 mod 9 android is HERE
For PX5 RK3368 mod 9 android is HERE
Only for devices that already have 9 android from the factory !!
With firmware device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!
Everything you do - you do at your own peril and risk.
Only for those who know how to get into the recovery (different combinations of keys) !!!
Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
Do not mix up your device !!! This is for PX30 RK3326 - MCU should start with MTCX (where X may have different letters) !!! Go to Settings-System - About the device and see your model !!!
What is added, changed:
LITE firmware version:
Root access
Added ESFileExplorer, RootExplorer, PlanetsPack live wallpapers.
Two launchers (one with day and night support)
The ability to start screensaver and set the start time of 15-30 seconds 1-3-5-7-10 minutes is included.
By default, video viewing while driving is enabled and sound muting in Navigation is set to -3.
Changed the Music and Radio application (also made translucent)
The ability to set your logo in the Radio and Music application in Settings.
Changed the main Settings.
Reworked soundbar
Reworked watches in the Status Bar with the ability to edit them - set the size, color, date.
The ability to set the viewing speed of Internet traffic in the Status Bar.
Ability to change color and gradient in the Status Bar.
Many other changes and additions.
Video LITE firmware version:
Installation: Please read carefully the instructions for installing the firmware in the archive along with the firmware.
Only for devices that already have 9 android from the factory !!Do not mix up your device !!! This is for PX30 RK3326 - MCU should start with MTCX (where X may have different letters) !!! Go to Settings - System - About the device and see your model !!!
Download lite firmware version 1.0: https://yadi.sk/d/Qx8le85frD93ng
Mirror lite firmware version 1.0: https://mega.nz/#!5gIWiA4D!fFnVVrg_0scFzwd5-MpXCD44AYbpSjQ2tXD_1wRc-lI
Full firmware version :
All that is added in the lite version firmware of PLUS +:
Full root access (including the System section)
Six fully modified launchers with viewing tags of listening music (any music application), Bluetooth music and radio stations.
The ability to configure launchers (enable, disable unnecessary functions in the Settings) and the Weather settings in them and display speed via GPS.
Fixed GPS.
Improved location accuracy.
With a cold start - satellites are found in 40-70 seconds.
With a hot start (after sleep or reboot) - instantly.
Who had problems with USB ports or WiFi loss - fixed.
Initialization of USB and WiFi after a full system boot and after sleep.
A new method and settings for the white list of programs to start after sleep (located in Mod Settings - Mod Settings - System Settings)
New whitelist for adding third-party programs (for example Poweramp)
when launched, the sound will be muted for regular programs Music, radio, etc. (located in Settings Mod - Mod Settings - System Settings)
A new white list for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
Redone Launcher with support for day and night. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen.
- Clock, GPS speed, Weather, or choose to display your logo (download the logo on the Internet (for example, the logo of a BMW car),
in PNG format and preferably with a transparent backing and copy the file to the device’s internal memory)
The new graphic equalizer in the Music and Screensaver applications, with four different graphic equalizers and color choices.
3 types of screensavers with analog and digital clocks, with the ability to show speed by GPS, Weather, tag tags of listening music (any music application),
Bluetooth music and radio stations. Full customization of screensavers - color, font, disabling unnecessary functions, logo of your car, etc. in settings.
Change the screensaver view - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM application.
Customizable rear camera parking lines. You need to enable them in Settings - Settings related to the car - Advanced settings - Parking lines (ON)
Changed the volume panel and reduced the time of its disappearance.
Fully customizable Bar Status with the ability to enable and disable buttons and icons in it in Settings.
A reset button has been added to the Status Bar.
Screensaver, Music, Navigation, Bluetooth Music buttons have been added to the Status Bar (you can enable - disable in the settings)
Changed the function of calling the brightness panel in the Status Bar.
The screensaver now starts in all programs, in Settings there is a White List of applications where you can specify applications where the screensaver will not start.
Added the White List of Applications in Settings, where you can specify autorun after sleep.
Added equalizer ViperFX - settings can be viewed on the video
Changed the Bluetooth Music app.
Factory settings are changed for resolution 1024X600 and Russian translation is added.
Completely changed applications Music, Radio, Video.
Keyboard replaced by SwiftKey
You can execute your scripts in a folder System/etc/Init.d
Added online radio PCRadio (will appear if Wipe Data is done).
The icons in the Status Bar have been fixed for applications that have support day and night (bluetooth, Radio, launcher).
