Database Info

CyanigenMod - VOICE [ NO ] DATA [ YES ] - WHY?!?!

I installed Cyanogem in my Defy and everything ran just fine until yesterday...
No changes at all, and the signalwas gone. No bars. I tried to call and there were no signal to complete. BUT I CAN USE 3G CONNECTION!!!
I reinstalled original SBF, y-SBF, z-SBF, delta-SBF, other roms... Nothing changes. I just have connection, not voice.
Any idead how to fix it?

Install Baseband Switcher and try to change your baseband

E qual opção eu escolho?
Abraços

Qual a sua operadora? Aqui tem a opção Brazil Claro. Mas vc pode tentar o Internacional ou Argentina. Ou perguntar pra alguém do forum que utilize a sua operadora...
abs!

"Sou da TIM. Já tentei Brazil Claro e não rolou..." -> I'm TIM user. I've already tried CLARO BRAZIL and didn't worked...

ehy guys english please!!

erickne said:
E qual opção eu escolho?
Abraços
Click to expand...
Click to collapse
Try the China basebands or US T-Mobile basebands.
the two worked for me.

None of them worked. Tmobile almost worked but failed. Anything else

What is the Original ROM com with your Defy ?
And it's a MB525 or ME525 ?

JORLA_U3_3.4.2_107-9_SIGNED_USAJORDMR1B15VIVBRLA019.0R_JORLAFROVIVBRLA_P012_A012_M002_HWp3_Service1FF.sbf
I'm not sure, but I think is this SBF.
Model MB525.

If you flash the recommended SBF, it will work without any changes in baseband. Try nordic first.
And always talk in english in a english forum

I will try nordic them stock.
One thing... With defy baseband change, when I select a different one (ANY of them - I tried all of them) it simply don't change. When I check baseband it's always EPU93_U_00.59.00.
Any Idea?

erickne said:
I will try nordic them stock.
One thing... With defy baseband change, when I select a different one (ANY of them - I tried all of them) it simply don't change. When I check baseband it's always EPU93_U_00.59.00.
Any Idea?
Click to expand...
Click to collapse
That is normal, and cosmetic. The files do change, trust baseband switcher.

ccav2000 said:
That is normal, and cosmetic. The files do change, trust baseband switcher.
Click to expand...
Click to collapse
a lot of my fellas here in manila had that prob before after they migrate to official SEA FROYO
now its ok after they do the baseband switching.

I flashed NORDIC, and had no connection. Now flashed Brazil Retail without success, but the radio bar is full and says "Only Emergency Calls". If I try a normal number I get "There are no network available". And I still get data connection online.
Please, any idea?
I'll start a challenge for U$25.00. =)

Nothing worked.
Any idea?
Already flashed chinesa, nordic, retail, t-mobile, change sim card, changed all basebands.
What is happening?!

That sounds like what happens if your IMEI is blacklisted - no phone calls or text messages will work, the phone will report "no signal" or "emergency calls only" but data still works.
Hopefully that isn't what has happened to you, but I thought I should mention it just in case

I've just answered your PM, but I didn't know you've tried stock SBF. Did you do a full wipe after flashing it? If yes, then you should try your SIM with another phone. If it works, you probably have either a hardware problem with your Defy (but I'm not sure if Data would work, and it does...), or a blacklisted IMEI, as said the friend above. Either way, have you bought your phone in an official store? If yes, you can also flash your carrier's stock sbf and complain with them!

