Database Info

[Guide][Root] Micromax Canvas 6 Pro

Root Micromax Canvas 6 Pro​
Method 1:
You can root your Micromax Canvas 6 Pro using Kingroot by this method.
Your device should be adequately charged.
Take backup of your important data at safe place.
Download latest Kingroot apk from this link.
Enable Unknown Sources from Security option in Settings.
Install the the Kingroot app.
Open Kingroot app.
Follow in-app instructions to root Micromax Canvas 6 Pro.
Method 2:
If method 1 fails to root Micromax Canvas 6 Pro, then you can this second method. Be careful as this method requires more attention.
1. Download any of the custom recovery attached in this post.
2. Download SuperSU from here.
3. Install ADB and Fastboot drivers on your PC from here.
4. Enable Developer options in your device. Go to About phone. Tap 7 times on build number. This will enable Developer Options.
5. Enable USB Debugging from Developer Options Settings.
6. Transfer Supersu zip and custom recover zip to your external SD card.
7. Now open a command window inside the folder where you have installed ADB and Fastboot drivers. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.
8. Reboot your device in fastboot mode using this command
adb reboot bootloader
9. Now use this command to install recovery. First unzip downloaded recovery zip and find .img file. Rename it to recovery.img
fastboot flash recovery recovery.img
10. Now boot into recovery using following command.
fastboot boot recovery.img
11. You will be booted into your chosen recovery.
12. Now flash Supersu zip from your chosen recovery.
13. Process completed.
Warning: I am not responsible if anything goes wrong, bricked device.

hi i tried to flash recovery but unfortunately i got the message
writing 'recovery'... FAILED (remote: download for partition 'recovery' is not allowed)
I need to know how to unlock bootloader for micromax canvas 6 pro to flash recovery.
Thank you

hari007sh said:
writing 'recovery'... FAILED (remote: download for partition 'recovery' is not allowed)
I need to know how to unlock bootloader for micromax canvas 6 pro to flash recovery.
Thank you
Click to expand...
Click to collapse
Use the following command to unlock bootloader when you are in fastboot mode
Code:
fastboot oem unlock

still nobody intresting to launch stock and custom roms for micromax canvas 6 plus......time passsing away....

never ever (i mean it when i say) try fastboot oem unlock on this device will hard brick your device... even recovery wont open.....Have suffered myself..

Can you port cyanogen mod to Canvas 6 Pro?
bravonova said:
Root Micromax Canvas 6 Pro​
Method 1:
You can root your Micromax Canvas 6 Pro using Kingroot by this method.
Your device should be adequately charged.
Take backup of your important data at safe place.
Download latest Kingroot apk from this link.
Enable Unknown Sources from Security option in Settings.
Install the the Kingroot app.
Open Kingroot app.
Follow in-app instructions to root Micromax Canvas 6 Pro.
Method 2:
If method 1 fails to root Micromax Canvas 6 Pro, then you can this second method. Be careful as this method requires more attention.
1. Download any of the custom recovery attached in this post.
2. Download SuperSU from here.
3. Install ADB and Fastboot drivers on your PC from here.
4. Enable Developer options in your device. Go to About phone. Tap 7 times on build number. This will enable Developer Options.
5. Enable USB Debugging from Developer Options Settings.
6. Transfer Supersu zip and custom recover zip to your external SD card.
7. Now open a command window inside the folder where you have installed ADB and Fastboot drivers. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.
8. Reboot your device in fastboot mode using this command
adb reboot bootloader
9. Now use this command to install recovery. First unzip downloaded recovery zip and find .img file. Rename it to recovery.img
fastboot flash recovery recovery.img
10. Now boot into recovery using following command.
fastboot boot recovery.img
11. You will be booted into your chosen recovery.
12. Now flash Supersu zip from your chosen recovery.
13. Process completed.
Warning: I am not responsible if anything goes wrong, bricked device.
Click to expand...
Click to collapse
I think it's a decent device & good hardware specs. Many people would be most thankful if you can port Cyanogem Mod on Canvas 6 Pro

Sashank Sharma said:
I think it's a decent device & good hardware specs. Many people would be most thankful if you can port Cyanogem Mod on Canvas 6 Pro
Click to expand...
Click to collapse
No.

micromax e485 recovery
Any scope for micromax e485 recovery ???????
Want recovery badly:

Resurrection Remix
please port roms

bravonova said:
Use the following command to unlock bootloader when you are in fastboot mode
Code:
fastboot oem unlock
Click to expand...
Click to collapse
Hello!
I tried to root my Micromax E484 with the Method No. 2 given by you!
All went fine till the command - fastboot flash recovery recovery.img
But, after entering next command which is - fastboot boot recovery.img - it gave an error - FAILED : UNKNOWN COMMAND
Now, the problem is that my phone is not booting at all. I get a screen of TWRP and then the fon restarts automatically and this thing keeps on happening!
Can you pls. help me? What should be done now in order for the phone to boot up normally? Pls..

Micromax-E484- Easy Way to Root By SP tool
There is also other way to root Your Micromax E484 ( Canvas 6 Pro)
Requirement:
1. SP Flash Tool
2. TWRP Recovery ZIP
3. Supersu Binary..zip..
4. Scatter File of E484 Firmware
5. preloader_lcsh6795_lw_hz_l1.bin
6. MediaTek Driver Vcom Driver
Download All Requirement Files.
Frist Install MediaTek Vcom Driver in your PC or Laptop......(Win..Xp, 7, 8 or Higher)
Make a Folder (By any Name) Extract TWRP zip (there is a "recovery.img" , We need this file), Scatter File "MT6795_Android_scatter.txt" and "preloader_lcsh6795_lw_hz_l1.bin" in this folder.
So Now there are two File in New Folder 1. recovery.img, 2. Scatter File "MT6795_Android_scatter.txt" and 3. "preloader_lcsh6795_lw_hz_l1.bin" Files
Now Open SP Flash Tool zip and Extract it and Open "flash_tool.exe" and Go to Download Tab then Load "MT6795_Android_scatter.txt" file form Option of "Scatter Loading File" (From that folder where you Put "MT6795_Android_scatter.txt" File)
Now Recovery.img and "preloader_lcsh6795_lw_hz_l1.bin" files will be Loaded Automatically in this Tool
Now insert Supersu Binary zip into your SD Card...
Now Switch of Your Mobile.....
Click...Download and Attach Your Mobile to PC/Laptop.........
Wait while ......Till Download OK Green Tick Show... it means File Downloaded Successfully...
Now Plug Out your Phone and Press "Volumn +" and "Power Botton" at the Time...Wait While untill Phone Boot and Realease All Bottons as soon as Android Logo Comes.....
Now TWRP Recovery............ Install > SD Card (Browse Your Supersu Binary Zip > Select.... Supersu Binary .zip > Swipe to Flash... After Successfully Flash....Reboot Your System....
Now Your Phone has been Rooted.........
Now Enjoy....With Your TWRP and Rooted Devise....
Link to Download FIles
""https://drive.google.com/open?id=1_GvHvgimSh8lllguNN5gPs8F_JdvZNSl""