In the OEM application Added new Radio with support for day and night (translucent)
Go to the OEM application and install the application from there (there are screenshots there)
Added analog screensaver (located in OEM application)
Settings Mod - Mod Settings - System Settings - added Auto screen brightness by GPS.
Settings Mod - Display General - added Developer options.
In the OEM application - ScreenClockMalay - added an analog GPS screensaver for MPH (America and others who use MPH)
Support 1280X720 screen resolution
Four custom buttons have been added to screensavers to launch your programs.
Long press on the button - application selection.
Short press on the button - launch the application.
If you have installed the screensaver from the OEM application, you must reinstall it.
Added Music application with support for day and night (located in the OEM application)
Now you can configure the MODE button to launch your applications.
It is located in the Settings Mod - Mod Settings - System Settings - Selecting applications to start by pressing the MODE button.
If it is disabled, the standard method of the MODE button is used (start Radio-Music-Video)
A graphic equalizer has been added to the screensaver.
In the OEM application, another version of the Music application has been added.
Added the ability to automatically adjust sound by GPS speed.
It is located in Settings Mod - Mod Settings - System Settings - GPS Auto volume control .
Removed pop-up messages with auto brightness via GPS.
Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
It is located in Mod Settings - Display General - Pop-up notifications settings for players and Radio.
The new application for the equalizer, more options for tuning the DSP.
In the OEM application there are two types of equalizers, you can set which one you like
Video of the full version of firmware part 1:
Video of the full version of firmware part 2:
Download full firmware version 1.1: To get the FULL version of the firmware, you must download the LITE version of the firmware and read the instructions !!
Update for FULL version 1.1 dated January 25, 2020.
1. Added support for OTA updates via the Internet.
2. Updated graphic equalizer in Music and Screensaver + two new types of graphic equalizer. If you installed Music and Screensaver from the OEM application - you must reinstall them !!
3. New launcher CHS.
4. The new Bluetooth application for making calls. Now you can control the device during calls.
5. New Radio application - located in the OEM application (in the Radio_Mod folder - RADIO_CHS)
6. Fixed WiFi launch (on some devices it did not start automatically after reboot)
7. In Settings Mod - MOD Settings - Statusbar settings - Hide - Show icons in the statusbar - added complete hiding of the StatusBar panel.
8. Updated GPS auto brightness
9. Added TTL selection for modems and WiFi (selection of values from 23 to 256, default 64)
10. Fixed an alternative launch list for your applications using the MODE button
11. Fixed launch of navigation on the hardware button.
12. Added a list of applications that will automatically start after the device is booted (in Mod Settings - Mod Settings - System Settings)
13. Fixed choice of screensaver start time.
14. Many other corrections and additions.
Who has the full version 1.0 and 1.1 (from a different date) installed, write to me by e-mail.
To get the FULL version of the firmware, you must download the LITE version of the firmware and read the instructions !!
Important information! - https://forum.xda-developers.com/showpost.php?p=80099333&postcount=130
Who wants to translate Settings into their native language - https://forum.xda-developers.com/showpost.php?p=80203260&postcount=88
In the process of filling !!!
Only for devices that already have 9 android from the factory !!
Click to expand...
Click to collapse
PX30 and PX6 with Android 8.1 can be updated with Modinstaller Pro to Android 9.
https://youtu.be/X0qsmwnaQA8
So, i'm wondering, will this be faster / perform better then the original rom?
I've installed a cpu monitor, and it looks like this cpu doesn't really have much power.
The main reason I'm looking here for a custom rom is that i find my device rather slow , and i was hoping it would perform better, or maybe even overclock the device a bit?
pjottrr said:
So, i'm wondering, will this be faster / perform better then the original rom?
I've installed a cpu monitor, and it looks like this cpu doesn't really have much power.
The main reason I'm looking here for a custom rom is that i find my device rather slow , and i was hoping it would perform better, or maybe even overclock the device a bit?
Click to expand...
Click to collapse
You can try installing the firmware and checking. You can return to the factory firmware at any time.
thnx,
i'll try that
sorry for the edit in this post, i wasn't reading......
so that works great
now all i want is to upgrade to the full version
how can i get the full version?
I have a PX30 device with Android 8.1.0
Exist a solution to upgrade my device to Android 9 other than the Modinstaller Pro.
Hi how do we get full version?
I try couple of times to update this Lite version but with no luck... I have always error no. 21. Tried with factory reset and without reset, always got this same error. I have unit MTCE, PX30, mcu ver. MX3.30 and Android 9.0 (by Hal9k v4.0.0). Any suggestions what's wrong with my unit?