Unlocking Verizon Moto G

I just got screwed I think.
I purchased the prepaid Moto G at Best Buy for 99$ planning to unlock it and use it in Canada (Videotron).
Advertised was that the US Moto G runs AWS (1700) frequency, thus compatible with Videotron.
To my F*** suprise, NO DAMN SIM !!!!
1. Can this phone be unlocked by anyone except Verizon ?
2. Can you program your own no. in this phone ? ( I recall that CDMA phone needs an unlock code or master unlock code to program your phone no. in it ...)
3. Does it even support AWS (Verizon version !?!?)
4. Does it have an IMEI or just the CDMA equivalent, MEID ??? (I bought this http://www.ebay.co.uk/itm/Motorola-...r-/321288929291?ssPageName=ADME:X:RTQ:GB:1123 and seller keeps asking IMEI ... )
Thanks !

masterfred said:
I just got screwed I think.
I purchased the prepaid Moto G at Best Buy for 99$ planning to unlock it and use it in Canada (Videotron).
Advertised was that the US Moto G runs AWS (1700) frequency, thus compatible with Videotron.
To my F*** suprise, NO DAMN SIM !!!!
1. Can this phone be unlocked by anyone except Verizon ?
2. Can you program your own no. in this phone ? ( I recall that CDMA phone needs an unlock code or master unlock code to program your phone no. in it ...)
3. Does it even support AWS (Verizon version !?!?)
4. Does it have an IMEI or just the CDMA equivalent, MEID ??? (I bought this http://www.ebay.co.uk/itm/Motorola-...r-/321288929291?ssPageName=ADME:X:RTQ:GB:1123 and seller keeps asking IMEI ... )
Thanks !
Click to expand...
Click to collapse
I'm pretty sure you're screwed, mate. I don't think Videotron has a CDMA network which makes your phone unusable, even if you would sbe able to unlock it. Return it and buy the US GSM model. That will work.
EDIT: There are two model in the US. GSM (AWS) and CDMA.

masterfred said:
I just got screwed I think.
I purchased the prepaid Moto G at Best Buy for 99$ planning to unlock it and use it in Canada (Videotron).
Advertised was that the US Moto G runs AWS (1700) frequency, thus compatible with Videotron.
To my F*** suprise, NO DAMN SIM !!!!
1. Can this phone be unlocked by anyone except Verizon ?
2. Can you program your own no. in this phone ? ( I recall that CDMA phone needs an unlock code or master unlock code to program your phone no. in it ...)
3. Does it even support AWS (Verizon version !?!?)
4. Does it have an IMEI or just the CDMA equivalent, MEID ??? (I bought this http://www.ebay.co.uk/itm/Motorola-...r-/321288929291?ssPageName=ADME:X:RTQ:GB:1123 and seller keeps asking IMEI ... )
Thanks !
Click to expand...
Click to collapse
The Verizon one at best buy is CDMA only i.e. no sim. That's the main reason it's $80 cheaper than the US version, and some subsidizing because it's stuck to Verizon. If you can swing it I would suggest the US version but $80 is a big price jump compared to the $99.

Oh well ! I'm back to Canada, so F** that ... just out of curiosity, what if I switch the main board assembly ?
Like this : http://www.ebay.ca/itm/OEM-MOTOROLA...e_Replacement_Parts_Tools&hash=item20dc59d4a8
Otherwise, I just found an amazing Android iPod Touch replacement ... !

steps to unlock moto g verizon
ok first sorry for my english
i can unlock my verizon moto g Phone to iusacell mexico Carrier
steps
1 get the spc with this utility MSLUtility.apk
2 connect the phone on bt tools
2.1 turn off the phone
2.2 pres and hold volume - and power
2.3 the with volume + select bp tools
3 when the phone restarts install drivers like this video
4 when you have the drivers installed, just program with dfs tools like any other cdma phone
very easy
here a video with the proof on my Moto g
Thank's
BR
sorry i cant use external links for help send mp
thanks

weso.villalobos said:
ok first sorry for my english
i can unlock my verizon moto g Phone to iusacell mexico Carrier
steps
1 get the spc with this utility MSLUtility.apk
2 connect the phone on bt tools
2.1 turn off the phone
2.2 pres and hold volume - and power
2.3 the with volume + select bp tools
3 when the phone restarts install drivers like this video
4 when you have the drivers installed, just program with dfs tools like any other cdma phone
very easy
here a video with the proof on my Moto g
Thank's
BR
sorry i cant use external links for help send mp
thanks
Click to expand...
Click to collapse
thanks bro thats works for me :good:

rubensin90 said:
thanks bro thats works for me :good:
Click to expand...
Click to collapse
Are you using a sim card with it though like AT&T

briguy15 said:
Are you using a sim card with it though like AT&T
Click to expand...
Click to collapse
Nope i use a cdma