msathaiah said:
Any scope for micromax e485 recovery ???????
Want recovery badly:
Click to expand...
Click to collapse
Please see this
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
---------- Post added at 08:27 AM ---------- Previous post was at 08:24 AM ----------
techie_vintage said:
Hello!
I tried to root my Micromax E484 with the Method No. 2 given by you!
All went fine till the command - fastboot flash recovery recovery.img
But, after entering next command which is - fastboot boot recovery.img - it gave an error - FAILED : UNKNOWN COMMAND
Now, the problem is that my phone is not booting at all. I get a screen of TWRP and then the fon restarts automatically and this thing keeps on happening!
Can you pls. help me? What should be done now in order for the phone to boot up normally? Pls..
Click to expand...
Click to collapse
See this if it help you
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2

I am having the same problem how do i solve it ?
techie_vintage said:
Hello!
I tried to root my Micromax E484 with the Method No. 2 given by you!
All went fine till the command - fastboot flash recovery recovery.img
But, after entering next command which is - fastboot boot recovery.img - it gave an error - FAILED : UNKNOWN COMMAND
Now, the problem is that my phone is not booting at all. I get a screen of TWRP and then the fon restarts automatically and this thing keeps on happening!
Can you pls. help me? What should be done now in order for the phone to boot up normally? Pls..
Click to expand...
Click to collapse
Pls help

Still in bootloop
Jack2jadav said:
Please see this
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
---------- Post added at 08:27 AM ---------- Previous post was at 08:24 AM ----------
See this if it help you
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
Click to expand...
Click to collapse
I had the same problem and I tried all the steps mentioned above still in boot loop
I tried this and it was still in bootloop and the it suddenly loaded into twrp somehow
Thank you so much
---------- Post added at 12:16 PM ---------- Previous post was at 11:38 AM ----------
Jack2jadav said:
Please see this
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
---------- Post added at 08:27 AM ---------- Previous post was at 08:24 AM ----------
See this if it help you
https://forum.xda-developers.com/an...romax-canvas-6-micromax-canvas-t3387886/page2
Click to expand...
Click to collapse
I am stuck at twrp, am not able to wipe data
It says failed to mount '/data'
What should I do

[ROOT][TWRP][CWM] Galaxy Core 2(SM-G355H/M/HN)

POST#1 = ROOT
POST#2 = TWRP
POST#3 = CWM
ROOT
TESTED AND WORKING ON SM-G355H. MAY WORK FOR OTHERS, TRY AND U'LL KNOW
NO RISK
METHOD
1. Download the attached KingRoot.zip file and save it on external storage
2. Turn off your phone, and boot into recovery (Volume Up+Home+Power)
3. Select 'apply update from zip'/'Install'
4. Locate and choose the KingRoot.zip and flash
Now Reboot and your Core 2 is rooted.​

TWRP
FLASHABLE TWRP UPDATED
FLASHABLES GIVEN FOR G355H/HN/M
NOTE: THIS TWRP ZIP IS FLASHABLE VIA RECOVERY, NO NEED FOR ODIN
METHOD IF USING STOCK RECOVERY
1. Download the given TWRP.zip file and save on EXTERNAL storage
2. Boot into recovery (Volume Up+Home+Power)
3. "Apply update from sd card"
4. Choose TWRP.zip and flash
METHOD IF USING ANY CUSTOM RECOVERY
1. Download the attached TWRP.zip file and save ANYWHERE
2. Boot into recovery (Volume Up+Home+Power)
3. Install zip
4. Choose TWRP.zip and flash
Cheers....you've got TWRP Recovery.....:laugh::laugh:
DOWNLOAD ZONE
TWRP 3.0-SM-G355H
TWRP 3.0-SM-G355M
TWRP 3.0-SM-G355HN
NOW WITH UPDATED LINKS.....ENJOY​

CWM
CWM
INSTALLING VIA ODIN USING PC (WINDOWS)
METHOD
1. Download and install Samsung mobile drivers on PC
2. Download the CWM file and save it on PC
3. Extract the CWM zip and you'll see a "recovery.tar.md5" file
4. Extract and open Odin on PC
5. Go into "Downloading Mode" by Holding (Volume Down+Home+Power)
6. You'll see a warning screen, press Volume Up to continue
7. Once you see the DOWNLOADING screen, connect your phone to the PC
8. You'll see an "ADDED" message in Odin
9. Now select PDA or AP and browse the "recovery.tar.md5" file and select it
10. In the Odin options ONLY tick "Auto Reboot" and "F.Reset Time"
11. Press START, wait for the flashing and you'll see a PASS message
Your phone will reboot
Now disconnect your phone
and check for CWM
DOWNLOAD ZONE
Samsung Mobile Drivers- 32 bit x86-PC
Samsung Mobile Drivers- 64 bit x64-PC
Odin for PC
CWM Recovery
​

Thanks

MicroZans said:
Thanks
Click to expand...
Click to collapse
Youre welcome

sir in my case sm-g355h
Call back is turned off
could not find proximity sensor under call settings
have done successfully
ROOT
TWRP
CWM
still annoying double tap comes during dial or during call
how to get rid it
thanks

What does "Mount Data, cache, dystrm" means?!
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
I can't access the urn of twrp sir