Just read the part about donation people getting the full version!! Thanks!
Email sent! Thanks again!
BTW, had the admin changed my user name from Arden to Cantrepeat.
Timpuli said:
I try couple of times to update this Lite version but with no luck... I have always error no. 21. Tried with factory reset and without reset, always got this same error. I have unit MTCE, PX30, mcu ver. MX3.30 and Android 9.0 (by Hal9k v4.0.0). Any suggestions what's wrong with my unit?
Click to expand...
Click to collapse
Hello! Install the factory version for the PX30 first - https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
S920 Version : PX30 HCT4_px30_9.0_ota(20191101) https://www.sendspace.com/pro/dl/eriohv
Then my firmware.
6mur6mur6 said:
Hi how do we get full version?
Click to expand...
Click to collapse
Hello! Download the LITE version. The archive has instructions for the full version.
Hi Malaysk,
Thnx again for this beatifull rom. just been configuring the full version to my liking for the past 2 hours....
i do mis only one feature ; the programming of the MODE button.
in your instructions you say:
It is located in the Mod Settings - Display General - Selecting applications to start by pressing the MODE button.
but i don't see that option there . is it located somewhere else , not working for my device, or just missing entirely in the px30 version?
do you have any suggestions to this?
Malaysk said:
Hello! Install the factory version for the PX30 first - https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
S920 Version : PX30 HCT4_px30_9.0_ota(20191101) https://www.sendspace.com/pro/dl/eriohv
Then my firmware.
Click to expand...
Click to collapse
Thank you, that do the trick.
Installed on an Eonon GA2176. Full install and working well!
Thanks for the work on the ROM. Great to be root and free of factory ROM!
pjottrr said:
Hi Malaysk,
Thnx again for this beatifull rom. just been configuring the full version to my liking for the past 2 hours....
i do mis only one feature ; the programming of the MODE button.
in your instructions you say:
It is located in the Mod Settings - Display General - Selecting applications to start by pressing the MODE button.
but i don't see that option there . is it located somewhere else , not working for my device, or just missing entirely in the px30 version?
do you have any suggestions to this?
Click to expand...
Click to collapse
I am sorry. I made a mistake in the description. Corrected to the correct description!
Settings Mod - Mod Settings - System Settings - Selecting applications to start by pressing the MODE button.
Malaysk said:
I am sorry. I made a mistake in the description. Corrected to the correct description!
Settings Mod - Mod Settings - System Settings - Selecting applications to start by pressing the MODE button.
Click to expand...
Click to collapse
Thnx, i thought i had looked there as well, but apparently i missed it,
i found the setting, set it up , yet it doesn't seem to work.
i used the wheel key study to bind the mode button to "mode" , is that a correct setup , or should i do something differently?
hi is there anyway to make the icons smaller in the status bar, i think you could in the lite version?
thanks
Running the Full version, everything seems to work well, thanks a lot ! ! !
Hi @Malaysk, quick and noobie question as I'd love to try the lite version before buying the full one:
I'm running a PX30, but a CHS one.
My build number doesn't mention the RK3326 (the guy that installed the unit updated the original rom to this one: https://yadi.sk/d/umCvHqCDzHccr/RockChip PX30 Android 9/CHS ).
Photo from my unit:
https://photos.app.goo.gl/svDPfkQ7em4x6YUh7
I know I can always back up in recovery and rollback, but I'm kind of afraid I might make some stupid mistake by flashing this one and bricking the unit somehow due to some incompatibility. Do you know if it's compatible at all?
Cheers and thanks for your work!
Only for devices processor Rockchip PX6, MCU - MTCD, MTCE Android 10.0 !
Mod Q 10.0 Android PX6 RK3399For PX5 RK3368 mod 10 android is HERE
Only for those who have 10 android installed, a PX6 processor and have an installed MCU that starts with MTC (X) - where X can have different letters.
With firmware device, you need to understand all the risks. Neither I nor the website is not responsible for your actions and possibly killed devices! Everything you do - you do at your own peril and risk.
Before installing the firmware, be sure to try to get into the Recovery (I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times ).
IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product (this is due to the fact that in 10 android these sections are dynamic and protected by the android itself from changes)- otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
How do you know if your device is suitable for this forum thread? You can see the device in Settings - System - About device: look at the photo
What's added, fixed in LITE firmware version:
Can't update Magisk module !! Only Magisk Manager can be updated!
Root access (Magisk) 8.0.2
IMPORTANT!! : You cannot change the firmware versions in the system partitions in LITE - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Added ESFileExplorer, RootExplorer programs.