HELP ME
Can you guide me what NV Ram you have changed or the part " just program with dfs tools like any other cdma phone"
Because i never programmed a cdma phone before.
Thank you very much.
weso.villalobos said:
ok first sorry for my english
i can unlock my verizon moto g Phone to iusacell mexico Carrier
steps
1 get the spc with this utility MSLUtility.apk
2 connect the phone on bt tools
2.1 turn off the phone
2.2 pres and hold volume - and power
2.3 the with volume + select bp tools
3 when the phone restarts install drivers like this video
4 when you have the drivers installed, just program with dfs tools like any other cdma phone
very easy
here a video with the proof on my Moto g
Thank's
BR
sorry i cant use external links for help send mp
thanks
Click to expand...
Click to collapse
rubensin90 said:
thanks bro thats works for me :good:
Click to expand...
Click to collapse

i_fain said:
Can you guide me what NV Ram you have changed or the part " just program with dfs tools like any other cdma phone"
Because i never programmed a cdma phone before.
Thank you very much.
Click to expand...
Click to collapse
I think what is meant is that you need to copy another phones cdma settings. So you will need another CDMA phone that is activated, then you need to copy everything to the moto g...
Here is a video of a guy doing it to a samsung. https://www.youtube.com/watch?v=SX9xFjKOiPI

ayuda
hola soy de mexico
necesito ayuda para poder activar mi moto g de verizon a iusacell
porfavor buscame en facebook Beto A Picazo
weso.villalobos said:
ok first sorry for my english
i can unlock my verizon moto g Phone to iusacell mexico Carrier
steps
1 get the spc with this utility MSLUtility.apk
2 connect the phone on bt tools
2.1 turn off the phone
2.2 pres and hold volume - and power
2.3 the with volume + select bp tools
3 when the phone restarts install drivers like this video
4 when you have the drivers installed, just program with dfs tools like any other cdma phone
very easy
here a video with the proof on my Moto g
Thank's
BR
sorry i cant use external links for help send mp
thanks
Click to expand...
Click to collapse

I'm sorry, where is the video? I can't see it.
And also.. this unlock means that I can use my phone with any company I want?
Thanks!

weso.villalobos said:
ok first sorry for my english
i can unlock my verizon moto g Phone to iusacell mexico Carrier
steps
1 get the spc with this utility MSLUtility.apk
2 connect the phone on bt tools
2.1 turn off the phone
2.2 pres and hold volume - and power
2.3 the with volume + select bp tools
3 when the phone restarts install drivers like this video
4 when you have the drivers installed, just program with dfs tools like any other cdma phone
very easy
here a video with the proof on my Moto g
Thank's
BR
sorry i cant use external links for help send mp
thanks
Click to expand...
Click to collapse
Hola amigo, lograste tener internet? Estoy vuelto loco solo he podido activar la linea y el teléfono en ciertos campos se reestablen a valores de verizon, agradecería tu orientación
Saludos

Unlock for telcel
Hello Mr,
es posible desbloquearlo tambien para Telcel?
Is it possible to unlock also for Telcel carrier at Mexico?
Thanks Bro
weso.villalobos said:
ok first sorry for my english
i can unlock my verizon moto g Phone to iusacell mexico Carrier
steps
1 get the spc with this utility MSLUtility.apk
2 connect the phone on bt tools
2.1 turn off the phone
2.2 pres and hold volume - and power
2.3 the with volume + select bp tools
3 when the phone restarts install drivers like this video
4 when you have the drivers installed, just program with dfs tools like any other cdma phone
very easy
here a video with the proof on my Moto g
Thank's
BR
sorry i cant use external links for help send mp
thanks
Click to expand...
Click to collapse