TechSTER™ said:
FLASHABLE TWRP UPDATED
FLASHABLES GIVEN FOR G355H/HN/M
NOTE: THIS TWRP ZIP IS FLASHABLE VIA RECOVERY, NO NEED FOR ODIN
METHOD IF USING STOCK RECOVERY
1. Download the given TWRP.zip file and save on EXTERNAL storage
2. Boot into recovery (Volume Up+Home+Power)
3. "Apply update from sd card"
4. Choose TWRP.zip and flash
​
Click to expand...
Click to collapse
Hello, I tried this with a G355M but when I enter twrp mode, the touch screen doesn't work so I'm not able do do anything. Is there any solution for this?​

Sir can You please tell a custom rom also about SM-G33H

techster69 said:
POST#1 = ROOT
POST#2 = TWRP
POST#3 = CWM
ROOT
TESTED AND WORKING ON SM-G355H. MAY WORK FOR OTHERS, TRY AND U'LL KNOW
NO RISK
METHOD
1. Download the attached KingRoot.zip file and save it on external storage
2. Turn off your phone, and boot into recovery (Volume Up+Home+Power)
3. Select 'apply update from zip'/'Install'
4. Locate and choose the KingRoot.zip and flash
Now Reboot and your Core 2 is rooted.​
Click to expand...
Click to collapse
Excuse me guys.
Where is kingroot.zip file attached?

[Root][TWRP] QMobile Z14 / Gionee S6 Pro / Blu Vivo 6 / Allview X3 Soul Plus

Flash at your own risk.
Click to expand...
Click to collapse
Custom Recovery​
Instructions:
1. First of all download the required files here.
BLU Vivo 6 users please download below attached Scatter File and use this instead of those available in zip.
2. Install all required drivers.
3. Extract All Zips.
4. Run the "SP Flash Tool" as admin (Right Click on the file and click on run as admin)
5. Select "Scatter Loader" from the provided zip, and check that only recovery must be selected.
6. Select "Download Only".
7. Power off the cell phone but don't attach with data cable at this stage.
8. Now click on "Download" and press volume down button and attach cell phone.
9. Wait till flash. You are done.
In case you got scatter file error download the ROM attached and flash it by selecting Firmware update in flash tool.
Root & Encryption Issue​
1. Download the Magisk Root files from here.
2. Copy the files in Memory card and not into Internal Storage
3. Boot into "Recovery" by 'Turning Off" the cell phone, now press "Volume Up" and press "Power Button", it will show three options, select "Recovery" by pressing ":Volume Up" and select it by pressing "Volume Down".
4. Swipe to allow modifications.
5. When you first boot into recovery it will ask you for the password, press "Cancel" button and install "Magisk Root", after that press "Wipe" and select "Factory Reset" and then "Wipe Data".
6. Now flash Magisk from memory card. You can select it from "select storage" button and select memory card. otherwise memory card will not be accessible from other menu.
7. Now reboot your cell phone.
8. Enjoy.
Gionee S6 Pro Stock ROM
Gionee S6 Pro Stock ROM
Click to expand...
Click to collapse
In Case You Messed Up
Z14 Pure Stock ROM.
Click to expand...
Click to collapse
Hit Like if it helped you.
Credits:
AlexZap​

qwerfaseeh said:
Coming Soon (May be at the end of this week, after some more tests)
Click to expand...
Click to collapse
plz help to root q mobile S 4

@Muzammil mushtaq
Recovery TWRP
Info how to flash
One time that recovery is enabeld copy in the device the ZIP file for recovery for SuperSU and busybox and install in this order (first SuperSU than busybox).
SuperSU 2.78SR1
Busybox ARM
@qwerfaseeh
Pelase add all infos in your first post.
I will post also a soon as the boot unlocked.

Muzammil mushtaq said:
plz help to root q mobile S 4
Click to expand...
Click to collapse
Dear as i don't have S4 so i am unable to test any root for you please dont follow this post this is not for S4 it's only for Z14 but i am searching for you and plz try Kingroot

qwerfaseeh said:
Dear as i don't have S4 so i am unable to test any root for you please dont follow this post this is not for S4 it's only for Z14 but i am searching for you and plz try Kingroot
Click to expand...
Click to collapse
king root not working bro

Sorry bro but in this case I am unable to help you

is there any chance we can flash gionee s6 pro rom on qmobile z14 ?
---------- Post added at 05:38 PM ---------- Previous post was at 05:28 PM ----------
bovirus said:
@Muzammil mushtaq
Recovery TWRP
Info how to flash
One time that recovery is enabeld copy in the device the ZIP file for recovery for SuperSU and busybox and install in this order (first SuperSU than busybox).
SuperSU 2.78SR1
Busybox ARM
@qwerfaseeh
Pelase add all infos in your first post.
I will post also a soon as the boot unlocked.
Click to expand...
Click to collapse
do we need to unlock boot loader first to flash custom recovery ???
if yes then how ?

@cool2cool
boot loader unlocked is not necessary to flash the recovery,.
boot unlocked enable more root option.

bovirus said:
@cool2cool
boot loader unlocked is not necessary to flash the recovery,.
boot unlocked enable more root option.
Click to expand...
Click to collapse
can we flash gionee s6 pro rom on this qmobile z14 ?

qwerfaseeh said:
Custom Recovery​
Instructions:
1. First of all download the required files here.
2. Install all required drivers.
3. Extract All Zips.
4. Run the "SP Flash Tool" as admin (Right Click on the file and click on run as admin)
5. Select "Scatter Loader" from the provided zip, and check that only recovery must be selected.
6. Select "Download Only".
7. Power off the cell phone but don't attach with data cable at this stage.
8. Now click on "Download" and press volume down button and attach cell phone.
9. Wait till flash. You are done.
Root & Encryption Issue​
1. Download the root files from here.
2. Boot into "Recovery" by 'Turn Off" the cell phone, now press "Volume Up" and press "Power Button", it will show three options, select "Recovery" by pressing ":Volume Up" and select it by pressing "Volume Down".
3. Swipe to allow modifications.
4. When you first boot into recovery it will ask you for the password, press "Cancel" button and install "Root", after that press "Wipe" and select "Factory Reset" and then "Wipe Data".
5. Now reboot your cell phone.
6. Enjoy.
Hit Like if it helped you.
Credits:
AlexZap, bovirus​
Click to expand...
Click to collapse
any one tried this method yet ??