Two modified launchers with the ability to customize them (located in Mod Settings).
Enabled the ability to start the screensaver and set the start time to 15-30 seconds 1-3-5-7-10 minutes.
By default, video viewing while driving is enabled and audio mute in Navigation is set to -3.
Changed basic Settings.
Possibility to set viewing of Internet traffic speed in the Status Bar.
Ability to change color and gradient in the Status Bar.
Many other changes and additions.
Installing LITE firmware version:
Unzip the archive and write the Update.zip file to a SD card or USB flash drive (must be formatted in FAT32). Insert into the loaded device. After a few seconds, the update menu will appear. We put a checkmark on Wipe Data (you will lose all your installed programs) and click on the Install button. See the screenshot below. The machine will reboot and the firmware installation will begin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download LITE version:
Version updated as of March 28, 2022.
Be sure to read the instructions inside the archive, along with the firmware !!!
I want to warn you: Everything that you do, you do at your own peril and risk.
Can't update Magisk module !! Only Magisk Manager can be updated!
Download: https://disk.yandex.ru/d/Nd7qBuyMn2VgnQ
Mirror: https://mega.nz/file/Y5gXyC5a#SRQAjJy5DbZtI97wBenpXdlpVm1H810t5D1mGKhPPpU
----------------------------------------------
What's added, fixed in FULL firmware version:
Can't update Magisk module !! Only Magisk Manager can be updated!
Full root access (Magisk)
IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Seven completely modified launchers with the ability to view tags for listening to music (any music app), Bluetooth music and radio stations.
The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disabling unnecessary functions, your car logo, etc. In the settings.
Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
Reload key added to the status bar.
Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
Changed the function of calling the brightness panel in the status bar.
The screensaver is now launched in all programs, in the Mod Settings there is an Application Whitelist, where you can specify applications where the screensaver will not start.
Added a list of applications in the Mod settings, where you can specify autostart after sleep.
Added equalizer ViperFX - you can watch the settings in the video
Changed Bluetooth Music app.
Applications Music, Radio, Video have been completely changed. You can install standard applications from the OEM application.
Video files can be played in the background.
Now when you switch on rear view camera the brightness is in creased up to maximum automatically
4 different types of radio apps have been added in the OEM app (including radio with Day and Night support)
Go to the OEM app and install the app from there.
3 different types of Music app have been added in the OEM app.
Split screen support (not all apps support)
Added online radio PCRadio
Mod settings - MOD Settings - System settings - added automatic screen brightness by GPS.
Supports 1280X720 and 1024X600 screen resolutions.
Added four customizable buttons to screensavers to launch your programs.
- Long press on the button - select the application.
- Short press on the button - start the application.
You can now configure the MODE button to launch your applications.
- Located in Mod Settings - MOD Settings - System Settings - Select applications to launch by pressing the MODE button.
- If it is disabled, the standard method of operation of the MODE button is used (launching Radio-Music-Video)
Added the ability to automatically adjust the sound based on GPS speed.
Located in Settings mod - MOD Settings - Sound settings - Auto volume control by GPS.
Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
Located in Mod Settings - MOD Settings - System Settings - Popup Settings.
Fixed GPS work.
- Improved location accuracy.
- With a cold start - satellites are located in 40-70 seconds.
- With a hot start (after sleep or reboot) - instantly.
Anyone who had problems with USB ports or missing WiFi - fixed.
USB and WiFi are initialized after the system is fully booted and after sleep.
New method and settings of the whitelist of programs to run after sleep (located in Mod Settings - Mod Settings - System Settings)
New whitelist for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
Redesigned Launcher with day and night support. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen
- Clock, GPS speed, Weather or choose to display your logo (download a logo on the Internet (for example, a BMW car logo),
in PNG format and preferably with a transparent background and copy the file to the device's internal memory)
If after updating the firmware, every time the system boots, the location permissions for the launcher are asked, go to Mod Settings - Mod Settings -
Launcher Settings - Launcher with day and night support and enable GPS speed display.
New graphic equalizer in Music and Screensaver apps, with four different graphic equalizers and color selection.
You can now set the time for showing music and radio notifications in Mod Settings from 1 to 10 seconds.
You can change the DPI of the screen. The range is from 260dpi to 160dpi (standard 220 by default) - I set it to 200dpi. Located - Mod Settings - Mod Settings - System Settings.
