stuck in huawei logo - Honor 4C Questions & Answers

Hello
I have a Huawei CHC-U01
The problem
I Unlock Bootloader
I unzipped update.app for b503 MM through huawei update extractor
and flash boot, cust, recovery, system, userdata via fastboot
now the device stuck in huawei logo and i cannot enter recovery mode
and force update ( Volume+ AND Volume- AND Power ) dosenot work

DO IT AGAIN..
but this time do boot,system,data and recovery(do not flash cust).. and if it fails too, flash only recovery and do a dload flash(i presume that you know the procedure, ping me if not)..

killhous529 said:
Hello
I have a Huawei CHC-U01
The problem
I Unlock Bootloader
I unzipped update.app for b503 MM through huawei update extractor
and flash boot, cust, recovery, system, userdata via fastboot
now the device stuck in huawei logo and i cannot enter recovery mode
and force update ( Volume+ AND Volume- AND Power ) dosenot work
Click to expand...
Click to collapse
Have you solved the problem?
Do you have twrp installed?
if yes then follow this guide
https://forum.xda-developers.com/honor-4c/how-to/installing-p8lite-roms-honor-4c-t3617942

Related

HONOR 6 Plus PE-TL10 - Brick

After no successful firmware honor+ PE-TL10 does not start when you turn on a few seconds hangs on Android logo, then goes out and some times the indicator flashes red and green, firmware method three buttons does not start.
In recovery is not included in the mode bootloader.
Bootloader is locked. What to do?
andrei1269 said:
After no successful firmware honor+ PE-TL10 does not start when you turn on a few seconds hangs on Android logo, then goes out and some times the indicator flashes red and green, firmware method three buttons does not start.
In recovery is not included in the mode bootloader.
Bootloader is locked. What to do?
Click to expand...
Click to collapse
I have the same issue. Did you ever find a solution?
Fix for this issue
Hi! I have the same problem and i fix it.
How to?
1. U need to unclock bootloader first
2. Downolad software 4.4.2 hihonor.com/pl/support/software-list/index.htm and put UPDATE.app file in scdard dload folder
3. Extract recovery.img boot.img cust.img system.img with Huawei Update Extractor (put them to the adb folder)
4. Enter to fastboot mode (vol - and plug the usb cable)
5. Flash via fastboot with command:
- flash fastboot recovery RECOVERY.img
- flash fastboot boot BOOT.img
- flash fastboot cust CUST.img
- flash fastboot system SYSTEM.img
6. Unplug cable and click vol+, vol- and power and Keep far until the update process will begin
7. If process crash shut down system
8. Click vol+ and power and hold
9. In emui recovery do wipe data/factory reset and wipe cache
10. Reboot system and phone will stats.
Sorry for my english but i want to help
you can even simply flash that update.app ,
comand not alowed