weso.villalobos said:
ok first sorry for my english
i can unlock my verizon moto g Phone to iusacell mexico Carrier
steps
1 get the spc with this utility MSLUtility.apk
2 connect the phone on bt tools
2.1 turn off the phone
2.2 pres and hold volume - and power
2.3 the with volume + select bp tools
3 when the phone restarts install drivers like this video
4 when you have the drivers installed, just program with dfs tools like any other cdma phone
very easy
here a video with the proof on my Moto g
Thank's
BR
sorry i cant use external links for help send mp
thanks
Click to expand...
Click to collapse
MSLUtility not work on OS KK 4.4.4.

Necesito ayuda tengo un moto g verizon cdma
weso.villalobos said:
ok first sorry for my english
i can unlock my verizon moto g Phone to iusacell mexico Carrier
steps
1 get the spc with this utility MSLUtility.apk
2 connect the phone on bt tools
2.1 turn off the phone
2.2 pres and hold volume - and power
2.3 the with volume + select bp tools
3 when the phone restarts install drivers like this video
4 when you have the drivers installed, just program with dfs tools like any other cdma phone
very easy
here a video with the proof on my Moto g
Thank's
BR
sorry i cant use external links for help send mp
thanks
Click to expand...
Click to collapse
Cres poder ayudarme a desbloquear mi moto g verizon CDMA, con iusacell ? No se exactamente que hacer... Me puedes encontrar en facebook como leonziyo facebook com/leonziyo

Please share the links how to unlock.
Hi,
you're post came as a sigh of relief. Can you please help meunlock my verizon phone.
Thank you so much,
Regards
V M
i can unlock my verizon moto g Phone to iusacell mexico Carrier
steps
1 get the spc with this utility MSLUtility.apk
2 connect the phone on bt tools
2.1 turn off the phone
2.2 pres and hold volume - and power
2.3 the with volume + select bp tools
3 when the phone restarts install drivers like this video
4 when you have the drivers installed, just program with dfs tools like any other cdma phone
very easy
here a video with the proof on my Moto g
Thank's
BR
sorry i cant use external links for help send mp
thanks[/QUOTE]

at&t h950 stock rom release date?

hi there, i have at&t g flex 2. i installed europe rom but sim card not working anymore. i tried everything (porto rico rom too) but nothing. only solution is stock at&t rom. when will it come? thanks..

You cannot revert to ATT build from PR, that will brick the phone...
Sent from my LG-H950

You tryvhidden menu and enab
le bands and wcdma acording to our phone? Wcdma is 850/1900/2100 and lte band 4
Enviado desde mi LG-H950 mediante Tapatalk

fatihcione said:
hi there, i have at&t g flex 2. i installed europe rom but sim card not working anymore. i tried everything (porto rico rom too) but nothing. only solution is stock at&t rom. when will it come? thanks..
Click to expand...
Click to collapse
Your phone is unlocked? Because the modem/radio of Europe rom doesn't work with att H950... But with PR rom should works
Sent from my LG-H950 using Tapatalk

http://forum.xda-developers.com/g-flex2/general/p-restore-recovery-to-stock-tool-h950-t3171550
did you check that post, there are every system for h950...
the problem is that if you upgrade, bootloader may be changed, so you cannot boot that system anymore.

Sj12345 said:
Your phone is unlocked? Because the modem/radio of Europe rom doesn't work with att H950... But with PR rom should works
Sent from my LG-H950 using Tapatalk
Click to expand...
Click to collapse
yes, it was unlocked. pr not really work or i dont know true modem settings.

pelelademadera said:
http://forum.xda-developers.com/g-flex2/general/p-restore-recovery-to-stock-tool-h950-t3171550
did you check that post, there are every system for h950...
the problem is that if you upgrade, bootloader may be changed, so you cannot boot that system anymore.
Click to expand...
Click to collapse
yes i checked, but i couldnt figured it out how can i restore stock system back, need serious help :\

fatihcione said:
yes, it was unlocked. pr not really work or i dont know true modem settings.
Click to expand...
Click to collapse
1. Euro rom never will works in H950
2. You need start from PR rom (modem/radio compatible)
3. when you insert the sim card, what you see? any message?