You can assign the launch of your applications to the buttons on the steering wheel or on the front panel of the device. Located in Mod Settings - Mod Settings - Car (as you select applications there, then assign buttons through the standard application, for setting the buttons on the steering wheel, for example). - you can watch the video on how to configure -
More flexible graphic equalizer settings are in Mod Settings - Mod Settings - Sound Settings.
Mod Settings - Mod Settings - Car - added GPS fix (enabled by default).
Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
Configurable rear camera parking lines, you need to go to Settings Mod – Car - related settings – Extra settings and enable 1-2-3 type of Rear view ruler.
- In Mod Settings - MOD Settings - System Settings - Pop-up Notification Settings - added settings:
1. Enable display of album covers (picture)
2. Covers display size in px (pixels) - from 10 px to 100 px
- Fixed autostart Nav Radio + after sleep (it won't start from the background)
- Added French and Polish translation to Mod Settings (thanks to oxygen and XDA users)
- In the Bluetooth application, the panel for incoming and outgoing calls has been changed.
- Added display of covers from players (including standard player, online players, third-party players) in the screensaver. - only for PX5 and PX6, if the screensaver was installed from the OEM application before, then you need to reinstall it from there.
Located in Mod Settings - Mod Settings - Screensaver Settings
1. Enable display of covers (on by default)
2. Set the transparency level of the picture
- Added the ability to display radio station logos in the Radio application, pop-up notifications, in the screensaver.
All Radio applications that have the ability to display logos are in the OEM application and have the word _logos at the end of the name, for example
HCT4Radio_MOD_Malay_logos.apk
HLARadio_MOD_Mal_logos.apk
MTCRadio_MAL_NEW_logos.apk
Question: What needs to be done to show the logos of radio stations?
Answer :
1. Download, for example, this archive of logos - https://disk.yandex.ru/d/696euyOc9YLmiQ or download them from the Internet.
2. The picture must be in .png format, preferably with a resolution of 250X250 px or 500X500 px (the higher the resolution, the better the picture will be shown in the screensaver)
3. Find out the frequencies of radio stations in your city by entering into Google search "frequencies of radio stations (your city)"
4. Rename pictures in .png format with the name of the radio station frequency. For example: there is a radio station Record, it broadcasts in your city at a frequency of 102.3 -
rename the picture with the name 102.3.png.
5. Create a Radio folder and copy all your pictures there.
6. Copy the Radio folder to the root of the sdcard internal memory.
- Ability to disable autorun of standard applications after loading or after sleep. Located in Settings MOD - Mod Settings - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT.
- Ability to change the theme Day - Night automatically by Auto screen brightness by GPS. Located in Settings MOD - Settings Mod - System Settings - Auto screen brightness by GPS - Change automatically the Day / Night theme (it is advisable to reboot later so that the changes apply)
- Added DFX Light Processing 2 impulse to ViperFX, which radically changes the sound on the device. It needs to be activated in ViperFX.
- Improved overall work speed.
- Changes to GPS signal processing.
- Completely rewritten from scratch Gps Parser, added support for A-GPS data from the chip side, positioning accuracy in open areas increased to 0-1 meters. (for PX5 - PX6)
- In Mod Settings - Mod settings - Car - added a new setting to change the GPS grouping - Replacing GPS + GLONAS with GPS + BEIDOU
- Added the function "Change commands for switching tracks using the right wheel (spinner)" - in Settings Mod - Mod settings - Car. If your right wheel does not switch music tracks in third-party players, you can try turning it on.
EasyConnected has been updated to the latest version.
Can't update Magisk module !! Only Magisk Manager can be updated!
Many other fixes and additions.
Installing FULL firmware version:
You must download the LITE version, read the instructions inside the archive and be sure to install the LITE version on your device.
Download FULL version:
Installation only on LITE firmware version and only through online update. Download the LITE version and read the instructions inside the archive.
VIDEO FULL version
Online update 1.1.8.5 released on August 12, 2021
Online update 1.2 released on 02 October, 2021
Online update version 1.2.2 from 03 December 2021
Online update 1.2.8 from 27 July 2022
Latest BETA firmware version 1.2.9.2 dated November 15, 2022
Sample ViperFX settings -
About Iphone and WiFi: https://forum.xda-developers.com/t/...-rk3399-with-android-10.4176069/post-86043843
If you do not run applications where authorization is required : https://forum.xda-developers.com/t/...-rk3368-with-android-10.4175209/post-87005437
Important information (announcement of future OTA updates) - https://forum.xda-developers.com/t/...-rk3399-with-android-10.4176069/post-84457255
Who wants to translate Settings into their native language - https://forum.xda-developers.com/an...roid-6-8-9-t3955343/post80203246#post80203246
----------------------------------------------
Many thanks to the respected Graser from the 4PDA forum for invaluable help in creating the firmware!