BRICK on HONOR 6(H60-L04), can't flashing ROMs

Following this thread http://forum.xda-developers.com/android/general/guide-workaround-running-xposed-t3338765 I accidentally deleted from /sys app, framework and priv-app folders, the device stopped immediatly and I only could boot in recovery(TWRP). I go on following the thread but at the end I was stuck in bootloop. Following the suggestion of mfbcool and other users i tried to unbrick the device but nothing worked: when I tried to reboot from TWRP it said "No OS Installed". If i try to flash from TWRP it fail, doing the update, after flashing the stock recovery, with the three buttons combination it stops at 5%.
As mentioned above the device is a Honor 6 H60-L04 which mounted android M(the official beta version).
Ok now we try somthing difftrent
Did you ever did a backup via TWRP ? you can restore now?
Else...
Download ADB/FASTBOOT (attachment)
In this zip is also Huawei Update Extractor
Download B550 Firmware (e.g. https://mega.nz/#!DB4R3YjT!Fp3JDf1WwmiyNX7mYD_Rftu0BDtXnorNaggOqpRouZU )
Extract via Huawei Update Extractor recovery.img, boot.img and put them in ADB folder
Reboot your device in recovery
Wipe all (dalvik /art cache, cache, cust, system, data, boot, internal memory)
Connect your device with your computer
Open ADB and type "adb devices"
Is your device listed? If not, download the right driver
If yes, type "adb reboot bootloader"
"fastboot flash boot boot.img"
"fastboot flash recovery recovery.img"
Now reboot your device into recovery.
If you see the orginal recovery put the update.app on your sd card in dload folder an reboot your phone with the three button methode.
Now the update should start. It will take about 5-10 min.
RangerP7 said:
Ok now we try somthing difftrent
Did you ever did a backup via TWRP ? you can restore now?
Else...
Download ADB/FASTBOOT (attachment)
In this zip is also Huawei Update Extractor
Download B550 Firmware (e.g. https://mega.nz/#!DB4R3YjT!Fp3JDf1WwmiyNX7mYD_Rftu0BDtXnorNaggOqpRouZU )
Extract via Huawei Update Extractor recovery.img, boot.img and put them in ADB folder
Reboot your device in recovery
Wipe all (dalvik /art cache, cache, cust, system, data, boot, internal memory)
Connect your device with your computer
Open ADB and type "adb devices"
Is your device listed? If not, download the right driver
If yes, type "adb reboot bootloader"
"fastboot flash boot boot.img"
"fastboot flash recovery recovery.img"
Now reboot your device into recovery.
If you see the orginal recovery put the update.app on your sd card in dload folder an reboot your phone with the three button methode.
Now the update should start. It will take about 5-10 min.
Click to expand...
Click to collapse
i've never made a backup, i know it would solve this problem...
i did everything you wrote, but when i was trying to reboot in recovery the device showed me the screen "HONOR(with the red <h>) powered by android"
sl97 said:
i've never made a backup, i know it would solve this problem...
i did everything you wrote, but when i was trying to reboot in recovery the device showed me the screen "HONOR(with the red <h>) powered by android"
Click to expand...
Click to collapse
i've already tried to flash other version of recovery, but the only two version that work are TWRP for EMUI 4.0 and the Stock of B803
Download the ROM you were on before all this happened. It's compulsory you're downloading the ROM you were on to avoid any compatibility errors.
Make sure you have installed Huawei HiSuite.
Extract boot.img , system.img , cust.img and recovery.img from the ROM you downloaded using Huawei Update Extractor.
Move all the extracted .img to the Fastboot/ADB folder (folder where fastboot.exe or adb.exe is installed)
While your device is powered off, hold volume down button and plug your device to computer. Your device will boot to Fastboot Mode.
Enter the following commands one by one:
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot flash recovery.img
After all commands have been executed, unplug your device from computer and hold Volume Up button. Your device will boot to Huawei's eRecovery (2nd Recovery).
Shutdown your device via the eRecovery.
Now hold Volume Up and Power button. As soon as you see Honor logo, leave the power button but continue to hold Volume Up button. Your device will now boot to recovery.
Perform a Factory Reset via the recovery.
Now reboot your device.
Done!!!
mfbcool said:
Download the ROM you were on before all this happened. It's compulsory you're downloading the ROM you were on to avoid any compatibility errors.
Make sure you have installed Huawei HiSuite.
Extract boot.img , system.img , cust.img and recovery.img from the ROM you downloaded using Huawei Update Extractor.
Move all the extracted .img to the Fastboot/ADB folder (folder where fastboot.exe or adb.exe is installed)
While your device is powered off, hold volume down button and plug your device to computer. Your device will boot to Fastboot Mode.