fatihcione said:
hi there, i have at&t g flex 2. i installed europe rom but sim card not working anymore. i tried everything (porto rico rom too) but nothing. only solution is stock at&t rom. when will it come? thanks..
Click to expand...
Click to collapse
Are you certain this is H950 we´re talking about?
when you hit *#06# do you get our imei #?
check the back of your phone to see model #.
Did you flash the H950PR kdz wiping the phone or did you see your files still in internal sdcard after flashing?
Sometimes a clean install should fix this.

Sj12345 said:
1. Euro rom never will works in H950
2. You need start from PR rom (modem/radio compatible)
3. when you insert the sim card, what you see? any message?
Click to expand...
Click to collapse
2. when i install pr rom, it works except sim. then i will try to reboot phone all first settings things comes back, like first phone boot. And i dont have any idea about modem/radio compatiblity too.
3. no any massage, just typing pin code then sim logo and x sign up right corner.
i cant see my imei number too, why?

@Sj12345 can you make an imei backup tool? like the ones autoprime made for the other models when you rooted it made a backup of EFS.
Just asking cause to me it seems the Crossdll to H955 messed with the phones EFS.
Thanks in advance.

[Q] Combine two ROMs (taking best of each ROMs)

Hello!
I have two ROMs (both rooted) for my Galaxy S6 edge SCV31 (SM-G925J)
First ROM has all languages enabled (wich i need) and works very good. But it only has data. It says "4g" and "No Serrvice" at the same tiem. I did not even know that is possible. I can browse internet and use data, but i can not make calls at all and noone can call me.
*#*#4636#*#* gives me Mobile network not available. attached jpg is from the ROM where calls do not work
Second ROM works for both- calls and data. But does not have languages and tweaks i want from the first ROM.
i tried to install second ROM, backup radio, and then restore the radio when first ROM is isntalled, but that did not help.
Is there any way i can take languages from one ROM and include them in the other? Or maybe there is a way to take Network settings from one ROM and include them in the other, so that i can get best from both?
Please let me know.
I have
- Windows but i can boot to Linux if necessary
- root for both ROMs
- TWRP 2.6.8
- Titanium backup.
- Recovery Backup
- can use ADB

Anyone?

Did you try this;
https://play.google.com/store/apps/details?id=com.wanam

Thank you for you reply.
Unfortunately, language enablers like MoreLocale, or LanguageEnabler or any other like the one you suggested do not work, because the languages are not just disabled. They are stripped off (deleted) completely. Therefore there is nothing to enable. (this was the first thing i tried)
Thanks anyway for suggetstion
forumber2 said:
Did you try this;
https://play.google.com/store/apps/details?id=com.wanam
Click to expand...
Click to collapse

umka83 said:
Thank you for you reply.
Unfortunately, language enablers like MoreLocale, or LanguageEnabler or any other like the one you suggested do not work, because the languages are not just disabled. They are stripped off (deleted) completely. Therefore there is nothing to enable. (this was the first thing i tried)
Thanks anyway for suggetstion
Click to expand...
Click to collapse
Hi Umka83.... Maybe i can help you! Can you give me the link of the second rom? I already build a lot of rom's for japanese Samsung devices and add languages to all of them. On my first try on building an custom rom for this model (SCV31), i have the same issues. I got the 4G and signal bars, on status bar. I can access the internet, but i can't make calls, because the device not connect to au network, resulting in No service. You have tested the sms too on the second rom? All au devices on Lollipop, are having issues with sms on custom roms. Can send sms but takes a long to receive. I notice, If i disable the data network, no issues on receiving sms.