+++++++++++++++++++++++++++++
This post is in edit mode! Errors and inaccuracies are possible!
Please excuse me in advance! I very rarely answer questions and do not use private messages!
Restoring the PX6 MTCE device on the 10 android.Also, using this method, go from 9-10 android to 10 android.
I want to warn you: Everything that you do, you do at your own peril and risk.
Create bootable SD card 10 Android PX6.
Important!!! : very demanding on the type of SD card !! I started installing the firmware when I changed 5 different SD cards from different manufacturers !!!!!
1. Unzip the bootable_sd_card_10_android_PX6 archive to C:/ disk on a laptop or computer.
2. Run SD_Firmware_Tool.exe (as administrator)
3. Select the firmware in .IMG - update_10_android_zavod_PX6.img
4. Click on the Create button.
5. After creating the SD card, insert it into the device and reboot it. The firmware installation will start automatically. Installation will take a very long time, about 40-60 minutes !!!!!
Restoring a SD card after restoring the device:
Download: https://disk.yandex.ru/d/giQ3qdmL_8TR0w
If we have purchased your firmware for 9.0 full, do we need to do another purchase for this android 10 version?
Also, what's the upgrade procedure like for those of us coming off of malaysk 9.0?
I wonder if the upgrade is even worth it? Does your android 10 bring anything extra to the table? Love your android 9 firmware!
Thank you the best rom for px6 a10 so far !
stokedcrf said:
If we have purchased your firmware for 9.0 full, do we need to do another purchase for this android 10 version?
Also, what's the upgrade procedure like for those of us coming off of malaysk 9.0?
I wonder if the upgrade is even worth it? Does your android 10 bring anything extra to the table? Love your android 9 firmware!
Click to expand...
Click to collapse
@Malaysk hasnt confirmed Bluetooth support in Android 10, it's likely that MD-725 (RTL) isnt supported, so many devices might not have working Bluetooth on these versions. There may be other BT types not supported, but @Malaysk hasnt confirmed supported devices at all.
ok so i'm not entirely sure what the lite version actually consists of. I appreciate that it says a lot of things have been changed and added in the FULL version. But are we talking that the LITE version is just stock rom with a couple of launchers , root and a few other apps?
what rom is it actually based on or is it compiled from fresh?
is the lite version going to give me enough difference from stock 10 i have on my current unit in terms of speed, responsiveness and suchlike to make it worthwhile basically starting afresh?
bear in mind that i'm new to these devices and i've not installed any custom roms like this or hal9k on it before (plenty of experience with phones /tablets though)
Malaysk said:
Only for devices processor Rockchip PX6, MCU - MTCD, MTCE Android 10.0 !
Mod Q 10.0 Android PX6 RK3399
For PX5 RK3368 mod 10 android is HERE
Only for those who have 10 android installed, a PX6 processor and have an installed MCU that starts with MTC (X) - where X can have different letters.
With firmware device, you need to understand all the risks. Neither I nor the website is not responsible for your actions and possibly killed devices! Everything you do - you do at your own peril and risk.
Before installing the firmware, be sure to try to get into the Recovery (I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times ).
IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product (this is due to the fact that in 10 android these sections are dynamic and protected by the android itself from changes)- otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
How do you know if your device is suitable for this forum thread? You can see the device in Settings - System - About device: look at the photo
What's added, fixed in LITE firmware version:
Root access (Magisk) 8.0.2
IMPORTANT!! : You cannot change the firmware versions in the system partitions in LITE - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Added ESFileExplorer, RootExplorer programs.
Two modified launchers with the ability to customize them (located in Mod Settings).
Enabled the ability to start the screensaver and set the start time to 15-30 seconds 1-3-5-7-10 minutes.
By default, video viewing while driving is enabled and audio mute in Navigation is set to -3.
Changed basic Settings.
Possibility to set viewing of Internet traffic speed in the Status Bar.
Ability to change color and gradient in the Status Bar.
Many other changes and additions.
Installing LITE firmware version:
Unzip the archive and write the Update.zip file to a SD card or USB flash drive (must be formatted in FAT32). Insert into the loaded device. After a few seconds, the update menu will appear. We put a checkmark on Wipe Data (you will lose all your installed programs) and click on the Install button. See the screenshot below. The machine will reboot and the firmware installation will begin.