bovirus said:
@cool2cool
boot loader unlocked is not necessary to flash the recovery,.
boot unlocked enable more root option.
Click to expand...
Click to collapse
i cant find drivers for z14. can anyone help.
mtp driver when usb debugging is enable

@cool2cool
The driver for Z14 are the standard USB ADB driver.

bovirus said:
@cool2cool
The driver for Z14 are the standard USB ADB driver.
Click to expand...
Click to collapse
when i plug my mobile on debugging mode its shows MTP as unknown device and is not accepting drivers any have tried google, universal, Samsung, htc, mtk. none of them r working.
don't know why all other mobiles are working perfectly on adb.
and the adb part is displaying under Samsung android phone

if i reboot into fastboot mode. that is not working aswell. same driver problem

its connecting normally when usb debugging is disabled

cool2cool said:
any one tried this method yet ??
Click to expand...
Click to collapse
I am using it and its working fine then i posted it on XDA

cool2cool said:
i cant find drivers for z14. can anyone help.
mtp driver when usb debugging is enable
Click to expand...
Click to collapse
Drivers are already added in cell phone just connect it to driver installation mode after connection with pc

cool2cool said:
if i reboot into fastboot mode. that is not working aswell. same driver problem
Click to expand...
Click to collapse
Install the drivers included in cell phone then restart pc after that connect cell phone then open device menu right click on it click on update driver then manually then click next then all devices then there will be two option select USB MTP Device and ok all done

qwerfaseeh said:
Install the drivers included in cell phone then restart pc after that connect cell phone then open device menu right click on it click on update driver then manually then click next then all devices then there will be two option select USB MTP Device and ok all done
Click to expand...
Click to collapse
still not working.
i will try this on another pc and report.
---------- Post added at 05:50 PM ---------- Previous post was at 05:48 PM ----------
qwerfaseeh said:
I am using it and its working fine then i posted it on XDA
Click to expand...
Click to collapse
ok.
as soon as i'll resolve the driver problem, i will try it as well.
one more question have you tried install gionee s6 pro official rom on qmobile Z14

cool2cool said:
still not working.
i will try this on another pc and report.
---------- Post added at 05:50 PM ---------- Previous post was at 05:48 PM ----------
ok.
as soon as i'll resolve the driver problem, i will try it as well.
one more question have you tried install gionee s6 pro official rom on qmobile Z14
Click to expand...
Click to collapse
No as i haven't found it on Internet and there is also a difference of internal storage as gionee is 64gb and z14 is 32gb

Axon 10 Pro charging only (P855A03)

Hi guys:
I hope you are doing good. I used Unjustified Dev's Tool to unlock my bootloader (I didn't a backup, beginner error), unfortunately everything ended wrong and the phone is still locked, buuuutttt... When it returned from fastboot it only accept the charge only option no MTP anymore. I have searched all over the threads of Axon 10 and tried with several Stock ROMs (chinese and EU) but no luck. The model is A2020G in theory, but it says P855A03 instead of P855A01 so any ROM fits and I finish with an error on recovery.
I just want the MTP function again to transfer files on USB. Any tutorial?
Kind regards!

So... After some research, the version is a US version (almost - P855A03 NA). Any ideas on how to restore the MTP? Maybe by flashing a file from boot.img or something? Thanks!

I'm having the same issue. Just got a new Axon 10 Pro US. Unlocked the bootloader using the EDL tool. After reboot the USB only connects in charge mode. Changing dev options to set the default to file transfer or MTP makes no difference. When I try to push files using adb I get a permission denied error.

jc717 said:
I'm having the same issue. Just got a new Axon 10 Pro US. Unlocked the bootloader using the EDL tool. After reboot the USB only connects in charge mode. Changing dev options to set the default to file transfer or MTP makes no difference. When I try to push files using adb I get a permission denied error.
Click to expand...
Click to collapse
Soooo... Finally fixed, but not with a method from XDA, I have downloaded the firmware version from easy-firmware... It was not my bet but now everything works again, if you need the firmware file please let me know, we are here to help each other and before the 6 month period passes.
Regards!

zparallax said:
Soooo... Finally fixed, but not with a method from XDA, I have downloaded the firmware version from easy-firmware... It was not my bet but now everything works again, if you need the firmware file please let me know, we are here to help each other and before the 6 month period passes.
Regards!
Click to expand...
Click to collapse
Thanks! Glad you solved it.
So you downloaded the firmware and EDL flashed it or did you use something else?
Was it the version for 2020U?

jc717 said:
Thanks! Glad you solved it.
So you downloaded the firmware and EDL flashed it or did you use something else?
Was it the version for 2020U?
Click to expand...
Click to collapse
Thanks, no, actually there is a SDCARD update at easy-firmware, you just put it on the sdcard, then reboot into recovery and select apply update from zip (I think that's the option) and then it flashes the firmware.
For 2020U I think is P855A03_NA, there are several files for each vendor (g.e. P855A03V1.0.0B12_DL.zip) not sure if any of those works for you, have you tried on the ZTE US site?, they have a SDCARD update from android 10, put it on your SDCARD and try flashing. If you have any doubts, please let me know.

zparallax said:
Thanks, no, actually there is a SDCARD update at easy-firmware, you just put it on the sdcard, then reboot into recovery and select apply update from zip (I think that's the option) and then it flashes the firmware.
For 2020U I think is P855A03_NA, there are several files for each vendor (g.e. P855A03V1.0.0B12_DL.zip) not sure if any of those works for you, have you tried on the ZTE US site?, they have a SDCARD update from android 10, put it on your SDCARD and try flashing. If you have any doubts, please let me know.
Click to expand...
Click to collapse
I don't want to loose bootloader unlock or twrp, so I don't want to move to 10. Thanks for the sd card suggestions. I'll give that a go.

In fact you will not loose the unlock, just TWRP. Do the following, go to about phone in settings and let me know the version number of your hardware, if I find it on easy-firmware I'll let you know.

zparallax said:
In fact you will not loose the unlock, just TWRP. Do the following, go to about phone in settings and let me know the version number of your hardware, if I find it on easy-firmware I'll let you know.
Click to expand...
Click to collapse
ZTE A2020U Pro.
Can I root the phone after flashing the firmware you're suggesting?