Hello Frankbrazillian!
Thank you for yyour reply.
Here is the link for the ROMs
https://drive.google.com/folderview?id=0B3bSQBt3ttI2RUpHa1RCVFFXUUE&usp=sharing
If this can be made into a new ROM that would be great for all SCV31 users.
ありがとうございます。

umka83 said:
Hello Frankbrazillian!
Thank you for yyour reply.
Here is the link for the ROMs
https://drive.google.com/folderview?id=0B3bSQBt3ttI2RUpHa1RCVFFXUUE&usp=sharing
If this can be made into a new ROM that would be great for all SCV31 users.
ありがとうございます。
Click to expand...
Click to collapse
Thanks my friend! I'll check the link tonight, after work. I forget to ask.... The second rom is an custom firmware too or is the stock? If are an custom rom, I only need 3 days to finish the work, but If are the stock version, unfortunatelly this don't help too much, because I already tried once and failed. After that, I don't have tried anymore, because I was very busy customizing roms for others devices... Anyway I'll let you know ... thank's for share the rom!

Frankbrazillian said:
Thanks my friend! I'll check the link tonight, after work. I forget to ask.... The second rom is an custom firmware too or is the stock? If are an custom rom, I only need 3 days to finish the work, but If are the stock version, unfortunatelly this don't help too much, because I already tried once and failed. After that, I don't have tried anymore, because I was very busy customizing roms for others devices... Anyway I'll let you know ... thank's for share the rom!
Click to expand...
Click to collapse
Dear Frankbrazillian!
Thank you for your reply!
SpaceX ROM (SPACEX.SCV31KDU1AOE2_PRE-ROOT.tar.md5) is a custom ROM from here
http://choimobile.vn/threads/spacex...-fix-all-stable-s6-edgeau.57102/#post-1109235
The other ROM (SCV31KDU1AOCP_SCV31KDI1AOCP_SCV31KDU1AOCP_HOME.tar.md5) is a stock one from OTA by KDDI

umka83 said:
Dear Frankbrazillian!
Thank you for your reply!
SpaceX ROM (SPACEX.SCV31KDU1AOE2_PRE-ROOT.tar.md5) is a custom ROM from here
http://choimobile.vn/threads/spacex...-fix-all-stable-s6-edgeau.57102/#post-1109235
The other ROM (SCV31KDU1AOCP_SCV31KDI1AOCP_SCV31KDU1AOCP_HOME.tar.md5) is a stock one from OTA by KDDI
Click to expand...
Click to collapse
Thanks for reply, my friend. I got it! I'll see what I can do... About the custom rom SpaceX, I don't have tested yet, but I already know the work of this Team (Sphinx). I have tested the custom rom for the Galaxy Note Edge-SCL24. I see on choimobile homepage. The dev Manh_IT , already unlock this model, but i'm not sure if is necessary some kinda of box. Any news, i'll let you know... thanks again!

Frankbrazillian said:
Thanks for reply, my friend. I got it! I'll see what I can do... About the custom rom SpaceX, I don't have tested yet, but I already know the work of this Team (Sphinx). I have tested the custom rom for the Galaxy Note Edge-SCL24. I see on choimobile homepage. The dev Manh_IT , already unlock this model, but i'm not sure if is necessary some kinda of box. Any news, i'll let you know... thanks again!
Click to expand...
Click to collapse
i have tested SpaceX. I have Data, but no calls can be made for some reasons. Not sure why.
Thanks for reply

umka83 said:
i have tested SpaceX. I have Data, but no calls can be made for some reasons. Not sure why.
Thanks for reply
Click to expand...
Click to collapse
Last night i have tested the SpaceX rom and like you said, not working. I have tested the stock rom too and i notice, even doing any changes to system.img, just mounting the img to edit, i got the same problem. I think is dm-verity verification related. I will try to disable the dm-verity on boot.img to see what happens. Any news, i'll let you know.... thank's again, my friend!