Download LITE version:
Be sure to read the instructions inside the archive, along with the firmware !!!
I want to warn you: Everything that you do, you do at your own peril and risk.
Download: https://yadi.sk/d/Tz3MyqYQdzr38Q
Mirror: https://mega.nz/file/NxZjzQjB#I13RRu_Lb5VAnt4EJ1VkjOtwDfPF2j6rKxhJ4BbOuLk
----------------------------------------------
What's added, fixed in FULL firmware version:
Full root access (Magisk)
IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Seven completely modified launchers with the ability to view tags for listening to music (any music app), Bluetooth music and radio stations.
The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disabling unnecessary functions, your car logo, etc. In the settings.
Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
Reload key added to the status bar.
Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
Changed the function of calling the brightness panel in the status bar.
The screensaver is now launched in all programs, in the Mod Settings there is an Application Whitelist, where you can specify applications where the screensaver will not start.
Added a list of applications in the Mod settings, where you can specify autostart after sleep.
Added equalizer ViperFX - you can watch the settings in the video
Changed Bluetooth Music app.
Applications Music, Radio, Video have been completely changed. You can install standard applications from the OEM application.
Video files can be played in the background.
Now when you switch on rear view camera the brightness is in creased up to maximum automatically
4 different types of radio apps have been added in the OEM app (including radio with Day and Night support)
Go to the OEM app and install the app from there.
3 different types of Music app have been added in the OEM app.
Split screen support (not all apps support)
Added online radio PCRadio
Mod settings - MOD Settings - System settings - added automatic screen brightness by GPS.
Supports 1280X720 and 1024X600 screen resolutions.
Added four customizable buttons to screensavers to launch your programs.
- Long press on the button - select the application.
- Short press on the button - start the application.
You can now configure the MODE button to launch your applications.
- Located in Mod Settings - MOD Settings - System Settings - Select applications to launch by pressing the MODE button.
- If it is disabled, the standard method of operation of the MODE button is used (launching Radio-Music-Video)
Added the ability to automatically adjust the sound based on GPS speed.
Located in Settings mod - MOD Settings - Sound settings - Auto volume control by GPS.
Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
Located in Mod Settings - MOD Settings - System Settings - Popup Settings.
Fixed GPS work.
- Improved location accuracy.
- With a cold start - satellites are located in 40-70 seconds.
- With a hot start (after sleep or reboot) - instantly.
Anyone who had problems with USB ports or missing WiFi - fixed.
USB and WiFi are initialized after the system is fully booted and after sleep.
New method and settings of the whitelist of programs to run after sleep (located in Mod Settings - Mod Settings - System Settings)
New whitelist for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
Redesigned Launcher with day and night support. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen
- Clock, GPS speed, Weather or choose to display your logo (download a logo on the Internet (for example, a BMW car logo),
in PNG format and preferably with a transparent background and copy the file to the device's internal memory)
If after updating the firmware, every time the system boots, the location permissions for the launcher are asked, go to Mod Settings - Mod Settings -
Launcher Settings - Launcher with day and night support and enable GPS speed display.
New graphic equalizer in Music and Screensaver apps, with four different graphic equalizers and color selection.
You can now set the time for showing music and radio notifications in Mod Settings from 1 to 10 seconds.
You can change the DPI of the screen. The range is from 260dpi to 160dpi (standard 220 by default) - I set it to 200dpi. Located - Mod Settings - Mod Settings - System Settings.
You can assign the launch of your applications to the buttons on the steering wheel or on the front panel of the device. Located in Mod Settings - Mod Settings - Car (as you select applications there, then assign buttons through the standard application, for setting the buttons on the steering wheel, for example). - you can watch the video on how to configure -
More flexible graphic equalizer settings are in Mod Settings - Mod Settings - Sound Settings.
Mod Settings - Mod Settings - Car - added GPS fix (enabled by default).
Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
Configurable rear camera parking lines, you need to go to Settings Mod – Car - related settings – Extra settings and enable 1-2-3 type of Rear view ruler.
EasyConnected has been updated to the latest version.
Many other fixes and additions.
Installing FULL firmware version:
You must download the LITE version, read the instructions inside the archive and be sure to install the LITE version on your device.
Download FULL version:
Installation only on LITE firmware version and only through online update. Download the LITE version and read the instructions inside the archive.
----------------------------------------------
Many thanks to the respected Graser from the 4PDA forum for invaluable help in creating the firmware!
+++++++++++++++++++++++++++++
This post is in edit mode! Errors and inaccuracies are possible!