First of all... I think TWRP is not compatible with Android 10 so root is probably not possible. But I may be wrong. Second, the build number is not that but my guess is that maybe and just maybe this versions could work for you... 372400B1093GEN_NA_A2020U_PROV1.10(SD card software).zip
372400B1093GEN_NA_A2020U_PROV1.10.zip
They both are for Android 9 and only the update from ZTE USA is Android 10.
Maybe you could try with some of them.

Posting some more details in case someone with more knowledge about this stuff wants to help.
Phone is a brand new ZTE Axon 10 Pro a2020U with Android 9 on it. Just got it earlier today.
USB functionality worked as intended until I ran the bootloader unlock option in the EDL tools. Bootloader was unlocked successfully, but now all USB connect options besides 'charging only' are grayed out.
Tried different USB cables and ports. Same thing whether I boot into Linux or Windows. My old LG v20 works fine with the same cables and ports.
Changing the 'Default USB Configuration' option in Developer options has no effect.
When I boot into twrp the phone gets recognized by windows and I can copy files to it.
When booted fully it shows up in the system tray as SM8150-MTP, but isn't visible in widows explorer.
It responds to adb commands and I can adb shell into it. adb devices shows '? device'
I did a full backup using the edl tools before getting started. Strangely, restoring the backup does not fix the issue.
Any ideas?

you can put *#*#33284#*#* into the phone dialing interface,and then choose the second one.you will see the manufacturer clear button.choose it and confirm,you will find that your mtp return to normal.
I had the same problem ,but i found that after bootloader unlocked the diag port was opened unsuspected.
I recently lost my imei for format some partitions in the phone.If anyone knows how to fix axon 10 G pro imei lost problem.Please help me.

Hi, thanks for the tip... Actually I didn't knew that one, hopefully it will fix the MTP problem. If it doesn't work you can send me a message. If you can take a screenshot of the about phone info it could be great just in case. For the IMEI problem... Have you tried dialing *#06#?

zparallax said:
Hi, thanks for the tip... Actually I didn't knew that one, hopefully it will fix the MTP problem. If it doesn't work you can send me a message. If you can take a screenshot of the about phone info it could be great just in case. For the IMEI problem... Have you tried dialing *#06#?
Click to expand...
Click to collapse
yes，i tried.it shows that IMEI1 000039485642710 IMEI and MEID unknown.When i use qpst to look into the qcn file which backed up from my phone.It turns out that esn 0x0000000.I should have give you some screenshot detiles,but I'm sorry that it don't know how to add a picture to my reply.I'm a chinese and i rarely used http image links.
I had contact zte comstum service department and got a reply that asked me for rooted and flashed the phone or not.
On your problem,MTP doesn't works properly because of unlocking device changes files on the phone,then manufacture mode turned on automaticly instead of MTP mode.you can only choose one usb mode at one time.Maybe some developers can add some code and turn off this function.

deleted

meow sir said:
bạn có thể đặt * # * # 33284 # * # * vào giao diện quay số điện thoại, sau đó chọn giao diện thứ hai. bạn sẽ thấy nút xóa của nhà sản xuất. chọn nó và xác nhận, bạn sẽ thấy rằng MTp của bạn trở lại bình thường.
Tôi đã gặp vấn đề tương tự, nhưng tôi thấy rằng sau khi bộ nạp khởi động mở khóa, cổng chẩn đoán đã được mở không đáng ngờ.
Gần đây tôi đã bị mất imei để định dạng một số phân vùng trong điện thoại, nếu có ai biết cách khắc phục sự cố mất imei của axon 10 G pro. Vui lòng giúp tôi.
Click to expand...
Click to collapse
I cannot use this code after upgrading to Android 10
Do you have a similar situation?

Ngoctv said:
Tôi không thể sử dụng mã này sau khi nâng cấp lên Android 10
Bạn có gặp trường hợp tương tự không?
Click to expand...
Click to collapse
I cannot use this code after upgrading to Android 10
Do you have a similar situation?

[Guide - HOW TO] Recover LG G7 (or other newer LG phones) from EDL or 9008 mode.