Frankbrazillian said:
Last night i have tested the SpaceX rom and like you said, not working. I have tested the stock rom too and i notice, even doing any changes to system.img, just mounting the img to edit, i got the same problem. I think is dm-verity verification related. I will try to disable the dm-verity on boot.img to see what happens. Any news, i'll let you know.... thank's again, my friend!
Click to expand...
Click to collapse
Thank you for looking into this for me and other SCV31 users. I owe you one.
Good luck

umka83 said:
Thank you for looking into this for me and other SCV31 users. I owe you one.
Good luck
Click to expand...
Click to collapse
It's not just for you and the other users... It's for me too! Thank's! I will do my best to finish this rom, without any issues and i will share with all scv31 users. Thank's for helping me..

umka83 said:
Thank you for looking into this for me and other SCV31 users. I owe you one.
Good luck
Click to expand...
Click to collapse
Hi umka83! On my first try to build an boot.img with the dm-verity disabled, i failed! Still trying and testing. If i got everything working perfectly, i'll tell you. Have a good day!

Thanks for keeping us updated. you work is highly appreciated. ありがとうございます。

HELP
bom dia Frank, sou novo por aqui, então me desculpe se estou violando alguma regra..
só queria dizer que tenho um galaxy s6 da AU e estou ancioso pela rom scv31 ..
pena nao ter o idioma Portugues..
qualquer novidade nos comunique por favor..

umka83 said:
Thanks for keeping us updated. you work is highly appreciated. ありがとうございます。
Click to expand...
Click to collapse
Hi umka83. Unfortunatelly no working yet. Still in progress. I'll send you the link of the custom ROM on PM, for you check the progress. Any news, I'll let you know. Have a good day !
---------- Post added at 10:45 AM ---------- Previous post was at 10:25 AM ----------
Reginaldo de Oliveira said:
bom dia Frank, sou novo por aqui, então me desculpe se estou violando alguma regra..
só queria dizer que tenho um galaxy s6 da AU e estou ancioso pela rom scv31 ..
pena nao ter o idioma Portugues..
qualquer novidade nos comunique por favor..
Click to expand...
Click to collapse
Hi Reginaldo, how are you? Unfortunatelly the custom rom is not working with Au sim card. If your device are unlocked, you can use with gsm operators . One of the xda rules, is the use of the english language. You can use some translator app for that purpose. Any doubt , feel free to ask.
Olá Reginaldo, tudo bem? Infelizmente ainda não é possível utilizar uma rom customizada, com o sim card da Au. Se o seu aparelho estiver desbloqueado, vc poderá utilizar com qualquer operadora gsm. Uma das regras do Xda, é utilizar o idioma inglês. Você poderá fazer uso de algum aplicativo tradutor. Qualquer dúvida é só perguntar.

someone try this way please
I only want to give a better instruction how to unlock this model.
First, of course, you need this great box, Z3X. Then you need SPT box to write super IMEI.
BEFORE DOING ANYTHING, WRITE DOWN THE ORIGINAL IMEI # somewhere. Make sure you know the original IMEI
1). Flash Combination file using Odin. After flashing, phone will be in Factory Binary Mode. Tab one Android logos at the bottom of the screen to get to dial pad and enter *#0808# and select DM+MTP+ADB then OK.
2). Use Z3X, select the SCV31 model and go to Repair tab and press on Reset MSL.
3). Write down the phone's original IMEI# somewhere and save it. Use SPT box and go to Service tab and in Repair IMEI, enter this super IMEI : 358012060753038 (this is an original factory unlocked IMEI) Use C3300 UART cable and write new IMEI to phone. After it finished, check to make sure you have the new IMEI in phone.
4). Flash FULL flash files (BL, AP, CP, CSC) and no need PIT file, using Odin.
5). After flashing full flash files, inset any SIM card, phone boots up and go to WIFI and turn on. Go to Settings>>About>>SIM card status. You should see Status: Not allowed. Tab on "Update SIM card status" at the bottom of the screen then wait until it finished and reboot. Go back to SIM card Status again and see if it shows Status: Allowed. If it is, then you're good to go to the next steps.
6). Repeat Step 1,2, and 3, except in Step 3, enter phone's ORIGINAL IMEI. After all steps done, check to make sure you have original IMEI in phone now.
7). Now flash FULL flash files (BL,AP,CP,CSC) again. After flashing is done, phone should be now UNLOCKED.
If you want to remove AU Japanese contents in ROM, you can flash this SPACX ROM using Odin:
I could not post the link because I'm new on the site
======https://drive.google.com/file/d/0B7M...w?pref=2&pli=1[/url] Senha: fullscv31 ====