Enter the following commands one by one:
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
fastboot flash recovery.img
After all commands have been executed, unplug your device from computer and hold Volume Up button. Your device will boot to Huawei's eRecovery (2nd Recovery).
Shutdown your device via the eRecovery.
Now hold Volume Up and Power button. As soon as you see Honor logo, leave the power button but continue to hold Volume Up button. Your device will now boot to recovery.
Perform a Factory Reset via the recovery.
Now reboot your device.
Done!!!
Click to expand...
Click to collapse
the problem is that i had android m beta update(B803) and i don't know where to find the full ROM. i have the update but cust and system are not ".img" but they are folders. i don't know how to flash them...
this is the link of the files i use https://drive.google.com/folderview?id=0B9EKeqAx6XkfRGdTVjlJQ1VyLUk#
sl97 said:
the problem is that i had android m beta update(B803) and i don't know where to find the full ROM. i have the update but cust and system are not ".img" but they are folders. i don't know how to flash them...
this is the link of the files i use https://drive.google.com/folderview?id=0B9EKeqAx6XkfRGdTVjlJQ1VyLUk#
Click to expand...
Click to collapse
Alright. That's the problem. You don't have the full ROM yet and the file you gave is an OTA zip. It's never gonna work.
But try my method again but this time with a Lollipop ROM EMUI 3.1 which you were having before Marshmallow.
mfbcool said:
Alright. That's the problem. You don't have the full ROM yet and the file you gave is an OTA zip. It's never gonna work.
But try my method again but this time with a Lollipop ROM EMUI 3.1 which you were having before Marshmallow.
Click to expand...
Click to collapse
i'm trying your method but i cannot boot into eRecovery. i unplug the device and keep pressed the vol + but nothing happened, it stay in fastboot mode
sl97 said:
i'm trying your method but i cannot boot into eRecovery. i unplug the device and keep pressed the vol + but nothing happened, it stay in fastboot mode
Click to expand...
Click to collapse
Then, just restart your device, boot to stock recovery, factory reset and again reboot.
mfbcool said:
Then, just restart your device, boot to stock recovery, factory reset and again reboot.
Click to expand...
Click to collapse
i cannot boot in recovery. the device vibrates but then shows me the logo screen.
the only recovery which works is for emui 4.0...
it seems that i need or a backup of someone of the same firmware in TWRP or the full ROM of the B803 update...
sl97 said:
i cannot boot in recovery. the device vibrates but then shows me the logo screen.
the only recovery which works is for emui 4.0...
it seems that i need or a backup of someone of the same firmware in TWRP or the full ROM of the B803 update...
Click to expand...
Click to collapse
Then use EMUI 4.0 recovery to factory reset the phone but use Android 5.1.1 ROM for system.img, cust.img and boot.img.
mfbcool said:
Then use EMUI 4.0 recovery to factory reset the phone but use Android 5.1.1 ROM for system.img, cust.img and boot.img.
Click to expand...
Click to collapse
while wiping fro factory reset it comes to 17% than stops showing a red exclamation mark in the middle of the circle
sl97 said:
while wiping fro factory reset it comes to 17% than stops showing a red exclamation mark in the middle of the circle
Click to expand...
Click to collapse
Try this using fastboot
Code:
fastboot erase cache
fastboot erase userdata
mfbcool said:
Try this using fastboot
Code:
fastboot erase cache
fastboot erase userdata
Click to expand...
Click to collapse
I was trying to restore a backup i found in another thread for TWRP and B804 and incredibly it work!! http://forum.xda-developers.com/honor-6/general/help-honor-6-bricked-b805-t3315247 here there are also other backups, in your opinion i should restore that B803 or is better to leave so?!
sl97 said:
I was trying to restore a backup i found in another thread for TWRP and B804 and incredibly it work!! http://forum.xda-developers.com/honor-6/general/help-honor-6-bricked-b805-t3315247 here there are also other backups, in your opinion i should restore that B803 or is better to leave so?!
Click to expand...
Click to collapse
Fine!
I would go back to LP and clear install MM. So you could be sure you have a new and clear ROM installed.
Ok! Thank you very much!
Sent from my H60-L04 using XDA-Developers mobile app
i couldnot flash stock recovery because of the fail command not alowed,
thalaraj1992 said:
i couldnot flash stock recovery because of the fail command not alowed,
Click to expand...
Click to collapse
Is your bootloader unlocked?
my bootboader show "phone unlocked"
What are you typing?
"fastboot flash recovery recovery.img"
Is your recovery.img in the ADB / FASTBOOT folder?