****** Unbrick all LG G7 models ******
********** This guide has updated into two methods ********** ​
(i). Recover from any boot problem to system or download mode.(which is defined below)
This technique have been very useful to me for fixing my device and there is no any particular guide to fix brick device easily. That's why it is a must to share.
* As long as you can access EDL(9008) mode in your device you can fix your bricked device *
There are so many developers online if you can find who claim to fix or unbrick your bricked device by charging a hefty amount even after that you can not trust them.
****** I am here just to help you so if you want you can donate to me on paypal ******​
This guide has been compiled to fix all the phones which are in bricked state and completely dead state as long as you can access EDL mode(which is a Qualcomm's hidden flashing mode bult into hardware) you are able to fix your phones.
This guide applies to all the following problems :
Boot loop.
Fastboot boot loop(looping in fastboot).
Stuck at LG logo.
No recovery mode.
No fastboot mode.
Red triangle(security error).
"Press key to shut" message displays.
Seems like No sign of life.
And when connects to PC :
QHSUSB BULK or QLOADER or something like that when connects to PC or red LED.
Why are you facing this problem??
Downgrading android version of your phone.
Flashing wrong recovery image.
Flashing wrong firmware/ROM.
Flashing wrong bootloader/fastboot image.
While playing with your phone just for fun.
And many more....
Tools required :
- Qualcomm USB drivers. https://mega.nz/file/YAVhFIiC#nF-cChZklhcsxMHk24GhsB6rlE119erQqmXuBu21c6c
- LG mobile drivers. https://mega.nz/file/4UU3RSJb#iJu32uFbPsSrhIPoVr-BS1f2RqHnqL95lePDhDnK7NY
- LGUP tool lab version and LGUP common dll. https://mega.nz/file/MJdjxCqb#THo7EpmCqFUNa5VHMQcWI5D6M4QcR5p2vhQ77le0Gzo
- LG V35 abl image. https://mega.nz/file/wBV3UaQK#G0bF9gYz9Jb8FjdJsCAP0wmIOSqHrOFUjvUiPOsj91Q
- LG firmware extractor. https://mega.nz/file/oZMzGS6Q#JmYlsH9YgU_CmR5Ra0gjIOg_4S6fNVFPgl3UV0BRz0s
- KDZ tools. https://mega.nz/file/hJNVWAyY#KL8dypxmDXOJ3I9njzQW2TYE-ZgrHaiwnmenNbBcGRs
- QFIL tool. https://mega.nz/file/4AdjXCAS#tWf6XUYO3OxHjZ_XDJZopOtQpVkggW2170QIKDW0JK8
- Snapdragon 845 UFS firehose. https://mega.nz/file/8Zk0AAJQ#-WBO38OBXo6TnykCoOaoXeV2zBxHaUyoq3sR6lmFTtQ
- ADB tool. https://mega.nz/file/URtWmAxZ#TRNwkp9ZQw4BG1we2cxu623fT-6O6XJsBcylNevSF0g
- Stock f/w KDZ for your particuar device no less than last working andriod and build version.
- Knowledge how to boot into EDL (without shorting test pin it can fuse device board).
* Steps :
Step 1 : uninstall all the phone related drivers and restart PC.
Step 2 : to successfully install drivers and software follow below guide -
a. open commant prompt with admin rights run these commands so windows can allow to install driver properly.
- bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
- bcdedit.exe -set TESTSIGNING ON
(these will disable driver signature enforcement and put windows into test mode)
and restart
c. install Qualcomm drivers
d. install LG mobile drivers
e. install QPST
f. install LGUP lab version and place LGUP_Common.dll in C:\Program Files (x86)\LG Electronics\LGUP\model\common\LGUP_Common.dll and restart PC
*** When you boot your phone in download mode and instead it goes into fastboot then you should first open LGUP and then connect phone in download mode because I as experienced this time somehow LGUP forces the phone to stay in download mode rather than switching to fastboot ***
(if thuis works proceed to step 9 else not then step 3)
Step 3 : open LG firmware extract and click open in KDZ row and select downloaded firmware kdz and let it load then check G710xx something from list and click extract if there is any error in log then your kdz file is corrupted, if success then it will produce a DZ file and now in DZ row click open and select DZ file now tool will show you a long list, now select all the items and extract. This will produce so many files in LG firmware extractor folder.
Step 4 : place your kdz file in KDZ tools folder and select OneKeyExtraction.bat type Y, it will produce a dz file and several img files in a folder named as your firmware KDZ's name. copy boot_a.img , abl_a.img , laf_a.img to adb folder for fastboot flashing.
Step 5 : open QFIL from it's installation location and check build type to flat build and in programm file select prog_ufs_firehose_Sdm845_lge.elf file and in lower right corner select storage type to UFS.
Step 6 : connect your device to PC and boot into EDL mode by
a. if it is in any ON condition : POWER button + VOLUME DOWN and prepare to press VOLUME UP repeatedly as soon as phone switches off
b. if it is in dead condition : connecting to PC automatically boot into EDL mode.
if phone is connected in EDL mode now Device manager must show a device under ports tree somehting named as Qualcom HS-USB QLOADER 9008(Com_X)
* if you have bricked your device then I assume you already know how to boot into EDL mode.
Step 7 : now in QFIL select port and select your device, select Tools from QFIL toolbar and select Partition Manger, in warning window ckick OK if you've selected right 845's firehose elf file and after success it must show a list of many partions of your phone.
flashing : it's time for flashing.
*Note: select all the image files one by one in Lg firmware extract folder by typing name in file name control like as showed in screenshot Files_location.jpg.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it will take patience because it's a manual one, order must be followed coz tha's the thing that matters...
- find select and right click on "xbl_a" then manage partition data and select load then select "xbl.elf_6"
- find select and right click on "xbl_config_a" then manage partition data and select load then select "xbl_config.ebl_902"
- find select and right click on "xbl_b" then manage partition data and select load then select "xbl.elf_6"
- find select and right click on "xbl_config_b" then manage partition data and select load then select "xbl_config.ebl_902"
- find select and right click on "tz_a" then manage partition data and select load then select "tz.mbn_134"
- find select and right click on "hyp_a" then manage partition data and select load then select "hyp.mbn_646"
- find select and right click on "boot_a" then manage partition data and select load then select "boot.img_163830"
- find select and right click on "cmnlib_a" then manage partition data and select load then select "cmnlib.mbn_81670"
- find select and right click on "cmnlib64_a" then manage partition data and select load then select "cmnlib64.mbn_81798"
- find select and right click on "boot_b" then manage partition data and select load then select "boot.img_163830"
- find select and right click on "cmnlib_b" then manage partition data and select load then select "cmnlib.mbn_81670"
- find select and right click on "cmnlib64_b" then manage partition data and select load then select "cmnlib64.mbn_81798"
- find select and right click on "abl_a" then manage partition data and select load then select "V35abl.img"
- find select and right click on "abl_b" then manage partition data and select load then select "V35abl.img"
- find select and right click on "raw_Resources_a" then manage partition data and select load then select "raw_resources.img_194918"
- find select and right click on "tz_b" then manage partition data and select load then select "tz.mbn_134"
- find select and right click on "hyp_b" then manage partition data and select load then select "hyp.mbn_646"
- find select and right click on "laf_a" then manage partition data and select load then select "laf.img_81990"
- find select and right click on "laf_b" then manage partition data and select load then select "laf.img_81990"
close partition manager and let it restart device into EDL again.
Step 8 : boot your device in fasboot which is currently in EDL mode, to do so press Power + Volume down button and ready to leave Power as soon as phone restart while keep pressing Volume down
a. open command prompt in adb folder and verify device connectivity by
fastboot devices
* it must show a device something like LMV35EAWx.
b. perform these commands, order must be followed coz tha's the thing that matters:
fastboot erase boot
fastboot erase boot_a
fastboot erase boot_b
fastboot erase abl
fastboot erase abl_a
fastboot erase abl_b
fastboot erase laf
fastboot erase laf_a
fastboot erase laf_b
fastboot flash boot boot_a.img
fastboot flash boot_b boot_a.img
fastboot flash boot_a boot_a.img
fastboot flash abl abl_a.img
fastboot flash abl_b abl_a.img
fastboot flash abl_a abl_a.img
fastboot flash laf laf_a.img
fastboot flash laf_b laf_a.img
fastboot flash laf_a laf_a.img
and let your device as it is in fastboot.
we already flashed these partions in EDL mode and flashing in fastboot confirms that partitions do not get overwritten.
Step 9 : open LGUP and somehow proceed to flashing window, where you'll find device list option and many flashing options and a firmware list below, in flashing options select Refurbish and drop your KDZ file in firmware list and follow
a. now from phone's fastboot menu select restart and hold Volume Up now phone will show download mode bar and in few seconds LGUP will recognise your device in list same as above screenshot.
b. flash you KDZ and let your device boot into system.
Now you have a fully working device.
(ii). Recover from dead boot or no partitions list in QFIL partition manager.(hard brick)
I worked around G7's stock kdz and fortunately end up generating flashing file for a single partition but there are so many(100+) partitions and this single one took 1+ hour, which was hardly to arrange. You can imagine how much time 100+ partitions would take to be prepared.
Problem is I have a time consuming job so I can not waste my time on this unless you donate some money and get your device guaranteed recovered ASAP.
** UPDATE **
The guide I was working on, was more complex for noob to understand.
be patience I am slowly working with python scripts and a easy guide which will help you to flash empty device.
***use rawprogram and patch at your risk because it will result in 0 IMEI problem that causes no network signal but your device will be fixed***
And if anyone want to flash firmware through QFIL in that case I am also attaching G710EAW partition.xml , rawprograms.xml, patch.xml and flashable gpt_main & gpt_backup bin.
24.9 KB file on MEGA
mega.nz
Thanks for your support.
Questions are welcome.
Pay Sourabh Kumar using PayPal.Me
Go to paypal.me/SKumar7625 and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries.
paypal.me
THANKS SO MUCH