Please excuse me in advance! I very rarely answer questions and do not use private messages!
Click to expand...
Click to collapse
Tried the update but won't recognize when my usb drive is inserted . I just updated to latest from Dasaita so I know it works what am I missing here ?
My pic uploads failed but I do have a PX6 MTCE HA 1280x720
thefunkygibbon said:
ok so i'm not entirely sure what the lite version actually consists of. I appreciate that it says a lot of things have been changed and added in the FULL version. But are we talking that the LITE version is just stock rom with a couple of launchers , root and a few other apps?
what rom is it actually based on or is it compiled from fresh?
is the lite version going to give me enough difference from stock 10 i have on my current unit in terms of speed, responsiveness and suchlike to make it worthwhile basically starting afresh?
bear in mind that i'm new to these devices and i've not installed any custom roms like this or hal9k on it before (plenty of experience with phones /tablets though)
Click to expand...
Click to collapse
Funky Did you get it to work ? I tried my unit does not recognise the update file on the Flash Drive , Also did you first go into recovery mode if you did?
Cheers
ToyotaJay said:
Funky Did you get it to work ? I tried my unit does not recognise the update file on the Flash Drive , Also did you first go into recovery mode if you did?
Cheers
Click to expand...
Click to collapse
hi, no i've not attempted to yet since part of me is reluctant to give money for the rom, from what i can tell the 'lite' version is not a lot different to stock so isn't indicative of the one that he wants you to pay money for. plus i'm not paying money when the guy rarely supports his 'product'.
waiting for hal9k's rom
Hello,
the rom is verdy good.
Thanks.
But the EQ is very poor.
Can we install the EQ from Hal9k v4 or from AAS?
Updating from an existing Android 10, I got a status 7 error when updating to lite - what am I possibly doing wrong ???
thefunkygibbon said:
ok so i'm not entirely sure what the lite version actually consists of. I appreciate that it says a lot of things have been changed and added in the FULL version. But are we talking that the LITE version is just stock rom with a couple of launchers , root and a few other apps?
what rom is it actually based on or is it compiled from fresh?
is the lite version going to give me enough difference from stock 10 i have on my current unit in terms of speed, responsiveness and suchlike to make it worthwhile basically starting afresh?
bear in mind that i'm new to these devices and i've not installed any custom roms like this or hal9k on it before (plenty of experience with phones /tablets though)
Click to expand...
Click to collapse
i have not tried this version as but i used the previous version
the lite release give you more futures than stock but it is not meant to be used full time it meant to be a test drive for this ROM before you pay anything
the money go to support the developer to help improve this ROM
The full release add soo many futures that you can not get on stock
---------- Post added at 12:10 PM ---------- Previous post was at 12:05 PM ----------
ToyotaJay said:
Funky Did you get it to work ? I tried my unit does not recognise the update file on the Flash Drive , Also did you first go into recovery mode if you did?
Cheers
Click to expand...
Click to collapse
Are coming from android 9 or 10?
For 10 it should work (but I have not tried)
For 9 you can not upgrade directly from 9 to 10 like that
you need a special method
in here
https://forum.xda-developers.com/an...nt/upgrade-method-to-android-version-t4132123
Deleted
FredFromBerks said:
Updating from an existing Android 10, I got a status 7 error when updating to lite - what am I possibly doing wrong ???
Click to expand...
Click to collapse
me too...status 7
omg this thing its real!!!
FredFromBerks said:
Updating from an existing Android 10, I got a status 7 error when updating to lite - what am I possibly doing wrong ???
Click to expand...
Click to collapse
I tried it too after rooting my head unit and I got the same error.
Al Ferro said:
I tried it too after rooting my head unit and I got the same error.
Click to expand...
Click to collapse
Same issue happens to me. I come from a rooted device on 10 but the reset to factory default, resets itself without root, therefore early root might not be the issue.
Px5 or px6
Hey Malaysk
I like you Rom. And installed your Rom in a previews device, made a contribution. But right now I have other device and I am a bit confused. Is it a a px5 or px6. It has an android 10.
Thanks
kalewsiukas said:
Hey Malaysk
I like you Rom. And installed your Rom in a previews device, made a contribution. But right now I have other device and I am a bit confused. Is it a a px5 or px6. It has an android 10.
Thanks
Click to expand...
Click to collapse
its neither. do NOT install this rom
thefunkygibbon said:
its neither. do NOT install this rom
Click to expand...
Click to collapse
thnx for the answer. is there any kind of the rom to update? because right now is a bit disgusting