Reginaldo de Oliveira said:
I only want to give a better instruction how to unlock this model.
First, of course, you need this great box, Z3X. Then you need SPT box to write super IMEI.
BEFORE DOING ANYTHING, WRITE DOWN THE ORIGINAL IMEI # somewhere. Make sure you know the original IMEI
1). Flash Combination file using Odin. After flashing, phone will be in Factory Binary Mode. Tab one Android logos at the bottom of the screen to get to dial pad and enter *#0808# and select DM+MTP+ADB then OK.
2). Use Z3X, select the SCV31 model and go to Repair tab and press on Reset MSL.
3). Write down the phone's original IMEI# somewhere and save it. Use SPT box and go to Service tab and in Repair IMEI, enter this super IMEI : 358012060753038 (this is an original factory unlocked IMEI) Use C3300 UART cable and write new IMEI to phone. After it finished, check to make sure you have the new IMEI in phone.
4). Flash FULL flash files (BL, AP, CP, CSC) and no need PIT file, using Odin.
5). After flashing full flash files, inset any SIM card, phone boots up and go to WIFI and turn on. Go to Settings>>About>>SIM card status. You should see Status: Not allowed. Tab on "Update SIM card status" at the bottom of the screen then wait until it finished and reboot. Go back to SIM card Status again and see if it shows Status: Allowed. If it is, then you're good to go to the next steps.
6). Repeat Step 1,2, and 3, except in Step 3, enter phone's ORIGINAL IMEI. After all steps done, check to make sure you have original IMEI in phone now.
7). Now flash FULL flash files (BL,AP,CP,CSC) again. After flashing is done, phone should be now UNLOCKED.
If you want to remove AU Japanese contents in ROM, you can flash this SPACX ROM using Odin:
I could not post the link because I'm new on the site
======https://drive.google.com/file/d/0B7M...w?pref=2&pli=1[/url] Senha: fullscv31 ====
Click to expand...
Click to collapse
I already have seen this method and is confirmed to work, but for this is necessary the Z3X and SPT box.

I have Z3X box, Can I buy the SPT but for that I need to know if this method is actually valid ..

Flashing different model firmware onto G930VL

Hello,
I bought a G930VL (Straight-Talk) S7 a few months ago, but I'd like to use it on a different service, specifically ting, to save money.
I have read about others flashing the G930V firmware onto the G930VL and successfully using the phone on Verizon.
I'm unsure of what model firmware to flash however to make it work with ting (G930V vs G930U vs G930F), or where to find a guide I can follow to go about doing this.
Thanks for any help,
Matt

Voonex said:
Hello,
I bought a G930VL (Straight-Talk) S7 a few months ago, but I'd like to use it on a different service, specifically ting, to save money.
I have read about others flashing the G930V firmware onto the G930VL and successfully using the phone on Verizon.
I'm unsure of what model firmware to flash however to make it work with ting (G930V vs G930U vs G930F), or where to find a guide I can follow to go about doing this.
Thanks for any help,
Matt
Click to expand...
Click to collapse
All I know is the U software is way better after ya locate a way to unlock the bootloader on the phone so it wouldnt interferes with other security part and lock ya from using it at all bricked software iv'e done it with a galaxy proclaim a while back and I really love it without cell service preinstalled locked bloatware tht ya cant completely uninstall em but uninstalled updates for em and disable em is comes close to u firmware