Really good guide indeed, saved me from a hard brick a couple of months ago trying to unlock the bootloader.
Thanks for sharing!

isaac.caudillo said:
Really good guide indeed, saved me from a hard brick a couple of months ago trying to unlock the bootloader.
Thanks for sharing!
Click to expand...
Click to collapse
I am glad it worked for you.

Please, help me. My LG got Red Case, can not enter edl mode or download mode. What shouold i do?

yasir.asf said:
Please, help me. My LG got Red Case, can not enter edl mode or download mode. What shouold i do?
Click to expand...
Click to collapse
As far as I know Red Case is mostly a result of messing with your phone through EDL.
I have already explained how to boot in EDL :
(i). POWER button + VOLUME DOWN and prepare to press VOLUME UP repeatedly as soon as phone switches off
once your device connected in EDL mode Device manager must show a device under ports tree something named as Qualcom HS-USB QLOADER 9008(Com_X)

Hi! I'm from Cost Rica (G710EM20a)
Can you help me? I did all the steps and my phone stays on the logo and erasing ring.
I don't know what else to do...

sourabh7625 said:
As far as I know Red Case is mostly a result of messing with your phone through EDL.
I have already explained how to boot in EDL :
(i). POWER button + VOLUME DOWN and prepare to press repeatedly VOLUME UP as soon as phone switches off
once your device connected in EDL mode Device manager must show a device under ports tree something named as Qualcom HS-USB QLOADER 9008(Com_X)
Click to expand...
Click to collapse
Yeah I know, i read full the guide.
I can't enter EDL mode, but finally my phone turns on by flashing stock boot.img in fastboot mode.

Is there any possibility that you can restore partitions? As my device has nothing to select in Edl mode so I cannot restore it, meaning nothing is in the partition data but I do have full access to edl..

Xellas17 said:
Hi! I'm from Cost Rica (G710EM20a)
Can you help me? I did all the steps and my phone stays on the logo and erasing ring.
I don't know what else to do...
Click to expand...
Click to collapse
I am aware about this kinda bootloop, probably it's a result of flashing either different firmware or an older firmware and perhaps disconnecting or exit LGUP before letting the phone goes into system completely.
I suggest you to try flashing latest firmware available for your device through LGUP(select refurbish) and let it boot into system successfully and wait about 3-5 minutes to let LGUP finalizing flashing before disconnecting phone or exit LGUP.

yasir.asf said:
Yeah I know, i read full the guide.
I can't enter EDL mode, but finally my phone turns on by flashing stock boot.img in fastboot mode.
Click to expand...
Click to collapse
As I said if you bricked your phone you must have known how to connect in EDL mode(apart from EDL mode it's really hard to brick 845 phone).
well if you can flash through fastboot then flash fastboot section from step8 and then open LGUP first only after that connect phone in download mode, now it should be in list.
* When you boot your phone in download mode and instead it goes into fastboot then you should first open LGUP and then connect phone in download mode because I as experienced this time somehow LGUP forces the phone to stay in download mode rather than switching to fastboot.

Mr.Conkel said:
Is there any possibility that you can restore partitions? As my device has nothing to select in Edl mode so I cannot restore it, meaning nothing is in the partition data but I do have full access to edl..
Click to expand...
Click to collapse
Perhaps your device have a corrupt PrimaryGPT(which is a some kind of partitions table list container and it is absent in LG G7 firmware kdz)
Qfil rely on data read from device in partition manager but "flat and meta build" option is still there which forces the device to flash partitions regarding the information in rawprogram.xml and patch.xml files.
Unfortunately I don't have these files but I'll update you for an alternative solution.

sourabh7625 said:
Perhaps your device have a corrupt PrimaryGPT(which is a some kind of partitions table list container and it is absent in LG G7 firmware kdz)
Qfil rely on data read from device in partition manager but "flat and meta build" option is still there which forces the device to flash partitions regarding the information in rawprogram.xml and patch.xml files.
Unfortunately I don't have these files but I'll update you for an alternative solution.
Click to expand...
Click to collapse
Well I seen this forum looking for answer but this is not my particular device however I will explain . I have an Lg G8x ThinQ and when we got root I was naive and had accidentally clicked erase entire flash thinking it would just erase the partition data of the one I had selected. This was not the case and it completely erased it leaving me with a blank slate with no download or even a charge screen it is basically dead unless plugged into a pc in which it will boot straight into Edl. I am not expecting your full support but I do have a device backup that I know will work with the device problem being I can't restore it because there's nothing to select! Normally I would restore the partitions one by one as you do but this is not possible since they seem to have been erased in this state. If you have any information on QFIL that would be greatly appreciated I know we're not working on the exact same device but the process is much of the same.
Cheers!