NTX-L29C432B180-FULL OTA update not possible...

Hallo everybody.
Summarizing: with a new, clear Huawei Mate 8 (HUAWEI NXT-L29) I unlocked the bootloader (default Huawei procedure).
I rooted the smartphone using SuperSU and all's perfect - my apps require and gain root permissions.
No, a new OTA upload comes into being.
I try to install: the smartphone reboots and remains stuck on "Your device has been unlocked and can't be trusted" or whatever...
I try to "fastboot oem lock ******" (the code I obtained unlocking), but it tells me "FAILED (remote: root type is risk)".
I try to reflash the stock ROM (to do a hard reset), either by the "dload" or the "*#*#2846579#*#*" method: it stays stuck on "Your device has been unlocked and can't be trusted" or whatever...
Any advice? Where am I wrong? And what to do next to update the ROM?
Thank you!
Any suggestion? Come on, guys, you're the best...
First thing to flash OTA - stock recovery. Flash it from fast boot and try again.
Can you tell me step by step? And where to download files?
Download your Firmware frome here
http://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
Unpack it.
Download Huawei Extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Open Huawei Ectract and open the UPDATE.APP from your unpacked Update.zip and extract the RECOVERY.img
Reboot into Bootloader
Flash the Recovery.img via Fastboot (fastboot flash recovery RECOVERY.img)
Reboot
You on Stock Recovery and can install the Updates from the first Link
Too much kind! I'll let you know...
Thank you!
letschky said:
Download your Firmware frome here
http://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
Unpack it.
Download Huawei Extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Open Huawei Ectract and open the UPDATE.APP from your unpacked Update.zip and extract the RECOVERY.img
Reboot into Bootloader
Flash the Recovery.img via Fastboot (fastboot flash recovery RECOVERY.img)
Reboot
You on Stock Recovery and can install the Updates from the first Link
Click to expand...
Click to collapse
I'm sorry, your way doesn't work.
The RECOVERY.img is flashed good, but when I try to install the UPDATE.APP, it remains stuck on "Your device has been unlocked and can't be trusted".
this is normal with unlocked Bootloader.
You can extract SYSTEM.img,CUST.img,BOOT.img and flash via Fastboot
Reboot into Bootloader and flash this 3 img files with this command
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash system SYSTEM.img
and Factory Reset
but this message at startup is normal
"Your device has been unlocked and can't be trusted"

Can't Boot into Stock ROM.

So recently i wanted to unroot, relock the bootloader and go back to factory condition. I flashed xposed too but i just deleted the app so idk if its still up?!
Unroot worked with supersu.
But then i wanted to relock the bootloader with the "Multi Tool 8".After relocking the bootloader I couldnt boot in my system so i Unlocked it again and booted into android 7!
Sadly i wanted to relock the bootloader so much, that i wiped /vendor and all other things except system and sd card in TWRP.
If i want to boot into system now , i cant. Either with bootloader unlocked or locked.
Only things i can do is going into fastboot mode or access eRecovery.
ADB and Fastboot Commands are working.
I tried to Rollback my device but its not working. What should I do now?
Sorry for my Bad englisch. My main Language is German.
1. Download honor 8 firmware from huawei firmware finder
2. Extract system.img, boot.img, recovery,img with huawei extractor tool
3. Unlock bootloader
4. Flash system.img, boot.img, recovery.img with fastboot with commands fastboot flash system system.img, fastboot flash boot boot.img,fastboot flash recovery recovery.img
4. Boot to recovery mode and factory reset and wait
5. Done. Now it should boot into the system.
Elkkooz said:
1. Download honor 8 firmware from huawei firmware finder
2. Extract system.img, boot.img, recovery,img with huawei extractor tool
3. Unlock bootloader
4. Flash system.img, boot.img, recovery.img with fastboot with commands fastboot flash system system.img, fastboot flash boot boot.img,fastboot flash recovery recovery.img
4. Boot to recovery mode and factory reset and wait
5. Done. Now it should boot into the system.
Click to expand...
Click to collapse
I will Look into that tomorrow.
Do I need TWRP recovery for the factory reset? Because in Stock Recovery i cant factory reset.
So I would flash system boot and TWRP instead of original recovery?
i cant factory reset!
Flashed system, boot and recovery successful.
But when i want to factory reset it stops by 16%

How to flash update with fastboot

Hello i've a MHA-L29C636B188 and i've installed the OpenKirin so no twrp and i want to update my phone, i've try the erecovery and dload folder but it's not working, so i can update with flash all img into fastboot ?

Categories

Resources