Mr.Conkel said:
Well I seen this forum looking for answer but this is not my particular device however I will explain . I have an Lg G8x ThinQ and when we got root I was naive and had accidentally clicked erase entire flash thinking it would just erase the partition data of the one I had selected. This was not the case and it completely erased it leaving me with a blank slate with no download or even a charge screen it is basically dead unless plugged into a pc in which it will boot straight into Edl. I am not expecting your full support but I do have a device backup that I know will work with the device problem being I can't restore it because there's nothing to select! Normally I would restore the partitions one by one as you do but this is not possible since they seem to have been erased in this state. If you have any information on QFIL that would be greatly appreciated I know we're not working on the exact same device but the process is much of the same.
Cheers!
Click to expand...
Click to collapse
Alright now we know what's the problem. Best I am suggesting you to search for how to generate partition xml rawprogram xml and patch xml (or you can easily generate latter two from former one) for any newer lg device i.e. G7,V35,V40,G8s,G8X,V50 method for using any of these will work.
I am working on finding universal solution to problem.

[QUOTE = "sourabh7625, bài: 84338561, thành viên: 5955016"]
Được rồi, bây giờ chúng tôi biết vấn đề là gì. Tốt nhất tôi khuyên bạn nên tìm kiếm cách tạo phân vùng xml rawprogram xml và patch xml (hoặc bạn có thể dễ dàng tạo hai thứ sau từ cái cũ) cho bất kỳ thiết bị lg nào mới hơn, tức là phương pháp G7, V35, V40, G8s, G8X, V50 để sử dụng bất kỳ cái nào trong số này sẽ hoạt động.
Tôi đang nghiên cứu để tìm ra giải pháp chung cho vấn đề.
[/TRÍCH DẪN]
Tôi cũng đã gặp phải vấn đề tương tự và đang hy vọng có cách giải quyết. Tôi sử dụng g7

[QUOTE = "kyon007, bài đăng: 84341753, thành viên: 11250663"]
[QUOTE = "sourabh7625, bài: 84338561, thành viên: 5955016"]
Được rồi, bây giờ chúng tôi biết vấn đề là gì. Tốt nhất tôi đề nghị bạn nên tìm kiếm cách tạo phân vùng xml rawprogram xml và patch xml (hoặc bạn có thể dễ dàng tạo thứ hai sau cái cũ) cho bất kỳ lg thiết bị nào mới hơn, tức là G7, V35 phương pháp , V40, G8s, G8X, V50 để sử dụng bất kỳ cái nào trong số này sẽ hoạt động.
Tôi đang nghiên cứu để tìm ra giải pháp chung cho các vấn đề.
[/ TRÍCH DẪN]
Tôi cũng gặp phải vấn đề tương tự và tôi hy vọng có cách giải quyết. Tôi sử dụng g7
[/TRÍCH DẪN]

kyon007 said:
[QUOTE = "kyon007, bài đăng: 84341753, thành viên: 11250663"]
[QUOTE = "sourabh7625, bài: 84338561, thành viên: 5955016"]
Được rồi, bây giờ chúng tôi biết vấn đề là gì. Tốt nhất tôi đề nghị bạn nên tìm kiếm cách tạo phân vùng xml rawprogram xml và patch xml (hoặc bạn có thể dễ dàng tạo thứ hai sau cái cũ) cho bất kỳ lg thiết bị nào mới hơn, tức là G7, V35 phương pháp , V40, G8s, G8X, V50 để sử dụng bất kỳ cái nào trong số này sẽ hoạt động.
Tôi đang nghiên cứu để tìm ra giải pháp chung cho các vấn đề.
[/ TRÍCH DẪN]
Tôi cũng gặp phải vấn đề tương tự và tôi hy vọng có cách giải quyết. Tôi sử dụng g7
[/TRÍCH DẪN]
Click to expand...
Click to collapse
from the first image, click save partition file and share here that generated xml.
also share rawprogram xml you are using.

[QUOTE = "sourabh7625, bài đăng: 84344379, thành viên: 5955016"]
từ hình ảnh đầu tiên, nhấp vào lưu tệp phân vùng và chia sẻ tại đây xml đã tạo.
cũng chia sẻ rawprogram xml mà bạn đang sử dụng.
[/TRÍCH DẪN]
Tôi sử dụng file from dzextracted
[URL opensurl = "true"] https://forum.xda-developers.com/t/...rdbrick-or-red-case-in-9008-mode-without-any- hộp.4052841 / [/ URL]

kyon007 said:
[QUOTE = "sourabh7625, bài đăng: 84344379, thành viên: 5955016"]
từ hình ảnh đầu tiên, nhấp vào lưu tệp phân vùng và chia sẻ tại đây xml đã tạo.
cũng chia sẻ rawprogram xml mà bạn đang sử dụng.
[/TRÍCH DẪN]
Tôi sử dụng file from dzextracted
[URL opensurl = "true"] https://forum.xda-developers.com/t/...rdbrick-or-red-case-in-9008-mode-without-any- hộp.4052841 / [/ URL]
Click to expand...
Click to collapse
As I thought your phone have a blank storage ufs like a new HDD which does not have any physical partitions. physical partitions must be made first before anything.
Currently I can offer only stock original partition0.xml for LG G7, which is a physical partitions table. if you can use any other tool to make partitions through it, let me know..
If you can use english that will be time saving for other members and might also help you.

sourabh7625 said:
As I thought your phone have a blank storage ufs like a new HDD which does not have any physical partitions. physical partitions must be made first before anything.
Currently I can offer only stock original partition0.xml for LG G7, which is a physical partitions table. if you can use any other tool to make partitions through it, let me know..
If you can use english that will be time saving for other members and might also help you.
Click to expand...
Click to collapse
can you give me your misc partition file
I want to try some things

kyon007 said:
can you give me your misc partition file
I want to try some things
Click to expand...
Click to collapse
you can get misc image file from stock kdz of your device model using lg firmware extractor.